Loading...
1/*
2 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
3 *
4 * This program is free software; you can redistribute it and/or modify
5 * it under the terms of the GNU General Public License version 2 as
6 * published by the Free Software Foundation.
7 */
8/dts-v1/;
9
10#include "dra72x.dtsi"
11#include <dt-bindings/gpio/gpio.h>
12#include <dt-bindings/clk/ti-dra7-atl.h>
13
14/ {
15 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
16
17 aliases {
18 display0 = &hdmi0;
19 };
20
21 chosen {
22 stdout-path = &uart1;
23 };
24
25 evm_12v0: fixedregulator-evm12v0 {
26 /* main supply */
27 compatible = "regulator-fixed";
28 regulator-name = "evm_12v0";
29 regulator-min-microvolt = <12000000>;
30 regulator-max-microvolt = <12000000>;
31 regulator-always-on;
32 regulator-boot-on;
33 };
34
35 evm_5v0: fixedregulator-evm5v0 {
36 /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
37 /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
38 compatible = "regulator-fixed";
39 regulator-name = "evm_5v0";
40 regulator-min-microvolt = <5000000>;
41 regulator-max-microvolt = <5000000>;
42 vin-supply = <&evm_12v0>;
43 regulator-always-on;
44 regulator-boot-on;
45 };
46
47 vsys_3v3: fixedregulator-vsys3v3 {
48 /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
49 /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
50 compatible = "regulator-fixed";
51 regulator-name = "vsys_3v3";
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 vin-supply = <&evm_12v0>;
55 regulator-always-on;
56 regulator-boot-on;
57 };
58
59 evm_3v3_sw: fixedregulator-evm_3v3 {
60 /* TPS22965DSG */
61 compatible = "regulator-fixed";
62 regulator-name = "evm_3v3";
63 regulator-min-microvolt = <3300000>;
64 regulator-max-microvolt = <3300000>;
65 vin-supply = <&vsys_3v3>;
66 regulator-always-on;
67 regulator-boot-on;
68 };
69
70 aic_dvdd: fixedregulator-aic_dvdd {
71 /* TPS77018DBVT */
72 compatible = "regulator-fixed";
73 regulator-name = "aic_dvdd";
74 vin-supply = <&evm_3v3_sw>;
75 regulator-min-microvolt = <1800000>;
76 regulator-max-microvolt = <1800000>;
77 };
78
79 evm_3v3_sd: fixedregulator-sd {
80 compatible = "regulator-fixed";
81 regulator-name = "evm_3v3_sd";
82 regulator-min-microvolt = <3300000>;
83 regulator-max-microvolt = <3300000>;
84 vin-supply = <&evm_3v3_sw>;
85 enable-active-high;
86 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
87 };
88
89 extcon_usb1: extcon_usb1 {
90 compatible = "linux,extcon-usb-gpio";
91 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
92 };
93
94 extcon_usb2: extcon_usb2 {
95 compatible = "linux,extcon-usb-gpio";
96 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
97 };
98
99 hdmi0: connector {
100 compatible = "hdmi-connector";
101 label = "hdmi";
102
103 type = "a";
104
105 port {
106 hdmi_connector_in: endpoint {
107 remote-endpoint = <&tpd12s015_out>;
108 };
109 };
110 };
111
112 tpd12s015: encoder {
113 compatible = "ti,tpd12s015";
114
115 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
116 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
117 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
118
119 ports {
120 #address-cells = <1>;
121 #size-cells = <0>;
122
123 port@0 {
124 reg = <0>;
125
126 tpd12s015_in: endpoint {
127 remote-endpoint = <&hdmi_out>;
128 };
129 };
130
131 port@1 {
132 reg = <1>;
133
134 tpd12s015_out: endpoint {
135 remote-endpoint = <&hdmi_connector_in>;
136 };
137 };
138 };
139 };
140
141 sound0: sound0 {
142 compatible = "simple-audio-card";
143 simple-audio-card,name = "DRA7xx-EVM";
144 simple-audio-card,widgets =
145 "Headphone", "Headphone Jack",
146 "Line", "Line Out",
147 "Microphone", "Mic Jack",
148 "Line", "Line In";
149 simple-audio-card,routing =
150 "Headphone Jack", "HPLOUT",
151 "Headphone Jack", "HPROUT",
152 "Line Out", "LLOUT",
153 "Line Out", "RLOUT",
154 "MIC3L", "Mic Jack",
155 "MIC3R", "Mic Jack",
156 "Mic Jack", "Mic Bias",
157 "LINE1L", "Line In",
158 "LINE1R", "Line In";
159 simple-audio-card,format = "dsp_b";
160 simple-audio-card,bitclock-master = <&sound0_master>;
161 simple-audio-card,frame-master = <&sound0_master>;
162 simple-audio-card,bitclock-inversion;
163
164 sound0_master: simple-audio-card,cpu {
165 sound-dai = <&mcasp3>;
166 system-clock-frequency = <5644800>;
167 };
168
169 simple-audio-card,codec {
170 sound-dai = <&tlv320aic3106>;
171 clocks = <&atl_clkin2_ck>;
172 };
173 };
174};
175
176&dra7_pmx_core {
177 mmc1_pins_default: mmc1_pins_default {
178 pinctrl-single,pins = <
179 DRA7XX_CORE_IOPAD(0x376c, PIN_INPUT | MUX_MODE14) /* mmc1sdcd.gpio219 */
180 DRA7XX_CORE_IOPAD(0x3754, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_clk.clk */
181 DRA7XX_CORE_IOPAD(0x3758, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_cmd.cmd */
182 DRA7XX_CORE_IOPAD(0x375c, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat0.dat0 */
183 DRA7XX_CORE_IOPAD(0x3760, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat1.dat1 */
184 DRA7XX_CORE_IOPAD(0x3764, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat2.dat2 */
185 DRA7XX_CORE_IOPAD(0x3768, PIN_INPUT_PULLUP | MUX_MODE0) /* mmc1_dat3.dat3 */
186 >;
187 };
188
189 mmc2_pins_default: mmc2_pins_default {
190 pinctrl-single,pins = <
191 DRA7XX_CORE_IOPAD(0x349c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a23.mmc2_clk */
192 DRA7XX_CORE_IOPAD(0x34b0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_cs1.mmc2_cmd */
193 DRA7XX_CORE_IOPAD(0x34a0, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a24.mmc2_dat0 */
194 DRA7XX_CORE_IOPAD(0x34a4, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a25.mmc2_dat1 */
195 DRA7XX_CORE_IOPAD(0x34a8, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a26.mmc2_dat2 */
196 DRA7XX_CORE_IOPAD(0x34ac, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a27.mmc2_dat3 */
197 DRA7XX_CORE_IOPAD(0x348c, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a19.mmc2_dat4 */
198 DRA7XX_CORE_IOPAD(0x3490, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a20.mmc2_dat5 */
199 DRA7XX_CORE_IOPAD(0x3494, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a21.mmc2_dat6 */
200 DRA7XX_CORE_IOPAD(0x3498, PIN_INPUT_PULLUP | MUX_MODE1) /* gpmc_a22.mmc2_dat7 */
201 >;
202 };
203
204 dcan1_pins_default: dcan1_pins_default {
205 pinctrl-single,pins = <
206 DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
207 DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
208 >;
209 };
210
211 dcan1_pins_sleep: dcan1_pins_sleep {
212 pinctrl-single,pins = <
213 DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
214 DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
215 >;
216 };
217};
218
219&i2c1 {
220 status = "okay";
221 clock-frequency = <400000>;
222
223 pcf_lcd: gpio@20 {
224 compatible = "nxp,pcf8575";
225 reg = <0x20>;
226 gpio-controller;
227 #gpio-cells = <2>;
228 interrupt-controller;
229 #interrupt-cells = <2>;
230 };
231
232 pcf_gpio_21: gpio@21 {
233 compatible = "ti,pcf8575", "nxp,pcf8575";
234 reg = <0x21>;
235 lines-initial-states = <0x1408>;
236 gpio-controller;
237 #gpio-cells = <2>;
238 interrupt-controller;
239 #interrupt-cells = <2>;
240 };
241
242 tlv320aic3106: tlv320aic3106@19 {
243 #sound-dai-cells = <0>;
244 compatible = "ti,tlv320aic3106";
245 reg = <0x19>;
246 adc-settle-ms = <40>;
247 ai3x-micbias-vg = <1>; /* 2.0V */
248 status = "okay";
249
250 /* Regulators */
251 AVDD-supply = <&evm_3v3_sw>;
252 IOVDD-supply = <&evm_3v3_sw>;
253 DRVDD-supply = <&evm_3v3_sw>;
254 DVDD-supply = <&aic_dvdd>;
255 };
256};
257
258&i2c5 {
259 status = "okay";
260 clock-frequency = <400000>;
261
262 pcf_hdmi: pcf8575@26 {
263 compatible = "ti,pcf8575", "nxp,pcf8575";
264 reg = <0x26>;
265 gpio-controller;
266 #gpio-cells = <2>;
267 /*
268 * initial state is used here to keep the mdio interface
269 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
270 * VIN2_S0 driven high otherwise Ethernet stops working
271 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
272 */
273 lines-initial-states = <0x0f2b>;
274
275 p1 {
276 /* vin6_sel_s0: high: VIN6, low: audio */
277 gpio-hog;
278 gpios = <1 GPIO_ACTIVE_HIGH>;
279 output-low;
280 line-name = "vin6_sel_s0";
281 };
282 };
283};
284
285&uart1 {
286 status = "okay";
287 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
288 <&dra7_pmx_core 0x3e0>;
289};
290
291&elm {
292 status = "okay";
293};
294
295&gpmc {
296 /*
297 * For the existing IOdelay configuration via U-Boot we don't
298 * support NAND on dra72-evm. Keep it disabled. Enabling it
299 * requires a different configuration by U-Boot.
300 */
301 status = "disabled";
302 ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
303 nand@0,0 {
304 /* To use NAND, DIP switch SW5 must be set like so:
305 * SW5.1 (NAND_SELn) = ON (LOW)
306 * SW5.9 (GPMC_WPN) = OFF (HIGH)
307 */
308 compatible = "ti,omap2-nand";
309 reg = <0 0 4>; /* device IO registers */
310 interrupt-parent = <&gpmc>;
311 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
312 <1 IRQ_TYPE_NONE>; /* termcount */
313 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
314 ti,nand-xfer-type = "prefetch-dma";
315 ti,nand-ecc-opt = "bch8";
316 ti,elm-id = <&elm>;
317 nand-bus-width = <16>;
318 gpmc,device-width = <2>;
319 gpmc,sync-clk-ps = <0>;
320 gpmc,cs-on-ns = <0>;
321 gpmc,cs-rd-off-ns = <80>;
322 gpmc,cs-wr-off-ns = <80>;
323 gpmc,adv-on-ns = <0>;
324 gpmc,adv-rd-off-ns = <60>;
325 gpmc,adv-wr-off-ns = <60>;
326 gpmc,we-on-ns = <10>;
327 gpmc,we-off-ns = <50>;
328 gpmc,oe-on-ns = <4>;
329 gpmc,oe-off-ns = <40>;
330 gpmc,access-ns = <40>;
331 gpmc,wr-access-ns = <80>;
332 gpmc,rd-cycle-ns = <80>;
333 gpmc,wr-cycle-ns = <80>;
334 gpmc,bus-turnaround-ns = <0>;
335 gpmc,cycle2cycle-delay-ns = <0>;
336 gpmc,clk-activation-ns = <0>;
337 gpmc,wr-data-mux-bus-ns = <0>;
338 /* MTD partition table */
339 /* All SPL-* partitions are sized to minimal length
340 * which can be independently programmable. For
341 * NAND flash this is equal to size of erase-block */
342 #address-cells = <1>;
343 #size-cells = <1>;
344 partition@0 {
345 label = "NAND.SPL";
346 reg = <0x00000000 0x000020000>;
347 };
348 partition@1 {
349 label = "NAND.SPL.backup1";
350 reg = <0x00020000 0x00020000>;
351 };
352 partition@2 {
353 label = "NAND.SPL.backup2";
354 reg = <0x00040000 0x00020000>;
355 };
356 partition@3 {
357 label = "NAND.SPL.backup3";
358 reg = <0x00060000 0x00020000>;
359 };
360 partition@4 {
361 label = "NAND.u-boot-spl-os";
362 reg = <0x00080000 0x00040000>;
363 };
364 partition@5 {
365 label = "NAND.u-boot";
366 reg = <0x000c0000 0x00100000>;
367 };
368 partition@6 {
369 label = "NAND.u-boot-env";
370 reg = <0x001c0000 0x00020000>;
371 };
372 partition@7 {
373 label = "NAND.u-boot-env.backup1";
374 reg = <0x001e0000 0x00020000>;
375 };
376 partition@8 {
377 label = "NAND.kernel";
378 reg = <0x00200000 0x00800000>;
379 };
380 partition@9 {
381 label = "NAND.file-system";
382 reg = <0x00a00000 0x0f600000>;
383 };
384 };
385};
386
387&omap_dwc3_1 {
388 extcon = <&extcon_usb1>;
389};
390
391&omap_dwc3_2 {
392 extcon = <&extcon_usb2>;
393};
394
395&usb1 {
396 dr_mode = "otg";
397 extcon = <&extcon_usb1>;
398};
399
400&usb2 {
401 dr_mode = "host";
402};
403
404&mmc1 {
405 status = "okay";
406 pinctrl-names = "default";
407 pinctrl-0 = <&mmc1_pins_default>;
408 vmmc-supply = <&evm_3v3_sd>;
409 bus-width = <4>;
410 /*
411 * SDCD signal is not being used here - using the fact that GPIO mode
412 * is a viable alternative
413 */
414 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
415 max-frequency = <192000000>;
416};
417
418&mmc2 {
419 /* SW5-3 in ON position */
420 status = "okay";
421 pinctrl-names = "default";
422 pinctrl-0 = <&mmc2_pins_default>;
423 bus-width = <8>;
424 ti,non-removable;
425 max-frequency = <192000000>;
426};
427
428&mac {
429 status = "okay";
430};
431
432&dcan1 {
433 status = "ok";
434 pinctrl-names = "default", "sleep", "active";
435 pinctrl-0 = <&dcan1_pins_sleep>;
436 pinctrl-1 = <&dcan1_pins_sleep>;
437 pinctrl-2 = <&dcan1_pins_default>;
438};
439
440&qspi {
441 status = "okay";
442
443 spi-max-frequency = <76800000>;
444 m25p80@0 {
445 compatible = "s25fl256s1";
446 spi-max-frequency = <76800000>;
447 reg = <0>;
448 spi-tx-bus-width = <1>;
449 spi-rx-bus-width = <4>;
450 #address-cells = <1>;
451 #size-cells = <1>;
452
453 /* MTD partition table.
454 * The ROM checks the first four physical blocks
455 * for a valid file to boot and the flash here is
456 * 64KiB block size.
457 */
458 partition@0 {
459 label = "QSPI.SPL";
460 reg = <0x00000000 0x000010000>;
461 };
462 partition@1 {
463 label = "QSPI.SPL.backup1";
464 reg = <0x00010000 0x00010000>;
465 };
466 partition@2 {
467 label = "QSPI.SPL.backup2";
468 reg = <0x00020000 0x00010000>;
469 };
470 partition@3 {
471 label = "QSPI.SPL.backup3";
472 reg = <0x00030000 0x00010000>;
473 };
474 partition@4 {
475 label = "QSPI.u-boot";
476 reg = <0x00040000 0x00100000>;
477 };
478 partition@5 {
479 label = "QSPI.u-boot-spl-os";
480 reg = <0x00140000 0x00080000>;
481 };
482 partition@6 {
483 label = "QSPI.u-boot-env";
484 reg = <0x001c0000 0x00010000>;
485 };
486 partition@7 {
487 label = "QSPI.u-boot-env.backup1";
488 reg = <0x001d0000 0x0010000>;
489 };
490 partition@8 {
491 label = "QSPI.kernel";
492 reg = <0x001e0000 0x0800000>;
493 };
494 partition@9 {
495 label = "QSPI.file-system";
496 reg = <0x009e0000 0x01620000>;
497 };
498 };
499};
500
501&dss {
502 status = "ok";
503};
504
505&hdmi {
506 status = "ok";
507
508 port {
509 hdmi_out: endpoint {
510 remote-endpoint = <&tpd12s015_in>;
511 };
512 };
513};
514
515&atl {
516 assigned-clocks = <&abe_dpll_sys_clk_mux>,
517 <&atl_clkctrl DRA7_ATL_CLKCTRL 26>,
518 <&dpll_abe_ck>,
519 <&dpll_abe_m2x2_ck>,
520 <&atl_clkin2_ck>;
521 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
522 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
523
524 status = "okay";
525
526 atl2 {
527 bws = <DRA7_ATL_WS_MCASP2_FSX>;
528 aws = <DRA7_ATL_WS_MCASP3_FSX>;
529 };
530};
531
532&mcasp3 {
533 #sound-dai-cells = <0>;
534
535 assigned-clocks = <&l4per_clkctrl DRA7_MCASP3_CLKCTRL 24>;
536 assigned-clock-parents = <&atl_clkin2_ck>;
537
538 status = "okay";
539
540 op-mode = <0>; /* MCASP_IIS_MODE */
541 tdm-slots = <2>;
542 /* 4 serializer */
543 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
544 1 2 0 0
545 >;
546 tx-num-evt = <32>;
547 rx-num-evt = <32>;
548};
549
550&mailbox5 {
551 status = "okay";
552 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
553 status = "okay";
554 };
555 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
556 status = "okay";
557 };
558};
559
560&mailbox6 {
561 status = "okay";
562 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
563 status = "okay";
564 };
565};
566
567&pcie1_rc {
568 status = "okay";
569};
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * Copyright (C) 2014-2016 Texas Instruments Incorporated - http://www.ti.com/
4 */
5/dts-v1/;
6
7#include "dra72x.dtsi"
8#include <dt-bindings/gpio/gpio.h>
9#include <dt-bindings/clk/ti-dra7-atl.h>
10
11/ {
12 compatible = "ti,dra72-evm", "ti,dra722", "ti,dra72", "ti,dra7";
13
14 aliases {
15 display0 = &hdmi0;
16 };
17
18 chosen {
19 stdout-path = &uart1;
20 };
21
22 evm_12v0: fixedregulator-evm12v0 {
23 /* main supply */
24 compatible = "regulator-fixed";
25 regulator-name = "evm_12v0";
26 regulator-min-microvolt = <12000000>;
27 regulator-max-microvolt = <12000000>;
28 regulator-always-on;
29 regulator-boot-on;
30 };
31
32 evm_5v0: fixedregulator-evm5v0 {
33 /* Output 1 of TPS43351QDAPRQ1 on dra72-evm */
34 /* Output 1 of LM5140QRWGTQ1 on dra71-evm */
35 compatible = "regulator-fixed";
36 regulator-name = "evm_5v0";
37 regulator-min-microvolt = <5000000>;
38 regulator-max-microvolt = <5000000>;
39 vin-supply = <&evm_12v0>;
40 regulator-always-on;
41 regulator-boot-on;
42 };
43
44 evm_3v6: fixedregulator-evm_3v6 {
45 compatible = "regulator-fixed";
46 regulator-name = "evm_3v6";
47 regulator-min-microvolt = <3600000>;
48 regulator-max-microvolt = <3600000>;
49 vin-supply = <&evm_5v0>;
50 regulator-always-on;
51 regulator-boot-on;
52 };
53
54 vsys_3v3: fixedregulator-vsys3v3 {
55 /* Output 2 of TPS43351QDAPRQ1 on dra72-evm */
56 /* Output 2 of LM5140QRWGTQ1 on dra71-evm */
57 compatible = "regulator-fixed";
58 regulator-name = "vsys_3v3";
59 regulator-min-microvolt = <3300000>;
60 regulator-max-microvolt = <3300000>;
61 vin-supply = <&evm_12v0>;
62 regulator-always-on;
63 regulator-boot-on;
64 };
65
66 evm_3v3_sw: fixedregulator-evm_3v3 {
67 /* TPS22965DSG */
68 compatible = "regulator-fixed";
69 regulator-name = "evm_3v3";
70 regulator-min-microvolt = <3300000>;
71 regulator-max-microvolt = <3300000>;
72 vin-supply = <&vsys_3v3>;
73 regulator-always-on;
74 regulator-boot-on;
75 };
76
77 aic_dvdd: fixedregulator-aic_dvdd {
78 /* TPS77018DBVT */
79 compatible = "regulator-fixed";
80 regulator-name = "aic_dvdd";
81 vin-supply = <&evm_3v3_sw>;
82 regulator-min-microvolt = <1800000>;
83 regulator-max-microvolt = <1800000>;
84 };
85
86 evm_3v3_sd: fixedregulator-sd {
87 compatible = "regulator-fixed";
88 regulator-name = "evm_3v3_sd";
89 regulator-min-microvolt = <3300000>;
90 regulator-max-microvolt = <3300000>;
91 vin-supply = <&evm_3v3_sw>;
92 enable-active-high;
93 gpio = <&pcf_gpio_21 5 GPIO_ACTIVE_HIGH>;
94 };
95
96 extcon_usb1: extcon_usb1 {
97 compatible = "linux,extcon-usb-gpio";
98 id-gpio = <&pcf_gpio_21 1 GPIO_ACTIVE_HIGH>;
99 };
100
101 extcon_usb2: extcon_usb2 {
102 compatible = "linux,extcon-usb-gpio";
103 id-gpio = <&pcf_gpio_21 2 GPIO_ACTIVE_HIGH>;
104 };
105
106 hdmi0: connector {
107 compatible = "hdmi-connector";
108 label = "hdmi";
109
110 type = "a";
111
112 port {
113 hdmi_connector_in: endpoint {
114 remote-endpoint = <&tpd12s015_out>;
115 };
116 };
117 };
118
119 tpd12s015: encoder {
120 compatible = "ti,tpd12s015";
121
122 gpios = <&pcf_hdmi 4 GPIO_ACTIVE_HIGH>, /* P4, CT CP HPD */
123 <&pcf_hdmi 5 GPIO_ACTIVE_HIGH>, /* P5, LS OE */
124 <&gpio7 12 GPIO_ACTIVE_HIGH>; /* gpio7_12/sp1_cs2, HPD */
125
126 ports {
127 #address-cells = <1>;
128 #size-cells = <0>;
129
130 port@0 {
131 reg = <0>;
132
133 tpd12s015_in: endpoint {
134 remote-endpoint = <&hdmi_out>;
135 };
136 };
137
138 port@1 {
139 reg = <1>;
140
141 tpd12s015_out: endpoint {
142 remote-endpoint = <&hdmi_connector_in>;
143 };
144 };
145 };
146 };
147
148 sound0: sound0 {
149 compatible = "simple-audio-card";
150 simple-audio-card,name = "DRA7xx-EVM";
151 simple-audio-card,widgets =
152 "Headphone", "Headphone Jack",
153 "Line", "Line Out",
154 "Microphone", "Mic Jack",
155 "Line", "Line In";
156 simple-audio-card,routing =
157 "Headphone Jack", "HPLOUT",
158 "Headphone Jack", "HPROUT",
159 "Line Out", "LLOUT",
160 "Line Out", "RLOUT",
161 "MIC3L", "Mic Jack",
162 "MIC3R", "Mic Jack",
163 "Mic Jack", "Mic Bias",
164 "LINE1L", "Line In",
165 "LINE1R", "Line In";
166 simple-audio-card,format = "dsp_b";
167 simple-audio-card,bitclock-master = <&sound0_master>;
168 simple-audio-card,frame-master = <&sound0_master>;
169 simple-audio-card,bitclock-inversion;
170
171 sound0_master: simple-audio-card,cpu {
172 sound-dai = <&mcasp3>;
173 system-clock-frequency = <5644800>;
174 };
175
176 simple-audio-card,codec {
177 sound-dai = <&tlv320aic3106>;
178 clocks = <&atl_clkin2_ck>;
179 };
180 };
181
182 vmmcwl_fixed: fixedregulator-mmcwl {
183 compatible = "regulator-fixed";
184 regulator-name = "vmmcwl_fixed";
185 regulator-min-microvolt = <1800000>;
186 regulator-max-microvolt = <1800000>;
187 gpio = <&gpio5 8 GPIO_ACTIVE_HIGH>;
188 enable-active-high;
189 };
190};
191
192&dra7_pmx_core {
193 dcan1_pins_default: dcan1_pins_default {
194 pinctrl-single,pins = <
195 DRA7XX_CORE_IOPAD(0x37d0, PIN_OUTPUT_PULLUP | MUX_MODE0) /* dcan1_tx */
196 DRA7XX_CORE_IOPAD(0x3818, PULL_UP | MUX_MODE1) /* wakeup0.dcan1_rx */
197 >;
198 };
199
200 dcan1_pins_sleep: dcan1_pins_sleep {
201 pinctrl-single,pins = <
202 DRA7XX_CORE_IOPAD(0x37d0, MUX_MODE15 | PULL_UP) /* dcan1_tx.off */
203 DRA7XX_CORE_IOPAD(0x3818, MUX_MODE15 | PULL_UP) /* wakeup0.off */
204 >;
205 };
206};
207
208&i2c1 {
209 status = "okay";
210 clock-frequency = <400000>;
211
212 pcf_lcd: gpio@20 {
213 compatible = "nxp,pcf8575";
214 reg = <0x20>;
215 gpio-controller;
216 #gpio-cells = <2>;
217 interrupt-controller;
218 #interrupt-cells = <2>;
219 };
220
221 pcf_gpio_21: gpio@21 {
222 compatible = "ti,pcf8575", "nxp,pcf8575";
223 reg = <0x21>;
224 lines-initial-states = <0x1408>;
225 gpio-controller;
226 #gpio-cells = <2>;
227 interrupt-controller;
228 #interrupt-cells = <2>;
229 };
230
231 tlv320aic3106: tlv320aic3106@19 {
232 #sound-dai-cells = <0>;
233 compatible = "ti,tlv320aic3106";
234 reg = <0x19>;
235 adc-settle-ms = <40>;
236 ai3x-micbias-vg = <1>; /* 2.0V */
237 status = "okay";
238
239 /* Regulators */
240 AVDD-supply = <&evm_3v3_sw>;
241 IOVDD-supply = <&evm_3v3_sw>;
242 DRVDD-supply = <&evm_3v3_sw>;
243 DVDD-supply = <&aic_dvdd>;
244 };
245};
246
247&i2c5 {
248 status = "okay";
249 clock-frequency = <400000>;
250
251 pcf_hdmi: pcf8575@26 {
252 compatible = "ti,pcf8575", "nxp,pcf8575";
253 reg = <0x26>;
254 gpio-controller;
255 #gpio-cells = <2>;
256 /*
257 * initial state is used here to keep the mdio interface
258 * selected on RU89 through SEL_VIN4_MUX_S0, VIN2_S1 and
259 * VIN2_S0 driven high otherwise Ethernet stops working
260 * VIN6_SEL_S0 is low, thus selecting McASP3 over VIN6
261 */
262 lines-initial-states = <0x0f2b>;
263
264 p1 {
265 /* vin6_sel_s0: high: VIN6, low: audio */
266 gpio-hog;
267 gpios = <1 GPIO_ACTIVE_HIGH>;
268 output-low;
269 line-name = "vin6_sel_s0";
270 };
271 };
272};
273
274&uart1 {
275 status = "okay";
276 interrupts-extended = <&crossbar_mpu GIC_SPI 67 IRQ_TYPE_LEVEL_HIGH>,
277 <&dra7_pmx_core 0x3e0>;
278};
279
280&elm {
281 status = "okay";
282};
283
284&gpmc {
285 /*
286 * For the existing IOdelay configuration via U-Boot we don't
287 * support NAND on dra72-evm. Keep it disabled. Enabling it
288 * requires a different configuration by U-Boot.
289 */
290 status = "disabled";
291 ranges = <0 0 0x08000000 0x01000000>; /* minimum GPMC partition = 16MB */
292 nand@0,0 {
293 /* To use NAND, DIP switch SW5 must be set like so:
294 * SW5.1 (NAND_SELn) = ON (LOW)
295 * SW5.9 (GPMC_WPN) = OFF (HIGH)
296 */
297 compatible = "ti,omap2-nand";
298 reg = <0 0 4>; /* device IO registers */
299 interrupt-parent = <&gpmc>;
300 interrupts = <0 IRQ_TYPE_NONE>, /* fifoevent */
301 <1 IRQ_TYPE_NONE>; /* termcount */
302 rb-gpios = <&gpmc 0 GPIO_ACTIVE_HIGH>; /* gpmc_wait0 pin */
303 ti,nand-xfer-type = "prefetch-dma";
304 ti,nand-ecc-opt = "bch8";
305 ti,elm-id = <&elm>;
306 nand-bus-width = <16>;
307 gpmc,device-width = <2>;
308 gpmc,sync-clk-ps = <0>;
309 gpmc,cs-on-ns = <0>;
310 gpmc,cs-rd-off-ns = <80>;
311 gpmc,cs-wr-off-ns = <80>;
312 gpmc,adv-on-ns = <0>;
313 gpmc,adv-rd-off-ns = <60>;
314 gpmc,adv-wr-off-ns = <60>;
315 gpmc,we-on-ns = <10>;
316 gpmc,we-off-ns = <50>;
317 gpmc,oe-on-ns = <4>;
318 gpmc,oe-off-ns = <40>;
319 gpmc,access-ns = <40>;
320 gpmc,wr-access-ns = <80>;
321 gpmc,rd-cycle-ns = <80>;
322 gpmc,wr-cycle-ns = <80>;
323 gpmc,bus-turnaround-ns = <0>;
324 gpmc,cycle2cycle-delay-ns = <0>;
325 gpmc,clk-activation-ns = <0>;
326 gpmc,wr-data-mux-bus-ns = <0>;
327 /* MTD partition table */
328 /* All SPL-* partitions are sized to minimal length
329 * which can be independently programmable. For
330 * NAND flash this is equal to size of erase-block */
331 #address-cells = <1>;
332 #size-cells = <1>;
333 partition@0 {
334 label = "NAND.SPL";
335 reg = <0x00000000 0x000020000>;
336 };
337 partition@1 {
338 label = "NAND.SPL.backup1";
339 reg = <0x00020000 0x00020000>;
340 };
341 partition@2 {
342 label = "NAND.SPL.backup2";
343 reg = <0x00040000 0x00020000>;
344 };
345 partition@3 {
346 label = "NAND.SPL.backup3";
347 reg = <0x00060000 0x00020000>;
348 };
349 partition@4 {
350 label = "NAND.u-boot-spl-os";
351 reg = <0x00080000 0x00040000>;
352 };
353 partition@5 {
354 label = "NAND.u-boot";
355 reg = <0x000c0000 0x00100000>;
356 };
357 partition@6 {
358 label = "NAND.u-boot-env";
359 reg = <0x001c0000 0x00020000>;
360 };
361 partition@7 {
362 label = "NAND.u-boot-env.backup1";
363 reg = <0x001e0000 0x00020000>;
364 };
365 partition@8 {
366 label = "NAND.kernel";
367 reg = <0x00200000 0x00800000>;
368 };
369 partition@9 {
370 label = "NAND.file-system";
371 reg = <0x00a00000 0x0f600000>;
372 };
373 };
374};
375
376&omap_dwc3_1 {
377 extcon = <&extcon_usb1>;
378};
379
380&omap_dwc3_2 {
381 extcon = <&extcon_usb2>;
382};
383
384&usb1 {
385 dr_mode = "otg";
386 extcon = <&extcon_usb1>;
387};
388
389&usb2 {
390 dr_mode = "host";
391 extcon = <&extcon_usb2>;
392};
393
394&mmc1 {
395 status = "okay";
396 pinctrl-names = "default";
397 pinctrl-0 = <&mmc1_pins_default>;
398 vmmc-supply = <&evm_3v3_sd>;
399 bus-width = <4>;
400 /*
401 * SDCD signal is not being used here - using the fact that GPIO mode
402 * is a viable alternative
403 */
404 cd-gpios = <&gpio6 27 GPIO_ACTIVE_LOW>;
405 max-frequency = <192000000>;
406};
407
408&mmc2 {
409 /* SW5-3 in ON position */
410 status = "okay";
411 pinctrl-names = "default";
412 pinctrl-0 = <&mmc2_pins_default>;
413 bus-width = <8>;
414 non-removable;
415 max-frequency = <192000000>;
416};
417
418&mmc4 {
419 status = "okay";
420 vmmc-supply = <&evm_3v6>;
421 vqmmc-supply = <&vmmcwl_fixed>;
422 bus-width = <4>;
423 cap-power-off-card;
424 keep-power-in-suspend;
425 non-removable;
426 pinctrl-names = "default", "hs", "sdr12", "sdr25";
427 pinctrl-0 = <&mmc4_pins_default>;
428 pinctrl-1 = <&mmc4_pins_default>;
429 pinctrl-2 = <&mmc4_pins_default>;
430 pinctrl-3 = <&mmc4_pins_default>;
431 #address-cells = <1>;
432 #size-cells = <0>;
433 wifi@2 {
434 compatible = "ti,wl1835";
435 reg = <2>;
436 interrupt-parent = <&gpio5>;
437 interrupts = <7 IRQ_TYPE_EDGE_RISING>;
438 };
439};
440
441&mac {
442 status = "okay";
443};
444
445&dcan1 {
446 status = "ok";
447 pinctrl-names = "default", "sleep", "active";
448 pinctrl-0 = <&dcan1_pins_sleep>;
449 pinctrl-1 = <&dcan1_pins_sleep>;
450 pinctrl-2 = <&dcan1_pins_default>;
451};
452
453&qspi {
454 status = "okay";
455
456 spi-max-frequency = <76800000>;
457 m25p80@0 {
458 compatible = "s25fl256s1";
459 spi-max-frequency = <76800000>;
460 reg = <0>;
461 spi-tx-bus-width = <1>;
462 spi-rx-bus-width = <4>;
463 #address-cells = <1>;
464 #size-cells = <1>;
465
466 /* MTD partition table.
467 * The ROM checks the first four physical blocks
468 * for a valid file to boot and the flash here is
469 * 64KiB block size.
470 */
471 partition@0 {
472 label = "QSPI.SPL";
473 reg = <0x00000000 0x000010000>;
474 };
475 partition@1 {
476 label = "QSPI.SPL.backup1";
477 reg = <0x00010000 0x00010000>;
478 };
479 partition@2 {
480 label = "QSPI.SPL.backup2";
481 reg = <0x00020000 0x00010000>;
482 };
483 partition@3 {
484 label = "QSPI.SPL.backup3";
485 reg = <0x00030000 0x00010000>;
486 };
487 partition@4 {
488 label = "QSPI.u-boot";
489 reg = <0x00040000 0x00100000>;
490 };
491 partition@5 {
492 label = "QSPI.u-boot-spl-os";
493 reg = <0x00140000 0x00080000>;
494 };
495 partition@6 {
496 label = "QSPI.u-boot-env";
497 reg = <0x001c0000 0x00010000>;
498 };
499 partition@7 {
500 label = "QSPI.u-boot-env.backup1";
501 reg = <0x001d0000 0x0010000>;
502 };
503 partition@8 {
504 label = "QSPI.kernel";
505 reg = <0x001e0000 0x0800000>;
506 };
507 partition@9 {
508 label = "QSPI.file-system";
509 reg = <0x009e0000 0x01620000>;
510 };
511 };
512};
513
514&dss {
515 status = "ok";
516};
517
518&hdmi {
519 status = "ok";
520
521 port {
522 hdmi_out: endpoint {
523 remote-endpoint = <&tpd12s015_in>;
524 };
525 };
526};
527
528&atl {
529 assigned-clocks = <&abe_dpll_sys_clk_mux>,
530 <&atl_clkctrl DRA7_ATL_ATL_CLKCTRL 26>,
531 <&dpll_abe_ck>,
532 <&dpll_abe_m2x2_ck>,
533 <&atl_clkin2_ck>;
534 assigned-clock-parents = <&sys_clkin2>, <&dpll_abe_m2_ck>;
535 assigned-clock-rates = <0>, <0>, <180633600>, <361267200>, <5644800>;
536
537 status = "okay";
538
539 atl2 {
540 bws = <DRA7_ATL_WS_MCASP2_FSX>;
541 aws = <DRA7_ATL_WS_MCASP3_FSX>;
542 };
543};
544
545&mcasp3 {
546 #sound-dai-cells = <0>;
547
548 assigned-clocks = <&l4per2_clkctrl DRA7_L4PER2_MCASP3_CLKCTRL 24>;
549 assigned-clock-parents = <&atl_clkin2_ck>;
550
551 status = "okay";
552
553 op-mode = <0>; /* MCASP_IIS_MODE */
554 tdm-slots = <2>;
555 /* 4 serializer */
556 serial-dir = < /* 0: INACTIVE, 1: TX, 2: RX */
557 1 2 0 0
558 >;
559 tx-num-evt = <32>;
560 rx-num-evt = <32>;
561};
562
563&mailbox5 {
564 status = "okay";
565 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
566 status = "okay";
567 };
568 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
569 status = "okay";
570 };
571};
572
573&mailbox6 {
574 status = "okay";
575 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
576 status = "okay";
577 };
578};
579
580&pcie1_rc {
581 status = "okay";
582};