Loading...
1/*
2 * Copyright (C) 2014 Intel Corporation
3 *
4 * DRM universal plane helper functions
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the next
14 * paragraph) shall be included in all copies or substantial portions of the
15 * Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
23 * SOFTWARE.
24 */
25
26#include <linux/list.h>
27#include <drm/drmP.h>
28#include <drm/drm_plane_helper.h>
29#include <drm/drm_rect.h>
30#include <drm/drm_atomic.h>
31#include <drm/drm_crtc_helper.h>
32#include <drm/drm_encoder.h>
33#include <drm/drm_atomic_helper.h>
34
35#define SUBPIXEL_MASK 0xffff
36
37/**
38 * DOC: overview
39 *
40 * This helper library has two parts. The first part has support to implement
41 * primary plane support on top of the normal CRTC configuration interface.
42 * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
43 * plane together with the CRTC state this does not allow userspace to disable
44 * the primary plane itself. To avoid too much duplicated code use
45 * drm_plane_helper_check_update() which can be used to enforce the same
46 * restrictions as primary planes had thus. The default primary plane only
47 * expose XRBG8888 and ARGB8888 as valid pixel formats for the attached
48 * framebuffer.
49 *
50 * Drivers are highly recommended to implement proper support for primary
51 * planes, and newly merged drivers must not rely upon these transitional
52 * helpers.
53 *
54 * The second part also implements transitional helpers which allow drivers to
55 * gradually switch to the atomic helper infrastructure for plane updates. Once
56 * that switch is complete drivers shouldn't use these any longer, instead using
57 * the proper legacy implementations for update and disable plane hooks provided
58 * by the atomic helpers.
59 *
60 * Again drivers are strongly urged to switch to the new interfaces.
61 *
62 * The plane helpers share the function table structures with other helpers,
63 * specifically also the atomic helpers. See &struct drm_plane_helper_funcs for
64 * the details.
65 */
66
67/*
68 * Returns the connectors currently associated with a CRTC. This function
69 * should be called twice: once with a NULL connector list to retrieve
70 * the list size, and once with the properly allocated list to be filled in.
71 */
72static int get_connectors_for_crtc(struct drm_crtc *crtc,
73 struct drm_connector **connector_list,
74 int num_connectors)
75{
76 struct drm_device *dev = crtc->dev;
77 struct drm_connector *connector;
78 struct drm_connector_list_iter conn_iter;
79 int count = 0;
80
81 /*
82 * Note: Once we change the plane hooks to more fine-grained locking we
83 * need to grab the connection_mutex here to be able to make these
84 * checks.
85 */
86 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
87
88 drm_connector_list_iter_begin(dev, &conn_iter);
89 drm_for_each_connector_iter(connector, &conn_iter) {
90 if (connector->encoder && connector->encoder->crtc == crtc) {
91 if (connector_list != NULL && count < num_connectors)
92 *(connector_list++) = connector;
93
94 count++;
95 }
96 }
97 drm_connector_list_iter_end(&conn_iter);
98
99 return count;
100}
101
102/**
103 * drm_plane_helper_check_update() - Check plane update for validity
104 * @plane: plane object to update
105 * @crtc: owning CRTC of owning plane
106 * @fb: framebuffer to flip onto plane
107 * @src: source coordinates in 16.16 fixed point
108 * @dst: integer destination coordinates
109 * @rotation: plane rotation
110 * @min_scale: minimum @src:@dest scaling factor in 16.16 fixed point
111 * @max_scale: maximum @src:@dest scaling factor in 16.16 fixed point
112 * @can_position: is it legal to position the plane such that it
113 * doesn't cover the entire crtc? This will generally
114 * only be false for primary planes.
115 * @can_update_disabled: can the plane be updated while the crtc
116 * is disabled?
117 * @visible: output parameter indicating whether plane is still visible after
118 * clipping
119 *
120 * Checks that a desired plane update is valid. Drivers that provide
121 * their own plane handling rather than helper-provided implementations may
122 * still wish to call this function to avoid duplication of error checking
123 * code.
124 *
125 * RETURNS:
126 * Zero if update appears valid, error code on failure
127 */
128int drm_plane_helper_check_update(struct drm_plane *plane,
129 struct drm_crtc *crtc,
130 struct drm_framebuffer *fb,
131 struct drm_rect *src,
132 struct drm_rect *dst,
133 unsigned int rotation,
134 int min_scale,
135 int max_scale,
136 bool can_position,
137 bool can_update_disabled,
138 bool *visible)
139{
140 struct drm_plane_state plane_state = {
141 .plane = plane,
142 .crtc = crtc,
143 .fb = fb,
144 .src_x = src->x1,
145 .src_y = src->y1,
146 .src_w = drm_rect_width(src),
147 .src_h = drm_rect_height(src),
148 .crtc_x = dst->x1,
149 .crtc_y = dst->y1,
150 .crtc_w = drm_rect_width(dst),
151 .crtc_h = drm_rect_height(dst),
152 .rotation = rotation,
153 .visible = *visible,
154 };
155 struct drm_crtc_state crtc_state = {
156 .crtc = crtc,
157 .enable = crtc->enabled,
158 .mode = crtc->mode,
159 };
160 int ret;
161
162 ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
163 min_scale, max_scale,
164 can_position,
165 can_update_disabled);
166 if (ret)
167 return ret;
168
169 *src = plane_state.src;
170 *dst = plane_state.dst;
171 *visible = plane_state.visible;
172
173 return 0;
174}
175EXPORT_SYMBOL(drm_plane_helper_check_update);
176
177/**
178 * drm_primary_helper_update() - Helper for primary plane update
179 * @plane: plane object to update
180 * @crtc: owning CRTC of owning plane
181 * @fb: framebuffer to flip onto plane
182 * @crtc_x: x offset of primary plane on crtc
183 * @crtc_y: y offset of primary plane on crtc
184 * @crtc_w: width of primary plane rectangle on crtc
185 * @crtc_h: height of primary plane rectangle on crtc
186 * @src_x: x offset of @fb for panning
187 * @src_y: y offset of @fb for panning
188 * @src_w: width of source rectangle in @fb
189 * @src_h: height of source rectangle in @fb
190 * @ctx: lock acquire context, not used here
191 *
192 * Provides a default plane update handler for primary planes. This is handler
193 * is called in response to a userspace SetPlane operation on the plane with a
194 * non-NULL framebuffer. We call the driver's modeset handler to update the
195 * framebuffer.
196 *
197 * SetPlane() on a primary plane of a disabled CRTC is not supported, and will
198 * return an error.
199 *
200 * Note that we make some assumptions about hardware limitations that may not be
201 * true for all hardware --
202 *
203 * 1. Primary plane cannot be repositioned.
204 * 2. Primary plane cannot be scaled.
205 * 3. Primary plane must cover the entire CRTC.
206 * 4. Subpixel positioning is not supported.
207 *
208 * Drivers for hardware that don't have these restrictions can provide their
209 * own implementation rather than using this helper.
210 *
211 * RETURNS:
212 * Zero on success, error code on failure
213 */
214int drm_primary_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
215 struct drm_framebuffer *fb,
216 int crtc_x, int crtc_y,
217 unsigned int crtc_w, unsigned int crtc_h,
218 uint32_t src_x, uint32_t src_y,
219 uint32_t src_w, uint32_t src_h,
220 struct drm_modeset_acquire_ctx *ctx)
221{
222 struct drm_mode_set set = {
223 .crtc = crtc,
224 .fb = fb,
225 .mode = &crtc->mode,
226 .x = src_x >> 16,
227 .y = src_y >> 16,
228 };
229 struct drm_rect src = {
230 .x1 = src_x,
231 .y1 = src_y,
232 .x2 = src_x + src_w,
233 .y2 = src_y + src_h,
234 };
235 struct drm_rect dest = {
236 .x1 = crtc_x,
237 .y1 = crtc_y,
238 .x2 = crtc_x + crtc_w,
239 .y2 = crtc_y + crtc_h,
240 };
241 struct drm_connector **connector_list;
242 int num_connectors, ret;
243 bool visible;
244
245 ret = drm_plane_helper_check_update(plane, crtc, fb,
246 &src, &dest,
247 DRM_MODE_ROTATE_0,
248 DRM_PLANE_HELPER_NO_SCALING,
249 DRM_PLANE_HELPER_NO_SCALING,
250 false, false, &visible);
251 if (ret)
252 return ret;
253
254 if (!visible)
255 /*
256 * Primary plane isn't visible. Note that unless a driver
257 * provides their own disable function, this will just
258 * wind up returning -EINVAL to userspace.
259 */
260 return plane->funcs->disable_plane(plane, ctx);
261
262 /* Find current connectors for CRTC */
263 num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
264 BUG_ON(num_connectors == 0);
265 connector_list = kcalloc(num_connectors, sizeof(*connector_list),
266 GFP_KERNEL);
267 if (!connector_list)
268 return -ENOMEM;
269 get_connectors_for_crtc(crtc, connector_list, num_connectors);
270
271 set.connectors = connector_list;
272 set.num_connectors = num_connectors;
273
274 /*
275 * We call set_config() directly here rather than using
276 * drm_mode_set_config_internal. We're reprogramming the same
277 * connectors that were already in use, so we shouldn't need the extra
278 * cross-CRTC fb refcounting to accomodate stealing connectors.
279 * drm_mode_setplane() already handles the basic refcounting for the
280 * framebuffers involved in this operation.
281 */
282 ret = crtc->funcs->set_config(&set, ctx);
283
284 kfree(connector_list);
285 return ret;
286}
287EXPORT_SYMBOL(drm_primary_helper_update);
288
289/**
290 * drm_primary_helper_disable() - Helper for primary plane disable
291 * @plane: plane to disable
292 * @ctx: lock acquire context, not used here
293 *
294 * Provides a default plane disable handler for primary planes. This is handler
295 * is called in response to a userspace SetPlane operation on the plane with a
296 * NULL framebuffer parameter. It unconditionally fails the disable call with
297 * -EINVAL the only way to disable the primary plane without driver support is
298 * to disable the entire CRTC. Which does not match the plane
299 * &drm_plane_funcs.disable_plane hook.
300 *
301 * Note that some hardware may be able to disable the primary plane without
302 * disabling the whole CRTC. Drivers for such hardware should provide their
303 * own disable handler that disables just the primary plane (and they'll likely
304 * need to provide their own update handler as well to properly re-enable a
305 * disabled primary plane).
306 *
307 * RETURNS:
308 * Unconditionally returns -EINVAL.
309 */
310int drm_primary_helper_disable(struct drm_plane *plane,
311 struct drm_modeset_acquire_ctx *ctx)
312{
313 return -EINVAL;
314}
315EXPORT_SYMBOL(drm_primary_helper_disable);
316
317/**
318 * drm_primary_helper_destroy() - Helper for primary plane destruction
319 * @plane: plane to destroy
320 *
321 * Provides a default plane destroy handler for primary planes. This handler
322 * is called during CRTC destruction. We disable the primary plane, remove
323 * it from the DRM plane list, and deallocate the plane structure.
324 */
325void drm_primary_helper_destroy(struct drm_plane *plane)
326{
327 drm_plane_cleanup(plane);
328 kfree(plane);
329}
330EXPORT_SYMBOL(drm_primary_helper_destroy);
331
332const struct drm_plane_funcs drm_primary_helper_funcs = {
333 .update_plane = drm_primary_helper_update,
334 .disable_plane = drm_primary_helper_disable,
335 .destroy = drm_primary_helper_destroy,
336};
337EXPORT_SYMBOL(drm_primary_helper_funcs);
338
339int drm_plane_helper_commit(struct drm_plane *plane,
340 struct drm_plane_state *plane_state,
341 struct drm_framebuffer *old_fb)
342{
343 const struct drm_plane_helper_funcs *plane_funcs;
344 struct drm_crtc *crtc[2];
345 const struct drm_crtc_helper_funcs *crtc_funcs[2];
346 int i, ret = 0;
347
348 plane_funcs = plane->helper_private;
349
350 /* Since this is a transitional helper we can't assume that plane->state
351 * is always valid. Hence we need to use plane->crtc instead of
352 * plane->state->crtc as the old crtc. */
353 crtc[0] = plane->crtc;
354 crtc[1] = crtc[0] != plane_state->crtc ? plane_state->crtc : NULL;
355
356 for (i = 0; i < 2; i++)
357 crtc_funcs[i] = crtc[i] ? crtc[i]->helper_private : NULL;
358
359 if (plane_funcs->atomic_check) {
360 ret = plane_funcs->atomic_check(plane, plane_state);
361 if (ret)
362 goto out;
363 }
364
365 if (plane_funcs->prepare_fb && plane_state->fb != old_fb) {
366 ret = plane_funcs->prepare_fb(plane,
367 plane_state);
368 if (ret)
369 goto out;
370 }
371
372 /* Point of no return, commit sw state. */
373 swap(plane->state, plane_state);
374
375 for (i = 0; i < 2; i++) {
376 if (crtc_funcs[i] && crtc_funcs[i]->atomic_begin)
377 crtc_funcs[i]->atomic_begin(crtc[i], crtc[i]->state);
378 }
379
380 /*
381 * Drivers may optionally implement the ->atomic_disable callback, so
382 * special-case that here.
383 */
384 if (drm_atomic_plane_disabling(plane_state, plane->state) &&
385 plane_funcs->atomic_disable)
386 plane_funcs->atomic_disable(plane, plane_state);
387 else
388 plane_funcs->atomic_update(plane, plane_state);
389
390 for (i = 0; i < 2; i++) {
391 if (crtc_funcs[i] && crtc_funcs[i]->atomic_flush)
392 crtc_funcs[i]->atomic_flush(crtc[i], crtc[i]->state);
393 }
394
395 /*
396 * If we only moved the plane and didn't change fb's, there's no need to
397 * wait for vblank.
398 */
399 if (plane->state->fb == old_fb)
400 goto out;
401
402 for (i = 0; i < 2; i++) {
403 if (!crtc[i])
404 continue;
405
406 if (crtc[i]->cursor == plane)
407 continue;
408
409 /* There's no other way to figure out whether the crtc is running. */
410 ret = drm_crtc_vblank_get(crtc[i]);
411 if (ret == 0) {
412 drm_crtc_wait_one_vblank(crtc[i]);
413 drm_crtc_vblank_put(crtc[i]);
414 }
415
416 ret = 0;
417 }
418
419 if (plane_funcs->cleanup_fb)
420 plane_funcs->cleanup_fb(plane, plane_state);
421out:
422 if (plane->funcs->atomic_destroy_state)
423 plane->funcs->atomic_destroy_state(plane, plane_state);
424 else
425 drm_atomic_helper_plane_destroy_state(plane, plane_state);
426
427 return ret;
428}
429
430/**
431 * drm_plane_helper_update() - Transitional helper for plane update
432 * @plane: plane object to update
433 * @crtc: owning CRTC of owning plane
434 * @fb: framebuffer to flip onto plane
435 * @crtc_x: x offset of primary plane on crtc
436 * @crtc_y: y offset of primary plane on crtc
437 * @crtc_w: width of primary plane rectangle on crtc
438 * @crtc_h: height of primary plane rectangle on crtc
439 * @src_x: x offset of @fb for panning
440 * @src_y: y offset of @fb for panning
441 * @src_w: width of source rectangle in @fb
442 * @src_h: height of source rectangle in @fb
443 *
444 * Provides a default plane update handler using the atomic plane update
445 * functions. It is fully left to the driver to check plane constraints and
446 * handle corner-cases like a fully occluded or otherwise invisible plane.
447 *
448 * This is useful for piecewise transitioning of a driver to the atomic helpers.
449 *
450 * RETURNS:
451 * Zero on success, error code on failure
452 */
453int drm_plane_helper_update(struct drm_plane *plane, struct drm_crtc *crtc,
454 struct drm_framebuffer *fb,
455 int crtc_x, int crtc_y,
456 unsigned int crtc_w, unsigned int crtc_h,
457 uint32_t src_x, uint32_t src_y,
458 uint32_t src_w, uint32_t src_h)
459{
460 struct drm_plane_state *plane_state;
461
462 if (plane->funcs->atomic_duplicate_state)
463 plane_state = plane->funcs->atomic_duplicate_state(plane);
464 else {
465 if (!plane->state)
466 drm_atomic_helper_plane_reset(plane);
467
468 plane_state = drm_atomic_helper_plane_duplicate_state(plane);
469 }
470 if (!plane_state)
471 return -ENOMEM;
472 plane_state->plane = plane;
473
474 plane_state->crtc = crtc;
475 drm_atomic_set_fb_for_plane(plane_state, fb);
476 plane_state->crtc_x = crtc_x;
477 plane_state->crtc_y = crtc_y;
478 plane_state->crtc_h = crtc_h;
479 plane_state->crtc_w = crtc_w;
480 plane_state->src_x = src_x;
481 plane_state->src_y = src_y;
482 plane_state->src_h = src_h;
483 plane_state->src_w = src_w;
484
485 return drm_plane_helper_commit(plane, plane_state, plane->fb);
486}
487EXPORT_SYMBOL(drm_plane_helper_update);
488
489/**
490 * drm_plane_helper_disable() - Transitional helper for plane disable
491 * @plane: plane to disable
492 *
493 * Provides a default plane disable handler using the atomic plane update
494 * functions. It is fully left to the driver to check plane constraints and
495 * handle corner-cases like a fully occluded or otherwise invisible plane.
496 *
497 * This is useful for piecewise transitioning of a driver to the atomic helpers.
498 *
499 * RETURNS:
500 * Zero on success, error code on failure
501 */
502int drm_plane_helper_disable(struct drm_plane *plane)
503{
504 struct drm_plane_state *plane_state;
505
506 /* crtc helpers love to call disable functions for already disabled hw
507 * functions. So cope with that. */
508 if (!plane->crtc)
509 return 0;
510
511 if (plane->funcs->atomic_duplicate_state)
512 plane_state = plane->funcs->atomic_duplicate_state(plane);
513 else {
514 if (!plane->state)
515 drm_atomic_helper_plane_reset(plane);
516
517 plane_state = drm_atomic_helper_plane_duplicate_state(plane);
518 }
519 if (!plane_state)
520 return -ENOMEM;
521 plane_state->plane = plane;
522
523 plane_state->crtc = NULL;
524 drm_atomic_set_fb_for_plane(plane_state, NULL);
525
526 return drm_plane_helper_commit(plane, plane_state, plane->fb);
527}
528EXPORT_SYMBOL(drm_plane_helper_disable);
1/*
2 * Copyright (C) 2014 Intel Corporation
3 *
4 * DRM universal plane helper functions
5 *
6 * Permission is hereby granted, free of charge, to any person obtaining a
7 * copy of this software and associated documentation files (the "Software"),
8 * to deal in the Software without restriction, including without limitation
9 * the rights to use, copy, modify, merge, publish, distribute, sublicense,
10 * and/or sell copies of the Software, and to permit persons to whom the
11 * Software is furnished to do so, subject to the following conditions:
12 *
13 * The above copyright notice and this permission notice (including the next
14 * paragraph) shall be included in all copies or substantial portions of the
15 * Software.
16 *
17 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
18 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
19 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
20 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
21 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
22 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE
23 * SOFTWARE.
24 */
25
26#include <linux/list.h>
27
28#include <drm/drm_atomic.h>
29#include <drm/drm_atomic_helper.h>
30#include <drm/drm_atomic_uapi.h>
31#include <drm/drm_crtc_helper.h>
32#include <drm/drm_device.h>
33#include <drm/drm_drv.h>
34#include <drm/drm_encoder.h>
35#include <drm/drm_plane_helper.h>
36#include <drm/drm_print.h>
37#include <drm/drm_rect.h>
38
39#define SUBPIXEL_MASK 0xffff
40
41/**
42 * DOC: overview
43 *
44 * This helper library has two parts. The first part has support to implement
45 * primary plane support on top of the normal CRTC configuration interface.
46 * Since the legacy &drm_mode_config_funcs.set_config interface ties the primary
47 * plane together with the CRTC state this does not allow userspace to disable
48 * the primary plane itself. The default primary plane only expose XRBG8888 and
49 * ARGB8888 as valid pixel formats for the attached framebuffer.
50 *
51 * Drivers are highly recommended to implement proper support for primary
52 * planes, and newly merged drivers must not rely upon these transitional
53 * helpers.
54 *
55 * The second part also implements transitional helpers which allow drivers to
56 * gradually switch to the atomic helper infrastructure for plane updates. Once
57 * that switch is complete drivers shouldn't use these any longer, instead using
58 * the proper legacy implementations for update and disable plane hooks provided
59 * by the atomic helpers.
60 *
61 * Again drivers are strongly urged to switch to the new interfaces.
62 *
63 * The plane helpers share the function table structures with other helpers,
64 * specifically also the atomic helpers. See &struct drm_plane_helper_funcs for
65 * the details.
66 */
67
68/*
69 * Returns the connectors currently associated with a CRTC. This function
70 * should be called twice: once with a NULL connector list to retrieve
71 * the list size, and once with the properly allocated list to be filled in.
72 */
73static int get_connectors_for_crtc(struct drm_crtc *crtc,
74 struct drm_connector **connector_list,
75 int num_connectors)
76{
77 struct drm_device *dev = crtc->dev;
78 struct drm_connector *connector;
79 struct drm_connector_list_iter conn_iter;
80 int count = 0;
81
82 /*
83 * Note: Once we change the plane hooks to more fine-grained locking we
84 * need to grab the connection_mutex here to be able to make these
85 * checks.
86 */
87 WARN_ON(!drm_modeset_is_locked(&dev->mode_config.connection_mutex));
88
89 drm_connector_list_iter_begin(dev, &conn_iter);
90 drm_for_each_connector_iter(connector, &conn_iter) {
91 if (connector->encoder && connector->encoder->crtc == crtc) {
92 if (connector_list != NULL && count < num_connectors)
93 *(connector_list++) = connector;
94
95 count++;
96 }
97 }
98 drm_connector_list_iter_end(&conn_iter);
99
100 return count;
101}
102
103static int drm_plane_helper_check_update(struct drm_plane *plane,
104 struct drm_crtc *crtc,
105 struct drm_framebuffer *fb,
106 struct drm_rect *src,
107 struct drm_rect *dst,
108 unsigned int rotation,
109 int min_scale,
110 int max_scale,
111 bool can_position,
112 bool can_update_disabled,
113 bool *visible)
114{
115 struct drm_plane_state plane_state = {
116 .plane = plane,
117 .crtc = crtc,
118 .fb = fb,
119 .src_x = src->x1,
120 .src_y = src->y1,
121 .src_w = drm_rect_width(src),
122 .src_h = drm_rect_height(src),
123 .crtc_x = dst->x1,
124 .crtc_y = dst->y1,
125 .crtc_w = drm_rect_width(dst),
126 .crtc_h = drm_rect_height(dst),
127 .rotation = rotation,
128 };
129 struct drm_crtc_state crtc_state = {
130 .crtc = crtc,
131 .enable = crtc->enabled,
132 .mode = crtc->mode,
133 };
134 int ret;
135
136 ret = drm_atomic_helper_check_plane_state(&plane_state, &crtc_state,
137 min_scale, max_scale,
138 can_position,
139 can_update_disabled);
140 if (ret)
141 return ret;
142
143 *src = plane_state.src;
144 *dst = plane_state.dst;
145 *visible = plane_state.visible;
146
147 return 0;
148}
149
150/**
151 * drm_plane_helper_update_primary - Helper for updating primary planes
152 * @plane: plane to update
153 * @crtc: the plane's new CRTC
154 * @fb: the plane's new framebuffer
155 * @crtc_x: x coordinate within CRTC
156 * @crtc_y: y coordinate within CRTC
157 * @crtc_w: width coordinate within CRTC
158 * @crtc_h: height coordinate within CRTC
159 * @src_x: x coordinate within source
160 * @src_y: y coordinate within source
161 * @src_w: width coordinate within source
162 * @src_h: height coordinate within source
163 * @ctx: modeset locking context
164 *
165 * This helper validates the given parameters and updates the primary plane.
166 *
167 * This function is only useful for non-atomic modesetting. Don't use
168 * it in new drivers.
169 *
170 * Returns:
171 * Zero on success, or an errno code otherwise.
172 */
173int drm_plane_helper_update_primary(struct drm_plane *plane, struct drm_crtc *crtc,
174 struct drm_framebuffer *fb,
175 int crtc_x, int crtc_y,
176 unsigned int crtc_w, unsigned int crtc_h,
177 uint32_t src_x, uint32_t src_y,
178 uint32_t src_w, uint32_t src_h,
179 struct drm_modeset_acquire_ctx *ctx)
180{
181 struct drm_mode_set set = {
182 .crtc = crtc,
183 .fb = fb,
184 .mode = &crtc->mode,
185 .x = src_x >> 16,
186 .y = src_y >> 16,
187 };
188 struct drm_rect src = {
189 .x1 = src_x,
190 .y1 = src_y,
191 .x2 = src_x + src_w,
192 .y2 = src_y + src_h,
193 };
194 struct drm_rect dest = {
195 .x1 = crtc_x,
196 .y1 = crtc_y,
197 .x2 = crtc_x + crtc_w,
198 .y2 = crtc_y + crtc_h,
199 };
200 struct drm_device *dev = plane->dev;
201 struct drm_connector **connector_list;
202 int num_connectors, ret;
203 bool visible;
204
205 if (drm_WARN_ON_ONCE(dev, drm_drv_uses_atomic_modeset(dev)))
206 return -EINVAL;
207
208 ret = drm_plane_helper_check_update(plane, crtc, fb,
209 &src, &dest,
210 DRM_MODE_ROTATE_0,
211 DRM_PLANE_NO_SCALING,
212 DRM_PLANE_NO_SCALING,
213 false, false, &visible);
214 if (ret)
215 return ret;
216
217 if (!visible)
218 /*
219 * Primary plane isn't visible. Note that unless a driver
220 * provides their own disable function, this will just
221 * wind up returning -EINVAL to userspace.
222 */
223 return plane->funcs->disable_plane(plane, ctx);
224
225 /* Find current connectors for CRTC */
226 num_connectors = get_connectors_for_crtc(crtc, NULL, 0);
227 BUG_ON(num_connectors == 0);
228 connector_list = kcalloc(num_connectors, sizeof(*connector_list),
229 GFP_KERNEL);
230 if (!connector_list)
231 return -ENOMEM;
232 get_connectors_for_crtc(crtc, connector_list, num_connectors);
233
234 set.connectors = connector_list;
235 set.num_connectors = num_connectors;
236
237 /*
238 * We call set_config() directly here rather than using
239 * drm_mode_set_config_internal. We're reprogramming the same
240 * connectors that were already in use, so we shouldn't need the extra
241 * cross-CRTC fb refcounting to accommodate stealing connectors.
242 * drm_mode_setplane() already handles the basic refcounting for the
243 * framebuffers involved in this operation.
244 */
245 ret = crtc->funcs->set_config(&set, ctx);
246
247 kfree(connector_list);
248 return ret;
249}
250EXPORT_SYMBOL(drm_plane_helper_update_primary);
251
252/**
253 * drm_plane_helper_disable_primary - Helper for disabling primary planes
254 * @plane: plane to disable
255 * @ctx: modeset locking context
256 *
257 * This helper returns an error when trying to disable the primary
258 * plane.
259 *
260 * This function is only useful for non-atomic modesetting. Don't use
261 * it in new drivers.
262 *
263 * Returns:
264 * An errno code.
265 */
266int drm_plane_helper_disable_primary(struct drm_plane *plane,
267 struct drm_modeset_acquire_ctx *ctx)
268{
269 struct drm_device *dev = plane->dev;
270
271 drm_WARN_ON_ONCE(dev, drm_drv_uses_atomic_modeset(dev));
272
273 return -EINVAL;
274}
275EXPORT_SYMBOL(drm_plane_helper_disable_primary);
276
277/**
278 * drm_plane_helper_destroy() - Helper for primary plane destruction
279 * @plane: plane to destroy
280 *
281 * Provides a default plane destroy handler for primary planes. This handler
282 * is called during CRTC destruction. We disable the primary plane, remove
283 * it from the DRM plane list, and deallocate the plane structure.
284 */
285void drm_plane_helper_destroy(struct drm_plane *plane)
286{
287 drm_plane_cleanup(plane);
288 kfree(plane);
289}
290EXPORT_SYMBOL(drm_plane_helper_destroy);
291
292/**
293 * drm_plane_helper_atomic_check() - Helper to check plane atomic-state
294 * @plane: plane to check
295 * @state: atomic state object
296 *
297 * Provides a default plane-state check handler for planes whose atomic-state
298 * scale and positioning are not expected to change since the plane is always
299 * a fullscreen scanout buffer.
300 *
301 * This is often the case for the primary plane of simple framebuffers. See
302 * also drm_crtc_helper_atomic_check() for the respective CRTC-state check
303 * helper function.
304 *
305 * RETURNS:
306 * Zero on success, or an errno code otherwise.
307 */
308int drm_plane_helper_atomic_check(struct drm_plane *plane, struct drm_atomic_state *state)
309{
310 struct drm_plane_state *new_plane_state = drm_atomic_get_new_plane_state(state, plane);
311 struct drm_crtc *new_crtc = new_plane_state->crtc;
312 struct drm_crtc_state *new_crtc_state = NULL;
313
314 if (new_crtc)
315 new_crtc_state = drm_atomic_get_new_crtc_state(state, new_crtc);
316
317 return drm_atomic_helper_check_plane_state(new_plane_state, new_crtc_state,
318 DRM_PLANE_NO_SCALING,
319 DRM_PLANE_NO_SCALING,
320 false, false);
321}
322EXPORT_SYMBOL(drm_plane_helper_atomic_check);