Loading...
1/*
2 * Copyright (C) 2013 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 * Based on "omap4.dtsi"
8 */
9
10#include <dt-bindings/bus/ti-sysc.h>
11#include <dt-bindings/clock/dra7.h>
12#include <dt-bindings/interrupt-controller/arm-gic.h>
13#include <dt-bindings/pinctrl/dra.h>
14#include <dt-bindings/clock/dra7.h>
15
16#define MAX_SOURCES 400
17
18/ {
19 #address-cells = <2>;
20 #size-cells = <2>;
21
22 compatible = "ti,dra7xx";
23 interrupt-parent = <&crossbar_mpu>;
24 chosen { };
25
26 aliases {
27 i2c0 = &i2c1;
28 i2c1 = &i2c2;
29 i2c2 = &i2c3;
30 i2c3 = &i2c4;
31 i2c4 = &i2c5;
32 serial0 = &uart1;
33 serial1 = &uart2;
34 serial2 = &uart3;
35 serial3 = &uart4;
36 serial4 = &uart5;
37 serial5 = &uart6;
38 serial6 = &uart7;
39 serial7 = &uart8;
40 serial8 = &uart9;
41 serial9 = &uart10;
42 ethernet0 = &cpsw_emac0;
43 ethernet1 = &cpsw_emac1;
44 d_can0 = &dcan1;
45 d_can1 = &dcan2;
46 spi0 = &qspi;
47 };
48
49 timer {
50 compatible = "arm,armv7-timer";
51 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
52 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
53 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
54 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
55 interrupt-parent = <&gic>;
56 };
57
58 gic: interrupt-controller@48211000 {
59 compatible = "arm,cortex-a15-gic";
60 interrupt-controller;
61 #interrupt-cells = <3>;
62 reg = <0x0 0x48211000 0x0 0x1000>,
63 <0x0 0x48212000 0x0 0x2000>,
64 <0x0 0x48214000 0x0 0x2000>,
65 <0x0 0x48216000 0x0 0x2000>;
66 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
67 interrupt-parent = <&gic>;
68 };
69
70 wakeupgen: interrupt-controller@48281000 {
71 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
72 interrupt-controller;
73 #interrupt-cells = <3>;
74 reg = <0x0 0x48281000 0x0 0x1000>;
75 interrupt-parent = <&gic>;
76 };
77
78 cpus {
79 #address-cells = <1>;
80 #size-cells = <0>;
81
82 cpu0: cpu@0 {
83 device_type = "cpu";
84 compatible = "arm,cortex-a15";
85 reg = <0>;
86
87 operating-points-v2 = <&cpu0_opp_table>;
88
89 clocks = <&dpll_mpu_ck>;
90 clock-names = "cpu";
91
92 clock-latency = <300000>; /* From omap-cpufreq driver */
93
94 /* cooling options */
95 #cooling-cells = <2>; /* min followed by max */
96
97 vbb-supply = <&abb_mpu>;
98 };
99 };
100
101 cpu0_opp_table: opp-table {
102 compatible = "operating-points-v2-ti-cpu";
103 syscon = <&scm_wkup>;
104
105 opp_nom-1000000000 {
106 opp-hz = /bits/ 64 <1000000000>;
107 opp-microvolt = <1060000 850000 1150000>,
108 <1060000 850000 1150000>;
109 opp-supported-hw = <0xFF 0x01>;
110 opp-suspend;
111 };
112
113 opp_od-1176000000 {
114 opp-hz = /bits/ 64 <1176000000>;
115 opp-microvolt = <1160000 885000 1160000>,
116 <1160000 885000 1160000>;
117
118 opp-supported-hw = <0xFF 0x02>;
119 };
120
121 opp_high@1500000000 {
122 opp-hz = /bits/ 64 <1500000000>;
123 opp-microvolt = <1210000 950000 1250000>,
124 <1210000 950000 1250000>;
125 opp-supported-hw = <0xFF 0x04>;
126 };
127 };
128
129 /*
130 * The soc node represents the soc top level view. It is used for IPs
131 * that are not memory mapped in the MPU view or for the MPU itself.
132 */
133 soc {
134 compatible = "ti,omap-infra";
135 mpu {
136 compatible = "ti,omap5-mpu";
137 ti,hwmods = "mpu";
138 };
139 };
140
141 /*
142 * XXX: Use a flat representation of the SOC interconnect.
143 * The real OMAP interconnect network is quite complex.
144 * Since it will not bring real advantage to represent that in DT for
145 * the moment, just use a fake OCP bus entry to represent the whole bus
146 * hierarchy.
147 */
148 ocp {
149 compatible = "ti,dra7-l3-noc", "simple-bus";
150 #address-cells = <1>;
151 #size-cells = <1>;
152 ranges = <0x0 0x0 0x0 0xc0000000>;
153 ti,hwmods = "l3_main_1", "l3_main_2";
154 reg = <0x0 0x44000000 0x0 0x1000000>,
155 <0x0 0x45000000 0x0 0x1000>;
156 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
157 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
158
159 l4_cfg: l4@4a000000 {
160 compatible = "ti,dra7-l4-cfg", "simple-bus";
161 #address-cells = <1>;
162 #size-cells = <1>;
163 ranges = <0 0x4a000000 0x22c000>;
164
165 scm: scm@2000 {
166 compatible = "ti,dra7-scm-core", "simple-bus";
167 reg = <0x2000 0x2000>;
168 #address-cells = <1>;
169 #size-cells = <1>;
170 ranges = <0 0x2000 0x2000>;
171
172 scm_conf: scm_conf@0 {
173 compatible = "syscon", "simple-bus";
174 reg = <0x0 0x1400>;
175 #address-cells = <1>;
176 #size-cells = <1>;
177 ranges = <0 0x0 0x1400>;
178
179 pbias_regulator: pbias_regulator@e00 {
180 compatible = "ti,pbias-dra7", "ti,pbias-omap";
181 reg = <0xe00 0x4>;
182 syscon = <&scm_conf>;
183 pbias_mmc_reg: pbias_mmc_omap5 {
184 regulator-name = "pbias_mmc_omap5";
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <3300000>;
187 };
188 };
189
190 scm_conf_clocks: clocks {
191 #address-cells = <1>;
192 #size-cells = <0>;
193 };
194 };
195
196 dra7_pmx_core: pinmux@1400 {
197 compatible = "ti,dra7-padconf",
198 "pinctrl-single";
199 reg = <0x1400 0x0468>;
200 #address-cells = <1>;
201 #size-cells = <0>;
202 #pinctrl-cells = <1>;
203 #interrupt-cells = <1>;
204 interrupt-controller;
205 pinctrl-single,register-width = <32>;
206 pinctrl-single,function-mask = <0x3fffffff>;
207 };
208
209 scm_conf1: scm_conf@1c04 {
210 compatible = "syscon";
211 reg = <0x1c04 0x0020>;
212 #syscon-cells = <2>;
213 };
214
215 scm_conf_pcie: scm_conf@1c24 {
216 compatible = "syscon";
217 reg = <0x1c24 0x0024>;
218 };
219
220 sdma_xbar: dma-router@b78 {
221 compatible = "ti,dra7-dma-crossbar";
222 reg = <0xb78 0xfc>;
223 #dma-cells = <1>;
224 dma-requests = <205>;
225 ti,dma-safe-map = <0>;
226 dma-masters = <&sdma>;
227 };
228
229 edma_xbar: dma-router@c78 {
230 compatible = "ti,dra7-dma-crossbar";
231 reg = <0xc78 0x7c>;
232 #dma-cells = <2>;
233 dma-requests = <204>;
234 ti,dma-safe-map = <0>;
235 dma-masters = <&edma>;
236 };
237 };
238
239 cm_core_aon: cm_core_aon@5000 {
240 compatible = "ti,dra7-cm-core-aon",
241 "simple-bus";
242 #address-cells = <1>;
243 #size-cells = <1>;
244 reg = <0x5000 0x2000>;
245 ranges = <0 0x5000 0x2000>;
246
247 cm_core_aon_clocks: clocks {
248 #address-cells = <1>;
249 #size-cells = <0>;
250 };
251
252 cm_core_aon_clockdomains: clockdomains {
253 };
254 };
255
256 cm_core: cm_core@8000 {
257 compatible = "ti,dra7-cm-core", "simple-bus";
258 #address-cells = <1>;
259 #size-cells = <1>;
260 reg = <0x8000 0x3000>;
261 ranges = <0 0x8000 0x3000>;
262
263 cm_core_clocks: clocks {
264 #address-cells = <1>;
265 #size-cells = <0>;
266 };
267
268 cm_core_clockdomains: clockdomains {
269 };
270 };
271 };
272
273 l4_wkup: l4@4ae00000 {
274 compatible = "ti,dra7-l4-wkup", "simple-bus";
275 #address-cells = <1>;
276 #size-cells = <1>;
277 ranges = <0 0x4ae00000 0x3f000>;
278
279 counter32k: counter@4000 {
280 compatible = "ti,omap-counter32k";
281 reg = <0x4000 0x40>;
282 ti,hwmods = "counter_32k";
283 };
284
285 prm: prm@6000 {
286 compatible = "ti,dra7-prm", "simple-bus";
287 reg = <0x6000 0x3000>;
288 interrupts = <GIC_SPI 6 IRQ_TYPE_LEVEL_HIGH>;
289 #address-cells = <1>;
290 #size-cells = <1>;
291 ranges = <0 0x6000 0x3000>;
292
293 prm_clocks: clocks {
294 #address-cells = <1>;
295 #size-cells = <0>;
296 };
297
298 prm_clockdomains: clockdomains {
299 };
300 };
301
302 scm_wkup: scm_conf@c000 {
303 compatible = "syscon";
304 reg = <0xc000 0x1000>;
305 };
306 };
307
308 axi@0 {
309 compatible = "simple-bus";
310 #size-cells = <1>;
311 #address-cells = <1>;
312 ranges = <0x51000000 0x51000000 0x3000
313 0x0 0x20000000 0x10000000>;
314 /**
315 * To enable PCI endpoint mode, disable the pcie1_rc
316 * node and enable pcie1_ep mode.
317 */
318 pcie1_rc: pcie@51000000 {
319 reg = <0x51000000 0x2000>, <0x51002000 0x14c>, <0x1000 0x2000>;
320 reg-names = "rc_dbics", "ti_conf", "config";
321 interrupts = <0 232 0x4>, <0 233 0x4>;
322 #address-cells = <3>;
323 #size-cells = <2>;
324 device_type = "pci";
325 ranges = <0x81000000 0 0 0x03000 0 0x00010000
326 0x82000000 0 0x20013000 0x13000 0 0xffed000>;
327 bus-range = <0x00 0xff>;
328 #interrupt-cells = <1>;
329 num-lanes = <1>;
330 linux,pci-domain = <0>;
331 ti,hwmods = "pcie1";
332 phys = <&pcie1_phy>;
333 phy-names = "pcie-phy0";
334 interrupt-map-mask = <0 0 0 7>;
335 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
336 <0 0 0 2 &pcie1_intc 2>,
337 <0 0 0 3 &pcie1_intc 3>,
338 <0 0 0 4 &pcie1_intc 4>;
339 status = "disabled";
340 pcie1_intc: interrupt-controller {
341 interrupt-controller;
342 #address-cells = <0>;
343 #interrupt-cells = <1>;
344 };
345 };
346
347 pcie1_ep: pcie_ep@51000000 {
348 reg = <0x51000000 0x28>, <0x51002000 0x14c>, <0x51001000 0x28>, <0x1000 0x10000000>;
349 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
350 interrupts = <0 232 0x4>;
351 num-lanes = <1>;
352 num-ib-windows = <4>;
353 num-ob-windows = <16>;
354 ti,hwmods = "pcie1";
355 phys = <&pcie1_phy>;
356 phy-names = "pcie-phy0";
357 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
358 status = "disabled";
359 };
360 };
361
362 axi@1 {
363 compatible = "simple-bus";
364 #size-cells = <1>;
365 #address-cells = <1>;
366 ranges = <0x51800000 0x51800000 0x3000
367 0x0 0x30000000 0x10000000>;
368 status = "disabled";
369 pcie2_rc: pcie@51800000 {
370 reg = <0x51800000 0x2000>, <0x51802000 0x14c>, <0x1000 0x2000>;
371 reg-names = "rc_dbics", "ti_conf", "config";
372 interrupts = <0 355 0x4>, <0 356 0x4>;
373 #address-cells = <3>;
374 #size-cells = <2>;
375 device_type = "pci";
376 ranges = <0x81000000 0 0 0x03000 0 0x00010000
377 0x82000000 0 0x30013000 0x13000 0 0xffed000>;
378 bus-range = <0x00 0xff>;
379 #interrupt-cells = <1>;
380 num-lanes = <1>;
381 linux,pci-domain = <1>;
382 ti,hwmods = "pcie2";
383 phys = <&pcie2_phy>;
384 phy-names = "pcie-phy0";
385 interrupt-map-mask = <0 0 0 7>;
386 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
387 <0 0 0 2 &pcie2_intc 2>,
388 <0 0 0 3 &pcie2_intc 3>,
389 <0 0 0 4 &pcie2_intc 4>;
390 pcie2_intc: interrupt-controller {
391 interrupt-controller;
392 #address-cells = <0>;
393 #interrupt-cells = <1>;
394 };
395 };
396 };
397
398 ocmcram1: ocmcram@40300000 {
399 compatible = "mmio-sram";
400 reg = <0x40300000 0x80000>;
401 ranges = <0x0 0x40300000 0x80000>;
402 #address-cells = <1>;
403 #size-cells = <1>;
404 /*
405 * This is a placeholder for an optional reserved
406 * region for use by secure software. The size
407 * of this region is not known until runtime so it
408 * is set as zero to either be updated to reserve
409 * space or left unchanged to leave all SRAM for use.
410 * On HS parts that that require the reserved region
411 * either the bootloader can update the size to
412 * the required amount or the node can be overridden
413 * from the board dts file for the secure platform.
414 */
415 sram-hs@0 {
416 compatible = "ti,secure-ram";
417 reg = <0x0 0x0>;
418 };
419 };
420
421 /*
422 * NOTE: ocmcram2 and ocmcram3 are not available on all
423 * DRA7xx and AM57xx variants. Confirm availability in
424 * the data manual for the exact part number in use
425 * before enabling these nodes in the board dts file.
426 */
427 ocmcram2: ocmcram@40400000 {
428 status = "disabled";
429 compatible = "mmio-sram";
430 reg = <0x40400000 0x100000>;
431 ranges = <0x0 0x40400000 0x100000>;
432 #address-cells = <1>;
433 #size-cells = <1>;
434 };
435
436 ocmcram3: ocmcram@40500000 {
437 status = "disabled";
438 compatible = "mmio-sram";
439 reg = <0x40500000 0x100000>;
440 ranges = <0x0 0x40500000 0x100000>;
441 #address-cells = <1>;
442 #size-cells = <1>;
443 };
444
445 bandgap: bandgap@4a0021e0 {
446 reg = <0x4a0021e0 0xc
447 0x4a00232c 0xc
448 0x4a002380 0x2c
449 0x4a0023C0 0x3c
450 0x4a002564 0x8
451 0x4a002574 0x50>;
452 compatible = "ti,dra752-bandgap";
453 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
454 #thermal-sensor-cells = <1>;
455 };
456
457 dsp1_system: dsp_system@40d00000 {
458 compatible = "syscon";
459 reg = <0x40d00000 0x100>;
460 };
461
462 dra7_iodelay_core: padconf@4844a000 {
463 compatible = "ti,dra7-iodelay";
464 reg = <0x4844a000 0x0d1c>;
465 #address-cells = <1>;
466 #size-cells = <0>;
467 #pinctrl-cells = <2>;
468 };
469
470 sdma: dma-controller@4a056000 {
471 compatible = "ti,omap4430-sdma";
472 reg = <0x4a056000 0x1000>;
473 interrupts = <GIC_SPI 7 IRQ_TYPE_LEVEL_HIGH>,
474 <GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
475 <GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
476 <GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
477 #dma-cells = <1>;
478 dma-channels = <32>;
479 dma-requests = <127>;
480 ti,hwmods = "dma_system";
481 };
482
483 edma: edma@43300000 {
484 compatible = "ti,edma3-tpcc";
485 ti,hwmods = "tpcc";
486 reg = <0x43300000 0x100000>;
487 reg-names = "edma3_cc";
488 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
489 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
490 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
491 interrupt-names = "edma3_ccint", "edma3_mperr",
492 "edma3_ccerrint";
493 dma-requests = <64>;
494 #dma-cells = <2>;
495
496 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
497
498 /*
499 * memcpy is disabled, can be enabled with:
500 * ti,edma-memcpy-channels = <20 21>;
501 * for example. Note that these channels need to be
502 * masked in the xbar as well.
503 */
504 };
505
506 edma_tptc0: tptc@43400000 {
507 compatible = "ti,edma3-tptc";
508 ti,hwmods = "tptc0";
509 reg = <0x43400000 0x100000>;
510 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
511 interrupt-names = "edma3_tcerrint";
512 };
513
514 edma_tptc1: tptc@43500000 {
515 compatible = "ti,edma3-tptc";
516 ti,hwmods = "tptc1";
517 reg = <0x43500000 0x100000>;
518 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
519 interrupt-names = "edma3_tcerrint";
520 };
521
522 gpio1: gpio@4ae10000 {
523 compatible = "ti,omap4-gpio";
524 reg = <0x4ae10000 0x200>;
525 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
526 ti,hwmods = "gpio1";
527 gpio-controller;
528 #gpio-cells = <2>;
529 interrupt-controller;
530 #interrupt-cells = <2>;
531 };
532
533 gpio2: gpio@48055000 {
534 compatible = "ti,omap4-gpio";
535 reg = <0x48055000 0x200>;
536 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
537 ti,hwmods = "gpio2";
538 gpio-controller;
539 #gpio-cells = <2>;
540 interrupt-controller;
541 #interrupt-cells = <2>;
542 };
543
544 gpio3: gpio@48057000 {
545 compatible = "ti,omap4-gpio";
546 reg = <0x48057000 0x200>;
547 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
548 ti,hwmods = "gpio3";
549 gpio-controller;
550 #gpio-cells = <2>;
551 interrupt-controller;
552 #interrupt-cells = <2>;
553 };
554
555 gpio4: gpio@48059000 {
556 compatible = "ti,omap4-gpio";
557 reg = <0x48059000 0x200>;
558 interrupts = <GIC_SPI 27 IRQ_TYPE_LEVEL_HIGH>;
559 ti,hwmods = "gpio4";
560 gpio-controller;
561 #gpio-cells = <2>;
562 interrupt-controller;
563 #interrupt-cells = <2>;
564 };
565
566 gpio5: gpio@4805b000 {
567 compatible = "ti,omap4-gpio";
568 reg = <0x4805b000 0x200>;
569 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
570 ti,hwmods = "gpio5";
571 gpio-controller;
572 #gpio-cells = <2>;
573 interrupt-controller;
574 #interrupt-cells = <2>;
575 };
576
577 gpio6: gpio@4805d000 {
578 compatible = "ti,omap4-gpio";
579 reg = <0x4805d000 0x200>;
580 interrupts = <GIC_SPI 29 IRQ_TYPE_LEVEL_HIGH>;
581 ti,hwmods = "gpio6";
582 gpio-controller;
583 #gpio-cells = <2>;
584 interrupt-controller;
585 #interrupt-cells = <2>;
586 };
587
588 gpio7: gpio@48051000 {
589 compatible = "ti,omap4-gpio";
590 reg = <0x48051000 0x200>;
591 interrupts = <GIC_SPI 30 IRQ_TYPE_LEVEL_HIGH>;
592 ti,hwmods = "gpio7";
593 gpio-controller;
594 #gpio-cells = <2>;
595 interrupt-controller;
596 #interrupt-cells = <2>;
597 };
598
599 gpio8: gpio@48053000 {
600 compatible = "ti,omap4-gpio";
601 reg = <0x48053000 0x200>;
602 interrupts = <GIC_SPI 116 IRQ_TYPE_LEVEL_HIGH>;
603 ti,hwmods = "gpio8";
604 gpio-controller;
605 #gpio-cells = <2>;
606 interrupt-controller;
607 #interrupt-cells = <2>;
608 };
609
610 uart1: serial@4806a000 {
611 compatible = "ti,dra742-uart", "ti,omap4-uart";
612 reg = <0x4806a000 0x100>;
613 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>;
614 ti,hwmods = "uart1";
615 clock-frequency = <48000000>;
616 status = "disabled";
617 dmas = <&sdma_xbar 49>, <&sdma_xbar 50>;
618 dma-names = "tx", "rx";
619 };
620
621 uart2: serial@4806c000 {
622 compatible = "ti,dra742-uart", "ti,omap4-uart";
623 reg = <0x4806c000 0x100>;
624 interrupts = <GIC_SPI 68 IRQ_TYPE_LEVEL_HIGH>;
625 ti,hwmods = "uart2";
626 clock-frequency = <48000000>;
627 status = "disabled";
628 dmas = <&sdma_xbar 51>, <&sdma_xbar 52>;
629 dma-names = "tx", "rx";
630 };
631
632 uart3: serial@48020000 {
633 compatible = "ti,dra742-uart", "ti,omap4-uart";
634 reg = <0x48020000 0x100>;
635 interrupts = <GIC_SPI 69 IRQ_TYPE_LEVEL_HIGH>;
636 ti,hwmods = "uart3";
637 clock-frequency = <48000000>;
638 status = "disabled";
639 dmas = <&sdma_xbar 53>, <&sdma_xbar 54>;
640 dma-names = "tx", "rx";
641 };
642
643 uart4: serial@4806e000 {
644 compatible = "ti,dra742-uart", "ti,omap4-uart";
645 reg = <0x4806e000 0x100>;
646 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
647 ti,hwmods = "uart4";
648 clock-frequency = <48000000>;
649 status = "disabled";
650 dmas = <&sdma_xbar 55>, <&sdma_xbar 56>;
651 dma-names = "tx", "rx";
652 };
653
654 uart5: serial@48066000 {
655 compatible = "ti,dra742-uart", "ti,omap4-uart";
656 reg = <0x48066000 0x100>;
657 interrupts = <GIC_SPI 100 IRQ_TYPE_LEVEL_HIGH>;
658 ti,hwmods = "uart5";
659 clock-frequency = <48000000>;
660 status = "disabled";
661 dmas = <&sdma_xbar 63>, <&sdma_xbar 64>;
662 dma-names = "tx", "rx";
663 };
664
665 uart6: serial@48068000 {
666 compatible = "ti,dra742-uart", "ti,omap4-uart";
667 reg = <0x48068000 0x100>;
668 interrupts = <GIC_SPI 101 IRQ_TYPE_LEVEL_HIGH>;
669 ti,hwmods = "uart6";
670 clock-frequency = <48000000>;
671 status = "disabled";
672 dmas = <&sdma_xbar 79>, <&sdma_xbar 80>;
673 dma-names = "tx", "rx";
674 };
675
676 uart7: serial@48420000 {
677 compatible = "ti,dra742-uart", "ti,omap4-uart";
678 reg = <0x48420000 0x100>;
679 interrupts = <GIC_SPI 218 IRQ_TYPE_LEVEL_HIGH>;
680 ti,hwmods = "uart7";
681 clock-frequency = <48000000>;
682 status = "disabled";
683 };
684
685 uart8: serial@48422000 {
686 compatible = "ti,dra742-uart", "ti,omap4-uart";
687 reg = <0x48422000 0x100>;
688 interrupts = <GIC_SPI 219 IRQ_TYPE_LEVEL_HIGH>;
689 ti,hwmods = "uart8";
690 clock-frequency = <48000000>;
691 status = "disabled";
692 };
693
694 uart9: serial@48424000 {
695 compatible = "ti,dra742-uart", "ti,omap4-uart";
696 reg = <0x48424000 0x100>;
697 interrupts = <GIC_SPI 220 IRQ_TYPE_LEVEL_HIGH>;
698 ti,hwmods = "uart9";
699 clock-frequency = <48000000>;
700 status = "disabled";
701 };
702
703 uart10: serial@4ae2b000 {
704 compatible = "ti,dra742-uart", "ti,omap4-uart";
705 reg = <0x4ae2b000 0x100>;
706 interrupts = <GIC_SPI 221 IRQ_TYPE_LEVEL_HIGH>;
707 ti,hwmods = "uart10";
708 clock-frequency = <48000000>;
709 status = "disabled";
710 };
711
712 mailbox1: mailbox@4a0f4000 {
713 compatible = "ti,omap4-mailbox";
714 reg = <0x4a0f4000 0x200>;
715 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>,
716 <GIC_SPI 135 IRQ_TYPE_LEVEL_HIGH>,
717 <GIC_SPI 134 IRQ_TYPE_LEVEL_HIGH>;
718 ti,hwmods = "mailbox1";
719 #mbox-cells = <1>;
720 ti,mbox-num-users = <3>;
721 ti,mbox-num-fifos = <8>;
722 status = "disabled";
723 };
724
725 mailbox2: mailbox@4883a000 {
726 compatible = "ti,omap4-mailbox";
727 reg = <0x4883a000 0x200>;
728 interrupts = <GIC_SPI 237 IRQ_TYPE_LEVEL_HIGH>,
729 <GIC_SPI 238 IRQ_TYPE_LEVEL_HIGH>,
730 <GIC_SPI 239 IRQ_TYPE_LEVEL_HIGH>,
731 <GIC_SPI 240 IRQ_TYPE_LEVEL_HIGH>;
732 ti,hwmods = "mailbox2";
733 #mbox-cells = <1>;
734 ti,mbox-num-users = <4>;
735 ti,mbox-num-fifos = <12>;
736 status = "disabled";
737 };
738
739 mailbox3: mailbox@4883c000 {
740 compatible = "ti,omap4-mailbox";
741 reg = <0x4883c000 0x200>;
742 interrupts = <GIC_SPI 241 IRQ_TYPE_LEVEL_HIGH>,
743 <GIC_SPI 242 IRQ_TYPE_LEVEL_HIGH>,
744 <GIC_SPI 243 IRQ_TYPE_LEVEL_HIGH>,
745 <GIC_SPI 244 IRQ_TYPE_LEVEL_HIGH>;
746 ti,hwmods = "mailbox3";
747 #mbox-cells = <1>;
748 ti,mbox-num-users = <4>;
749 ti,mbox-num-fifos = <12>;
750 status = "disabled";
751 };
752
753 mailbox4: mailbox@4883e000 {
754 compatible = "ti,omap4-mailbox";
755 reg = <0x4883e000 0x200>;
756 interrupts = <GIC_SPI 245 IRQ_TYPE_LEVEL_HIGH>,
757 <GIC_SPI 246 IRQ_TYPE_LEVEL_HIGH>,
758 <GIC_SPI 247 IRQ_TYPE_LEVEL_HIGH>,
759 <GIC_SPI 248 IRQ_TYPE_LEVEL_HIGH>;
760 ti,hwmods = "mailbox4";
761 #mbox-cells = <1>;
762 ti,mbox-num-users = <4>;
763 ti,mbox-num-fifos = <12>;
764 status = "disabled";
765 };
766
767 mailbox5: mailbox@48840000 {
768 compatible = "ti,omap4-mailbox";
769 reg = <0x48840000 0x200>;
770 interrupts = <GIC_SPI 249 IRQ_TYPE_LEVEL_HIGH>,
771 <GIC_SPI 250 IRQ_TYPE_LEVEL_HIGH>,
772 <GIC_SPI 251 IRQ_TYPE_LEVEL_HIGH>,
773 <GIC_SPI 252 IRQ_TYPE_LEVEL_HIGH>;
774 ti,hwmods = "mailbox5";
775 #mbox-cells = <1>;
776 ti,mbox-num-users = <4>;
777 ti,mbox-num-fifos = <12>;
778 status = "disabled";
779 };
780
781 mailbox6: mailbox@48842000 {
782 compatible = "ti,omap4-mailbox";
783 reg = <0x48842000 0x200>;
784 interrupts = <GIC_SPI 253 IRQ_TYPE_LEVEL_HIGH>,
785 <GIC_SPI 254 IRQ_TYPE_LEVEL_HIGH>,
786 <GIC_SPI 255 IRQ_TYPE_LEVEL_HIGH>,
787 <GIC_SPI 256 IRQ_TYPE_LEVEL_HIGH>;
788 ti,hwmods = "mailbox6";
789 #mbox-cells = <1>;
790 ti,mbox-num-users = <4>;
791 ti,mbox-num-fifos = <12>;
792 status = "disabled";
793 };
794
795 mailbox7: mailbox@48844000 {
796 compatible = "ti,omap4-mailbox";
797 reg = <0x48844000 0x200>;
798 interrupts = <GIC_SPI 257 IRQ_TYPE_LEVEL_HIGH>,
799 <GIC_SPI 258 IRQ_TYPE_LEVEL_HIGH>,
800 <GIC_SPI 259 IRQ_TYPE_LEVEL_HIGH>,
801 <GIC_SPI 260 IRQ_TYPE_LEVEL_HIGH>;
802 ti,hwmods = "mailbox7";
803 #mbox-cells = <1>;
804 ti,mbox-num-users = <4>;
805 ti,mbox-num-fifos = <12>;
806 status = "disabled";
807 };
808
809 mailbox8: mailbox@48846000 {
810 compatible = "ti,omap4-mailbox";
811 reg = <0x48846000 0x200>;
812 interrupts = <GIC_SPI 261 IRQ_TYPE_LEVEL_HIGH>,
813 <GIC_SPI 262 IRQ_TYPE_LEVEL_HIGH>,
814 <GIC_SPI 263 IRQ_TYPE_LEVEL_HIGH>,
815 <GIC_SPI 264 IRQ_TYPE_LEVEL_HIGH>;
816 ti,hwmods = "mailbox8";
817 #mbox-cells = <1>;
818 ti,mbox-num-users = <4>;
819 ti,mbox-num-fifos = <12>;
820 status = "disabled";
821 };
822
823 mailbox9: mailbox@4885e000 {
824 compatible = "ti,omap4-mailbox";
825 reg = <0x4885e000 0x200>;
826 interrupts = <GIC_SPI 265 IRQ_TYPE_LEVEL_HIGH>,
827 <GIC_SPI 266 IRQ_TYPE_LEVEL_HIGH>,
828 <GIC_SPI 267 IRQ_TYPE_LEVEL_HIGH>,
829 <GIC_SPI 268 IRQ_TYPE_LEVEL_HIGH>;
830 ti,hwmods = "mailbox9";
831 #mbox-cells = <1>;
832 ti,mbox-num-users = <4>;
833 ti,mbox-num-fifos = <12>;
834 status = "disabled";
835 };
836
837 mailbox10: mailbox@48860000 {
838 compatible = "ti,omap4-mailbox";
839 reg = <0x48860000 0x200>;
840 interrupts = <GIC_SPI 269 IRQ_TYPE_LEVEL_HIGH>,
841 <GIC_SPI 270 IRQ_TYPE_LEVEL_HIGH>,
842 <GIC_SPI 271 IRQ_TYPE_LEVEL_HIGH>,
843 <GIC_SPI 272 IRQ_TYPE_LEVEL_HIGH>;
844 ti,hwmods = "mailbox10";
845 #mbox-cells = <1>;
846 ti,mbox-num-users = <4>;
847 ti,mbox-num-fifos = <12>;
848 status = "disabled";
849 };
850
851 mailbox11: mailbox@48862000 {
852 compatible = "ti,omap4-mailbox";
853 reg = <0x48862000 0x200>;
854 interrupts = <GIC_SPI 273 IRQ_TYPE_LEVEL_HIGH>,
855 <GIC_SPI 274 IRQ_TYPE_LEVEL_HIGH>,
856 <GIC_SPI 275 IRQ_TYPE_LEVEL_HIGH>,
857 <GIC_SPI 276 IRQ_TYPE_LEVEL_HIGH>;
858 ti,hwmods = "mailbox11";
859 #mbox-cells = <1>;
860 ti,mbox-num-users = <4>;
861 ti,mbox-num-fifos = <12>;
862 status = "disabled";
863 };
864
865 mailbox12: mailbox@48864000 {
866 compatible = "ti,omap4-mailbox";
867 reg = <0x48864000 0x200>;
868 interrupts = <GIC_SPI 277 IRQ_TYPE_LEVEL_HIGH>,
869 <GIC_SPI 278 IRQ_TYPE_LEVEL_HIGH>,
870 <GIC_SPI 279 IRQ_TYPE_LEVEL_HIGH>,
871 <GIC_SPI 280 IRQ_TYPE_LEVEL_HIGH>;
872 ti,hwmods = "mailbox12";
873 #mbox-cells = <1>;
874 ti,mbox-num-users = <4>;
875 ti,mbox-num-fifos = <12>;
876 status = "disabled";
877 };
878
879 mailbox13: mailbox@48802000 {
880 compatible = "ti,omap4-mailbox";
881 reg = <0x48802000 0x200>;
882 interrupts = <GIC_SPI 379 IRQ_TYPE_LEVEL_HIGH>,
883 <GIC_SPI 380 IRQ_TYPE_LEVEL_HIGH>,
884 <GIC_SPI 381 IRQ_TYPE_LEVEL_HIGH>,
885 <GIC_SPI 382 IRQ_TYPE_LEVEL_HIGH>;
886 ti,hwmods = "mailbox13";
887 #mbox-cells = <1>;
888 ti,mbox-num-users = <4>;
889 ti,mbox-num-fifos = <12>;
890 status = "disabled";
891 };
892
893 timer1: timer@4ae18000 {
894 compatible = "ti,omap5430-timer";
895 reg = <0x4ae18000 0x80>;
896 interrupts = <GIC_SPI 32 IRQ_TYPE_LEVEL_HIGH>;
897 ti,hwmods = "timer1";
898 ti,timer-alwon;
899 clock-names = "fck";
900 clocks = <&wkupaon_clkctrl DRA7_TIMER1_CLKCTRL 24>;
901 };
902
903 timer2: timer@48032000 {
904 compatible = "ti,omap5430-timer";
905 reg = <0x48032000 0x80>;
906 interrupts = <GIC_SPI 33 IRQ_TYPE_LEVEL_HIGH>;
907 ti,hwmods = "timer2";
908 };
909
910 timer3: timer@48034000 {
911 compatible = "ti,omap5430-timer";
912 reg = <0x48034000 0x80>;
913 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
914 ti,hwmods = "timer3";
915 };
916
917 timer4: timer@48036000 {
918 compatible = "ti,omap5430-timer";
919 reg = <0x48036000 0x80>;
920 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
921 ti,hwmods = "timer4";
922 };
923
924 timer5: timer@48820000 {
925 compatible = "ti,omap5430-timer";
926 reg = <0x48820000 0x80>;
927 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
928 ti,hwmods = "timer5";
929 };
930
931 timer6: timer@48822000 {
932 compatible = "ti,omap5430-timer";
933 reg = <0x48822000 0x80>;
934 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
935 ti,hwmods = "timer6";
936 };
937
938 timer7: timer@48824000 {
939 compatible = "ti,omap5430-timer";
940 reg = <0x48824000 0x80>;
941 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
942 ti,hwmods = "timer7";
943 };
944
945 timer8: timer@48826000 {
946 compatible = "ti,omap5430-timer";
947 reg = <0x48826000 0x80>;
948 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
949 ti,hwmods = "timer8";
950 };
951
952 timer9: timer@4803e000 {
953 compatible = "ti,omap5430-timer";
954 reg = <0x4803e000 0x80>;
955 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
956 ti,hwmods = "timer9";
957 };
958
959 timer10: timer@48086000 {
960 compatible = "ti,omap5430-timer";
961 reg = <0x48086000 0x80>;
962 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
963 ti,hwmods = "timer10";
964 };
965
966 timer11: timer@48088000 {
967 compatible = "ti,omap5430-timer";
968 reg = <0x48088000 0x80>;
969 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
970 ti,hwmods = "timer11";
971 };
972
973 timer12: timer@4ae20000 {
974 compatible = "ti,omap5430-timer";
975 reg = <0x4ae20000 0x80>;
976 interrupts = <GIC_SPI 90 IRQ_TYPE_LEVEL_HIGH>;
977 ti,hwmods = "timer12";
978 ti,timer-alwon;
979 ti,timer-secure;
980 };
981
982 timer13: timer@48828000 {
983 compatible = "ti,omap5430-timer";
984 reg = <0x48828000 0x80>;
985 interrupts = <GIC_SPI 339 IRQ_TYPE_LEVEL_HIGH>;
986 ti,hwmods = "timer13";
987 };
988
989 timer14: timer@4882a000 {
990 compatible = "ti,omap5430-timer";
991 reg = <0x4882a000 0x80>;
992 interrupts = <GIC_SPI 340 IRQ_TYPE_LEVEL_HIGH>;
993 ti,hwmods = "timer14";
994 };
995
996 timer15: timer@4882c000 {
997 compatible = "ti,omap5430-timer";
998 reg = <0x4882c000 0x80>;
999 interrupts = <GIC_SPI 341 IRQ_TYPE_LEVEL_HIGH>;
1000 ti,hwmods = "timer15";
1001 };
1002
1003 timer16: timer@4882e000 {
1004 compatible = "ti,omap5430-timer";
1005 reg = <0x4882e000 0x80>;
1006 interrupts = <GIC_SPI 342 IRQ_TYPE_LEVEL_HIGH>;
1007 ti,hwmods = "timer16";
1008 };
1009
1010 wdt2: wdt@4ae14000 {
1011 compatible = "ti,omap3-wdt";
1012 reg = <0x4ae14000 0x80>;
1013 interrupts = <GIC_SPI 75 IRQ_TYPE_LEVEL_HIGH>;
1014 ti,hwmods = "wd_timer2";
1015 };
1016
1017 hwspinlock: spinlock@4a0f6000 {
1018 compatible = "ti,omap4-hwspinlock";
1019 reg = <0x4a0f6000 0x1000>;
1020 ti,hwmods = "spinlock";
1021 #hwlock-cells = <1>;
1022 };
1023
1024 dmm@4e000000 {
1025 compatible = "ti,omap5-dmm";
1026 reg = <0x4e000000 0x800>;
1027 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
1028 ti,hwmods = "dmm";
1029 };
1030
1031 i2c1: i2c@48070000 {
1032 compatible = "ti,omap4-i2c";
1033 reg = <0x48070000 0x100>;
1034 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
1035 #address-cells = <1>;
1036 #size-cells = <0>;
1037 ti,hwmods = "i2c1";
1038 status = "disabled";
1039 };
1040
1041 i2c2: i2c@48072000 {
1042 compatible = "ti,omap4-i2c";
1043 reg = <0x48072000 0x100>;
1044 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
1045 #address-cells = <1>;
1046 #size-cells = <0>;
1047 ti,hwmods = "i2c2";
1048 status = "disabled";
1049 };
1050
1051 i2c3: i2c@48060000 {
1052 compatible = "ti,omap4-i2c";
1053 reg = <0x48060000 0x100>;
1054 interrupts = <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
1055 #address-cells = <1>;
1056 #size-cells = <0>;
1057 ti,hwmods = "i2c3";
1058 status = "disabled";
1059 };
1060
1061 i2c4: i2c@4807a000 {
1062 compatible = "ti,omap4-i2c";
1063 reg = <0x4807a000 0x100>;
1064 interrupts = <GIC_SPI 57 IRQ_TYPE_LEVEL_HIGH>;
1065 #address-cells = <1>;
1066 #size-cells = <0>;
1067 ti,hwmods = "i2c4";
1068 status = "disabled";
1069 };
1070
1071 i2c5: i2c@4807c000 {
1072 compatible = "ti,omap4-i2c";
1073 reg = <0x4807c000 0x100>;
1074 interrupts = <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>;
1075 #address-cells = <1>;
1076 #size-cells = <0>;
1077 ti,hwmods = "i2c5";
1078 status = "disabled";
1079 };
1080
1081 mmc1: mmc@4809c000 {
1082 compatible = "ti,omap4-hsmmc";
1083 reg = <0x4809c000 0x400>;
1084 interrupts = <GIC_SPI 78 IRQ_TYPE_LEVEL_HIGH>;
1085 ti,hwmods = "mmc1";
1086 ti,dual-volt;
1087 ti,needs-special-reset;
1088 dmas = <&sdma_xbar 61>, <&sdma_xbar 62>;
1089 dma-names = "tx", "rx";
1090 status = "disabled";
1091 pbias-supply = <&pbias_mmc_reg>;
1092 max-frequency = <192000000>;
1093 };
1094
1095 hdqw1w: 1w@480b2000 {
1096 compatible = "ti,omap3-1w";
1097 reg = <0x480b2000 0x1000>;
1098 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>;
1099 ti,hwmods = "hdq1w";
1100 };
1101
1102 mmc2: mmc@480b4000 {
1103 compatible = "ti,omap4-hsmmc";
1104 reg = <0x480b4000 0x400>;
1105 interrupts = <GIC_SPI 81 IRQ_TYPE_LEVEL_HIGH>;
1106 ti,hwmods = "mmc2";
1107 ti,needs-special-reset;
1108 dmas = <&sdma_xbar 47>, <&sdma_xbar 48>;
1109 dma-names = "tx", "rx";
1110 status = "disabled";
1111 max-frequency = <192000000>;
1112 };
1113
1114 mmc3: mmc@480ad000 {
1115 compatible = "ti,omap4-hsmmc";
1116 reg = <0x480ad000 0x400>;
1117 interrupts = <GIC_SPI 89 IRQ_TYPE_LEVEL_HIGH>;
1118 ti,hwmods = "mmc3";
1119 ti,needs-special-reset;
1120 dmas = <&sdma_xbar 77>, <&sdma_xbar 78>;
1121 dma-names = "tx", "rx";
1122 status = "disabled";
1123 /* Errata i887 limits max-frequency of MMC3 to 64 MHz */
1124 max-frequency = <64000000>;
1125 };
1126
1127 mmc4: mmc@480d1000 {
1128 compatible = "ti,omap4-hsmmc";
1129 reg = <0x480d1000 0x400>;
1130 interrupts = <GIC_SPI 91 IRQ_TYPE_LEVEL_HIGH>;
1131 ti,hwmods = "mmc4";
1132 ti,needs-special-reset;
1133 dmas = <&sdma_xbar 57>, <&sdma_xbar 58>;
1134 dma-names = "tx", "rx";
1135 status = "disabled";
1136 max-frequency = <192000000>;
1137 };
1138
1139 mmu0_dsp1: mmu@40d01000 {
1140 compatible = "ti,dra7-dsp-iommu";
1141 reg = <0x40d01000 0x100>;
1142 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
1143 ti,hwmods = "mmu0_dsp1";
1144 #iommu-cells = <0>;
1145 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
1146 status = "disabled";
1147 };
1148
1149 mmu1_dsp1: mmu@40d02000 {
1150 compatible = "ti,dra7-dsp-iommu";
1151 reg = <0x40d02000 0x100>;
1152 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
1153 ti,hwmods = "mmu1_dsp1";
1154 #iommu-cells = <0>;
1155 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
1156 status = "disabled";
1157 };
1158
1159 mmu_ipu1: mmu@58882000 {
1160 compatible = "ti,dra7-iommu";
1161 reg = <0x58882000 0x100>;
1162 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
1163 ti,hwmods = "mmu_ipu1";
1164 #iommu-cells = <0>;
1165 ti,iommu-bus-err-back;
1166 status = "disabled";
1167 };
1168
1169 mmu_ipu2: mmu@55082000 {
1170 compatible = "ti,dra7-iommu";
1171 reg = <0x55082000 0x100>;
1172 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
1173 ti,hwmods = "mmu_ipu2";
1174 #iommu-cells = <0>;
1175 ti,iommu-bus-err-back;
1176 status = "disabled";
1177 };
1178
1179 abb_mpu: regulator-abb-mpu {
1180 compatible = "ti,abb-v3";
1181 regulator-name = "abb_mpu";
1182 #address-cells = <0>;
1183 #size-cells = <0>;
1184 clocks = <&sys_clkin1>;
1185 ti,settling-time = <50>;
1186 ti,clock-cycles = <16>;
1187
1188 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
1189 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
1190 <0x4ae0c158 0x4>;
1191 reg-names = "setup-address", "control-address",
1192 "int-address", "efuse-address",
1193 "ldo-address";
1194 ti,tranxdone-status-mask = <0x80>;
1195 /* LDOVBBMPU_FBB_MUX_CTRL */
1196 ti,ldovbb-override-mask = <0x400>;
1197 /* LDOVBBMPU_FBB_VSET_OUT */
1198 ti,ldovbb-vset-mask = <0x1F>;
1199
1200 /*
1201 * NOTE: only FBB mode used but actual vset will
1202 * determine final biasing
1203 */
1204 ti,abb_info = <
1205 /*uV ABB efuse rbb_m fbb_m vset_m*/
1206 1060000 0 0x0 0 0x02000000 0x01F00000
1207 1160000 0 0x4 0 0x02000000 0x01F00000
1208 1210000 0 0x8 0 0x02000000 0x01F00000
1209 >;
1210 };
1211
1212 abb_ivahd: regulator-abb-ivahd {
1213 compatible = "ti,abb-v3";
1214 regulator-name = "abb_ivahd";
1215 #address-cells = <0>;
1216 #size-cells = <0>;
1217 clocks = <&sys_clkin1>;
1218 ti,settling-time = <50>;
1219 ti,clock-cycles = <16>;
1220
1221 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
1222 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
1223 <0x4a002470 0x4>;
1224 reg-names = "setup-address", "control-address",
1225 "int-address", "efuse-address",
1226 "ldo-address";
1227 ti,tranxdone-status-mask = <0x40000000>;
1228 /* LDOVBBIVA_FBB_MUX_CTRL */
1229 ti,ldovbb-override-mask = <0x400>;
1230 /* LDOVBBIVA_FBB_VSET_OUT */
1231 ti,ldovbb-vset-mask = <0x1F>;
1232
1233 /*
1234 * NOTE: only FBB mode used but actual vset will
1235 * determine final biasing
1236 */
1237 ti,abb_info = <
1238 /*uV ABB efuse rbb_m fbb_m vset_m*/
1239 1055000 0 0x0 0 0x02000000 0x01F00000
1240 1150000 0 0x4 0 0x02000000 0x01F00000
1241 1250000 0 0x8 0 0x02000000 0x01F00000
1242 >;
1243 };
1244
1245 abb_dspeve: regulator-abb-dspeve {
1246 compatible = "ti,abb-v3";
1247 regulator-name = "abb_dspeve";
1248 #address-cells = <0>;
1249 #size-cells = <0>;
1250 clocks = <&sys_clkin1>;
1251 ti,settling-time = <50>;
1252 ti,clock-cycles = <16>;
1253
1254 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
1255 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
1256 <0x4a00246c 0x4>;
1257 reg-names = "setup-address", "control-address",
1258 "int-address", "efuse-address",
1259 "ldo-address";
1260 ti,tranxdone-status-mask = <0x20000000>;
1261 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
1262 ti,ldovbb-override-mask = <0x400>;
1263 /* LDOVBBDSPEVE_FBB_VSET_OUT */
1264 ti,ldovbb-vset-mask = <0x1F>;
1265
1266 /*
1267 * NOTE: only FBB mode used but actual vset will
1268 * determine final biasing
1269 */
1270 ti,abb_info = <
1271 /*uV ABB efuse rbb_m fbb_m vset_m*/
1272 1055000 0 0x0 0 0x02000000 0x01F00000
1273 1150000 0 0x4 0 0x02000000 0x01F00000
1274 1250000 0 0x8 0 0x02000000 0x01F00000
1275 >;
1276 };
1277
1278 abb_gpu: regulator-abb-gpu {
1279 compatible = "ti,abb-v3";
1280 regulator-name = "abb_gpu";
1281 #address-cells = <0>;
1282 #size-cells = <0>;
1283 clocks = <&sys_clkin1>;
1284 ti,settling-time = <50>;
1285 ti,clock-cycles = <16>;
1286
1287 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
1288 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
1289 <0x4ae0c154 0x4>;
1290 reg-names = "setup-address", "control-address",
1291 "int-address", "efuse-address",
1292 "ldo-address";
1293 ti,tranxdone-status-mask = <0x10000000>;
1294 /* LDOVBBGPU_FBB_MUX_CTRL */
1295 ti,ldovbb-override-mask = <0x400>;
1296 /* LDOVBBGPU_FBB_VSET_OUT */
1297 ti,ldovbb-vset-mask = <0x1F>;
1298
1299 /*
1300 * NOTE: only FBB mode used but actual vset will
1301 * determine final biasing
1302 */
1303 ti,abb_info = <
1304 /*uV ABB efuse rbb_m fbb_m vset_m*/
1305 1090000 0 0x0 0 0x02000000 0x01F00000
1306 1210000 0 0x4 0 0x02000000 0x01F00000
1307 1280000 0 0x8 0 0x02000000 0x01F00000
1308 >;
1309 };
1310
1311 mcspi1: spi@48098000 {
1312 compatible = "ti,omap4-mcspi";
1313 reg = <0x48098000 0x200>;
1314 interrupts = <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>;
1315 #address-cells = <1>;
1316 #size-cells = <0>;
1317 ti,hwmods = "mcspi1";
1318 ti,spi-num-cs = <4>;
1319 dmas = <&sdma_xbar 35>,
1320 <&sdma_xbar 36>,
1321 <&sdma_xbar 37>,
1322 <&sdma_xbar 38>,
1323 <&sdma_xbar 39>,
1324 <&sdma_xbar 40>,
1325 <&sdma_xbar 41>,
1326 <&sdma_xbar 42>;
1327 dma-names = "tx0", "rx0", "tx1", "rx1",
1328 "tx2", "rx2", "tx3", "rx3";
1329 status = "disabled";
1330 };
1331
1332 mcspi2: spi@4809a000 {
1333 compatible = "ti,omap4-mcspi";
1334 reg = <0x4809a000 0x200>;
1335 interrupts = <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
1336 #address-cells = <1>;
1337 #size-cells = <0>;
1338 ti,hwmods = "mcspi2";
1339 ti,spi-num-cs = <2>;
1340 dmas = <&sdma_xbar 43>,
1341 <&sdma_xbar 44>,
1342 <&sdma_xbar 45>,
1343 <&sdma_xbar 46>;
1344 dma-names = "tx0", "rx0", "tx1", "rx1";
1345 status = "disabled";
1346 };
1347
1348 mcspi3: spi@480b8000 {
1349 compatible = "ti,omap4-mcspi";
1350 reg = <0x480b8000 0x200>;
1351 interrupts = <GIC_SPI 86 IRQ_TYPE_LEVEL_HIGH>;
1352 #address-cells = <1>;
1353 #size-cells = <0>;
1354 ti,hwmods = "mcspi3";
1355 ti,spi-num-cs = <2>;
1356 dmas = <&sdma_xbar 15>, <&sdma_xbar 16>;
1357 dma-names = "tx0", "rx0";
1358 status = "disabled";
1359 };
1360
1361 mcspi4: spi@480ba000 {
1362 compatible = "ti,omap4-mcspi";
1363 reg = <0x480ba000 0x200>;
1364 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
1365 #address-cells = <1>;
1366 #size-cells = <0>;
1367 ti,hwmods = "mcspi4";
1368 ti,spi-num-cs = <1>;
1369 dmas = <&sdma_xbar 70>, <&sdma_xbar 71>;
1370 dma-names = "tx0", "rx0";
1371 status = "disabled";
1372 };
1373
1374 qspi: qspi@4b300000 {
1375 compatible = "ti,dra7xxx-qspi";
1376 reg = <0x4b300000 0x100>,
1377 <0x5c000000 0x4000000>;
1378 reg-names = "qspi_base", "qspi_mmap";
1379 syscon-chipselects = <&scm_conf 0x558>;
1380 #address-cells = <1>;
1381 #size-cells = <0>;
1382 ti,hwmods = "qspi";
1383 clocks = <&l4per_clkctrl DRA7_QSPI_CLKCTRL 25>;
1384 clock-names = "fck";
1385 num-cs = <4>;
1386 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
1387 status = "disabled";
1388 };
1389
1390 /* OCP2SCP3 */
1391 ocp2scp@4a090000 {
1392 compatible = "ti,omap-ocp2scp";
1393 #address-cells = <1>;
1394 #size-cells = <1>;
1395 ranges;
1396 reg = <0x4a090000 0x20>;
1397 ti,hwmods = "ocp2scp3";
1398 sata_phy: phy@4a096000 {
1399 compatible = "ti,phy-pipe3-sata";
1400 reg = <0x4A096000 0x80>, /* phy_rx */
1401 <0x4A096400 0x64>, /* phy_tx */
1402 <0x4A096800 0x40>; /* pll_ctrl */
1403 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1404 syscon-phy-power = <&scm_conf 0x374>;
1405 clocks = <&sys_clkin1>,
1406 <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
1407 clock-names = "sysclk", "refclk";
1408 syscon-pllreset = <&scm_conf 0x3fc>;
1409 #phy-cells = <0>;
1410 };
1411
1412 pcie1_phy: pciephy@4a094000 {
1413 compatible = "ti,phy-pipe3-pcie";
1414 reg = <0x4a094000 0x80>, /* phy_rx */
1415 <0x4a094400 0x64>; /* phy_tx */
1416 reg-names = "phy_rx", "phy_tx";
1417 syscon-phy-power = <&scm_conf_pcie 0x1c>;
1418 syscon-pcs = <&scm_conf_pcie 0x10>;
1419 clocks = <&dpll_pcie_ref_ck>,
1420 <&dpll_pcie_ref_m2ldo_ck>,
1421 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 8>,
1422 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 9>,
1423 <&l3init_clkctrl DRA7_PCIE1_CLKCTRL 10>,
1424 <&optfclk_pciephy_div>,
1425 <&sys_clkin1>;
1426 clock-names = "dpll_ref", "dpll_ref_m2",
1427 "wkupclk", "refclk",
1428 "div-clk", "phy-div", "sysclk";
1429 #phy-cells = <0>;
1430 };
1431
1432 pcie2_phy: pciephy@4a095000 {
1433 compatible = "ti,phy-pipe3-pcie";
1434 reg = <0x4a095000 0x80>, /* phy_rx */
1435 <0x4a095400 0x64>; /* phy_tx */
1436 reg-names = "phy_rx", "phy_tx";
1437 syscon-phy-power = <&scm_conf_pcie 0x20>;
1438 syscon-pcs = <&scm_conf_pcie 0x10>;
1439 clocks = <&dpll_pcie_ref_ck>,
1440 <&dpll_pcie_ref_m2ldo_ck>,
1441 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 8>,
1442 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 9>,
1443 <&l3init_clkctrl DRA7_PCIE2_CLKCTRL 10>,
1444 <&optfclk_pciephy_div>,
1445 <&sys_clkin1>;
1446 clock-names = "dpll_ref", "dpll_ref_m2",
1447 "wkupclk", "refclk",
1448 "div-clk", "phy-div", "sysclk";
1449 #phy-cells = <0>;
1450 status = "disabled";
1451 };
1452 };
1453
1454 sata: sata@4a141100 {
1455 compatible = "snps,dwc-ahci";
1456 reg = <0x4a140000 0x1100>, <0x4a141100 0x7>;
1457 interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
1458 phys = <&sata_phy>;
1459 phy-names = "sata-phy";
1460 clocks = <&l3init_clkctrl DRA7_SATA_CLKCTRL 8>;
1461 ti,hwmods = "sata";
1462 ports-implemented = <0x1>;
1463 };
1464
1465 rtc: rtc@48838000 {
1466 compatible = "ti,am3352-rtc";
1467 reg = <0x48838000 0x100>;
1468 interrupts = <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>,
1469 <GIC_SPI 217 IRQ_TYPE_LEVEL_HIGH>;
1470 ti,hwmods = "rtcss";
1471 clocks = <&sys_32k_ck>;
1472 };
1473
1474 /* OCP2SCP1 */
1475 ocp2scp@4a080000 {
1476 compatible = "ti,omap-ocp2scp";
1477 #address-cells = <1>;
1478 #size-cells = <1>;
1479 ranges;
1480 reg = <0x4a080000 0x20>;
1481 ti,hwmods = "ocp2scp1";
1482
1483 usb2_phy1: phy@4a084000 {
1484 compatible = "ti,dra7x-usb2", "ti,omap-usb2";
1485 reg = <0x4a084000 0x400>;
1486 syscon-phy-power = <&scm_conf 0x300>;
1487 clocks = <&usb_phy1_always_on_clk32k>,
1488 <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
1489 clock-names = "wkupclk",
1490 "refclk";
1491 #phy-cells = <0>;
1492 };
1493
1494 usb2_phy2: phy@4a085000 {
1495 compatible = "ti,dra7x-usb2-phy2",
1496 "ti,omap-usb2";
1497 reg = <0x4a085000 0x400>;
1498 syscon-phy-power = <&scm_conf 0xe74>;
1499 clocks = <&usb_phy2_always_on_clk32k>,
1500 <&l3init_clkctrl DRA7_USB_OTG_SS2_CLKCTRL 8>;
1501 clock-names = "wkupclk",
1502 "refclk";
1503 #phy-cells = <0>;
1504 };
1505
1506 usb3_phy1: phy@4a084400 {
1507 compatible = "ti,omap-usb3";
1508 reg = <0x4a084400 0x80>,
1509 <0x4a084800 0x64>,
1510 <0x4a084c00 0x40>;
1511 reg-names = "phy_rx", "phy_tx", "pll_ctrl";
1512 syscon-phy-power = <&scm_conf 0x370>;
1513 clocks = <&usb_phy3_always_on_clk32k>,
1514 <&sys_clkin1>,
1515 <&l3init_clkctrl DRA7_USB_OTG_SS1_CLKCTRL 8>;
1516 clock-names = "wkupclk",
1517 "sysclk",
1518 "refclk";
1519 #phy-cells = <0>;
1520 };
1521 };
1522
1523 target-module@4a0dd000 {
1524 compatible = "ti,sysc-omap4-sr", "ti,sysc";
1525 ti,hwmods = "smartreflex_core";
1526 reg = <0x4a0dd038 0x4>;
1527 reg-names = "sysc";
1528 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
1529 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1530 <SYSC_IDLE_NO>,
1531 <SYSC_IDLE_SMART>,
1532 <SYSC_IDLE_SMART_WKUP>;
1533 clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_CORE_CLKCTRL 0>;
1534 clock-names = "fck";
1535 #address-cells = <1>;
1536 #size-cells = <1>;
1537 ranges = <0 0x4a0dd000 0x001000>;
1538
1539 /* SmartReflex child device marked reserved in TRM */
1540 };
1541
1542 target-module@4a0d9000 {
1543 compatible = "ti,sysc-omap4-sr", "ti,sysc";
1544 ti,hwmods = "smartreflex_mpu";
1545 reg = <0x4a0d9038 0x4>;
1546 reg-names = "sysc";
1547 ti,sysc-mask = <SYSC_OMAP3_SR_ENAWAKEUP>;
1548 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1549 <SYSC_IDLE_NO>,
1550 <SYSC_IDLE_SMART>,
1551 <SYSC_IDLE_SMART_WKUP>;
1552 clocks = <&coreaon_clkctrl DRA7_SMARTREFLEX_MPU_CLKCTRL 0>;
1553 clock-names = "fck";
1554 #address-cells = <1>;
1555 #size-cells = <1>;
1556 ranges = <0 0x4a0d9000 0x001000>;
1557
1558 /* SmartReflex child device marked reserved in TRM */
1559 };
1560
1561 omap_dwc3_1: omap_dwc3_1@48880000 {
1562 compatible = "ti,dwc3";
1563 ti,hwmods = "usb_otg_ss1";
1564 reg = <0x48880000 0x10000>;
1565 interrupts = <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1566 #address-cells = <1>;
1567 #size-cells = <1>;
1568 utmi-mode = <2>;
1569 ranges;
1570 usb1: usb@48890000 {
1571 compatible = "snps,dwc3";
1572 reg = <0x48890000 0x17000>;
1573 interrupts = <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1574 <GIC_SPI 71 IRQ_TYPE_LEVEL_HIGH>,
1575 <GIC_SPI 72 IRQ_TYPE_LEVEL_HIGH>;
1576 interrupt-names = "peripheral",
1577 "host",
1578 "otg";
1579 phys = <&usb2_phy1>, <&usb3_phy1>;
1580 phy-names = "usb2-phy", "usb3-phy";
1581 maximum-speed = "super-speed";
1582 dr_mode = "otg";
1583 snps,dis_u3_susphy_quirk;
1584 snps,dis_u2_susphy_quirk;
1585 snps,dis_metastability_quirk;
1586 };
1587 };
1588
1589 omap_dwc3_2: omap_dwc3_2@488c0000 {
1590 compatible = "ti,dwc3";
1591 ti,hwmods = "usb_otg_ss2";
1592 reg = <0x488c0000 0x10000>;
1593 interrupts = <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1594 #address-cells = <1>;
1595 #size-cells = <1>;
1596 utmi-mode = <2>;
1597 ranges;
1598 usb2: usb@488d0000 {
1599 compatible = "snps,dwc3";
1600 reg = <0x488d0000 0x17000>;
1601 interrupts = <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1602 <GIC_SPI 73 IRQ_TYPE_LEVEL_HIGH>,
1603 <GIC_SPI 87 IRQ_TYPE_LEVEL_HIGH>;
1604 interrupt-names = "peripheral",
1605 "host",
1606 "otg";
1607 phys = <&usb2_phy2>;
1608 phy-names = "usb2-phy";
1609 maximum-speed = "high-speed";
1610 dr_mode = "otg";
1611 snps,dis_u3_susphy_quirk;
1612 snps,dis_u2_susphy_quirk;
1613 };
1614 };
1615
1616 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
1617 omap_dwc3_3: omap_dwc3_3@48900000 {
1618 compatible = "ti,dwc3";
1619 ti,hwmods = "usb_otg_ss3";
1620 reg = <0x48900000 0x10000>;
1621 interrupts = <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1622 #address-cells = <1>;
1623 #size-cells = <1>;
1624 utmi-mode = <2>;
1625 ranges;
1626 status = "disabled";
1627 usb3: usb@48910000 {
1628 compatible = "snps,dwc3";
1629 reg = <0x48910000 0x17000>;
1630 interrupts = <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1631 <GIC_SPI 88 IRQ_TYPE_LEVEL_HIGH>,
1632 <GIC_SPI 344 IRQ_TYPE_LEVEL_HIGH>;
1633 interrupt-names = "peripheral",
1634 "host",
1635 "otg";
1636 maximum-speed = "high-speed";
1637 dr_mode = "otg";
1638 snps,dis_u3_susphy_quirk;
1639 snps,dis_u2_susphy_quirk;
1640 };
1641 };
1642
1643 elm: elm@48078000 {
1644 compatible = "ti,am3352-elm";
1645 reg = <0x48078000 0xfc0>; /* device IO registers */
1646 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
1647 ti,hwmods = "elm";
1648 status = "disabled";
1649 };
1650
1651 gpmc: gpmc@50000000 {
1652 compatible = "ti,am3352-gpmc";
1653 ti,hwmods = "gpmc";
1654 reg = <0x50000000 0x37c>; /* device IO registers */
1655 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
1656 dmas = <&edma_xbar 4 0>;
1657 dma-names = "rxtx";
1658 gpmc,num-cs = <8>;
1659 gpmc,num-waitpins = <2>;
1660 #address-cells = <2>;
1661 #size-cells = <1>;
1662 interrupt-controller;
1663 #interrupt-cells = <2>;
1664 gpio-controller;
1665 #gpio-cells = <2>;
1666 status = "disabled";
1667 };
1668
1669 atl: atl@4843c000 {
1670 compatible = "ti,dra7-atl";
1671 reg = <0x4843c000 0x3ff>;
1672 ti,hwmods = "atl";
1673 ti,provided-clocks = <&atl_clkin0_ck>, <&atl_clkin1_ck>,
1674 <&atl_clkin2_ck>, <&atl_clkin3_ck>;
1675 clocks = <&atl_clkctrl DRA7_ATL_CLKCTRL 26>;
1676 clock-names = "fck";
1677 status = "disabled";
1678 };
1679
1680 mcasp1: mcasp@48460000 {
1681 compatible = "ti,dra7-mcasp-audio";
1682 ti,hwmods = "mcasp1";
1683 reg = <0x48460000 0x2000>,
1684 <0x45800000 0x1000>;
1685 reg-names = "mpu","dat";
1686 interrupts = <GIC_SPI 104 IRQ_TYPE_LEVEL_HIGH>,
1687 <GIC_SPI 103 IRQ_TYPE_LEVEL_HIGH>;
1688 interrupt-names = "tx", "rx";
1689 dmas = <&edma_xbar 129 1>, <&edma_xbar 128 1>;
1690 dma-names = "tx", "rx";
1691 clocks = <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 22>, <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 24>,
1692 <&ipu_clkctrl DRA7_MCASP1_CLKCTRL 28>;
1693 clock-names = "fck", "ahclkx", "ahclkr";
1694 status = "disabled";
1695 };
1696
1697 mcasp2: mcasp@48464000 {
1698 compatible = "ti,dra7-mcasp-audio";
1699 ti,hwmods = "mcasp2";
1700 reg = <0x48464000 0x2000>,
1701 <0x45c00000 0x1000>;
1702 reg-names = "mpu","dat";
1703 interrupts = <GIC_SPI 149 IRQ_TYPE_LEVEL_HIGH>,
1704 <GIC_SPI 148 IRQ_TYPE_LEVEL_HIGH>;
1705 interrupt-names = "tx", "rx";
1706 dmas = <&edma_xbar 131 1>, <&edma_xbar 130 1>;
1707 dma-names = "tx", "rx";
1708 clocks = <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 22>,
1709 <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 24>,
1710 <&l4per_clkctrl DRA7_MCASP2_CLKCTRL 28>;
1711 clock-names = "fck", "ahclkx", "ahclkr";
1712 status = "disabled";
1713 };
1714
1715 mcasp3: mcasp@48468000 {
1716 compatible = "ti,dra7-mcasp-audio";
1717 ti,hwmods = "mcasp3";
1718 reg = <0x48468000 0x2000>,
1719 <0x46000000 0x1000>;
1720 reg-names = "mpu","dat";
1721 interrupts = <GIC_SPI 151 IRQ_TYPE_LEVEL_HIGH>,
1722 <GIC_SPI 150 IRQ_TYPE_LEVEL_HIGH>;
1723 interrupt-names = "tx", "rx";
1724 dmas = <&edma_xbar 133 1>, <&edma_xbar 132 1>;
1725 dma-names = "tx", "rx";
1726 clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 22>,
1727 <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
1728 clock-names = "fck", "ahclkx";
1729 status = "disabled";
1730 };
1731
1732 mcasp4: mcasp@4846c000 {
1733 compatible = "ti,dra7-mcasp-audio";
1734 ti,hwmods = "mcasp4";
1735 reg = <0x4846c000 0x2000>,
1736 <0x48436000 0x1000>;
1737 reg-names = "mpu","dat";
1738 interrupts = <GIC_SPI 153 IRQ_TYPE_LEVEL_HIGH>,
1739 <GIC_SPI 152 IRQ_TYPE_LEVEL_HIGH>;
1740 interrupt-names = "tx", "rx";
1741 dmas = <&edma_xbar 135 1>, <&edma_xbar 134 1>;
1742 dma-names = "tx", "rx";
1743 clocks = <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 22>,
1744 <&l4per_clkctrl DRA7_MCASP4_CLKCTRL 24>;
1745 clock-names = "fck", "ahclkx";
1746 status = "disabled";
1747 };
1748
1749 mcasp5: mcasp@48470000 {
1750 compatible = "ti,dra7-mcasp-audio";
1751 ti,hwmods = "mcasp5";
1752 reg = <0x48470000 0x2000>,
1753 <0x4843a000 0x1000>;
1754 reg-names = "mpu","dat";
1755 interrupts = <GIC_SPI 155 IRQ_TYPE_LEVEL_HIGH>,
1756 <GIC_SPI 154 IRQ_TYPE_LEVEL_HIGH>;
1757 interrupt-names = "tx", "rx";
1758 dmas = <&edma_xbar 137 1>, <&edma_xbar 136 1>;
1759 dma-names = "tx", "rx";
1760 clocks = <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 22>,
1761 <&l4per_clkctrl DRA7_MCASP5_CLKCTRL 24>;
1762 clock-names = "fck", "ahclkx";
1763 status = "disabled";
1764 };
1765
1766 mcasp6: mcasp@48474000 {
1767 compatible = "ti,dra7-mcasp-audio";
1768 ti,hwmods = "mcasp6";
1769 reg = <0x48474000 0x2000>,
1770 <0x4844c000 0x1000>;
1771 reg-names = "mpu","dat";
1772 interrupts = <GIC_SPI 157 IRQ_TYPE_LEVEL_HIGH>,
1773 <GIC_SPI 156 IRQ_TYPE_LEVEL_HIGH>;
1774 interrupt-names = "tx", "rx";
1775 dmas = <&edma_xbar 139 1>, <&edma_xbar 138 1>;
1776 dma-names = "tx", "rx";
1777 clocks = <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 22>,
1778 <&l4per_clkctrl DRA7_MCASP6_CLKCTRL 24>;
1779 clock-names = "fck", "ahclkx";
1780 status = "disabled";
1781 };
1782
1783 mcasp7: mcasp@48478000 {
1784 compatible = "ti,dra7-mcasp-audio";
1785 ti,hwmods = "mcasp7";
1786 reg = <0x48478000 0x2000>,
1787 <0x48450000 0x1000>;
1788 reg-names = "mpu","dat";
1789 interrupts = <GIC_SPI 159 IRQ_TYPE_LEVEL_HIGH>,
1790 <GIC_SPI 158 IRQ_TYPE_LEVEL_HIGH>;
1791 interrupt-names = "tx", "rx";
1792 dmas = <&edma_xbar 141 1>, <&edma_xbar 140 1>;
1793 dma-names = "tx", "rx";
1794 clocks = <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 22>,
1795 <&l4per_clkctrl DRA7_MCASP7_CLKCTRL 24>;
1796 clock-names = "fck", "ahclkx";
1797 status = "disabled";
1798 };
1799
1800 mcasp8: mcasp@4847c000 {
1801 compatible = "ti,dra7-mcasp-audio";
1802 ti,hwmods = "mcasp8";
1803 reg = <0x4847c000 0x2000>,
1804 <0x48454000 0x1000>;
1805 reg-names = "mpu","dat";
1806 interrupts = <GIC_SPI 161 IRQ_TYPE_LEVEL_HIGH>,
1807 <GIC_SPI 160 IRQ_TYPE_LEVEL_HIGH>;
1808 interrupt-names = "tx", "rx";
1809 dmas = <&edma_xbar 143 1>, <&edma_xbar 142 1>;
1810 dma-names = "tx", "rx";
1811 clocks = <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 22>,
1812 <&l4per_clkctrl DRA7_MCASP8_CLKCTRL 24>;
1813 clock-names = "fck", "ahclkx";
1814 status = "disabled";
1815 };
1816
1817 crossbar_mpu: crossbar@4a002a48 {
1818 compatible = "ti,irq-crossbar";
1819 reg = <0x4a002a48 0x130>;
1820 interrupt-controller;
1821 interrupt-parent = <&wakeupgen>;
1822 #interrupt-cells = <3>;
1823 ti,max-irqs = <160>;
1824 ti,max-crossbar-sources = <MAX_SOURCES>;
1825 ti,reg-size = <2>;
1826 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
1827 ti,irqs-skip = <10 133 139 140>;
1828 ti,irqs-safe-map = <0>;
1829 };
1830
1831 mac: ethernet@48484000 {
1832 compatible = "ti,dra7-cpsw","ti,cpsw";
1833 ti,hwmods = "gmac";
1834 clocks = <&gmac_main_clk>, <&l3init_clkctrl DRA7_GMAC_CLKCTRL 25>;
1835 clock-names = "fck", "cpts";
1836 cpdma_channels = <8>;
1837 ale_entries = <1024>;
1838 bd_ram_size = <0x2000>;
1839 mac_control = <0x20>;
1840 slaves = <2>;
1841 active_slave = <0>;
1842 cpts_clock_mult = <0x784CFE14>;
1843 cpts_clock_shift = <29>;
1844 reg = <0x48484000 0x1000
1845 0x48485200 0x2E00>;
1846 #address-cells = <1>;
1847 #size-cells = <1>;
1848
1849 /*
1850 * Do not allow gating of cpsw clock as workaround
1851 * for errata i877. Keeping internal clock disabled
1852 * causes the device switching characteristics
1853 * to degrade over time and eventually fail to meet
1854 * the data manual delay time/skew specs.
1855 */
1856 ti,no-idle;
1857
1858 /*
1859 * rx_thresh_pend
1860 * rx_pend
1861 * tx_pend
1862 * misc_pend
1863 */
1864 interrupts = <GIC_SPI 334 IRQ_TYPE_LEVEL_HIGH>,
1865 <GIC_SPI 335 IRQ_TYPE_LEVEL_HIGH>,
1866 <GIC_SPI 336 IRQ_TYPE_LEVEL_HIGH>,
1867 <GIC_SPI 337 IRQ_TYPE_LEVEL_HIGH>;
1868 ranges;
1869 syscon = <&scm_conf>;
1870 status = "disabled";
1871
1872 davinci_mdio: mdio@48485000 {
1873 compatible = "ti,cpsw-mdio","ti,davinci_mdio";
1874 #address-cells = <1>;
1875 #size-cells = <0>;
1876 ti,hwmods = "davinci_mdio";
1877 bus_freq = <1000000>;
1878 reg = <0x48485000 0x100>;
1879 };
1880
1881 cpsw_emac0: slave@48480200 {
1882 /* Filled in by U-Boot */
1883 mac-address = [ 00 00 00 00 00 00 ];
1884 };
1885
1886 cpsw_emac1: slave@48480300 {
1887 /* Filled in by U-Boot */
1888 mac-address = [ 00 00 00 00 00 00 ];
1889 };
1890
1891 phy_sel: cpsw-phy-sel@4a002554 {
1892 compatible = "ti,dra7xx-cpsw-phy-sel";
1893 reg= <0x4a002554 0x4>;
1894 reg-names = "gmii-sel";
1895 };
1896 };
1897
1898 dcan1: can@481cc000 {
1899 compatible = "ti,dra7-d_can";
1900 ti,hwmods = "dcan1";
1901 reg = <0x4ae3c000 0x2000>;
1902 syscon-raminit = <&scm_conf 0x558 0>;
1903 interrupts = <GIC_SPI 222 IRQ_TYPE_LEVEL_HIGH>;
1904 clocks = <&wkupaon_clkctrl DRA7_DCAN1_CLKCTRL 24>;
1905 status = "disabled";
1906 };
1907
1908 dcan2: can@481d0000 {
1909 compatible = "ti,dra7-d_can";
1910 ti,hwmods = "dcan2";
1911 reg = <0x48480000 0x2000>;
1912 syscon-raminit = <&scm_conf 0x558 1>;
1913 interrupts = <GIC_SPI 225 IRQ_TYPE_LEVEL_HIGH>;
1914 clocks = <&sys_clkin1>;
1915 status = "disabled";
1916 };
1917
1918 dss: dss@58000000 {
1919 compatible = "ti,dra7-dss";
1920 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
1921 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
1922 status = "disabled";
1923 ti,hwmods = "dss_core";
1924 /* CTRL_CORE_DSS_PLL_CONTROL */
1925 syscon-pll-ctrl = <&scm_conf 0x538>;
1926 #address-cells = <1>;
1927 #size-cells = <1>;
1928 ranges;
1929
1930 dispc@58001000 {
1931 compatible = "ti,dra7-dispc";
1932 reg = <0x58001000 0x1000>;
1933 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
1934 ti,hwmods = "dss_dispc";
1935 clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 8>;
1936 clock-names = "fck";
1937 /* CTRL_CORE_SMA_SW_1 */
1938 syscon-pol = <&scm_conf 0x534>;
1939 };
1940
1941 hdmi: encoder@58060000 {
1942 compatible = "ti,dra7-hdmi";
1943 reg = <0x58040000 0x200>,
1944 <0x58040200 0x80>,
1945 <0x58040300 0x80>,
1946 <0x58060000 0x19000>;
1947 reg-names = "wp", "pll", "phy", "core";
1948 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
1949 status = "disabled";
1950 ti,hwmods = "dss_hdmi";
1951 clocks = <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 9>,
1952 <&dss_clkctrl DRA7_DSS_CORE_CLKCTRL 10>;
1953 clock-names = "fck", "sys_clk";
1954 dmas = <&sdma_xbar 76>;
1955 dma-names = "audio_tx";
1956 };
1957 };
1958
1959 epwmss0: epwmss@4843e000 {
1960 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1961 reg = <0x4843e000 0x30>;
1962 ti,hwmods = "epwmss0";
1963 #address-cells = <1>;
1964 #size-cells = <1>;
1965 status = "disabled";
1966 ranges;
1967
1968 ehrpwm0: pwm@4843e200 {
1969 compatible = "ti,dra746-ehrpwm",
1970 "ti,am3352-ehrpwm";
1971 #pwm-cells = <3>;
1972 reg = <0x4843e200 0x80>;
1973 clocks = <&ehrpwm0_tbclk>, <&l4_root_clk_div>;
1974 clock-names = "tbclk", "fck";
1975 status = "disabled";
1976 };
1977
1978 ecap0: ecap@4843e100 {
1979 compatible = "ti,dra746-ecap",
1980 "ti,am3352-ecap";
1981 #pwm-cells = <3>;
1982 reg = <0x4843e100 0x80>;
1983 clocks = <&l4_root_clk_div>;
1984 clock-names = "fck";
1985 status = "disabled";
1986 };
1987 };
1988
1989 epwmss1: epwmss@48440000 {
1990 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
1991 reg = <0x48440000 0x30>;
1992 ti,hwmods = "epwmss1";
1993 #address-cells = <1>;
1994 #size-cells = <1>;
1995 status = "disabled";
1996 ranges;
1997
1998 ehrpwm1: pwm@48440200 {
1999 compatible = "ti,dra746-ehrpwm",
2000 "ti,am3352-ehrpwm";
2001 #pwm-cells = <3>;
2002 reg = <0x48440200 0x80>;
2003 clocks = <&ehrpwm1_tbclk>, <&l4_root_clk_div>;
2004 clock-names = "tbclk", "fck";
2005 status = "disabled";
2006 };
2007
2008 ecap1: ecap@48440100 {
2009 compatible = "ti,dra746-ecap",
2010 "ti,am3352-ecap";
2011 #pwm-cells = <3>;
2012 reg = <0x48440100 0x80>;
2013 clocks = <&l4_root_clk_div>;
2014 clock-names = "fck";
2015 status = "disabled";
2016 };
2017 };
2018
2019 epwmss2: epwmss@48442000 {
2020 compatible = "ti,dra746-pwmss", "ti,am33xx-pwmss";
2021 reg = <0x48442000 0x30>;
2022 ti,hwmods = "epwmss2";
2023 #address-cells = <1>;
2024 #size-cells = <1>;
2025 status = "disabled";
2026 ranges;
2027
2028 ehrpwm2: pwm@48442200 {
2029 compatible = "ti,dra746-ehrpwm",
2030 "ti,am3352-ehrpwm";
2031 #pwm-cells = <3>;
2032 reg = <0x48442200 0x80>;
2033 clocks = <&ehrpwm2_tbclk>, <&l4_root_clk_div>;
2034 clock-names = "tbclk", "fck";
2035 status = "disabled";
2036 };
2037
2038 ecap2: ecap@48442100 {
2039 compatible = "ti,dra746-ecap",
2040 "ti,am3352-ecap";
2041 #pwm-cells = <3>;
2042 reg = <0x48442100 0x80>;
2043 clocks = <&l4_root_clk_div>;
2044 clock-names = "fck";
2045 status = "disabled";
2046 };
2047 };
2048
2049 aes1: aes@4b500000 {
2050 compatible = "ti,omap4-aes";
2051 ti,hwmods = "aes1";
2052 reg = <0x4b500000 0xa0>;
2053 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
2054 dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
2055 dma-names = "tx", "rx";
2056 clocks = <&l3_iclk_div>;
2057 clock-names = "fck";
2058 };
2059
2060 aes2: aes@4b700000 {
2061 compatible = "ti,omap4-aes";
2062 ti,hwmods = "aes2";
2063 reg = <0x4b700000 0xa0>;
2064 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
2065 dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
2066 dma-names = "tx", "rx";
2067 clocks = <&l3_iclk_div>;
2068 clock-names = "fck";
2069 };
2070
2071 des: des@480a5000 {
2072 compatible = "ti,omap4-des";
2073 ti,hwmods = "des";
2074 reg = <0x480a5000 0xa0>;
2075 interrupts = <GIC_SPI 77 IRQ_TYPE_LEVEL_HIGH>;
2076 dmas = <&sdma_xbar 117>, <&sdma_xbar 116>;
2077 dma-names = "tx", "rx";
2078 clocks = <&l3_iclk_div>;
2079 clock-names = "fck";
2080 };
2081
2082 sham: sham@53100000 {
2083 compatible = "ti,omap5-sham";
2084 ti,hwmods = "sham";
2085 reg = <0x4b101000 0x300>;
2086 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
2087 dmas = <&edma_xbar 119 0>;
2088 dma-names = "rx";
2089 clocks = <&l3_iclk_div>;
2090 clock-names = "fck";
2091 };
2092
2093 rng: rng@48090000 {
2094 compatible = "ti,omap4-rng";
2095 ti,hwmods = "rng";
2096 reg = <0x48090000 0x2000>;
2097 interrupts = <GIC_SPI 47 IRQ_TYPE_LEVEL_HIGH>;
2098 clocks = <&l3_iclk_div>;
2099 clock-names = "fck";
2100 };
2101
2102 opp_supply_mpu: opp-supply@4a003b20 {
2103 compatible = "ti,omap5-opp-supply";
2104 reg = <0x4a003b20 0xc>;
2105 ti,efuse-settings = <
2106 /* uV offset */
2107 1060000 0x0
2108 1160000 0x4
2109 1210000 0x8
2110 >;
2111 ti,absolute-max-voltage-uv = <1500000>;
2112 };
2113
2114 };
2115
2116 thermal_zones: thermal-zones {
2117 #include "omap4-cpu-thermal.dtsi"
2118 #include "omap5-gpu-thermal.dtsi"
2119 #include "omap5-core-thermal.dtsi"
2120 #include "dra7-dspeve-thermal.dtsi"
2121 #include "dra7-iva-thermal.dtsi"
2122 };
2123
2124};
2125
2126&cpu_thermal {
2127 polling-delay = <500>; /* milliseconds */
2128 coefficients = <0 2000>;
2129};
2130
2131&gpu_thermal {
2132 coefficients = <0 2000>;
2133};
2134
2135&core_thermal {
2136 coefficients = <0 2000>;
2137};
2138
2139&dspeve_thermal {
2140 coefficients = <0 2000>;
2141};
2142
2143&iva_thermal {
2144 coefficients = <0 2000>;
2145};
2146
2147&cpu_crit {
2148 temperature = <120000>; /* milli Celsius */
2149};
2150
2151#include "dra7xx-clocks.dtsi"
2152
2153&core_crit {
2154 temperature = <120000>; /* milli Celsius */
2155};
2156
2157&gpu_crit {
2158 temperature = <120000>; /* milli Celsius */
2159};
2160
2161&dspeve_crit {
2162 temperature = <120000>; /* milli Celsius */
2163};
2164
2165&iva_crit {
2166 temperature = <120000>; /* milli Celsius */
2167};
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2013 Texas Instruments Incorporated - https://www.ti.com/
4 *
5 * Based on "omap4.dtsi"
6 */
7
8#include <dt-bindings/bus/ti-sysc.h>
9#include <dt-bindings/clock/dra7.h>
10#include <dt-bindings/interrupt-controller/arm-gic.h>
11#include <dt-bindings/pinctrl/dra.h>
12#include <dt-bindings/clock/dra7.h>
13
14#define MAX_SOURCES 400
15
16/ {
17 #address-cells = <2>;
18 #size-cells = <2>;
19
20 compatible = "ti,dra7xx";
21 interrupt-parent = <&crossbar_mpu>;
22 chosen { };
23
24 aliases {
25 i2c0 = &i2c1;
26 i2c1 = &i2c2;
27 i2c2 = &i2c3;
28 i2c3 = &i2c4;
29 i2c4 = &i2c5;
30 serial0 = &uart1;
31 serial1 = &uart2;
32 serial2 = &uart3;
33 serial3 = &uart4;
34 serial4 = &uart5;
35 serial5 = &uart6;
36 serial6 = &uart7;
37 serial7 = &uart8;
38 serial8 = &uart9;
39 serial9 = &uart10;
40 ethernet0 = &cpsw_port1;
41 ethernet1 = &cpsw_port2;
42 d_can0 = &dcan1;
43 d_can1 = &dcan2;
44 spi0 = &qspi;
45 };
46
47 timer {
48 compatible = "arm,armv7-timer";
49 status = "disabled"; /* See ARM architected timer wrap erratum i940 */
50 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
51 <GIC_PPI 14 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
52 <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>,
53 <GIC_PPI 10 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_LOW)>;
54 interrupt-parent = <&gic>;
55 };
56
57 gic: interrupt-controller@48211000 {
58 compatible = "arm,cortex-a15-gic";
59 interrupt-controller;
60 #interrupt-cells = <3>;
61 reg = <0x0 0x48211000 0x0 0x1000>,
62 <0x0 0x48212000 0x0 0x2000>,
63 <0x0 0x48214000 0x0 0x2000>,
64 <0x0 0x48216000 0x0 0x2000>;
65 interrupts = <GIC_PPI 9 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_LEVEL_HIGH)>;
66 interrupt-parent = <&gic>;
67 };
68
69 wakeupgen: interrupt-controller@48281000 {
70 compatible = "ti,omap5-wugen-mpu", "ti,omap4-wugen-mpu";
71 interrupt-controller;
72 #interrupt-cells = <3>;
73 reg = <0x0 0x48281000 0x0 0x1000>;
74 interrupt-parent = <&gic>;
75 };
76
77 cpus {
78 #address-cells = <1>;
79 #size-cells = <0>;
80
81 cpu0: cpu@0 {
82 device_type = "cpu";
83 compatible = "arm,cortex-a15";
84 reg = <0>;
85
86 operating-points-v2 = <&cpu0_opp_table>;
87
88 clocks = <&dpll_mpu_ck>;
89 clock-names = "cpu";
90
91 clock-latency = <300000>; /* From omap-cpufreq driver */
92
93 /* cooling options */
94 #cooling-cells = <2>; /* min followed by max */
95
96 vbb-supply = <&abb_mpu>;
97 };
98 };
99
100 cpu0_opp_table: opp-table {
101 compatible = "operating-points-v2-ti-cpu";
102 syscon = <&scm_wkup>;
103
104 opp_nom-1000000000 {
105 opp-hz = /bits/ 64 <1000000000>;
106 opp-microvolt = <1060000 850000 1150000>,
107 <1060000 850000 1150000>;
108 opp-supported-hw = <0xFF 0x01>;
109 opp-suspend;
110 };
111
112 opp_od-1176000000 {
113 opp-hz = /bits/ 64 <1176000000>;
114 opp-microvolt = <1160000 885000 1160000>,
115 <1160000 885000 1160000>;
116
117 opp-supported-hw = <0xFF 0x02>;
118 };
119
120 opp_high@1500000000 {
121 opp-hz = /bits/ 64 <1500000000>;
122 opp-microvolt = <1210000 950000 1250000>,
123 <1210000 950000 1250000>;
124 opp-supported-hw = <0xFF 0x04>;
125 };
126 };
127
128 /*
129 * XXX: Use a flat representation of the SOC interconnect.
130 * The real OMAP interconnect network is quite complex.
131 * Since it will not bring real advantage to represent that in DT for
132 * the moment, just use a fake OCP bus entry to represent the whole bus
133 * hierarchy.
134 */
135 ocp: ocp {
136 compatible = "simple-pm-bus";
137 power-domains = <&prm_core>;
138 clocks = <&l3main1_clkctrl DRA7_L3MAIN1_L3_MAIN_1_CLKCTRL 0>,
139 <&l3instr_clkctrl DRA7_L3INSTR_L3_MAIN_2_CLKCTRL 0>;
140 #address-cells = <1>;
141 #size-cells = <1>;
142 ranges = <0x0 0x0 0x0 0xc0000000>;
143 dma-ranges = <0x80000000 0x0 0x80000000 0x80000000>;
144
145 l3-noc@44000000 {
146 compatible = "ti,dra7-l3-noc";
147 reg = <0x44000000 0x1000>,
148 <0x45000000 0x1000>;
149 interrupts-extended = <&crossbar_mpu GIC_SPI 4 IRQ_TYPE_LEVEL_HIGH>,
150 <&wakeupgen GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>;
151 };
152
153 l4_cfg: interconnect@4a000000 {
154 };
155 l4_wkup: interconnect@4ae00000 {
156 };
157 l4_per1: interconnect@48000000 {
158 };
159
160 target-module@48210000 {
161 compatible = "ti,sysc-omap4-simple", "ti,sysc";
162 power-domains = <&prm_mpu>;
163 clocks = <&mpu_clkctrl DRA7_MPU_MPU_CLKCTRL 0>;
164 clock-names = "fck";
165 #address-cells = <1>;
166 #size-cells = <1>;
167 ranges = <0 0x48210000 0x1f0000>;
168
169 mpu {
170 compatible = "ti,omap5-mpu";
171 };
172 };
173
174 l4_per2: interconnect@48400000 {
175 };
176 l4_per3: interconnect@48800000 {
177 };
178
179 /*
180 * Register access seems to have complex dependencies and also
181 * seems to need an enabled phy. See the TRM chapter for "Table
182 * 26-678. Main Sequence PCIe Controller Global Initialization"
183 * and also dra7xx_pcie_probe().
184 */
185 axi0: target-module@51000000 {
186 compatible = "ti,sysc-omap4", "ti,sysc";
187 power-domains = <&prm_l3init>;
188 resets = <&prm_l3init 0>;
189 reset-names = "rstctrl";
190 clocks = <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 0>,
191 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 9>,
192 <&pcie_clkctrl DRA7_PCIE_PCIE1_CLKCTRL 10>;
193 clock-names = "fck", "phy-clk", "phy-clk-div";
194 #size-cells = <1>;
195 #address-cells = <1>;
196 ranges = <0x51000000 0x51000000 0x3000>,
197 <0x20000000 0x20000000 0x10000000>;
198 dma-ranges;
199 /**
200 * To enable PCI endpoint mode, disable the pcie1_rc
201 * node and enable pcie1_ep mode.
202 */
203 pcie1_rc: pcie@51000000 {
204 reg = <0x51000000 0x2000>,
205 <0x51002000 0x14c>,
206 <0x20001000 0x2000>;
207 reg-names = "rc_dbics", "ti_conf", "config";
208 interrupts = <0 232 0x4>, <0 233 0x4>;
209 #address-cells = <3>;
210 #size-cells = <2>;
211 device_type = "pci";
212 ranges = <0x81000000 0 0x00000000 0x20003000 0 0x00010000>,
213 <0x82000000 0 0x20013000 0x20013000 0 0x0ffed000>;
214 bus-range = <0x00 0xff>;
215 #interrupt-cells = <1>;
216 num-lanes = <1>;
217 linux,pci-domain = <0>;
218 phys = <&pcie1_phy>;
219 phy-names = "pcie-phy0";
220 ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
221 interrupt-map-mask = <0 0 0 7>;
222 interrupt-map = <0 0 0 1 &pcie1_intc 1>,
223 <0 0 0 2 &pcie1_intc 2>,
224 <0 0 0 3 &pcie1_intc 3>,
225 <0 0 0 4 &pcie1_intc 4>;
226 ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
227 status = "disabled";
228 pcie1_intc: interrupt-controller {
229 interrupt-controller;
230 #address-cells = <0>;
231 #interrupt-cells = <1>;
232 };
233 };
234
235 pcie1_ep: pcie_ep@51000000 {
236 reg = <0x51000000 0x28>,
237 <0x51002000 0x14c>,
238 <0x51001000 0x28>,
239 <0x20001000 0x10000000>;
240 reg-names = "ep_dbics", "ti_conf", "ep_dbics2", "addr_space";
241 interrupts = <0 232 0x4>;
242 num-lanes = <1>;
243 num-ib-windows = <4>;
244 num-ob-windows = <16>;
245 phys = <&pcie1_phy>;
246 phy-names = "pcie-phy0";
247 ti,syscon-unaligned-access = <&scm_conf1 0x14 1>;
248 ti,syscon-lane-sel = <&scm_conf_pcie 0x18>;
249 status = "disabled";
250 };
251 };
252
253 /*
254 * Register access seems to have complex dependencies and also
255 * seems to need an enabled phy. See the TRM chapter for "Table
256 * 26-678. Main Sequence PCIe Controller Global Initialization"
257 * and also dra7xx_pcie_probe().
258 */
259 axi1: target-module@51800000 {
260 compatible = "ti,sysc-omap4", "ti,sysc";
261 clocks = <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 0>,
262 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 9>,
263 <&pcie_clkctrl DRA7_PCIE_PCIE2_CLKCTRL 10>;
264 clock-names = "fck", "phy-clk", "phy-clk-div";
265 power-domains = <&prm_l3init>;
266 resets = <&prm_l3init 1>;
267 reset-names = "rstctrl";
268 #size-cells = <1>;
269 #address-cells = <1>;
270 ranges = <0x51800000 0x51800000 0x3000>,
271 <0x30000000 0x30000000 0x10000000>;
272 dma-ranges;
273 status = "disabled";
274 pcie2_rc: pcie@51800000 {
275 reg = <0x51800000 0x2000>,
276 <0x51802000 0x14c>,
277 <0x30001000 0x2000>;
278 reg-names = "rc_dbics", "ti_conf", "config";
279 interrupts = <0 355 0x4>, <0 356 0x4>;
280 #address-cells = <3>;
281 #size-cells = <2>;
282 device_type = "pci";
283 ranges = <0x81000000 0 0x00000000 0x30003000 0 0x00010000>,
284 <0x82000000 0 0x30013000 0x30013000 0 0x0ffed000>;
285 bus-range = <0x00 0xff>;
286 #interrupt-cells = <1>;
287 num-lanes = <1>;
288 linux,pci-domain = <1>;
289 phys = <&pcie2_phy>;
290 phy-names = "pcie-phy0";
291 interrupt-map-mask = <0 0 0 7>;
292 interrupt-map = <0 0 0 1 &pcie2_intc 1>,
293 <0 0 0 2 &pcie2_intc 2>,
294 <0 0 0 3 &pcie2_intc 3>,
295 <0 0 0 4 &pcie2_intc 4>;
296 ti,syscon-unaligned-access = <&scm_conf1 0x14 2>;
297 pcie2_intc: interrupt-controller {
298 interrupt-controller;
299 #address-cells = <0>;
300 #interrupt-cells = <1>;
301 };
302 };
303 };
304
305 ocmcram1: ocmcram@40300000 {
306 compatible = "mmio-sram";
307 reg = <0x40300000 0x80000>;
308 ranges = <0x0 0x40300000 0x80000>;
309 #address-cells = <1>;
310 #size-cells = <1>;
311 /*
312 * This is a placeholder for an optional reserved
313 * region for use by secure software. The size
314 * of this region is not known until runtime so it
315 * is set as zero to either be updated to reserve
316 * space or left unchanged to leave all SRAM for use.
317 * On HS parts that that require the reserved region
318 * either the bootloader can update the size to
319 * the required amount or the node can be overridden
320 * from the board dts file for the secure platform.
321 */
322 sram-hs@0 {
323 compatible = "ti,secure-ram";
324 reg = <0x0 0x0>;
325 };
326 };
327
328 /*
329 * NOTE: ocmcram2 and ocmcram3 are not available on all
330 * DRA7xx and AM57xx variants. Confirm availability in
331 * the data manual for the exact part number in use
332 * before enabling these nodes in the board dts file.
333 */
334 ocmcram2: ocmcram@40400000 {
335 status = "disabled";
336 compatible = "mmio-sram";
337 reg = <0x40400000 0x100000>;
338 ranges = <0x0 0x40400000 0x100000>;
339 #address-cells = <1>;
340 #size-cells = <1>;
341 };
342
343 ocmcram3: ocmcram@40500000 {
344 status = "disabled";
345 compatible = "mmio-sram";
346 reg = <0x40500000 0x100000>;
347 ranges = <0x0 0x40500000 0x100000>;
348 #address-cells = <1>;
349 #size-cells = <1>;
350 };
351
352 bandgap: bandgap@4a0021e0 {
353 reg = <0x4a0021e0 0xc
354 0x4a00232c 0xc
355 0x4a002380 0x2c
356 0x4a0023C0 0x3c
357 0x4a002564 0x8
358 0x4a002574 0x50>;
359 compatible = "ti,dra752-bandgap";
360 interrupts = <GIC_SPI 121 IRQ_TYPE_LEVEL_HIGH>;
361 #thermal-sensor-cells = <1>;
362 };
363
364 dsp1_system: dsp_system@40d00000 {
365 compatible = "syscon";
366 reg = <0x40d00000 0x100>;
367 };
368
369 dra7_iodelay_core: padconf@4844a000 {
370 compatible = "ti,dra7-iodelay";
371 reg = <0x4844a000 0x0d1c>;
372 #address-cells = <1>;
373 #size-cells = <0>;
374 #pinctrl-cells = <2>;
375 };
376
377 target-module@43300000 {
378 compatible = "ti,sysc-omap4", "ti,sysc";
379 reg = <0x43300000 0x4>,
380 <0x43300010 0x4>;
381 reg-names = "rev", "sysc";
382 ti,sysc-midle = <SYSC_IDLE_FORCE>,
383 <SYSC_IDLE_NO>,
384 <SYSC_IDLE_SMART>;
385 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
386 <SYSC_IDLE_NO>,
387 <SYSC_IDLE_SMART>;
388 clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPCC_CLKCTRL 0>;
389 clock-names = "fck";
390 #address-cells = <1>;
391 #size-cells = <1>;
392 ranges = <0x0 0x43300000 0x100000>;
393
394 edma: dma@0 {
395 compatible = "ti,edma3-tpcc";
396 reg = <0 0x100000>;
397 reg-names = "edma3_cc";
398 interrupts = <GIC_SPI 361 IRQ_TYPE_LEVEL_HIGH>,
399 <GIC_SPI 360 IRQ_TYPE_LEVEL_HIGH>,
400 <GIC_SPI 359 IRQ_TYPE_LEVEL_HIGH>;
401 interrupt-names = "edma3_ccint", "edma3_mperr",
402 "edma3_ccerrint";
403 dma-requests = <64>;
404 #dma-cells = <2>;
405
406 ti,tptcs = <&edma_tptc0 7>, <&edma_tptc1 0>;
407
408 /*
409 * memcpy is disabled, can be enabled with:
410 * ti,edma-memcpy-channels = <20 21>;
411 * for example. Note that these channels need to be
412 * masked in the xbar as well.
413 */
414 };
415 };
416
417 target-module@43400000 {
418 compatible = "ti,sysc-omap4", "ti,sysc";
419 reg = <0x43400000 0x4>,
420 <0x43400010 0x4>;
421 reg-names = "rev", "sysc";
422 ti,sysc-midle = <SYSC_IDLE_FORCE>,
423 <SYSC_IDLE_NO>,
424 <SYSC_IDLE_SMART>;
425 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
426 <SYSC_IDLE_NO>,
427 <SYSC_IDLE_SMART>;
428 clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC0_CLKCTRL 0>;
429 clock-names = "fck";
430 #address-cells = <1>;
431 #size-cells = <1>;
432 ranges = <0x0 0x43400000 0x100000>;
433
434 edma_tptc0: dma@0 {
435 compatible = "ti,edma3-tptc";
436 reg = <0 0x100000>;
437 interrupts = <GIC_SPI 370 IRQ_TYPE_LEVEL_HIGH>;
438 interrupt-names = "edma3_tcerrint";
439 };
440 };
441
442 target-module@43500000 {
443 compatible = "ti,sysc-omap4", "ti,sysc";
444 reg = <0x43500000 0x4>,
445 <0x43500010 0x4>;
446 reg-names = "rev", "sysc";
447 ti,sysc-midle = <SYSC_IDLE_FORCE>,
448 <SYSC_IDLE_NO>,
449 <SYSC_IDLE_SMART>;
450 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
451 <SYSC_IDLE_NO>,
452 <SYSC_IDLE_SMART>;
453 clocks = <&l3main1_clkctrl DRA7_L3MAIN1_TPTC1_CLKCTRL 0>;
454 clock-names = "fck";
455 #address-cells = <1>;
456 #size-cells = <1>;
457 ranges = <0x0 0x43500000 0x100000>;
458
459 edma_tptc1: dma@0 {
460 compatible = "ti,edma3-tptc";
461 reg = <0 0x100000>;
462 interrupts = <GIC_SPI 371 IRQ_TYPE_LEVEL_HIGH>;
463 interrupt-names = "edma3_tcerrint";
464 };
465 };
466
467 target-module@4e000000 {
468 compatible = "ti,sysc-omap2", "ti,sysc";
469 reg = <0x4e000000 0x4>,
470 <0x4e000010 0x4>;
471 reg-names = "rev", "sysc";
472 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
473 <SYSC_IDLE_NO>,
474 <SYSC_IDLE_SMART>;
475 ranges = <0x0 0x4e000000 0x2000000>;
476 #size-cells = <1>;
477 #address-cells = <1>;
478
479 dmm@0 {
480 compatible = "ti,omap5-dmm";
481 reg = <0 0x800>;
482 interrupts = <GIC_SPI 108 IRQ_TYPE_LEVEL_HIGH>;
483 };
484 };
485
486 ipu1: ipu@58820000 {
487 compatible = "ti,dra7-ipu";
488 reg = <0x58820000 0x10000>;
489 reg-names = "l2ram";
490 iommus = <&mmu_ipu1>;
491 status = "disabled";
492 resets = <&prm_ipu 0>, <&prm_ipu 1>;
493 clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
494 firmware-name = "dra7-ipu1-fw.xem4";
495 };
496
497 ipu2: ipu@55020000 {
498 compatible = "ti,dra7-ipu";
499 reg = <0x55020000 0x10000>;
500 reg-names = "l2ram";
501 iommus = <&mmu_ipu2>;
502 status = "disabled";
503 resets = <&prm_core 0>, <&prm_core 1>;
504 clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
505 firmware-name = "dra7-ipu2-fw.xem4";
506 };
507
508 dsp1: dsp@40800000 {
509 compatible = "ti,dra7-dsp";
510 reg = <0x40800000 0x48000>,
511 <0x40e00000 0x8000>,
512 <0x40f00000 0x8000>;
513 reg-names = "l2ram", "l1pram", "l1dram";
514 ti,bootreg = <&scm_conf 0x55c 10>;
515 iommus = <&mmu0_dsp1>, <&mmu1_dsp1>;
516 status = "disabled";
517 resets = <&prm_dsp1 0>;
518 clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
519 firmware-name = "dra7-dsp1-fw.xe66";
520 };
521
522 target-module@40d01000 {
523 compatible = "ti,sysc-omap2", "ti,sysc";
524 reg = <0x40d01000 0x4>,
525 <0x40d01010 0x4>,
526 <0x40d01014 0x4>;
527 reg-names = "rev", "sysc", "syss";
528 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
529 <SYSC_IDLE_NO>,
530 <SYSC_IDLE_SMART>;
531 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
532 SYSC_OMAP2_SOFTRESET |
533 SYSC_OMAP2_AUTOIDLE)>;
534 clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
535 clock-names = "fck";
536 resets = <&prm_dsp1 1>;
537 reset-names = "rstctrl";
538 ranges = <0x0 0x40d01000 0x1000>;
539 #size-cells = <1>;
540 #address-cells = <1>;
541
542 mmu0_dsp1: mmu@0 {
543 compatible = "ti,dra7-dsp-iommu";
544 reg = <0x0 0x100>;
545 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
546 #iommu-cells = <0>;
547 ti,syscon-mmuconfig = <&dsp1_system 0x0>;
548 };
549 };
550
551 target-module@40d02000 {
552 compatible = "ti,sysc-omap2", "ti,sysc";
553 reg = <0x40d02000 0x4>,
554 <0x40d02010 0x4>,
555 <0x40d02014 0x4>;
556 reg-names = "rev", "sysc", "syss";
557 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
558 <SYSC_IDLE_NO>,
559 <SYSC_IDLE_SMART>;
560 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
561 SYSC_OMAP2_SOFTRESET |
562 SYSC_OMAP2_AUTOIDLE)>;
563 clocks = <&dsp1_clkctrl DRA7_DSP1_MMU0_DSP1_CLKCTRL 0>;
564 clock-names = "fck";
565 resets = <&prm_dsp1 1>;
566 reset-names = "rstctrl";
567 ranges = <0x0 0x40d02000 0x1000>;
568 #size-cells = <1>;
569 #address-cells = <1>;
570
571 mmu1_dsp1: mmu@0 {
572 compatible = "ti,dra7-dsp-iommu";
573 reg = <0x0 0x100>;
574 interrupts = <GIC_SPI 145 IRQ_TYPE_LEVEL_HIGH>;
575 #iommu-cells = <0>;
576 ti,syscon-mmuconfig = <&dsp1_system 0x1>;
577 };
578 };
579
580 target-module@58882000 {
581 compatible = "ti,sysc-omap2", "ti,sysc";
582 reg = <0x58882000 0x4>,
583 <0x58882010 0x4>,
584 <0x58882014 0x4>;
585 reg-names = "rev", "sysc", "syss";
586 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
587 <SYSC_IDLE_NO>,
588 <SYSC_IDLE_SMART>;
589 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
590 SYSC_OMAP2_SOFTRESET |
591 SYSC_OMAP2_AUTOIDLE)>;
592 clocks = <&ipu1_clkctrl DRA7_IPU1_MMU_IPU1_CLKCTRL 0>;
593 clock-names = "fck";
594 resets = <&prm_ipu 2>;
595 reset-names = "rstctrl";
596 #address-cells = <1>;
597 #size-cells = <1>;
598 ranges = <0x0 0x58882000 0x100>;
599
600 mmu_ipu1: mmu@0 {
601 compatible = "ti,dra7-iommu";
602 reg = <0x0 0x100>;
603 interrupts = <GIC_SPI 395 IRQ_TYPE_LEVEL_HIGH>;
604 #iommu-cells = <0>;
605 ti,iommu-bus-err-back;
606 };
607 };
608
609 target-module@55082000 {
610 compatible = "ti,sysc-omap2", "ti,sysc";
611 reg = <0x55082000 0x4>,
612 <0x55082010 0x4>,
613 <0x55082014 0x4>;
614 reg-names = "rev", "sysc", "syss";
615 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
616 <SYSC_IDLE_NO>,
617 <SYSC_IDLE_SMART>;
618 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
619 SYSC_OMAP2_SOFTRESET |
620 SYSC_OMAP2_AUTOIDLE)>;
621 clocks = <&ipu2_clkctrl DRA7_IPU2_MMU_IPU2_CLKCTRL 0>;
622 clock-names = "fck";
623 resets = <&prm_core 2>;
624 reset-names = "rstctrl";
625 #address-cells = <1>;
626 #size-cells = <1>;
627 ranges = <0x0 0x55082000 0x100>;
628
629 mmu_ipu2: mmu@0 {
630 compatible = "ti,dra7-iommu";
631 reg = <0x0 0x100>;
632 interrupts = <GIC_SPI 396 IRQ_TYPE_LEVEL_HIGH>;
633 #iommu-cells = <0>;
634 ti,iommu-bus-err-back;
635 };
636 };
637
638 abb_mpu: regulator-abb-mpu {
639 compatible = "ti,abb-v3";
640 regulator-name = "abb_mpu";
641 #address-cells = <0>;
642 #size-cells = <0>;
643 clocks = <&sys_clkin1>;
644 ti,settling-time = <50>;
645 ti,clock-cycles = <16>;
646
647 reg = <0x4ae07ddc 0x4>, <0x4ae07de0 0x4>,
648 <0x4ae06014 0x4>, <0x4a003b20 0xc>,
649 <0x4ae0c158 0x4>;
650 reg-names = "setup-address", "control-address",
651 "int-address", "efuse-address",
652 "ldo-address";
653 ti,tranxdone-status-mask = <0x80>;
654 /* LDOVBBMPU_FBB_MUX_CTRL */
655 ti,ldovbb-override-mask = <0x400>;
656 /* LDOVBBMPU_FBB_VSET_OUT */
657 ti,ldovbb-vset-mask = <0x1F>;
658
659 /*
660 * NOTE: only FBB mode used but actual vset will
661 * determine final biasing
662 */
663 ti,abb_info = <
664 /*uV ABB efuse rbb_m fbb_m vset_m*/
665 1060000 0 0x0 0 0x02000000 0x01F00000
666 1160000 0 0x4 0 0x02000000 0x01F00000
667 1210000 0 0x8 0 0x02000000 0x01F00000
668 >;
669 };
670
671 abb_ivahd: regulator-abb-ivahd {
672 compatible = "ti,abb-v3";
673 regulator-name = "abb_ivahd";
674 #address-cells = <0>;
675 #size-cells = <0>;
676 clocks = <&sys_clkin1>;
677 ti,settling-time = <50>;
678 ti,clock-cycles = <16>;
679
680 reg = <0x4ae07e34 0x4>, <0x4ae07e24 0x4>,
681 <0x4ae06010 0x4>, <0x4a0025cc 0xc>,
682 <0x4a002470 0x4>;
683 reg-names = "setup-address", "control-address",
684 "int-address", "efuse-address",
685 "ldo-address";
686 ti,tranxdone-status-mask = <0x40000000>;
687 /* LDOVBBIVA_FBB_MUX_CTRL */
688 ti,ldovbb-override-mask = <0x400>;
689 /* LDOVBBIVA_FBB_VSET_OUT */
690 ti,ldovbb-vset-mask = <0x1F>;
691
692 /*
693 * NOTE: only FBB mode used but actual vset will
694 * determine final biasing
695 */
696 ti,abb_info = <
697 /*uV ABB efuse rbb_m fbb_m vset_m*/
698 1055000 0 0x0 0 0x02000000 0x01F00000
699 1150000 0 0x4 0 0x02000000 0x01F00000
700 1250000 0 0x8 0 0x02000000 0x01F00000
701 >;
702 };
703
704 abb_dspeve: regulator-abb-dspeve {
705 compatible = "ti,abb-v3";
706 regulator-name = "abb_dspeve";
707 #address-cells = <0>;
708 #size-cells = <0>;
709 clocks = <&sys_clkin1>;
710 ti,settling-time = <50>;
711 ti,clock-cycles = <16>;
712
713 reg = <0x4ae07e30 0x4>, <0x4ae07e20 0x4>,
714 <0x4ae06010 0x4>, <0x4a0025e0 0xc>,
715 <0x4a00246c 0x4>;
716 reg-names = "setup-address", "control-address",
717 "int-address", "efuse-address",
718 "ldo-address";
719 ti,tranxdone-status-mask = <0x20000000>;
720 /* LDOVBBDSPEVE_FBB_MUX_CTRL */
721 ti,ldovbb-override-mask = <0x400>;
722 /* LDOVBBDSPEVE_FBB_VSET_OUT */
723 ti,ldovbb-vset-mask = <0x1F>;
724
725 /*
726 * NOTE: only FBB mode used but actual vset will
727 * determine final biasing
728 */
729 ti,abb_info = <
730 /*uV ABB efuse rbb_m fbb_m vset_m*/
731 1055000 0 0x0 0 0x02000000 0x01F00000
732 1150000 0 0x4 0 0x02000000 0x01F00000
733 1250000 0 0x8 0 0x02000000 0x01F00000
734 >;
735 };
736
737 abb_gpu: regulator-abb-gpu {
738 compatible = "ti,abb-v3";
739 regulator-name = "abb_gpu";
740 #address-cells = <0>;
741 #size-cells = <0>;
742 clocks = <&sys_clkin1>;
743 ti,settling-time = <50>;
744 ti,clock-cycles = <16>;
745
746 reg = <0x4ae07de4 0x4>, <0x4ae07de8 0x4>,
747 <0x4ae06010 0x4>, <0x4a003b08 0xc>,
748 <0x4ae0c154 0x4>;
749 reg-names = "setup-address", "control-address",
750 "int-address", "efuse-address",
751 "ldo-address";
752 ti,tranxdone-status-mask = <0x10000000>;
753 /* LDOVBBGPU_FBB_MUX_CTRL */
754 ti,ldovbb-override-mask = <0x400>;
755 /* LDOVBBGPU_FBB_VSET_OUT */
756 ti,ldovbb-vset-mask = <0x1F>;
757
758 /*
759 * NOTE: only FBB mode used but actual vset will
760 * determine final biasing
761 */
762 ti,abb_info = <
763 /*uV ABB efuse rbb_m fbb_m vset_m*/
764 1090000 0 0x0 0 0x02000000 0x01F00000
765 1210000 0 0x4 0 0x02000000 0x01F00000
766 1280000 0 0x8 0 0x02000000 0x01F00000
767 >;
768 };
769
770 target-module@4b300000 {
771 compatible = "ti,sysc-omap4", "ti,sysc";
772 reg = <0x4b300000 0x4>,
773 <0x4b300010 0x4>;
774 reg-names = "rev", "sysc";
775 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
776 <SYSC_IDLE_NO>,
777 <SYSC_IDLE_SMART>,
778 <SYSC_IDLE_SMART_WKUP>;
779 clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 0>;
780 clock-names = "fck";
781 #address-cells = <1>;
782 #size-cells = <1>;
783 ranges = <0x0 0x4b300000 0x1000>,
784 <0x5c000000 0x5c000000 0x4000000>;
785
786 qspi: spi@0 {
787 compatible = "ti,dra7xxx-qspi";
788 reg = <0 0x100>,
789 <0x5c000000 0x4000000>;
790 reg-names = "qspi_base", "qspi_mmap";
791 syscon-chipselects = <&scm_conf 0x558>;
792 #address-cells = <1>;
793 #size-cells = <0>;
794 clocks = <&l4per2_clkctrl DRA7_L4PER2_QSPI_CLKCTRL 25>;
795 clock-names = "fck";
796 num-cs = <4>;
797 interrupts = <GIC_SPI 343 IRQ_TYPE_LEVEL_HIGH>;
798 status = "disabled";
799 };
800 };
801
802 /* OCP2SCP1 */
803 /* IRQ for DWC3_3 and DWC3_4 need IRQ crossbar */
804
805 target-module@50000000 {
806 compatible = "ti,sysc-omap2", "ti,sysc";
807 reg = <0x50000000 4>,
808 <0x50000010 4>,
809 <0x50000014 4>;
810 reg-names = "rev", "sysc", "syss";
811 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
812 <SYSC_IDLE_NO>,
813 <SYSC_IDLE_SMART>;
814 ti,syss-mask = <1>;
815 clocks = <&l3main1_clkctrl DRA7_L3MAIN1_GPMC_CLKCTRL 0>;
816 clock-names = "fck";
817 #address-cells = <1>;
818 #size-cells = <1>;
819 ranges = <0x50000000 0x50000000 0x00001000>, /* regs */
820 <0x00000000 0x00000000 0x40000000>; /* data */
821
822 gpmc: gpmc@50000000 {
823 compatible = "ti,am3352-gpmc";
824 reg = <0x50000000 0x37c>; /* device IO registers */
825 interrupts = <GIC_SPI 15 IRQ_TYPE_LEVEL_HIGH>;
826 dmas = <&edma_xbar 4 0>;
827 dma-names = "rxtx";
828 gpmc,num-cs = <8>;
829 gpmc,num-waitpins = <2>;
830 #address-cells = <2>;
831 #size-cells = <1>;
832 interrupt-controller;
833 #interrupt-cells = <2>;
834 gpio-controller;
835 #gpio-cells = <2>;
836 status = "disabled";
837 };
838 };
839
840 target-module@56000000 {
841 compatible = "ti,sysc-omap4", "ti,sysc";
842 reg = <0x5600fe00 0x4>,
843 <0x5600fe10 0x4>;
844 reg-names = "rev", "sysc";
845 ti,sysc-midle = <SYSC_IDLE_FORCE>,
846 <SYSC_IDLE_NO>,
847 <SYSC_IDLE_SMART>;
848 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
849 <SYSC_IDLE_NO>,
850 <SYSC_IDLE_SMART>;
851 clocks = <&gpu_clkctrl DRA7_GPU_CLKCTRL 0>;
852 clock-names = "fck";
853 #address-cells = <1>;
854 #size-cells = <1>;
855 ranges = <0 0x56000000 0x2000000>;
856 };
857
858 crossbar_mpu: crossbar@4a002a48 {
859 compatible = "ti,irq-crossbar";
860 reg = <0x4a002a48 0x130>;
861 interrupt-controller;
862 interrupt-parent = <&wakeupgen>;
863 #interrupt-cells = <3>;
864 ti,max-irqs = <160>;
865 ti,max-crossbar-sources = <MAX_SOURCES>;
866 ti,reg-size = <2>;
867 ti,irqs-reserved = <0 1 2 3 5 6 131 132>;
868 ti,irqs-skip = <10 133 139 140>;
869 ti,irqs-safe-map = <0>;
870 };
871
872 target-module@58000000 {
873 compatible = "ti,sysc-omap2", "ti,sysc";
874 reg = <0x58000000 4>,
875 <0x58000014 4>;
876 reg-names = "rev", "syss";
877 ti,syss-mask = <1>;
878 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 0>,
879 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
880 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>,
881 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 11>;
882 clock-names = "fck", "hdmi_clk", "sys_clk", "tv_clk";
883 #address-cells = <1>;
884 #size-cells = <1>;
885 ranges = <0 0x58000000 0x800000>;
886
887 dss: dss@0 {
888 compatible = "ti,dra7-dss";
889 /* 'reg' defined in dra72x.dtsi and dra74x.dtsi */
890 /* 'clocks' defined in dra72x.dtsi and dra74x.dtsi */
891 status = "disabled";
892 /* CTRL_CORE_DSS_PLL_CONTROL */
893 syscon-pll-ctrl = <&scm_conf 0x538>;
894 #address-cells = <1>;
895 #size-cells = <1>;
896 ranges = <0 0 0x800000>;
897
898 target-module@1000 {
899 compatible = "ti,sysc-omap2", "ti,sysc";
900 reg = <0x1000 0x4>,
901 <0x1010 0x4>,
902 <0x1014 0x4>;
903 reg-names = "rev", "sysc", "syss";
904 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
905 <SYSC_IDLE_NO>,
906 <SYSC_IDLE_SMART>;
907 ti,sysc-midle = <SYSC_IDLE_FORCE>,
908 <SYSC_IDLE_NO>,
909 <SYSC_IDLE_SMART>;
910 ti,sysc-mask = <(SYSC_OMAP2_CLOCKACTIVITY |
911 SYSC_OMAP2_ENAWAKEUP |
912 SYSC_OMAP2_SOFTRESET |
913 SYSC_OMAP2_AUTOIDLE)>;
914 ti,syss-mask = <1>;
915 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
916 clock-names = "fck";
917 #address-cells = <1>;
918 #size-cells = <1>;
919 ranges = <0 0x1000 0x1000>;
920
921 dispc@0 {
922 compatible = "ti,dra7-dispc";
923 reg = <0 0x1000>;
924 interrupts = <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
925 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
926 clock-names = "fck";
927 /* CTRL_CORE_SMA_SW_1 */
928 syscon-pol = <&scm_conf 0x534>;
929 };
930 };
931
932 target-module@40000 {
933 compatible = "ti,sysc-omap4", "ti,sysc";
934 reg = <0x40000 0x4>,
935 <0x40010 0x4>;
936 reg-names = "rev", "sysc";
937 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
938 <SYSC_IDLE_NO>,
939 <SYSC_IDLE_SMART>,
940 <SYSC_IDLE_SMART_WKUP>;
941 ti,sysc-mask = <(SYSC_OMAP4_SOFTRESET)>;
942 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
943 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 8>;
944 clock-names = "fck", "dss_clk";
945 #address-cells = <1>;
946 #size-cells = <1>;
947 ranges = <0 0x40000 0x40000>;
948
949 hdmi: encoder@0 {
950 compatible = "ti,dra7-hdmi";
951 reg = <0 0x200>,
952 <0x200 0x80>,
953 <0x300 0x80>,
954 <0x20000 0x19000>;
955 reg-names = "wp", "pll", "phy", "core";
956 interrupts = <GIC_SPI 96 IRQ_TYPE_LEVEL_HIGH>;
957 status = "disabled";
958 clocks = <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 9>,
959 <&dss_clkctrl DRA7_DSS_DSS_CORE_CLKCTRL 10>;
960 clock-names = "fck", "sys_clk";
961 dmas = <&sdma_xbar 76>;
962 dma-names = "audio_tx";
963 };
964 };
965 };
966 };
967
968 target-module@59000000 {
969 compatible = "ti,sysc-omap4", "ti,sysc";
970 reg = <0x59000020 0x4>;
971 reg-names = "rev";
972 clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
973 clock-names = "fck";
974 #address-cells = <1>;
975 #size-cells = <1>;
976 ranges = <0x0 0x59000000 0x1000>;
977
978 bb2d: gpu@0 {
979 compatible = "vivante,gc";
980 reg = <0x0 0x700>;
981 interrupts = <GIC_SPI 120 IRQ_TYPE_LEVEL_HIGH>;
982 clocks = <&dss_clkctrl DRA7_DSS_BB2D_CLKCTRL 0>;
983 clock-names = "core";
984 };
985 };
986
987 aes1_target: target-module@4b500000 {
988 compatible = "ti,sysc-omap2", "ti,sysc";
989 reg = <0x4b500080 0x4>,
990 <0x4b500084 0x4>,
991 <0x4b500088 0x4>;
992 reg-names = "rev", "sysc", "syss";
993 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
994 SYSC_OMAP2_AUTOIDLE)>;
995 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
996 <SYSC_IDLE_NO>,
997 <SYSC_IDLE_SMART>,
998 <SYSC_IDLE_SMART_WKUP>;
999 ti,syss-mask = <1>;
1000 /* Domains (P, C): per_pwrdm, l4sec_clkdm */
1001 clocks = <&l4sec_clkctrl DRA7_L4SEC_AES1_CLKCTRL 0>;
1002 clock-names = "fck";
1003 #address-cells = <1>;
1004 #size-cells = <1>;
1005 ranges = <0x0 0x4b500000 0x1000>;
1006
1007 aes1: aes@0 {
1008 compatible = "ti,omap4-aes";
1009 reg = <0 0xa0>;
1010 interrupts = <GIC_SPI 80 IRQ_TYPE_LEVEL_HIGH>;
1011 dmas = <&edma_xbar 111 0>, <&edma_xbar 110 0>;
1012 dma-names = "tx", "rx";
1013 clocks = <&l3_iclk_div>;
1014 clock-names = "fck";
1015 };
1016 };
1017
1018 aes2_target: target-module@4b700000 {
1019 compatible = "ti,sysc-omap2", "ti,sysc";
1020 reg = <0x4b700080 0x4>,
1021 <0x4b700084 0x4>,
1022 <0x4b700088 0x4>;
1023 reg-names = "rev", "sysc", "syss";
1024 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
1025 SYSC_OMAP2_AUTOIDLE)>;
1026 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1027 <SYSC_IDLE_NO>,
1028 <SYSC_IDLE_SMART>,
1029 <SYSC_IDLE_SMART_WKUP>;
1030 ti,syss-mask = <1>;
1031 /* Domains (P, C): per_pwrdm, l4sec_clkdm */
1032 clocks = <&l4sec_clkctrl DRA7_L4SEC_AES2_CLKCTRL 0>;
1033 clock-names = "fck";
1034 #address-cells = <1>;
1035 #size-cells = <1>;
1036 ranges = <0x0 0x4b700000 0x1000>;
1037
1038 aes2: aes@0 {
1039 compatible = "ti,omap4-aes";
1040 reg = <0 0xa0>;
1041 interrupts = <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>;
1042 dmas = <&edma_xbar 114 0>, <&edma_xbar 113 0>;
1043 dma-names = "tx", "rx";
1044 clocks = <&l3_iclk_div>;
1045 clock-names = "fck";
1046 };
1047 };
1048
1049 sham1_target: target-module@4b101000 {
1050 compatible = "ti,sysc-omap3-sham", "ti,sysc";
1051 reg = <0x4b101100 0x4>,
1052 <0x4b101110 0x4>,
1053 <0x4b101114 0x4>;
1054 reg-names = "rev", "sysc", "syss";
1055 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
1056 SYSC_OMAP2_AUTOIDLE)>;
1057 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1058 <SYSC_IDLE_NO>,
1059 <SYSC_IDLE_SMART>;
1060 ti,syss-mask = <1>;
1061 /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
1062 clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM_CLKCTRL 0>;
1063 clock-names = "fck";
1064 #address-cells = <1>;
1065 #size-cells = <1>;
1066 ranges = <0x0 0x4b101000 0x1000>;
1067
1068 sham1: sham@0 {
1069 compatible = "ti,omap5-sham";
1070 reg = <0 0x300>;
1071 interrupts = <GIC_SPI 46 IRQ_TYPE_LEVEL_HIGH>;
1072 dmas = <&edma_xbar 119 0>;
1073 dma-names = "rx";
1074 clocks = <&l3_iclk_div>;
1075 clock-names = "fck";
1076 };
1077 };
1078
1079 sham2_target: target-module@42701000 {
1080 compatible = "ti,sysc-omap3-sham", "ti,sysc";
1081 reg = <0x42701100 0x4>,
1082 <0x42701110 0x4>,
1083 <0x42701114 0x4>;
1084 reg-names = "rev", "sysc", "syss";
1085 ti,sysc-mask = <(SYSC_OMAP2_SOFTRESET |
1086 SYSC_OMAP2_AUTOIDLE)>;
1087 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1088 <SYSC_IDLE_NO>,
1089 <SYSC_IDLE_SMART>;
1090 ti,syss-mask = <1>;
1091 /* Domains (P, C): l4per_pwrdm, l4sec_clkdm */
1092 clocks = <&l4sec_clkctrl DRA7_L4SEC_SHAM2_CLKCTRL 0>;
1093 clock-names = "fck";
1094 #address-cells = <1>;
1095 #size-cells = <1>;
1096 ranges = <0x0 0x42701000 0x1000>;
1097
1098 sham2: sham@0 {
1099 compatible = "ti,omap5-sham";
1100 reg = <0 0x300>;
1101 interrupts = <GIC_SPI 163 IRQ_TYPE_LEVEL_HIGH>;
1102 dmas = <&edma_xbar 165 0>;
1103 dma-names = "rx";
1104 clocks = <&l3_iclk_div>;
1105 clock-names = "fck";
1106 };
1107 };
1108
1109 iva_hd_target: target-module@5a000000 {
1110 compatible = "ti,sysc-omap4", "ti,sysc";
1111 reg = <0x5a05a400 0x4>,
1112 <0x5a05a410 0x4>;
1113 reg-names = "rev", "sysc";
1114 ti,sysc-midle = <SYSC_IDLE_FORCE>,
1115 <SYSC_IDLE_NO>,
1116 <SYSC_IDLE_SMART>;
1117 ti,sysc-sidle = <SYSC_IDLE_FORCE>,
1118 <SYSC_IDLE_NO>,
1119 <SYSC_IDLE_SMART>;
1120 power-domains = <&prm_iva>;
1121 resets = <&prm_iva 2>;
1122 reset-names = "rstctrl";
1123 clocks = <&iva_clkctrl DRA7_IVA_CLKCTRL 0>;
1124 clock-names = "fck";
1125 #address-cells = <1>;
1126 #size-cells = <1>;
1127 ranges = <0x5a000000 0x5a000000 0x1000000>,
1128 <0x5b000000 0x5b000000 0x1000000>;
1129
1130 iva {
1131 compatible = "ti,ivahd";
1132 };
1133 };
1134
1135 opp_supply_mpu: opp-supply@4a003b20 {
1136 compatible = "ti,omap5-opp-supply";
1137 reg = <0x4a003b20 0xc>;
1138 ti,efuse-settings = <
1139 /* uV offset */
1140 1060000 0x0
1141 1160000 0x4
1142 1210000 0x8
1143 >;
1144 ti,absolute-max-voltage-uv = <1500000>;
1145 };
1146
1147 };
1148
1149 thermal_zones: thermal-zones {
1150 #include "omap4-cpu-thermal.dtsi"
1151 #include "omap5-gpu-thermal.dtsi"
1152 #include "omap5-core-thermal.dtsi"
1153 #include "dra7-dspeve-thermal.dtsi"
1154 #include "dra7-iva-thermal.dtsi"
1155 };
1156
1157};
1158
1159&cpu_thermal {
1160 polling-delay = <500>; /* milliseconds */
1161 coefficients = <0 2000>;
1162};
1163
1164&gpu_thermal {
1165 coefficients = <0 2000>;
1166};
1167
1168&core_thermal {
1169 coefficients = <0 2000>;
1170};
1171
1172&dspeve_thermal {
1173 coefficients = <0 2000>;
1174};
1175
1176&iva_thermal {
1177 coefficients = <0 2000>;
1178};
1179
1180&cpu_crit {
1181 temperature = <120000>; /* milli Celsius */
1182};
1183
1184&core_crit {
1185 temperature = <120000>; /* milli Celsius */
1186};
1187
1188&gpu_crit {
1189 temperature = <120000>; /* milli Celsius */
1190};
1191
1192&dspeve_crit {
1193 temperature = <120000>; /* milli Celsius */
1194};
1195
1196&iva_crit {
1197 temperature = <120000>; /* milli Celsius */
1198};
1199
1200#include "dra7-l4.dtsi"
1201#include "dra7xx-clocks.dtsi"
1202
1203&prm {
1204 prm_mpu: prm@300 {
1205 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1206 reg = <0x300 0x100>;
1207 #power-domain-cells = <0>;
1208 };
1209
1210 prm_dsp1: prm@400 {
1211 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1212 reg = <0x400 0x100>;
1213 #reset-cells = <1>;
1214 #power-domain-cells = <0>;
1215 };
1216
1217 prm_ipu: prm@500 {
1218 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1219 reg = <0x500 0x100>;
1220 #reset-cells = <1>;
1221 #power-domain-cells = <0>;
1222 };
1223
1224 prm_coreaon: prm@628 {
1225 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1226 reg = <0x628 0xd8>;
1227 #power-domain-cells = <0>;
1228 };
1229
1230 prm_core: prm@700 {
1231 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1232 reg = <0x700 0x100>;
1233 #reset-cells = <1>;
1234 #power-domain-cells = <0>;
1235 };
1236
1237 prm_iva: prm@f00 {
1238 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1239 reg = <0xf00 0x100>;
1240 #reset-cells = <1>;
1241 #power-domain-cells = <0>;
1242 };
1243
1244 prm_cam: prm@1000 {
1245 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1246 reg = <0x1000 0x100>;
1247 #power-domain-cells = <0>;
1248 };
1249
1250 prm_dss: prm@1100 {
1251 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1252 reg = <0x1100 0x100>;
1253 #power-domain-cells = <0>;
1254 };
1255
1256 prm_gpu: prm@1200 {
1257 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1258 reg = <0x1200 0x100>;
1259 #power-domain-cells = <0>;
1260 };
1261
1262 prm_l3init: prm@1300 {
1263 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1264 reg = <0x1300 0x100>;
1265 #reset-cells = <1>;
1266 #power-domain-cells = <0>;
1267 };
1268
1269 prm_l4per: prm@1400 {
1270 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1271 reg = <0x1400 0x100>;
1272 #power-domain-cells = <0>;
1273 };
1274
1275 prm_custefuse: prm@1600 {
1276 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1277 reg = <0x1600 0x100>;
1278 #power-domain-cells = <0>;
1279 };
1280
1281 prm_wkupaon: prm@1724 {
1282 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1283 reg = <0x1724 0x100>;
1284 #power-domain-cells = <0>;
1285 };
1286
1287 prm_dsp2: prm@1b00 {
1288 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1289 reg = <0x1b00 0x40>;
1290 #reset-cells = <1>;
1291 #power-domain-cells = <0>;
1292 };
1293
1294 prm_eve1: prm@1b40 {
1295 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1296 reg = <0x1b40 0x40>;
1297 #power-domain-cells = <0>;
1298 };
1299
1300 prm_eve2: prm@1b80 {
1301 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1302 reg = <0x1b80 0x40>;
1303 #power-domain-cells = <0>;
1304 };
1305
1306 prm_eve3: prm@1bc0 {
1307 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1308 reg = <0x1bc0 0x40>;
1309 #power-domain-cells = <0>;
1310 };
1311
1312 prm_eve4: prm@1c00 {
1313 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1314 reg = <0x1c00 0x60>;
1315 #power-domain-cells = <0>;
1316 };
1317
1318 prm_rtc: prm@1c60 {
1319 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1320 reg = <0x1c60 0x20>;
1321 #power-domain-cells = <0>;
1322 };
1323
1324 prm_vpe: prm@1c80 {
1325 compatible = "ti,dra7-prm-inst", "ti,omap-prm-inst";
1326 reg = <0x1c80 0x80>;
1327 #power-domain-cells = <0>;
1328 };
1329};
1330
1331/* Preferred always-on timer for clockevent */
1332&timer1_target {
1333 ti,no-reset-on-init;
1334 ti,no-idle;
1335 timer@0 {
1336 assigned-clocks = <&wkupaon_clkctrl DRA7_WKUPAON_TIMER1_CLKCTRL 24>;
1337 assigned-clock-parents = <&sys_32k_ck>;
1338 };
1339};
1340
1341/* Local timers, see ARM architected timer wrap erratum i940 */
1342&timer15_target {
1343 ti,no-reset-on-init;
1344 ti,no-idle;
1345 timer@0 {
1346 assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER15_CLKCTRL 24>;
1347 assigned-clock-parents = <&timer_sys_clk_div>;
1348 };
1349};
1350
1351&timer16_target {
1352 ti,no-reset-on-init;
1353 ti,no-idle;
1354 timer@0 {
1355 assigned-clocks = <&l4per3_clkctrl DRA7_L4PER3_TIMER16_CLKCTRL 24>;
1356 assigned-clock-parents = <&timer_sys_clk_div>;
1357 };
1358};