Loading...
1/*
2 * OpenRISC entry.S
3 *
4 * Linux architectural port borrowing liberally from similar works of
5 * others. All original copyrights apply as per the original source
6 * declaration.
7 *
8 * Modifications for the OpenRISC architecture:
9 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
10 * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
11 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
12 *
13 * This program is free software; you can redistribute it and/or
14 * modify it under the terms of the GNU General Public License
15 * as published by the Free Software Foundation; either version
16 * 2 of the License, or (at your option) any later version.
17 */
18
19#include <linux/linkage.h>
20
21#include <asm/processor.h>
22#include <asm/unistd.h>
23#include <asm/thread_info.h>
24#include <asm/errno.h>
25#include <asm/spr_defs.h>
26#include <asm/page.h>
27#include <asm/mmu.h>
28#include <asm/pgtable.h>
29#include <asm/asm-offsets.h>
30
31#define DISABLE_INTERRUPTS(t1,t2) \
32 l.mfspr t2,r0,SPR_SR ;\
33 l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
34 l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
35 l.and t2,t2,t1 ;\
36 l.mtspr r0,t2,SPR_SR
37
38#define ENABLE_INTERRUPTS(t1) \
39 l.mfspr t1,r0,SPR_SR ;\
40 l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\
41 l.mtspr r0,t1,SPR_SR
42
43/* =========================================================[ macros ]=== */
44
45#ifdef CONFIG_TRACE_IRQFLAGS
46/*
47 * Trace irq on/off creating a stack frame.
48 */
49#define TRACE_IRQS_OP(trace_op) \
50 l.sw -8(r1),r2 /* store frame pointer */ ;\
51 l.sw -4(r1),r9 /* store return address */ ;\
52 l.addi r2,r1,0 /* move sp to fp */ ;\
53 l.jal trace_op ;\
54 l.addi r1,r1,-8 ;\
55 l.ori r1,r2,0 /* restore sp */ ;\
56 l.lwz r9,-4(r1) /* restore return address */ ;\
57 l.lwz r2,-8(r1) /* restore fp */ ;\
58/*
59 * Trace irq on/off and save registers we need that would otherwise be
60 * clobbered.
61 */
62#define TRACE_IRQS_SAVE(t1,trace_op) \
63 l.sw -12(r1),t1 /* save extra reg */ ;\
64 l.sw -8(r1),r2 /* store frame pointer */ ;\
65 l.sw -4(r1),r9 /* store return address */ ;\
66 l.addi r2,r1,0 /* move sp to fp */ ;\
67 l.jal trace_op ;\
68 l.addi r1,r1,-12 ;\
69 l.ori r1,r2,0 /* restore sp */ ;\
70 l.lwz r9,-4(r1) /* restore return address */ ;\
71 l.lwz r2,-8(r1) /* restore fp */ ;\
72 l.lwz t1,-12(r1) /* restore extra reg */
73
74#define TRACE_IRQS_OFF TRACE_IRQS_OP(trace_hardirqs_off)
75#define TRACE_IRQS_ON TRACE_IRQS_OP(trace_hardirqs_on)
76#define TRACE_IRQS_ON_SYSCALL \
77 TRACE_IRQS_SAVE(r10,trace_hardirqs_on) ;\
78 l.lwz r3,PT_GPR3(r1) ;\
79 l.lwz r4,PT_GPR4(r1) ;\
80 l.lwz r5,PT_GPR5(r1) ;\
81 l.lwz r6,PT_GPR6(r1) ;\
82 l.lwz r7,PT_GPR7(r1) ;\
83 l.lwz r8,PT_GPR8(r1) ;\
84 l.lwz r11,PT_GPR11(r1)
85#define TRACE_IRQS_OFF_ENTRY \
86 l.lwz r5,PT_SR(r1) ;\
87 l.andi r3,r5,(SPR_SR_IEE|SPR_SR_TEE) ;\
88 l.sfeq r5,r0 /* skip trace if irqs were already off */;\
89 l.bf 1f ;\
90 l.nop ;\
91 TRACE_IRQS_SAVE(r4,trace_hardirqs_off) ;\
921:
93#else
94#define TRACE_IRQS_OFF
95#define TRACE_IRQS_ON
96#define TRACE_IRQS_OFF_ENTRY
97#define TRACE_IRQS_ON_SYSCALL
98#endif
99
100/*
101 * We need to disable interrupts at beginning of RESTORE_ALL
102 * since interrupt might come in after we've loaded EPC return address
103 * and overwrite EPC with address somewhere in RESTORE_ALL
104 * which is of course wrong!
105 */
106
107#define RESTORE_ALL \
108 DISABLE_INTERRUPTS(r3,r4) ;\
109 l.lwz r3,PT_PC(r1) ;\
110 l.mtspr r0,r3,SPR_EPCR_BASE ;\
111 l.lwz r3,PT_SR(r1) ;\
112 l.mtspr r0,r3,SPR_ESR_BASE ;\
113 l.lwz r2,PT_GPR2(r1) ;\
114 l.lwz r3,PT_GPR3(r1) ;\
115 l.lwz r4,PT_GPR4(r1) ;\
116 l.lwz r5,PT_GPR5(r1) ;\
117 l.lwz r6,PT_GPR6(r1) ;\
118 l.lwz r7,PT_GPR7(r1) ;\
119 l.lwz r8,PT_GPR8(r1) ;\
120 l.lwz r9,PT_GPR9(r1) ;\
121 l.lwz r10,PT_GPR10(r1) ;\
122 l.lwz r11,PT_GPR11(r1) ;\
123 l.lwz r12,PT_GPR12(r1) ;\
124 l.lwz r13,PT_GPR13(r1) ;\
125 l.lwz r14,PT_GPR14(r1) ;\
126 l.lwz r15,PT_GPR15(r1) ;\
127 l.lwz r16,PT_GPR16(r1) ;\
128 l.lwz r17,PT_GPR17(r1) ;\
129 l.lwz r18,PT_GPR18(r1) ;\
130 l.lwz r19,PT_GPR19(r1) ;\
131 l.lwz r20,PT_GPR20(r1) ;\
132 l.lwz r21,PT_GPR21(r1) ;\
133 l.lwz r22,PT_GPR22(r1) ;\
134 l.lwz r23,PT_GPR23(r1) ;\
135 l.lwz r24,PT_GPR24(r1) ;\
136 l.lwz r25,PT_GPR25(r1) ;\
137 l.lwz r26,PT_GPR26(r1) ;\
138 l.lwz r27,PT_GPR27(r1) ;\
139 l.lwz r28,PT_GPR28(r1) ;\
140 l.lwz r29,PT_GPR29(r1) ;\
141 l.lwz r30,PT_GPR30(r1) ;\
142 l.lwz r31,PT_GPR31(r1) ;\
143 l.lwz r1,PT_SP(r1) ;\
144 l.rfe
145
146
147#define EXCEPTION_ENTRY(handler) \
148 .global handler ;\
149handler: ;\
150 /* r1, EPCR, ESR a already saved */ ;\
151 l.sw PT_GPR2(r1),r2 ;\
152 l.sw PT_GPR3(r1),r3 ;\
153 /* r4 already save */ ;\
154 l.sw PT_GPR5(r1),r5 ;\
155 l.sw PT_GPR6(r1),r6 ;\
156 l.sw PT_GPR7(r1),r7 ;\
157 l.sw PT_GPR8(r1),r8 ;\
158 l.sw PT_GPR9(r1),r9 ;\
159 /* r10 already saved */ ;\
160 l.sw PT_GPR11(r1),r11 ;\
161 /* r12 already saved */ ;\
162 l.sw PT_GPR13(r1),r13 ;\
163 l.sw PT_GPR14(r1),r14 ;\
164 l.sw PT_GPR15(r1),r15 ;\
165 l.sw PT_GPR16(r1),r16 ;\
166 l.sw PT_GPR17(r1),r17 ;\
167 l.sw PT_GPR18(r1),r18 ;\
168 l.sw PT_GPR19(r1),r19 ;\
169 l.sw PT_GPR20(r1),r20 ;\
170 l.sw PT_GPR21(r1),r21 ;\
171 l.sw PT_GPR22(r1),r22 ;\
172 l.sw PT_GPR23(r1),r23 ;\
173 l.sw PT_GPR24(r1),r24 ;\
174 l.sw PT_GPR25(r1),r25 ;\
175 l.sw PT_GPR26(r1),r26 ;\
176 l.sw PT_GPR27(r1),r27 ;\
177 l.sw PT_GPR28(r1),r28 ;\
178 l.sw PT_GPR29(r1),r29 ;\
179 /* r30 already save */ ;\
180/* l.sw PT_GPR30(r1),r30*/ ;\
181 l.sw PT_GPR31(r1),r31 ;\
182 TRACE_IRQS_OFF_ENTRY ;\
183 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
184 l.addi r30,r0,-1 ;\
185 l.sw PT_ORIG_GPR11(r1),r30
186
187#define UNHANDLED_EXCEPTION(handler,vector) \
188 .global handler ;\
189handler: ;\
190 /* r1, EPCR, ESR already saved */ ;\
191 l.sw PT_GPR2(r1),r2 ;\
192 l.sw PT_GPR3(r1),r3 ;\
193 l.sw PT_GPR5(r1),r5 ;\
194 l.sw PT_GPR6(r1),r6 ;\
195 l.sw PT_GPR7(r1),r7 ;\
196 l.sw PT_GPR8(r1),r8 ;\
197 l.sw PT_GPR9(r1),r9 ;\
198 /* r10 already saved */ ;\
199 l.sw PT_GPR11(r1),r11 ;\
200 /* r12 already saved */ ;\
201 l.sw PT_GPR13(r1),r13 ;\
202 l.sw PT_GPR14(r1),r14 ;\
203 l.sw PT_GPR15(r1),r15 ;\
204 l.sw PT_GPR16(r1),r16 ;\
205 l.sw PT_GPR17(r1),r17 ;\
206 l.sw PT_GPR18(r1),r18 ;\
207 l.sw PT_GPR19(r1),r19 ;\
208 l.sw PT_GPR20(r1),r20 ;\
209 l.sw PT_GPR21(r1),r21 ;\
210 l.sw PT_GPR22(r1),r22 ;\
211 l.sw PT_GPR23(r1),r23 ;\
212 l.sw PT_GPR24(r1),r24 ;\
213 l.sw PT_GPR25(r1),r25 ;\
214 l.sw PT_GPR26(r1),r26 ;\
215 l.sw PT_GPR27(r1),r27 ;\
216 l.sw PT_GPR28(r1),r28 ;\
217 l.sw PT_GPR29(r1),r29 ;\
218 /* r31 already saved */ ;\
219 l.sw PT_GPR30(r1),r30 ;\
220/* l.sw PT_GPR31(r1),r31 */ ;\
221 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
222 l.addi r30,r0,-1 ;\
223 l.sw PT_ORIG_GPR11(r1),r30 ;\
224 l.addi r3,r1,0 ;\
225 /* r4 is exception EA */ ;\
226 l.addi r5,r0,vector ;\
227 l.jal unhandled_exception ;\
228 l.nop ;\
229 l.j _ret_from_exception ;\
230 l.nop
231
232/* clobbers 'reg' */
233#define CLEAR_LWA_FLAG(reg) \
234 l.movhi reg,hi(lwa_flag) ;\
235 l.ori reg,reg,lo(lwa_flag) ;\
236 l.sw 0(reg),r0
237/*
238 * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR
239 * contain the same values as when exception we're handling
240 * occured. in fact they never do. if you need them use
241 * values saved on stack (for SPR_EPC, SPR_ESR) or content
242 * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE()
243 * in 'arch/or32/kernel/head.S'
244 */
245
246/* =====================================================[ exceptions] === */
247
248/* ---[ 0x100: RESET exception ]----------------------------------------- */
249
250EXCEPTION_ENTRY(_tng_kernel_start)
251 l.jal _start
252 l.andi r0,r0,0
253
254/* ---[ 0x200: BUS exception ]------------------------------------------- */
255
256EXCEPTION_ENTRY(_bus_fault_handler)
257 CLEAR_LWA_FLAG(r3)
258 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
259 l.jal do_bus_fault
260 l.addi r3,r1,0 /* pt_regs */
261
262 l.j _ret_from_exception
263 l.nop
264
265/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
266EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler)
267 CLEAR_LWA_FLAG(r3)
268 l.and r5,r5,r0
269 l.j 1f
270 l.nop
271
272EXCEPTION_ENTRY(_data_page_fault_handler)
273 CLEAR_LWA_FLAG(r3)
274 /* set up parameters for do_page_fault */
275 l.ori r5,r0,0x300 // exception vector
2761:
277 l.addi r3,r1,0 // pt_regs
278 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
279
280 /*
281 * __PHX__: TODO
282 *
283 * all this can be written much simpler. look at
284 * DTLB miss handler in the CONFIG_GUARD_PROTECTED_CORE part
285 */
286#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
287 l.lwz r6,PT_PC(r3) // address of an offending insn
288 l.lwz r6,0(r6) // instruction that caused pf
289
290 l.srli r6,r6,26 // check opcode for jump insn
291 l.sfeqi r6,0 // l.j
292 l.bf 8f
293 l.sfeqi r6,1 // l.jal
294 l.bf 8f
295 l.sfeqi r6,3 // l.bnf
296 l.bf 8f
297 l.sfeqi r6,4 // l.bf
298 l.bf 8f
299 l.sfeqi r6,0x11 // l.jr
300 l.bf 8f
301 l.sfeqi r6,0x12 // l.jalr
302 l.bf 8f
303 l.nop
304
305 l.j 9f
306 l.nop
307
3088: // offending insn is in delay slot
309 l.lwz r6,PT_PC(r3) // address of an offending insn
310 l.addi r6,r6,4
311 l.lwz r6,0(r6) // instruction that caused pf
312 l.srli r6,r6,26 // get opcode
3139: // offending instruction opcode loaded in r6
314
315#else
316
317 l.lwz r6,PT_SR(r3) // SR
318 l.andi r6,r6,SPR_SR_DSX // check for delay slot exception
319 l.sfne r6,r0 // exception happened in delay slot
320 l.bnf 7f
321 l.lwz r6,PT_PC(r3) // address of an offending insn
322
323 l.addi r6,r6,4 // offending insn is in delay slot
3247:
325 l.lwz r6,0(r6) // instruction that caused pf
326 l.srli r6,r6,26 // check opcode for write access
327#endif
328
329 l.sfgeui r6,0x33 // check opcode for write access
330 l.bnf 1f
331 l.sfleui r6,0x37
332 l.bnf 1f
333 l.ori r6,r0,0x1 // write access
334 l.j 2f
335 l.nop
3361: l.ori r6,r0,0x0 // !write access
3372:
338
339 /* call fault.c handler in or32/mm/fault.c */
340 l.jal do_page_fault
341 l.nop
342 l.j _ret_from_exception
343 l.nop
344
345/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
346EXCEPTION_ENTRY(_itlb_miss_page_fault_handler)
347 CLEAR_LWA_FLAG(r3)
348 l.and r5,r5,r0
349 l.j 1f
350 l.nop
351
352EXCEPTION_ENTRY(_insn_page_fault_handler)
353 CLEAR_LWA_FLAG(r3)
354 /* set up parameters for do_page_fault */
355 l.ori r5,r0,0x400 // exception vector
3561:
357 l.addi r3,r1,0 // pt_regs
358 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
359 l.ori r6,r0,0x0 // !write access
360
361 /* call fault.c handler in or32/mm/fault.c */
362 l.jal do_page_fault
363 l.nop
364 l.j _ret_from_exception
365 l.nop
366
367
368/* ---[ 0x500: Timer exception ]----------------------------------------- */
369
370EXCEPTION_ENTRY(_timer_handler)
371 CLEAR_LWA_FLAG(r3)
372 l.jal timer_interrupt
373 l.addi r3,r1,0 /* pt_regs */
374
375 l.j _ret_from_intr
376 l.nop
377
378/* ---[ 0x600: Alignment exception ]-------------------------------------- */
379
380EXCEPTION_ENTRY(_alignment_handler)
381 CLEAR_LWA_FLAG(r3)
382 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
383 l.jal do_unaligned_access
384 l.addi r3,r1,0 /* pt_regs */
385
386 l.j _ret_from_exception
387 l.nop
388
389#if 0
390EXCEPTION_ENTRY(_alignment_handler)
391// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the effective address */
392 l.addi r2,r4,0
393// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */
394 l.lwz r5,PT_PC(r1)
395
396 l.lwz r3,0(r5) /* Load insn */
397 l.srli r4,r3,26 /* Shift left to get the insn opcode */
398
399 l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */
400 l.bf jmp
401 l.sfeqi r4,0x01
402 l.bf jmp
403 l.sfeqi r4,0x03
404 l.bf jmp
405 l.sfeqi r4,0x04
406 l.bf jmp
407 l.sfeqi r4,0x11
408 l.bf jr
409 l.sfeqi r4,0x12
410 l.bf jr
411 l.nop
412 l.j 1f
413 l.addi r5,r5,4 /* Increment PC to get return insn address */
414
415jmp:
416 l.slli r4,r3,6 /* Get the signed extended jump length */
417 l.srai r4,r4,4
418
419 l.lwz r3,4(r5) /* Load the real load/store insn */
420
421 l.add r5,r5,r4 /* Calculate jump target address */
422
423 l.j 1f
424 l.srli r4,r3,26 /* Shift left to get the insn opcode */
425
426jr:
427 l.slli r4,r3,9 /* Shift to get the reg nb */
428 l.andi r4,r4,0x7c
429
430 l.lwz r3,4(r5) /* Load the real load/store insn */
431
432 l.add r4,r4,r1 /* Load the jump register value from the stack */
433 l.lwz r5,0(r4)
434
435 l.srli r4,r3,26 /* Shift left to get the insn opcode */
436
437
4381:
439// l.mtspr r0,r5,SPR_EPCR_BASE
440 l.sw PT_PC(r1),r5
441
442 l.sfeqi r4,0x26
443 l.bf lhs
444 l.sfeqi r4,0x25
445 l.bf lhz
446 l.sfeqi r4,0x22
447 l.bf lws
448 l.sfeqi r4,0x21
449 l.bf lwz
450 l.sfeqi r4,0x37
451 l.bf sh
452 l.sfeqi r4,0x35
453 l.bf sw
454 l.nop
455
4561: l.j 1b /* I don't know what to do */
457 l.nop
458
459lhs: l.lbs r5,0(r2)
460 l.slli r5,r5,8
461 l.lbz r6,1(r2)
462 l.or r5,r5,r6
463 l.srli r4,r3,19
464 l.andi r4,r4,0x7c
465 l.add r4,r4,r1
466 l.j align_end
467 l.sw 0(r4),r5
468
469lhz: l.lbz r5,0(r2)
470 l.slli r5,r5,8
471 l.lbz r6,1(r2)
472 l.or r5,r5,r6
473 l.srli r4,r3,19
474 l.andi r4,r4,0x7c
475 l.add r4,r4,r1
476 l.j align_end
477 l.sw 0(r4),r5
478
479lws: l.lbs r5,0(r2)
480 l.slli r5,r5,24
481 l.lbz r6,1(r2)
482 l.slli r6,r6,16
483 l.or r5,r5,r6
484 l.lbz r6,2(r2)
485 l.slli r6,r6,8
486 l.or r5,r5,r6
487 l.lbz r6,3(r2)
488 l.or r5,r5,r6
489 l.srli r4,r3,19
490 l.andi r4,r4,0x7c
491 l.add r4,r4,r1
492 l.j align_end
493 l.sw 0(r4),r5
494
495lwz: l.lbz r5,0(r2)
496 l.slli r5,r5,24
497 l.lbz r6,1(r2)
498 l.slli r6,r6,16
499 l.or r5,r5,r6
500 l.lbz r6,2(r2)
501 l.slli r6,r6,8
502 l.or r5,r5,r6
503 l.lbz r6,3(r2)
504 l.or r5,r5,r6
505 l.srli r4,r3,19
506 l.andi r4,r4,0x7c
507 l.add r4,r4,r1
508 l.j align_end
509 l.sw 0(r4),r5
510
511sh:
512 l.srli r4,r3,9
513 l.andi r4,r4,0x7c
514 l.add r4,r4,r1
515 l.lwz r5,0(r4)
516 l.sb 1(r2),r5
517 l.srli r5,r5,8
518 l.j align_end
519 l.sb 0(r2),r5
520
521sw:
522 l.srli r4,r3,9
523 l.andi r4,r4,0x7c
524 l.add r4,r4,r1
525 l.lwz r5,0(r4)
526 l.sb 3(r2),r5
527 l.srli r5,r5,8
528 l.sb 2(r2),r5
529 l.srli r5,r5,8
530 l.sb 1(r2),r5
531 l.srli r5,r5,8
532 l.j align_end
533 l.sb 0(r2),r5
534
535align_end:
536 l.j _ret_from_intr
537 l.nop
538#endif
539
540/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
541
542EXCEPTION_ENTRY(_illegal_instruction_handler)
543 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
544 l.jal do_illegal_instruction
545 l.addi r3,r1,0 /* pt_regs */
546
547 l.j _ret_from_exception
548 l.nop
549
550/* ---[ 0x800: External interrupt exception ]---------------------------- */
551
552EXCEPTION_ENTRY(_external_irq_handler)
553#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK
554 l.lwz r4,PT_SR(r1) // were interrupts enabled ?
555 l.andi r4,r4,SPR_SR_IEE
556 l.sfeqi r4,0
557 l.bnf 1f // ext irq enabled, all ok.
558 l.nop
559
560 l.addi r1,r1,-0x8
561 l.movhi r3,hi(42f)
562 l.ori r3,r3,lo(42f)
563 l.sw 0x0(r1),r3
564 l.jal printk
565 l.sw 0x4(r1),r4
566 l.addi r1,r1,0x8
567
568 .section .rodata, "a"
56942:
570 .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
571 .align 4
572 .previous
573
574 l.ori r4,r4,SPR_SR_IEE // fix the bug
575// l.sw PT_SR(r1),r4
5761:
577#endif
578 CLEAR_LWA_FLAG(r3)
579 l.addi r3,r1,0
580 l.movhi r8,hi(do_IRQ)
581 l.ori r8,r8,lo(do_IRQ)
582 l.jalr r8
583 l.nop
584 l.j _ret_from_intr
585 l.nop
586
587/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
588
589
590/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
591
592
593/* ---[ 0xb00: Range exception ]----------------------------------------- */
594
595UNHANDLED_EXCEPTION(_vector_0xb00,0xb00)
596
597/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
598
599/*
600 * Syscalls are a special type of exception in that they are
601 * _explicitly_ invoked by userspace and can therefore be
602 * held to conform to the same ABI as normal functions with
603 * respect to whether registers are preserved across the call
604 * or not.
605 */
606
607/* Upon syscall entry we just save the callee-saved registers
608 * and not the call-clobbered ones.
609 */
610
611_string_syscall_return:
612 .string "syscall return %ld \n\r\0"
613 .align 4
614
615ENTRY(_sys_call_handler)
616 /* r1, EPCR, ESR a already saved */
617 l.sw PT_GPR2(r1),r2
618 /* r3-r8 must be saved because syscall restart relies
619 * on us being able to restart the syscall args... technically
620 * they should be clobbered, otherwise
621 */
622 l.sw PT_GPR3(r1),r3
623 /*
624 * r4 already saved
625 * r4 holds the EEAR address of the fault, use it as screatch reg and
626 * then load the original r4
627 */
628 CLEAR_LWA_FLAG(r4)
629 l.lwz r4,PT_GPR4(r1)
630 l.sw PT_GPR5(r1),r5
631 l.sw PT_GPR6(r1),r6
632 l.sw PT_GPR7(r1),r7
633 l.sw PT_GPR8(r1),r8
634 l.sw PT_GPR9(r1),r9
635 /* r10 already saved */
636 l.sw PT_GPR11(r1),r11
637 /* orig_gpr11 must be set for syscalls */
638 l.sw PT_ORIG_GPR11(r1),r11
639 /* r12,r13 already saved */
640
641 /* r14-r28 (even) aren't touched by the syscall fast path below
642 * so we don't need to save them. However, the functions that return
643 * to userspace via a call to switch() DO need to save these because
644 * switch() effectively clobbers them... saving these registers for
645 * such functions is handled in their syscall wrappers (see fork, vfork,
646 * and clone, below).
647
648 /* r30 is the only register we clobber in the fast path */
649 /* r30 already saved */
650/* l.sw PT_GPR30(r1),r30 */
651
652_syscall_check_trace_enter:
653 /* syscalls run with interrupts enabled */
654 TRACE_IRQS_ON_SYSCALL
655 ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp
656
657 /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */
658 l.lwz r30,TI_FLAGS(r10)
659 l.andi r30,r30,_TIF_SYSCALL_TRACE
660 l.sfne r30,r0
661 l.bf _syscall_trace_enter
662 l.nop
663
664_syscall_check:
665 /* Ensure that the syscall number is reasonable */
666 l.sfgeui r11,__NR_syscalls
667 l.bf _syscall_badsys
668 l.nop
669
670_syscall_call:
671 l.movhi r29,hi(sys_call_table)
672 l.ori r29,r29,lo(sys_call_table)
673 l.slli r11,r11,2
674 l.add r29,r29,r11
675 l.lwz r29,0(r29)
676
677 l.jalr r29
678 l.nop
679
680_syscall_return:
681 /* All syscalls return here... just pay attention to ret_from_fork
682 * which does it in a round-about way.
683 */
684 l.sw PT_GPR11(r1),r11 // save return value
685
686#if 0
687_syscall_debug:
688 l.movhi r3,hi(_string_syscall_return)
689 l.ori r3,r3,lo(_string_syscall_return)
690 l.ori r27,r0,1
691 l.sw -4(r1),r27
692 l.sw -8(r1),r11
693 l.addi r1,r1,-8
694 l.movhi r27,hi(printk)
695 l.ori r27,r27,lo(printk)
696 l.jalr r27
697 l.nop
698 l.addi r1,r1,8
699#endif
700
701_syscall_check_trace_leave:
702 /* r30 is a callee-saved register so this should still hold the
703 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above...
704 * _syscall_trace_leave expects syscall result to be in pt_regs->r11.
705 */
706 l.sfne r30,r0
707 l.bf _syscall_trace_leave
708 l.nop
709
710/* This is where the exception-return code begins... interrupts need to be
711 * disabled the rest of the way here because we can't afford to miss any
712 * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */
713
714_syscall_check_work:
715 /* Here we need to disable interrupts */
716 DISABLE_INTERRUPTS(r27,r29)
717 TRACE_IRQS_OFF
718 l.lwz r30,TI_FLAGS(r10)
719 l.andi r30,r30,_TIF_WORK_MASK
720 l.sfne r30,r0
721
722 l.bnf _syscall_resume_userspace
723 l.nop
724
725 /* Work pending follows a different return path, so we need to
726 * make sure that all the call-saved registers get into pt_regs
727 * before branching...
728 */
729 l.sw PT_GPR14(r1),r14
730 l.sw PT_GPR16(r1),r16
731 l.sw PT_GPR18(r1),r18
732 l.sw PT_GPR20(r1),r20
733 l.sw PT_GPR22(r1),r22
734 l.sw PT_GPR24(r1),r24
735 l.sw PT_GPR26(r1),r26
736 l.sw PT_GPR28(r1),r28
737
738 /* _work_pending needs to be called with interrupts disabled */
739 l.j _work_pending
740 l.nop
741
742_syscall_resume_userspace:
743// ENABLE_INTERRUPTS(r29)
744
745
746/* This is the hot path for returning to userspace from a syscall. If there's
747 * work to be done and the branch to _work_pending was taken above, then the
748 * return to userspace will be done via the normal exception return path...
749 * that path restores _all_ registers and will overwrite the "clobbered"
750 * registers with whatever garbage is in pt_regs -- that's OK because those
751 * registers are clobbered anyway and because the extra work is insignificant
752 * in the context of the extra work that _work_pending is doing.
753
754/* Once again, syscalls are special and only guarantee to preserve the
755 * same registers as a normal function call */
756
757/* The assumption here is that the registers r14-r28 (even) are untouched and
758 * don't need to be restored... be sure that that's really the case!
759 */
760
761/* This is still too much... we should only be restoring what we actually
762 * clobbered... we should even be using 'scratch' (odd) regs above so that
763 * we don't need to restore anything, hardly...
764 */
765
766 l.lwz r2,PT_GPR2(r1)
767
768 /* Restore args */
769 /* r3-r8 are technically clobbered, but syscall restart needs these
770 * to be restored...
771 */
772 l.lwz r3,PT_GPR3(r1)
773 l.lwz r4,PT_GPR4(r1)
774 l.lwz r5,PT_GPR5(r1)
775 l.lwz r6,PT_GPR6(r1)
776 l.lwz r7,PT_GPR7(r1)
777 l.lwz r8,PT_GPR8(r1)
778
779 l.lwz r9,PT_GPR9(r1)
780 l.lwz r10,PT_GPR10(r1)
781 l.lwz r11,PT_GPR11(r1)
782
783 /* r30 is the only register we clobber in the fast path */
784 l.lwz r30,PT_GPR30(r1)
785
786 /* Here we use r13-r19 (odd) as scratch regs */
787 l.lwz r13,PT_PC(r1)
788 l.lwz r15,PT_SR(r1)
789 l.lwz r1,PT_SP(r1)
790 /* Interrupts need to be disabled for setting EPCR and ESR
791 * so that another interrupt doesn't come in here and clobber
792 * them before we can use them for our l.rfe */
793 DISABLE_INTERRUPTS(r17,r19)
794 l.mtspr r0,r13,SPR_EPCR_BASE
795 l.mtspr r0,r15,SPR_ESR_BASE
796 l.rfe
797
798/* End of hot path!
799 * Keep the below tracing and error handling out of the hot path...
800*/
801
802_syscall_trace_enter:
803 /* Here we pass pt_regs to do_syscall_trace_enter. Make sure
804 * that function is really getting all the info it needs as
805 * pt_regs isn't a complete set of userspace regs, just the
806 * ones relevant to the syscall...
807 *
808 * Note use of delay slot for setting argument.
809 */
810 l.jal do_syscall_trace_enter
811 l.addi r3,r1,0
812
813 /* Restore arguments (not preserved across do_syscall_trace_enter)
814 * so that we can do the syscall for real and return to the syscall
815 * hot path.
816 */
817 l.lwz r11,PT_GPR11(r1)
818 l.lwz r3,PT_GPR3(r1)
819 l.lwz r4,PT_GPR4(r1)
820 l.lwz r5,PT_GPR5(r1)
821 l.lwz r6,PT_GPR6(r1)
822 l.lwz r7,PT_GPR7(r1)
823
824 l.j _syscall_check
825 l.lwz r8,PT_GPR8(r1)
826
827_syscall_trace_leave:
828 l.jal do_syscall_trace_leave
829 l.addi r3,r1,0
830
831 l.j _syscall_check_work
832 l.nop
833
834_syscall_badsys:
835 /* Here we effectively pretend to have executed an imaginary
836 * syscall that returns -ENOSYS and then return to the regular
837 * syscall hot path.
838 * Note that "return value" is set in the delay slot...
839 */
840 l.j _syscall_return
841 l.addi r11,r0,-ENOSYS
842
843/******* END SYSCALL HANDLING *******/
844
845/* ---[ 0xd00: Trap exception ]------------------------------------------ */
846
847UNHANDLED_EXCEPTION(_vector_0xd00,0xd00)
848
849/* ---[ 0xe00: Trap exception ]------------------------------------------ */
850
851EXCEPTION_ENTRY(_trap_handler)
852 CLEAR_LWA_FLAG(r3)
853 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
854 l.jal do_trap
855 l.addi r3,r1,0 /* pt_regs */
856
857 l.j _ret_from_exception
858 l.nop
859
860/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
861
862UNHANDLED_EXCEPTION(_vector_0xf00,0xf00)
863
864/* ---[ 0x1000: Reserved exception ]------------------------------------- */
865
866UNHANDLED_EXCEPTION(_vector_0x1000,0x1000)
867
868/* ---[ 0x1100: Reserved exception ]------------------------------------- */
869
870UNHANDLED_EXCEPTION(_vector_0x1100,0x1100)
871
872/* ---[ 0x1200: Reserved exception ]------------------------------------- */
873
874UNHANDLED_EXCEPTION(_vector_0x1200,0x1200)
875
876/* ---[ 0x1300: Reserved exception ]------------------------------------- */
877
878UNHANDLED_EXCEPTION(_vector_0x1300,0x1300)
879
880/* ---[ 0x1400: Reserved exception ]------------------------------------- */
881
882UNHANDLED_EXCEPTION(_vector_0x1400,0x1400)
883
884/* ---[ 0x1500: Reserved exception ]------------------------------------- */
885
886UNHANDLED_EXCEPTION(_vector_0x1500,0x1500)
887
888/* ---[ 0x1600: Reserved exception ]------------------------------------- */
889
890UNHANDLED_EXCEPTION(_vector_0x1600,0x1600)
891
892/* ---[ 0x1700: Reserved exception ]------------------------------------- */
893
894UNHANDLED_EXCEPTION(_vector_0x1700,0x1700)
895
896/* ---[ 0x1800: Reserved exception ]------------------------------------- */
897
898UNHANDLED_EXCEPTION(_vector_0x1800,0x1800)
899
900/* ---[ 0x1900: Reserved exception ]------------------------------------- */
901
902UNHANDLED_EXCEPTION(_vector_0x1900,0x1900)
903
904/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
905
906UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00)
907
908/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
909
910UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00)
911
912/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
913
914UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00)
915
916/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
917
918UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00)
919
920/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
921
922UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00)
923
924/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
925
926UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00)
927
928/* ========================================================[ return ] === */
929
930_resume_userspace:
931 DISABLE_INTERRUPTS(r3,r4)
932 TRACE_IRQS_OFF
933 l.lwz r4,TI_FLAGS(r10)
934 l.andi r13,r4,_TIF_WORK_MASK
935 l.sfeqi r13,0
936 l.bf _restore_all
937 l.nop
938
939_work_pending:
940 l.lwz r5,PT_ORIG_GPR11(r1)
941 l.sfltsi r5,0
942 l.bnf 1f
943 l.nop
944 l.andi r5,r5,0
9451:
946 l.jal do_work_pending
947 l.ori r3,r1,0 /* pt_regs */
948
949 l.sfeqi r11,0
950 l.bf _restore_all
951 l.nop
952 l.sfltsi r11,0
953 l.bnf 1f
954 l.nop
955 l.and r11,r11,r0
956 l.ori r11,r11,__NR_restart_syscall
957 l.j _syscall_check_trace_enter
958 l.nop
9591:
960 l.lwz r11,PT_ORIG_GPR11(r1)
961 /* Restore arg registers */
962 l.lwz r3,PT_GPR3(r1)
963 l.lwz r4,PT_GPR4(r1)
964 l.lwz r5,PT_GPR5(r1)
965 l.lwz r6,PT_GPR6(r1)
966 l.lwz r7,PT_GPR7(r1)
967 l.j _syscall_check_trace_enter
968 l.lwz r8,PT_GPR8(r1)
969
970_restore_all:
971#ifdef CONFIG_TRACE_IRQFLAGS
972 l.lwz r4,PT_SR(r1)
973 l.andi r3,r4,(SPR_SR_IEE|SPR_SR_TEE)
974 l.sfeq r3,r0 /* skip trace if irqs were off */
975 l.bf skip_hardirqs_on
976 l.nop
977 TRACE_IRQS_ON
978skip_hardirqs_on:
979#endif
980 RESTORE_ALL
981 /* This returns to userspace code */
982
983
984ENTRY(_ret_from_intr)
985ENTRY(_ret_from_exception)
986 l.lwz r4,PT_SR(r1)
987 l.andi r3,r4,SPR_SR_SM
988 l.sfeqi r3,0
989 l.bnf _restore_all
990 l.nop
991 l.j _resume_userspace
992 l.nop
993
994ENTRY(ret_from_fork)
995 l.jal schedule_tail
996 l.nop
997
998 /* Check if we are a kernel thread */
999 l.sfeqi r20,0
1000 l.bf 1f
1001 l.nop
1002
1003 /* ...we are a kernel thread so invoke the requested callback */
1004 l.jalr r20
1005 l.or r3,r22,r0
1006
10071:
1008 /* _syscall_returns expect r11 to contain return value */
1009 l.lwz r11,PT_GPR11(r1)
1010
1011 /* The syscall fast path return expects call-saved registers
1012 * r12-r28 to be untouched, so we restore them here as they
1013 * will have been effectively clobbered when arriving here
1014 * via the call to switch()
1015 */
1016 l.lwz r12,PT_GPR12(r1)
1017 l.lwz r14,PT_GPR14(r1)
1018 l.lwz r16,PT_GPR16(r1)
1019 l.lwz r18,PT_GPR18(r1)
1020 l.lwz r20,PT_GPR20(r1)
1021 l.lwz r22,PT_GPR22(r1)
1022 l.lwz r24,PT_GPR24(r1)
1023 l.lwz r26,PT_GPR26(r1)
1024 l.lwz r28,PT_GPR28(r1)
1025
1026 l.j _syscall_return
1027 l.nop
1028
1029/* ========================================================[ switch ] === */
1030
1031/*
1032 * This routine switches between two different tasks. The process
1033 * state of one is saved on its kernel stack. Then the state
1034 * of the other is restored from its kernel stack. The memory
1035 * management hardware is updated to the second process's state.
1036 * Finally, we can return to the second process, via the 'return'.
1037 *
1038 * Note: there are two ways to get to the "going out" portion
1039 * of this code; either by coming in via the entry (_switch)
1040 * or via "fork" which must set up an environment equivalent
1041 * to the "_switch" path. If you change this (or in particular, the
1042 * SAVE_REGS macro), you'll have to change the fork code also.
1043 */
1044
1045
1046/* _switch MUST never lay on page boundry, cause it runs from
1047 * effective addresses and beeing interrupted by iTLB miss would kill it.
1048 * dTLB miss seams to never accour in the bad place since data accesses
1049 * are from task structures which are always page aligned.
1050 *
1051 * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR
1052 * register, then load the previous register values and only at the end call
1053 * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets
1054 * garbled and we end up calling l.rfe with the wrong EPCR. (same probably
1055 * holds for ESR)
1056 *
1057 * To avoid this problems it is sufficient to align _switch to
1058 * some nice round number smaller than it's size...
1059 */
1060
1061/* ABI rules apply here... we either enter _switch via schedule() or via
1062 * an imaginary call to which we shall return at return_from_fork. Either
1063 * way, we are a function call and only need to preserve the callee-saved
1064 * registers when we return. As such, we don't need to save the registers
1065 * on the stack that we won't be returning as they were...
1066 */
1067
1068 .align 0x400
1069ENTRY(_switch)
1070 /* We don't store SR as _switch only gets called in a context where
1071 * the SR will be the same going in and coming out... */
1072
1073 /* Set up new pt_regs struct for saving task state */
1074 l.addi r1,r1,-(INT_FRAME_SIZE)
1075
1076 /* No need to store r1/PT_SP as it goes into KSP below */
1077 l.sw PT_GPR2(r1),r2
1078 l.sw PT_GPR9(r1),r9
1079 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
1080 * and expects r12 to be callee-saved... */
1081 l.sw PT_GPR12(r1),r12
1082 l.sw PT_GPR14(r1),r14
1083 l.sw PT_GPR16(r1),r16
1084 l.sw PT_GPR18(r1),r18
1085 l.sw PT_GPR20(r1),r20
1086 l.sw PT_GPR22(r1),r22
1087 l.sw PT_GPR24(r1),r24
1088 l.sw PT_GPR26(r1),r26
1089 l.sw PT_GPR28(r1),r28
1090 l.sw PT_GPR30(r1),r30
1091
1092 l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/
1093
1094 /* We use thread_info->ksp for storing the address of the above
1095 * structure so that we can get back to it later... we don't want
1096 * to lose the value of thread_info->ksp, though, so store it as
1097 * pt_regs->sp so that we can easily restore it when we are made
1098 * live again...
1099 */
1100
1101 /* Save the old value of thread_info->ksp as pt_regs->sp */
1102 l.lwz r29,TI_KSP(r10)
1103 l.sw PT_SP(r1),r29
1104
1105 /* Swap kernel stack pointers */
1106 l.sw TI_KSP(r10),r1 /* Save old stack pointer */
1107 l.or r10,r4,r0 /* Set up new current_thread_info */
1108 l.lwz r1,TI_KSP(r10) /* Load new stack pointer */
1109
1110 /* Restore the old value of thread_info->ksp */
1111 l.lwz r29,PT_SP(r1)
1112 l.sw TI_KSP(r10),r29
1113
1114 /* ...and restore the registers, except r11 because the return value
1115 * has already been set above.
1116 */
1117 l.lwz r2,PT_GPR2(r1)
1118 l.lwz r9,PT_GPR9(r1)
1119 /* No need to restore r10 */
1120 /* ...and do not restore r11 */
1121
1122 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
1123 * and expects r12 to be callee-saved... */
1124 l.lwz r12,PT_GPR12(r1)
1125 l.lwz r14,PT_GPR14(r1)
1126 l.lwz r16,PT_GPR16(r1)
1127 l.lwz r18,PT_GPR18(r1)
1128 l.lwz r20,PT_GPR20(r1)
1129 l.lwz r22,PT_GPR22(r1)
1130 l.lwz r24,PT_GPR24(r1)
1131 l.lwz r26,PT_GPR26(r1)
1132 l.lwz r28,PT_GPR28(r1)
1133 l.lwz r30,PT_GPR30(r1)
1134
1135 /* Unwind stack to pre-switch state */
1136 l.addi r1,r1,(INT_FRAME_SIZE)
1137
1138 /* Return via the link-register back to where we 'came from', where
1139 * that may be either schedule(), ret_from_fork(), or
1140 * ret_from_kernel_thread(). If we are returning to a new thread,
1141 * we are expected to have set up the arg to schedule_tail already,
1142 * hence we do so here unconditionally:
1143 */
1144 l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */
1145 l.jr r9
1146 l.nop
1147
1148/* ==================================================================== */
1149
1150/* These all use the delay slot for setting the argument register, so the
1151 * jump is always happening after the l.addi instruction.
1152 *
1153 * These are all just wrappers that don't touch the link-register r9, so the
1154 * return from the "real" syscall function will return back to the syscall
1155 * code that did the l.jal that brought us here.
1156 */
1157
1158/* fork requires that we save all the callee-saved registers because they
1159 * are all effectively clobbered by the call to _switch. Here we store
1160 * all the registers that aren't touched by the syscall fast path and thus
1161 * weren't saved there.
1162 */
1163
1164_fork_save_extra_regs_and_call:
1165 l.sw PT_GPR14(r1),r14
1166 l.sw PT_GPR16(r1),r16
1167 l.sw PT_GPR18(r1),r18
1168 l.sw PT_GPR20(r1),r20
1169 l.sw PT_GPR22(r1),r22
1170 l.sw PT_GPR24(r1),r24
1171 l.sw PT_GPR26(r1),r26
1172 l.jr r29
1173 l.sw PT_GPR28(r1),r28
1174
1175ENTRY(__sys_clone)
1176 l.movhi r29,hi(sys_clone)
1177 l.ori r29,r29,lo(sys_clone)
1178 l.j _fork_save_extra_regs_and_call
1179 l.addi r7,r1,0
1180
1181ENTRY(__sys_fork)
1182 l.movhi r29,hi(sys_fork)
1183 l.ori r29,r29,lo(sys_fork)
1184 l.j _fork_save_extra_regs_and_call
1185 l.addi r3,r1,0
1186
1187ENTRY(sys_rt_sigreturn)
1188 l.jal _sys_rt_sigreturn
1189 l.addi r3,r1,0
1190 l.sfne r30,r0
1191 l.bnf _no_syscall_trace
1192 l.nop
1193 l.jal do_syscall_trace_leave
1194 l.addi r3,r1,0
1195_no_syscall_trace:
1196 l.j _resume_userspace
1197 l.nop
1198
1199/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000.
1200 * The functions takes a variable number of parameters depending on which
1201 * particular flavour of atomic you want... parameter 1 is a flag identifying
1202 * the atomic in question. Currently, this function implements the
1203 * following variants:
1204 *
1205 * XCHG:
1206 * @flag: 1
1207 * @ptr1:
1208 * @ptr2:
1209 * Atomically exchange the values in pointers 1 and 2.
1210 *
1211 */
1212
1213ENTRY(sys_or1k_atomic)
1214 /* FIXME: This ignores r3 and always does an XCHG */
1215 DISABLE_INTERRUPTS(r17,r19)
1216 l.lwz r29,0(r4)
1217 l.lwz r27,0(r5)
1218 l.sw 0(r4),r27
1219 l.sw 0(r5),r29
1220 ENABLE_INTERRUPTS(r17)
1221 l.jr r9
1222 l.or r11,r0,r0
1223
1224/* ============================================================[ EOF ]=== */
1/* SPDX-License-Identifier: GPL-2.0-or-later */
2/*
3 * OpenRISC entry.S
4 *
5 * Linux architectural port borrowing liberally from similar works of
6 * others. All original copyrights apply as per the original source
7 * declaration.
8 *
9 * Modifications for the OpenRISC architecture:
10 * Copyright (C) 2003 Matjaz Breskvar <phoenix@bsemi.com>
11 * Copyright (C) 2005 Gyorgy Jeney <nog@bsemi.com>
12 * Copyright (C) 2010-2011 Jonas Bonn <jonas@southpole.se>
13 */
14
15#include <linux/linkage.h>
16#include <linux/pgtable.h>
17
18#include <asm/processor.h>
19#include <asm/unistd.h>
20#include <asm/thread_info.h>
21#include <asm/errno.h>
22#include <asm/spr_defs.h>
23#include <asm/page.h>
24#include <asm/mmu.h>
25#include <asm/asm-offsets.h>
26
27#define DISABLE_INTERRUPTS(t1,t2) \
28 l.mfspr t2,r0,SPR_SR ;\
29 l.movhi t1,hi(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
30 l.ori t1,t1,lo(~(SPR_SR_IEE|SPR_SR_TEE)) ;\
31 l.and t2,t2,t1 ;\
32 l.mtspr r0,t2,SPR_SR
33
34#define ENABLE_INTERRUPTS(t1) \
35 l.mfspr t1,r0,SPR_SR ;\
36 l.ori t1,t1,lo(SPR_SR_IEE|SPR_SR_TEE) ;\
37 l.mtspr r0,t1,SPR_SR
38
39/* =========================================================[ macros ]=== */
40
41#ifdef CONFIG_TRACE_IRQFLAGS
42/*
43 * Trace irq on/off creating a stack frame.
44 */
45#define TRACE_IRQS_OP(trace_op) \
46 l.sw -8(r1),r2 /* store frame pointer */ ;\
47 l.sw -4(r1),r9 /* store return address */ ;\
48 l.addi r2,r1,0 /* move sp to fp */ ;\
49 l.jal trace_op ;\
50 l.addi r1,r1,-8 ;\
51 l.ori r1,r2,0 /* restore sp */ ;\
52 l.lwz r9,-4(r1) /* restore return address */ ;\
53 l.lwz r2,-8(r1) /* restore fp */ ;\
54/*
55 * Trace irq on/off and save registers we need that would otherwise be
56 * clobbered.
57 */
58#define TRACE_IRQS_SAVE(t1,trace_op) \
59 l.sw -12(r1),t1 /* save extra reg */ ;\
60 l.sw -8(r1),r2 /* store frame pointer */ ;\
61 l.sw -4(r1),r9 /* store return address */ ;\
62 l.addi r2,r1,0 /* move sp to fp */ ;\
63 l.jal trace_op ;\
64 l.addi r1,r1,-12 ;\
65 l.ori r1,r2,0 /* restore sp */ ;\
66 l.lwz r9,-4(r1) /* restore return address */ ;\
67 l.lwz r2,-8(r1) /* restore fp */ ;\
68 l.lwz t1,-12(r1) /* restore extra reg */
69
70#define TRACE_IRQS_OFF TRACE_IRQS_OP(trace_hardirqs_off)
71#define TRACE_IRQS_ON TRACE_IRQS_OP(trace_hardirqs_on)
72#define TRACE_IRQS_ON_SYSCALL \
73 TRACE_IRQS_SAVE(r10,trace_hardirqs_on) ;\
74 l.lwz r3,PT_GPR3(r1) ;\
75 l.lwz r4,PT_GPR4(r1) ;\
76 l.lwz r5,PT_GPR5(r1) ;\
77 l.lwz r6,PT_GPR6(r1) ;\
78 l.lwz r7,PT_GPR7(r1) ;\
79 l.lwz r8,PT_GPR8(r1) ;\
80 l.lwz r11,PT_GPR11(r1)
81#define TRACE_IRQS_OFF_ENTRY \
82 l.lwz r5,PT_SR(r1) ;\
83 l.andi r3,r5,(SPR_SR_IEE|SPR_SR_TEE) ;\
84 l.sfeq r5,r0 /* skip trace if irqs were already off */;\
85 l.bf 1f ;\
86 l.nop ;\
87 TRACE_IRQS_SAVE(r4,trace_hardirqs_off) ;\
881:
89#else
90#define TRACE_IRQS_OFF
91#define TRACE_IRQS_ON
92#define TRACE_IRQS_OFF_ENTRY
93#define TRACE_IRQS_ON_SYSCALL
94#endif
95
96/*
97 * We need to disable interrupts at beginning of RESTORE_ALL
98 * since interrupt might come in after we've loaded EPC return address
99 * and overwrite EPC with address somewhere in RESTORE_ALL
100 * which is of course wrong!
101 */
102
103#define RESTORE_ALL \
104 DISABLE_INTERRUPTS(r3,r4) ;\
105 l.lwz r3,PT_PC(r1) ;\
106 l.mtspr r0,r3,SPR_EPCR_BASE ;\
107 l.lwz r3,PT_SR(r1) ;\
108 l.mtspr r0,r3,SPR_ESR_BASE ;\
109 l.lwz r2,PT_GPR2(r1) ;\
110 l.lwz r3,PT_GPR3(r1) ;\
111 l.lwz r4,PT_GPR4(r1) ;\
112 l.lwz r5,PT_GPR5(r1) ;\
113 l.lwz r6,PT_GPR6(r1) ;\
114 l.lwz r7,PT_GPR7(r1) ;\
115 l.lwz r8,PT_GPR8(r1) ;\
116 l.lwz r9,PT_GPR9(r1) ;\
117 l.lwz r10,PT_GPR10(r1) ;\
118 l.lwz r11,PT_GPR11(r1) ;\
119 l.lwz r12,PT_GPR12(r1) ;\
120 l.lwz r13,PT_GPR13(r1) ;\
121 l.lwz r14,PT_GPR14(r1) ;\
122 l.lwz r15,PT_GPR15(r1) ;\
123 l.lwz r16,PT_GPR16(r1) ;\
124 l.lwz r17,PT_GPR17(r1) ;\
125 l.lwz r18,PT_GPR18(r1) ;\
126 l.lwz r19,PT_GPR19(r1) ;\
127 l.lwz r20,PT_GPR20(r1) ;\
128 l.lwz r21,PT_GPR21(r1) ;\
129 l.lwz r22,PT_GPR22(r1) ;\
130 l.lwz r23,PT_GPR23(r1) ;\
131 l.lwz r24,PT_GPR24(r1) ;\
132 l.lwz r25,PT_GPR25(r1) ;\
133 l.lwz r26,PT_GPR26(r1) ;\
134 l.lwz r27,PT_GPR27(r1) ;\
135 l.lwz r28,PT_GPR28(r1) ;\
136 l.lwz r29,PT_GPR29(r1) ;\
137 l.lwz r30,PT_GPR30(r1) ;\
138 l.lwz r31,PT_GPR31(r1) ;\
139 l.lwz r1,PT_SP(r1) ;\
140 l.rfe
141
142
143#define EXCEPTION_ENTRY(handler) \
144 .global handler ;\
145handler: ;\
146 /* r1, EPCR, ESR a already saved */ ;\
147 l.sw PT_GPR2(r1),r2 ;\
148 l.sw PT_GPR3(r1),r3 ;\
149 /* r4 already save */ ;\
150 l.sw PT_GPR5(r1),r5 ;\
151 l.sw PT_GPR6(r1),r6 ;\
152 l.sw PT_GPR7(r1),r7 ;\
153 l.sw PT_GPR8(r1),r8 ;\
154 l.sw PT_GPR9(r1),r9 ;\
155 /* r10 already saved */ ;\
156 l.sw PT_GPR11(r1),r11 ;\
157 /* r12 already saved */ ;\
158 l.sw PT_GPR13(r1),r13 ;\
159 l.sw PT_GPR14(r1),r14 ;\
160 l.sw PT_GPR15(r1),r15 ;\
161 l.sw PT_GPR16(r1),r16 ;\
162 l.sw PT_GPR17(r1),r17 ;\
163 l.sw PT_GPR18(r1),r18 ;\
164 l.sw PT_GPR19(r1),r19 ;\
165 l.sw PT_GPR20(r1),r20 ;\
166 l.sw PT_GPR21(r1),r21 ;\
167 l.sw PT_GPR22(r1),r22 ;\
168 l.sw PT_GPR23(r1),r23 ;\
169 l.sw PT_GPR24(r1),r24 ;\
170 l.sw PT_GPR25(r1),r25 ;\
171 l.sw PT_GPR26(r1),r26 ;\
172 l.sw PT_GPR27(r1),r27 ;\
173 l.sw PT_GPR28(r1),r28 ;\
174 l.sw PT_GPR29(r1),r29 ;\
175 /* r30 already save */ ;\
176/* l.sw PT_GPR30(r1),r30*/ ;\
177 l.sw PT_GPR31(r1),r31 ;\
178 TRACE_IRQS_OFF_ENTRY ;\
179 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
180 l.addi r30,r0,-1 ;\
181 l.sw PT_ORIG_GPR11(r1),r30
182
183#define UNHANDLED_EXCEPTION(handler,vector) \
184 .global handler ;\
185handler: ;\
186 /* r1, EPCR, ESR already saved */ ;\
187 l.sw PT_GPR2(r1),r2 ;\
188 l.sw PT_GPR3(r1),r3 ;\
189 l.sw PT_GPR5(r1),r5 ;\
190 l.sw PT_GPR6(r1),r6 ;\
191 l.sw PT_GPR7(r1),r7 ;\
192 l.sw PT_GPR8(r1),r8 ;\
193 l.sw PT_GPR9(r1),r9 ;\
194 /* r10 already saved */ ;\
195 l.sw PT_GPR11(r1),r11 ;\
196 /* r12 already saved */ ;\
197 l.sw PT_GPR13(r1),r13 ;\
198 l.sw PT_GPR14(r1),r14 ;\
199 l.sw PT_GPR15(r1),r15 ;\
200 l.sw PT_GPR16(r1),r16 ;\
201 l.sw PT_GPR17(r1),r17 ;\
202 l.sw PT_GPR18(r1),r18 ;\
203 l.sw PT_GPR19(r1),r19 ;\
204 l.sw PT_GPR20(r1),r20 ;\
205 l.sw PT_GPR21(r1),r21 ;\
206 l.sw PT_GPR22(r1),r22 ;\
207 l.sw PT_GPR23(r1),r23 ;\
208 l.sw PT_GPR24(r1),r24 ;\
209 l.sw PT_GPR25(r1),r25 ;\
210 l.sw PT_GPR26(r1),r26 ;\
211 l.sw PT_GPR27(r1),r27 ;\
212 l.sw PT_GPR28(r1),r28 ;\
213 l.sw PT_GPR29(r1),r29 ;\
214 /* r31 already saved */ ;\
215 l.sw PT_GPR30(r1),r30 ;\
216/* l.sw PT_GPR31(r1),r31 */ ;\
217 /* Store -1 in orig_gpr11 for non-syscall exceptions */ ;\
218 l.addi r30,r0,-1 ;\
219 l.sw PT_ORIG_GPR11(r1),r30 ;\
220 l.addi r3,r1,0 ;\
221 /* r4 is exception EA */ ;\
222 l.addi r5,r0,vector ;\
223 l.jal unhandled_exception ;\
224 l.nop ;\
225 l.j _ret_from_exception ;\
226 l.nop
227
228/* clobbers 'reg' */
229#define CLEAR_LWA_FLAG(reg) \
230 l.movhi reg,hi(lwa_flag) ;\
231 l.ori reg,reg,lo(lwa_flag) ;\
232 l.sw 0(reg),r0
233/*
234 * NOTE: one should never assume that SPR_EPC, SPR_ESR, SPR_EEAR
235 * contain the same values as when exception we're handling
236 * occured. in fact they never do. if you need them use
237 * values saved on stack (for SPR_EPC, SPR_ESR) or content
238 * of r4 (for SPR_EEAR). for details look at EXCEPTION_HANDLE()
239 * in 'arch/openrisc/kernel/head.S'
240 */
241
242/* =====================================================[ exceptions] === */
243
244/* ---[ 0x100: RESET exception ]----------------------------------------- */
245
246EXCEPTION_ENTRY(_tng_kernel_start)
247 l.jal _start
248 l.andi r0,r0,0
249
250/* ---[ 0x200: BUS exception ]------------------------------------------- */
251
252EXCEPTION_ENTRY(_bus_fault_handler)
253 CLEAR_LWA_FLAG(r3)
254 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
255 l.jal do_bus_fault
256 l.addi r3,r1,0 /* pt_regs */
257
258 l.j _ret_from_exception
259 l.nop
260
261/* ---[ 0x300: Data Page Fault exception ]------------------------------- */
262EXCEPTION_ENTRY(_dtlb_miss_page_fault_handler)
263 CLEAR_LWA_FLAG(r3)
264 l.and r5,r5,r0
265 l.j 1f
266 l.nop
267
268EXCEPTION_ENTRY(_data_page_fault_handler)
269 CLEAR_LWA_FLAG(r3)
270 /* set up parameters for do_page_fault */
271 l.ori r5,r0,0x300 // exception vector
2721:
273 l.addi r3,r1,0 // pt_regs
274 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
275
276#ifdef CONFIG_OPENRISC_NO_SPR_SR_DSX
277 l.lwz r6,PT_PC(r3) // address of an offending insn
278 l.lwz r6,0(r6) // instruction that caused pf
279
280 l.srli r6,r6,26 // check opcode for jump insn
281 l.sfeqi r6,0 // l.j
282 l.bf 8f
283 l.sfeqi r6,1 // l.jal
284 l.bf 8f
285 l.sfeqi r6,3 // l.bnf
286 l.bf 8f
287 l.sfeqi r6,4 // l.bf
288 l.bf 8f
289 l.sfeqi r6,0x11 // l.jr
290 l.bf 8f
291 l.sfeqi r6,0x12 // l.jalr
292 l.bf 8f
293 l.nop
294
295 l.j 9f
296 l.nop
297
2988: // offending insn is in delay slot
299 l.lwz r6,PT_PC(r3) // address of an offending insn
300 l.addi r6,r6,4
301 l.lwz r6,0(r6) // instruction that caused pf
302 l.srli r6,r6,26 // get opcode
3039: // offending instruction opcode loaded in r6
304
305#else
306
307 l.mfspr r6,r0,SPR_SR // SR
308 l.andi r6,r6,SPR_SR_DSX // check for delay slot exception
309 l.sfne r6,r0 // exception happened in delay slot
310 l.bnf 7f
311 l.lwz r6,PT_PC(r3) // address of an offending insn
312
313 l.addi r6,r6,4 // offending insn is in delay slot
3147:
315 l.lwz r6,0(r6) // instruction that caused pf
316 l.srli r6,r6,26 // check opcode for write access
317#endif
318
319 l.sfgeui r6,0x33 // check opcode for write access
320 l.bnf 1f
321 l.sfleui r6,0x37
322 l.bnf 1f
323 l.ori r6,r0,0x1 // write access
324 l.j 2f
325 l.nop
3261: l.ori r6,r0,0x0 // !write access
3272:
328
329 /* call fault.c handler in or32/mm/fault.c */
330 l.jal do_page_fault
331 l.nop
332 l.j _ret_from_exception
333 l.nop
334
335/* ---[ 0x400: Insn Page Fault exception ]------------------------------- */
336EXCEPTION_ENTRY(_itlb_miss_page_fault_handler)
337 CLEAR_LWA_FLAG(r3)
338 l.and r5,r5,r0
339 l.j 1f
340 l.nop
341
342EXCEPTION_ENTRY(_insn_page_fault_handler)
343 CLEAR_LWA_FLAG(r3)
344 /* set up parameters for do_page_fault */
345 l.ori r5,r0,0x400 // exception vector
3461:
347 l.addi r3,r1,0 // pt_regs
348 /* r4 set be EXCEPTION_HANDLE */ // effective address of fault
349 l.ori r6,r0,0x0 // !write access
350
351 /* call fault.c handler in or32/mm/fault.c */
352 l.jal do_page_fault
353 l.nop
354 l.j _ret_from_exception
355 l.nop
356
357
358/* ---[ 0x500: Timer exception ]----------------------------------------- */
359
360EXCEPTION_ENTRY(_timer_handler)
361 CLEAR_LWA_FLAG(r3)
362 l.jal timer_interrupt
363 l.addi r3,r1,0 /* pt_regs */
364
365 l.j _ret_from_intr
366 l.nop
367
368/* ---[ 0x600: Alignment exception ]-------------------------------------- */
369
370EXCEPTION_ENTRY(_alignment_handler)
371 CLEAR_LWA_FLAG(r3)
372 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
373 l.jal do_unaligned_access
374 l.addi r3,r1,0 /* pt_regs */
375
376 l.j _ret_from_exception
377 l.nop
378
379#if 0
380EXCEPTION_ENTRY(_alignment_handler)
381// l.mfspr r2,r0,SPR_EEAR_BASE /* Load the effective address */
382 l.addi r2,r4,0
383// l.mfspr r5,r0,SPR_EPCR_BASE /* Load the insn address */
384 l.lwz r5,PT_PC(r1)
385
386 l.lwz r3,0(r5) /* Load insn */
387 l.srli r4,r3,26 /* Shift left to get the insn opcode */
388
389 l.sfeqi r4,0x00 /* Check if the load/store insn is in delay slot */
390 l.bf jmp
391 l.sfeqi r4,0x01
392 l.bf jmp
393 l.sfeqi r4,0x03
394 l.bf jmp
395 l.sfeqi r4,0x04
396 l.bf jmp
397 l.sfeqi r4,0x11
398 l.bf jr
399 l.sfeqi r4,0x12
400 l.bf jr
401 l.nop
402 l.j 1f
403 l.addi r5,r5,4 /* Increment PC to get return insn address */
404
405jmp:
406 l.slli r4,r3,6 /* Get the signed extended jump length */
407 l.srai r4,r4,4
408
409 l.lwz r3,4(r5) /* Load the real load/store insn */
410
411 l.add r5,r5,r4 /* Calculate jump target address */
412
413 l.j 1f
414 l.srli r4,r3,26 /* Shift left to get the insn opcode */
415
416jr:
417 l.slli r4,r3,9 /* Shift to get the reg nb */
418 l.andi r4,r4,0x7c
419
420 l.lwz r3,4(r5) /* Load the real load/store insn */
421
422 l.add r4,r4,r1 /* Load the jump register value from the stack */
423 l.lwz r5,0(r4)
424
425 l.srli r4,r3,26 /* Shift left to get the insn opcode */
426
427
4281:
429// l.mtspr r0,r5,SPR_EPCR_BASE
430 l.sw PT_PC(r1),r5
431
432 l.sfeqi r4,0x26
433 l.bf lhs
434 l.sfeqi r4,0x25
435 l.bf lhz
436 l.sfeqi r4,0x22
437 l.bf lws
438 l.sfeqi r4,0x21
439 l.bf lwz
440 l.sfeqi r4,0x37
441 l.bf sh
442 l.sfeqi r4,0x35
443 l.bf sw
444 l.nop
445
4461: l.j 1b /* I don't know what to do */
447 l.nop
448
449lhs: l.lbs r5,0(r2)
450 l.slli r5,r5,8
451 l.lbz r6,1(r2)
452 l.or r5,r5,r6
453 l.srli r4,r3,19
454 l.andi r4,r4,0x7c
455 l.add r4,r4,r1
456 l.j align_end
457 l.sw 0(r4),r5
458
459lhz: l.lbz r5,0(r2)
460 l.slli r5,r5,8
461 l.lbz r6,1(r2)
462 l.or r5,r5,r6
463 l.srli r4,r3,19
464 l.andi r4,r4,0x7c
465 l.add r4,r4,r1
466 l.j align_end
467 l.sw 0(r4),r5
468
469lws: l.lbs r5,0(r2)
470 l.slli r5,r5,24
471 l.lbz r6,1(r2)
472 l.slli r6,r6,16
473 l.or r5,r5,r6
474 l.lbz r6,2(r2)
475 l.slli r6,r6,8
476 l.or r5,r5,r6
477 l.lbz r6,3(r2)
478 l.or r5,r5,r6
479 l.srli r4,r3,19
480 l.andi r4,r4,0x7c
481 l.add r4,r4,r1
482 l.j align_end
483 l.sw 0(r4),r5
484
485lwz: l.lbz r5,0(r2)
486 l.slli r5,r5,24
487 l.lbz r6,1(r2)
488 l.slli r6,r6,16
489 l.or r5,r5,r6
490 l.lbz r6,2(r2)
491 l.slli r6,r6,8
492 l.or r5,r5,r6
493 l.lbz r6,3(r2)
494 l.or r5,r5,r6
495 l.srli r4,r3,19
496 l.andi r4,r4,0x7c
497 l.add r4,r4,r1
498 l.j align_end
499 l.sw 0(r4),r5
500
501sh:
502 l.srli r4,r3,9
503 l.andi r4,r4,0x7c
504 l.add r4,r4,r1
505 l.lwz r5,0(r4)
506 l.sb 1(r2),r5
507 l.srli r5,r5,8
508 l.j align_end
509 l.sb 0(r2),r5
510
511sw:
512 l.srli r4,r3,9
513 l.andi r4,r4,0x7c
514 l.add r4,r4,r1
515 l.lwz r5,0(r4)
516 l.sb 3(r2),r5
517 l.srli r5,r5,8
518 l.sb 2(r2),r5
519 l.srli r5,r5,8
520 l.sb 1(r2),r5
521 l.srli r5,r5,8
522 l.j align_end
523 l.sb 0(r2),r5
524
525align_end:
526 l.j _ret_from_intr
527 l.nop
528#endif
529
530/* ---[ 0x700: Illegal insn exception ]---------------------------------- */
531
532EXCEPTION_ENTRY(_illegal_instruction_handler)
533 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
534 l.jal do_illegal_instruction
535 l.addi r3,r1,0 /* pt_regs */
536
537 l.j _ret_from_exception
538 l.nop
539
540/* ---[ 0x800: External interrupt exception ]---------------------------- */
541
542EXCEPTION_ENTRY(_external_irq_handler)
543#ifdef CONFIG_OPENRISC_ESR_EXCEPTION_BUG_CHECK
544 l.lwz r4,PT_SR(r1) // were interrupts enabled ?
545 l.andi r4,r4,SPR_SR_IEE
546 l.sfeqi r4,0
547 l.bnf 1f // ext irq enabled, all ok.
548 l.nop
549
550 l.addi r1,r1,-0x8
551 l.movhi r3,hi(42f)
552 l.ori r3,r3,lo(42f)
553 l.sw 0x0(r1),r3
554 l.jal printk
555 l.sw 0x4(r1),r4
556 l.addi r1,r1,0x8
557
558 .section .rodata, "a"
55942:
560 .string "\n\rESR interrupt bug: in _external_irq_handler (ESR %x)\n\r"
561 .align 4
562 .previous
563
564 l.ori r4,r4,SPR_SR_IEE // fix the bug
565// l.sw PT_SR(r1),r4
5661:
567#endif
568 CLEAR_LWA_FLAG(r3)
569 l.addi r3,r1,0
570 l.movhi r8,hi(do_IRQ)
571 l.ori r8,r8,lo(do_IRQ)
572 l.jalr r8
573 l.nop
574 l.j _ret_from_intr
575 l.nop
576
577/* ---[ 0x900: DTLB miss exception ]------------------------------------- */
578
579
580/* ---[ 0xa00: ITLB miss exception ]------------------------------------- */
581
582
583/* ---[ 0xb00: Range exception ]----------------------------------------- */
584
585UNHANDLED_EXCEPTION(_vector_0xb00,0xb00)
586
587/* ---[ 0xc00: Syscall exception ]--------------------------------------- */
588
589/*
590 * Syscalls are a special type of exception in that they are
591 * _explicitly_ invoked by userspace and can therefore be
592 * held to conform to the same ABI as normal functions with
593 * respect to whether registers are preserved across the call
594 * or not.
595 */
596
597/* Upon syscall entry we just save the callee-saved registers
598 * and not the call-clobbered ones.
599 */
600
601_string_syscall_return:
602 .string "syscall return %ld \n\r\0"
603 .align 4
604
605ENTRY(_sys_call_handler)
606 /* r1, EPCR, ESR a already saved */
607 l.sw PT_GPR2(r1),r2
608 /* r3-r8 must be saved because syscall restart relies
609 * on us being able to restart the syscall args... technically
610 * they should be clobbered, otherwise
611 */
612 l.sw PT_GPR3(r1),r3
613 /*
614 * r4 already saved
615 * r4 holds the EEAR address of the fault, use it as screatch reg and
616 * then load the original r4
617 */
618 CLEAR_LWA_FLAG(r4)
619 l.lwz r4,PT_GPR4(r1)
620 l.sw PT_GPR5(r1),r5
621 l.sw PT_GPR6(r1),r6
622 l.sw PT_GPR7(r1),r7
623 l.sw PT_GPR8(r1),r8
624 l.sw PT_GPR9(r1),r9
625 /* r10 already saved */
626 l.sw PT_GPR11(r1),r11
627 /* orig_gpr11 must be set for syscalls */
628 l.sw PT_ORIG_GPR11(r1),r11
629 /* r12,r13 already saved */
630
631 /* r14-r28 (even) aren't touched by the syscall fast path below
632 * so we don't need to save them. However, the functions that return
633 * to userspace via a call to switch() DO need to save these because
634 * switch() effectively clobbers them... saving these registers for
635 * such functions is handled in their syscall wrappers (see fork, vfork,
636 * and clone, below).
637
638 /* r30 is the only register we clobber in the fast path */
639 /* r30 already saved */
640/* l.sw PT_GPR30(r1),r30 */
641
642_syscall_check_trace_enter:
643 /* syscalls run with interrupts enabled */
644 TRACE_IRQS_ON_SYSCALL
645 ENABLE_INTERRUPTS(r29) // enable interrupts, r29 is temp
646
647 /* If TIF_SYSCALL_TRACE is set, then we want to do syscall tracing */
648 l.lwz r30,TI_FLAGS(r10)
649 l.andi r30,r30,_TIF_SYSCALL_TRACE
650 l.sfne r30,r0
651 l.bf _syscall_trace_enter
652 l.nop
653
654_syscall_check:
655 /* Ensure that the syscall number is reasonable */
656 l.sfgeui r11,__NR_syscalls
657 l.bf _syscall_badsys
658 l.nop
659
660_syscall_call:
661 l.movhi r29,hi(sys_call_table)
662 l.ori r29,r29,lo(sys_call_table)
663 l.slli r11,r11,2
664 l.add r29,r29,r11
665 l.lwz r29,0(r29)
666
667 l.jalr r29
668 l.nop
669
670_syscall_return:
671 /* All syscalls return here... just pay attention to ret_from_fork
672 * which does it in a round-about way.
673 */
674 l.sw PT_GPR11(r1),r11 // save return value
675
676#if 0
677_syscall_debug:
678 l.movhi r3,hi(_string_syscall_return)
679 l.ori r3,r3,lo(_string_syscall_return)
680 l.ori r27,r0,1
681 l.sw -4(r1),r27
682 l.sw -8(r1),r11
683 l.addi r1,r1,-8
684 l.movhi r27,hi(printk)
685 l.ori r27,r27,lo(printk)
686 l.jalr r27
687 l.nop
688 l.addi r1,r1,8
689#endif
690
691_syscall_check_trace_leave:
692 /* r30 is a callee-saved register so this should still hold the
693 * _TIF_SYSCALL_TRACE flag from _syscall_check_trace_enter above...
694 * _syscall_trace_leave expects syscall result to be in pt_regs->r11.
695 */
696 l.sfne r30,r0
697 l.bf _syscall_trace_leave
698 l.nop
699
700/* This is where the exception-return code begins... interrupts need to be
701 * disabled the rest of the way here because we can't afford to miss any
702 * interrupts that set NEED_RESCHED or SIGNALPENDING... really true? */
703
704_syscall_check_work:
705 /* Here we need to disable interrupts */
706 DISABLE_INTERRUPTS(r27,r29)
707 TRACE_IRQS_OFF
708 l.lwz r30,TI_FLAGS(r10)
709 l.andi r30,r30,_TIF_WORK_MASK
710 l.sfne r30,r0
711
712 l.bnf _syscall_resume_userspace
713 l.nop
714
715 /* Work pending follows a different return path, so we need to
716 * make sure that all the call-saved registers get into pt_regs
717 * before branching...
718 */
719 l.sw PT_GPR14(r1),r14
720 l.sw PT_GPR16(r1),r16
721 l.sw PT_GPR18(r1),r18
722 l.sw PT_GPR20(r1),r20
723 l.sw PT_GPR22(r1),r22
724 l.sw PT_GPR24(r1),r24
725 l.sw PT_GPR26(r1),r26
726 l.sw PT_GPR28(r1),r28
727
728 /* _work_pending needs to be called with interrupts disabled */
729 l.j _work_pending
730 l.nop
731
732_syscall_resume_userspace:
733// ENABLE_INTERRUPTS(r29)
734
735
736/* This is the hot path for returning to userspace from a syscall. If there's
737 * work to be done and the branch to _work_pending was taken above, then the
738 * return to userspace will be done via the normal exception return path...
739 * that path restores _all_ registers and will overwrite the "clobbered"
740 * registers with whatever garbage is in pt_regs -- that's OK because those
741 * registers are clobbered anyway and because the extra work is insignificant
742 * in the context of the extra work that _work_pending is doing.
743
744/* Once again, syscalls are special and only guarantee to preserve the
745 * same registers as a normal function call */
746
747/* The assumption here is that the registers r14-r28 (even) are untouched and
748 * don't need to be restored... be sure that that's really the case!
749 */
750
751/* This is still too much... we should only be restoring what we actually
752 * clobbered... we should even be using 'scratch' (odd) regs above so that
753 * we don't need to restore anything, hardly...
754 */
755
756 l.lwz r2,PT_GPR2(r1)
757
758 /* Restore args */
759 /* r3-r8 are technically clobbered, but syscall restart needs these
760 * to be restored...
761 */
762 l.lwz r3,PT_GPR3(r1)
763 l.lwz r4,PT_GPR4(r1)
764 l.lwz r5,PT_GPR5(r1)
765 l.lwz r6,PT_GPR6(r1)
766 l.lwz r7,PT_GPR7(r1)
767 l.lwz r8,PT_GPR8(r1)
768
769 l.lwz r9,PT_GPR9(r1)
770 l.lwz r10,PT_GPR10(r1)
771 l.lwz r11,PT_GPR11(r1)
772
773 /* r30 is the only register we clobber in the fast path */
774 l.lwz r30,PT_GPR30(r1)
775
776 /* Here we use r13-r19 (odd) as scratch regs */
777 l.lwz r13,PT_PC(r1)
778 l.lwz r15,PT_SR(r1)
779 l.lwz r1,PT_SP(r1)
780 /* Interrupts need to be disabled for setting EPCR and ESR
781 * so that another interrupt doesn't come in here and clobber
782 * them before we can use them for our l.rfe */
783 DISABLE_INTERRUPTS(r17,r19)
784 l.mtspr r0,r13,SPR_EPCR_BASE
785 l.mtspr r0,r15,SPR_ESR_BASE
786 l.rfe
787
788/* End of hot path!
789 * Keep the below tracing and error handling out of the hot path...
790*/
791
792_syscall_trace_enter:
793 /* Here we pass pt_regs to do_syscall_trace_enter. Make sure
794 * that function is really getting all the info it needs as
795 * pt_regs isn't a complete set of userspace regs, just the
796 * ones relevant to the syscall...
797 *
798 * Note use of delay slot for setting argument.
799 */
800 l.jal do_syscall_trace_enter
801 l.addi r3,r1,0
802
803 /* Restore arguments (not preserved across do_syscall_trace_enter)
804 * so that we can do the syscall for real and return to the syscall
805 * hot path.
806 */
807 l.lwz r11,PT_GPR11(r1)
808 l.lwz r3,PT_GPR3(r1)
809 l.lwz r4,PT_GPR4(r1)
810 l.lwz r5,PT_GPR5(r1)
811 l.lwz r6,PT_GPR6(r1)
812 l.lwz r7,PT_GPR7(r1)
813
814 l.j _syscall_check
815 l.lwz r8,PT_GPR8(r1)
816
817_syscall_trace_leave:
818 l.jal do_syscall_trace_leave
819 l.addi r3,r1,0
820
821 l.j _syscall_check_work
822 l.nop
823
824_syscall_badsys:
825 /* Here we effectively pretend to have executed an imaginary
826 * syscall that returns -ENOSYS and then return to the regular
827 * syscall hot path.
828 * Note that "return value" is set in the delay slot...
829 */
830 l.j _syscall_return
831 l.addi r11,r0,-ENOSYS
832
833/******* END SYSCALL HANDLING *******/
834
835/* ---[ 0xd00: Trap exception ]------------------------------------------ */
836
837UNHANDLED_EXCEPTION(_vector_0xd00,0xd00)
838
839/* ---[ 0xe00: Trap exception ]------------------------------------------ */
840
841EXCEPTION_ENTRY(_trap_handler)
842 CLEAR_LWA_FLAG(r3)
843 /* r4: EA of fault (set by EXCEPTION_HANDLE) */
844 l.jal do_trap
845 l.addi r3,r1,0 /* pt_regs */
846
847 l.j _ret_from_exception
848 l.nop
849
850/* ---[ 0xf00: Reserved exception ]-------------------------------------- */
851
852UNHANDLED_EXCEPTION(_vector_0xf00,0xf00)
853
854/* ---[ 0x1000: Reserved exception ]------------------------------------- */
855
856UNHANDLED_EXCEPTION(_vector_0x1000,0x1000)
857
858/* ---[ 0x1100: Reserved exception ]------------------------------------- */
859
860UNHANDLED_EXCEPTION(_vector_0x1100,0x1100)
861
862/* ---[ 0x1200: Reserved exception ]------------------------------------- */
863
864UNHANDLED_EXCEPTION(_vector_0x1200,0x1200)
865
866/* ---[ 0x1300: Reserved exception ]------------------------------------- */
867
868UNHANDLED_EXCEPTION(_vector_0x1300,0x1300)
869
870/* ---[ 0x1400: Reserved exception ]------------------------------------- */
871
872UNHANDLED_EXCEPTION(_vector_0x1400,0x1400)
873
874/* ---[ 0x1500: Reserved exception ]------------------------------------- */
875
876UNHANDLED_EXCEPTION(_vector_0x1500,0x1500)
877
878/* ---[ 0x1600: Reserved exception ]------------------------------------- */
879
880UNHANDLED_EXCEPTION(_vector_0x1600,0x1600)
881
882/* ---[ 0x1700: Reserved exception ]------------------------------------- */
883
884UNHANDLED_EXCEPTION(_vector_0x1700,0x1700)
885
886/* ---[ 0x1800: Reserved exception ]------------------------------------- */
887
888UNHANDLED_EXCEPTION(_vector_0x1800,0x1800)
889
890/* ---[ 0x1900: Reserved exception ]------------------------------------- */
891
892UNHANDLED_EXCEPTION(_vector_0x1900,0x1900)
893
894/* ---[ 0x1a00: Reserved exception ]------------------------------------- */
895
896UNHANDLED_EXCEPTION(_vector_0x1a00,0x1a00)
897
898/* ---[ 0x1b00: Reserved exception ]------------------------------------- */
899
900UNHANDLED_EXCEPTION(_vector_0x1b00,0x1b00)
901
902/* ---[ 0x1c00: Reserved exception ]------------------------------------- */
903
904UNHANDLED_EXCEPTION(_vector_0x1c00,0x1c00)
905
906/* ---[ 0x1d00: Reserved exception ]------------------------------------- */
907
908UNHANDLED_EXCEPTION(_vector_0x1d00,0x1d00)
909
910/* ---[ 0x1e00: Reserved exception ]------------------------------------- */
911
912UNHANDLED_EXCEPTION(_vector_0x1e00,0x1e00)
913
914/* ---[ 0x1f00: Reserved exception ]------------------------------------- */
915
916UNHANDLED_EXCEPTION(_vector_0x1f00,0x1f00)
917
918/* ========================================================[ return ] === */
919
920_resume_userspace:
921 DISABLE_INTERRUPTS(r3,r4)
922 TRACE_IRQS_OFF
923 l.lwz r4,TI_FLAGS(r10)
924 l.andi r13,r4,_TIF_WORK_MASK
925 l.sfeqi r13,0
926 l.bf _restore_all
927 l.nop
928
929_work_pending:
930 l.lwz r5,PT_ORIG_GPR11(r1)
931 l.sfltsi r5,0
932 l.bnf 1f
933 l.nop
934 l.andi r5,r5,0
9351:
936 l.jal do_work_pending
937 l.ori r3,r1,0 /* pt_regs */
938
939 l.sfeqi r11,0
940 l.bf _restore_all
941 l.nop
942 l.sfltsi r11,0
943 l.bnf 1f
944 l.nop
945 l.and r11,r11,r0
946 l.ori r11,r11,__NR_restart_syscall
947 l.j _syscall_check_trace_enter
948 l.nop
9491:
950 l.lwz r11,PT_ORIG_GPR11(r1)
951 /* Restore arg registers */
952 l.lwz r3,PT_GPR3(r1)
953 l.lwz r4,PT_GPR4(r1)
954 l.lwz r5,PT_GPR5(r1)
955 l.lwz r6,PT_GPR6(r1)
956 l.lwz r7,PT_GPR7(r1)
957 l.j _syscall_check_trace_enter
958 l.lwz r8,PT_GPR8(r1)
959
960_restore_all:
961#ifdef CONFIG_TRACE_IRQFLAGS
962 l.lwz r4,PT_SR(r1)
963 l.andi r3,r4,(SPR_SR_IEE|SPR_SR_TEE)
964 l.sfeq r3,r0 /* skip trace if irqs were off */
965 l.bf skip_hardirqs_on
966 l.nop
967 TRACE_IRQS_ON
968skip_hardirqs_on:
969#endif
970 RESTORE_ALL
971 /* This returns to userspace code */
972
973
974ENTRY(_ret_from_intr)
975ENTRY(_ret_from_exception)
976 l.lwz r4,PT_SR(r1)
977 l.andi r3,r4,SPR_SR_SM
978 l.sfeqi r3,0
979 l.bnf _restore_all
980 l.nop
981 l.j _resume_userspace
982 l.nop
983
984ENTRY(ret_from_fork)
985 l.jal schedule_tail
986 l.nop
987
988 /* Check if we are a kernel thread */
989 l.sfeqi r20,0
990 l.bf 1f
991 l.nop
992
993 /* ...we are a kernel thread so invoke the requested callback */
994 l.jalr r20
995 l.or r3,r22,r0
996
9971:
998 /* _syscall_returns expect r11 to contain return value */
999 l.lwz r11,PT_GPR11(r1)
1000
1001 /* The syscall fast path return expects call-saved registers
1002 * r12-r28 to be untouched, so we restore them here as they
1003 * will have been effectively clobbered when arriving here
1004 * via the call to switch()
1005 */
1006 l.lwz r12,PT_GPR12(r1)
1007 l.lwz r14,PT_GPR14(r1)
1008 l.lwz r16,PT_GPR16(r1)
1009 l.lwz r18,PT_GPR18(r1)
1010 l.lwz r20,PT_GPR20(r1)
1011 l.lwz r22,PT_GPR22(r1)
1012 l.lwz r24,PT_GPR24(r1)
1013 l.lwz r26,PT_GPR26(r1)
1014 l.lwz r28,PT_GPR28(r1)
1015
1016 l.j _syscall_return
1017 l.nop
1018
1019/* ========================================================[ switch ] === */
1020
1021/*
1022 * This routine switches between two different tasks. The process
1023 * state of one is saved on its kernel stack. Then the state
1024 * of the other is restored from its kernel stack. The memory
1025 * management hardware is updated to the second process's state.
1026 * Finally, we can return to the second process, via the 'return'.
1027 *
1028 * Note: there are two ways to get to the "going out" portion
1029 * of this code; either by coming in via the entry (_switch)
1030 * or via "fork" which must set up an environment equivalent
1031 * to the "_switch" path. If you change this (or in particular, the
1032 * SAVE_REGS macro), you'll have to change the fork code also.
1033 */
1034
1035
1036/* _switch MUST never lay on page boundry, cause it runs from
1037 * effective addresses and beeing interrupted by iTLB miss would kill it.
1038 * dTLB miss seams to never accour in the bad place since data accesses
1039 * are from task structures which are always page aligned.
1040 *
1041 * The problem happens in RESTORE_ALL_NO_R11 where we first set the EPCR
1042 * register, then load the previous register values and only at the end call
1043 * the l.rfe instruction. If get TLB miss in beetwen the EPCR register gets
1044 * garbled and we end up calling l.rfe with the wrong EPCR. (same probably
1045 * holds for ESR)
1046 *
1047 * To avoid this problems it is sufficient to align _switch to
1048 * some nice round number smaller than it's size...
1049 */
1050
1051/* ABI rules apply here... we either enter _switch via schedule() or via
1052 * an imaginary call to which we shall return at return_from_fork. Either
1053 * way, we are a function call and only need to preserve the callee-saved
1054 * registers when we return. As such, we don't need to save the registers
1055 * on the stack that we won't be returning as they were...
1056 */
1057
1058 .align 0x400
1059ENTRY(_switch)
1060 /* We don't store SR as _switch only gets called in a context where
1061 * the SR will be the same going in and coming out... */
1062
1063 /* Set up new pt_regs struct for saving task state */
1064 l.addi r1,r1,-(INT_FRAME_SIZE)
1065
1066 /* No need to store r1/PT_SP as it goes into KSP below */
1067 l.sw PT_GPR2(r1),r2
1068 l.sw PT_GPR9(r1),r9
1069 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
1070 * and expects r12 to be callee-saved... */
1071 l.sw PT_GPR12(r1),r12
1072 l.sw PT_GPR14(r1),r14
1073 l.sw PT_GPR16(r1),r16
1074 l.sw PT_GPR18(r1),r18
1075 l.sw PT_GPR20(r1),r20
1076 l.sw PT_GPR22(r1),r22
1077 l.sw PT_GPR24(r1),r24
1078 l.sw PT_GPR26(r1),r26
1079 l.sw PT_GPR28(r1),r28
1080 l.sw PT_GPR30(r1),r30
1081
1082 l.addi r11,r10,0 /* Save old 'current' to 'last' return value*/
1083
1084 /* We use thread_info->ksp for storing the address of the above
1085 * structure so that we can get back to it later... we don't want
1086 * to lose the value of thread_info->ksp, though, so store it as
1087 * pt_regs->sp so that we can easily restore it when we are made
1088 * live again...
1089 */
1090
1091 /* Save the old value of thread_info->ksp as pt_regs->sp */
1092 l.lwz r29,TI_KSP(r10)
1093 l.sw PT_SP(r1),r29
1094
1095 /* Swap kernel stack pointers */
1096 l.sw TI_KSP(r10),r1 /* Save old stack pointer */
1097 l.or r10,r4,r0 /* Set up new current_thread_info */
1098 l.lwz r1,TI_KSP(r10) /* Load new stack pointer */
1099
1100 /* Restore the old value of thread_info->ksp */
1101 l.lwz r29,PT_SP(r1)
1102 l.sw TI_KSP(r10),r29
1103
1104 /* ...and restore the registers, except r11 because the return value
1105 * has already been set above.
1106 */
1107 l.lwz r2,PT_GPR2(r1)
1108 l.lwz r9,PT_GPR9(r1)
1109 /* No need to restore r10 */
1110 /* ...and do not restore r11 */
1111
1112 /* This is wrong, r12 shouldn't be here... but GCC is broken for the time being
1113 * and expects r12 to be callee-saved... */
1114 l.lwz r12,PT_GPR12(r1)
1115 l.lwz r14,PT_GPR14(r1)
1116 l.lwz r16,PT_GPR16(r1)
1117 l.lwz r18,PT_GPR18(r1)
1118 l.lwz r20,PT_GPR20(r1)
1119 l.lwz r22,PT_GPR22(r1)
1120 l.lwz r24,PT_GPR24(r1)
1121 l.lwz r26,PT_GPR26(r1)
1122 l.lwz r28,PT_GPR28(r1)
1123 l.lwz r30,PT_GPR30(r1)
1124
1125 /* Unwind stack to pre-switch state */
1126 l.addi r1,r1,(INT_FRAME_SIZE)
1127
1128 /* Return via the link-register back to where we 'came from', where
1129 * that may be either schedule(), ret_from_fork(), or
1130 * ret_from_kernel_thread(). If we are returning to a new thread,
1131 * we are expected to have set up the arg to schedule_tail already,
1132 * hence we do so here unconditionally:
1133 */
1134 l.lwz r3,TI_TASK(r3) /* Load 'prev' as schedule_tail arg */
1135 l.jr r9
1136 l.nop
1137
1138/* ==================================================================== */
1139
1140/* These all use the delay slot for setting the argument register, so the
1141 * jump is always happening after the l.addi instruction.
1142 *
1143 * These are all just wrappers that don't touch the link-register r9, so the
1144 * return from the "real" syscall function will return back to the syscall
1145 * code that did the l.jal that brought us here.
1146 */
1147
1148/* fork requires that we save all the callee-saved registers because they
1149 * are all effectively clobbered by the call to _switch. Here we store
1150 * all the registers that aren't touched by the syscall fast path and thus
1151 * weren't saved there.
1152 */
1153
1154_fork_save_extra_regs_and_call:
1155 l.sw PT_GPR14(r1),r14
1156 l.sw PT_GPR16(r1),r16
1157 l.sw PT_GPR18(r1),r18
1158 l.sw PT_GPR20(r1),r20
1159 l.sw PT_GPR22(r1),r22
1160 l.sw PT_GPR24(r1),r24
1161 l.sw PT_GPR26(r1),r26
1162 l.jr r29
1163 l.sw PT_GPR28(r1),r28
1164
1165ENTRY(__sys_clone)
1166 l.movhi r29,hi(sys_clone)
1167 l.ori r29,r29,lo(sys_clone)
1168 l.j _fork_save_extra_regs_and_call
1169 l.nop
1170
1171ENTRY(__sys_fork)
1172 l.movhi r29,hi(sys_fork)
1173 l.ori r29,r29,lo(sys_fork)
1174 l.j _fork_save_extra_regs_and_call
1175 l.nop
1176
1177ENTRY(sys_rt_sigreturn)
1178 l.jal _sys_rt_sigreturn
1179 l.addi r3,r1,0
1180 l.sfne r30,r0
1181 l.bnf _no_syscall_trace
1182 l.nop
1183 l.jal do_syscall_trace_leave
1184 l.addi r3,r1,0
1185_no_syscall_trace:
1186 l.j _resume_userspace
1187 l.nop
1188
1189/* This is a catch-all syscall for atomic instructions for the OpenRISC 1000.
1190 * The functions takes a variable number of parameters depending on which
1191 * particular flavour of atomic you want... parameter 1 is a flag identifying
1192 * the atomic in question. Currently, this function implements the
1193 * following variants:
1194 *
1195 * XCHG:
1196 * @flag: 1
1197 * @ptr1:
1198 * @ptr2:
1199 * Atomically exchange the values in pointers 1 and 2.
1200 *
1201 */
1202
1203ENTRY(sys_or1k_atomic)
1204 /* FIXME: This ignores r3 and always does an XCHG */
1205 DISABLE_INTERRUPTS(r17,r19)
1206 l.lwz r29,0(r4)
1207 l.lwz r27,0(r5)
1208 l.sw 0(r4),r27
1209 l.sw 0(r5),r29
1210 ENABLE_INTERRUPTS(r17)
1211 l.jr r9
1212 l.or r11,r0,r0
1213
1214/* ============================================================[ EOF ]=== */