Loading...
1/*
2 * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50 model = "FriendlyARM NanoPi NEO Air";
51 compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
52
53 aliases {
54 serial0 = &uart0;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60
61 leds {
62 compatible = "gpio-leds";
63
64 pwr {
65 label = "nanopi:green:pwr";
66 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
67 default-state = "on";
68 };
69
70 status {
71 label = "nanopi:blue:status";
72 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
73 };
74 };
75
76 wifi_pwrseq: wifi_pwrseq {
77 compatible = "mmc-pwrseq-simple";
78 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
79 };
80};
81
82&mmc0 {
83 vmmc-supply = <®_vcc3v3>;
84 bus-width = <4>;
85 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
86 status = "okay";
87};
88
89&mmc1 {
90 vmmc-supply = <®_vcc3v3>;
91 vqmmc-supply = <®_vcc3v3>;
92 mmc-pwrseq = <&wifi_pwrseq>;
93 bus-width = <4>;
94 non-removable;
95 status = "okay";
96
97 brcmf: bcrmf@1 {
98 reg = <1>;
99 compatible = "brcm,bcm4329-fmac";
100 interrupt-parent = <&pio>;
101 interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
102 interrupt-names = "host-wake";
103 };
104};
105
106&uart0 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&uart0_pins_a>;
109 status = "okay";
110};
111
112&usbphy {
113 /* USB VBUS is always on */
114 status = "okay";
115};
1/*
2 * Copyright (C) 2017 Jelle van der Waa <jelle@vdwaa.nl>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48
49/ {
50 model = "FriendlyARM NanoPi NEO Air";
51 compatible = "friendlyarm,nanopi-neo-air", "allwinner,sun8i-h3";
52
53 aliases {
54 serial0 = &uart0;
55 };
56
57 chosen {
58 stdout-path = "serial0:115200n8";
59 };
60
61 leds {
62 compatible = "gpio-leds";
63
64 pwr {
65 label = "nanopi:green:pwr";
66 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
67 default-state = "on";
68 };
69
70 status {
71 label = "nanopi:blue:status";
72 gpios = <&pio 0 10 GPIO_ACTIVE_HIGH>; /* PA10 */
73 };
74 };
75
76 wifi_pwrseq: wifi_pwrseq {
77 compatible = "mmc-pwrseq-simple";
78 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
79 };
80};
81
82&mmc0 {
83 vmmc-supply = <®_vcc3v3>;
84 bus-width = <4>;
85 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
86 status = "okay";
87};
88
89&mmc1 {
90 vmmc-supply = <®_vcc3v3>;
91 vqmmc-supply = <®_vcc3v3>;
92 mmc-pwrseq = <&wifi_pwrseq>;
93 bus-width = <4>;
94 non-removable;
95 status = "okay";
96
97 brcmf: bcrmf@1 {
98 reg = <1>;
99 compatible = "brcm,bcm4329-fmac";
100 interrupt-parent = <&pio>;
101 interrupts = <6 10 IRQ_TYPE_LEVEL_LOW>; /* PG10 / EINT10 */
102 interrupt-names = "host-wake";
103 };
104};
105
106&uart0 {
107 pinctrl-names = "default";
108 pinctrl-0 = <&uart0_pa_pins>;
109 status = "okay";
110};
111
112&usbphy {
113 /* USB VBUS is always on */
114 status = "okay";
115};