Loading...
1#!/bin/sh
2# SPDX-License-Identifier: GPL-2.0
3#
4# link vmlinux
5#
6# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_INIT) and
7# $(KBUILD_VMLINUX_MAIN) and $(KBUILD_VMLINUX_LIBS). Most are built-in.a files
8# from top-level directories in the kernel tree, others are specified in
9# arch/$(ARCH)/Makefile. Ordering when linking is important, and
10# $(KBUILD_VMLINUX_INIT) must be first. $(KBUILD_VMLINUX_LIBS) are archives
11# which are linked conditionally (not within --whole-archive), and do not
12# require symbol indexes added.
13#
14# vmlinux
15# ^
16# |
17# +-< $(KBUILD_VMLINUX_INIT)
18# | +--< init/version.o + more
19# |
20# +--< $(KBUILD_VMLINUX_MAIN)
21# | +--< drivers/built-in.a mm/built-in.a + more
22# |
23# +--< $(KBUILD_VMLINUX_LIBS)
24# | +--< lib/lib.a + more
25# |
26# +-< ${kallsymso} (see description in KALLSYMS section)
27#
28# vmlinux version (uname -v) cannot be updated during normal
29# descending-into-subdirs phase since we do not yet know if we need to
30# update vmlinux.
31# Therefore this step is delayed until just before final link of vmlinux.
32#
33# System.map is generated to document addresses of all kernel symbols
34
35# Error out on error
36set -e
37
38# Nice output in kbuild format
39# Will be supressed by "make -s"
40info()
41{
42 if [ "${quiet}" != "silent_" ]; then
43 printf " %-7s %s\n" ${1} ${2}
44 fi
45}
46
47# Thin archive build here makes a final archive with symbol table and indexes
48# from vmlinux objects INIT and MAIN, which can be used as input to linker.
49# KBUILD_VMLINUX_LIBS archives should already have symbol table and indexes
50# added.
51#
52# Traditional incremental style of link does not require this step
53#
54# built-in.a output file
55#
56archive_builtin()
57{
58 info AR built-in.a
59 rm -f built-in.a;
60 ${AR} rcsTP${KBUILD_ARFLAGS} built-in.a \
61 ${KBUILD_VMLINUX_INIT} \
62 ${KBUILD_VMLINUX_MAIN}
63}
64
65# Link of vmlinux.o used for section mismatch analysis
66# ${1} output file
67modpost_link()
68{
69 local objects
70
71 objects="--whole-archive \
72 built-in.a \
73 --no-whole-archive \
74 --start-group \
75 ${KBUILD_VMLINUX_LIBS} \
76 --end-group"
77
78 ${LD} ${LDFLAGS} -r -o ${1} ${objects}
79}
80
81# Link of vmlinux
82# ${1} - optional extra .o files
83# ${2} - output file
84vmlinux_link()
85{
86 local lds="${objtree}/${KBUILD_LDS}"
87 local objects
88
89 if [ "${SRCARCH}" != "um" ]; then
90 objects="--whole-archive \
91 built-in.a \
92 --no-whole-archive \
93 --start-group \
94 ${KBUILD_VMLINUX_LIBS} \
95 --end-group \
96 ${1}"
97
98 ${LD} ${LDFLAGS} ${LDFLAGS_vmlinux} -o ${2} \
99 -T ${lds} ${objects}
100 else
101 objects="-Wl,--whole-archive \
102 built-in.a \
103 -Wl,--no-whole-archive \
104 -Wl,--start-group \
105 ${KBUILD_VMLINUX_LIBS} \
106 -Wl,--end-group \
107 ${1}"
108
109 ${CC} ${CFLAGS_vmlinux} -o ${2} \
110 -Wl,-T,${lds} \
111 ${objects} \
112 -lutil -lrt -lpthread
113 rm -f linux
114 fi
115}
116
117
118# Create ${2} .o file with all symbols from the ${1} object file
119kallsyms()
120{
121 info KSYM ${2}
122 local kallsymopt;
123
124 if [ -n "${CONFIG_HAVE_UNDERSCORE_SYMBOL_PREFIX}" ]; then
125 kallsymopt="${kallsymopt} --symbol-prefix=_"
126 fi
127
128 if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
129 kallsymopt="${kallsymopt} --all-symbols"
130 fi
131
132 if [ -n "${CONFIG_KALLSYMS_ABSOLUTE_PERCPU}" ]; then
133 kallsymopt="${kallsymopt} --absolute-percpu"
134 fi
135
136 if [ -n "${CONFIG_KALLSYMS_BASE_RELATIVE}" ]; then
137 kallsymopt="${kallsymopt} --base-relative"
138 fi
139
140 local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
141 ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
142
143 local afile="`basename ${2} .o`.S"
144
145 ${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${afile}
146 ${CC} ${aflags} -c -o ${2} ${afile}
147}
148
149# Create map file with all symbols from ${1}
150# See mksymap for additional details
151mksysmap()
152{
153 ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
154}
155
156sortextable()
157{
158 ${objtree}/scripts/sortextable ${1}
159}
160
161# Delete output files in case of error
162cleanup()
163{
164 rm -f .tmp_System.map
165 rm -f .tmp_kallsyms*
166 rm -f .tmp_vmlinux*
167 rm -f built-in.a
168 rm -f System.map
169 rm -f vmlinux
170 rm -f vmlinux.o
171}
172
173on_exit()
174{
175 if [ $? -ne 0 ]; then
176 cleanup
177 fi
178}
179trap on_exit EXIT
180
181on_signals()
182{
183 exit 1
184}
185trap on_signals HUP INT QUIT TERM
186
187#
188#
189# Use "make V=1" to debug this script
190case "${KBUILD_VERBOSE}" in
191*1*)
192 set -x
193 ;;
194esac
195
196if [ "$1" = "clean" ]; then
197 cleanup
198 exit 0
199fi
200
201# We need access to CONFIG_ symbols
202case "${KCONFIG_CONFIG}" in
203*/*)
204 . "${KCONFIG_CONFIG}"
205 ;;
206*)
207 # Force using a file from the current directory
208 . "./${KCONFIG_CONFIG}"
209esac
210
211# Update version
212info GEN .version
213if [ -r .version ]; then
214 VERSION=$(expr 0$(cat .version) + 1)
215 echo $VERSION > .version
216else
217 rm -f .version
218 echo 1 > .version
219fi;
220
221# final build of init/
222${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init
223
224archive_builtin
225
226#link vmlinux.o
227info LD vmlinux.o
228modpost_link vmlinux.o
229
230# modpost vmlinux.o to check for section mismatches
231${MAKE} -f "${srctree}/scripts/Makefile.modpost" vmlinux.o
232
233kallsymso=""
234kallsyms_vmlinux=""
235if [ -n "${CONFIG_KALLSYMS}" ]; then
236
237 # kallsyms support
238 # Generate section listing all symbols and add it into vmlinux
239 # It's a three step process:
240 # 1) Link .tmp_vmlinux1 so it has all symbols and sections,
241 # but __kallsyms is empty.
242 # Running kallsyms on that gives us .tmp_kallsyms1.o with
243 # the right size
244 # 2) Link .tmp_vmlinux2 so it now has a __kallsyms section of
245 # the right size, but due to the added section, some
246 # addresses have shifted.
247 # From here, we generate a correct .tmp_kallsyms2.o
248 # 3) That link may have expanded the kernel image enough that
249 # more linker branch stubs / trampolines had to be added, which
250 # introduces new names, which further expands kallsyms. Do another
251 # pass if that is the case. In theory it's possible this results
252 # in even more stubs, but unlikely.
253 # KALLSYMS_EXTRA_PASS=1 may also used to debug or work around
254 # other bugs.
255 # 4) The correct ${kallsymso} is linked into the final vmlinux.
256 #
257 # a) Verify that the System.map from vmlinux matches the map from
258 # ${kallsymso}.
259
260 kallsymso=.tmp_kallsyms2.o
261 kallsyms_vmlinux=.tmp_vmlinux2
262
263 # step 1
264 vmlinux_link "" .tmp_vmlinux1
265 kallsyms .tmp_vmlinux1 .tmp_kallsyms1.o
266
267 # step 2
268 vmlinux_link .tmp_kallsyms1.o .tmp_vmlinux2
269 kallsyms .tmp_vmlinux2 .tmp_kallsyms2.o
270
271 # step 3
272 size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" .tmp_kallsyms1.o)
273 size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" .tmp_kallsyms2.o)
274
275 if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
276 kallsymso=.tmp_kallsyms3.o
277 kallsyms_vmlinux=.tmp_vmlinux3
278
279 vmlinux_link .tmp_kallsyms2.o .tmp_vmlinux3
280
281 kallsyms .tmp_vmlinux3 .tmp_kallsyms3.o
282 fi
283fi
284
285info LD vmlinux
286vmlinux_link "${kallsymso}" vmlinux
287
288if [ -n "${CONFIG_BUILDTIME_EXTABLE_SORT}" ]; then
289 info SORTEX vmlinux
290 sortextable vmlinux
291fi
292
293info SYSMAP System.map
294mksysmap vmlinux System.map
295
296# step a (see comment above)
297if [ -n "${CONFIG_KALLSYMS}" ]; then
298 mksysmap ${kallsyms_vmlinux} .tmp_System.map
299
300 if ! cmp -s System.map .tmp_System.map; then
301 echo >&2 Inconsistent kallsyms data
302 echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
303 exit 1
304 fi
305fi
1#!/bin/sh
2# SPDX-License-Identifier: GPL-2.0
3#
4# link vmlinux
5#
6# vmlinux is linked from the objects selected by $(KBUILD_VMLINUX_OBJS) and
7# $(KBUILD_VMLINUX_LIBS). Most are built-in.a files from top-level directories
8# in the kernel tree, others are specified in arch/$(ARCH)/Makefile.
9# $(KBUILD_VMLINUX_LIBS) are archives which are linked conditionally
10# (not within --whole-archive), and do not require symbol indexes added.
11#
12# vmlinux
13# ^
14# |
15# +--< $(KBUILD_VMLINUX_OBJS)
16# | +--< init/built-in.a drivers/built-in.a mm/built-in.a + more
17# |
18# +--< $(KBUILD_VMLINUX_LIBS)
19# | +--< lib/lib.a + more
20# |
21# +-< ${kallsymso} (see description in KALLSYMS section)
22#
23# vmlinux version (uname -v) cannot be updated during normal
24# descending-into-subdirs phase since we do not yet know if we need to
25# update vmlinux.
26# Therefore this step is delayed until just before final link of vmlinux.
27#
28# System.map is generated to document addresses of all kernel symbols
29
30# Error out on error
31set -e
32
33LD="$1"
34KBUILD_LDFLAGS="$2"
35LDFLAGS_vmlinux="$3"
36
37# Nice output in kbuild format
38# Will be supressed by "make -s"
39info()
40{
41 if [ "${quiet}" != "silent_" ]; then
42 printf " %-7s %s\n" "${1}" "${2}"
43 fi
44}
45
46# Link of vmlinux.o used for section mismatch analysis
47# ${1} output file
48modpost_link()
49{
50 local objects
51
52 objects="--whole-archive \
53 ${KBUILD_VMLINUX_OBJS} \
54 --no-whole-archive \
55 --start-group \
56 ${KBUILD_VMLINUX_LIBS} \
57 --end-group"
58
59 ${LD} ${KBUILD_LDFLAGS} -r -o ${1} ${objects}
60}
61
62objtool_link()
63{
64 local objtoolopt;
65
66 if [ -n "${CONFIG_VMLINUX_VALIDATION}" ]; then
67 objtoolopt="check"
68 if [ -z "${CONFIG_FRAME_POINTER}" ]; then
69 objtoolopt="${objtoolopt} --no-fp"
70 fi
71 if [ -n "${CONFIG_GCOV_KERNEL}" ]; then
72 objtoolopt="${objtoolopt} --no-unreachable"
73 fi
74 if [ -n "${CONFIG_RETPOLINE}" ]; then
75 objtoolopt="${objtoolopt} --retpoline"
76 fi
77 if [ -n "${CONFIG_X86_SMAP}" ]; then
78 objtoolopt="${objtoolopt} --uaccess"
79 fi
80 info OBJTOOL ${1}
81 tools/objtool/objtool ${objtoolopt} ${1}
82 fi
83}
84
85# Link of vmlinux
86# ${1} - output file
87# ${2}, ${3}, ... - optional extra .o files
88vmlinux_link()
89{
90 local lds="${objtree}/${KBUILD_LDS}"
91 local output=${1}
92 local objects
93 local strip_debug
94
95 info LD ${output}
96
97 # skip output file argument
98 shift
99
100 # The kallsyms linking does not need debug symbols included.
101 if [ "$output" != "${output#.tmp_vmlinux.kallsyms}" ] ; then
102 strip_debug=-Wl,--strip-debug
103 fi
104
105 if [ "${SRCARCH}" != "um" ]; then
106 objects="--whole-archive \
107 ${KBUILD_VMLINUX_OBJS} \
108 --no-whole-archive \
109 --start-group \
110 ${KBUILD_VMLINUX_LIBS} \
111 --end-group \
112 ${@}"
113
114 ${LD} ${KBUILD_LDFLAGS} ${LDFLAGS_vmlinux} \
115 ${strip_debug#-Wl,} \
116 -o ${output} \
117 -T ${lds} ${objects}
118 else
119 objects="-Wl,--whole-archive \
120 ${KBUILD_VMLINUX_OBJS} \
121 -Wl,--no-whole-archive \
122 -Wl,--start-group \
123 ${KBUILD_VMLINUX_LIBS} \
124 -Wl,--end-group \
125 ${@}"
126
127 ${CC} ${CFLAGS_vmlinux} \
128 ${strip_debug} \
129 -o ${output} \
130 -Wl,-T,${lds} \
131 ${objects} \
132 -lutil -lrt -lpthread
133 rm -f linux
134 fi
135}
136
137# generate .BTF typeinfo from DWARF debuginfo
138# ${1} - vmlinux image
139# ${2} - file to dump raw BTF data into
140gen_btf()
141{
142 local pahole_ver
143
144 if ! [ -x "$(command -v ${PAHOLE})" ]; then
145 echo >&2 "BTF: ${1}: pahole (${PAHOLE}) is not available"
146 return 1
147 fi
148
149 pahole_ver=$(${PAHOLE} --version | sed -E 's/v([0-9]+)\.([0-9]+)/\1\2/')
150 if [ "${pahole_ver}" -lt "116" ]; then
151 echo >&2 "BTF: ${1}: pahole version $(${PAHOLE} --version) is too old, need at least v1.16"
152 return 1
153 fi
154
155 vmlinux_link ${1}
156
157 info "BTF" ${2}
158 LLVM_OBJCOPY=${OBJCOPY} ${PAHOLE} -J ${1}
159
160 # Create ${2} which contains just .BTF section but no symbols. Add
161 # SHF_ALLOC because .BTF will be part of the vmlinux image. --strip-all
162 # deletes all symbols including __start_BTF and __stop_BTF, which will
163 # be redefined in the linker script. Add 2>/dev/null to suppress GNU
164 # objcopy warnings: "empty loadable segment detected at ..."
165 ${OBJCOPY} --only-section=.BTF --set-section-flags .BTF=alloc,readonly \
166 --strip-all ${1} ${2} 2>/dev/null
167 # Change e_type to ET_REL so that it can be used to link final vmlinux.
168 # Unlike GNU ld, lld does not allow an ET_EXEC input.
169 printf '\1' | dd of=${2} conv=notrunc bs=1 seek=16 status=none
170}
171
172# Create ${2} .o file with all symbols from the ${1} object file
173kallsyms()
174{
175 info KSYM ${2}
176 local kallsymopt;
177
178 if [ -n "${CONFIG_KALLSYMS_ALL}" ]; then
179 kallsymopt="${kallsymopt} --all-symbols"
180 fi
181
182 if [ -n "${CONFIG_KALLSYMS_ABSOLUTE_PERCPU}" ]; then
183 kallsymopt="${kallsymopt} --absolute-percpu"
184 fi
185
186 if [ -n "${CONFIG_KALLSYMS_BASE_RELATIVE}" ]; then
187 kallsymopt="${kallsymopt} --base-relative"
188 fi
189
190 local aflags="${KBUILD_AFLAGS} ${KBUILD_AFLAGS_KERNEL} \
191 ${NOSTDINC_FLAGS} ${LINUXINCLUDE} ${KBUILD_CPPFLAGS}"
192
193 local afile="`basename ${2} .o`.S"
194
195 ${NM} -n ${1} | scripts/kallsyms ${kallsymopt} > ${afile}
196 ${CC} ${aflags} -c -o ${2} ${afile}
197}
198
199# Perform one step in kallsyms generation, including temporary linking of
200# vmlinux.
201kallsyms_step()
202{
203 kallsymso_prev=${kallsymso}
204 kallsyms_vmlinux=.tmp_vmlinux.kallsyms${1}
205 kallsymso=${kallsyms_vmlinux}.o
206
207 vmlinux_link ${kallsyms_vmlinux} "${kallsymso_prev}" ${btf_vmlinux_bin_o}
208 kallsyms ${kallsyms_vmlinux} ${kallsymso}
209}
210
211# Create map file with all symbols from ${1}
212# See mksymap for additional details
213mksysmap()
214{
215 ${CONFIG_SHELL} "${srctree}/scripts/mksysmap" ${1} ${2}
216}
217
218sorttable()
219{
220 ${objtree}/scripts/sorttable ${1}
221}
222
223# Delete output files in case of error
224cleanup()
225{
226 rm -f .btf.*
227 rm -f .tmp_System.map
228 rm -f .tmp_vmlinux*
229 rm -f System.map
230 rm -f vmlinux
231 rm -f vmlinux.o
232}
233
234on_exit()
235{
236 if [ $? -ne 0 ]; then
237 cleanup
238 fi
239}
240trap on_exit EXIT
241
242on_signals()
243{
244 exit 1
245}
246trap on_signals HUP INT QUIT TERM
247
248# Use "make V=1" to debug this script
249case "${KBUILD_VERBOSE}" in
250*1*)
251 set -x
252 ;;
253esac
254
255if [ "$1" = "clean" ]; then
256 cleanup
257 exit 0
258fi
259
260# We need access to CONFIG_ symbols
261. include/config/auto.conf
262
263# Update version
264info GEN .version
265if [ -r .version ]; then
266 VERSION=$(expr 0$(cat .version) + 1)
267 echo $VERSION > .version
268else
269 rm -f .version
270 echo 1 > .version
271fi;
272
273# final build of init/
274${MAKE} -f "${srctree}/scripts/Makefile.build" obj=init need-builtin=1
275
276#link vmlinux.o
277info LD vmlinux.o
278modpost_link vmlinux.o
279objtool_link vmlinux.o
280
281# modpost vmlinux.o to check for section mismatches
282${MAKE} -f "${srctree}/scripts/Makefile.modpost" MODPOST_VMLINUX=1
283
284info MODINFO modules.builtin.modinfo
285${OBJCOPY} -j .modinfo -O binary vmlinux.o modules.builtin.modinfo
286info GEN modules.builtin
287# The second line aids cases where multiple modules share the same object.
288tr '\0' '\n' < modules.builtin.modinfo | sed -n 's/^[[:alnum:]:_]*\.file=//p' |
289 tr ' ' '\n' | uniq | sed -e 's:^:kernel/:' -e 's/$/.ko/' > modules.builtin
290
291btf_vmlinux_bin_o=""
292if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
293 btf_vmlinux_bin_o=.btf.vmlinux.bin.o
294 if ! gen_btf .tmp_vmlinux.btf $btf_vmlinux_bin_o ; then
295 echo >&2 "Failed to generate BTF for vmlinux"
296 echo >&2 "Try to disable CONFIG_DEBUG_INFO_BTF"
297 exit 1
298 fi
299fi
300
301kallsymso=""
302kallsymso_prev=""
303kallsyms_vmlinux=""
304if [ -n "${CONFIG_KALLSYMS}" ]; then
305
306 # kallsyms support
307 # Generate section listing all symbols and add it into vmlinux
308 # It's a three step process:
309 # 1) Link .tmp_vmlinux1 so it has all symbols and sections,
310 # but __kallsyms is empty.
311 # Running kallsyms on that gives us .tmp_kallsyms1.o with
312 # the right size
313 # 2) Link .tmp_vmlinux2 so it now has a __kallsyms section of
314 # the right size, but due to the added section, some
315 # addresses have shifted.
316 # From here, we generate a correct .tmp_kallsyms2.o
317 # 3) That link may have expanded the kernel image enough that
318 # more linker branch stubs / trampolines had to be added, which
319 # introduces new names, which further expands kallsyms. Do another
320 # pass if that is the case. In theory it's possible this results
321 # in even more stubs, but unlikely.
322 # KALLSYMS_EXTRA_PASS=1 may also used to debug or work around
323 # other bugs.
324 # 4) The correct ${kallsymso} is linked into the final vmlinux.
325 #
326 # a) Verify that the System.map from vmlinux matches the map from
327 # ${kallsymso}.
328
329 kallsyms_step 1
330 kallsyms_step 2
331
332 # step 3
333 size1=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso_prev})
334 size2=$(${CONFIG_SHELL} "${srctree}/scripts/file-size.sh" ${kallsymso})
335
336 if [ $size1 -ne $size2 ] || [ -n "${KALLSYMS_EXTRA_PASS}" ]; then
337 kallsyms_step 3
338 fi
339fi
340
341vmlinux_link vmlinux "${kallsymso}" ${btf_vmlinux_bin_o}
342
343# fill in BTF IDs
344if [ -n "${CONFIG_DEBUG_INFO_BTF}" ]; then
345info BTFIDS vmlinux
346${RESOLVE_BTFIDS} vmlinux
347fi
348
349if [ -n "${CONFIG_BUILDTIME_TABLE_SORT}" ]; then
350 info SORTTAB vmlinux
351 if ! sorttable vmlinux; then
352 echo >&2 Failed to sort kernel tables
353 exit 1
354 fi
355fi
356
357info SYSMAP System.map
358mksysmap vmlinux System.map
359
360# step a (see comment above)
361if [ -n "${CONFIG_KALLSYMS}" ]; then
362 mksysmap ${kallsyms_vmlinux} .tmp_System.map
363
364 if ! cmp -s System.map .tmp_System.map; then
365 echo >&2 Inconsistent kallsyms data
366 echo >&2 Try "make KALLSYMS_EXTRA_PASS=1" as a workaround
367 exit 1
368 fi
369fi