Loading...
1/*
2 * Copyright 2014 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49
50/ {
51 /* these are used by bootloader for disabling nodes */
52 aliases {
53 led0 = &led0;
54 nand = &gpmi;
55 ssi0 = &ssi1;
56 usb0 = &usbh1;
57 usb1 = &usbotg;
58 };
59
60 chosen {
61 bootargs = "console=ttymxc1,115200";
62 };
63
64 leds {
65 compatible = "gpio-leds";
66 pinctrl-names = "default";
67 pinctrl-0 = <&pinctrl_gpio_leds>;
68
69 led0: user1 {
70 label = "user1";
71 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
72 default-state = "on";
73 linux,default-trigger = "heartbeat";
74 };
75 };
76
77 memory@10000000 {
78 reg = <0x10000000 0x20000000>;
79 };
80
81 reg_5p0v: regulator-5p0v {
82 compatible = "regulator-fixed";
83 regulator-name = "5P0V";
84 regulator-min-microvolt = <5000000>;
85 regulator-max-microvolt = <5000000>;
86 };
87
88 reg_usb_h1_vbus: regulator-usb-h1-vbus {
89 compatible = "regulator-fixed";
90 regulator-name = "usb_h1_vbus";
91 regulator-min-microvolt = <5000000>;
92 regulator-max-microvolt = <5000000>;
93 };
94
95 reg_usb_otg_vbus: regulator-usb-otg-vbus {
96 compatible = "regulator-fixed";
97 regulator-name = "usb_otg_vbus";
98 regulator-min-microvolt = <5000000>;
99 regulator-max-microvolt = <5000000>;
100 };
101};
102
103&can1 {
104 pinctrl-names = "default";
105 pinctrl-0 = <&pinctrl_flexcan1>;
106 status = "okay";
107};
108
109&gpmi {
110 pinctrl-names = "default";
111 pinctrl-0 = <&pinctrl_gpmi_nand>;
112 status = "okay";
113};
114
115&hdmi {
116 ddc-i2c-bus = <&i2c3>;
117 status = "okay";
118};
119
120&i2c1 {
121 clock-frequency = <100000>;
122 pinctrl-names = "default";
123 pinctrl-0 = <&pinctrl_i2c1>;
124 status = "okay";
125
126 eeprom1: eeprom@50 {
127 compatible = "atmel,24c02";
128 reg = <0x50>;
129 pagesize = <16>;
130 };
131
132 eeprom2: eeprom@51 {
133 compatible = "atmel,24c02";
134 reg = <0x51>;
135 pagesize = <16>;
136 };
137
138 eeprom3: eeprom@52 {
139 compatible = "atmel,24c02";
140 reg = <0x52>;
141 pagesize = <16>;
142 };
143
144 eeprom4: eeprom@53 {
145 compatible = "atmel,24c02";
146 reg = <0x53>;
147 pagesize = <16>;
148 };
149
150 gpio: pca9555@23 {
151 compatible = "nxp,pca9555";
152 reg = <0x23>;
153 gpio-controller;
154 #gpio-cells = <2>;
155 };
156
157 rtc: ds1672@68 {
158 compatible = "dallas,ds1672";
159 reg = <0x68>;
160 };
161};
162
163&i2c2 {
164 clock-frequency = <100000>;
165 pinctrl-names = "default";
166 pinctrl-0 = <&pinctrl_i2c2>;
167 status = "okay";
168
169 ltc3676: pmic@3c {
170 compatible = "lltc,ltc3676";
171 reg = <0x3c>;
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_pmic>;
174 interrupt-parent = <&gpio1>;
175 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
176
177 regulators {
178 /* VDD_SOC (1+R1/R2 = 1.635) */
179 reg_vdd_soc: sw1 {
180 regulator-name = "vddsoc";
181 regulator-min-microvolt = <674400>;
182 regulator-max-microvolt = <1308000>;
183 lltc,fb-voltage-divider = <127000 200000>;
184 regulator-ramp-delay = <7000>;
185 regulator-boot-on;
186 regulator-always-on;
187 };
188
189 /* VDD_DDR (1+R1/R2 = 2.105) */
190 reg_vdd_ddr: sw2 {
191 regulator-name = "vddddr";
192 regulator-min-microvolt = <868310>;
193 regulator-max-microvolt = <1684000>;
194 lltc,fb-voltage-divider = <221000 200000>;
195 regulator-ramp-delay = <7000>;
196 regulator-boot-on;
197 regulator-always-on;
198 };
199
200 /* VDD_ARM (1+R1/R2 = 1.635) */
201 reg_vdd_arm: sw3 {
202 regulator-name = "vddarm";
203 regulator-min-microvolt = <674400>;
204 regulator-max-microvolt = <1308000>;
205 lltc,fb-voltage-divider = <127000 200000>;
206 regulator-ramp-delay = <7000>;
207 regulator-boot-on;
208 regulator-always-on;
209 };
210
211 /* VDD_3P3 (1+R1/R2 = 1.281) */
212 reg_3p3: sw4 {
213 regulator-name = "vdd3p3";
214 regulator-min-microvolt = <1880000>;
215 regulator-max-microvolt = <3647000>;
216 lltc,fb-voltage-divider = <200000 56200>;
217 regulator-ramp-delay = <7000>;
218 regulator-boot-on;
219 regulator-always-on;
220 };
221
222 /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
223 reg_1p8a: ldo2 {
224 regulator-name = "vdd1p8a";
225 regulator-min-microvolt = <1816125>;
226 regulator-max-microvolt = <1816125>;
227 lltc,fb-voltage-divider = <301000 200000>;
228 regulator-boot-on;
229 regulator-always-on;
230 };
231
232 /* VDD_1P8b: HDMI In analog */
233 reg_1p8b: ldo3 {
234 regulator-name = "vdd1p8b";
235 regulator-min-microvolt = <1800000>;
236 regulator-max-microvolt = <1800000>;
237 regulator-boot-on;
238 };
239
240 /* VDD_HIGH (1+R1/R2 = 4.17) */
241 reg_3p0: ldo4 {
242 regulator-name = "vdd3p0";
243 regulator-min-microvolt = <3023250>;
244 regulator-max-microvolt = <3023250>;
245 lltc,fb-voltage-divider = <634000 200000>;
246 regulator-boot-on;
247 regulator-always-on;
248 };
249 };
250 };
251};
252
253&i2c3 {
254 clock-frequency = <100000>;
255 pinctrl-names = "default";
256 pinctrl-0 = <&pinctrl_i2c3>;
257 status = "okay";
258
259 gpio_exp: pca9555@24 {
260 compatible = "nxp,pca9555";
261 reg = <0x24>;
262 gpio-controller;
263 #gpio-cells = <2>;
264 };
265
266};
267
268&pcie {
269 pinctrl-names = "default";
270 pinctrl-0 = <&pinctrl_pcie>;
271 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
272 status = "okay";
273};
274
275&pwm2 {
276 pinctrl-names = "default";
277 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
278 status = "disabled";
279};
280
281&pwm3 {
282 pinctrl-names = "default";
283 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
284 status = "disabled";
285};
286
287&ssi1 {
288 status = "okay";
289};
290
291&uart2 {
292 pinctrl-names = "default";
293 pinctrl-0 = <&pinctrl_uart2>;
294 status = "okay";
295};
296
297&uart3 {
298 pinctrl-names = "default";
299 pinctrl-0 = <&pinctrl_uart3>;
300 status = "okay";
301};
302
303&usbotg {
304 vbus-supply = <®_usb_otg_vbus>;
305 pinctrl-names = "default";
306 pinctrl-0 = <&pinctrl_usbotg>;
307 disable-over-current;
308 status = "okay";
309};
310
311&usbh1 {
312 vbus-supply = <®_usb_h1_vbus>;
313 status = "okay";
314};
315
316&wdog1 {
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_wdog>;
319 fsl,ext-reset-output;
320};
321
322&iomuxc {
323 pinctrl_flexcan1: flexcan1grp {
324 fsl,pins = <
325 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
326 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
327 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
328 >;
329 };
330
331 pinctrl_gpio_leds: gpioledsgrp {
332 fsl,pins = <
333 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
334 >;
335 };
336
337 pinctrl_gpmi_nand: gpminandgrp {
338 fsl,pins = <
339 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
340 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
341 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
342 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
343 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
344 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
345 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
346 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
347 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
348 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
349 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
350 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
351 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
352 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
353 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
354 >;
355 };
356
357 pinctrl_i2c1: i2c1grp {
358 fsl,pins = <
359 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
360 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
361 >;
362 };
363
364 pinctrl_i2c2: i2c2grp {
365 fsl,pins = <
366 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
367 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
368 >;
369 };
370
371 pinctrl_i2c3: i2c3grp {
372 fsl,pins = <
373 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
374 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
375 >;
376 };
377
378 pinctrl_pcie: pciegrp {
379 fsl,pins = <
380 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
381 >;
382 };
383
384 pinctrl_pmic: pmicgrp {
385 fsl,pins = <
386 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
387 >;
388 };
389
390 pinctrl_pwm2: pwm2grp {
391 fsl,pins = <
392 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
393 >;
394 };
395
396 pinctrl_pwm3: pwm3grp {
397 fsl,pins = <
398 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
399 >;
400 };
401
402 pinctrl_uart2: uart2grp {
403 fsl,pins = <
404 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
405 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
406 >;
407 };
408
409 pinctrl_uart3: uart3grp {
410 fsl,pins = <
411 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
412 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
413 >;
414 };
415
416 pinctrl_usbotg: usbotggrp {
417 fsl,pins = <
418 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
419 >;
420 };
421
422 pinctrl_wdog: wdoggrp {
423 fsl,pins = <
424 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
425 >;
426 };
427};
1/*
2 * Copyright 2014 Gateworks Corporation
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of
12 * the License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * You should have received a copy of the GNU General Public
20 * License along with this file; if not, write to the Free
21 * Software Foundation, Inc., 51 Franklin St, Fifth Floor, Boston,
22 * MA 02110-1301 USA
23 *
24 * Or, alternatively,
25 *
26 * b) Permission is hereby granted, free of charge, to any person
27 * obtaining a copy of this software and associated documentation
28 * files (the "Software"), to deal in the Software without
29 * restriction, including without limitation the rights to use,
30 * copy, modify, merge, publish, distribute, sublicense, and/or
31 * sell copies of the Software, and to permit persons to whom the
32 * Software is furnished to do so, subject to the following
33 * conditions:
34 *
35 * The above copyright notice and this permission notice shall be
36 * included in all copies or substantial portions of the Software.
37 *
38 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
39 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
40 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
41 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
42 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
43 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
44 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
45 * OTHER DEALINGS IN THE SOFTWARE.
46 */
47
48#include <dt-bindings/gpio/gpio.h>
49#include <dt-bindings/media/tda1997x.h>
50#include <dt-bindings/sound/fsl-imx-audmux.h>
51
52/ {
53 /* these are used by bootloader for disabling nodes */
54 aliases {
55 led0 = &led0;
56 nand = &gpmi;
57 ssi0 = &ssi1;
58 usb0 = &usbh1;
59 usb1 = &usbotg;
60 };
61
62 chosen {
63 bootargs = "console=ttymxc1,115200";
64 };
65
66 leds {
67 compatible = "gpio-leds";
68 pinctrl-names = "default";
69 pinctrl-0 = <&pinctrl_gpio_leds>;
70
71 led0: user1 {
72 label = "user1";
73 gpios = <&gpio4 7 GPIO_ACTIVE_LOW>;
74 default-state = "on";
75 linux,default-trigger = "heartbeat";
76 };
77 };
78
79 memory@10000000 {
80 device_type = "memory";
81 reg = <0x10000000 0x20000000>;
82 };
83
84 reg_5p0v: regulator-5p0v {
85 compatible = "regulator-fixed";
86 regulator-name = "5P0V";
87 regulator-min-microvolt = <5000000>;
88 regulator-max-microvolt = <5000000>;
89 };
90
91 reg_usb_h1_vbus: regulator-usb-h1-vbus {
92 compatible = "regulator-fixed";
93 regulator-name = "usb_h1_vbus";
94 regulator-min-microvolt = <5000000>;
95 regulator-max-microvolt = <5000000>;
96 };
97
98 reg_usb_otg_vbus: regulator-usb-otg-vbus {
99 compatible = "regulator-fixed";
100 regulator-name = "usb_otg_vbus";
101 regulator-min-microvolt = <5000000>;
102 regulator-max-microvolt = <5000000>;
103 };
104
105 sound-digital {
106 compatible = "simple-audio-card";
107 simple-audio-card,name = "tda1997x-audio";
108
109 simple-audio-card,dai-link@0 {
110 format = "i2s";
111
112 cpu {
113 sound-dai = <&ssi2>;
114 };
115
116 codec {
117 bitclock-master;
118 frame-master;
119 sound-dai = <&hdmi_receiver>;
120 };
121 };
122 };
123};
124
125&audmux {
126 pinctrl-names = "default";
127 pinctrl-0 = <&pinctrl_audmux>; /* AUD5<->tda1997x */
128 status = "okay";
129
130 ssi1 {
131 fsl,audmux-port = <0>;
132 fsl,port-config = <
133 (IMX_AUDMUX_V2_PTCR_TFSDIR |
134 IMX_AUDMUX_V2_PTCR_TFSEL(4+8) | /* RXFS */
135 IMX_AUDMUX_V2_PTCR_TCLKDIR |
136 IMX_AUDMUX_V2_PTCR_TCSEL(4+8) | /* RXC */
137 IMX_AUDMUX_V2_PTCR_SYN)
138 IMX_AUDMUX_V2_PDCR_RXDSEL(4)
139 >;
140 };
141
142 aud5 {
143 fsl,audmux-port = <4>;
144 fsl,port-config = <
145 IMX_AUDMUX_V2_PTCR_SYN
146 IMX_AUDMUX_V2_PDCR_RXDSEL(0)>;
147 };
148};
149
150&can1 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&pinctrl_flexcan1>;
153 status = "okay";
154};
155
156&gpmi {
157 pinctrl-names = "default";
158 pinctrl-0 = <&pinctrl_gpmi_nand>;
159 status = "okay";
160};
161
162&hdmi {
163 ddc-i2c-bus = <&i2c3>;
164 status = "okay";
165};
166
167&i2c1 {
168 clock-frequency = <100000>;
169 pinctrl-names = "default";
170 pinctrl-0 = <&pinctrl_i2c1>;
171 status = "okay";
172
173 eeprom1: eeprom@50 {
174 compatible = "atmel,24c02";
175 reg = <0x50>;
176 pagesize = <16>;
177 };
178
179 eeprom2: eeprom@51 {
180 compatible = "atmel,24c02";
181 reg = <0x51>;
182 pagesize = <16>;
183 };
184
185 eeprom3: eeprom@52 {
186 compatible = "atmel,24c02";
187 reg = <0x52>;
188 pagesize = <16>;
189 };
190
191 eeprom4: eeprom@53 {
192 compatible = "atmel,24c02";
193 reg = <0x53>;
194 pagesize = <16>;
195 };
196
197 gpio: pca9555@23 {
198 compatible = "nxp,pca9555";
199 reg = <0x23>;
200 gpio-controller;
201 #gpio-cells = <2>;
202 };
203
204 rtc: ds1672@68 {
205 compatible = "dallas,ds1672";
206 reg = <0x68>;
207 };
208};
209
210&i2c2 {
211 clock-frequency = <100000>;
212 pinctrl-names = "default";
213 pinctrl-0 = <&pinctrl_i2c2>;
214 status = "okay";
215
216 ltc3676: pmic@3c {
217 compatible = "lltc,ltc3676";
218 reg = <0x3c>;
219 pinctrl-names = "default";
220 pinctrl-0 = <&pinctrl_pmic>;
221 interrupt-parent = <&gpio1>;
222 interrupts = <8 IRQ_TYPE_EDGE_FALLING>;
223
224 regulators {
225 /* VDD_SOC (1+R1/R2 = 1.635) */
226 reg_vdd_soc: sw1 {
227 regulator-name = "vddsoc";
228 regulator-min-microvolt = <674400>;
229 regulator-max-microvolt = <1308000>;
230 lltc,fb-voltage-divider = <127000 200000>;
231 regulator-ramp-delay = <7000>;
232 regulator-boot-on;
233 regulator-always-on;
234 };
235
236 /* VDD_DDR (1+R1/R2 = 2.105) */
237 reg_vdd_ddr: sw2 {
238 regulator-name = "vddddr";
239 regulator-min-microvolt = <868310>;
240 regulator-max-microvolt = <1684000>;
241 lltc,fb-voltage-divider = <221000 200000>;
242 regulator-ramp-delay = <7000>;
243 regulator-boot-on;
244 regulator-always-on;
245 };
246
247 /* VDD_ARM (1+R1/R2 = 1.635) */
248 reg_vdd_arm: sw3 {
249 regulator-name = "vddarm";
250 regulator-min-microvolt = <674400>;
251 regulator-max-microvolt = <1308000>;
252 lltc,fb-voltage-divider = <127000 200000>;
253 regulator-ramp-delay = <7000>;
254 regulator-boot-on;
255 regulator-always-on;
256 };
257
258 /* VDD_3P3 (1+R1/R2 = 1.281) */
259 reg_3p3: sw4 {
260 regulator-name = "vdd3p3";
261 regulator-min-microvolt = <1880000>;
262 regulator-max-microvolt = <3647000>;
263 lltc,fb-voltage-divider = <200000 56200>;
264 regulator-ramp-delay = <7000>;
265 regulator-boot-on;
266 regulator-always-on;
267 };
268
269 /* VDD_1P8a (1+R1/R2 = 2.505): HDMI In core */
270 reg_1p8a: ldo2 {
271 regulator-name = "vdd1p8a";
272 regulator-min-microvolt = <1816125>;
273 regulator-max-microvolt = <1816125>;
274 lltc,fb-voltage-divider = <301000 200000>;
275 regulator-boot-on;
276 regulator-always-on;
277 };
278
279 /* VDD_1P8b: HDMI In analog */
280 reg_1p8b: ldo3 {
281 regulator-name = "vdd1p8b";
282 regulator-min-microvolt = <1800000>;
283 regulator-max-microvolt = <1800000>;
284 regulator-boot-on;
285 };
286
287 /* VDD_HIGH (1+R1/R2 = 4.17) */
288 reg_3p0: ldo4 {
289 regulator-name = "vdd3p0";
290 regulator-min-microvolt = <3023250>;
291 regulator-max-microvolt = <3023250>;
292 lltc,fb-voltage-divider = <634000 200000>;
293 regulator-boot-on;
294 regulator-always-on;
295 };
296 };
297 };
298};
299
300&i2c3 {
301 clock-frequency = <100000>;
302 pinctrl-names = "default";
303 pinctrl-0 = <&pinctrl_i2c3>;
304 status = "okay";
305
306 gpio_exp: pca9555@24 {
307 compatible = "nxp,pca9555";
308 reg = <0x24>;
309 gpio-controller;
310 #gpio-cells = <2>;
311 };
312
313 hdmi_receiver: hdmi-receiver@48 {
314 compatible = "nxp,tda19971";
315 pinctrl-names = "default";
316 pinctrl-0 = <&pinctrl_tda1997x>;
317 reg = <0x48>;
318 interrupt-parent = <&gpio1>;
319 interrupts = <7 IRQ_TYPE_LEVEL_LOW>;
320 DOVDD-supply = <®_3p3>;
321 AVDD-supply = <®_1p8b>;
322 DVDD-supply = <®_1p8a>;
323 #sound-dai-cells = <0>;
324 nxp,audout-format = "i2s";
325 nxp,audout-layout = <0>;
326 nxp,audout-width = <16>;
327 nxp,audout-mclk-fs = <128>;
328 /*
329 * The 8bpp YUV422 semi-planar mode outputs CbCr[11:4]
330 * and Y[11:4] across 16bits in the same cycle
331 * which we map to VP[15:08]<->CSI_DATA[19:12]
332 */
333 nxp,vidout-portcfg =
334 /*G_Y_11_8<->VP[15:12]<->CSI_DATA[19:16]*/
335 < TDA1997X_VP24_V15_12 TDA1997X_G_Y_11_8 >,
336 /*G_Y_7_4<->VP[11:08]<->CSI_DATA[15:12]*/
337 < TDA1997X_VP24_V11_08 TDA1997X_G_Y_7_4 >,
338 /*R_CR_CBCR_11_8<->VP[07:04]<->CSI_DATA[11:08]*/
339 < TDA1997X_VP24_V07_04 TDA1997X_R_CR_CBCR_11_8 >,
340 /*R_CR_CBCR_7_4<->VP[03:00]<->CSI_DATA[07:04]*/
341 < TDA1997X_VP24_V03_00 TDA1997X_R_CR_CBCR_7_4 >;
342
343 port {
344 tda1997x_to_ipu1_csi0_mux: endpoint {
345 remote-endpoint = <&ipu1_csi0_mux_from_parallel_sensor>;
346 bus-width = <16>;
347 hsync-active = <1>;
348 vsync-active = <1>;
349 data-active = <1>;
350 };
351 };
352 };
353};
354
355&ipu1_csi0_from_ipu1_csi0_mux {
356 bus-width = <16>;
357};
358
359&ipu1_csi0_mux_from_parallel_sensor {
360 remote-endpoint = <&tda1997x_to_ipu1_csi0_mux>;
361 bus-width = <16>;
362};
363
364&ipu1_csi0 {
365 pinctrl-names = "default";
366 pinctrl-0 = <&pinctrl_ipu1_csi0>;
367};
368
369&pcie {
370 pinctrl-names = "default";
371 pinctrl-0 = <&pinctrl_pcie>;
372 reset-gpio = <&gpio1 0 GPIO_ACTIVE_LOW>;
373 status = "okay";
374};
375
376&pwm2 {
377 pinctrl-names = "default";
378 pinctrl-0 = <&pinctrl_pwm2>; /* MX6_DIO1 */
379 status = "disabled";
380};
381
382&pwm3 {
383 pinctrl-names = "default";
384 pinctrl-0 = <&pinctrl_pwm3>; /* MX6_DIO2 */
385 status = "disabled";
386};
387
388&ssi1 {
389 status = "okay";
390};
391
392&uart2 {
393 pinctrl-names = "default";
394 pinctrl-0 = <&pinctrl_uart2>;
395 status = "okay";
396};
397
398&uart3 {
399 pinctrl-names = "default";
400 pinctrl-0 = <&pinctrl_uart3>;
401 status = "okay";
402};
403
404&usbotg {
405 vbus-supply = <®_usb_otg_vbus>;
406 pinctrl-names = "default";
407 pinctrl-0 = <&pinctrl_usbotg>;
408 disable-over-current;
409 status = "okay";
410};
411
412&usbh1 {
413 vbus-supply = <®_usb_h1_vbus>;
414 status = "okay";
415};
416
417&wdog1 {
418 pinctrl-names = "default";
419 pinctrl-0 = <&pinctrl_wdog>;
420 fsl,ext-reset-output;
421};
422
423&iomuxc {
424 pinctrl_audmux: audmuxgrp {
425 fsl,pins = <
426 MX6QDL_PAD_DISP0_DAT19__AUD5_RXD 0x130b0
427 MX6QDL_PAD_DISP0_DAT14__AUD5_RXC 0x130b0
428 MX6QDL_PAD_DISP0_DAT13__AUD5_RXFS 0x130b0
429 >;
430 };
431
432 pinctrl_flexcan1: flexcan1grp {
433 fsl,pins = <
434 MX6QDL_PAD_KEY_ROW2__FLEXCAN1_RX 0x1b0b1
435 MX6QDL_PAD_KEY_COL2__FLEXCAN1_TX 0x1b0b1
436 MX6QDL_PAD_GPIO_9__GPIO1_IO09 0x4001b0b0 /* CAN_STBY */
437 >;
438 };
439
440 pinctrl_gpio_leds: gpioledsgrp {
441 fsl,pins = <
442 MX6QDL_PAD_KEY_ROW0__GPIO4_IO07 0x1b0b0
443 >;
444 };
445
446 pinctrl_gpmi_nand: gpminandgrp {
447 fsl,pins = <
448 MX6QDL_PAD_NANDF_CLE__NAND_CLE 0xb0b1
449 MX6QDL_PAD_NANDF_ALE__NAND_ALE 0xb0b1
450 MX6QDL_PAD_NANDF_WP_B__NAND_WP_B 0xb0b1
451 MX6QDL_PAD_NANDF_RB0__NAND_READY_B 0xb000
452 MX6QDL_PAD_NANDF_CS0__NAND_CE0_B 0xb0b1
453 MX6QDL_PAD_SD4_CMD__NAND_RE_B 0xb0b1
454 MX6QDL_PAD_SD4_CLK__NAND_WE_B 0xb0b1
455 MX6QDL_PAD_NANDF_D0__NAND_DATA00 0xb0b1
456 MX6QDL_PAD_NANDF_D1__NAND_DATA01 0xb0b1
457 MX6QDL_PAD_NANDF_D2__NAND_DATA02 0xb0b1
458 MX6QDL_PAD_NANDF_D3__NAND_DATA03 0xb0b1
459 MX6QDL_PAD_NANDF_D4__NAND_DATA04 0xb0b1
460 MX6QDL_PAD_NANDF_D5__NAND_DATA05 0xb0b1
461 MX6QDL_PAD_NANDF_D6__NAND_DATA06 0xb0b1
462 MX6QDL_PAD_NANDF_D7__NAND_DATA07 0xb0b1
463 >;
464 };
465
466 pinctrl_i2c1: i2c1grp {
467 fsl,pins = <
468 MX6QDL_PAD_EIM_D21__I2C1_SCL 0x4001b8b1
469 MX6QDL_PAD_EIM_D28__I2C1_SDA 0x4001b8b1
470 >;
471 };
472
473 pinctrl_i2c2: i2c2grp {
474 fsl,pins = <
475 MX6QDL_PAD_KEY_COL3__I2C2_SCL 0x4001b8b1
476 MX6QDL_PAD_KEY_ROW3__I2C2_SDA 0x4001b8b1
477 >;
478 };
479
480 pinctrl_i2c3: i2c3grp {
481 fsl,pins = <
482 MX6QDL_PAD_GPIO_3__I2C3_SCL 0x4001b8b1
483 MX6QDL_PAD_GPIO_6__I2C3_SDA 0x4001b8b1
484 >;
485 };
486
487 pinctrl_ipu1_csi0: ipu1_csi0grp {
488 fsl,pins = <
489 MX6QDL_PAD_CSI0_DAT4__IPU1_CSI0_DATA04 0x1b0b0
490 MX6QDL_PAD_CSI0_DAT5__IPU1_CSI0_DATA05 0x1b0b0
491 MX6QDL_PAD_CSI0_DAT6__IPU1_CSI0_DATA06 0x1b0b0
492 MX6QDL_PAD_CSI0_DAT7__IPU1_CSI0_DATA07 0x1b0b0
493 MX6QDL_PAD_CSI0_DAT8__IPU1_CSI0_DATA08 0x1b0b0
494 MX6QDL_PAD_CSI0_DAT9__IPU1_CSI0_DATA09 0x1b0b0
495 MX6QDL_PAD_CSI0_DAT10__IPU1_CSI0_DATA10 0x1b0b0
496 MX6QDL_PAD_CSI0_DAT11__IPU1_CSI0_DATA11 0x1b0b0
497 MX6QDL_PAD_CSI0_DAT12__IPU1_CSI0_DATA12 0x1b0b0
498 MX6QDL_PAD_CSI0_DAT13__IPU1_CSI0_DATA13 0x1b0b0
499 MX6QDL_PAD_CSI0_DAT14__IPU1_CSI0_DATA14 0x1b0b0
500 MX6QDL_PAD_CSI0_DAT15__IPU1_CSI0_DATA15 0x1b0b0
501 MX6QDL_PAD_CSI0_DAT16__IPU1_CSI0_DATA16 0x1b0b0
502 MX6QDL_PAD_CSI0_DAT17__IPU1_CSI0_DATA17 0x1b0b0
503 MX6QDL_PAD_CSI0_DAT18__IPU1_CSI0_DATA18 0x1b0b0
504 MX6QDL_PAD_CSI0_DAT19__IPU1_CSI0_DATA19 0x1b0b0
505 MX6QDL_PAD_CSI0_MCLK__IPU1_CSI0_HSYNC 0x1b0b0
506 MX6QDL_PAD_CSI0_PIXCLK__IPU1_CSI0_PIXCLK 0x1b0b0
507 MX6QDL_PAD_CSI0_VSYNC__IPU1_CSI0_VSYNC 0x1b0b0
508 >;
509 };
510
511 pinctrl_pcie: pciegrp {
512 fsl,pins = <
513 MX6QDL_PAD_GPIO_0__GPIO1_IO00 0x1b0b0 /* PCIE RST */
514 >;
515 };
516
517 pinctrl_pmic: pmicgrp {
518 fsl,pins = <
519 MX6QDL_PAD_GPIO_8__GPIO1_IO08 0x0001b0b0 /* PMIC_IRQ# */
520 >;
521 };
522
523 pinctrl_pwm2: pwm2grp {
524 fsl,pins = <
525 MX6QDL_PAD_SD1_DAT2__PWM2_OUT 0x1b0b1
526 >;
527 };
528
529 pinctrl_pwm3: pwm3grp {
530 fsl,pins = <
531 MX6QDL_PAD_SD1_DAT1__PWM3_OUT 0x1b0b1
532 >;
533 };
534
535 pinctrl_tda1997x: tda1997xgrp {
536 fsl,pins = <
537 MX6QDL_PAD_GPIO_7__GPIO1_IO07 0x1b0b0
538 >;
539 };
540
541 pinctrl_uart2: uart2grp {
542 fsl,pins = <
543 MX6QDL_PAD_SD4_DAT7__UART2_TX_DATA 0x1b0b1
544 MX6QDL_PAD_SD4_DAT4__UART2_RX_DATA 0x1b0b1
545 >;
546 };
547
548 pinctrl_uart3: uart3grp {
549 fsl,pins = <
550 MX6QDL_PAD_EIM_D24__UART3_TX_DATA 0x1b0b1
551 MX6QDL_PAD_EIM_D25__UART3_RX_DATA 0x1b0b1
552 >;
553 };
554
555 pinctrl_usbotg: usbotggrp {
556 fsl,pins = <
557 MX6QDL_PAD_GPIO_1__USB_OTG_ID 0x17059
558 >;
559 };
560
561 pinctrl_wdog: wdoggrp {
562 fsl,pins = <
563 MX6QDL_PAD_DISP0_DAT8__WDOG1_B 0x1b0b0
564 >;
565 };
566};