Loading...
1/*
2 * Microchip ENC28J60 ethernet driver (MAC + PHY)
3 *
4 * Copyright (C) 2007 Eurek srl
5 * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
6 * based on enc28j60.c written by David Anders for 2.4 kernel version
7 *
8 * This program is free software; you can redistribute it and/or modify
9 * it under the terms of the GNU General Public License as published by
10 * the Free Software Foundation; either version 2 of the License, or
11 * (at your option) any later version.
12 *
13 * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
14 */
15
16#include <linux/module.h>
17#include <linux/kernel.h>
18#include <linux/types.h>
19#include <linux/fcntl.h>
20#include <linux/interrupt.h>
21#include <linux/string.h>
22#include <linux/errno.h>
23#include <linux/init.h>
24#include <linux/netdevice.h>
25#include <linux/etherdevice.h>
26#include <linux/ethtool.h>
27#include <linux/tcp.h>
28#include <linux/skbuff.h>
29#include <linux/delay.h>
30#include <linux/spi/spi.h>
31#include <linux/of_net.h>
32
33#include "enc28j60_hw.h"
34
35#define DRV_NAME "enc28j60"
36#define DRV_VERSION "1.02"
37
38#define SPI_OPLEN 1
39
40#define ENC28J60_MSG_DEFAULT \
41 (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
42
43/* Buffer size required for the largest SPI transfer (i.e., reading a
44 * frame). */
45#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
46
47#define TX_TIMEOUT (4 * HZ)
48
49/* Max TX retries in case of collision as suggested by errata datasheet */
50#define MAX_TX_RETRYCOUNT 16
51
52enum {
53 RXFILTER_NORMAL,
54 RXFILTER_MULTI,
55 RXFILTER_PROMISC
56};
57
58/* Driver local data */
59struct enc28j60_net {
60 struct net_device *netdev;
61 struct spi_device *spi;
62 struct mutex lock;
63 struct sk_buff *tx_skb;
64 struct work_struct tx_work;
65 struct work_struct irq_work;
66 struct work_struct setrx_work;
67 struct work_struct restart_work;
68 u8 bank; /* current register bank selected */
69 u16 next_pk_ptr; /* next packet pointer within FIFO */
70 u16 max_pk_counter; /* statistics: max packet counter */
71 u16 tx_retry_count;
72 bool hw_enable;
73 bool full_duplex;
74 int rxfilter;
75 u32 msg_enable;
76 u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
77};
78
79/* use ethtool to change the level for any given device */
80static struct {
81 u32 msg_enable;
82} debug = { -1 };
83
84/*
85 * SPI read buffer
86 * wait for the SPI transfer and copy received data to destination
87 */
88static int
89spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
90{
91 u8 *rx_buf = priv->spi_transfer_buf + 4;
92 u8 *tx_buf = priv->spi_transfer_buf;
93 struct spi_transfer tx = {
94 .tx_buf = tx_buf,
95 .len = SPI_OPLEN,
96 };
97 struct spi_transfer rx = {
98 .rx_buf = rx_buf,
99 .len = len,
100 };
101 struct spi_message msg;
102 int ret;
103
104 tx_buf[0] = ENC28J60_READ_BUF_MEM;
105
106 spi_message_init(&msg);
107 spi_message_add_tail(&tx, &msg);
108 spi_message_add_tail(&rx, &msg);
109
110 ret = spi_sync(priv->spi, &msg);
111 if (ret == 0) {
112 memcpy(data, rx_buf, len);
113 ret = msg.status;
114 }
115 if (ret && netif_msg_drv(priv))
116 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
117 __func__, ret);
118
119 return ret;
120}
121
122/*
123 * SPI write buffer
124 */
125static int spi_write_buf(struct enc28j60_net *priv, int len,
126 const u8 *data)
127{
128 int ret;
129
130 if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
131 ret = -EINVAL;
132 else {
133 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
134 memcpy(&priv->spi_transfer_buf[1], data, len);
135 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
136 if (ret && netif_msg_drv(priv))
137 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
138 __func__, ret);
139 }
140 return ret;
141}
142
143/*
144 * basic SPI read operation
145 */
146static u8 spi_read_op(struct enc28j60_net *priv, u8 op,
147 u8 addr)
148{
149 u8 tx_buf[2];
150 u8 rx_buf[4];
151 u8 val = 0;
152 int ret;
153 int slen = SPI_OPLEN;
154
155 /* do dummy read if needed */
156 if (addr & SPRD_MASK)
157 slen++;
158
159 tx_buf[0] = op | (addr & ADDR_MASK);
160 ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
161 if (ret)
162 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
163 __func__, ret);
164 else
165 val = rx_buf[slen - 1];
166
167 return val;
168}
169
170/*
171 * basic SPI write operation
172 */
173static int spi_write_op(struct enc28j60_net *priv, u8 op,
174 u8 addr, u8 val)
175{
176 int ret;
177
178 priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
179 priv->spi_transfer_buf[1] = val;
180 ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
181 if (ret && netif_msg_drv(priv))
182 printk(KERN_DEBUG DRV_NAME ": %s() failed: ret = %d\n",
183 __func__, ret);
184 return ret;
185}
186
187static void enc28j60_soft_reset(struct enc28j60_net *priv)
188{
189 if (netif_msg_hw(priv))
190 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
191
192 spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
193 /* Errata workaround #1, CLKRDY check is unreliable,
194 * delay at least 1 mS instead */
195 udelay(2000);
196}
197
198/*
199 * select the current register bank if necessary
200 */
201static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
202{
203 u8 b = (addr & BANK_MASK) >> 5;
204
205 /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
206 * are present in all banks, no need to switch bank
207 */
208 if (addr >= EIE && addr <= ECON1)
209 return;
210
211 /* Clear or set each bank selection bit as needed */
212 if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
213 if (b & ECON1_BSEL0)
214 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
215 ECON1_BSEL0);
216 else
217 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
218 ECON1_BSEL0);
219 }
220 if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
221 if (b & ECON1_BSEL1)
222 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
223 ECON1_BSEL1);
224 else
225 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
226 ECON1_BSEL1);
227 }
228 priv->bank = b;
229}
230
231/*
232 * Register access routines through the SPI bus.
233 * Every register access comes in two flavours:
234 * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
235 * atomically more than one register
236 * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
237 *
238 * Some registers can be accessed through the bit field clear and
239 * bit field set to avoid a read modify write cycle.
240 */
241
242/*
243 * Register bit field Set
244 */
245static void nolock_reg_bfset(struct enc28j60_net *priv,
246 u8 addr, u8 mask)
247{
248 enc28j60_set_bank(priv, addr);
249 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
250}
251
252static void locked_reg_bfset(struct enc28j60_net *priv,
253 u8 addr, u8 mask)
254{
255 mutex_lock(&priv->lock);
256 nolock_reg_bfset(priv, addr, mask);
257 mutex_unlock(&priv->lock);
258}
259
260/*
261 * Register bit field Clear
262 */
263static void nolock_reg_bfclr(struct enc28j60_net *priv,
264 u8 addr, u8 mask)
265{
266 enc28j60_set_bank(priv, addr);
267 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
268}
269
270static void locked_reg_bfclr(struct enc28j60_net *priv,
271 u8 addr, u8 mask)
272{
273 mutex_lock(&priv->lock);
274 nolock_reg_bfclr(priv, addr, mask);
275 mutex_unlock(&priv->lock);
276}
277
278/*
279 * Register byte read
280 */
281static int nolock_regb_read(struct enc28j60_net *priv,
282 u8 address)
283{
284 enc28j60_set_bank(priv, address);
285 return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
286}
287
288static int locked_regb_read(struct enc28j60_net *priv,
289 u8 address)
290{
291 int ret;
292
293 mutex_lock(&priv->lock);
294 ret = nolock_regb_read(priv, address);
295 mutex_unlock(&priv->lock);
296
297 return ret;
298}
299
300/*
301 * Register word read
302 */
303static int nolock_regw_read(struct enc28j60_net *priv,
304 u8 address)
305{
306 int rl, rh;
307
308 enc28j60_set_bank(priv, address);
309 rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
310 rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
311
312 return (rh << 8) | rl;
313}
314
315static int locked_regw_read(struct enc28j60_net *priv,
316 u8 address)
317{
318 int ret;
319
320 mutex_lock(&priv->lock);
321 ret = nolock_regw_read(priv, address);
322 mutex_unlock(&priv->lock);
323
324 return ret;
325}
326
327/*
328 * Register byte write
329 */
330static void nolock_regb_write(struct enc28j60_net *priv,
331 u8 address, u8 data)
332{
333 enc28j60_set_bank(priv, address);
334 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
335}
336
337static void locked_regb_write(struct enc28j60_net *priv,
338 u8 address, u8 data)
339{
340 mutex_lock(&priv->lock);
341 nolock_regb_write(priv, address, data);
342 mutex_unlock(&priv->lock);
343}
344
345/*
346 * Register word write
347 */
348static void nolock_regw_write(struct enc28j60_net *priv,
349 u8 address, u16 data)
350{
351 enc28j60_set_bank(priv, address);
352 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
353 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
354 (u8) (data >> 8));
355}
356
357static void locked_regw_write(struct enc28j60_net *priv,
358 u8 address, u16 data)
359{
360 mutex_lock(&priv->lock);
361 nolock_regw_write(priv, address, data);
362 mutex_unlock(&priv->lock);
363}
364
365/*
366 * Buffer memory read
367 * Select the starting address and execute a SPI buffer read
368 */
369static void enc28j60_mem_read(struct enc28j60_net *priv,
370 u16 addr, int len, u8 *data)
371{
372 mutex_lock(&priv->lock);
373 nolock_regw_write(priv, ERDPTL, addr);
374#ifdef CONFIG_ENC28J60_WRITEVERIFY
375 if (netif_msg_drv(priv)) {
376 u16 reg;
377 reg = nolock_regw_read(priv, ERDPTL);
378 if (reg != addr)
379 printk(KERN_DEBUG DRV_NAME ": %s() error writing ERDPT "
380 "(0x%04x - 0x%04x)\n", __func__, reg, addr);
381 }
382#endif
383 spi_read_buf(priv, len, data);
384 mutex_unlock(&priv->lock);
385}
386
387/*
388 * Write packet to enc28j60 TX buffer memory
389 */
390static void
391enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
392{
393 mutex_lock(&priv->lock);
394 /* Set the write pointer to start of transmit buffer area */
395 nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
396#ifdef CONFIG_ENC28J60_WRITEVERIFY
397 if (netif_msg_drv(priv)) {
398 u16 reg;
399 reg = nolock_regw_read(priv, EWRPTL);
400 if (reg != TXSTART_INIT)
401 printk(KERN_DEBUG DRV_NAME
402 ": %s() ERWPT:0x%04x != 0x%04x\n",
403 __func__, reg, TXSTART_INIT);
404 }
405#endif
406 /* Set the TXND pointer to correspond to the packet size given */
407 nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
408 /* write per-packet control byte */
409 spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
410 if (netif_msg_hw(priv))
411 printk(KERN_DEBUG DRV_NAME
412 ": %s() after control byte ERWPT:0x%04x\n",
413 __func__, nolock_regw_read(priv, EWRPTL));
414 /* copy the packet into the transmit buffer */
415 spi_write_buf(priv, len, data);
416 if (netif_msg_hw(priv))
417 printk(KERN_DEBUG DRV_NAME
418 ": %s() after write packet ERWPT:0x%04x, len=%d\n",
419 __func__, nolock_regw_read(priv, EWRPTL), len);
420 mutex_unlock(&priv->lock);
421}
422
423static unsigned long msec20_to_jiffies;
424
425static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
426{
427 unsigned long timeout = jiffies + msec20_to_jiffies;
428
429 /* 20 msec timeout read */
430 while ((nolock_regb_read(priv, reg) & mask) != val) {
431 if (time_after(jiffies, timeout)) {
432 if (netif_msg_drv(priv))
433 dev_dbg(&priv->spi->dev,
434 "reg %02x ready timeout!\n", reg);
435 return -ETIMEDOUT;
436 }
437 cpu_relax();
438 }
439 return 0;
440}
441
442/*
443 * Wait until the PHY operation is complete.
444 */
445static int wait_phy_ready(struct enc28j60_net *priv)
446{
447 return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
448}
449
450/*
451 * PHY register read
452 * PHY registers are not accessed directly, but through the MII
453 */
454static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
455{
456 u16 ret;
457
458 mutex_lock(&priv->lock);
459 /* set the PHY register address */
460 nolock_regb_write(priv, MIREGADR, address);
461 /* start the register read operation */
462 nolock_regb_write(priv, MICMD, MICMD_MIIRD);
463 /* wait until the PHY read completes */
464 wait_phy_ready(priv);
465 /* quit reading */
466 nolock_regb_write(priv, MICMD, 0x00);
467 /* return the data */
468 ret = nolock_regw_read(priv, MIRDL);
469 mutex_unlock(&priv->lock);
470
471 return ret;
472}
473
474static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
475{
476 int ret;
477
478 mutex_lock(&priv->lock);
479 /* set the PHY register address */
480 nolock_regb_write(priv, MIREGADR, address);
481 /* write the PHY data */
482 nolock_regw_write(priv, MIWRL, data);
483 /* wait until the PHY write completes and return */
484 ret = wait_phy_ready(priv);
485 mutex_unlock(&priv->lock);
486
487 return ret;
488}
489
490/*
491 * Program the hardware MAC address from dev->dev_addr.
492 */
493static int enc28j60_set_hw_macaddr(struct net_device *ndev)
494{
495 int ret;
496 struct enc28j60_net *priv = netdev_priv(ndev);
497
498 mutex_lock(&priv->lock);
499 if (!priv->hw_enable) {
500 if (netif_msg_drv(priv))
501 printk(KERN_INFO DRV_NAME
502 ": %s: Setting MAC address to %pM\n",
503 ndev->name, ndev->dev_addr);
504 /* NOTE: MAC address in ENC28J60 is byte-backward */
505 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
506 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
507 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
508 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
509 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
510 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
511 ret = 0;
512 } else {
513 if (netif_msg_drv(priv))
514 printk(KERN_DEBUG DRV_NAME
515 ": %s() Hardware must be disabled to set "
516 "Mac address\n", __func__);
517 ret = -EBUSY;
518 }
519 mutex_unlock(&priv->lock);
520 return ret;
521}
522
523/*
524 * Store the new hardware address in dev->dev_addr, and update the MAC.
525 */
526static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
527{
528 struct sockaddr *address = addr;
529
530 if (netif_running(dev))
531 return -EBUSY;
532 if (!is_valid_ether_addr(address->sa_data))
533 return -EADDRNOTAVAIL;
534
535 memcpy(dev->dev_addr, address->sa_data, dev->addr_len);
536 return enc28j60_set_hw_macaddr(dev);
537}
538
539/*
540 * Debug routine to dump useful register contents
541 */
542static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
543{
544 mutex_lock(&priv->lock);
545 printk(KERN_DEBUG DRV_NAME " %s\n"
546 "HwRevID: 0x%02x\n"
547 "Cntrl: ECON1 ECON2 ESTAT EIR EIE\n"
548 " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n"
549 "MAC : MACON1 MACON3 MACON4\n"
550 " 0x%02x 0x%02x 0x%02x\n"
551 "Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
552 " 0x%04x 0x%04x 0x%04x 0x%04x "
553 "0x%02x 0x%02x 0x%04x\n"
554 "Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n"
555 " 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n",
556 msg, nolock_regb_read(priv, EREVID),
557 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
558 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
559 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
560 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
561 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
562 nolock_regw_read(priv, ERXWRPTL),
563 nolock_regw_read(priv, ERXRDPTL),
564 nolock_regb_read(priv, ERXFCON),
565 nolock_regb_read(priv, EPKTCNT),
566 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
567 nolock_regw_read(priv, ETXNDL),
568 nolock_regb_read(priv, MACLCON1),
569 nolock_regb_read(priv, MACLCON2),
570 nolock_regb_read(priv, MAPHSUP));
571 mutex_unlock(&priv->lock);
572}
573
574/*
575 * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
576 */
577static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
578{
579 u16 erxrdpt;
580
581 if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
582 erxrdpt = end;
583 else
584 erxrdpt = next_packet_ptr - 1;
585
586 return erxrdpt;
587}
588
589/*
590 * Calculate wrap around when reading beyond the end of the RX buffer
591 */
592static u16 rx_packet_start(u16 ptr)
593{
594 if (ptr + RSV_SIZE > RXEND_INIT)
595 return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
596 else
597 return ptr + RSV_SIZE;
598}
599
600static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
601{
602 u16 erxrdpt;
603
604 if (start > 0x1FFF || end > 0x1FFF || start > end) {
605 if (netif_msg_drv(priv))
606 printk(KERN_ERR DRV_NAME ": %s(%d, %d) RXFIFO "
607 "bad parameters!\n", __func__, start, end);
608 return;
609 }
610 /* set receive buffer start + end */
611 priv->next_pk_ptr = start;
612 nolock_regw_write(priv, ERXSTL, start);
613 erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
614 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
615 nolock_regw_write(priv, ERXNDL, end);
616}
617
618static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
619{
620 if (start > 0x1FFF || end > 0x1FFF || start > end) {
621 if (netif_msg_drv(priv))
622 printk(KERN_ERR DRV_NAME ": %s(%d, %d) TXFIFO "
623 "bad parameters!\n", __func__, start, end);
624 return;
625 }
626 /* set transmit buffer start + end */
627 nolock_regw_write(priv, ETXSTL, start);
628 nolock_regw_write(priv, ETXNDL, end);
629}
630
631/*
632 * Low power mode shrinks power consumption about 100x, so we'd like
633 * the chip to be in that mode whenever it's inactive. (However, we
634 * can't stay in lowpower mode during suspend with WOL active.)
635 */
636static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
637{
638 if (netif_msg_drv(priv))
639 dev_dbg(&priv->spi->dev, "%s power...\n",
640 is_low ? "low" : "high");
641
642 mutex_lock(&priv->lock);
643 if (is_low) {
644 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
645 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
646 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
647 /* ECON2_VRPS was set during initialization */
648 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
649 } else {
650 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
651 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
652 /* caller sets ECON1_RXEN */
653 }
654 mutex_unlock(&priv->lock);
655}
656
657static int enc28j60_hw_init(struct enc28j60_net *priv)
658{
659 u8 reg;
660
661 if (netif_msg_drv(priv))
662 printk(KERN_DEBUG DRV_NAME ": %s() - %s\n", __func__,
663 priv->full_duplex ? "FullDuplex" : "HalfDuplex");
664
665 mutex_lock(&priv->lock);
666 /* first reset the chip */
667 enc28j60_soft_reset(priv);
668 /* Clear ECON1 */
669 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
670 priv->bank = 0;
671 priv->hw_enable = false;
672 priv->tx_retry_count = 0;
673 priv->max_pk_counter = 0;
674 priv->rxfilter = RXFILTER_NORMAL;
675 /* enable address auto increment and voltage regulator powersave */
676 nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
677
678 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
679 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
680 mutex_unlock(&priv->lock);
681
682 /*
683 * Check the RevID.
684 * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
685 * damaged
686 */
687 reg = locked_regb_read(priv, EREVID);
688 if (netif_msg_drv(priv))
689 printk(KERN_INFO DRV_NAME ": chip RevID: 0x%02x\n", reg);
690 if (reg == 0x00 || reg == 0xff) {
691 if (netif_msg_drv(priv))
692 printk(KERN_DEBUG DRV_NAME ": %s() Invalid RevId %d\n",
693 __func__, reg);
694 return 0;
695 }
696
697 /* default filter mode: (unicast OR broadcast) AND crc valid */
698 locked_regb_write(priv, ERXFCON,
699 ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
700
701 /* enable MAC receive */
702 locked_regb_write(priv, MACON1,
703 MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
704 /* enable automatic padding and CRC operations */
705 if (priv->full_duplex) {
706 locked_regb_write(priv, MACON3,
707 MACON3_PADCFG0 | MACON3_TXCRCEN |
708 MACON3_FRMLNEN | MACON3_FULDPX);
709 /* set inter-frame gap (non-back-to-back) */
710 locked_regb_write(priv, MAIPGL, 0x12);
711 /* set inter-frame gap (back-to-back) */
712 locked_regb_write(priv, MABBIPG, 0x15);
713 } else {
714 locked_regb_write(priv, MACON3,
715 MACON3_PADCFG0 | MACON3_TXCRCEN |
716 MACON3_FRMLNEN);
717 locked_regb_write(priv, MACON4, 1 << 6); /* DEFER bit */
718 /* set inter-frame gap (non-back-to-back) */
719 locked_regw_write(priv, MAIPGL, 0x0C12);
720 /* set inter-frame gap (back-to-back) */
721 locked_regb_write(priv, MABBIPG, 0x12);
722 }
723 /*
724 * MACLCON1 (default)
725 * MACLCON2 (default)
726 * Set the maximum packet size which the controller will accept
727 */
728 locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
729
730 /* Configure LEDs */
731 if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
732 return 0;
733
734 if (priv->full_duplex) {
735 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
736 return 0;
737 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
738 return 0;
739 } else {
740 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
741 return 0;
742 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
743 return 0;
744 }
745 if (netif_msg_hw(priv))
746 enc28j60_dump_regs(priv, "Hw initialized.");
747
748 return 1;
749}
750
751static void enc28j60_hw_enable(struct enc28j60_net *priv)
752{
753 /* enable interrupts */
754 if (netif_msg_hw(priv))
755 printk(KERN_DEBUG DRV_NAME ": %s() enabling interrupts.\n",
756 __func__);
757
758 enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
759
760 mutex_lock(&priv->lock);
761 nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
762 EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
763 nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
764 EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
765
766 /* enable receive logic */
767 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
768 priv->hw_enable = true;
769 mutex_unlock(&priv->lock);
770}
771
772static void enc28j60_hw_disable(struct enc28j60_net *priv)
773{
774 mutex_lock(&priv->lock);
775 /* disable interrutps and packet reception */
776 nolock_regb_write(priv, EIE, 0x00);
777 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
778 priv->hw_enable = false;
779 mutex_unlock(&priv->lock);
780}
781
782static int
783enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
784{
785 struct enc28j60_net *priv = netdev_priv(ndev);
786 int ret = 0;
787
788 if (!priv->hw_enable) {
789 /* link is in low power mode now; duplex setting
790 * will take effect on next enc28j60_hw_init().
791 */
792 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
793 priv->full_duplex = (duplex == DUPLEX_FULL);
794 else {
795 if (netif_msg_link(priv))
796 dev_warn(&ndev->dev,
797 "unsupported link setting\n");
798 ret = -EOPNOTSUPP;
799 }
800 } else {
801 if (netif_msg_link(priv))
802 dev_warn(&ndev->dev, "Warning: hw must be disabled "
803 "to set link mode\n");
804 ret = -EBUSY;
805 }
806 return ret;
807}
808
809/*
810 * Read the Transmit Status Vector
811 */
812static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
813{
814 int endptr;
815
816 endptr = locked_regw_read(priv, ETXNDL);
817 if (netif_msg_hw(priv))
818 printk(KERN_DEBUG DRV_NAME ": reading TSV at addr:0x%04x\n",
819 endptr + 1);
820 enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv);
821}
822
823static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
824 u8 tsv[TSV_SIZE])
825{
826 u16 tmp1, tmp2;
827
828 printk(KERN_DEBUG DRV_NAME ": %s - TSV:\n", msg);
829 tmp1 = tsv[1];
830 tmp1 <<= 8;
831 tmp1 |= tsv[0];
832
833 tmp2 = tsv[5];
834 tmp2 <<= 8;
835 tmp2 |= tsv[4];
836
837 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, CollisionCount: %d,"
838 " TotByteOnWire: %d\n", tmp1, tsv[2] & 0x0f, tmp2);
839 printk(KERN_DEBUG DRV_NAME ": TxDone: %d, CRCErr:%d, LenChkErr: %d,"
840 " LenOutOfRange: %d\n", TSV_GETBIT(tsv, TSV_TXDONE),
841 TSV_GETBIT(tsv, TSV_TXCRCERROR),
842 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
843 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
844 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
845 "PacketDefer: %d, ExDefer: %d\n",
846 TSV_GETBIT(tsv, TSV_TXMULTICAST),
847 TSV_GETBIT(tsv, TSV_TXBROADCAST),
848 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
849 TSV_GETBIT(tsv, TSV_TXEXDEFER));
850 printk(KERN_DEBUG DRV_NAME ": ExCollision: %d, LateCollision: %d, "
851 "Giant: %d, Underrun: %d\n",
852 TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
853 TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
854 TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
855 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d, "
856 "BackPressApp: %d, VLanTagFrame: %d\n",
857 TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
858 TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
859 TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
860 TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
861}
862
863/*
864 * Receive Status vector
865 */
866static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
867 u16 pk_ptr, int len, u16 sts)
868{
869 printk(KERN_DEBUG DRV_NAME ": %s - NextPk: 0x%04x - RSV:\n",
870 msg, pk_ptr);
871 printk(KERN_DEBUG DRV_NAME ": ByteCount: %d, DribbleNibble: %d\n", len,
872 RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
873 printk(KERN_DEBUG DRV_NAME ": RxOK: %d, CRCErr:%d, LenChkErr: %d,"
874 " LenOutOfRange: %d\n", RSV_GETBIT(sts, RSV_RXOK),
875 RSV_GETBIT(sts, RSV_CRCERROR),
876 RSV_GETBIT(sts, RSV_LENCHECKERR),
877 RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
878 printk(KERN_DEBUG DRV_NAME ": Multicast: %d, Broadcast: %d, "
879 "LongDropEvent: %d, CarrierEvent: %d\n",
880 RSV_GETBIT(sts, RSV_RXMULTICAST),
881 RSV_GETBIT(sts, RSV_RXBROADCAST),
882 RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
883 RSV_GETBIT(sts, RSV_CARRIEREV));
884 printk(KERN_DEBUG DRV_NAME ": ControlFrame: %d, PauseFrame: %d,"
885 " UnknownOp: %d, VLanTagFrame: %d\n",
886 RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
887 RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
888 RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
889 RSV_GETBIT(sts, RSV_RXTYPEVLAN));
890}
891
892static void dump_packet(const char *msg, int len, const char *data)
893{
894 printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
895 print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
896 data, len, true);
897}
898
899/*
900 * Hardware receive function.
901 * Read the buffer memory, update the FIFO pointer to free the buffer,
902 * check the status vector and decrement the packet counter.
903 */
904static void enc28j60_hw_rx(struct net_device *ndev)
905{
906 struct enc28j60_net *priv = netdev_priv(ndev);
907 struct sk_buff *skb = NULL;
908 u16 erxrdpt, next_packet, rxstat;
909 u8 rsv[RSV_SIZE];
910 int len;
911
912 if (netif_msg_rx_status(priv))
913 printk(KERN_DEBUG DRV_NAME ": RX pk_addr:0x%04x\n",
914 priv->next_pk_ptr);
915
916 if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
917 if (netif_msg_rx_err(priv))
918 dev_err(&ndev->dev,
919 "%s() Invalid packet address!! 0x%04x\n",
920 __func__, priv->next_pk_ptr);
921 /* packet address corrupted: reset RX logic */
922 mutex_lock(&priv->lock);
923 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
924 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
925 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
926 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
927 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
928 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
929 mutex_unlock(&priv->lock);
930 ndev->stats.rx_errors++;
931 return;
932 }
933 /* Read next packet pointer and rx status vector */
934 enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
935
936 next_packet = rsv[1];
937 next_packet <<= 8;
938 next_packet |= rsv[0];
939
940 len = rsv[3];
941 len <<= 8;
942 len |= rsv[2];
943
944 rxstat = rsv[5];
945 rxstat <<= 8;
946 rxstat |= rsv[4];
947
948 if (netif_msg_rx_status(priv))
949 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
950
951 if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
952 if (netif_msg_rx_err(priv))
953 dev_err(&ndev->dev, "Rx Error (%04x)\n", rxstat);
954 ndev->stats.rx_errors++;
955 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
956 ndev->stats.rx_crc_errors++;
957 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
958 ndev->stats.rx_frame_errors++;
959 if (len > MAX_FRAMELEN)
960 ndev->stats.rx_over_errors++;
961 } else {
962 skb = netdev_alloc_skb(ndev, len + NET_IP_ALIGN);
963 if (!skb) {
964 if (netif_msg_rx_err(priv))
965 dev_err(&ndev->dev,
966 "out of memory for Rx'd frame\n");
967 ndev->stats.rx_dropped++;
968 } else {
969 skb_reserve(skb, NET_IP_ALIGN);
970 /* copy the packet from the receive buffer */
971 enc28j60_mem_read(priv,
972 rx_packet_start(priv->next_pk_ptr),
973 len, skb_put(skb, len));
974 if (netif_msg_pktdata(priv))
975 dump_packet(__func__, skb->len, skb->data);
976 skb->protocol = eth_type_trans(skb, ndev);
977 /* update statistics */
978 ndev->stats.rx_packets++;
979 ndev->stats.rx_bytes += len;
980 netif_rx_ni(skb);
981 }
982 }
983 /*
984 * Move the RX read pointer to the start of the next
985 * received packet.
986 * This frees the memory we just read out
987 */
988 erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
989 if (netif_msg_hw(priv))
990 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT:0x%04x\n",
991 __func__, erxrdpt);
992
993 mutex_lock(&priv->lock);
994 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
995#ifdef CONFIG_ENC28J60_WRITEVERIFY
996 if (netif_msg_drv(priv)) {
997 u16 reg;
998 reg = nolock_regw_read(priv, ERXRDPTL);
999 if (reg != erxrdpt)
1000 printk(KERN_DEBUG DRV_NAME ": %s() ERXRDPT verify "
1001 "error (0x%04x - 0x%04x)\n", __func__,
1002 reg, erxrdpt);
1003 }
1004#endif
1005 priv->next_pk_ptr = next_packet;
1006 /* we are done with this packet, decrement the packet counter */
1007 nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
1008 mutex_unlock(&priv->lock);
1009}
1010
1011/*
1012 * Calculate free space in RxFIFO
1013 */
1014static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
1015{
1016 int epkcnt, erxst, erxnd, erxwr, erxrd;
1017 int free_space;
1018
1019 mutex_lock(&priv->lock);
1020 epkcnt = nolock_regb_read(priv, EPKTCNT);
1021 if (epkcnt >= 255)
1022 free_space = -1;
1023 else {
1024 erxst = nolock_regw_read(priv, ERXSTL);
1025 erxnd = nolock_regw_read(priv, ERXNDL);
1026 erxwr = nolock_regw_read(priv, ERXWRPTL);
1027 erxrd = nolock_regw_read(priv, ERXRDPTL);
1028
1029 if (erxwr > erxrd)
1030 free_space = (erxnd - erxst) - (erxwr - erxrd);
1031 else if (erxwr == erxrd)
1032 free_space = (erxnd - erxst);
1033 else
1034 free_space = erxrd - erxwr - 1;
1035 }
1036 mutex_unlock(&priv->lock);
1037 if (netif_msg_rx_status(priv))
1038 printk(KERN_DEBUG DRV_NAME ": %s() free_space = %d\n",
1039 __func__, free_space);
1040 return free_space;
1041}
1042
1043/*
1044 * Access the PHY to determine link status
1045 */
1046static void enc28j60_check_link_status(struct net_device *ndev)
1047{
1048 struct enc28j60_net *priv = netdev_priv(ndev);
1049 u16 reg;
1050 int duplex;
1051
1052 reg = enc28j60_phy_read(priv, PHSTAT2);
1053 if (netif_msg_hw(priv))
1054 printk(KERN_DEBUG DRV_NAME ": %s() PHSTAT1: %04x, "
1055 "PHSTAT2: %04x\n", __func__,
1056 enc28j60_phy_read(priv, PHSTAT1), reg);
1057 duplex = reg & PHSTAT2_DPXSTAT;
1058
1059 if (reg & PHSTAT2_LSTAT) {
1060 netif_carrier_on(ndev);
1061 if (netif_msg_ifup(priv))
1062 dev_info(&ndev->dev, "link up - %s\n",
1063 duplex ? "Full duplex" : "Half duplex");
1064 } else {
1065 if (netif_msg_ifdown(priv))
1066 dev_info(&ndev->dev, "link down\n");
1067 netif_carrier_off(ndev);
1068 }
1069}
1070
1071static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1072{
1073 struct enc28j60_net *priv = netdev_priv(ndev);
1074
1075 if (err)
1076 ndev->stats.tx_errors++;
1077 else
1078 ndev->stats.tx_packets++;
1079
1080 if (priv->tx_skb) {
1081 if (!err)
1082 ndev->stats.tx_bytes += priv->tx_skb->len;
1083 dev_kfree_skb(priv->tx_skb);
1084 priv->tx_skb = NULL;
1085 }
1086 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1087 netif_wake_queue(ndev);
1088}
1089
1090/*
1091 * RX handler
1092 * ignore PKTIF because is unreliable! (look at the errata datasheet)
1093 * check EPKTCNT is the suggested workaround.
1094 * We don't need to clear interrupt flag, automatically done when
1095 * enc28j60_hw_rx() decrements the packet counter.
1096 * Returns how many packet processed.
1097 */
1098static int enc28j60_rx_interrupt(struct net_device *ndev)
1099{
1100 struct enc28j60_net *priv = netdev_priv(ndev);
1101 int pk_counter, ret;
1102
1103 pk_counter = locked_regb_read(priv, EPKTCNT);
1104 if (pk_counter && netif_msg_intr(priv))
1105 printk(KERN_DEBUG DRV_NAME ": intRX, pk_cnt: %d\n", pk_counter);
1106 if (pk_counter > priv->max_pk_counter) {
1107 /* update statistics */
1108 priv->max_pk_counter = pk_counter;
1109 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1110 printk(KERN_DEBUG DRV_NAME ": RX max_pk_cnt: %d\n",
1111 priv->max_pk_counter);
1112 }
1113 ret = pk_counter;
1114 while (pk_counter-- > 0)
1115 enc28j60_hw_rx(ndev);
1116
1117 return ret;
1118}
1119
1120static void enc28j60_irq_work_handler(struct work_struct *work)
1121{
1122 struct enc28j60_net *priv =
1123 container_of(work, struct enc28j60_net, irq_work);
1124 struct net_device *ndev = priv->netdev;
1125 int intflags, loop;
1126
1127 if (netif_msg_intr(priv))
1128 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1129 /* disable further interrupts */
1130 locked_reg_bfclr(priv, EIE, EIE_INTIE);
1131
1132 do {
1133 loop = 0;
1134 intflags = locked_regb_read(priv, EIR);
1135 /* DMA interrupt handler (not currently used) */
1136 if ((intflags & EIR_DMAIF) != 0) {
1137 loop++;
1138 if (netif_msg_intr(priv))
1139 printk(KERN_DEBUG DRV_NAME
1140 ": intDMA(%d)\n", loop);
1141 locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1142 }
1143 /* LINK changed handler */
1144 if ((intflags & EIR_LINKIF) != 0) {
1145 loop++;
1146 if (netif_msg_intr(priv))
1147 printk(KERN_DEBUG DRV_NAME
1148 ": intLINK(%d)\n", loop);
1149 enc28j60_check_link_status(ndev);
1150 /* read PHIR to clear the flag */
1151 enc28j60_phy_read(priv, PHIR);
1152 }
1153 /* TX complete handler */
1154 if (((intflags & EIR_TXIF) != 0) &&
1155 ((intflags & EIR_TXERIF) == 0)) {
1156 bool err = false;
1157 loop++;
1158 if (netif_msg_intr(priv))
1159 printk(KERN_DEBUG DRV_NAME
1160 ": intTX(%d)\n", loop);
1161 priv->tx_retry_count = 0;
1162 if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1163 if (netif_msg_tx_err(priv))
1164 dev_err(&ndev->dev,
1165 "Tx Error (aborted)\n");
1166 err = true;
1167 }
1168 if (netif_msg_tx_done(priv)) {
1169 u8 tsv[TSV_SIZE];
1170 enc28j60_read_tsv(priv, tsv);
1171 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1172 }
1173 enc28j60_tx_clear(ndev, err);
1174 locked_reg_bfclr(priv, EIR, EIR_TXIF);
1175 }
1176 /* TX Error handler */
1177 if ((intflags & EIR_TXERIF) != 0) {
1178 u8 tsv[TSV_SIZE];
1179
1180 loop++;
1181 if (netif_msg_intr(priv))
1182 printk(KERN_DEBUG DRV_NAME
1183 ": intTXErr(%d)\n", loop);
1184 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1185 enc28j60_read_tsv(priv, tsv);
1186 if (netif_msg_tx_err(priv))
1187 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1188 /* Reset TX logic */
1189 mutex_lock(&priv->lock);
1190 nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1191 nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1192 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1193 mutex_unlock(&priv->lock);
1194 /* Transmit Late collision check for retransmit */
1195 if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1196 if (netif_msg_tx_err(priv))
1197 printk(KERN_DEBUG DRV_NAME
1198 ": LateCollision TXErr (%d)\n",
1199 priv->tx_retry_count);
1200 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1201 locked_reg_bfset(priv, ECON1,
1202 ECON1_TXRTS);
1203 else
1204 enc28j60_tx_clear(ndev, true);
1205 } else
1206 enc28j60_tx_clear(ndev, true);
1207 locked_reg_bfclr(priv, EIR, EIR_TXERIF | EIR_TXIF);
1208 }
1209 /* RX Error handler */
1210 if ((intflags & EIR_RXERIF) != 0) {
1211 loop++;
1212 if (netif_msg_intr(priv))
1213 printk(KERN_DEBUG DRV_NAME
1214 ": intRXErr(%d)\n", loop);
1215 /* Check free FIFO space to flag RX overrun */
1216 if (enc28j60_get_free_rxfifo(priv) <= 0) {
1217 if (netif_msg_rx_err(priv))
1218 printk(KERN_DEBUG DRV_NAME
1219 ": RX Overrun\n");
1220 ndev->stats.rx_dropped++;
1221 }
1222 locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1223 }
1224 /* RX handler */
1225 if (enc28j60_rx_interrupt(ndev))
1226 loop++;
1227 } while (loop);
1228
1229 /* re-enable interrupts */
1230 locked_reg_bfset(priv, EIE, EIE_INTIE);
1231 if (netif_msg_intr(priv))
1232 printk(KERN_DEBUG DRV_NAME ": %s() exit\n", __func__);
1233}
1234
1235/*
1236 * Hardware transmit function.
1237 * Fill the buffer memory and send the contents of the transmit buffer
1238 * onto the network
1239 */
1240static void enc28j60_hw_tx(struct enc28j60_net *priv)
1241{
1242 BUG_ON(!priv->tx_skb);
1243
1244 if (netif_msg_tx_queued(priv))
1245 printk(KERN_DEBUG DRV_NAME
1246 ": Tx Packet Len:%d\n", priv->tx_skb->len);
1247
1248 if (netif_msg_pktdata(priv))
1249 dump_packet(__func__,
1250 priv->tx_skb->len, priv->tx_skb->data);
1251 enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1252
1253#ifdef CONFIG_ENC28J60_WRITEVERIFY
1254 /* readback and verify written data */
1255 if (netif_msg_drv(priv)) {
1256 int test_len, k;
1257 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1258 int okflag;
1259
1260 test_len = priv->tx_skb->len;
1261 if (test_len > sizeof(test_buf))
1262 test_len = sizeof(test_buf);
1263
1264 /* + 1 to skip control byte */
1265 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1266 okflag = 1;
1267 for (k = 0; k < test_len; k++) {
1268 if (priv->tx_skb->data[k] != test_buf[k]) {
1269 printk(KERN_DEBUG DRV_NAME
1270 ": Error, %d location differ: "
1271 "0x%02x-0x%02x\n", k,
1272 priv->tx_skb->data[k], test_buf[k]);
1273 okflag = 0;
1274 }
1275 }
1276 if (!okflag)
1277 printk(KERN_DEBUG DRV_NAME ": Tx write buffer, "
1278 "verify ERROR!\n");
1279 }
1280#endif
1281 /* set TX request flag */
1282 locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1283}
1284
1285static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
1286 struct net_device *dev)
1287{
1288 struct enc28j60_net *priv = netdev_priv(dev);
1289
1290 if (netif_msg_tx_queued(priv))
1291 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1292
1293 /* If some error occurs while trying to transmit this
1294 * packet, you should return '1' from this function.
1295 * In such a case you _may not_ do anything to the
1296 * SKB, it is still owned by the network queueing
1297 * layer when an error is returned. This means you
1298 * may not modify any SKB fields, you may not free
1299 * the SKB, etc.
1300 */
1301 netif_stop_queue(dev);
1302
1303 /* Remember the skb for deferred processing */
1304 priv->tx_skb = skb;
1305 schedule_work(&priv->tx_work);
1306
1307 return NETDEV_TX_OK;
1308}
1309
1310static void enc28j60_tx_work_handler(struct work_struct *work)
1311{
1312 struct enc28j60_net *priv =
1313 container_of(work, struct enc28j60_net, tx_work);
1314
1315 /* actual delivery of data */
1316 enc28j60_hw_tx(priv);
1317}
1318
1319static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1320{
1321 struct enc28j60_net *priv = dev_id;
1322
1323 /*
1324 * Can't do anything in interrupt context because we need to
1325 * block (spi_sync() is blocking) so fire of the interrupt
1326 * handling workqueue.
1327 * Remember that we access enc28j60 registers through SPI bus
1328 * via spi_sync() call.
1329 */
1330 schedule_work(&priv->irq_work);
1331
1332 return IRQ_HANDLED;
1333}
1334
1335static void enc28j60_tx_timeout(struct net_device *ndev)
1336{
1337 struct enc28j60_net *priv = netdev_priv(ndev);
1338
1339 if (netif_msg_timer(priv))
1340 dev_err(&ndev->dev, DRV_NAME " tx timeout\n");
1341
1342 ndev->stats.tx_errors++;
1343 /* can't restart safely under softirq */
1344 schedule_work(&priv->restart_work);
1345}
1346
1347/*
1348 * Open/initialize the board. This is called (in the current kernel)
1349 * sometime after booting when the 'ifconfig' program is run.
1350 *
1351 * This routine should set everything up anew at each open, even
1352 * registers that "should" only need to be set once at boot, so that
1353 * there is non-reboot way to recover if something goes wrong.
1354 */
1355static int enc28j60_net_open(struct net_device *dev)
1356{
1357 struct enc28j60_net *priv = netdev_priv(dev);
1358
1359 if (netif_msg_drv(priv))
1360 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1361
1362 if (!is_valid_ether_addr(dev->dev_addr)) {
1363 if (netif_msg_ifup(priv))
1364 dev_err(&dev->dev, "invalid MAC address %pM\n",
1365 dev->dev_addr);
1366 return -EADDRNOTAVAIL;
1367 }
1368 /* Reset the hardware here (and take it out of low power mode) */
1369 enc28j60_lowpower(priv, false);
1370 enc28j60_hw_disable(priv);
1371 if (!enc28j60_hw_init(priv)) {
1372 if (netif_msg_ifup(priv))
1373 dev_err(&dev->dev, "hw_reset() failed\n");
1374 return -EINVAL;
1375 }
1376 /* Update the MAC address (in case user has changed it) */
1377 enc28j60_set_hw_macaddr(dev);
1378 /* Enable interrupts */
1379 enc28j60_hw_enable(priv);
1380 /* check link status */
1381 enc28j60_check_link_status(dev);
1382 /* We are now ready to accept transmit requests from
1383 * the queueing layer of the networking.
1384 */
1385 netif_start_queue(dev);
1386
1387 return 0;
1388}
1389
1390/* The inverse routine to net_open(). */
1391static int enc28j60_net_close(struct net_device *dev)
1392{
1393 struct enc28j60_net *priv = netdev_priv(dev);
1394
1395 if (netif_msg_drv(priv))
1396 printk(KERN_DEBUG DRV_NAME ": %s() enter\n", __func__);
1397
1398 enc28j60_hw_disable(priv);
1399 enc28j60_lowpower(priv, true);
1400 netif_stop_queue(dev);
1401
1402 return 0;
1403}
1404
1405/*
1406 * Set or clear the multicast filter for this adapter
1407 * num_addrs == -1 Promiscuous mode, receive all packets
1408 * num_addrs == 0 Normal mode, filter out multicast packets
1409 * num_addrs > 0 Multicast mode, receive normal and MC packets
1410 */
1411static void enc28j60_set_multicast_list(struct net_device *dev)
1412{
1413 struct enc28j60_net *priv = netdev_priv(dev);
1414 int oldfilter = priv->rxfilter;
1415
1416 if (dev->flags & IFF_PROMISC) {
1417 if (netif_msg_link(priv))
1418 dev_info(&dev->dev, "promiscuous mode\n");
1419 priv->rxfilter = RXFILTER_PROMISC;
1420 } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
1421 if (netif_msg_link(priv))
1422 dev_info(&dev->dev, "%smulticast mode\n",
1423 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1424 priv->rxfilter = RXFILTER_MULTI;
1425 } else {
1426 if (netif_msg_link(priv))
1427 dev_info(&dev->dev, "normal mode\n");
1428 priv->rxfilter = RXFILTER_NORMAL;
1429 }
1430
1431 if (oldfilter != priv->rxfilter)
1432 schedule_work(&priv->setrx_work);
1433}
1434
1435static void enc28j60_setrx_work_handler(struct work_struct *work)
1436{
1437 struct enc28j60_net *priv =
1438 container_of(work, struct enc28j60_net, setrx_work);
1439
1440 if (priv->rxfilter == RXFILTER_PROMISC) {
1441 if (netif_msg_drv(priv))
1442 printk(KERN_DEBUG DRV_NAME ": promiscuous mode\n");
1443 locked_regb_write(priv, ERXFCON, 0x00);
1444 } else if (priv->rxfilter == RXFILTER_MULTI) {
1445 if (netif_msg_drv(priv))
1446 printk(KERN_DEBUG DRV_NAME ": multicast mode\n");
1447 locked_regb_write(priv, ERXFCON,
1448 ERXFCON_UCEN | ERXFCON_CRCEN |
1449 ERXFCON_BCEN | ERXFCON_MCEN);
1450 } else {
1451 if (netif_msg_drv(priv))
1452 printk(KERN_DEBUG DRV_NAME ": normal mode\n");
1453 locked_regb_write(priv, ERXFCON,
1454 ERXFCON_UCEN | ERXFCON_CRCEN |
1455 ERXFCON_BCEN);
1456 }
1457}
1458
1459static void enc28j60_restart_work_handler(struct work_struct *work)
1460{
1461 struct enc28j60_net *priv =
1462 container_of(work, struct enc28j60_net, restart_work);
1463 struct net_device *ndev = priv->netdev;
1464 int ret;
1465
1466 rtnl_lock();
1467 if (netif_running(ndev)) {
1468 enc28j60_net_close(ndev);
1469 ret = enc28j60_net_open(ndev);
1470 if (unlikely(ret)) {
1471 dev_info(&ndev->dev, " could not restart %d\n", ret);
1472 dev_close(ndev);
1473 }
1474 }
1475 rtnl_unlock();
1476}
1477
1478/* ......................... ETHTOOL SUPPORT ........................... */
1479
1480static void
1481enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1482{
1483 strlcpy(info->driver, DRV_NAME, sizeof(info->driver));
1484 strlcpy(info->version, DRV_VERSION, sizeof(info->version));
1485 strlcpy(info->bus_info,
1486 dev_name(dev->dev.parent), sizeof(info->bus_info));
1487}
1488
1489static int
1490enc28j60_get_link_ksettings(struct net_device *dev,
1491 struct ethtool_link_ksettings *cmd)
1492{
1493 struct enc28j60_net *priv = netdev_priv(dev);
1494
1495 ethtool_link_ksettings_zero_link_mode(cmd, supported);
1496 ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half);
1497 ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Full);
1498 ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
1499
1500 cmd->base.speed = SPEED_10;
1501 cmd->base.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1502 cmd->base.port = PORT_TP;
1503 cmd->base.autoneg = AUTONEG_DISABLE;
1504
1505 return 0;
1506}
1507
1508static int
1509enc28j60_set_link_ksettings(struct net_device *dev,
1510 const struct ethtool_link_ksettings *cmd)
1511{
1512 return enc28j60_setlink(dev, cmd->base.autoneg,
1513 cmd->base.speed, cmd->base.duplex);
1514}
1515
1516static u32 enc28j60_get_msglevel(struct net_device *dev)
1517{
1518 struct enc28j60_net *priv = netdev_priv(dev);
1519 return priv->msg_enable;
1520}
1521
1522static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1523{
1524 struct enc28j60_net *priv = netdev_priv(dev);
1525 priv->msg_enable = val;
1526}
1527
1528static const struct ethtool_ops enc28j60_ethtool_ops = {
1529 .get_drvinfo = enc28j60_get_drvinfo,
1530 .get_msglevel = enc28j60_get_msglevel,
1531 .set_msglevel = enc28j60_set_msglevel,
1532 .get_link_ksettings = enc28j60_get_link_ksettings,
1533 .set_link_ksettings = enc28j60_set_link_ksettings,
1534};
1535
1536static int enc28j60_chipset_init(struct net_device *dev)
1537{
1538 struct enc28j60_net *priv = netdev_priv(dev);
1539
1540 return enc28j60_hw_init(priv);
1541}
1542
1543static const struct net_device_ops enc28j60_netdev_ops = {
1544 .ndo_open = enc28j60_net_open,
1545 .ndo_stop = enc28j60_net_close,
1546 .ndo_start_xmit = enc28j60_send_packet,
1547 .ndo_set_rx_mode = enc28j60_set_multicast_list,
1548 .ndo_set_mac_address = enc28j60_set_mac_address,
1549 .ndo_tx_timeout = enc28j60_tx_timeout,
1550 .ndo_validate_addr = eth_validate_addr,
1551};
1552
1553static int enc28j60_probe(struct spi_device *spi)
1554{
1555 struct net_device *dev;
1556 struct enc28j60_net *priv;
1557 const void *macaddr;
1558 int ret = 0;
1559
1560 if (netif_msg_drv(&debug))
1561 dev_info(&spi->dev, DRV_NAME " Ethernet driver %s loaded\n",
1562 DRV_VERSION);
1563
1564 dev = alloc_etherdev(sizeof(struct enc28j60_net));
1565 if (!dev) {
1566 ret = -ENOMEM;
1567 goto error_alloc;
1568 }
1569 priv = netdev_priv(dev);
1570
1571 priv->netdev = dev; /* priv to netdev reference */
1572 priv->spi = spi; /* priv to spi reference */
1573 priv->msg_enable = netif_msg_init(debug.msg_enable,
1574 ENC28J60_MSG_DEFAULT);
1575 mutex_init(&priv->lock);
1576 INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1577 INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1578 INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1579 INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1580 spi_set_drvdata(spi, priv); /* spi to priv reference */
1581 SET_NETDEV_DEV(dev, &spi->dev);
1582
1583 if (!enc28j60_chipset_init(dev)) {
1584 if (netif_msg_probe(priv))
1585 dev_info(&spi->dev, DRV_NAME " chip not found\n");
1586 ret = -EIO;
1587 goto error_irq;
1588 }
1589
1590 macaddr = of_get_mac_address(spi->dev.of_node);
1591 if (macaddr)
1592 ether_addr_copy(dev->dev_addr, macaddr);
1593 else
1594 eth_hw_addr_random(dev);
1595 enc28j60_set_hw_macaddr(dev);
1596
1597 /* Board setup must set the relevant edge trigger type;
1598 * level triggers won't currently work.
1599 */
1600 ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1601 if (ret < 0) {
1602 if (netif_msg_probe(priv))
1603 dev_err(&spi->dev, DRV_NAME ": request irq %d failed "
1604 "(ret = %d)\n", spi->irq, ret);
1605 goto error_irq;
1606 }
1607
1608 dev->if_port = IF_PORT_10BASET;
1609 dev->irq = spi->irq;
1610 dev->netdev_ops = &enc28j60_netdev_ops;
1611 dev->watchdog_timeo = TX_TIMEOUT;
1612 dev->ethtool_ops = &enc28j60_ethtool_ops;
1613
1614 enc28j60_lowpower(priv, true);
1615
1616 ret = register_netdev(dev);
1617 if (ret) {
1618 if (netif_msg_probe(priv))
1619 dev_err(&spi->dev, "register netdev " DRV_NAME
1620 " failed (ret = %d)\n", ret);
1621 goto error_register;
1622 }
1623 dev_info(&dev->dev, DRV_NAME " driver registered\n");
1624
1625 return 0;
1626
1627error_register:
1628 free_irq(spi->irq, priv);
1629error_irq:
1630 free_netdev(dev);
1631error_alloc:
1632 return ret;
1633}
1634
1635static int enc28j60_remove(struct spi_device *spi)
1636{
1637 struct enc28j60_net *priv = spi_get_drvdata(spi);
1638
1639 if (netif_msg_drv(priv))
1640 printk(KERN_DEBUG DRV_NAME ": remove\n");
1641
1642 unregister_netdev(priv->netdev);
1643 free_irq(spi->irq, priv);
1644 free_netdev(priv->netdev);
1645
1646 return 0;
1647}
1648
1649static const struct of_device_id enc28j60_dt_ids[] = {
1650 { .compatible = "microchip,enc28j60" },
1651 { /* sentinel */ }
1652};
1653MODULE_DEVICE_TABLE(of, enc28j60_dt_ids);
1654
1655static struct spi_driver enc28j60_driver = {
1656 .driver = {
1657 .name = DRV_NAME,
1658 .of_match_table = enc28j60_dt_ids,
1659 },
1660 .probe = enc28j60_probe,
1661 .remove = enc28j60_remove,
1662};
1663
1664static int __init enc28j60_init(void)
1665{
1666 msec20_to_jiffies = msecs_to_jiffies(20);
1667
1668 return spi_register_driver(&enc28j60_driver);
1669}
1670
1671module_init(enc28j60_init);
1672
1673static void __exit enc28j60_exit(void)
1674{
1675 spi_unregister_driver(&enc28j60_driver);
1676}
1677
1678module_exit(enc28j60_exit);
1679
1680MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1681MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1682MODULE_LICENSE("GPL");
1683module_param_named(debug, debug.msg_enable, int, 0);
1684MODULE_PARM_DESC(debug, "Debug verbosity level (0=none, ..., ffff=all)");
1685MODULE_ALIAS("spi:" DRV_NAME);
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * Microchip ENC28J60 ethernet driver (MAC + PHY)
4 *
5 * Copyright (C) 2007 Eurek srl
6 * Author: Claudio Lanconelli <lanconelli.claudio@eptar.com>
7 * based on enc28j60.c written by David Anders for 2.4 kernel version
8 *
9 * $Id: enc28j60.c,v 1.22 2007/12/20 10:47:01 claudio Exp $
10 */
11
12#include <linux/module.h>
13#include <linux/kernel.h>
14#include <linux/types.h>
15#include <linux/fcntl.h>
16#include <linux/interrupt.h>
17#include <linux/property.h>
18#include <linux/string.h>
19#include <linux/errno.h>
20#include <linux/netdevice.h>
21#include <linux/etherdevice.h>
22#include <linux/ethtool.h>
23#include <linux/tcp.h>
24#include <linux/skbuff.h>
25#include <linux/delay.h>
26#include <linux/spi/spi.h>
27
28#include "enc28j60_hw.h"
29
30#define DRV_NAME "enc28j60"
31#define DRV_VERSION "1.02"
32
33#define SPI_OPLEN 1
34
35#define ENC28J60_MSG_DEFAULT \
36 (NETIF_MSG_PROBE | NETIF_MSG_IFUP | NETIF_MSG_IFDOWN | NETIF_MSG_LINK)
37
38/* Buffer size required for the largest SPI transfer (i.e., reading a
39 * frame).
40 */
41#define SPI_TRANSFER_BUF_LEN (4 + MAX_FRAMELEN)
42
43#define TX_TIMEOUT (4 * HZ)
44
45/* Max TX retries in case of collision as suggested by errata datasheet */
46#define MAX_TX_RETRYCOUNT 16
47
48enum {
49 RXFILTER_NORMAL,
50 RXFILTER_MULTI,
51 RXFILTER_PROMISC
52};
53
54/* Driver local data */
55struct enc28j60_net {
56 struct net_device *netdev;
57 struct spi_device *spi;
58 struct mutex lock;
59 struct sk_buff *tx_skb;
60 struct work_struct tx_work;
61 struct work_struct irq_work;
62 struct work_struct setrx_work;
63 struct work_struct restart_work;
64 u8 bank; /* current register bank selected */
65 u16 next_pk_ptr; /* next packet pointer within FIFO */
66 u16 max_pk_counter; /* statistics: max packet counter */
67 u16 tx_retry_count;
68 bool hw_enable;
69 bool full_duplex;
70 int rxfilter;
71 u32 msg_enable;
72 u8 spi_transfer_buf[SPI_TRANSFER_BUF_LEN];
73};
74
75/* use ethtool to change the level for any given device */
76static struct {
77 u32 msg_enable;
78} debug = { -1 };
79
80/*
81 * SPI read buffer
82 * Wait for the SPI transfer and copy received data to destination.
83 */
84static int
85spi_read_buf(struct enc28j60_net *priv, int len, u8 *data)
86{
87 struct device *dev = &priv->spi->dev;
88 u8 *rx_buf = priv->spi_transfer_buf + 4;
89 u8 *tx_buf = priv->spi_transfer_buf;
90 struct spi_transfer tx = {
91 .tx_buf = tx_buf,
92 .len = SPI_OPLEN,
93 };
94 struct spi_transfer rx = {
95 .rx_buf = rx_buf,
96 .len = len,
97 };
98 struct spi_message msg;
99 int ret;
100
101 tx_buf[0] = ENC28J60_READ_BUF_MEM;
102
103 spi_message_init(&msg);
104 spi_message_add_tail(&tx, &msg);
105 spi_message_add_tail(&rx, &msg);
106
107 ret = spi_sync(priv->spi, &msg);
108 if (ret == 0) {
109 memcpy(data, rx_buf, len);
110 ret = msg.status;
111 }
112 if (ret && netif_msg_drv(priv))
113 dev_printk(KERN_DEBUG, dev, "%s() failed: ret = %d\n",
114 __func__, ret);
115
116 return ret;
117}
118
119/*
120 * SPI write buffer
121 */
122static int spi_write_buf(struct enc28j60_net *priv, int len, const u8 *data)
123{
124 struct device *dev = &priv->spi->dev;
125 int ret;
126
127 if (len > SPI_TRANSFER_BUF_LEN - 1 || len <= 0)
128 ret = -EINVAL;
129 else {
130 priv->spi_transfer_buf[0] = ENC28J60_WRITE_BUF_MEM;
131 memcpy(&priv->spi_transfer_buf[1], data, len);
132 ret = spi_write(priv->spi, priv->spi_transfer_buf, len + 1);
133 if (ret && netif_msg_drv(priv))
134 dev_printk(KERN_DEBUG, dev, "%s() failed: ret = %d\n",
135 __func__, ret);
136 }
137 return ret;
138}
139
140/*
141 * basic SPI read operation
142 */
143static u8 spi_read_op(struct enc28j60_net *priv, u8 op, u8 addr)
144{
145 struct device *dev = &priv->spi->dev;
146 u8 tx_buf[2];
147 u8 rx_buf[4];
148 u8 val = 0;
149 int ret;
150 int slen = SPI_OPLEN;
151
152 /* do dummy read if needed */
153 if (addr & SPRD_MASK)
154 slen++;
155
156 tx_buf[0] = op | (addr & ADDR_MASK);
157 ret = spi_write_then_read(priv->spi, tx_buf, 1, rx_buf, slen);
158 if (ret)
159 dev_printk(KERN_DEBUG, dev, "%s() failed: ret = %d\n",
160 __func__, ret);
161 else
162 val = rx_buf[slen - 1];
163
164 return val;
165}
166
167/*
168 * basic SPI write operation
169 */
170static int spi_write_op(struct enc28j60_net *priv, u8 op, u8 addr, u8 val)
171{
172 struct device *dev = &priv->spi->dev;
173 int ret;
174
175 priv->spi_transfer_buf[0] = op | (addr & ADDR_MASK);
176 priv->spi_transfer_buf[1] = val;
177 ret = spi_write(priv->spi, priv->spi_transfer_buf, 2);
178 if (ret && netif_msg_drv(priv))
179 dev_printk(KERN_DEBUG, dev, "%s() failed: ret = %d\n",
180 __func__, ret);
181 return ret;
182}
183
184static void enc28j60_soft_reset(struct enc28j60_net *priv)
185{
186 spi_write_op(priv, ENC28J60_SOFT_RESET, 0, ENC28J60_SOFT_RESET);
187 /* Errata workaround #1, CLKRDY check is unreliable,
188 * delay at least 1 ms instead */
189 udelay(2000);
190}
191
192/*
193 * select the current register bank if necessary
194 */
195static void enc28j60_set_bank(struct enc28j60_net *priv, u8 addr)
196{
197 u8 b = (addr & BANK_MASK) >> 5;
198
199 /* These registers (EIE, EIR, ESTAT, ECON2, ECON1)
200 * are present in all banks, no need to switch bank.
201 */
202 if (addr >= EIE && addr <= ECON1)
203 return;
204
205 /* Clear or set each bank selection bit as needed */
206 if ((b & ECON1_BSEL0) != (priv->bank & ECON1_BSEL0)) {
207 if (b & ECON1_BSEL0)
208 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
209 ECON1_BSEL0);
210 else
211 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
212 ECON1_BSEL0);
213 }
214 if ((b & ECON1_BSEL1) != (priv->bank & ECON1_BSEL1)) {
215 if (b & ECON1_BSEL1)
216 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, ECON1,
217 ECON1_BSEL1);
218 else
219 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, ECON1,
220 ECON1_BSEL1);
221 }
222 priv->bank = b;
223}
224
225/*
226 * Register access routines through the SPI bus.
227 * Every register access comes in two flavours:
228 * - nolock_xxx: caller needs to invoke mutex_lock, usually to access
229 * atomically more than one register
230 * - locked_xxx: caller doesn't need to invoke mutex_lock, single access
231 *
232 * Some registers can be accessed through the bit field clear and
233 * bit field set to avoid a read modify write cycle.
234 */
235
236/*
237 * Register bit field Set
238 */
239static void nolock_reg_bfset(struct enc28j60_net *priv, u8 addr, u8 mask)
240{
241 enc28j60_set_bank(priv, addr);
242 spi_write_op(priv, ENC28J60_BIT_FIELD_SET, addr, mask);
243}
244
245static void locked_reg_bfset(struct enc28j60_net *priv, u8 addr, u8 mask)
246{
247 mutex_lock(&priv->lock);
248 nolock_reg_bfset(priv, addr, mask);
249 mutex_unlock(&priv->lock);
250}
251
252/*
253 * Register bit field Clear
254 */
255static void nolock_reg_bfclr(struct enc28j60_net *priv, u8 addr, u8 mask)
256{
257 enc28j60_set_bank(priv, addr);
258 spi_write_op(priv, ENC28J60_BIT_FIELD_CLR, addr, mask);
259}
260
261static void locked_reg_bfclr(struct enc28j60_net *priv, u8 addr, u8 mask)
262{
263 mutex_lock(&priv->lock);
264 nolock_reg_bfclr(priv, addr, mask);
265 mutex_unlock(&priv->lock);
266}
267
268/*
269 * Register byte read
270 */
271static int nolock_regb_read(struct enc28j60_net *priv, u8 address)
272{
273 enc28j60_set_bank(priv, address);
274 return spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
275}
276
277static int locked_regb_read(struct enc28j60_net *priv, u8 address)
278{
279 int ret;
280
281 mutex_lock(&priv->lock);
282 ret = nolock_regb_read(priv, address);
283 mutex_unlock(&priv->lock);
284
285 return ret;
286}
287
288/*
289 * Register word read
290 */
291static int nolock_regw_read(struct enc28j60_net *priv, u8 address)
292{
293 int rl, rh;
294
295 enc28j60_set_bank(priv, address);
296 rl = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address);
297 rh = spi_read_op(priv, ENC28J60_READ_CTRL_REG, address + 1);
298
299 return (rh << 8) | rl;
300}
301
302static int locked_regw_read(struct enc28j60_net *priv, u8 address)
303{
304 int ret;
305
306 mutex_lock(&priv->lock);
307 ret = nolock_regw_read(priv, address);
308 mutex_unlock(&priv->lock);
309
310 return ret;
311}
312
313/*
314 * Register byte write
315 */
316static void nolock_regb_write(struct enc28j60_net *priv, u8 address, u8 data)
317{
318 enc28j60_set_bank(priv, address);
319 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, data);
320}
321
322static void locked_regb_write(struct enc28j60_net *priv, u8 address, u8 data)
323{
324 mutex_lock(&priv->lock);
325 nolock_regb_write(priv, address, data);
326 mutex_unlock(&priv->lock);
327}
328
329/*
330 * Register word write
331 */
332static void nolock_regw_write(struct enc28j60_net *priv, u8 address, u16 data)
333{
334 enc28j60_set_bank(priv, address);
335 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address, (u8) data);
336 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, address + 1,
337 (u8) (data >> 8));
338}
339
340static void locked_regw_write(struct enc28j60_net *priv, u8 address, u16 data)
341{
342 mutex_lock(&priv->lock);
343 nolock_regw_write(priv, address, data);
344 mutex_unlock(&priv->lock);
345}
346
347/*
348 * Buffer memory read
349 * Select the starting address and execute a SPI buffer read.
350 */
351static void enc28j60_mem_read(struct enc28j60_net *priv, u16 addr, int len,
352 u8 *data)
353{
354 mutex_lock(&priv->lock);
355 nolock_regw_write(priv, ERDPTL, addr);
356#ifdef CONFIG_ENC28J60_WRITEVERIFY
357 if (netif_msg_drv(priv)) {
358 struct device *dev = &priv->spi->dev;
359 u16 reg;
360
361 reg = nolock_regw_read(priv, ERDPTL);
362 if (reg != addr)
363 dev_printk(KERN_DEBUG, dev,
364 "%s() error writing ERDPT (0x%04x - 0x%04x)\n",
365 __func__, reg, addr);
366 }
367#endif
368 spi_read_buf(priv, len, data);
369 mutex_unlock(&priv->lock);
370}
371
372/*
373 * Write packet to enc28j60 TX buffer memory
374 */
375static void
376enc28j60_packet_write(struct enc28j60_net *priv, int len, const u8 *data)
377{
378 struct device *dev = &priv->spi->dev;
379
380 mutex_lock(&priv->lock);
381 /* Set the write pointer to start of transmit buffer area */
382 nolock_regw_write(priv, EWRPTL, TXSTART_INIT);
383#ifdef CONFIG_ENC28J60_WRITEVERIFY
384 if (netif_msg_drv(priv)) {
385 u16 reg;
386 reg = nolock_regw_read(priv, EWRPTL);
387 if (reg != TXSTART_INIT)
388 dev_printk(KERN_DEBUG, dev,
389 "%s() ERWPT:0x%04x != 0x%04x\n",
390 __func__, reg, TXSTART_INIT);
391 }
392#endif
393 /* Set the TXND pointer to correspond to the packet size given */
394 nolock_regw_write(priv, ETXNDL, TXSTART_INIT + len);
395 /* write per-packet control byte */
396 spi_write_op(priv, ENC28J60_WRITE_BUF_MEM, 0, 0x00);
397 if (netif_msg_hw(priv))
398 dev_printk(KERN_DEBUG, dev,
399 "%s() after control byte ERWPT:0x%04x\n",
400 __func__, nolock_regw_read(priv, EWRPTL));
401 /* copy the packet into the transmit buffer */
402 spi_write_buf(priv, len, data);
403 if (netif_msg_hw(priv))
404 dev_printk(KERN_DEBUG, dev,
405 "%s() after write packet ERWPT:0x%04x, len=%d\n",
406 __func__, nolock_regw_read(priv, EWRPTL), len);
407 mutex_unlock(&priv->lock);
408}
409
410static int poll_ready(struct enc28j60_net *priv, u8 reg, u8 mask, u8 val)
411{
412 struct device *dev = &priv->spi->dev;
413 unsigned long timeout = jiffies + msecs_to_jiffies(20);
414
415 /* 20 msec timeout read */
416 while ((nolock_regb_read(priv, reg) & mask) != val) {
417 if (time_after(jiffies, timeout)) {
418 if (netif_msg_drv(priv))
419 dev_dbg(dev, "reg %02x ready timeout!\n", reg);
420 return -ETIMEDOUT;
421 }
422 cpu_relax();
423 }
424 return 0;
425}
426
427/*
428 * Wait until the PHY operation is complete.
429 */
430static int wait_phy_ready(struct enc28j60_net *priv)
431{
432 return poll_ready(priv, MISTAT, MISTAT_BUSY, 0) ? 0 : 1;
433}
434
435/*
436 * PHY register read
437 * PHY registers are not accessed directly, but through the MII.
438 */
439static u16 enc28j60_phy_read(struct enc28j60_net *priv, u8 address)
440{
441 u16 ret;
442
443 mutex_lock(&priv->lock);
444 /* set the PHY register address */
445 nolock_regb_write(priv, MIREGADR, address);
446 /* start the register read operation */
447 nolock_regb_write(priv, MICMD, MICMD_MIIRD);
448 /* wait until the PHY read completes */
449 wait_phy_ready(priv);
450 /* quit reading */
451 nolock_regb_write(priv, MICMD, 0x00);
452 /* return the data */
453 ret = nolock_regw_read(priv, MIRDL);
454 mutex_unlock(&priv->lock);
455
456 return ret;
457}
458
459static int enc28j60_phy_write(struct enc28j60_net *priv, u8 address, u16 data)
460{
461 int ret;
462
463 mutex_lock(&priv->lock);
464 /* set the PHY register address */
465 nolock_regb_write(priv, MIREGADR, address);
466 /* write the PHY data */
467 nolock_regw_write(priv, MIWRL, data);
468 /* wait until the PHY write completes and return */
469 ret = wait_phy_ready(priv);
470 mutex_unlock(&priv->lock);
471
472 return ret;
473}
474
475/*
476 * Program the hardware MAC address from dev->dev_addr.
477 */
478static int enc28j60_set_hw_macaddr(struct net_device *ndev)
479{
480 int ret;
481 struct enc28j60_net *priv = netdev_priv(ndev);
482 struct device *dev = &priv->spi->dev;
483
484 mutex_lock(&priv->lock);
485 if (!priv->hw_enable) {
486 if (netif_msg_drv(priv))
487 dev_info(dev, "%s: Setting MAC address to %pM\n",
488 ndev->name, ndev->dev_addr);
489 /* NOTE: MAC address in ENC28J60 is byte-backward */
490 nolock_regb_write(priv, MAADR5, ndev->dev_addr[0]);
491 nolock_regb_write(priv, MAADR4, ndev->dev_addr[1]);
492 nolock_regb_write(priv, MAADR3, ndev->dev_addr[2]);
493 nolock_regb_write(priv, MAADR2, ndev->dev_addr[3]);
494 nolock_regb_write(priv, MAADR1, ndev->dev_addr[4]);
495 nolock_regb_write(priv, MAADR0, ndev->dev_addr[5]);
496 ret = 0;
497 } else {
498 if (netif_msg_drv(priv))
499 dev_printk(KERN_DEBUG, dev,
500 "%s() Hardware must be disabled to set Mac address\n",
501 __func__);
502 ret = -EBUSY;
503 }
504 mutex_unlock(&priv->lock);
505 return ret;
506}
507
508/*
509 * Store the new hardware address in dev->dev_addr, and update the MAC.
510 */
511static int enc28j60_set_mac_address(struct net_device *dev, void *addr)
512{
513 struct sockaddr *address = addr;
514
515 if (netif_running(dev))
516 return -EBUSY;
517 if (!is_valid_ether_addr(address->sa_data))
518 return -EADDRNOTAVAIL;
519
520 eth_hw_addr_set(dev, address->sa_data);
521 return enc28j60_set_hw_macaddr(dev);
522}
523
524/*
525 * Debug routine to dump useful register contents
526 */
527static void enc28j60_dump_regs(struct enc28j60_net *priv, const char *msg)
528{
529 struct device *dev = &priv->spi->dev;
530
531 mutex_lock(&priv->lock);
532 dev_printk(KERN_DEBUG, dev,
533 " %s\n"
534 "HwRevID: 0x%02x\n"
535 "Cntrl: ECON1 ECON2 ESTAT EIR EIE\n"
536 " 0x%02x 0x%02x 0x%02x 0x%02x 0x%02x\n"
537 "MAC : MACON1 MACON3 MACON4\n"
538 " 0x%02x 0x%02x 0x%02x\n"
539 "Rx : ERXST ERXND ERXWRPT ERXRDPT ERXFCON EPKTCNT MAMXFL\n"
540 " 0x%04x 0x%04x 0x%04x 0x%04x "
541 "0x%02x 0x%02x 0x%04x\n"
542 "Tx : ETXST ETXND MACLCON1 MACLCON2 MAPHSUP\n"
543 " 0x%04x 0x%04x 0x%02x 0x%02x 0x%02x\n",
544 msg, nolock_regb_read(priv, EREVID),
545 nolock_regb_read(priv, ECON1), nolock_regb_read(priv, ECON2),
546 nolock_regb_read(priv, ESTAT), nolock_regb_read(priv, EIR),
547 nolock_regb_read(priv, EIE), nolock_regb_read(priv, MACON1),
548 nolock_regb_read(priv, MACON3), nolock_regb_read(priv, MACON4),
549 nolock_regw_read(priv, ERXSTL), nolock_regw_read(priv, ERXNDL),
550 nolock_regw_read(priv, ERXWRPTL),
551 nolock_regw_read(priv, ERXRDPTL),
552 nolock_regb_read(priv, ERXFCON),
553 nolock_regb_read(priv, EPKTCNT),
554 nolock_regw_read(priv, MAMXFLL), nolock_regw_read(priv, ETXSTL),
555 nolock_regw_read(priv, ETXNDL),
556 nolock_regb_read(priv, MACLCON1),
557 nolock_regb_read(priv, MACLCON2),
558 nolock_regb_read(priv, MAPHSUP));
559 mutex_unlock(&priv->lock);
560}
561
562/*
563 * ERXRDPT need to be set always at odd addresses, refer to errata datasheet
564 */
565static u16 erxrdpt_workaround(u16 next_packet_ptr, u16 start, u16 end)
566{
567 u16 erxrdpt;
568
569 if ((next_packet_ptr - 1 < start) || (next_packet_ptr - 1 > end))
570 erxrdpt = end;
571 else
572 erxrdpt = next_packet_ptr - 1;
573
574 return erxrdpt;
575}
576
577/*
578 * Calculate wrap around when reading beyond the end of the RX buffer
579 */
580static u16 rx_packet_start(u16 ptr)
581{
582 if (ptr + RSV_SIZE > RXEND_INIT)
583 return (ptr + RSV_SIZE) - (RXEND_INIT - RXSTART_INIT + 1);
584 else
585 return ptr + RSV_SIZE;
586}
587
588static void nolock_rxfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
589{
590 struct device *dev = &priv->spi->dev;
591 u16 erxrdpt;
592
593 if (start > 0x1FFF || end > 0x1FFF || start > end) {
594 if (netif_msg_drv(priv))
595 dev_err(dev, "%s(%d, %d) RXFIFO bad parameters!\n",
596 __func__, start, end);
597 return;
598 }
599 /* set receive buffer start + end */
600 priv->next_pk_ptr = start;
601 nolock_regw_write(priv, ERXSTL, start);
602 erxrdpt = erxrdpt_workaround(priv->next_pk_ptr, start, end);
603 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
604 nolock_regw_write(priv, ERXNDL, end);
605}
606
607static void nolock_txfifo_init(struct enc28j60_net *priv, u16 start, u16 end)
608{
609 struct device *dev = &priv->spi->dev;
610
611 if (start > 0x1FFF || end > 0x1FFF || start > end) {
612 if (netif_msg_drv(priv))
613 dev_err(dev, "%s(%d, %d) TXFIFO bad parameters!\n",
614 __func__, start, end);
615 return;
616 }
617 /* set transmit buffer start + end */
618 nolock_regw_write(priv, ETXSTL, start);
619 nolock_regw_write(priv, ETXNDL, end);
620}
621
622/*
623 * Low power mode shrinks power consumption about 100x, so we'd like
624 * the chip to be in that mode whenever it's inactive. (However, we
625 * can't stay in low power mode during suspend with WOL active.)
626 */
627static void enc28j60_lowpower(struct enc28j60_net *priv, bool is_low)
628{
629 struct device *dev = &priv->spi->dev;
630
631 if (netif_msg_drv(priv))
632 dev_dbg(dev, "%s power...\n", is_low ? "low" : "high");
633
634 mutex_lock(&priv->lock);
635 if (is_low) {
636 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
637 poll_ready(priv, ESTAT, ESTAT_RXBUSY, 0);
638 poll_ready(priv, ECON1, ECON1_TXRTS, 0);
639 /* ECON2_VRPS was set during initialization */
640 nolock_reg_bfset(priv, ECON2, ECON2_PWRSV);
641 } else {
642 nolock_reg_bfclr(priv, ECON2, ECON2_PWRSV);
643 poll_ready(priv, ESTAT, ESTAT_CLKRDY, ESTAT_CLKRDY);
644 /* caller sets ECON1_RXEN */
645 }
646 mutex_unlock(&priv->lock);
647}
648
649static int enc28j60_hw_init(struct enc28j60_net *priv)
650{
651 struct device *dev = &priv->spi->dev;
652 u8 reg;
653
654 if (netif_msg_drv(priv))
655 dev_printk(KERN_DEBUG, dev, "%s() - %s\n", __func__,
656 priv->full_duplex ? "FullDuplex" : "HalfDuplex");
657
658 mutex_lock(&priv->lock);
659 /* first reset the chip */
660 enc28j60_soft_reset(priv);
661 /* Clear ECON1 */
662 spi_write_op(priv, ENC28J60_WRITE_CTRL_REG, ECON1, 0x00);
663 priv->bank = 0;
664 priv->hw_enable = false;
665 priv->tx_retry_count = 0;
666 priv->max_pk_counter = 0;
667 priv->rxfilter = RXFILTER_NORMAL;
668 /* enable address auto increment and voltage regulator powersave */
669 nolock_regb_write(priv, ECON2, ECON2_AUTOINC | ECON2_VRPS);
670
671 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
672 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
673 mutex_unlock(&priv->lock);
674
675 /*
676 * Check the RevID.
677 * If it's 0x00 or 0xFF probably the enc28j60 is not mounted or
678 * damaged.
679 */
680 reg = locked_regb_read(priv, EREVID);
681 if (netif_msg_drv(priv))
682 dev_info(dev, "chip RevID: 0x%02x\n", reg);
683 if (reg == 0x00 || reg == 0xff) {
684 if (netif_msg_drv(priv))
685 dev_printk(KERN_DEBUG, dev, "%s() Invalid RevId %d\n",
686 __func__, reg);
687 return 0;
688 }
689
690 /* default filter mode: (unicast OR broadcast) AND crc valid */
691 locked_regb_write(priv, ERXFCON,
692 ERXFCON_UCEN | ERXFCON_CRCEN | ERXFCON_BCEN);
693
694 /* enable MAC receive */
695 locked_regb_write(priv, MACON1,
696 MACON1_MARXEN | MACON1_TXPAUS | MACON1_RXPAUS);
697 /* enable automatic padding and CRC operations */
698 if (priv->full_duplex) {
699 locked_regb_write(priv, MACON3,
700 MACON3_PADCFG0 | MACON3_TXCRCEN |
701 MACON3_FRMLNEN | MACON3_FULDPX);
702 /* set inter-frame gap (non-back-to-back) */
703 locked_regb_write(priv, MAIPGL, 0x12);
704 /* set inter-frame gap (back-to-back) */
705 locked_regb_write(priv, MABBIPG, 0x15);
706 } else {
707 locked_regb_write(priv, MACON3,
708 MACON3_PADCFG0 | MACON3_TXCRCEN |
709 MACON3_FRMLNEN);
710 locked_regb_write(priv, MACON4, 1 << 6); /* DEFER bit */
711 /* set inter-frame gap (non-back-to-back) */
712 locked_regw_write(priv, MAIPGL, 0x0C12);
713 /* set inter-frame gap (back-to-back) */
714 locked_regb_write(priv, MABBIPG, 0x12);
715 }
716 /*
717 * MACLCON1 (default)
718 * MACLCON2 (default)
719 * Set the maximum packet size which the controller will accept.
720 */
721 locked_regw_write(priv, MAMXFLL, MAX_FRAMELEN);
722
723 /* Configure LEDs */
724 if (!enc28j60_phy_write(priv, PHLCON, ENC28J60_LAMPS_MODE))
725 return 0;
726
727 if (priv->full_duplex) {
728 if (!enc28j60_phy_write(priv, PHCON1, PHCON1_PDPXMD))
729 return 0;
730 if (!enc28j60_phy_write(priv, PHCON2, 0x00))
731 return 0;
732 } else {
733 if (!enc28j60_phy_write(priv, PHCON1, 0x00))
734 return 0;
735 if (!enc28j60_phy_write(priv, PHCON2, PHCON2_HDLDIS))
736 return 0;
737 }
738 if (netif_msg_hw(priv))
739 enc28j60_dump_regs(priv, "Hw initialized.");
740
741 return 1;
742}
743
744static void enc28j60_hw_enable(struct enc28j60_net *priv)
745{
746 struct device *dev = &priv->spi->dev;
747
748 /* enable interrupts */
749 if (netif_msg_hw(priv))
750 dev_printk(KERN_DEBUG, dev, "%s() enabling interrupts.\n",
751 __func__);
752
753 enc28j60_phy_write(priv, PHIE, PHIE_PGEIE | PHIE_PLNKIE);
754
755 mutex_lock(&priv->lock);
756 nolock_reg_bfclr(priv, EIR, EIR_DMAIF | EIR_LINKIF |
757 EIR_TXIF | EIR_TXERIF | EIR_RXERIF | EIR_PKTIF);
758 nolock_regb_write(priv, EIE, EIE_INTIE | EIE_PKTIE | EIE_LINKIE |
759 EIE_TXIE | EIE_TXERIE | EIE_RXERIE);
760
761 /* enable receive logic */
762 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
763 priv->hw_enable = true;
764 mutex_unlock(&priv->lock);
765}
766
767static void enc28j60_hw_disable(struct enc28j60_net *priv)
768{
769 mutex_lock(&priv->lock);
770 /* disable interrupts and packet reception */
771 nolock_regb_write(priv, EIE, 0x00);
772 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
773 priv->hw_enable = false;
774 mutex_unlock(&priv->lock);
775}
776
777static int
778enc28j60_setlink(struct net_device *ndev, u8 autoneg, u16 speed, u8 duplex)
779{
780 struct enc28j60_net *priv = netdev_priv(ndev);
781 int ret = 0;
782
783 if (!priv->hw_enable) {
784 /* link is in low power mode now; duplex setting
785 * will take effect on next enc28j60_hw_init().
786 */
787 if (autoneg == AUTONEG_DISABLE && speed == SPEED_10)
788 priv->full_duplex = (duplex == DUPLEX_FULL);
789 else {
790 if (netif_msg_link(priv))
791 netdev_warn(ndev, "unsupported link setting\n");
792 ret = -EOPNOTSUPP;
793 }
794 } else {
795 if (netif_msg_link(priv))
796 netdev_warn(ndev, "Warning: hw must be disabled to set link mode\n");
797 ret = -EBUSY;
798 }
799 return ret;
800}
801
802/*
803 * Read the Transmit Status Vector
804 */
805static void enc28j60_read_tsv(struct enc28j60_net *priv, u8 tsv[TSV_SIZE])
806{
807 struct device *dev = &priv->spi->dev;
808 int endptr;
809
810 endptr = locked_regw_read(priv, ETXNDL);
811 if (netif_msg_hw(priv))
812 dev_printk(KERN_DEBUG, dev, "reading TSV at addr:0x%04x\n",
813 endptr + 1);
814 enc28j60_mem_read(priv, endptr + 1, TSV_SIZE, tsv);
815}
816
817static void enc28j60_dump_tsv(struct enc28j60_net *priv, const char *msg,
818 u8 tsv[TSV_SIZE])
819{
820 struct device *dev = &priv->spi->dev;
821 u16 tmp1, tmp2;
822
823 dev_printk(KERN_DEBUG, dev, "%s - TSV:\n", msg);
824 tmp1 = tsv[1];
825 tmp1 <<= 8;
826 tmp1 |= tsv[0];
827
828 tmp2 = tsv[5];
829 tmp2 <<= 8;
830 tmp2 |= tsv[4];
831
832 dev_printk(KERN_DEBUG, dev,
833 "ByteCount: %d, CollisionCount: %d, TotByteOnWire: %d\n",
834 tmp1, tsv[2] & 0x0f, tmp2);
835 dev_printk(KERN_DEBUG, dev,
836 "TxDone: %d, CRCErr:%d, LenChkErr: %d, LenOutOfRange: %d\n",
837 TSV_GETBIT(tsv, TSV_TXDONE),
838 TSV_GETBIT(tsv, TSV_TXCRCERROR),
839 TSV_GETBIT(tsv, TSV_TXLENCHKERROR),
840 TSV_GETBIT(tsv, TSV_TXLENOUTOFRANGE));
841 dev_printk(KERN_DEBUG, dev,
842 "Multicast: %d, Broadcast: %d, PacketDefer: %d, ExDefer: %d\n",
843 TSV_GETBIT(tsv, TSV_TXMULTICAST),
844 TSV_GETBIT(tsv, TSV_TXBROADCAST),
845 TSV_GETBIT(tsv, TSV_TXPACKETDEFER),
846 TSV_GETBIT(tsv, TSV_TXEXDEFER));
847 dev_printk(KERN_DEBUG, dev,
848 "ExCollision: %d, LateCollision: %d, Giant: %d, Underrun: %d\n",
849 TSV_GETBIT(tsv, TSV_TXEXCOLLISION),
850 TSV_GETBIT(tsv, TSV_TXLATECOLLISION),
851 TSV_GETBIT(tsv, TSV_TXGIANT), TSV_GETBIT(tsv, TSV_TXUNDERRUN));
852 dev_printk(KERN_DEBUG, dev,
853 "ControlFrame: %d, PauseFrame: %d, BackPressApp: %d, VLanTagFrame: %d\n",
854 TSV_GETBIT(tsv, TSV_TXCONTROLFRAME),
855 TSV_GETBIT(tsv, TSV_TXPAUSEFRAME),
856 TSV_GETBIT(tsv, TSV_BACKPRESSUREAPP),
857 TSV_GETBIT(tsv, TSV_TXVLANTAGFRAME));
858}
859
860/*
861 * Receive Status vector
862 */
863static void enc28j60_dump_rsv(struct enc28j60_net *priv, const char *msg,
864 u16 pk_ptr, int len, u16 sts)
865{
866 struct device *dev = &priv->spi->dev;
867
868 dev_printk(KERN_DEBUG, dev, "%s - NextPk: 0x%04x - RSV:\n", msg, pk_ptr);
869 dev_printk(KERN_DEBUG, dev, "ByteCount: %d, DribbleNibble: %d\n",
870 len, RSV_GETBIT(sts, RSV_DRIBBLENIBBLE));
871 dev_printk(KERN_DEBUG, dev,
872 "RxOK: %d, CRCErr:%d, LenChkErr: %d, LenOutOfRange: %d\n",
873 RSV_GETBIT(sts, RSV_RXOK),
874 RSV_GETBIT(sts, RSV_CRCERROR),
875 RSV_GETBIT(sts, RSV_LENCHECKERR),
876 RSV_GETBIT(sts, RSV_LENOUTOFRANGE));
877 dev_printk(KERN_DEBUG, dev,
878 "Multicast: %d, Broadcast: %d, LongDropEvent: %d, CarrierEvent: %d\n",
879 RSV_GETBIT(sts, RSV_RXMULTICAST),
880 RSV_GETBIT(sts, RSV_RXBROADCAST),
881 RSV_GETBIT(sts, RSV_RXLONGEVDROPEV),
882 RSV_GETBIT(sts, RSV_CARRIEREV));
883 dev_printk(KERN_DEBUG, dev,
884 "ControlFrame: %d, PauseFrame: %d, UnknownOp: %d, VLanTagFrame: %d\n",
885 RSV_GETBIT(sts, RSV_RXCONTROLFRAME),
886 RSV_GETBIT(sts, RSV_RXPAUSEFRAME),
887 RSV_GETBIT(sts, RSV_RXUNKNOWNOPCODE),
888 RSV_GETBIT(sts, RSV_RXTYPEVLAN));
889}
890
891static void dump_packet(const char *msg, int len, const char *data)
892{
893 printk(KERN_DEBUG DRV_NAME ": %s - packet len:%d\n", msg, len);
894 print_hex_dump(KERN_DEBUG, "pk data: ", DUMP_PREFIX_OFFSET, 16, 1,
895 data, len, true);
896}
897
898/*
899 * Hardware receive function.
900 * Read the buffer memory, update the FIFO pointer to free the buffer,
901 * check the status vector and decrement the packet counter.
902 */
903static void enc28j60_hw_rx(struct net_device *ndev)
904{
905 struct enc28j60_net *priv = netdev_priv(ndev);
906 struct device *dev = &priv->spi->dev;
907 struct sk_buff *skb = NULL;
908 u16 erxrdpt, next_packet, rxstat;
909 u8 rsv[RSV_SIZE];
910 int len;
911
912 if (netif_msg_rx_status(priv))
913 netdev_printk(KERN_DEBUG, ndev, "RX pk_addr:0x%04x\n",
914 priv->next_pk_ptr);
915
916 if (unlikely(priv->next_pk_ptr > RXEND_INIT)) {
917 if (netif_msg_rx_err(priv))
918 netdev_err(ndev, "%s() Invalid packet address!! 0x%04x\n",
919 __func__, priv->next_pk_ptr);
920 /* packet address corrupted: reset RX logic */
921 mutex_lock(&priv->lock);
922 nolock_reg_bfclr(priv, ECON1, ECON1_RXEN);
923 nolock_reg_bfset(priv, ECON1, ECON1_RXRST);
924 nolock_reg_bfclr(priv, ECON1, ECON1_RXRST);
925 nolock_rxfifo_init(priv, RXSTART_INIT, RXEND_INIT);
926 nolock_reg_bfclr(priv, EIR, EIR_RXERIF);
927 nolock_reg_bfset(priv, ECON1, ECON1_RXEN);
928 mutex_unlock(&priv->lock);
929 ndev->stats.rx_errors++;
930 return;
931 }
932 /* Read next packet pointer and rx status vector */
933 enc28j60_mem_read(priv, priv->next_pk_ptr, sizeof(rsv), rsv);
934
935 next_packet = rsv[1];
936 next_packet <<= 8;
937 next_packet |= rsv[0];
938
939 len = rsv[3];
940 len <<= 8;
941 len |= rsv[2];
942
943 rxstat = rsv[5];
944 rxstat <<= 8;
945 rxstat |= rsv[4];
946
947 if (netif_msg_rx_status(priv))
948 enc28j60_dump_rsv(priv, __func__, next_packet, len, rxstat);
949
950 if (!RSV_GETBIT(rxstat, RSV_RXOK) || len > MAX_FRAMELEN) {
951 if (netif_msg_rx_err(priv))
952 netdev_err(ndev, "Rx Error (%04x)\n", rxstat);
953 ndev->stats.rx_errors++;
954 if (RSV_GETBIT(rxstat, RSV_CRCERROR))
955 ndev->stats.rx_crc_errors++;
956 if (RSV_GETBIT(rxstat, RSV_LENCHECKERR))
957 ndev->stats.rx_frame_errors++;
958 if (len > MAX_FRAMELEN)
959 ndev->stats.rx_over_errors++;
960 } else {
961 skb = netdev_alloc_skb(ndev, len + NET_IP_ALIGN);
962 if (!skb) {
963 if (netif_msg_rx_err(priv))
964 netdev_err(ndev, "out of memory for Rx'd frame\n");
965 ndev->stats.rx_dropped++;
966 } else {
967 skb_reserve(skb, NET_IP_ALIGN);
968 /* copy the packet from the receive buffer */
969 enc28j60_mem_read(priv,
970 rx_packet_start(priv->next_pk_ptr),
971 len, skb_put(skb, len));
972 if (netif_msg_pktdata(priv))
973 dump_packet(__func__, skb->len, skb->data);
974 skb->protocol = eth_type_trans(skb, ndev);
975 /* update statistics */
976 ndev->stats.rx_packets++;
977 ndev->stats.rx_bytes += len;
978 netif_rx(skb);
979 }
980 }
981 /*
982 * Move the RX read pointer to the start of the next
983 * received packet.
984 * This frees the memory we just read out.
985 */
986 erxrdpt = erxrdpt_workaround(next_packet, RXSTART_INIT, RXEND_INIT);
987 if (netif_msg_hw(priv))
988 dev_printk(KERN_DEBUG, dev, "%s() ERXRDPT:0x%04x\n",
989 __func__, erxrdpt);
990
991 mutex_lock(&priv->lock);
992 nolock_regw_write(priv, ERXRDPTL, erxrdpt);
993#ifdef CONFIG_ENC28J60_WRITEVERIFY
994 if (netif_msg_drv(priv)) {
995 u16 reg;
996 reg = nolock_regw_read(priv, ERXRDPTL);
997 if (reg != erxrdpt)
998 dev_printk(KERN_DEBUG, dev,
999 "%s() ERXRDPT verify error (0x%04x - 0x%04x)\n",
1000 __func__, reg, erxrdpt);
1001 }
1002#endif
1003 priv->next_pk_ptr = next_packet;
1004 /* we are done with this packet, decrement the packet counter */
1005 nolock_reg_bfset(priv, ECON2, ECON2_PKTDEC);
1006 mutex_unlock(&priv->lock);
1007}
1008
1009/*
1010 * Calculate free space in RxFIFO
1011 */
1012static int enc28j60_get_free_rxfifo(struct enc28j60_net *priv)
1013{
1014 struct net_device *ndev = priv->netdev;
1015 int epkcnt, erxst, erxnd, erxwr, erxrd;
1016 int free_space;
1017
1018 mutex_lock(&priv->lock);
1019 epkcnt = nolock_regb_read(priv, EPKTCNT);
1020 if (epkcnt >= 255)
1021 free_space = -1;
1022 else {
1023 erxst = nolock_regw_read(priv, ERXSTL);
1024 erxnd = nolock_regw_read(priv, ERXNDL);
1025 erxwr = nolock_regw_read(priv, ERXWRPTL);
1026 erxrd = nolock_regw_read(priv, ERXRDPTL);
1027
1028 if (erxwr > erxrd)
1029 free_space = (erxnd - erxst) - (erxwr - erxrd);
1030 else if (erxwr == erxrd)
1031 free_space = (erxnd - erxst);
1032 else
1033 free_space = erxrd - erxwr - 1;
1034 }
1035 mutex_unlock(&priv->lock);
1036 if (netif_msg_rx_status(priv))
1037 netdev_printk(KERN_DEBUG, ndev, "%s() free_space = %d\n",
1038 __func__, free_space);
1039 return free_space;
1040}
1041
1042/*
1043 * Access the PHY to determine link status
1044 */
1045static void enc28j60_check_link_status(struct net_device *ndev)
1046{
1047 struct enc28j60_net *priv = netdev_priv(ndev);
1048 struct device *dev = &priv->spi->dev;
1049 u16 reg;
1050 int duplex;
1051
1052 reg = enc28j60_phy_read(priv, PHSTAT2);
1053 if (netif_msg_hw(priv))
1054 dev_printk(KERN_DEBUG, dev,
1055 "%s() PHSTAT1: %04x, PHSTAT2: %04x\n", __func__,
1056 enc28j60_phy_read(priv, PHSTAT1), reg);
1057 duplex = reg & PHSTAT2_DPXSTAT;
1058
1059 if (reg & PHSTAT2_LSTAT) {
1060 netif_carrier_on(ndev);
1061 if (netif_msg_ifup(priv))
1062 netdev_info(ndev, "link up - %s\n",
1063 duplex ? "Full duplex" : "Half duplex");
1064 } else {
1065 if (netif_msg_ifdown(priv))
1066 netdev_info(ndev, "link down\n");
1067 netif_carrier_off(ndev);
1068 }
1069}
1070
1071static void enc28j60_tx_clear(struct net_device *ndev, bool err)
1072{
1073 struct enc28j60_net *priv = netdev_priv(ndev);
1074
1075 if (err)
1076 ndev->stats.tx_errors++;
1077 else
1078 ndev->stats.tx_packets++;
1079
1080 if (priv->tx_skb) {
1081 if (!err)
1082 ndev->stats.tx_bytes += priv->tx_skb->len;
1083 dev_kfree_skb(priv->tx_skb);
1084 priv->tx_skb = NULL;
1085 }
1086 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1087 netif_wake_queue(ndev);
1088}
1089
1090/*
1091 * RX handler
1092 * Ignore PKTIF because is unreliable! (Look at the errata datasheet)
1093 * Check EPKTCNT is the suggested workaround.
1094 * We don't need to clear interrupt flag, automatically done when
1095 * enc28j60_hw_rx() decrements the packet counter.
1096 * Returns how many packet processed.
1097 */
1098static int enc28j60_rx_interrupt(struct net_device *ndev)
1099{
1100 struct enc28j60_net *priv = netdev_priv(ndev);
1101 int pk_counter, ret;
1102
1103 pk_counter = locked_regb_read(priv, EPKTCNT);
1104 if (pk_counter && netif_msg_intr(priv))
1105 netdev_printk(KERN_DEBUG, ndev, "intRX, pk_cnt: %d\n",
1106 pk_counter);
1107 if (pk_counter > priv->max_pk_counter) {
1108 /* update statistics */
1109 priv->max_pk_counter = pk_counter;
1110 if (netif_msg_rx_status(priv) && priv->max_pk_counter > 1)
1111 netdev_printk(KERN_DEBUG, ndev, "RX max_pk_cnt: %d\n",
1112 priv->max_pk_counter);
1113 }
1114 ret = pk_counter;
1115 while (pk_counter-- > 0)
1116 enc28j60_hw_rx(ndev);
1117
1118 return ret;
1119}
1120
1121static void enc28j60_irq_work_handler(struct work_struct *work)
1122{
1123 struct enc28j60_net *priv =
1124 container_of(work, struct enc28j60_net, irq_work);
1125 struct net_device *ndev = priv->netdev;
1126 int intflags, loop;
1127
1128 /* disable further interrupts */
1129 locked_reg_bfclr(priv, EIE, EIE_INTIE);
1130
1131 do {
1132 loop = 0;
1133 intflags = locked_regb_read(priv, EIR);
1134 /* DMA interrupt handler (not currently used) */
1135 if ((intflags & EIR_DMAIF) != 0) {
1136 loop++;
1137 if (netif_msg_intr(priv))
1138 netdev_printk(KERN_DEBUG, ndev, "intDMA(%d)\n",
1139 loop);
1140 locked_reg_bfclr(priv, EIR, EIR_DMAIF);
1141 }
1142 /* LINK changed handler */
1143 if ((intflags & EIR_LINKIF) != 0) {
1144 loop++;
1145 if (netif_msg_intr(priv))
1146 netdev_printk(KERN_DEBUG, ndev, "intLINK(%d)\n",
1147 loop);
1148 enc28j60_check_link_status(ndev);
1149 /* read PHIR to clear the flag */
1150 enc28j60_phy_read(priv, PHIR);
1151 }
1152 /* TX complete handler */
1153 if (((intflags & EIR_TXIF) != 0) &&
1154 ((intflags & EIR_TXERIF) == 0)) {
1155 bool err = false;
1156 loop++;
1157 if (netif_msg_intr(priv))
1158 netdev_printk(KERN_DEBUG, ndev, "intTX(%d)\n",
1159 loop);
1160 priv->tx_retry_count = 0;
1161 if (locked_regb_read(priv, ESTAT) & ESTAT_TXABRT) {
1162 if (netif_msg_tx_err(priv))
1163 netdev_err(ndev, "Tx Error (aborted)\n");
1164 err = true;
1165 }
1166 if (netif_msg_tx_done(priv)) {
1167 u8 tsv[TSV_SIZE];
1168 enc28j60_read_tsv(priv, tsv);
1169 enc28j60_dump_tsv(priv, "Tx Done", tsv);
1170 }
1171 enc28j60_tx_clear(ndev, err);
1172 locked_reg_bfclr(priv, EIR, EIR_TXIF);
1173 }
1174 /* TX Error handler */
1175 if ((intflags & EIR_TXERIF) != 0) {
1176 u8 tsv[TSV_SIZE];
1177
1178 loop++;
1179 if (netif_msg_intr(priv))
1180 netdev_printk(KERN_DEBUG, ndev, "intTXErr(%d)\n",
1181 loop);
1182 locked_reg_bfclr(priv, ECON1, ECON1_TXRTS);
1183 enc28j60_read_tsv(priv, tsv);
1184 if (netif_msg_tx_err(priv))
1185 enc28j60_dump_tsv(priv, "Tx Error", tsv);
1186 /* Reset TX logic */
1187 mutex_lock(&priv->lock);
1188 nolock_reg_bfset(priv, ECON1, ECON1_TXRST);
1189 nolock_reg_bfclr(priv, ECON1, ECON1_TXRST);
1190 nolock_txfifo_init(priv, TXSTART_INIT, TXEND_INIT);
1191 mutex_unlock(&priv->lock);
1192 /* Transmit Late collision check for retransmit */
1193 if (TSV_GETBIT(tsv, TSV_TXLATECOLLISION)) {
1194 if (netif_msg_tx_err(priv))
1195 netdev_printk(KERN_DEBUG, ndev,
1196 "LateCollision TXErr (%d)\n",
1197 priv->tx_retry_count);
1198 if (priv->tx_retry_count++ < MAX_TX_RETRYCOUNT)
1199 locked_reg_bfset(priv, ECON1,
1200 ECON1_TXRTS);
1201 else
1202 enc28j60_tx_clear(ndev, true);
1203 } else
1204 enc28j60_tx_clear(ndev, true);
1205 locked_reg_bfclr(priv, EIR, EIR_TXERIF | EIR_TXIF);
1206 }
1207 /* RX Error handler */
1208 if ((intflags & EIR_RXERIF) != 0) {
1209 loop++;
1210 if (netif_msg_intr(priv))
1211 netdev_printk(KERN_DEBUG, ndev, "intRXErr(%d)\n",
1212 loop);
1213 /* Check free FIFO space to flag RX overrun */
1214 if (enc28j60_get_free_rxfifo(priv) <= 0) {
1215 if (netif_msg_rx_err(priv))
1216 netdev_printk(KERN_DEBUG, ndev, "RX Overrun\n");
1217 ndev->stats.rx_dropped++;
1218 }
1219 locked_reg_bfclr(priv, EIR, EIR_RXERIF);
1220 }
1221 /* RX handler */
1222 if (enc28j60_rx_interrupt(ndev))
1223 loop++;
1224 } while (loop);
1225
1226 /* re-enable interrupts */
1227 locked_reg_bfset(priv, EIE, EIE_INTIE);
1228}
1229
1230/*
1231 * Hardware transmit function.
1232 * Fill the buffer memory and send the contents of the transmit buffer
1233 * onto the network
1234 */
1235static void enc28j60_hw_tx(struct enc28j60_net *priv)
1236{
1237 struct net_device *ndev = priv->netdev;
1238
1239 BUG_ON(!priv->tx_skb);
1240
1241 if (netif_msg_tx_queued(priv))
1242 netdev_printk(KERN_DEBUG, ndev, "Tx Packet Len:%d\n",
1243 priv->tx_skb->len);
1244
1245 if (netif_msg_pktdata(priv))
1246 dump_packet(__func__,
1247 priv->tx_skb->len, priv->tx_skb->data);
1248 enc28j60_packet_write(priv, priv->tx_skb->len, priv->tx_skb->data);
1249
1250#ifdef CONFIG_ENC28J60_WRITEVERIFY
1251 /* readback and verify written data */
1252 if (netif_msg_drv(priv)) {
1253 struct device *dev = &priv->spi->dev;
1254 int test_len, k;
1255 u8 test_buf[64]; /* limit the test to the first 64 bytes */
1256 int okflag;
1257
1258 test_len = priv->tx_skb->len;
1259 if (test_len > sizeof(test_buf))
1260 test_len = sizeof(test_buf);
1261
1262 /* + 1 to skip control byte */
1263 enc28j60_mem_read(priv, TXSTART_INIT + 1, test_len, test_buf);
1264 okflag = 1;
1265 for (k = 0; k < test_len; k++) {
1266 if (priv->tx_skb->data[k] != test_buf[k]) {
1267 dev_printk(KERN_DEBUG, dev,
1268 "Error, %d location differ: 0x%02x-0x%02x\n",
1269 k, priv->tx_skb->data[k], test_buf[k]);
1270 okflag = 0;
1271 }
1272 }
1273 if (!okflag)
1274 dev_printk(KERN_DEBUG, dev, "Tx write buffer, verify ERROR!\n");
1275 }
1276#endif
1277 /* set TX request flag */
1278 locked_reg_bfset(priv, ECON1, ECON1_TXRTS);
1279}
1280
1281static netdev_tx_t enc28j60_send_packet(struct sk_buff *skb,
1282 struct net_device *dev)
1283{
1284 struct enc28j60_net *priv = netdev_priv(dev);
1285
1286 /* If some error occurs while trying to transmit this
1287 * packet, you should return '1' from this function.
1288 * In such a case you _may not_ do anything to the
1289 * SKB, it is still owned by the network queueing
1290 * layer when an error is returned. This means you
1291 * may not modify any SKB fields, you may not free
1292 * the SKB, etc.
1293 */
1294 netif_stop_queue(dev);
1295
1296 /* Remember the skb for deferred processing */
1297 priv->tx_skb = skb;
1298 schedule_work(&priv->tx_work);
1299
1300 return NETDEV_TX_OK;
1301}
1302
1303static void enc28j60_tx_work_handler(struct work_struct *work)
1304{
1305 struct enc28j60_net *priv =
1306 container_of(work, struct enc28j60_net, tx_work);
1307
1308 /* actual delivery of data */
1309 enc28j60_hw_tx(priv);
1310}
1311
1312static irqreturn_t enc28j60_irq(int irq, void *dev_id)
1313{
1314 struct enc28j60_net *priv = dev_id;
1315
1316 /*
1317 * Can't do anything in interrupt context because we need to
1318 * block (spi_sync() is blocking) so fire of the interrupt
1319 * handling workqueue.
1320 * Remember that we access enc28j60 registers through SPI bus
1321 * via spi_sync() call.
1322 */
1323 schedule_work(&priv->irq_work);
1324
1325 return IRQ_HANDLED;
1326}
1327
1328static void enc28j60_tx_timeout(struct net_device *ndev, unsigned int txqueue)
1329{
1330 struct enc28j60_net *priv = netdev_priv(ndev);
1331
1332 if (netif_msg_timer(priv))
1333 netdev_err(ndev, "tx timeout\n");
1334
1335 ndev->stats.tx_errors++;
1336 /* can't restart safely under softirq */
1337 schedule_work(&priv->restart_work);
1338}
1339
1340/*
1341 * Open/initialize the board. This is called (in the current kernel)
1342 * sometime after booting when the 'ifconfig' program is run.
1343 *
1344 * This routine should set everything up anew at each open, even
1345 * registers that "should" only need to be set once at boot, so that
1346 * there is non-reboot way to recover if something goes wrong.
1347 */
1348static int enc28j60_net_open(struct net_device *dev)
1349{
1350 struct enc28j60_net *priv = netdev_priv(dev);
1351
1352 if (!is_valid_ether_addr(dev->dev_addr)) {
1353 if (netif_msg_ifup(priv))
1354 netdev_err(dev, "invalid MAC address %pM\n", dev->dev_addr);
1355 return -EADDRNOTAVAIL;
1356 }
1357 /* Reset the hardware here (and take it out of low power mode) */
1358 enc28j60_lowpower(priv, false);
1359 enc28j60_hw_disable(priv);
1360 if (!enc28j60_hw_init(priv)) {
1361 if (netif_msg_ifup(priv))
1362 netdev_err(dev, "hw_reset() failed\n");
1363 return -EINVAL;
1364 }
1365 /* Update the MAC address (in case user has changed it) */
1366 enc28j60_set_hw_macaddr(dev);
1367 /* Enable interrupts */
1368 enc28j60_hw_enable(priv);
1369 /* check link status */
1370 enc28j60_check_link_status(dev);
1371 /* We are now ready to accept transmit requests from
1372 * the queueing layer of the networking.
1373 */
1374 netif_start_queue(dev);
1375
1376 return 0;
1377}
1378
1379/* The inverse routine to net_open(). */
1380static int enc28j60_net_close(struct net_device *dev)
1381{
1382 struct enc28j60_net *priv = netdev_priv(dev);
1383
1384 enc28j60_hw_disable(priv);
1385 enc28j60_lowpower(priv, true);
1386 netif_stop_queue(dev);
1387
1388 return 0;
1389}
1390
1391/*
1392 * Set or clear the multicast filter for this adapter
1393 * num_addrs == -1 Promiscuous mode, receive all packets
1394 * num_addrs == 0 Normal mode, filter out multicast packets
1395 * num_addrs > 0 Multicast mode, receive normal and MC packets
1396 */
1397static void enc28j60_set_multicast_list(struct net_device *dev)
1398{
1399 struct enc28j60_net *priv = netdev_priv(dev);
1400 int oldfilter = priv->rxfilter;
1401
1402 if (dev->flags & IFF_PROMISC) {
1403 if (netif_msg_link(priv))
1404 netdev_info(dev, "promiscuous mode\n");
1405 priv->rxfilter = RXFILTER_PROMISC;
1406 } else if ((dev->flags & IFF_ALLMULTI) || !netdev_mc_empty(dev)) {
1407 if (netif_msg_link(priv))
1408 netdev_info(dev, "%smulticast mode\n",
1409 (dev->flags & IFF_ALLMULTI) ? "all-" : "");
1410 priv->rxfilter = RXFILTER_MULTI;
1411 } else {
1412 if (netif_msg_link(priv))
1413 netdev_info(dev, "normal mode\n");
1414 priv->rxfilter = RXFILTER_NORMAL;
1415 }
1416
1417 if (oldfilter != priv->rxfilter)
1418 schedule_work(&priv->setrx_work);
1419}
1420
1421static void enc28j60_setrx_work_handler(struct work_struct *work)
1422{
1423 struct enc28j60_net *priv =
1424 container_of(work, struct enc28j60_net, setrx_work);
1425 struct device *dev = &priv->spi->dev;
1426
1427 if (priv->rxfilter == RXFILTER_PROMISC) {
1428 if (netif_msg_drv(priv))
1429 dev_printk(KERN_DEBUG, dev, "promiscuous mode\n");
1430 locked_regb_write(priv, ERXFCON, 0x00);
1431 } else if (priv->rxfilter == RXFILTER_MULTI) {
1432 if (netif_msg_drv(priv))
1433 dev_printk(KERN_DEBUG, dev, "multicast mode\n");
1434 locked_regb_write(priv, ERXFCON,
1435 ERXFCON_UCEN | ERXFCON_CRCEN |
1436 ERXFCON_BCEN | ERXFCON_MCEN);
1437 } else {
1438 if (netif_msg_drv(priv))
1439 dev_printk(KERN_DEBUG, dev, "normal mode\n");
1440 locked_regb_write(priv, ERXFCON,
1441 ERXFCON_UCEN | ERXFCON_CRCEN |
1442 ERXFCON_BCEN);
1443 }
1444}
1445
1446static void enc28j60_restart_work_handler(struct work_struct *work)
1447{
1448 struct enc28j60_net *priv =
1449 container_of(work, struct enc28j60_net, restart_work);
1450 struct net_device *ndev = priv->netdev;
1451 int ret;
1452
1453 rtnl_lock();
1454 if (netif_running(ndev)) {
1455 enc28j60_net_close(ndev);
1456 ret = enc28j60_net_open(ndev);
1457 if (unlikely(ret)) {
1458 netdev_info(ndev, "could not restart %d\n", ret);
1459 dev_close(ndev);
1460 }
1461 }
1462 rtnl_unlock();
1463}
1464
1465/* ......................... ETHTOOL SUPPORT ........................... */
1466
1467static void
1468enc28j60_get_drvinfo(struct net_device *dev, struct ethtool_drvinfo *info)
1469{
1470 strscpy(info->driver, DRV_NAME, sizeof(info->driver));
1471 strscpy(info->version, DRV_VERSION, sizeof(info->version));
1472 strscpy(info->bus_info,
1473 dev_name(dev->dev.parent), sizeof(info->bus_info));
1474}
1475
1476static int
1477enc28j60_get_link_ksettings(struct net_device *dev,
1478 struct ethtool_link_ksettings *cmd)
1479{
1480 struct enc28j60_net *priv = netdev_priv(dev);
1481
1482 ethtool_link_ksettings_zero_link_mode(cmd, supported);
1483 ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Half);
1484 ethtool_link_ksettings_add_link_mode(cmd, supported, 10baseT_Full);
1485 ethtool_link_ksettings_add_link_mode(cmd, supported, TP);
1486
1487 cmd->base.speed = SPEED_10;
1488 cmd->base.duplex = priv->full_duplex ? DUPLEX_FULL : DUPLEX_HALF;
1489 cmd->base.port = PORT_TP;
1490 cmd->base.autoneg = AUTONEG_DISABLE;
1491
1492 return 0;
1493}
1494
1495static int
1496enc28j60_set_link_ksettings(struct net_device *dev,
1497 const struct ethtool_link_ksettings *cmd)
1498{
1499 return enc28j60_setlink(dev, cmd->base.autoneg,
1500 cmd->base.speed, cmd->base.duplex);
1501}
1502
1503static u32 enc28j60_get_msglevel(struct net_device *dev)
1504{
1505 struct enc28j60_net *priv = netdev_priv(dev);
1506 return priv->msg_enable;
1507}
1508
1509static void enc28j60_set_msglevel(struct net_device *dev, u32 val)
1510{
1511 struct enc28j60_net *priv = netdev_priv(dev);
1512 priv->msg_enable = val;
1513}
1514
1515static const struct ethtool_ops enc28j60_ethtool_ops = {
1516 .get_drvinfo = enc28j60_get_drvinfo,
1517 .get_msglevel = enc28j60_get_msglevel,
1518 .set_msglevel = enc28j60_set_msglevel,
1519 .get_link_ksettings = enc28j60_get_link_ksettings,
1520 .set_link_ksettings = enc28j60_set_link_ksettings,
1521};
1522
1523static int enc28j60_chipset_init(struct net_device *dev)
1524{
1525 struct enc28j60_net *priv = netdev_priv(dev);
1526
1527 return enc28j60_hw_init(priv);
1528}
1529
1530static const struct net_device_ops enc28j60_netdev_ops = {
1531 .ndo_open = enc28j60_net_open,
1532 .ndo_stop = enc28j60_net_close,
1533 .ndo_start_xmit = enc28j60_send_packet,
1534 .ndo_set_rx_mode = enc28j60_set_multicast_list,
1535 .ndo_set_mac_address = enc28j60_set_mac_address,
1536 .ndo_tx_timeout = enc28j60_tx_timeout,
1537 .ndo_validate_addr = eth_validate_addr,
1538};
1539
1540static int enc28j60_probe(struct spi_device *spi)
1541{
1542 struct net_device *dev;
1543 struct enc28j60_net *priv;
1544 int ret = 0;
1545
1546 if (netif_msg_drv(&debug))
1547 dev_info(&spi->dev, "Ethernet driver %s loaded\n", DRV_VERSION);
1548
1549 dev = alloc_etherdev(sizeof(struct enc28j60_net));
1550 if (!dev) {
1551 ret = -ENOMEM;
1552 goto error_alloc;
1553 }
1554 priv = netdev_priv(dev);
1555
1556 priv->netdev = dev; /* priv to netdev reference */
1557 priv->spi = spi; /* priv to spi reference */
1558 priv->msg_enable = netif_msg_init(debug.msg_enable, ENC28J60_MSG_DEFAULT);
1559 mutex_init(&priv->lock);
1560 INIT_WORK(&priv->tx_work, enc28j60_tx_work_handler);
1561 INIT_WORK(&priv->setrx_work, enc28j60_setrx_work_handler);
1562 INIT_WORK(&priv->irq_work, enc28j60_irq_work_handler);
1563 INIT_WORK(&priv->restart_work, enc28j60_restart_work_handler);
1564 spi_set_drvdata(spi, priv); /* spi to priv reference */
1565 SET_NETDEV_DEV(dev, &spi->dev);
1566
1567 if (!enc28j60_chipset_init(dev)) {
1568 if (netif_msg_probe(priv))
1569 dev_info(&spi->dev, "chip not found\n");
1570 ret = -EIO;
1571 goto error_irq;
1572 }
1573
1574 if (device_get_ethdev_address(&spi->dev, dev))
1575 eth_hw_addr_random(dev);
1576 enc28j60_set_hw_macaddr(dev);
1577
1578 /* Board setup must set the relevant edge trigger type;
1579 * level triggers won't currently work.
1580 */
1581 ret = request_irq(spi->irq, enc28j60_irq, 0, DRV_NAME, priv);
1582 if (ret < 0) {
1583 if (netif_msg_probe(priv))
1584 dev_err(&spi->dev, "request irq %d failed (ret = %d)\n",
1585 spi->irq, ret);
1586 goto error_irq;
1587 }
1588
1589 dev->if_port = IF_PORT_10BASET;
1590 dev->irq = spi->irq;
1591 dev->netdev_ops = &enc28j60_netdev_ops;
1592 dev->watchdog_timeo = TX_TIMEOUT;
1593 dev->ethtool_ops = &enc28j60_ethtool_ops;
1594
1595 enc28j60_lowpower(priv, true);
1596
1597 ret = register_netdev(dev);
1598 if (ret) {
1599 if (netif_msg_probe(priv))
1600 dev_err(&spi->dev, "register netdev failed (ret = %d)\n",
1601 ret);
1602 goto error_register;
1603 }
1604
1605 return 0;
1606
1607error_register:
1608 free_irq(spi->irq, priv);
1609error_irq:
1610 free_netdev(dev);
1611error_alloc:
1612 return ret;
1613}
1614
1615static void enc28j60_remove(struct spi_device *spi)
1616{
1617 struct enc28j60_net *priv = spi_get_drvdata(spi);
1618
1619 unregister_netdev(priv->netdev);
1620 free_irq(spi->irq, priv);
1621 free_netdev(priv->netdev);
1622}
1623
1624static const struct of_device_id enc28j60_dt_ids[] = {
1625 { .compatible = "microchip,enc28j60" },
1626 { /* sentinel */ }
1627};
1628MODULE_DEVICE_TABLE(of, enc28j60_dt_ids);
1629
1630static struct spi_driver enc28j60_driver = {
1631 .driver = {
1632 .name = DRV_NAME,
1633 .of_match_table = enc28j60_dt_ids,
1634 },
1635 .probe = enc28j60_probe,
1636 .remove = enc28j60_remove,
1637};
1638module_spi_driver(enc28j60_driver);
1639
1640MODULE_DESCRIPTION(DRV_NAME " ethernet driver");
1641MODULE_AUTHOR("Claudio Lanconelli <lanconelli.claudio@eptar.com>");
1642MODULE_LICENSE("GPL");
1643module_param_named(debug, debug.msg_enable, int, 0);
1644MODULE_PARM_DESC(debug, "Debug verbosity level in amount of bits set (0=none, ..., 31=all)");
1645MODULE_ALIAS("spi:" DRV_NAME);