1/*
  2 *  BSD LICENSE
  3 *
  4 *  Copyright(c) 2016 Broadcom.  All rights reserved.
  5 *
  6 *  Redistribution and use in source and binary forms, with or without
  7 *  modification, are permitted provided that the following conditions
  8 *  are met:
  9 *
 10 *    * Redistributions of source code must retain the above copyright
 11 *      notice, this list of conditions and the following disclaimer.
 12 *    * Redistributions in binary form must reproduce the above copyright
 13 *      notice, this list of conditions and the following disclaimer in
 14 *      the documentation and/or other materials provided with the
 15 *      distribution.
 16 *    * Neither the name of Broadcom Corporation nor the names of its
 17 *      contributors may be used to endorse or promote products derived
 18 *      from this software without specific prior written permission.
 19 *
 20 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 21 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 22 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 23 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 24 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 25 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 26 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 27 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 28 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 29 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 30 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 31 */
 32
 33/dts-v1/;
 34
 35#include "bcm-nsp.dtsi"
 36#include <dt-bindings/gpio/gpio.h>
 37
 38/ {
 39	model = "NorthStar Plus SVK (BCM958625HR)";
 40	compatible = "brcm,bcm58625", "brcm,nsp";
 41
 42	aliases {
 43		serial0 = &uart0;
 44	};
 45
 46	chosen {
 47		stdout-path = "serial0:115200n8";
 48	};
 49
 50	memory {
 51		device_type = "memory";
 52		reg = <0x60000000 0x20000000>;
 53	};
 54
 55	gpio-restart {
 56		compatible = "gpio-restart";
 57		gpios = <&gpioa 15 GPIO_ACTIVE_LOW>;
 58		open-source;
 59		priority = <200>;
 60	};
 61};
 62
 63&amac0 {
 64	status = "okay";
 65};
 66
 67&amac1 {
 68	status = "okay";
 69};
 70
 71&amac2 {
 72	status = "okay";
 73};
 74
 75&ehci0 {
 76	status = "okay";
 77};
 78
 79&nand {
 80	nandcs@0 {
 81		compatible = "brcm,nandcs";
 82		reg = <0>;
 83		nand-on-flash-bbt;
 84
 85		#address-cells = <1>;
 86		#size-cells = <1>;
 87
 88		nand-ecc-strength = <24>;
 89		nand-ecc-step-size = <1024>;
 90
 91		brcm,nand-oob-sector-size = <27>;
 92
 93		partition@0 {
 94			label = "nboot";
 95			reg = <0x00000000 0x00200000>;
 96			read-only;
 97		};
 98		partition@200000 {
 99			label = "nenv";
100			reg = <0x00200000 0x00400000>;
101		};
102		partition@600000 {
103			label = "nsystem";
104			reg = <0x00600000 0x00a00000>;
105		};
106		partition@1000000 {
107			label = "nrootfs";
108			reg = <0x01000000 0x03000000>;
109		};
110		partition@4000000 {
111			label = "ncustfs";
112			reg = <0x04000000 0x3c000000>;
113		};
114	};
115};
116
117&ohci0 {
118	status = "okay";
119};
120
121&pcie0 {
122	status = "okay";
123};
124
125&pcie1 {
126	status = "okay";
127};
128
129&pinctrl {
130	pinctrl-names = "default";
131	pinctrl-0 = <&nand_sel>;
132	nand_sel: nand_sel {
133		function = "nand";
134		groups = "nand_grp";
135	};
136};
137
138&qspi {
139	bspi-sel = <0>;
140	flash: m25p80@0 {
141		#address-cells = <1>;
142		#size-cells = <1>;
143		compatible = "m25p80";
144		reg = <0x0>;
145		spi-max-frequency = <12500000>;
146		m25p,fast-read;
147		spi-cpol;
148		spi-cpha;
149
150		partition@0 {
151			label = "boot";
152			reg = <0x00000000 0x000a0000>;
153		};
154
155		partition@a0000 {
156			label = "env";
157			reg = <0x000a0000 0x00060000>;
158		};
159
160		partition@100000 {
161			label = "system";
162			reg = <0x00100000 0x00600000>;
163		};
164
165		partition@700000 {
166			label = "rootfs";
167			reg = <0x00700000 0x01900000>;
168		};
169	};
170};
171
172&sata_phy0 {
173	status = "okay";
174};
175
176&sata_phy1 {
177	status = "okay";
178};
179
180&srab {
181	compatible = "brcm,bcm58625-srab", "brcm,nsp-srab";
182	status = "okay";
183
184	ports {
185		#address-cells = <1>;
186		#size-cells = <0>;
187
188		port@0 {
189			label = "port0";
190			reg = <0>;
191		};
192
193		port@1 {
194			label = "port1";
195			reg = <1>;
196		};
197
198		port@2 {
199			label = "port2";
200			reg = <2>;
201		};
202
203		port@3 {
204			label = "port3";
205			reg = <3>;
206		};
207
208		port@4 {
209			label = "port4";
210			reg = <4>;
211		};
212
213		port@8 {
214			ethernet = <&amac2>;
215			label = "cpu";
216			reg = <8>;
217			fixed-link {
218				speed = <1000>;
219				full-duplex;
220			};
221		};
222	};
223};
224
225&uart0 {
226	status = "okay";
227};
228
229&usb3_phy {
230	status = "okay";
231};
232
233&xhci {
234	status = "okay";
235};