1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
  2
  3/dts-v1/;
  4
  5#include <dt-bindings/gpio/gpio.h>
  6#include "imx6q-ba16.dtsi"
  7
  8/ {
  9	model = "Advantech DMS-BA16";
 10	compatible = "advantech,imx6q-dms-ba16", "advantech,imx6q-ba16", "fsl,imx6q";
 11
 12	reg_usb_otg_vbus: regulator-usbotgvbus {
 13		compatible = "regulator-fixed";
 14		regulator-name = "usb_otg_vbus";
 15		regulator-min-microvolt = <5000000>;
 16		regulator-max-microvolt = <5000000>;
 17		pinctrl-names = "default";
 18		pinctrl-0 = <&pinctrl_usbotgvbus>;
 19		gpio = <&gpio4 15 GPIO_ACTIVE_HIGH>;
 20		enable-active-high;
 21	};
 22
 23	sys_mclk: clock-sys-mclk {
 24		compatible = "fixed-clock";
 25		#clock-cells = <0>;
 26		clock-frequency = <22000000>;
 27	};
 28
 29	sound {
 30		compatible = "fsl,imx6q-ba16-sgtl5000",
 31			     "fsl,imx-audio-sgtl5000";
 32		model = "imx6q-ba16-sgtl5000";
 33		ssi-controller = <&ssi1>;
 34		audio-codec = <&sgtl5000>;
 35		audio-routing =
 36			"MIC_IN", "Mic Jack",
 37			"Mic Jack", "Mic Bias",
 38			"Headphone Jack", "HP_OUT";
 39		mux-int-port = <1>;
 40		mux-ext-port = <4>;
 41	};
 42};
 43
 44&ecspi5 {
 45	cs-gpios = <&gpio1 17 GPIO_ACTIVE_HIGH>;
 46	pinctrl-names = "default";
 47	pinctrl-0 = <&pinctrl_ecspi5>;
 48	status = "okay";
 49
 50	m25_eeprom: m25p80@0 {
 51		compatible = "atmel,at25256B", "atmel,at25";
 52		spi-max-frequency = <20000000>;
 53		size = <0x8000>;
 54		pagesize = <64>;
 55		reg = <0>;
 56		address-width = <16>;
 57	};
 58};
 59
 60&iomuxc {
 61	pinctrl_i2c1_gpio: i2c1gpiogrp {
 62		fsl,pins = <
 63			MX6QDL_PAD_CSI0_DAT8__GPIO5_IO26        0x1b0b0
 64			MX6QDL_PAD_CSI0_DAT9__GPIO5_IO27        0x1b0b0
 65		>;
 66	};
 67
 68	pinctrl_i2c2_gpio: i2c2gpiogrp {
 69		fsl,pins = <
 70			MX6QDL_PAD_KEY_COL3__GPIO4_IO12 0x1b0b0
 71			MX6QDL_PAD_KEY_ROW3__GPIO4_IO13 0x1b0b0
 72		>;
 73	};
 74
 75	pinctrl_i2c3_gpio: i2c3gpiogrp {
 76		fsl,pins = <
 77			MX6QDL_PAD_GPIO_3__GPIO1_IO03   0x1b0b0
 78			MX6QDL_PAD_GPIO_6__GPIO1_IO06   0x1b0b0
 79		>;
 80	};
 81
 82	pinctrl_usbotgvbus: usbotgvbusgrp {
 83		fsl,pins = <
 84			MX6QDL_PAD_ENET_RX_ER__USB_OTG_ID 0x17059
 85			MX6QDL_PAD_KEY_ROW4__GPIO4_IO15 0x000b0
 86		>;
 87	};
 88};
 89
 90&i2c1 {
 91	clock-frequency = <100000>;
 92	pinctrl-names = "default";
 93	pinctrl-0 = <&pinctrl_i2c1>;
 94	status = "okay";
 95
 96	sgtl5000: codec@a {
 97		compatible = "fsl,sgtl5000";
 98		reg = <0x0a>;
 99		clocks = <&sys_mclk>;
100		lrclk-strength = <0x3>;
101		VDDA-supply = <&reg_1p8v>;
102		VDDIO-supply = <&reg_3p3v>;
103	};
104};
105
106&pwm2 {
107	pinctrl-names = "default";
108	pinctrl-0 = <&pinctrl_pwm2>;
109	status = "okay";
110};
111
112&sata {
113	fsl,no-spread-spectrum;
114	fsl,transmit-atten-16ths = <12>;
115	fsl,transmit-boost-mdB = <3330>;
116	fsl,transmit-level-mV = <1133>;
117	fsl,receive-dpll-mode = <1>;
118	status = "okay";
119};
120
121&usbotg {
122	vbus-supply = <&reg_usb_otg_vbus>;
123	pinctrl-names = "default";
124	pinctrl-0 = <&pinctrl_usbotg>;
125	dr_mode = "otg";
126	disable-over-current;
127	status = "okay";
128};
129
130&usdhc4 {
131	pinctrl-names = "default";
132	pinctrl-0 = <&pinctrl_usdhc4>;
133	bus-width = <8>;
134	cd-gpios = <&gpio6 11 GPIO_ACTIVE_LOW>;
135	no-1-8-v;
136	keep-power-in-suspend;
137	wakeup-source;
138	status = "okay";
139};