Loading...
1config HAVE_NET_DSA
2 def_bool y
3 depends on INET && NETDEVICES && !S390
4
5# Drivers must select NET_DSA and the appropriate tagging format
6
7config NET_DSA
8 tristate "Distributed Switch Architecture"
9 depends on HAVE_NET_DSA && MAY_USE_DEVLINK
10 depends on BRIDGE || BRIDGE=n
11 select NET_SWITCHDEV
12 select PHYLIB
13 ---help---
14 Say Y if you want to enable support for the hardware switches supported
15 by the Distributed Switch Architecture.
16
17if NET_DSA
18
19config NET_DSA_LEGACY
20 bool "Support for older platform device and Device Tree registration"
21 default y
22 ---help---
23 Say Y if you want to enable support for the older platform device and
24 deprecated Device Tree binding registration.
25
26 This feature is scheduled for removal in 4.17.
27
28# tagging formats
29config NET_DSA_TAG_BRCM
30 bool
31
32config NET_DSA_TAG_BRCM_PREPEND
33 bool
34
35config NET_DSA_TAG_DSA
36 bool
37
38config NET_DSA_TAG_EDSA
39 bool
40
41config NET_DSA_TAG_KSZ
42 bool
43
44config NET_DSA_TAG_LAN9303
45 bool
46
47config NET_DSA_TAG_MTK
48 bool
49
50config NET_DSA_TAG_TRAILER
51 bool
52
53config NET_DSA_TAG_QCA
54 bool
55
56endif
1# SPDX-License-Identifier: GPL-2.0-only
2
3menuconfig NET_DSA
4 tristate "Distributed Switch Architecture"
5 depends on BRIDGE || BRIDGE=n
6 depends on HSR || HSR=n
7 depends on INET && NETDEVICES
8 select GRO_CELLS
9 select NET_SWITCHDEV
10 select PHYLINK
11 select NET_DEVLINK
12 imply NET_SELFTESTS
13 help
14 Say Y if you want to enable support for the hardware switches supported
15 by the Distributed Switch Architecture.
16
17if NET_DSA
18
19# Drivers must select the appropriate tagging format(s)
20
21config NET_DSA_TAG_NONE
22 tristate "No-op tag driver"
23 help
24 Say Y or M if you want to enable support for switches which don't tag
25 frames over the CPU port.
26
27config NET_DSA_TAG_AR9331
28 tristate "Tag driver for Atheros AR9331 SoC with built-in switch"
29 help
30 Say Y or M if you want to enable support for tagging frames for
31 the Atheros AR9331 SoC with built-in switch.
32
33config NET_DSA_TAG_BRCM_COMMON
34 tristate
35 default n
36
37config NET_DSA_TAG_BRCM
38 tristate "Tag driver for Broadcom switches using in-frame headers"
39 select NET_DSA_TAG_BRCM_COMMON
40 help
41 Say Y if you want to enable support for tagging frames for the
42 Broadcom switches which place the tag after the MAC source address.
43
44config NET_DSA_TAG_BRCM_LEGACY
45 tristate "Tag driver for Broadcom legacy switches using in-frame headers"
46 select NET_DSA_TAG_BRCM_COMMON
47 help
48 Say Y if you want to enable support for tagging frames for the
49 Broadcom legacy switches which place the tag after the MAC source
50 address.
51
52config NET_DSA_TAG_BRCM_PREPEND
53 tristate "Tag driver for Broadcom switches using prepended headers"
54 select NET_DSA_TAG_BRCM_COMMON
55 help
56 Say Y if you want to enable support for tagging frames for the
57 Broadcom switches which places the tag before the Ethernet header
58 (prepended).
59
60config NET_DSA_TAG_HELLCREEK
61 tristate "Tag driver for Hirschmann Hellcreek TSN switches"
62 help
63 Say Y or M if you want to enable support for tagging frames
64 for the Hirschmann Hellcreek TSN switches.
65
66config NET_DSA_TAG_GSWIP
67 tristate "Tag driver for Lantiq / Intel GSWIP switches"
68 help
69 Say Y or M if you want to enable support for tagging frames for the
70 Lantiq / Intel GSWIP switches.
71
72config NET_DSA_TAG_DSA_COMMON
73 tristate
74
75config NET_DSA_TAG_DSA
76 tristate "Tag driver for Marvell switches using DSA headers"
77 select NET_DSA_TAG_DSA_COMMON
78 help
79 Say Y or M if you want to enable support for tagging frames for the
80 Marvell switches which use DSA headers.
81
82config NET_DSA_TAG_EDSA
83 tristate "Tag driver for Marvell switches using EtherType DSA headers"
84 select NET_DSA_TAG_DSA_COMMON
85 help
86 Say Y or M if you want to enable support for tagging frames for the
87 Marvell switches which use EtherType DSA headers.
88
89config NET_DSA_TAG_MTK
90 tristate "Tag driver for Mediatek switches"
91 help
92 Say Y or M if you want to enable support for tagging frames for
93 Mediatek switches.
94
95config NET_DSA_TAG_KSZ
96 tristate "Tag driver for Microchip 8795/937x/9477/9893 families of switches"
97 help
98 Say Y if you want to enable support for tagging frames for the
99 Microchip 8795/937x/9477/9893 families of switches.
100
101config NET_DSA_TAG_OCELOT
102 tristate "Tag driver for Ocelot family of switches, using NPI port"
103 select PACKING
104 help
105 Say Y or M if you want to enable NPI tagging for the Ocelot switches
106 (VSC7511, VSC7512, VSC7513, VSC7514, VSC9953, VSC9959). In this mode,
107 the frames over the Ethernet CPU port are prepended with a
108 hardware-defined injection/extraction frame header. Flow control
109 (PAUSE frames) over the CPU port is not supported when operating in
110 this mode.
111
112config NET_DSA_TAG_OCELOT_8021Q
113 tristate "Tag driver for Ocelot family of switches, using VLAN"
114 help
115 Say Y or M if you want to enable support for tagging frames with a
116 custom VLAN-based header. Frames that require timestamping, such as
117 PTP, are not delivered over Ethernet but over register-based MMIO.
118 Flow control over the CPU port is functional in this mode. When using
119 this mode, less TCAM resources (VCAP IS1, IS2, ES0) are available for
120 use with tc-flower.
121
122config NET_DSA_TAG_QCA
123 tristate "Tag driver for Qualcomm Atheros QCA8K switches"
124 help
125 Say Y or M if you want to enable support for tagging frames for
126 the Qualcomm Atheros QCA8K switches.
127
128config NET_DSA_TAG_RTL4_A
129 tristate "Tag driver for Realtek 4 byte protocol A tags"
130 help
131 Say Y or M if you want to enable support for tagging frames for the
132 Realtek switches with 4 byte protocol A tags, such as found in
133 the Realtek RTL8366RB.
134
135config NET_DSA_TAG_RTL8_4
136 tristate "Tag driver for Realtek 8 byte protocol 4 tags"
137 help
138 Say Y or M if you want to enable support for tagging frames for Realtek
139 switches with 8 byte protocol 4 tags, such as the Realtek RTL8365MB-VC.
140
141config NET_DSA_TAG_RZN1_A5PSW
142 tristate "Tag driver for Renesas RZ/N1 A5PSW switch"
143 help
144 Say Y or M if you want to enable support for tagging frames for
145 Renesas RZ/N1 embedded switch that uses an 8 byte tag located after
146 destination MAC address.
147
148config NET_DSA_TAG_LAN9303
149 tristate "Tag driver for SMSC/Microchip LAN9303 family of switches"
150 help
151 Say Y or M if you want to enable support for tagging frames for the
152 SMSC/Microchip LAN9303 family of switches.
153
154config NET_DSA_TAG_SJA1105
155 tristate "Tag driver for NXP SJA1105 switches"
156 select PACKING
157 help
158 Say Y or M if you want to enable support for tagging frames with the
159 NXP SJA1105 switch family. Both the native tagging protocol (which
160 is only for link-local traffic) as well as non-native tagging (based
161 on a custom 802.1Q VLAN header) are available.
162
163config NET_DSA_TAG_TRAILER
164 tristate "Tag driver for switches using a trailer tag"
165 help
166 Say Y or M if you want to enable support for tagging frames at
167 with a trailed. e.g. Marvell 88E6060.
168
169config NET_DSA_TAG_VSC73XX_8021Q
170 tristate "Tag driver for Microchip/Vitesse VSC73xx family of switches, using VLAN"
171 help
172 Say Y or M if you want to enable support for tagging frames with a
173 custom VLAN-based header.
174
175config NET_DSA_TAG_XRS700X
176 tristate "Tag driver for XRS700x switches"
177 help
178 Say Y or M if you want to enable support for tagging frames for
179 Arrow SpeedChips XRS700x switches that use a single byte tag trailer.
180
181endif