Loading...
Note: File does not exist in v6.8.
1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/iio/qcom,spmi-vadc.h>
3#include <dt-bindings/interrupt-controller/irq.h>
4#include <dt-bindings/spmi/spmi.h>
5
6&spmi_bus {
7
8 pm8941_0: pm8941@0 {
9 compatible = "qcom,pm8941", "qcom,spmi-pmic";
10 reg = <0x0 SPMI_USID>;
11 #address-cells = <1>;
12 #size-cells = <0>;
13
14 rtc@6000 {
15 compatible = "qcom,pm8941-rtc";
16 reg = <0x6000>,
17 <0x6100>;
18 reg-names = "rtc", "alarm";
19 interrupts = <0x0 0x61 0x1 IRQ_TYPE_EDGE_RISING>;
20 };
21
22 pwrkey@800 {
23 compatible = "qcom,pm8941-pwrkey";
24 reg = <0x800>;
25 interrupts = <0x0 0x8 0 IRQ_TYPE_EDGE_BOTH>;
26 debounce = <15625>;
27 bias-pull-up;
28 };
29
30 usb_id: misc@900 {
31 compatible = "qcom,pm8941-misc";
32 reg = <0x900>;
33 interrupts = <0x0 0x9 0 IRQ_TYPE_EDGE_BOTH>;
34 interrupt-names = "usb_id";
35 };
36
37 smbb: charger@1000 {
38 compatible = "qcom,pm8941-charger";
39 reg = <0x1000>;
40 interrupts = <0x0 0x10 7 IRQ_TYPE_EDGE_BOTH>,
41 <0x0 0x10 5 IRQ_TYPE_EDGE_BOTH>,
42 <0x0 0x10 4 IRQ_TYPE_EDGE_BOTH>,
43 <0x0 0x12 1 IRQ_TYPE_EDGE_BOTH>,
44 <0x0 0x12 0 IRQ_TYPE_EDGE_BOTH>,
45 <0x0 0x13 2 IRQ_TYPE_EDGE_BOTH>,
46 <0x0 0x13 1 IRQ_TYPE_EDGE_BOTH>,
47 <0x0 0x14 1 IRQ_TYPE_EDGE_BOTH>;
48 interrupt-names = "chg-done",
49 "chg-fast",
50 "chg-trkl",
51 "bat-temp-ok",
52 "bat-present",
53 "chg-gone",
54 "usb-valid",
55 "dc-valid";
56
57 usb-otg-in-supply = <&pm8941_5vs1>;
58
59 chg_otg: otg-vbus { };
60 };
61
62 pm8941_gpios: gpios@c000 {
63 compatible = "qcom,pm8941-gpio", "qcom,spmi-gpio";
64 reg = <0xc000>;
65 gpio-controller;
66 #gpio-cells = <2>;
67 interrupts = <0 0xc0 0 IRQ_TYPE_NONE>,
68 <0 0xc1 0 IRQ_TYPE_NONE>,
69 <0 0xc2 0 IRQ_TYPE_NONE>,
70 <0 0xc3 0 IRQ_TYPE_NONE>,
71 <0 0xc4 0 IRQ_TYPE_NONE>,
72 <0 0xc5 0 IRQ_TYPE_NONE>,
73 <0 0xc6 0 IRQ_TYPE_NONE>,
74 <0 0xc7 0 IRQ_TYPE_NONE>,
75 <0 0xc8 0 IRQ_TYPE_NONE>,
76 <0 0xc9 0 IRQ_TYPE_NONE>,
77 <0 0xca 0 IRQ_TYPE_NONE>,
78 <0 0xcb 0 IRQ_TYPE_NONE>,
79 <0 0xcc 0 IRQ_TYPE_NONE>,
80 <0 0xcd 0 IRQ_TYPE_NONE>,
81 <0 0xce 0 IRQ_TYPE_NONE>,
82 <0 0xcf 0 IRQ_TYPE_NONE>,
83 <0 0xd0 0 IRQ_TYPE_NONE>,
84 <0 0xd1 0 IRQ_TYPE_NONE>,
85 <0 0xd2 0 IRQ_TYPE_NONE>,
86 <0 0xd3 0 IRQ_TYPE_NONE>,
87 <0 0xd4 0 IRQ_TYPE_NONE>,
88 <0 0xd5 0 IRQ_TYPE_NONE>,
89 <0 0xd6 0 IRQ_TYPE_NONE>,
90 <0 0xd7 0 IRQ_TYPE_NONE>,
91 <0 0xd8 0 IRQ_TYPE_NONE>,
92 <0 0xd9 0 IRQ_TYPE_NONE>,
93 <0 0xda 0 IRQ_TYPE_NONE>,
94 <0 0xdb 0 IRQ_TYPE_NONE>,
95 <0 0xdc 0 IRQ_TYPE_NONE>,
96 <0 0xdd 0 IRQ_TYPE_NONE>,
97 <0 0xde 0 IRQ_TYPE_NONE>,
98 <0 0xdf 0 IRQ_TYPE_NONE>,
99 <0 0xe0 0 IRQ_TYPE_NONE>,
100 <0 0xe1 0 IRQ_TYPE_NONE>,
101 <0 0xe2 0 IRQ_TYPE_NONE>,
102 <0 0xe3 0 IRQ_TYPE_NONE>;
103
104 boost_bypass_n_pin: boost-bypass {
105 pins = "gpio21";
106 function = "normal";
107 };
108 };
109
110 pm8941_mpps: mpps@a000 {
111 compatible = "qcom,pm8941-mpp", "qcom,spmi-mpp";
112 reg = <0xa000>;
113 gpio-controller;
114 #gpio-cells = <2>;
115 interrupts = <0 0xa0 0 IRQ_TYPE_NONE>,
116 <0 0xa1 0 IRQ_TYPE_NONE>,
117 <0 0xa2 0 IRQ_TYPE_NONE>,
118 <0 0xa3 0 IRQ_TYPE_NONE>,
119 <0 0xa4 0 IRQ_TYPE_NONE>,
120 <0 0xa5 0 IRQ_TYPE_NONE>,
121 <0 0xa6 0 IRQ_TYPE_NONE>,
122 <0 0xa7 0 IRQ_TYPE_NONE>;
123 };
124
125 pm8941_temp: temp-alarm@2400 {
126 compatible = "qcom,spmi-temp-alarm";
127 reg = <0x2400>;
128 interrupts = <0 0x24 0 IRQ_TYPE_EDGE_RISING>;
129 io-channels = <&pm8941_vadc VADC_DIE_TEMP>;
130 io-channel-names = "thermal";
131 #thermal-sensor-cells = <0>;
132 };
133
134 pm8941_vadc: vadc@3100 {
135 compatible = "qcom,spmi-vadc";
136 reg = <0x3100>;
137 interrupts = <0x0 0x31 0x0 IRQ_TYPE_EDGE_RISING>;
138 #address-cells = <1>;
139 #size-cells = <0>;
140 #io-channel-cells = <1>;
141
142 die_temp {
143 reg = <VADC_DIE_TEMP>;
144 };
145 ref_625mv {
146 reg = <VADC_REF_625MV>;
147 };
148 ref_1250v {
149 reg = <VADC_REF_1250MV>;
150 };
151 ref_gnd {
152 reg = <VADC_GND_REF>;
153 };
154 ref_vdd {
155 reg = <VADC_VDD_VADC>;
156 };
157 };
158
159 pm8941_iadc: iadc@3600 {
160 compatible = "qcom,pm8941-iadc", "qcom,spmi-iadc";
161 reg = <0x3600>;
162 interrupts = <0x0 0x36 0x0 IRQ_TYPE_EDGE_RISING>;
163 qcom,external-resistor-micro-ohms = <10000>;
164 };
165
166 coincell@2800 {
167 compatible = "qcom,pm8941-coincell";
168 reg = <0x2800>;
169 status = "disabled";
170 };
171 };
172
173 pm8941_1: pm8941@1 {
174 compatible = "qcom,pm8941", "qcom,spmi-pmic";
175 reg = <0x1 SPMI_USID>;
176 #address-cells = <1>;
177 #size-cells = <0>;
178
179 pm8941_wled: wled@d800 {
180 compatible = "qcom,pm8941-wled";
181 reg = <0xd800>;
182 label = "backlight";
183
184 status = "disabled";
185 };
186
187 regulators {
188 compatible = "qcom,pm8941-regulators";
189 interrupts = <0x1 0x83 0x2 0>, <0x1 0x84 0x2 0>;
190 interrupt-names = "ocp-5vs1", "ocp-5vs2";
191 vin_5vs-supply = <&pm8941_5v>;
192
193 pm8941_5v: s4 {
194 regulator-min-microvolt = <5000000>;
195 regulator-max-microvolt = <5000000>;
196 regulator-enable-ramp-delay = <500>;
197 };
198
199 pm8941_5vs1: 5vs1 {
200 regulator-enable-ramp-delay = <1000>;
201 regulator-pull-down;
202 regulator-over-current-protection;
203 qcom,ocp-max-retries = <10>;
204 qcom,ocp-retry-delay = <30>;
205 qcom,vs-soft-start-strength = <0>;
206 regulator-initial-mode = <1>;
207 };
208 };
209 };
210};