Loading...
1/*
2 * Linux VM pressure
3 *
4 * Copyright 2012 Linaro Ltd.
5 * Anton Vorontsov <anton.vorontsov@linaro.org>
6 *
7 * Based on ideas from Andrew Morton, David Rientjes, KOSAKI Motohiro,
8 * Leonid Moiseichuk, Mel Gorman, Minchan Kim and Pekka Enberg.
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License version 2 as published
12 * by the Free Software Foundation.
13 */
14
15#include <linux/cgroup.h>
16#include <linux/fs.h>
17#include <linux/log2.h>
18#include <linux/sched.h>
19#include <linux/mm.h>
20#include <linux/vmstat.h>
21#include <linux/eventfd.h>
22#include <linux/slab.h>
23#include <linux/swap.h>
24#include <linux/printk.h>
25#include <linux/vmpressure.h>
26
27/*
28 * The window size (vmpressure_win) is the number of scanned pages before
29 * we try to analyze scanned/reclaimed ratio. So the window is used as a
30 * rate-limit tunable for the "low" level notification, and also for
31 * averaging the ratio for medium/critical levels. Using small window
32 * sizes can cause lot of false positives, but too big window size will
33 * delay the notifications.
34 *
35 * As the vmscan reclaimer logic works with chunks which are multiple of
36 * SWAP_CLUSTER_MAX, it makes sense to use it for the window size as well.
37 *
38 * TODO: Make the window size depend on machine size, as we do for vmstat
39 * thresholds. Currently we set it to 512 pages (2MB for 4KB pages).
40 */
41static const unsigned long vmpressure_win = SWAP_CLUSTER_MAX * 16;
42
43/*
44 * These thresholds are used when we account memory pressure through
45 * scanned/reclaimed ratio. The current values were chosen empirically. In
46 * essence, they are percents: the higher the value, the more number
47 * unsuccessful reclaims there were.
48 */
49static const unsigned int vmpressure_level_med = 60;
50static const unsigned int vmpressure_level_critical = 95;
51
52/*
53 * When there are too little pages left to scan, vmpressure() may miss the
54 * critical pressure as number of pages will be less than "window size".
55 * However, in that case the vmscan priority will raise fast as the
56 * reclaimer will try to scan LRUs more deeply.
57 *
58 * The vmscan logic considers these special priorities:
59 *
60 * prio == DEF_PRIORITY (12): reclaimer starts with that value
61 * prio <= DEF_PRIORITY - 2 : kswapd becomes somewhat overwhelmed
62 * prio == 0 : close to OOM, kernel scans every page in an lru
63 *
64 * Any value in this range is acceptable for this tunable (i.e. from 12 to
65 * 0). Current value for the vmpressure_level_critical_prio is chosen
66 * empirically, but the number, in essence, means that we consider
67 * critical level when scanning depth is ~10% of the lru size (vmscan
68 * scans 'lru_size >> prio' pages, so it is actually 12.5%, or one
69 * eights).
70 */
71static const unsigned int vmpressure_level_critical_prio = ilog2(100 / 10);
72
73static struct vmpressure *work_to_vmpressure(struct work_struct *work)
74{
75 return container_of(work, struct vmpressure, work);
76}
77
78static struct vmpressure *vmpressure_parent(struct vmpressure *vmpr)
79{
80 struct cgroup_subsys_state *css = vmpressure_to_css(vmpr);
81 struct mem_cgroup *memcg = mem_cgroup_from_css(css);
82
83 memcg = parent_mem_cgroup(memcg);
84 if (!memcg)
85 return NULL;
86 return memcg_to_vmpressure(memcg);
87}
88
89enum vmpressure_levels {
90 VMPRESSURE_LOW = 0,
91 VMPRESSURE_MEDIUM,
92 VMPRESSURE_CRITICAL,
93 VMPRESSURE_NUM_LEVELS,
94};
95
96enum vmpressure_modes {
97 VMPRESSURE_NO_PASSTHROUGH = 0,
98 VMPRESSURE_HIERARCHY,
99 VMPRESSURE_LOCAL,
100 VMPRESSURE_NUM_MODES,
101};
102
103static const char * const vmpressure_str_levels[] = {
104 [VMPRESSURE_LOW] = "low",
105 [VMPRESSURE_MEDIUM] = "medium",
106 [VMPRESSURE_CRITICAL] = "critical",
107};
108
109static const char * const vmpressure_str_modes[] = {
110 [VMPRESSURE_NO_PASSTHROUGH] = "default",
111 [VMPRESSURE_HIERARCHY] = "hierarchy",
112 [VMPRESSURE_LOCAL] = "local",
113};
114
115static enum vmpressure_levels vmpressure_level(unsigned long pressure)
116{
117 if (pressure >= vmpressure_level_critical)
118 return VMPRESSURE_CRITICAL;
119 else if (pressure >= vmpressure_level_med)
120 return VMPRESSURE_MEDIUM;
121 return VMPRESSURE_LOW;
122}
123
124static enum vmpressure_levels vmpressure_calc_level(unsigned long scanned,
125 unsigned long reclaimed)
126{
127 unsigned long scale = scanned + reclaimed;
128 unsigned long pressure = 0;
129
130 /*
131 * reclaimed can be greater than scanned for things such as reclaimed
132 * slab pages. shrink_node() just adds reclaimed pages without a
133 * related increment to scanned pages.
134 */
135 if (reclaimed >= scanned)
136 goto out;
137 /*
138 * We calculate the ratio (in percents) of how many pages were
139 * scanned vs. reclaimed in a given time frame (window). Note that
140 * time is in VM reclaimer's "ticks", i.e. number of pages
141 * scanned. This makes it possible to set desired reaction time
142 * and serves as a ratelimit.
143 */
144 pressure = scale - (reclaimed * scale / scanned);
145 pressure = pressure * 100 / scale;
146
147out:
148 pr_debug("%s: %3lu (s: %lu r: %lu)\n", __func__, pressure,
149 scanned, reclaimed);
150
151 return vmpressure_level(pressure);
152}
153
154struct vmpressure_event {
155 struct eventfd_ctx *efd;
156 enum vmpressure_levels level;
157 enum vmpressure_modes mode;
158 struct list_head node;
159};
160
161static bool vmpressure_event(struct vmpressure *vmpr,
162 const enum vmpressure_levels level,
163 bool ancestor, bool signalled)
164{
165 struct vmpressure_event *ev;
166 bool ret = false;
167
168 mutex_lock(&vmpr->events_lock);
169 list_for_each_entry(ev, &vmpr->events, node) {
170 if (ancestor && ev->mode == VMPRESSURE_LOCAL)
171 continue;
172 if (signalled && ev->mode == VMPRESSURE_NO_PASSTHROUGH)
173 continue;
174 if (level < ev->level)
175 continue;
176 eventfd_signal(ev->efd, 1);
177 ret = true;
178 }
179 mutex_unlock(&vmpr->events_lock);
180
181 return ret;
182}
183
184static void vmpressure_work_fn(struct work_struct *work)
185{
186 struct vmpressure *vmpr = work_to_vmpressure(work);
187 unsigned long scanned;
188 unsigned long reclaimed;
189 enum vmpressure_levels level;
190 bool ancestor = false;
191 bool signalled = false;
192
193 spin_lock(&vmpr->sr_lock);
194 /*
195 * Several contexts might be calling vmpressure(), so it is
196 * possible that the work was rescheduled again before the old
197 * work context cleared the counters. In that case we will run
198 * just after the old work returns, but then scanned might be zero
199 * here. No need for any locks here since we don't care if
200 * vmpr->reclaimed is in sync.
201 */
202 scanned = vmpr->tree_scanned;
203 if (!scanned) {
204 spin_unlock(&vmpr->sr_lock);
205 return;
206 }
207
208 reclaimed = vmpr->tree_reclaimed;
209 vmpr->tree_scanned = 0;
210 vmpr->tree_reclaimed = 0;
211 spin_unlock(&vmpr->sr_lock);
212
213 level = vmpressure_calc_level(scanned, reclaimed);
214
215 do {
216 if (vmpressure_event(vmpr, level, ancestor, signalled))
217 signalled = true;
218 ancestor = true;
219 } while ((vmpr = vmpressure_parent(vmpr)));
220}
221
222/**
223 * vmpressure() - Account memory pressure through scanned/reclaimed ratio
224 * @gfp: reclaimer's gfp mask
225 * @memcg: cgroup memory controller handle
226 * @tree: legacy subtree mode
227 * @scanned: number of pages scanned
228 * @reclaimed: number of pages reclaimed
229 *
230 * This function should be called from the vmscan reclaim path to account
231 * "instantaneous" memory pressure (scanned/reclaimed ratio). The raw
232 * pressure index is then further refined and averaged over time.
233 *
234 * If @tree is set, vmpressure is in traditional userspace reporting
235 * mode: @memcg is considered the pressure root and userspace is
236 * notified of the entire subtree's reclaim efficiency.
237 *
238 * If @tree is not set, reclaim efficiency is recorded for @memcg, and
239 * only in-kernel users are notified.
240 *
241 * This function does not return any value.
242 */
243void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
244 unsigned long scanned, unsigned long reclaimed)
245{
246 struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
247
248 /*
249 * Here we only want to account pressure that userland is able to
250 * help us with. For example, suppose that DMA zone is under
251 * pressure; if we notify userland about that kind of pressure,
252 * then it will be mostly a waste as it will trigger unnecessary
253 * freeing of memory by userland (since userland is more likely to
254 * have HIGHMEM/MOVABLE pages instead of the DMA fallback). That
255 * is why we include only movable, highmem and FS/IO pages.
256 * Indirect reclaim (kswapd) sets sc->gfp_mask to GFP_KERNEL, so
257 * we account it too.
258 */
259 if (!(gfp & (__GFP_HIGHMEM | __GFP_MOVABLE | __GFP_IO | __GFP_FS)))
260 return;
261
262 /*
263 * If we got here with no pages scanned, then that is an indicator
264 * that reclaimer was unable to find any shrinkable LRUs at the
265 * current scanning depth. But it does not mean that we should
266 * report the critical pressure, yet. If the scanning priority
267 * (scanning depth) goes too high (deep), we will be notified
268 * through vmpressure_prio(). But so far, keep calm.
269 */
270 if (!scanned)
271 return;
272
273 if (tree) {
274 spin_lock(&vmpr->sr_lock);
275 scanned = vmpr->tree_scanned += scanned;
276 vmpr->tree_reclaimed += reclaimed;
277 spin_unlock(&vmpr->sr_lock);
278
279 if (scanned < vmpressure_win)
280 return;
281 schedule_work(&vmpr->work);
282 } else {
283 enum vmpressure_levels level;
284
285 /* For now, no users for root-level efficiency */
286 if (!memcg || memcg == root_mem_cgroup)
287 return;
288
289 spin_lock(&vmpr->sr_lock);
290 scanned = vmpr->scanned += scanned;
291 reclaimed = vmpr->reclaimed += reclaimed;
292 if (scanned < vmpressure_win) {
293 spin_unlock(&vmpr->sr_lock);
294 return;
295 }
296 vmpr->scanned = vmpr->reclaimed = 0;
297 spin_unlock(&vmpr->sr_lock);
298
299 level = vmpressure_calc_level(scanned, reclaimed);
300
301 if (level > VMPRESSURE_LOW) {
302 /*
303 * Let the socket buffer allocator know that
304 * we are having trouble reclaiming LRU pages.
305 *
306 * For hysteresis keep the pressure state
307 * asserted for a second in which subsequent
308 * pressure events can occur.
309 */
310 memcg->socket_pressure = jiffies + HZ;
311 }
312 }
313}
314
315/**
316 * vmpressure_prio() - Account memory pressure through reclaimer priority level
317 * @gfp: reclaimer's gfp mask
318 * @memcg: cgroup memory controller handle
319 * @prio: reclaimer's priority
320 *
321 * This function should be called from the reclaim path every time when
322 * the vmscan's reclaiming priority (scanning depth) changes.
323 *
324 * This function does not return any value.
325 */
326void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio)
327{
328 /*
329 * We only use prio for accounting critical level. For more info
330 * see comment for vmpressure_level_critical_prio variable above.
331 */
332 if (prio > vmpressure_level_critical_prio)
333 return;
334
335 /*
336 * OK, the prio is below the threshold, updating vmpressure
337 * information before shrinker dives into long shrinking of long
338 * range vmscan. Passing scanned = vmpressure_win, reclaimed = 0
339 * to the vmpressure() basically means that we signal 'critical'
340 * level.
341 */
342 vmpressure(gfp, memcg, true, vmpressure_win, 0);
343}
344
345static enum vmpressure_levels str_to_level(const char *arg)
346{
347 enum vmpressure_levels level;
348
349 for (level = 0; level < VMPRESSURE_NUM_LEVELS; level++)
350 if (!strcmp(vmpressure_str_levels[level], arg))
351 return level;
352 return -1;
353}
354
355static enum vmpressure_modes str_to_mode(const char *arg)
356{
357 enum vmpressure_modes mode;
358
359 for (mode = 0; mode < VMPRESSURE_NUM_MODES; mode++)
360 if (!strcmp(vmpressure_str_modes[mode], arg))
361 return mode;
362 return -1;
363}
364
365#define MAX_VMPRESSURE_ARGS_LEN (strlen("critical") + strlen("hierarchy") + 2)
366
367/**
368 * vmpressure_register_event() - Bind vmpressure notifications to an eventfd
369 * @memcg: memcg that is interested in vmpressure notifications
370 * @eventfd: eventfd context to link notifications with
371 * @args: event arguments (pressure level threshold, optional mode)
372 *
373 * This function associates eventfd context with the vmpressure
374 * infrastructure, so that the notifications will be delivered to the
375 * @eventfd. The @args parameter is a comma-delimited string that denotes a
376 * pressure level threshold (one of vmpressure_str_levels, i.e. "low", "medium",
377 * or "critical") and an optional mode (one of vmpressure_str_modes, i.e.
378 * "hierarchy" or "local").
379 *
380 * To be used as memcg event method.
381 */
382int vmpressure_register_event(struct mem_cgroup *memcg,
383 struct eventfd_ctx *eventfd, const char *args)
384{
385 struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
386 struct vmpressure_event *ev;
387 enum vmpressure_modes mode = VMPRESSURE_NO_PASSTHROUGH;
388 enum vmpressure_levels level = -1;
389 char *spec, *spec_orig;
390 char *token;
391 int ret = 0;
392
393 spec_orig = spec = kzalloc(MAX_VMPRESSURE_ARGS_LEN + 1, GFP_KERNEL);
394 if (!spec) {
395 ret = -ENOMEM;
396 goto out;
397 }
398 strncpy(spec, args, MAX_VMPRESSURE_ARGS_LEN);
399
400 /* Find required level */
401 token = strsep(&spec, ",");
402 level = str_to_level(token);
403 if (level == -1) {
404 ret = -EINVAL;
405 goto out;
406 }
407
408 /* Find optional mode */
409 token = strsep(&spec, ",");
410 if (token) {
411 mode = str_to_mode(token);
412 if (mode == -1) {
413 ret = -EINVAL;
414 goto out;
415 }
416 }
417
418 ev = kzalloc(sizeof(*ev), GFP_KERNEL);
419 if (!ev) {
420 ret = -ENOMEM;
421 goto out;
422 }
423
424 ev->efd = eventfd;
425 ev->level = level;
426 ev->mode = mode;
427
428 mutex_lock(&vmpr->events_lock);
429 list_add(&ev->node, &vmpr->events);
430 mutex_unlock(&vmpr->events_lock);
431out:
432 kfree(spec_orig);
433 return ret;
434}
435
436/**
437 * vmpressure_unregister_event() - Unbind eventfd from vmpressure
438 * @memcg: memcg handle
439 * @eventfd: eventfd context that was used to link vmpressure with the @cg
440 *
441 * This function does internal manipulations to detach the @eventfd from
442 * the vmpressure notifications, and then frees internal resources
443 * associated with the @eventfd (but the @eventfd itself is not freed).
444 *
445 * To be used as memcg event method.
446 */
447void vmpressure_unregister_event(struct mem_cgroup *memcg,
448 struct eventfd_ctx *eventfd)
449{
450 struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
451 struct vmpressure_event *ev;
452
453 mutex_lock(&vmpr->events_lock);
454 list_for_each_entry(ev, &vmpr->events, node) {
455 if (ev->efd != eventfd)
456 continue;
457 list_del(&ev->node);
458 kfree(ev);
459 break;
460 }
461 mutex_unlock(&vmpr->events_lock);
462}
463
464/**
465 * vmpressure_init() - Initialize vmpressure control structure
466 * @vmpr: Structure to be initialized
467 *
468 * This function should be called on every allocated vmpressure structure
469 * before any usage.
470 */
471void vmpressure_init(struct vmpressure *vmpr)
472{
473 spin_lock_init(&vmpr->sr_lock);
474 mutex_init(&vmpr->events_lock);
475 INIT_LIST_HEAD(&vmpr->events);
476 INIT_WORK(&vmpr->work, vmpressure_work_fn);
477}
478
479/**
480 * vmpressure_cleanup() - shuts down vmpressure control structure
481 * @vmpr: Structure to be cleaned up
482 *
483 * This function should be called before the structure in which it is
484 * embedded is cleaned up.
485 */
486void vmpressure_cleanup(struct vmpressure *vmpr)
487{
488 /*
489 * Make sure there is no pending work before eventfd infrastructure
490 * goes away.
491 */
492 flush_work(&vmpr->work);
493}
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Linux VM pressure
4 *
5 * Copyright 2012 Linaro Ltd.
6 * Anton Vorontsov <anton.vorontsov@linaro.org>
7 *
8 * Based on ideas from Andrew Morton, David Rientjes, KOSAKI Motohiro,
9 * Leonid Moiseichuk, Mel Gorman, Minchan Kim and Pekka Enberg.
10 */
11
12#include <linux/cgroup.h>
13#include <linux/fs.h>
14#include <linux/log2.h>
15#include <linux/sched.h>
16#include <linux/mm.h>
17#include <linux/vmstat.h>
18#include <linux/eventfd.h>
19#include <linux/slab.h>
20#include <linux/swap.h>
21#include <linux/printk.h>
22#include <linux/vmpressure.h>
23
24/*
25 * The window size (vmpressure_win) is the number of scanned pages before
26 * we try to analyze scanned/reclaimed ratio. So the window is used as a
27 * rate-limit tunable for the "low" level notification, and also for
28 * averaging the ratio for medium/critical levels. Using small window
29 * sizes can cause lot of false positives, but too big window size will
30 * delay the notifications.
31 *
32 * As the vmscan reclaimer logic works with chunks which are multiple of
33 * SWAP_CLUSTER_MAX, it makes sense to use it for the window size as well.
34 *
35 * TODO: Make the window size depend on machine size, as we do for vmstat
36 * thresholds. Currently we set it to 512 pages (2MB for 4KB pages).
37 */
38static const unsigned long vmpressure_win = SWAP_CLUSTER_MAX * 16;
39
40/*
41 * These thresholds are used when we account memory pressure through
42 * scanned/reclaimed ratio. The current values were chosen empirically. In
43 * essence, they are percents: the higher the value, the more number
44 * unsuccessful reclaims there were.
45 */
46static const unsigned int vmpressure_level_med = 60;
47static const unsigned int vmpressure_level_critical = 95;
48
49/*
50 * When there are too little pages left to scan, vmpressure() may miss the
51 * critical pressure as number of pages will be less than "window size".
52 * However, in that case the vmscan priority will raise fast as the
53 * reclaimer will try to scan LRUs more deeply.
54 *
55 * The vmscan logic considers these special priorities:
56 *
57 * prio == DEF_PRIORITY (12): reclaimer starts with that value
58 * prio <= DEF_PRIORITY - 2 : kswapd becomes somewhat overwhelmed
59 * prio == 0 : close to OOM, kernel scans every page in an lru
60 *
61 * Any value in this range is acceptable for this tunable (i.e. from 12 to
62 * 0). Current value for the vmpressure_level_critical_prio is chosen
63 * empirically, but the number, in essence, means that we consider
64 * critical level when scanning depth is ~10% of the lru size (vmscan
65 * scans 'lru_size >> prio' pages, so it is actually 12.5%, or one
66 * eights).
67 */
68static const unsigned int vmpressure_level_critical_prio = ilog2(100 / 10);
69
70static struct vmpressure *work_to_vmpressure(struct work_struct *work)
71{
72 return container_of(work, struct vmpressure, work);
73}
74
75static struct vmpressure *vmpressure_parent(struct vmpressure *vmpr)
76{
77 struct mem_cgroup *memcg = vmpressure_to_memcg(vmpr);
78
79 memcg = parent_mem_cgroup(memcg);
80 if (!memcg)
81 return NULL;
82 return memcg_to_vmpressure(memcg);
83}
84
85enum vmpressure_levels {
86 VMPRESSURE_LOW = 0,
87 VMPRESSURE_MEDIUM,
88 VMPRESSURE_CRITICAL,
89 VMPRESSURE_NUM_LEVELS,
90};
91
92enum vmpressure_modes {
93 VMPRESSURE_NO_PASSTHROUGH = 0,
94 VMPRESSURE_HIERARCHY,
95 VMPRESSURE_LOCAL,
96 VMPRESSURE_NUM_MODES,
97};
98
99static const char * const vmpressure_str_levels[] = {
100 [VMPRESSURE_LOW] = "low",
101 [VMPRESSURE_MEDIUM] = "medium",
102 [VMPRESSURE_CRITICAL] = "critical",
103};
104
105static const char * const vmpressure_str_modes[] = {
106 [VMPRESSURE_NO_PASSTHROUGH] = "default",
107 [VMPRESSURE_HIERARCHY] = "hierarchy",
108 [VMPRESSURE_LOCAL] = "local",
109};
110
111static enum vmpressure_levels vmpressure_level(unsigned long pressure)
112{
113 if (pressure >= vmpressure_level_critical)
114 return VMPRESSURE_CRITICAL;
115 else if (pressure >= vmpressure_level_med)
116 return VMPRESSURE_MEDIUM;
117 return VMPRESSURE_LOW;
118}
119
120static enum vmpressure_levels vmpressure_calc_level(unsigned long scanned,
121 unsigned long reclaimed)
122{
123 unsigned long scale = scanned + reclaimed;
124 unsigned long pressure = 0;
125
126 /*
127 * reclaimed can be greater than scanned for things such as reclaimed
128 * slab pages. shrink_node() just adds reclaimed pages without a
129 * related increment to scanned pages.
130 */
131 if (reclaimed >= scanned)
132 goto out;
133 /*
134 * We calculate the ratio (in percents) of how many pages were
135 * scanned vs. reclaimed in a given time frame (window). Note that
136 * time is in VM reclaimer's "ticks", i.e. number of pages
137 * scanned. This makes it possible to set desired reaction time
138 * and serves as a ratelimit.
139 */
140 pressure = scale - (reclaimed * scale / scanned);
141 pressure = pressure * 100 / scale;
142
143out:
144 pr_debug("%s: %3lu (s: %lu r: %lu)\n", __func__, pressure,
145 scanned, reclaimed);
146
147 return vmpressure_level(pressure);
148}
149
150struct vmpressure_event {
151 struct eventfd_ctx *efd;
152 enum vmpressure_levels level;
153 enum vmpressure_modes mode;
154 struct list_head node;
155};
156
157static bool vmpressure_event(struct vmpressure *vmpr,
158 const enum vmpressure_levels level,
159 bool ancestor, bool signalled)
160{
161 struct vmpressure_event *ev;
162 bool ret = false;
163
164 mutex_lock(&vmpr->events_lock);
165 list_for_each_entry(ev, &vmpr->events, node) {
166 if (ancestor && ev->mode == VMPRESSURE_LOCAL)
167 continue;
168 if (signalled && ev->mode == VMPRESSURE_NO_PASSTHROUGH)
169 continue;
170 if (level < ev->level)
171 continue;
172 eventfd_signal(ev->efd);
173 ret = true;
174 }
175 mutex_unlock(&vmpr->events_lock);
176
177 return ret;
178}
179
180static void vmpressure_work_fn(struct work_struct *work)
181{
182 struct vmpressure *vmpr = work_to_vmpressure(work);
183 unsigned long scanned;
184 unsigned long reclaimed;
185 enum vmpressure_levels level;
186 bool ancestor = false;
187 bool signalled = false;
188
189 spin_lock(&vmpr->sr_lock);
190 /*
191 * Several contexts might be calling vmpressure(), so it is
192 * possible that the work was rescheduled again before the old
193 * work context cleared the counters. In that case we will run
194 * just after the old work returns, but then scanned might be zero
195 * here. No need for any locks here since we don't care if
196 * vmpr->reclaimed is in sync.
197 */
198 scanned = vmpr->tree_scanned;
199 if (!scanned) {
200 spin_unlock(&vmpr->sr_lock);
201 return;
202 }
203
204 reclaimed = vmpr->tree_reclaimed;
205 vmpr->tree_scanned = 0;
206 vmpr->tree_reclaimed = 0;
207 spin_unlock(&vmpr->sr_lock);
208
209 level = vmpressure_calc_level(scanned, reclaimed);
210
211 do {
212 if (vmpressure_event(vmpr, level, ancestor, signalled))
213 signalled = true;
214 ancestor = true;
215 } while ((vmpr = vmpressure_parent(vmpr)));
216}
217
218/**
219 * vmpressure() - Account memory pressure through scanned/reclaimed ratio
220 * @gfp: reclaimer's gfp mask
221 * @memcg: cgroup memory controller handle
222 * @tree: legacy subtree mode
223 * @scanned: number of pages scanned
224 * @reclaimed: number of pages reclaimed
225 *
226 * This function should be called from the vmscan reclaim path to account
227 * "instantaneous" memory pressure (scanned/reclaimed ratio). The raw
228 * pressure index is then further refined and averaged over time.
229 *
230 * If @tree is set, vmpressure is in traditional userspace reporting
231 * mode: @memcg is considered the pressure root and userspace is
232 * notified of the entire subtree's reclaim efficiency.
233 *
234 * If @tree is not set, reclaim efficiency is recorded for @memcg, and
235 * only in-kernel users are notified.
236 *
237 * This function does not return any value.
238 */
239void vmpressure(gfp_t gfp, struct mem_cgroup *memcg, bool tree,
240 unsigned long scanned, unsigned long reclaimed)
241{
242 struct vmpressure *vmpr;
243
244 if (mem_cgroup_disabled())
245 return;
246
247 /*
248 * The in-kernel users only care about the reclaim efficiency
249 * for this @memcg rather than the whole subtree, and there
250 * isn't and won't be any in-kernel user in a legacy cgroup.
251 */
252 if (!cgroup_subsys_on_dfl(memory_cgrp_subsys) && !tree)
253 return;
254
255 vmpr = memcg_to_vmpressure(memcg);
256
257 /*
258 * Here we only want to account pressure that userland is able to
259 * help us with. For example, suppose that DMA zone is under
260 * pressure; if we notify userland about that kind of pressure,
261 * then it will be mostly a waste as it will trigger unnecessary
262 * freeing of memory by userland (since userland is more likely to
263 * have HIGHMEM/MOVABLE pages instead of the DMA fallback). That
264 * is why we include only movable, highmem and FS/IO pages.
265 * Indirect reclaim (kswapd) sets sc->gfp_mask to GFP_KERNEL, so
266 * we account it too.
267 */
268 if (!(gfp & (__GFP_HIGHMEM | __GFP_MOVABLE | __GFP_IO | __GFP_FS)))
269 return;
270
271 /*
272 * If we got here with no pages scanned, then that is an indicator
273 * that reclaimer was unable to find any shrinkable LRUs at the
274 * current scanning depth. But it does not mean that we should
275 * report the critical pressure, yet. If the scanning priority
276 * (scanning depth) goes too high (deep), we will be notified
277 * through vmpressure_prio(). But so far, keep calm.
278 */
279 if (!scanned)
280 return;
281
282 if (tree) {
283 spin_lock(&vmpr->sr_lock);
284 scanned = vmpr->tree_scanned += scanned;
285 vmpr->tree_reclaimed += reclaimed;
286 spin_unlock(&vmpr->sr_lock);
287
288 if (scanned < vmpressure_win)
289 return;
290 schedule_work(&vmpr->work);
291 } else {
292 enum vmpressure_levels level;
293
294 /* For now, no users for root-level efficiency */
295 if (!memcg || mem_cgroup_is_root(memcg))
296 return;
297
298 spin_lock(&vmpr->sr_lock);
299 scanned = vmpr->scanned += scanned;
300 reclaimed = vmpr->reclaimed += reclaimed;
301 if (scanned < vmpressure_win) {
302 spin_unlock(&vmpr->sr_lock);
303 return;
304 }
305 vmpr->scanned = vmpr->reclaimed = 0;
306 spin_unlock(&vmpr->sr_lock);
307
308 level = vmpressure_calc_level(scanned, reclaimed);
309
310 if (level > VMPRESSURE_LOW) {
311 /*
312 * Let the socket buffer allocator know that
313 * we are having trouble reclaiming LRU pages.
314 *
315 * For hysteresis keep the pressure state
316 * asserted for a second in which subsequent
317 * pressure events can occur.
318 */
319 WRITE_ONCE(memcg->socket_pressure, jiffies + HZ);
320 }
321 }
322}
323
324/**
325 * vmpressure_prio() - Account memory pressure through reclaimer priority level
326 * @gfp: reclaimer's gfp mask
327 * @memcg: cgroup memory controller handle
328 * @prio: reclaimer's priority
329 *
330 * This function should be called from the reclaim path every time when
331 * the vmscan's reclaiming priority (scanning depth) changes.
332 *
333 * This function does not return any value.
334 */
335void vmpressure_prio(gfp_t gfp, struct mem_cgroup *memcg, int prio)
336{
337 /*
338 * We only use prio for accounting critical level. For more info
339 * see comment for vmpressure_level_critical_prio variable above.
340 */
341 if (prio > vmpressure_level_critical_prio)
342 return;
343
344 /*
345 * OK, the prio is below the threshold, updating vmpressure
346 * information before shrinker dives into long shrinking of long
347 * range vmscan. Passing scanned = vmpressure_win, reclaimed = 0
348 * to the vmpressure() basically means that we signal 'critical'
349 * level.
350 */
351 vmpressure(gfp, memcg, true, vmpressure_win, 0);
352}
353
354#define MAX_VMPRESSURE_ARGS_LEN (strlen("critical") + strlen("hierarchy") + 2)
355
356/**
357 * vmpressure_register_event() - Bind vmpressure notifications to an eventfd
358 * @memcg: memcg that is interested in vmpressure notifications
359 * @eventfd: eventfd context to link notifications with
360 * @args: event arguments (pressure level threshold, optional mode)
361 *
362 * This function associates eventfd context with the vmpressure
363 * infrastructure, so that the notifications will be delivered to the
364 * @eventfd. The @args parameter is a comma-delimited string that denotes a
365 * pressure level threshold (one of vmpressure_str_levels, i.e. "low", "medium",
366 * or "critical") and an optional mode (one of vmpressure_str_modes, i.e.
367 * "hierarchy" or "local").
368 *
369 * To be used as memcg event method.
370 *
371 * Return: 0 on success, -ENOMEM on memory failure or -EINVAL if @args could
372 * not be parsed.
373 */
374int vmpressure_register_event(struct mem_cgroup *memcg,
375 struct eventfd_ctx *eventfd, const char *args)
376{
377 struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
378 struct vmpressure_event *ev;
379 enum vmpressure_modes mode = VMPRESSURE_NO_PASSTHROUGH;
380 enum vmpressure_levels level;
381 char *spec, *spec_orig;
382 char *token;
383 int ret = 0;
384
385 spec_orig = spec = kstrndup(args, MAX_VMPRESSURE_ARGS_LEN, GFP_KERNEL);
386 if (!spec)
387 return -ENOMEM;
388
389 /* Find required level */
390 token = strsep(&spec, ",");
391 ret = match_string(vmpressure_str_levels, VMPRESSURE_NUM_LEVELS, token);
392 if (ret < 0)
393 goto out;
394 level = ret;
395
396 /* Find optional mode */
397 token = strsep(&spec, ",");
398 if (token) {
399 ret = match_string(vmpressure_str_modes, VMPRESSURE_NUM_MODES, token);
400 if (ret < 0)
401 goto out;
402 mode = ret;
403 }
404
405 ev = kzalloc(sizeof(*ev), GFP_KERNEL);
406 if (!ev) {
407 ret = -ENOMEM;
408 goto out;
409 }
410
411 ev->efd = eventfd;
412 ev->level = level;
413 ev->mode = mode;
414
415 mutex_lock(&vmpr->events_lock);
416 list_add(&ev->node, &vmpr->events);
417 mutex_unlock(&vmpr->events_lock);
418 ret = 0;
419out:
420 kfree(spec_orig);
421 return ret;
422}
423
424/**
425 * vmpressure_unregister_event() - Unbind eventfd from vmpressure
426 * @memcg: memcg handle
427 * @eventfd: eventfd context that was used to link vmpressure with the @cg
428 *
429 * This function does internal manipulations to detach the @eventfd from
430 * the vmpressure notifications, and then frees internal resources
431 * associated with the @eventfd (but the @eventfd itself is not freed).
432 *
433 * To be used as memcg event method.
434 */
435void vmpressure_unregister_event(struct mem_cgroup *memcg,
436 struct eventfd_ctx *eventfd)
437{
438 struct vmpressure *vmpr = memcg_to_vmpressure(memcg);
439 struct vmpressure_event *ev;
440
441 mutex_lock(&vmpr->events_lock);
442 list_for_each_entry(ev, &vmpr->events, node) {
443 if (ev->efd != eventfd)
444 continue;
445 list_del(&ev->node);
446 kfree(ev);
447 break;
448 }
449 mutex_unlock(&vmpr->events_lock);
450}
451
452/**
453 * vmpressure_init() - Initialize vmpressure control structure
454 * @vmpr: Structure to be initialized
455 *
456 * This function should be called on every allocated vmpressure structure
457 * before any usage.
458 */
459void vmpressure_init(struct vmpressure *vmpr)
460{
461 spin_lock_init(&vmpr->sr_lock);
462 mutex_init(&vmpr->events_lock);
463 INIT_LIST_HEAD(&vmpr->events);
464 INIT_WORK(&vmpr->work, vmpressure_work_fn);
465}
466
467/**
468 * vmpressure_cleanup() - shuts down vmpressure control structure
469 * @vmpr: Structure to be cleaned up
470 *
471 * This function should be called before the structure in which it is
472 * embedded is cleaned up.
473 */
474void vmpressure_cleanup(struct vmpressure *vmpr)
475{
476 /*
477 * Make sure there is no pending work before eventfd infrastructure
478 * goes away.
479 */
480 flush_work(&vmpr->work);
481}