Loading...
1#
2# Broadcom device configuration
3#
4
5config NET_VENDOR_BROADCOM
6 bool "Broadcom devices"
7 default y
8 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
9 SIBYTE_SB1xxx_SOC
10 ---help---
11 If you have a network (Ethernet) chipset belonging to this class,
12 say Y.
13
14 Note that the answer to this question does not directly affect
15 the kernel: saying N will just case the configurator to skip all
16 the questions regarding AMD chipsets. If you say Y, you will be asked
17 for your specific chipset/driver in the following questions.
18
19if NET_VENDOR_BROADCOM
20
21config B44
22 tristate "Broadcom 440x/47xx ethernet support"
23 depends on SSB_POSSIBLE && HAS_DMA
24 select SSB
25 select MII
26 select PHYLIB
27 ---help---
28 If you have a network (Ethernet) controller of this type, say Y
29 or M here.
30
31 To compile this driver as a module, choose M here. The module
32 will be called b44.
33
34# Auto-select SSB PCI-HOST support, if possible
35config B44_PCI_AUTOSELECT
36 bool
37 depends on B44 && SSB_PCIHOST_POSSIBLE
38 select SSB_PCIHOST
39 default y
40
41# Auto-select SSB PCICORE driver, if possible
42config B44_PCICORE_AUTOSELECT
43 bool
44 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
45 select SSB_DRIVER_PCICORE
46 default y
47
48config B44_PCI
49 bool
50 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
51 default y
52
53config BCM63XX_ENET
54 tristate "Broadcom 63xx internal mac support"
55 depends on BCM63XX
56 select MII
57 select PHYLIB
58 help
59 This driver supports the ethernet MACs in the Broadcom 63xx
60 MIPS chipset family (BCM63XX).
61
62config BCMGENET
63 tristate "Broadcom GENET internal MAC support"
64 depends on OF && HAS_IOMEM
65 select MII
66 select PHYLIB
67 select FIXED_PHY
68 select BCM7XXX_PHY
69 select MDIO_BCM_UNIMAC
70 help
71 This driver supports the built-in Ethernet MACs found in the
72 Broadcom BCM7xxx Set Top Box family chipset.
73
74config BNX2
75 tristate "QLogic bnx2 support"
76 depends on PCI
77 select CRC32
78 select FW_LOADER
79 ---help---
80 This driver supports QLogic bnx2 gigabit Ethernet cards.
81
82 To compile this driver as a module, choose M here: the module
83 will be called bnx2. This is recommended.
84
85config CNIC
86 tristate "QLogic CNIC support"
87 depends on PCI && (IPV6 || IPV6=n)
88 select BNX2
89 select UIO
90 ---help---
91 This driver supports offload features of QLogic bnx2 gigabit
92 Ethernet cards.
93
94 To compile this driver as a module, choose M here: the module
95 will be called cnic. This is recommended.
96
97config SB1250_MAC
98 tristate "SB1250 Gigabit Ethernet support"
99 depends on SIBYTE_SB1xxx_SOC
100 select PHYLIB
101 ---help---
102 This driver supports Gigabit Ethernet interfaces based on the
103 Broadcom SiByte family of System-On-a-Chip parts. They include
104 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
105 and BCM1480 chips.
106
107 To compile this driver as a module, choose M here: the module
108 will be called sb1250-mac.
109
110config TIGON3
111 tristate "Broadcom Tigon3 support"
112 depends on PCI
113 select PHYLIB
114 imply PTP_1588_CLOCK
115 ---help---
116 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
117
118 To compile this driver as a module, choose M here: the module
119 will be called tg3. This is recommended.
120
121config TIGON3_HWMON
122 bool "Broadcom Tigon3 HWMON support"
123 default y
124 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
125 ---help---
126 Say Y if you want to expose the thermal sensor on Tigon3 devices.
127
128config BNX2X
129 tristate "Broadcom NetXtremeII 10Gb support"
130 depends on PCI
131 imply PTP_1588_CLOCK
132 select FW_LOADER
133 select ZLIB_INFLATE
134 select LIBCRC32C
135 select MDIO
136 ---help---
137 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
138 To compile this driver as a module, choose M here: the module
139 will be called bnx2x. This is recommended.
140
141config BNX2X_SRIOV
142 bool "Broadcom 578xx and 57712 SR-IOV support"
143 depends on BNX2X && PCI_IOV
144 default y
145 ---help---
146 This configuration parameter enables Single Root Input Output
147 Virtualization support in the 578xx and 57712 products. This
148 allows for virtual function acceleration in virtual environments.
149
150config BGMAC
151 tristate
152 help
153 This enables the integrated ethernet controller support for many
154 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
155 needs to be enabled to select this.
156
157config BGMAC_BCMA
158 tristate "Broadcom iProc GBit BCMA support"
159 depends on BCMA && BCMA_HOST_SOC
160 depends on HAS_DMA
161 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
162 select BGMAC
163 select PHYLIB
164 select FIXED_PHY
165 ---help---
166 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
167 They can be found on BCM47xx SoCs and provide gigabit ethernet.
168 In case of using this driver on BCM4706 it's also requires to enable
169 BCMA_DRIVER_GMAC_CMN to make it work.
170
171config BGMAC_PLATFORM
172 tristate "Broadcom iProc GBit platform support"
173 depends on HAS_DMA
174 depends on ARCH_BCM_IPROC || COMPILE_TEST
175 depends on OF
176 select BGMAC
177 select PHYLIB
178 select FIXED_PHY
179 default ARCH_BCM_IPROC
180 ---help---
181 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
182 controller through the generic platform interface
183
184config SYSTEMPORT
185 tristate "Broadcom SYSTEMPORT internal MAC support"
186 depends on OF
187 depends on NET_DSA || !NET_DSA
188 select MII
189 select PHYLIB
190 select FIXED_PHY
191 help
192 This driver supports the built-in Ethernet MACs found in the
193 Broadcom BCM7xxx Set Top Box family chipset using an internal
194 Ethernet switch.
195
196config BNXT
197 tristate "Broadcom NetXtreme-C/E support"
198 depends on PCI
199 depends on MAY_USE_DEVLINK
200 select FW_LOADER
201 select LIBCRC32C
202 ---help---
203 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
204 Ethernet cards. To compile this driver as a module, choose M here:
205 the module will be called bnxt_en. This is recommended.
206
207config BNXT_SRIOV
208 bool "Broadcom NetXtreme-C/E SR-IOV support"
209 depends on BNXT && PCI_IOV
210 default y
211 ---help---
212 This configuration parameter enables Single Root Input Output
213 Virtualization support in the NetXtreme-C/E products. This
214 allows for virtual function acceleration in virtual environments.
215
216config BNXT_FLOWER_OFFLOAD
217 bool "TC Flower offload support for NetXtreme-C/E"
218 depends on BNXT
219 default y
220 ---help---
221 This configuration parameter enables TC Flower packet classifier
222 offload for eswitch. This option enables SR-IOV switchdev eswitch
223 offload.
224
225config BNXT_DCB
226 bool "Data Center Bridging (DCB) Support"
227 default n
228 depends on BNXT && DCB
229 ---help---
230 Say Y here if you want to use Data Center Bridging (DCB) in the
231 driver.
232
233 If unsure, say N.
234
235endif # NET_VENDOR_BROADCOM
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Broadcom device configuration
4#
5
6config NET_VENDOR_BROADCOM
7 bool "Broadcom devices"
8 default y
9 depends on (SSB_POSSIBLE && HAS_DMA) || PCI || BCM63XX || \
10 SIBYTE_SB1xxx_SOC
11 help
12 If you have a network (Ethernet) chipset belonging to this class,
13 say Y.
14
15 Note that the answer to this question does not directly affect
16 the kernel: saying N will just cause the configurator to skip all
17 the questions regarding Broadcom chipsets. If you say Y, you will
18 be asked for your specific chipset/driver in the following questions.
19
20if NET_VENDOR_BROADCOM
21
22config B44
23 tristate "Broadcom 440x/47xx ethernet support"
24 depends on SSB_POSSIBLE && HAS_DMA
25 select SSB
26 select MII
27 select PHYLIB
28 help
29 If you have a network (Ethernet) controller of this type, say Y
30 or M here.
31
32 To compile this driver as a module, choose M here. The module
33 will be called b44.
34
35# Auto-select SSB PCI-HOST support, if possible
36config B44_PCI_AUTOSELECT
37 bool
38 depends on B44 && SSB_PCIHOST_POSSIBLE
39 select SSB_PCIHOST
40 default y
41
42# Auto-select SSB PCICORE driver, if possible
43config B44_PCICORE_AUTOSELECT
44 bool
45 depends on B44 && SSB_DRIVER_PCICORE_POSSIBLE
46 select SSB_DRIVER_PCICORE
47 default y
48
49config B44_PCI
50 bool
51 depends on B44_PCI_AUTOSELECT && B44_PCICORE_AUTOSELECT
52 default y
53
54config BCM4908_ENET
55 tristate "Broadcom BCM4908 internal mac support"
56 depends on ARCH_BCMBCA || COMPILE_TEST
57 default y if ARCH_BCMBCA
58 help
59 This driver supports Ethernet controller integrated into Broadcom
60 BCM4908 family SoCs.
61
62config BCM63XX_ENET
63 tristate "Broadcom 63xx internal mac support"
64 depends on BCM63XX
65 select MII
66 select PHYLIB
67 help
68 This driver supports the ethernet MACs in the Broadcom 63xx
69 MIPS chipset family (BCM63XX).
70
71config BCMGENET
72 tristate "Broadcom GENET internal MAC support"
73 depends on HAS_IOMEM
74 depends on PTP_1588_CLOCK_OPTIONAL || !ARCH_BCM2835
75 select PHYLIB
76 select FIXED_PHY
77 select BCM7XXX_PHY
78 select MDIO_BCM_UNIMAC
79 select DIMLIB
80 select BROADCOM_PHY if ARCH_BCM2835
81 help
82 This driver supports the built-in Ethernet MACs found in the
83 Broadcom BCM7xxx Set Top Box family chipset.
84
85config BNX2
86 tristate "QLogic bnx2 support"
87 depends on PCI
88 select CRC32
89 select FW_LOADER
90 help
91 This driver supports QLogic bnx2 gigabit Ethernet cards.
92
93 To compile this driver as a module, choose M here: the module
94 will be called bnx2. This is recommended.
95
96config CNIC
97 tristate "QLogic CNIC support"
98 depends on PCI && (IPV6 || IPV6=n)
99 depends on MMU
100 select BNX2
101 select UIO
102 help
103 This driver supports offload features of QLogic bnx2 gigabit
104 Ethernet cards.
105
106 To compile this driver as a module, choose M here: the module
107 will be called cnic. This is recommended.
108
109config SB1250_MAC
110 tristate "SB1250 Gigabit Ethernet support"
111 depends on SIBYTE_SB1xxx_SOC
112 select PHYLIB
113 help
114 This driver supports Gigabit Ethernet interfaces based on the
115 Broadcom SiByte family of System-On-a-Chip parts. They include
116 the BCM1120, BCM1125, BCM1125H, BCM1250, BCM1255, BCM1280, BCM1455
117 and BCM1480 chips.
118
119 To compile this driver as a module, choose M here: the module
120 will be called sb1250-mac.
121
122config TIGON3
123 tristate "Broadcom Tigon3 support"
124 depends on PCI
125 depends on PTP_1588_CLOCK_OPTIONAL
126 select PHYLIB
127 help
128 This driver supports Broadcom Tigon3 based gigabit Ethernet cards.
129
130 To compile this driver as a module, choose M here: the module
131 will be called tg3. This is recommended.
132
133config TIGON3_HWMON
134 bool "Broadcom Tigon3 HWMON support"
135 default y
136 depends on TIGON3 && HWMON && !(TIGON3=y && HWMON=m)
137 help
138 Say Y if you want to expose the thermal sensor on Tigon3 devices.
139
140config BNX2X
141 tristate "Broadcom NetXtremeII 10Gb support"
142 depends on PCI
143 depends on PTP_1588_CLOCK_OPTIONAL
144 select FW_LOADER
145 select ZLIB_INFLATE
146 select LIBCRC32C
147 select MDIO
148 help
149 This driver supports Broadcom NetXtremeII 10 gigabit Ethernet cards.
150 To compile this driver as a module, choose M here: the module
151 will be called bnx2x. This is recommended.
152
153config BNX2X_SRIOV
154 bool "Broadcom 578xx and 57712 SR-IOV support"
155 depends on BNX2X && PCI_IOV
156 default y
157 help
158 This configuration parameter enables Single Root Input Output
159 Virtualization support in the 578xx and 57712 products. This
160 allows for virtual function acceleration in virtual environments.
161
162config BGMAC
163 tristate
164 help
165 This enables the integrated ethernet controller support for many
166 Broadcom (mostly iProc) SoCs. An appropriate bus interface driver
167 needs to be enabled to select this.
168
169config BGMAC_BCMA
170 tristate "Broadcom iProc GBit BCMA support"
171 depends on BCMA && BCMA_HOST_SOC
172 depends on BCM47XX || ARCH_BCM_5301X || COMPILE_TEST
173 select BGMAC
174 select PHYLIB
175 select FIXED_PHY
176 help
177 This driver supports GBit MAC and BCM4706 GBit MAC cores on BCMA bus.
178 They can be found on BCM47xx SoCs and provide gigabit ethernet.
179 In case of using this driver on BCM4706 it's also requires to enable
180 BCMA_DRIVER_GMAC_CMN to make it work.
181
182config BGMAC_PLATFORM
183 tristate "Broadcom iProc GBit platform support"
184 depends on ARCH_BCM_IPROC || COMPILE_TEST
185 select BGMAC
186 select PHYLIB
187 select FIXED_PHY
188 default ARCH_BCM_IPROC
189 help
190 Say Y here if you want to use the Broadcom iProc Gigabit Ethernet
191 controller through the generic platform interface
192
193config SYSTEMPORT
194 tristate "Broadcom SYSTEMPORT internal MAC support"
195 depends on HAS_IOMEM
196 depends on NET_DSA || !NET_DSA
197 select PHYLIB
198 select FIXED_PHY
199 select DIMLIB
200 help
201 This driver supports the built-in Ethernet MACs found in the
202 Broadcom BCM7xxx Set Top Box family chipset using an internal
203 Ethernet switch.
204
205config BNXT
206 tristate "Broadcom NetXtreme-C/E support"
207 depends on PCI
208 depends on PTP_1588_CLOCK_OPTIONAL
209 select FW_LOADER
210 select LIBCRC32C
211 select NET_DEVLINK
212 select PAGE_POOL
213 select DIMLIB
214 select AUXILIARY_BUS
215 help
216 This driver supports Broadcom NetXtreme-C/E 10/25/40/50 gigabit
217 Ethernet cards. To compile this driver as a module, choose M here:
218 the module will be called bnxt_en. This is recommended.
219
220config BNXT_SRIOV
221 bool "Broadcom NetXtreme-C/E SR-IOV support"
222 depends on BNXT && PCI_IOV
223 default y
224 help
225 This configuration parameter enables Single Root Input Output
226 Virtualization support in the NetXtreme-C/E products. This
227 allows for virtual function acceleration in virtual environments.
228
229config BNXT_FLOWER_OFFLOAD
230 bool "TC Flower offload support for NetXtreme-C/E"
231 depends on BNXT
232 default y
233 help
234 This configuration parameter enables TC Flower packet classifier
235 offload for eswitch. This option enables SR-IOV switchdev eswitch
236 offload.
237
238config BNXT_DCB
239 bool "Data Center Bridging (DCB) Support"
240 default n
241 depends on BNXT && DCB
242 help
243 Say Y here if you want to use Data Center Bridging (DCB) in the
244 driver.
245
246 If unsure, say N.
247
248config BNXT_HWMON
249 bool "Broadcom NetXtreme-C/E HWMON support"
250 default y
251 depends on BNXT && HWMON && !(BNXT=y && HWMON=m)
252 help
253 Say Y if you want to expose the thermal sensor data on NetXtreme-C/E
254 devices, via the hwmon sysfs interface.
255
256config BCMASP
257 tristate "Broadcom ASP 2.0 Ethernet support"
258 depends on ARCH_BRCMSTB || COMPILE_TEST
259 default ARCH_BRCMSTB
260 depends on OF
261 select PHYLIB
262 select MDIO_BCM_UNIMAC
263 help
264 This configuration enables the Broadcom ASP 2.0 Ethernet controller
265 driver which is present in Broadcom STB SoCs such as 72165.
266
267endif # NET_VENDOR_BROADCOM