1// SPDX-License-Identifier: GPL-2.0
 2/dts-v1/;
 3
 4#include <dt-bindings/gpio/gpio.h>
 5#include <dt-bindings/input/input.h>
 
 6
 7#include "ar9331.dtsi"
 8
 9/ {
10	model = "DPTechnics DPT-Module";
11	compatible = "dptechnics,dpt-module";
12
13	aliases {
14		serial0 = &uart;
15	};
16
17	memory@0 {
18		device_type = "memory";
19		reg = <0x0 0x4000000>;
20	};
21
22	leds {
23		compatible = "gpio-leds";
24
25		system {
26			label = "dpt-module:green:system";
 
27			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
28			default-state = "off";
29		};
30	};
31
32	gpio-keys-polled {
33		compatible = "gpio-keys-polled";
34		#address-cells = <1>;
35		#size-cells = <0>;
36		poll-interval = <100>;
37
38		button@0 {
39			label = "reset";
40			linux,code = <KEY_RESTART>;
41			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
42		};
43	};
44};
45
46&ref {
47	clock-frequency = <25000000>;
48};
49
50&uart {
51	status = "okay";
52};
53
54&gpio {
55	status = "okay";
56};
57
58&usb {
59	dr_mode = "host";
60	status = "okay";
61};
62
63&usb_phy {
64	status = "okay";
65};
66
67&spi {
68	num-chipselects = <1>;
69	status = "okay";
70
71	/* Winbond 25Q128FVSG SPI flash */
72	spiflash: w25q128@0 {
73		#address-cells = <1>;
74		#size-cells = <1>;
75		compatible = "winbond,w25q128", "jedec,spi-nor";
76		spi-max-frequency = <104000000>;
77		reg = <0>;
78	};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
79};

 1// SPDX-License-Identifier: GPL-2.0
 2/dts-v1/;
 3
 4#include <dt-bindings/gpio/gpio.h>
 5#include <dt-bindings/input/input.h>
 6#include <dt-bindings/leds/common.h>
 7
 8#include "ar9331.dtsi"
 9
10/ {
11	model = "DPTechnics DPT-Module";
12	compatible = "dptechnics,dpt-module";
13
14	aliases {
15		serial0 = &uart;
16	};
17
18	memory@0 {
19		device_type = "memory";
20		reg = <0x0 0x4000000>;
21	};
22
23	leds {
24		compatible = "gpio-leds";
25
26		led-0 {
27			function = LED_FUNCTION_STATUS;
28			color = <LED_COLOR_ID_GREEN>;
29			gpios = <&gpio 27 GPIO_ACTIVE_LOW>;
30			default-state = "off";
31		};
32	};
33
34	gpio-keys {
35		compatible = "gpio-keys";
 
 
 
36
37		button-0 {
38			label = "reset";
39			linux,code = <KEY_RESTART>;
40			gpios = <&gpio 11 GPIO_ACTIVE_LOW>;
41		};
42	};
43};
44
45&ref {
46	clock-frequency = <25000000>;
47};
48
49&uart {
50	status = "okay";
51};
52
53&gpio {
54	status = "okay";
55};
56
57&usb {
58	dr_mode = "host";
59	status = "okay";
60};
61
62&usb_phy {
63	status = "okay";
64};
65
66&spi {
67	num-chipselects = <1>;
68	status = "okay";
69
70	/* Winbond 25Q128FVSG SPI flash */
71	spiflash: w25q128@0 {
72		#address-cells = <1>;
73		#size-cells = <1>;
74		compatible = "winbond,w25q128", "jedec,spi-nor";
75		spi-max-frequency = <104000000>;
76		reg = <0>;
77	};
78};
79
80&eth0 {
81	status = "okay";
82};
83
84&eth1 {
85	status = "okay";
86};
87
88&switch_port1 {
89	label = "lan0";
90	status = "okay";
91};
92
93&phy_port0 {
94	status = "okay";
95};
96
97&phy_port4 {
98	status = "okay";
99};