Loading...
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "bcm2835.dtsi"
4#include "bcm2835-rpi.dtsi"
5#include "bcm283x-rpi-usb-host.dtsi"
6
7/ {
8 compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
9 model = "Raspberry Pi Model A+";
10
11 leds {
12 act {
13 gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
14 };
15
16 pwr {
17 label = "PWR";
18 gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
19 default-state = "keep";
20 linux,default-trigger = "default-on";
21 };
22 };
23};
24
25&gpio {
26 /*
27 * This is based on the unreleased schematic for the Model A+.
28 *
29 * Legend:
30 * "NC" = not connected (no rail from the SoC)
31 * "FOO" = GPIO line named "FOO" on the schematic
32 * "FOO_N" = GPIO line named "FOO" on schematic, active low
33 */
34 gpio-line-names = "SDA0",
35 "SCL0",
36 "SDA1",
37 "SCL1",
38 "GPIO_GCLK",
39 "GPIO5",
40 "GPIO6",
41 "SPI_CE1_N",
42 "SPI_CE0_N",
43 "SPI_MISO",
44 "SPI_MOSI",
45 "SPI_SCLK",
46 "GPIO12",
47 "GPIO13",
48 /* Serial port */
49 "TXD0",
50 "RXD0",
51 "GPIO16",
52 "GPIO17",
53 "GPIO18",
54 "GPIO19",
55 "GPIO20",
56 "GPIO21",
57 "GPIO22",
58 "GPIO23",
59 "GPIO24",
60 "GPIO25",
61 "GPIO26",
62 "GPIO27",
63 "SDA0",
64 "SCL0",
65 "NC", /* GPIO30 */
66 "NC", /* GPIO31 */
67 "CAM_GPIO1", /* GPIO32 */
68 "NC", /* GPIO33 */
69 "NC", /* GPIO34 */
70 "PWR_LOW_N", /* GPIO35 */
71 "NC", /* GPIO36 */
72 "NC", /* GPIO37 */
73 "USB_LIMIT", /* GPIO38 */
74 "NC", /* GPIO39 */
75 "PWM0_OUT", /* GPIO40 */
76 "CAM_GPIO0", /* GPIO41 */
77 "NC", /* GPIO42 */
78 "NC", /* GPIO43 */
79 "NC", /* GPIO44 */
80 "PWM1_OUT", /* GPIO45 */
81 "HDMI_HPD_N",
82 "STATUS_LED",
83 /* Used by SD Card */
84 "SD_CLK_R",
85 "SD_CMD_R",
86 "SD_DATA0_R",
87 "SD_DATA1_R",
88 "SD_DATA2_R",
89 "SD_DATA3_R";
90
91 pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
92
93 /* I2S interface */
94 i2s_alt0: i2s_alt0 {
95 brcm,pins = <18 19 20 21>;
96 brcm,function = <BCM2835_FSEL_ALT0>;
97 };
98};
99
100&hdmi {
101 hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
102};
103
104&uart0 {
105 pinctrl-names = "default";
106 pinctrl-0 = <&uart0_gpio14>;
107 status = "okay";
108};
1// SPDX-License-Identifier: GPL-2.0
2/dts-v1/;
3#include "bcm2835.dtsi"
4#include "bcm2835-rpi.dtsi"
5#include "bcm283x-rpi-usb-host.dtsi"
6
7/ {
8 compatible = "raspberrypi,model-a-plus", "brcm,bcm2835";
9 model = "Raspberry Pi Model A+";
10
11 memory@0 {
12 device_type = "memory";
13 reg = <0 0x10000000>;
14 };
15
16 leds {
17 act {
18 gpios = <&gpio 47 GPIO_ACTIVE_HIGH>;
19 };
20
21 pwr {
22 label = "PWR";
23 gpios = <&gpio 35 GPIO_ACTIVE_HIGH>;
24 default-state = "keep";
25 linux,default-trigger = "default-on";
26 };
27 };
28};
29
30&gpio {
31 /*
32 * This is based on the unreleased schematic for the Model A+.
33 *
34 * Legend:
35 * "NC" = not connected (no rail from the SoC)
36 * "FOO" = GPIO line named "FOO" on the schematic
37 * "FOO_N" = GPIO line named "FOO" on schematic, active low
38 */
39 gpio-line-names = "ID_SDA",
40 "ID_SCL",
41 "SDA1",
42 "SCL1",
43 "GPIO_GCLK",
44 "GPIO5",
45 "GPIO6",
46 "SPI_CE1_N",
47 "SPI_CE0_N",
48 "SPI_MISO",
49 "SPI_MOSI",
50 "SPI_SCLK",
51 "GPIO12",
52 "GPIO13",
53 /* Serial port */
54 "TXD0",
55 "RXD0",
56 "GPIO16",
57 "GPIO17",
58 "GPIO18",
59 "GPIO19",
60 "GPIO20",
61 "GPIO21",
62 "GPIO22",
63 "GPIO23",
64 "GPIO24",
65 "GPIO25",
66 "GPIO26",
67 "GPIO27",
68 "SDA0",
69 "SCL0",
70 "NC", /* GPIO30 */
71 "NC", /* GPIO31 */
72 "CAM_GPIO1", /* GPIO32 */
73 "NC", /* GPIO33 */
74 "NC", /* GPIO34 */
75 "PWR_LOW_N", /* GPIO35 */
76 "NC", /* GPIO36 */
77 "NC", /* GPIO37 */
78 "USB_LIMIT", /* GPIO38 */
79 "NC", /* GPIO39 */
80 "PWM0_OUT", /* GPIO40 */
81 "CAM_GPIO0", /* GPIO41 */
82 "NC", /* GPIO42 */
83 "NC", /* GPIO43 */
84 "NC", /* GPIO44 */
85 "PWM1_OUT", /* GPIO45 */
86 "HDMI_HPD_N",
87 "STATUS_LED",
88 /* Used by SD Card */
89 "SD_CLK_R",
90 "SD_CMD_R",
91 "SD_DATA0_R",
92 "SD_DATA1_R",
93 "SD_DATA2_R",
94 "SD_DATA3_R";
95
96 pinctrl-0 = <&gpioout &alt0 &i2s_alt0>;
97
98 /* I2S interface */
99 i2s_alt0: i2s_alt0 {
100 brcm,pins = <18 19 20 21>;
101 brcm,function = <BCM2835_FSEL_ALT0>;
102 };
103};
104
105&hdmi {
106 hpd-gpios = <&gpio 46 GPIO_ACTIVE_LOW>;
107 power-domains = <&power RPI_POWER_DOMAIN_HDMI>;
108 status = "okay";
109};
110
111&pwm {
112 pinctrl-names = "default";
113 pinctrl-0 = <&pwm0_gpio40 &pwm1_gpio45>;
114 status = "okay";
115};
116
117&sdhost {
118 pinctrl-names = "default";
119 pinctrl-0 = <&sdhost_gpio48>;
120 bus-width = <4>;
121 status = "okay";
122};
123
124&uart0 {
125 pinctrl-names = "default";
126 pinctrl-0 = <&uart0_gpio14>;
127 status = "okay";
128};