Loading...
1/*
2 * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/* The SinA31s development board has the SinA31s core board soldered on */
44#include "sun6i-a31s-sina31s-core.dtsi"
45
46#include <dt-bindings/input/input.h>
47
48/ {
49 model = "Sinlinx SinA31s Development Board";
50 compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
51
52 chosen {
53 stdout-path = "serial0:115200n8";
54 };
55
56 hdmi-connector {
57 compatible = "hdmi-connector";
58 type = "a";
59
60 port {
61 hdmi_con_in: endpoint {
62 remote-endpoint = <&hdmi_out_con>;
63 };
64 };
65 };
66
67 leds {
68 compatible = "gpio-leds";
69 pinctrl-names = "default";
70 pinctrl-0 = <&led_pin_sina31s>;
71
72 status {
73 label = "sina31s:status:usr";
74 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
75 };
76 };
77
78 sound {
79 compatible = "simple-audio-card";
80 simple-audio-card,name = "On-board SPDIF";
81 simple-audio-card,cpu {
82 sound-dai = <&spdif>;
83 };
84
85 simple-audio-card,codec {
86 sound-dai = <&spdif_out>;
87 };
88 };
89
90 spdif_out: spdif-out {
91 #sound-dai-cells = <0>;
92 compatible = "linux,spdif-dit";
93 };
94};
95
96&codec {
97 allwinner,audio-routing =
98 "Line Out", "LINEOUT",
99 "MIC1", "Mic",
100 "Mic", "MBIAS";
101 status = "okay";
102};
103
104&de {
105 status = "okay";
106};
107
108&ehci0 {
109 /* USB 2.0 4 port hub IC */
110 status = "okay";
111};
112
113&ehci1 {
114 status = "okay";
115};
116
117&gmac {
118 pinctrl-names = "default";
119 pinctrl-0 = <&gmac_pins_mii_a>;
120 phy = <&phy1>;
121 phy-mode = "mii";
122 phy-supply = <®_dldo1>;
123 status = "okay";
124
125 phy1: ethernet-phy@1 {
126 reg = <1>;
127 };
128};
129
130&hdmi {
131 status = "okay";
132};
133
134&hdmi_out {
135 hdmi_out_con: endpoint {
136 remote-endpoint = <&hdmi_con_in>;
137 };
138};
139
140&ir {
141 pinctrl-names = "default";
142 pinctrl-0 = <&ir_pins_a>;
143 status = "okay";
144};
145
146&lradc {
147 vref-supply = <®_aldo3>;
148 status = "okay";
149
150 button@158 {
151 label = "Volume Up";
152 linux,code = <KEY_VOLUMEUP>;
153 channel = <0>;
154 voltage = <158730>;
155 };
156
157 button@349 {
158 label = "Volume Down";
159 linux,code = <KEY_VOLUMEDOWN>;
160 channel = <0>;
161 voltage = <349206>;
162 };
163};
164
165&mmc0 {
166 pinctrl-names = "default";
167 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_sina31s>;
168 vmmc-supply = <®_dcdc1>;
169 bus-width = <4>;
170 cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
171 status = "okay";
172};
173
174&ohci1 {
175 status = "okay";
176};
177
178&pio {
179 led_pin_sina31s: led_pin@0 {
180 pins = "PH13";
181 function = "gpio_out";
182 };
183
184 mmc0_cd_pin_sina31s: mmc0_cd_pin@0 {
185 pins = "PA4";
186 function = "gpio_in";
187 bias-pull-up;
188 };
189};
190
191®_dldo1 {
192 regulator-min-microvolt = <3300000>;
193 regulator-max-microvolt = <3300000>;
194 regulator-name = "vcc-gmac-phy";
195};
196
197&spdif {
198 pinctrl-names = "default";
199 pinctrl-0 = <&spdif_pins_a>;
200 status = "okay";
201};
202
203&usb_otg {
204 dr_mode = "peripheral";
205 status = "okay";
206};
207
208&usbphy {
209 status = "okay";
210};
1/*
2 * Copyright 2015 Chen-Yu Tsai <wens@csie.org>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/* The SinA31s development board has the SinA31s core board soldered on */
44#include "sun6i-a31s-sina31s-core.dtsi"
45
46#include <dt-bindings/input/input.h>
47
48/ {
49 model = "Sinlinx SinA31s Development Board";
50 compatible = "sinlinx,sina31s-sdk", "allwinner,sun6i-a31s";
51
52 chosen {
53 stdout-path = "serial0:115200n8";
54 };
55
56 hdmi-connector {
57 compatible = "hdmi-connector";
58 type = "a";
59
60 port {
61 hdmi_con_in: endpoint {
62 remote-endpoint = <&hdmi_out_con>;
63 };
64 };
65 };
66
67 leds {
68 compatible = "gpio-leds";
69
70 status {
71 label = "sina31s:status:usr";
72 gpios = <&pio 7 13 GPIO_ACTIVE_HIGH>; /* PH13 */
73 };
74 };
75
76 sound {
77 compatible = "simple-audio-card";
78 simple-audio-card,name = "On-board SPDIF";
79 simple-audio-card,cpu {
80 sound-dai = <&spdif>;
81 };
82
83 simple-audio-card,codec {
84 sound-dai = <&spdif_out>;
85 };
86 };
87
88 spdif_out: spdif-out {
89 #sound-dai-cells = <0>;
90 compatible = "linux,spdif-dit";
91 };
92};
93
94&codec {
95 allwinner,audio-routing =
96 "Line Out", "LINEOUT",
97 "MIC1", "Mic",
98 "Mic", "MBIAS";
99 status = "okay";
100};
101
102&de {
103 status = "okay";
104};
105
106&ehci0 {
107 /* USB 2.0 4 port hub IC */
108 status = "okay";
109};
110
111&ehci1 {
112 status = "okay";
113};
114
115&gmac {
116 pinctrl-names = "default";
117 pinctrl-0 = <&gmac_mii_pins>;
118 phy-handle = <&phy1>;
119 phy-mode = "mii";
120 phy-supply = <®_dldo1>;
121 status = "okay";
122};
123
124&hdmi {
125 status = "okay";
126};
127
128&hdmi_out {
129 hdmi_out_con: endpoint {
130 remote-endpoint = <&hdmi_con_in>;
131 };
132};
133
134&ir {
135 pinctrl-names = "default";
136 pinctrl-0 = <&s_ir_rx_pin>;
137 status = "okay";
138};
139
140&lradc {
141 vref-supply = <®_aldo3>;
142 status = "okay";
143
144 button-158 {
145 label = "Volume Up";
146 linux,code = <KEY_VOLUMEUP>;
147 channel = <0>;
148 voltage = <158730>;
149 };
150
151 button-349 {
152 label = "Volume Down";
153 linux,code = <KEY_VOLUMEDOWN>;
154 channel = <0>;
155 voltage = <349206>;
156 };
157};
158
159&mdio {
160 phy1: ethernet-phy@1 {
161 reg = <1>;
162 };
163};
164
165&mmc0 {
166 vmmc-supply = <®_dcdc1>;
167 bus-width = <4>;
168 cd-gpios = <&pio 0 4 GPIO_ACTIVE_LOW>; /* PA4 */
169 status = "okay";
170};
171
172&ohci1 {
173 status = "okay";
174};
175
176®_dldo1 {
177 regulator-min-microvolt = <3300000>;
178 regulator-max-microvolt = <3300000>;
179 regulator-name = "vcc-gmac-phy";
180};
181
182&spdif {
183 pinctrl-names = "default";
184 pinctrl-0 = <&spdif_tx_pin>;
185 status = "okay";
186};
187
188&usb_otg {
189 dr_mode = "peripheral";
190 status = "okay";
191};
192
193&usbphy {
194 status = "okay";
195};