1// SPDX-License-Identifier: GPL-2.0
  2/*
  3 * Copyright (C) 2013 Maxime Hadjinlian <maxime.hadjinlian@gmail.com>
  4 *
  5 */
  6
  7/dts-v1/;
  8
  9#include <dt-bindings/gpio/gpio.h>
 10#include <dt-bindings/input/input.h>
 11#include "kirkwood.dtsi"
 12#include "kirkwood-6192.dtsi"
 13
 14/ {
 15	model = "LaCie LaPlug";
 16	compatible = "lacie,laplug", "marvell,kirkwood-88f6192", "marvell,kirkwood";
 17
 18	memory {
 19		device_type = "memory";
 20		reg = <0x00000000 0x8000000>; /* 128 MB */
 21	};
 22
 23	chosen {
 24		bootargs = "console=ttyS0,115200n8 earlyprintk";
 25		stdout-path = &uart0;
 26	};
 27
 28	ocp@f1000000 {
 29		serial@12000 {
 30			status = "okay";
 31		};
 32
 33		i2c@11000 {
 34			status = "okay";
 35
 36			eeprom@50 {
 37				compatible = "atmel,24c04";
 38				pagesize = <16>;
 39				reg = <0x50>;
 40			};
 41		};
 42
 43		pinctrl: pin-controller@10000 {
 44			pmx_usb_power_enable: pmx-usb-power-enable {
 45				marvell,pins = "mpp14";
 46				marvell,function = "gpio";
 47			};
 48		};
 49	};
 50
 51	gpio_keys {
 52		compatible = "gpio-keys";
 53
 54		power {
 55			label = "Power push button";
 56			linux,code = <KEY_POWER>;
 57			gpios = <&gpio1 0 GPIO_ACTIVE_HIGH>;
 58		};
 59	};
 60
 61	gpio-leds {
 62		compatible = "gpio-leds";
 63
 64		red-fail {
 65			label = "laplug_v2:red:power";
 66			gpios = <&gpio0 12 GPIO_ACTIVE_HIGH>;
 67		};
 68		blue-power {
 69			label = "laplug_v2:blue:power";
 70			gpios = <&gpio0 29 GPIO_ACTIVE_HIGH>;
 71			linux,default-trigger = "default-on";
 72		};
 73	};
 74
 75	gpio_poweroff {
 76		compatible = "gpio-poweroff";
 77		gpios = <&gpio0 31 GPIO_ACTIVE_HIGH>;
 78	};
 79
 80	regulators {
 81		compatible = "simple-bus";
 82		#address-cells = <1>;
 83		#size-cells = <0>;
 84		pinctrl-0 = <&pmx_usb_power_enable>;
 85		pinctrl-names = "default";
 86
 87		usb_power_back1: regulator@1 {
 88			compatible = "regulator-fixed";
 89			reg = <1>;
 90			regulator-name = "USB Power Back 1";
 91			regulator-min-microvolt = <5000000>;
 92			regulator-max-microvolt = <5000000>;
 93			enable-active-high;
 94			regulator-always-on;
 95			regulator-boot-on;
 96			gpio = <&gpio0 15 GPIO_ACTIVE_HIGH>;
 97		};
 98
 99		usb_power_back2: regulator@2 {
100			compatible = "regulator-fixed";
101			reg = <2>;
102			regulator-name = "USB Power Back 2";
103			regulator-min-microvolt = <5000000>;
104			regulator-max-microvolt = <5000000>;
105			enable-active-high;
106			regulator-always-on;
107			regulator-boot-on;
108			gpio = <&gpio0 28 GPIO_ACTIVE_HIGH>;
109		};
110
111		usb_power_front: regulator@3 {
112			compatible = "regulator-fixed";
113			reg = <3>;
114			regulator-name = "USB Power Front";
115			regulator-min-microvolt = <5000000>;
116			regulator-max-microvolt = <5000000>;
117			enable-active-high;
118			regulator-always-on;
119			regulator-boot-on;
120			gpio = <&gpio1 3 GPIO_ACTIVE_HIGH>;
121		};
122	};
123};
124
125&nand {
126	/* Total size : 512MB */
127	status = "okay";
128
129	partition@0 {
130		label = "u-boot";
131		reg = <0x0 0x100000>; /* 1MB */
132		read-only;
133	};
134
135	partition@100000 {
136		label = "uImage";
137		reg = <0x100000 0x1000000>; /* 16MB */
138	};
139
140	partition@1100000 {
141		label = "rootfs";
142		reg = <0x1100000 0x1EF00000>; /* 495MB */
143	};
144};
145
146&mdio {
147	status = "okay";
148
149	ethphy0: ethernet-phy@0 {
150		device_type = "ethernet-phy";
151		reg = <0>;
152	};
153};
154
155&eth0 {
156	status = "okay";
157	ethernet0-port@0 {
158		phy-handle = <&ethphy0>;
159	};
160};
161
162&pciec {
163        status = "okay";
164};
165
166&pcie0 {
167	status = "okay";
168};