1// SPDX-License-Identifier: (GPL-2.0 or MIT)
  2//
  3// Copyright (C) 2018 emtrion GmbH
  4//
  5
  6/ {
  7	aliases {
  8		boardid = &boardid;
  9		mmc0 = &usdhc3;
 10		mmc1 = &usdhc2;
 11		mmc2 = &usdhc1;
 12		mmc3 = &usdhc4;
 13	};
 14
 15	reg_wall_5p0: reg-wall5p0 {
 16		compatible = "regulator-fixed";
 17		regulator-name = "Main-Supply";
 18		regulator-min-microvolt = <5000000>;
 19		regulator-max-microvolt = <5000000>;
 20		regulator-always-on;
 21		regulator-boot-on;
 22	};
 23
 24	reg_base3p3: reg-base3p3 {
 25		compatible = "regulator-fixed";
 26		vin-supply = <&reg_wall_5p0>;
 27		regulator-name = "3V3-avari";
 28		regulator-min-microvolt = <3300000>;
 29		regulator-max-microvolt = <3300000>;
 30		regulator-always-on;
 31		regulator-boot-on;
 32	};
 33
 34	reg_base1p5: reg-base1p5 {
 35		compatible = "regulator-fixed";
 36		vin-supply = <&reg_base3p3>;
 37		regulator-name = "1V5-avari";
 38		regulator-min-microvolt = <1500000>;
 39		regulator-max-microvolt = <1500000>;
 40		regulator-always-on;
 41		regulator-boot-on;
 42	};
 43
 44	reg_usb_otg: reg-otgvbus {
 45		compatible = "regulator-fixed";
 46		vin-supply = <&reg_wall_5p0>;
 47		regulator-name = "OTG_VBUS";
 48		regulator-min-microvolt = <5000000>;
 49		regulator-max-microvolt = <5000000>;
 50		gpio = <&gpio1 8 GPIO_ACTIVE_LOW>;
 51		regulator-always-on;
 52	};
 53
 54	clk_codec: clock-codec {
 55		compatible = "fixed-clock";
 56		#clock-cells = <0>;
 57		clock-frequency  = <12000000>;
 58	};
 59
 60	sound {
 61		compatible = "fsl,imx-audio-sgtl5000";
 62		model = "emCON-avari-sgtl5000";
 63		ssi-controller = <&ssi2>;
 64		audio-codec = <&sgtl5000>;
 65		audio-routing =
 66			"Headphone Jack", "HP_OUT";
 67		mux-int-port = <2>;
 68		mux-ext-port = <3>;
 69	};
 70};
 71
 72&audmux {
 73	pinctrl-names = "default";
 74	pinctrl-0 = <&pinctrl_audmux>;
 75	status = "okay";
 76};
 77
 78&can1 {
 79	status = "okay";
 80};
 81
 82&can2 {
 83	status = "okay";
 84};
 85
 86&ecspi2 {
 87	status = "okay";
 88};
 89
 90&hdmi {
 91	ddc-i2c-bus = <&i2c2>;
 92	status = "okay";
 93};
 94
 95&i2c2 {
 96	status = "okay";
 97};
 98
 99&i2c3 {
100	clock-frequency = <100000>;
101	pinctrl-names = "default";
102	pinctrl-0 = <&pinctrl_i2c3>;
103	status = "okay";
104
105	sgtl5000: audio-codec@a {
106		compatible = "fsl,sgtl5000";
107		reg = <0x0a>;
108		#sound-dai-cells = <0>;
109		clocks = <&clk_codec>;
110		VDDA-supply = <&reg_base3p3>;
111		VDDIO-supply = <&reg_base3p3>;
112	};
113
114	captouch: touchscreen@38 {
115		compatible = "edt,edt-ft5406";
116		reg = <0x38>;
117		pinctrl-names = "default";
118		pinctrl-0 = <&pinctrl_irq_touch2 &pinctrl_emcon_gpio4>;
119		interrupt-parent = <&gpio6>;
120		interrupts = <31 IRQ_TYPE_EDGE_FALLING>;
121		wake-gpios = <&gpio2 3 GPIO_ACTIVE_HIGH>;
122		wakeup-source;
123	};
124
125	boardid: gpio@3a {
126		compatible = "nxp,pca8574";
127		reg = <0x3a>;
128		gpio-controller;
129		#gpio-cells = <2>;
130	};
131};
132
133&pcie {
134	status = "okay";
135};
136
137&rgb_encoder {
138	status = "okay";
139};
140
141&rgb_panel {
142	compatible = "edt,etm0700g0bdh6";
143	status = "okay";
144};
145
146&ssi2 {
147	status = "okay";
148};
149
150&uart2 {
151	status = "okay";
152	uart-has-rtscts;
153};
154
155&uart3 {
156	status = "okay";
157};
158
159&uart4 {
160	status = "okay";
161};
162
163&uart5 {
164	status = "okay";
165};
166
167&usbh1 {
168	status = "okay";
169};
170
171&usbotg {
172	status = "okay";
173};
174
175&usdhc1 {
176	status = "okay";
177};