Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Jailhouse paravirt_ops implementation
4 *
5 * Copyright (c) Siemens AG, 2015-2017
6 *
7 * Authors:
8 * Jan Kiszka <jan.kiszka@siemens.com>
9 */
10
11#include <linux/acpi_pmtmr.h>
12#include <linux/kernel.h>
13#include <linux/reboot.h>
14#include <asm/apic.h>
15#include <asm/cpu.h>
16#include <asm/hypervisor.h>
17#include <asm/i8259.h>
18#include <asm/irqdomain.h>
19#include <asm/pci_x86.h>
20#include <asm/reboot.h>
21#include <asm/setup.h>
22
23static __initdata struct jailhouse_setup_data setup_data;
24static unsigned int precalibrated_tsc_khz;
25
26static uint32_t jailhouse_cpuid_base(void)
27{
28 if (boot_cpu_data.cpuid_level < 0 ||
29 !boot_cpu_has(X86_FEATURE_HYPERVISOR))
30 return 0;
31
32 return hypervisor_cpuid_base("Jailhouse\0\0\0", 0);
33}
34
35static uint32_t __init jailhouse_detect(void)
36{
37 return jailhouse_cpuid_base();
38}
39
40static void jailhouse_get_wallclock(struct timespec *now)
41{
42 memset(now, 0, sizeof(*now));
43}
44
45static void __init jailhouse_timer_init(void)
46{
47 lapic_timer_frequency = setup_data.apic_khz * (1000 / HZ);
48}
49
50static unsigned long jailhouse_get_tsc(void)
51{
52 return precalibrated_tsc_khz;
53}
54
55static void __init jailhouse_x2apic_init(void)
56{
57#ifdef CONFIG_X86_X2APIC
58 if (!x2apic_enabled())
59 return;
60 /*
61 * We do not have access to IR inside Jailhouse non-root cells. So
62 * we have to run in physical mode.
63 */
64 x2apic_phys = 1;
65 /*
66 * This will trigger the switch to apic_x2apic_phys. Empty OEM IDs
67 * ensure that only this APIC driver picks up the call.
68 */
69 default_acpi_madt_oem_check("", "");
70#endif
71}
72
73static void __init jailhouse_get_smp_config(unsigned int early)
74{
75 struct ioapic_domain_cfg ioapic_cfg = {
76 .type = IOAPIC_DOMAIN_STRICT,
77 .ops = &mp_ioapic_irqdomain_ops,
78 };
79 struct mpc_intsrc mp_irq = {
80 .type = MP_INTSRC,
81 .irqtype = mp_INT,
82 .irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE,
83 };
84 unsigned int cpu;
85
86 jailhouse_x2apic_init();
87
88 register_lapic_address(0xfee00000);
89
90 for (cpu = 0; cpu < setup_data.num_cpus; cpu++) {
91 generic_processor_info(setup_data.cpu_ids[cpu],
92 boot_cpu_apic_version);
93 }
94
95 smp_found_config = 1;
96
97 if (setup_data.standard_ioapic) {
98 mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg);
99
100 /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
101 mp_irq.srcbusirq = mp_irq.dstirq = 3;
102 mp_save_irq(&mp_irq);
103
104 mp_irq.srcbusirq = mp_irq.dstirq = 4;
105 mp_save_irq(&mp_irq);
106 }
107}
108
109static void jailhouse_no_restart(void)
110{
111 pr_notice("Jailhouse: Restart not supported, halting\n");
112 machine_halt();
113}
114
115static int __init jailhouse_pci_arch_init(void)
116{
117 pci_direct_init(1);
118
119 /*
120 * There are no bridges on the virtual PCI root bus under Jailhouse,
121 * thus no other way to discover all devices than a full scan.
122 * Respect any overrides via the command line, though.
123 */
124 if (pcibios_last_bus < 0)
125 pcibios_last_bus = 0xff;
126
127#ifdef CONFIG_PCI_MMCONFIG
128 if (setup_data.pci_mmconfig_base) {
129 pci_mmconfig_add(0, 0, pcibios_last_bus,
130 setup_data.pci_mmconfig_base);
131 pci_mmcfg_arch_init();
132 }
133#endif
134
135 return 0;
136}
137
138static void __init jailhouse_init_platform(void)
139{
140 u64 pa_data = boot_params.hdr.setup_data;
141 struct setup_data header;
142 void *mapping;
143
144 x86_init.irqs.pre_vector_init = x86_init_noop;
145 x86_init.timers.timer_init = jailhouse_timer_init;
146 x86_init.mpparse.get_smp_config = jailhouse_get_smp_config;
147 x86_init.pci.arch_init = jailhouse_pci_arch_init;
148
149 x86_platform.calibrate_cpu = jailhouse_get_tsc;
150 x86_platform.calibrate_tsc = jailhouse_get_tsc;
151 x86_platform.get_wallclock = jailhouse_get_wallclock;
152 x86_platform.legacy.rtc = 0;
153 x86_platform.legacy.warm_reset = 0;
154 x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT;
155
156 legacy_pic = &null_legacy_pic;
157
158 machine_ops.emergency_restart = jailhouse_no_restart;
159
160 while (pa_data) {
161 mapping = early_memremap(pa_data, sizeof(header));
162 memcpy(&header, mapping, sizeof(header));
163 early_memunmap(mapping, sizeof(header));
164
165 if (header.type == SETUP_JAILHOUSE &&
166 header.len >= sizeof(setup_data)) {
167 pa_data += offsetof(struct setup_data, data);
168
169 mapping = early_memremap(pa_data, sizeof(setup_data));
170 memcpy(&setup_data, mapping, sizeof(setup_data));
171 early_memunmap(mapping, sizeof(setup_data));
172
173 break;
174 }
175
176 pa_data = header.next;
177 }
178
179 if (!pa_data)
180 panic("Jailhouse: No valid setup data found");
181
182 if (setup_data.compatible_version > JAILHOUSE_SETUP_REQUIRED_VERSION)
183 panic("Jailhouse: Unsupported setup data structure");
184
185 pmtmr_ioport = setup_data.pm_timer_address;
186 pr_debug("Jailhouse: PM-Timer IO Port: %#x\n", pmtmr_ioport);
187
188 precalibrated_tsc_khz = setup_data.tsc_khz;
189 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
190
191 pci_probe = 0;
192
193 /*
194 * Avoid that the kernel complains about missing ACPI tables - there
195 * are none in a non-root cell.
196 */
197 disable_acpi();
198}
199
200bool jailhouse_paravirt(void)
201{
202 return jailhouse_cpuid_base() != 0;
203}
204
205static bool jailhouse_x2apic_available(void)
206{
207 /*
208 * The x2APIC is only available if the root cell enabled it. Jailhouse
209 * does not support switching between xAPIC and x2APIC.
210 */
211 return x2apic_enabled();
212}
213
214const struct hypervisor_x86 x86_hyper_jailhouse __refconst = {
215 .name = "Jailhouse",
216 .detect = jailhouse_detect,
217 .init.init_platform = jailhouse_init_platform,
218 .init.x2apic_available = jailhouse_x2apic_available,
219};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Jailhouse paravirt_ops implementation
4 *
5 * Copyright (c) Siemens AG, 2015-2017
6 *
7 * Authors:
8 * Jan Kiszka <jan.kiszka@siemens.com>
9 */
10
11#include <linux/acpi_pmtmr.h>
12#include <linux/kernel.h>
13#include <linux/reboot.h>
14#include <linux/serial_8250.h>
15#include <linux/acpi.h>
16#include <asm/apic.h>
17#include <asm/io_apic.h>
18#include <asm/acpi.h>
19#include <asm/cpu.h>
20#include <asm/hypervisor.h>
21#include <asm/i8259.h>
22#include <asm/irqdomain.h>
23#include <asm/pci_x86.h>
24#include <asm/reboot.h>
25#include <asm/setup.h>
26#include <asm/jailhouse_para.h>
27
28static struct jailhouse_setup_data setup_data;
29#define SETUP_DATA_V1_LEN (sizeof(setup_data.hdr) + sizeof(setup_data.v1))
30#define SETUP_DATA_V2_LEN (SETUP_DATA_V1_LEN + sizeof(setup_data.v2))
31
32static unsigned int precalibrated_tsc_khz;
33
34static void jailhouse_setup_irq(unsigned int irq)
35{
36 struct mpc_intsrc mp_irq = {
37 .type = MP_INTSRC,
38 .irqtype = mp_INT,
39 .irqflag = MP_IRQPOL_ACTIVE_HIGH | MP_IRQTRIG_EDGE,
40 .srcbusirq = irq,
41 .dstirq = irq,
42 };
43 mp_save_irq(&mp_irq);
44}
45
46static uint32_t jailhouse_cpuid_base(void)
47{
48 if (boot_cpu_data.cpuid_level < 0 ||
49 !boot_cpu_has(X86_FEATURE_HYPERVISOR))
50 return 0;
51
52 return hypervisor_cpuid_base("Jailhouse\0\0\0", 0);
53}
54
55static uint32_t __init jailhouse_detect(void)
56{
57 return jailhouse_cpuid_base();
58}
59
60static void jailhouse_get_wallclock(struct timespec64 *now)
61{
62 memset(now, 0, sizeof(*now));
63}
64
65static void __init jailhouse_timer_init(void)
66{
67 lapic_timer_period = setup_data.v1.apic_khz * (1000 / HZ);
68}
69
70static unsigned long jailhouse_get_tsc(void)
71{
72 return precalibrated_tsc_khz;
73}
74
75static void __init jailhouse_x2apic_init(void)
76{
77#ifdef CONFIG_X86_X2APIC
78 if (!x2apic_enabled())
79 return;
80 /*
81 * We do not have access to IR inside Jailhouse non-root cells. So
82 * we have to run in physical mode.
83 */
84 x2apic_phys = 1;
85 /*
86 * This will trigger the switch to apic_x2apic_phys. Empty OEM IDs
87 * ensure that only this APIC driver picks up the call.
88 */
89 default_acpi_madt_oem_check("", "");
90#endif
91}
92
93static void __init jailhouse_parse_smp_config(void)
94{
95 struct ioapic_domain_cfg ioapic_cfg = {
96 .type = IOAPIC_DOMAIN_STRICT,
97 .ops = &mp_ioapic_irqdomain_ops,
98 };
99 unsigned int cpu;
100
101 jailhouse_x2apic_init();
102
103 register_lapic_address(0xfee00000);
104
105 for (cpu = 0; cpu < setup_data.v1.num_cpus; cpu++)
106 topology_register_apic(setup_data.v1.cpu_ids[cpu], CPU_ACPIID_INVALID, true);
107
108 smp_found_config = 1;
109
110 if (setup_data.v1.standard_ioapic) {
111 mp_register_ioapic(0, 0xfec00000, gsi_top, &ioapic_cfg);
112
113 if (IS_ENABLED(CONFIG_SERIAL_8250) &&
114 setup_data.hdr.version < 2) {
115 /* Register 1:1 mapping for legacy UART IRQs 3 and 4 */
116 jailhouse_setup_irq(3);
117 jailhouse_setup_irq(4);
118 }
119 }
120}
121
122static void jailhouse_no_restart(void)
123{
124 pr_notice("Jailhouse: Restart not supported, halting\n");
125 machine_halt();
126}
127
128static int __init jailhouse_pci_arch_init(void)
129{
130 pci_direct_init(1);
131
132 /*
133 * There are no bridges on the virtual PCI root bus under Jailhouse,
134 * thus no other way to discover all devices than a full scan.
135 * Respect any overrides via the command line, though.
136 */
137 if (pcibios_last_bus < 0)
138 pcibios_last_bus = 0xff;
139
140#ifdef CONFIG_PCI_MMCONFIG
141 if (setup_data.v1.pci_mmconfig_base) {
142 pci_mmconfig_add(0, 0, pcibios_last_bus,
143 setup_data.v1.pci_mmconfig_base);
144 pci_mmcfg_arch_init();
145 }
146#endif
147
148 return 0;
149}
150
151#ifdef CONFIG_SERIAL_8250
152static inline bool jailhouse_uart_enabled(unsigned int uart_nr)
153{
154 return setup_data.v2.flags & BIT(uart_nr);
155}
156
157static void jailhouse_serial_fixup(int port, struct uart_port *up,
158 u32 *capabilities)
159{
160 static const u16 pcuart_base[] = {0x3f8, 0x2f8, 0x3e8, 0x2e8};
161 unsigned int n;
162
163 for (n = 0; n < ARRAY_SIZE(pcuart_base); n++) {
164 if (pcuart_base[n] != up->iobase)
165 continue;
166
167 if (jailhouse_uart_enabled(n)) {
168 pr_info("Enabling UART%u (port 0x%lx)\n", n,
169 up->iobase);
170 jailhouse_setup_irq(up->irq);
171 } else {
172 /* Deactivate UART if access isn't allowed */
173 up->iobase = 0;
174 }
175 break;
176 }
177}
178
179static void __init jailhouse_serial_workaround(void)
180{
181 /*
182 * There are flags inside setup_data that indicate availability of
183 * platform UARTs since setup data version 2.
184 *
185 * In case of version 1, we don't know which UARTs belong Linux. In
186 * this case, unconditionally register 1:1 mapping for legacy UART IRQs
187 * 3 and 4.
188 */
189 if (setup_data.hdr.version > 1)
190 serial8250_set_isa_configurator(jailhouse_serial_fixup);
191}
192#else /* !CONFIG_SERIAL_8250 */
193static inline void jailhouse_serial_workaround(void)
194{
195}
196#endif /* CONFIG_SERIAL_8250 */
197
198static void __init jailhouse_init_platform(void)
199{
200 u64 pa_data = boot_params.hdr.setup_data;
201 unsigned long setup_data_len;
202 struct setup_data header;
203 void *mapping;
204
205 x86_init.irqs.pre_vector_init = x86_init_noop;
206 x86_init.timers.timer_init = jailhouse_timer_init;
207 x86_init.mpparse.find_mptable = x86_init_noop;
208 x86_init.mpparse.early_parse_smp_cfg = x86_init_noop;
209 x86_init.mpparse.parse_smp_cfg = jailhouse_parse_smp_config;
210 x86_init.pci.arch_init = jailhouse_pci_arch_init;
211
212 x86_platform.calibrate_cpu = jailhouse_get_tsc;
213 x86_platform.calibrate_tsc = jailhouse_get_tsc;
214 x86_platform.get_wallclock = jailhouse_get_wallclock;
215 x86_platform.legacy.rtc = 0;
216 x86_platform.legacy.warm_reset = 0;
217 x86_platform.legacy.i8042 = X86_LEGACY_I8042_PLATFORM_ABSENT;
218
219 legacy_pic = &null_legacy_pic;
220
221 machine_ops.emergency_restart = jailhouse_no_restart;
222
223 while (pa_data) {
224 mapping = early_memremap(pa_data, sizeof(header));
225 memcpy(&header, mapping, sizeof(header));
226 early_memunmap(mapping, sizeof(header));
227
228 if (header.type == SETUP_JAILHOUSE)
229 break;
230
231 pa_data = header.next;
232 }
233
234 if (!pa_data)
235 panic("Jailhouse: No valid setup data found");
236
237 /* setup data must at least contain the header */
238 if (header.len < sizeof(setup_data.hdr))
239 goto unsupported;
240
241 pa_data += offsetof(struct setup_data, data);
242 setup_data_len = min_t(unsigned long, sizeof(setup_data),
243 (unsigned long)header.len);
244 mapping = early_memremap(pa_data, setup_data_len);
245 memcpy(&setup_data, mapping, setup_data_len);
246 early_memunmap(mapping, setup_data_len);
247
248 if (setup_data.hdr.version == 0 ||
249 setup_data.hdr.compatible_version !=
250 JAILHOUSE_SETUP_REQUIRED_VERSION ||
251 (setup_data.hdr.version == 1 && header.len < SETUP_DATA_V1_LEN) ||
252 (setup_data.hdr.version >= 2 && header.len < SETUP_DATA_V2_LEN))
253 goto unsupported;
254
255 pmtmr_ioport = setup_data.v1.pm_timer_address;
256 pr_debug("Jailhouse: PM-Timer IO Port: %#x\n", pmtmr_ioport);
257
258 precalibrated_tsc_khz = setup_data.v1.tsc_khz;
259 setup_force_cpu_cap(X86_FEATURE_TSC_KNOWN_FREQ);
260
261 pci_probe = 0;
262
263 /*
264 * Avoid that the kernel complains about missing ACPI tables - there
265 * are none in a non-root cell.
266 */
267 disable_acpi();
268
269 jailhouse_serial_workaround();
270 return;
271
272unsupported:
273 panic("Jailhouse: Unsupported setup data structure");
274}
275
276bool jailhouse_paravirt(void)
277{
278 return jailhouse_cpuid_base() != 0;
279}
280
281static bool __init jailhouse_x2apic_available(void)
282{
283 /*
284 * The x2APIC is only available if the root cell enabled it. Jailhouse
285 * does not support switching between xAPIC and x2APIC.
286 */
287 return x2apic_enabled();
288}
289
290const struct hypervisor_x86 x86_hyper_jailhouse __refconst = {
291 .name = "Jailhouse",
292 .detect = jailhouse_detect,
293 .init.init_platform = jailhouse_init_platform,
294 .init.x2apic_available = jailhouse_x2apic_available,
295 .ignore_nopv = true,
296};