1/*
 2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
 3 *
 4 * This program is free software; you can redistribute it and/or modify
 5 * it under the terms of the GNU General Public License version 2 as
 6 * published by the Free Software Foundation.
 7 */
 8
 9#include "am57xx-beagle-x15-common.dtsi"
10
11/ {
12	model = "TI AM5728 BeagleBoard-X15 rev B1";
13};
14
15&tpd12s015 {
16	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
17		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
18		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
19};
20
21&mmc1 {
22	pinctrl-names = "default", "hs", "sdr12", "sdr25", "sdr50", "ddr50", "sdr104";
23	pinctrl-0 = <&mmc1_pins_default>;
24	pinctrl-1 = <&mmc1_pins_hs>;
25	pinctrl-2 = <&mmc1_pins_sdr12>;
26	pinctrl-3 = <&mmc1_pins_sdr25>;
27	pinctrl-4 = <&mmc1_pins_sdr50>;
28	pinctrl-5 = <&mmc1_pins_ddr50 &mmc1_iodelay_ddr_rev11_conf>;
29	pinctrl-6 = <&mmc1_pins_sdr104 &mmc1_iodelay_sdr104_rev11_conf>;
30	vmmc-supply = <&vdd_3v3>;
31	vqmmc-supply = <&ldo1_reg>;
32};
33
34&mmc2 {
35	pinctrl-names = "default", "hs", "ddr_1_8v";
36	pinctrl-0 = <&mmc2_pins_default>;
37	pinctrl-1 = <&mmc2_pins_hs>;
38	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
39};
40
41/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
42&phy1 {
43	max-speed = <100>;
44};

 1// SPDX-License-Identifier: GPL-2.0-only
 2/*
 3 * Copyright (C) 2014-2016 Texas Instruments Incorporated - https://www.ti.com/
 
 
 
 
 4 */
 5
 6#include "am57xx-beagle-x15-common.dtsi"
 7
 8/ {
 9	model = "TI AM5728 BeagleBoard-X15 rev B1";
10};
11
12&tpd12s015 {
13	gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>,	/* gpio7_10, CT CP HPD */
14		<&gpio2 30 GPIO_ACTIVE_HIGH>,	/* gpio2_30, LS OE */
15		<&gpio7 12 GPIO_ACTIVE_HIGH>;	/* gpio7_12/sp1_cs2, HPD */
16};
17
18&mmc1 {
19	pinctrl-names = "default", "hs";
20	pinctrl-0 = <&mmc1_pins_default>;
21	pinctrl-1 = <&mmc1_pins_hs>;
 
 
 
 
 
22	vmmc-supply = <&vdd_3v3>;
23	vqmmc-supply = <&ldo1_reg>;
24};
25
26&mmc2 {
27	pinctrl-names = "default", "hs", "ddr_3_3v";
28	pinctrl-0 = <&mmc2_pins_default>;
29	pinctrl-1 = <&mmc2_pins_hs>;
30	pinctrl-2 = <&mmc2_pins_ddr_3_3v_rev11 &mmc2_iodelay_ddr_3_3v_rev11_conf>;
31};
32
33/* errata i880 "Ethernet RGMII2 Limited to 10/100 Mbps" */
34&phy1 {
35	max-speed = <100>;
36};