Loading...
1/*
2 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
3 *
4 * Copyright (C) 2015 Atmel,
5 * 2015 Josh Wu <josh.wu@atmel.com>
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 *
12 * a) This file is free software; you can redistribute it and/or
13 * modify it under the terms of the GNU General Public License as
14 * published by the Free Software Foundation; either version 2 of the
15 * License, or (at your option) any later version.
16 *
17 * This file is distributed in the hope that it will be useful,
18 * but WITHOUT ANY WARRANTY; without even the implied warranty of
19 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
20 * GNU General Public License for more details.
21 *
22 * Or, alternatively,
23 *
24 * b) Permission is hereby granted, free of charge, to any person
25 * obtaining a copy of this software and associated documentation
26 * files (the "Software"), to deal in the Software without
27 * restriction, including without limitation the rights to use,
28 * copy, modify, merge, publish, distribute, sublicense, and/or
29 * sell copies of the Software, and to permit persons to whom the
30 * Software is furnished to do so, subject to the following
31 * conditions:
32 *
33 * The above copyright notice and this permission notice shall be
34 * included in all copies or substantial portions of the Software.
35 *
36 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
37 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
38 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
39 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
40 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
41 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
42 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
43 * OTHER DEALINGS IN THE SOFTWARE.
44 */
45/dts-v1/;
46#include "sama5d4.dtsi"
47
48/ {
49 model = "Atmel SAMA5D4 Xplained";
50 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
51
52 chosen {
53 stdout-path = "serial0:115200n8";
54 };
55
56 memory {
57 reg = <0x20000000 0x20000000>;
58 };
59
60 clocks {
61 slow_xtal {
62 clock-frequency = <32768>;
63 };
64
65 main_xtal {
66 clock-frequency = <12000000>;
67 };
68 };
69
70 ahb {
71 apb {
72 uart0: serial@f8004000 {
73 atmel,use-dma-rx;
74 atmel,use-dma-tx;
75 status = "okay";
76 };
77
78 spi0: spi@f8010000 {
79 cs-gpios = <&pioC 3 0>, <0>, <0>, <0>;
80 status = "okay";
81 m25p80@0 {
82 compatible = "atmel,at25df321a";
83 spi-max-frequency = <50000000>;
84 reg = <0>;
85 };
86 };
87
88 i2c0: i2c@f8014000 {
89 status = "okay";
90 };
91
92 macb0: ethernet@f8020000 {
93 phy-mode = "rmii";
94 status = "okay";
95 pinctrl-names = "default";
96 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
97
98 phy0: ethernet-phy@1 {
99 interrupt-parent = <&pioE>;
100 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
101 reg = <1>;
102 };
103 };
104
105 mmc1: mmc@fc000000 {
106 pinctrl-names = "default";
107 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
108 vmmc-supply = <&vcc_mmc1_reg>;
109 vqmmc-supply = <&vcc_3v3_reg>;
110 status = "okay";
111 slot@0 {
112 reg = <0>;
113 bus-width = <4>;
114 cd-gpios = <&pioE 3 0>;
115 };
116 };
117
118 usart3: serial@fc00c000 {
119 atmel,use-dma-rx;
120 atmel,use-dma-tx;
121 status = "okay";
122 };
123
124 usart4: serial@fc010000 {
125 status = "okay";
126 };
127
128 spi1: spi@fc018000 {
129 cs-gpios = <&pioB 21 0>;
130 status = "okay";
131 };
132
133 tcb2: timer@fc024000 {
134 timer0: timer@0 {
135 compatible = "atmel,tcb-timer";
136 reg = <0>;
137 };
138
139 timer1: timer@1 {
140 compatible = "atmel,tcb-timer";
141 reg = <1>;
142 };
143 };
144
145 adc0: adc@fc034000 {
146 pinctrl-names = "default";
147 pinctrl-0 = <
148 /* external trigger conflicts with USBA_VBUS */
149 &pinctrl_adc0_ad0
150 &pinctrl_adc0_ad1
151 &pinctrl_adc0_ad2
152 &pinctrl_adc0_ad3
153 &pinctrl_adc0_ad4
154 >;
155 atmel,adc-vref = <3300>;
156 status = "okay";
157 };
158
159 watchdog@fc068640 {
160 status = "okay";
161 };
162
163 pinctrl@fc06a000 {
164 board {
165 pinctrl_mmc1_cd: mmc1_cd {
166 atmel,pins =
167 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
168 };
169 pinctrl_usba_vbus: usba_vbus {
170 atmel,pins =
171 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
172 };
173 pinctrl_key_gpio: key_gpio_0 {
174 atmel,pins =
175 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
176 };
177 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
178 atmel,pins =
179 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
180 };
181 };
182 };
183 };
184
185 usb0: gadget@400000 {
186 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
187 pinctrl-names = "default";
188 pinctrl-0 = <&pinctrl_usba_vbus>;
189 status = "okay";
190 };
191
192 usb1: ohci@500000 {
193 num-ports = <3>;
194 atmel,vbus-gpio = <0
195 &pioE 11 GPIO_ACTIVE_HIGH
196 &pioE 14 GPIO_ACTIVE_HIGH
197 >;
198 status = "okay";
199 };
200
201 usb2: ehci@600000 {
202 status = "okay";
203 };
204
205 ebi: ebi@10000000 {
206 pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
207 &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
208 &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
209 pinctrl-names = "default";
210 status = "okay";
211
212 nand_controller: nand-controller {
213 status = "okay";
214
215 nand@3 {
216 reg = <0x3 0x0 0x2>;
217 atmel,rb = <0>;
218 nand-bus-width = <8>;
219 nand-ecc-mode = "hw";
220 nand-on-flash-bbt;
221 label = "atmel_nand";
222
223 partitions {
224 compatible = "fixed-partitions";
225 #address-cells = <1>;
226 #size-cells = <1>;
227
228 at91bootstrap@0 {
229 label = "at91bootstrap";
230 reg = <0x0 0x40000>;
231 };
232
233 bootloader@40000 {
234 label = "bootloader";
235 reg = <0x40000 0x80000>;
236 };
237
238 bootloaderenv@c0000 {
239 label = "bootloader env";
240 reg = <0xc0000 0xc0000>;
241 };
242
243 dtb@180000 {
244 label = "device tree";
245 reg = <0x180000 0x80000>;
246 };
247
248 kernel@200000 {
249 label = "kernel";
250 reg = <0x200000 0x600000>;
251 };
252
253 rootfs@800000 {
254 label = "rootfs";
255 reg = <0x800000 0x0f800000>;
256 };
257 };
258 };
259 };
260 };
261 };
262
263 gpio_keys {
264 compatible = "gpio-keys";
265
266 pinctrl-names = "default";
267 pinctrl-0 = <&pinctrl_key_gpio>;
268
269 pb_user1 {
270 label = "pb_user1";
271 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
272 linux,code = <0x100>;
273 wakeup-source;
274 };
275 };
276
277 leds {
278 compatible = "gpio-leds";
279 status = "okay";
280
281 d8 {
282 label = "d8";
283 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
284 default-state = "on";
285 };
286
287 d10 {
288 label = "d10";
289 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
290 linux,default-trigger = "heartbeat";
291 };
292 };
293
294 vcc_3v3_reg: fixedregulator_3v3 {
295 compatible = "regulator-fixed";
296 regulator-name = "VCC 3V3";
297 regulator-min-microvolt = <3300000>;
298 regulator-max-microvolt = <3300000>;
299 regulator-boot-on;
300 regulator-always-on;
301 };
302
303 vcc_mmc1_reg: fixedregulator_mmc1 {
304 compatible = "regulator-fixed";
305 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
306 regulator-name = "VDD MCI1";
307 regulator-min-microvolt = <3300000>;
308 regulator-max-microvolt = <3300000>;
309 vin-supply = <&vcc_3v3_reg>;
310 regulator-always-on;
311 };
312};
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * at91-sama5d4_xplained.dts - Device Tree file for SAMA5D4 Xplained board
4 *
5 * Copyright (C) 2015 Atmel,
6 * 2015 Josh Wu <josh.wu@atmel.com>
7 */
8/dts-v1/;
9#include "sama5d4.dtsi"
10#include <dt-bindings/input/input.h>
11
12/ {
13 model = "Atmel SAMA5D4 Xplained";
14 compatible = "atmel,sama5d4-xplained", "atmel,sama5d4", "atmel,sama5";
15
16 chosen {
17 stdout-path = "serial0:115200n8";
18 };
19
20 memory@20000000 {
21 reg = <0x20000000 0x20000000>;
22 };
23
24 clocks {
25 slow_xtal {
26 clock-frequency = <32768>;
27 };
28
29 main_xtal {
30 clock-frequency = <12000000>;
31 };
32 };
33
34 ahb {
35 apb {
36 uart0: serial@f8004000 {
37 atmel,use-dma-rx;
38 atmel,use-dma-tx;
39 status = "okay";
40 };
41
42 i2c0: i2c@f8014000 {
43 i2c-digital-filter;
44 status = "okay";
45 };
46
47 macb0: ethernet@f8020000 {
48 phy-mode = "rmii";
49 status = "okay";
50 pinctrl-names = "default";
51 pinctrl-0 = <&pinctrl_macb0_rmii &pinctrl_macb0_phy_irq>;
52
53 phy0: ethernet-phy@1 {
54 interrupt-parent = <&pioE>;
55 interrupts = <1 IRQ_TYPE_LEVEL_LOW>;
56 reg = <1>;
57 };
58 };
59
60 mmc1: mmc@fc000000 {
61 pinctrl-names = "default";
62 pinctrl-0 = <&pinctrl_mmc1_clk_cmd_dat0 &pinctrl_mmc1_dat1_3 &pinctrl_mmc1_cd>;
63 vmmc-supply = <&vcc_mmc1_reg>;
64 vqmmc-supply = <&vcc_3v3_reg>;
65 status = "okay";
66 slot@0 {
67 reg = <0>;
68 bus-width = <4>;
69 cd-gpios = <&pioE 3 0>;
70 };
71 };
72
73 usart3: serial@fc00c000 {
74 atmel,use-dma-rx;
75 atmel,use-dma-tx;
76 status = "okay";
77 };
78
79 usart4: serial@fc010000 {
80 status = "okay";
81 };
82
83 spi1: spi@fc018000 {
84 pinctrl-names = "default", "cs";
85 pinctrl-1 = <&pinctrl_spi1_cs>;
86 cs-gpios = <&pioB 21 0>;
87 status = "okay";
88 };
89
90 tcb2: timer@fc024000 {
91 timer0: timer@0 {
92 compatible = "atmel,tcb-timer";
93 reg = <0>;
94 };
95
96 timer1: timer@1 {
97 compatible = "atmel,tcb-timer";
98 reg = <1>;
99 };
100 };
101
102 adc0: adc@fc034000 {
103 pinctrl-names = "default";
104 pinctrl-0 = <
105 /* external trigger conflicts with USBA_VBUS */
106 &pinctrl_adc0_ad0
107 &pinctrl_adc0_ad1
108 &pinctrl_adc0_ad2
109 &pinctrl_adc0_ad3
110 &pinctrl_adc0_ad4
111 >;
112 atmel,adc-vref = <3300>;
113 status = "okay";
114 };
115
116 watchdog@fc068640 {
117 status = "okay";
118 };
119
120 pinctrl@fc06a000 {
121 board {
122 pinctrl_mmc1_cd: mmc1_cd {
123 atmel,pins =
124 <AT91_PIOE 3 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
125 };
126 pinctrl_usba_vbus: usba_vbus {
127 atmel,pins =
128 <AT91_PIOE 31 AT91_PERIPH_GPIO AT91_PINCTRL_DEGLITCH>;
129 };
130 pinctrl_usb_default: usb_default {
131 atmel,pins =
132 <AT91_PIOE 11 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
133 AT91_PIOE 14 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
134 };
135 pinctrl_key_gpio: key_gpio_0 {
136 atmel,pins =
137 <AT91_PIOE 8 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
138 };
139 pinctrl_macb0_phy_irq: macb0_phy_irq_0 {
140 atmel,pins =
141 <AT91_PIOE 1 AT91_PERIPH_GPIO AT91_PINCTRL_PULL_UP_DEGLITCH>;
142 };
143 pinctrl_spi1_cs: spi1_cs_default {
144 atmel,pins =
145 <AT91_PIOB 21 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
146 };
147 pinctrl_gpio_leds: gpio_leds_default {
148 atmel,pins =
149 <AT91_PIOD 30 AT91_PERIPH_GPIO AT91_PINCTRL_NONE
150 AT91_PIOE 15 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
151 };
152 pinctrl_vcc_mmc1_reg: vcc_mmc1_reg {
153 atmel,pins =
154 <AT91_PIOE 4 AT91_PERIPH_GPIO AT91_PINCTRL_NONE>;
155 };
156 };
157 };
158 };
159
160 usb0: gadget@400000 {
161 atmel,vbus-gpio = <&pioE 31 GPIO_ACTIVE_HIGH>;
162 pinctrl-names = "default";
163 pinctrl-0 = <&pinctrl_usba_vbus>;
164 status = "okay";
165 };
166
167 usb1: ohci@500000 {
168 num-ports = <3>;
169 atmel,vbus-gpio = <0
170 &pioE 11 GPIO_ACTIVE_HIGH
171 &pioE 14 GPIO_ACTIVE_HIGH
172 >;
173 pinctrl-names = "default";
174 pinctrl-0 = <&pinctrl_usb_default>;
175 status = "okay";
176 };
177
178 usb2: ehci@600000 {
179 status = "okay";
180 };
181
182 ebi: ebi@10000000 {
183 pinctrl-0 = <&pinctrl_ebi_cs3 &pinctrl_ebi_nrd_nandoe
184 &pinctrl_ebi_nwe_nandwe &pinctrl_ebi_nandrdy
185 &pinctrl_ebi_data_0_7 &pinctrl_ebi_nand_addr>;
186 pinctrl-names = "default";
187 status = "okay";
188
189 nand_controller: nand-controller {
190 status = "okay";
191
192 nand@3 {
193 reg = <0x3 0x0 0x2>;
194 atmel,rb = <0>;
195 nand-bus-width = <8>;
196 nand-ecc-mode = "hw";
197 nand-on-flash-bbt;
198 label = "atmel_nand";
199
200 partitions {
201 compatible = "fixed-partitions";
202 #address-cells = <1>;
203 #size-cells = <1>;
204
205 at91bootstrap@0 {
206 label = "at91bootstrap";
207 reg = <0x0 0x40000>;
208 };
209
210 bootloader@40000 {
211 label = "bootloader";
212 reg = <0x40000 0xc0000>;
213 };
214
215 bootloaderenvred@100000 {
216 label = "bootloader env redundant";
217 reg = <0x100000 0x40000>;
218 };
219
220 bootloaderenv@140000 {
221 label = "bootloader env";
222 reg = <0x140000 0x40000>;
223 };
224
225 dtb@180000 {
226 label = "device tree";
227 reg = <0x180000 0x80000>;
228 };
229
230 kernel@200000 {
231 label = "kernel";
232 reg = <0x200000 0x600000>;
233 };
234
235 rootfs@800000 {
236 label = "rootfs";
237 reg = <0x800000 0x1f800000>;
238 };
239 };
240 };
241 };
242 };
243 };
244
245 gpio-keys {
246 compatible = "gpio-keys";
247
248 pinctrl-names = "default";
249 pinctrl-0 = <&pinctrl_key_gpio>;
250
251 button {
252 label = "pb_user1";
253 gpios = <&pioE 8 GPIO_ACTIVE_HIGH>;
254 linux,code = <KEY_PROG1>;
255 wakeup-source;
256 };
257 };
258
259 leds {
260 compatible = "gpio-leds";
261 pinctrl-names = "default";
262 pinctrl-0 = <&pinctrl_gpio_leds>;
263 status = "okay";
264
265 d8 {
266 label = "d8";
267 gpios = <&pioD 30 GPIO_ACTIVE_HIGH>;
268 default-state = "on";
269 };
270
271 d10 {
272 label = "d10";
273 gpios = <&pioE 15 GPIO_ACTIVE_LOW>;
274 linux,default-trigger = "heartbeat";
275 };
276 };
277
278 vcc_3v3_reg: fixedregulator_3v3 {
279 compatible = "regulator-fixed";
280 regulator-name = "VCC 3V3";
281 regulator-min-microvolt = <3300000>;
282 regulator-max-microvolt = <3300000>;
283 regulator-boot-on;
284 regulator-always-on;
285 };
286
287 vcc_mmc1_reg: fixedregulator_mmc1 {
288 compatible = "regulator-fixed";
289 pinctrl-names = "default";
290 pinctrl-0 = <&pinctrl_vcc_mmc1_reg>;
291 gpio = <&pioE 4 GPIO_ACTIVE_LOW>;
292 regulator-name = "VDD MCI1";
293 regulator-min-microvolt = <3300000>;
294 regulator-max-microvolt = <3300000>;
295 vin-supply = <&vcc_3v3_reg>;
296 regulator-always-on;
297 };
298};