Loading...
1/*
2 * Copyright 2016 Linaro Ltd
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a copy
5 * of this software and associated documentation files (the "Software"), to deal
6 * in the Software without restriction, including without limitation the rights
7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
8 * copies of the Software, and to permit persons to whom the Software is
9 * furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
20 * THE SOFTWARE.
21 */
22
23#include <dt-bindings/interrupt-controller/irq.h>
24#include <dt-bindings/gpio/gpio.h>
25#include "skeleton.dtsi"
26
27/ {
28 compatible = "arm,realview-pbx";
29
30 chosen { };
31
32 aliases {
33 serial0 = &serial0;
34 serial1 = &serial1;
35 serial2 = &serial2;
36 serial3 = &serial3;
37 i2c0 = &i2c0;
38 i2c1 = &i2c1;
39 };
40
41 memory {
42 /* 128 MiB memory @ 0x0 */
43 reg = <0x00000000 0x08000000>;
44 };
45
46 /* The voltage to the MMC card is hardwired at 3.3V */
47 vmmc: fixedregulator@0 {
48 compatible = "regulator-fixed";
49 regulator-name = "vmmc";
50 regulator-min-microvolt = <3300000>;
51 regulator-max-microvolt = <3300000>;
52 regulator-boot-on;
53 };
54
55 veth: fixedregulator@0 {
56 compatible = "regulator-fixed";
57 regulator-name = "veth";
58 regulator-min-microvolt = <3300000>;
59 regulator-max-microvolt = <3300000>;
60 regulator-boot-on;
61 };
62
63 xtal24mhz: xtal24mhz@24M {
64 #clock-cells = <0>;
65 compatible = "fixed-clock";
66 clock-frequency = <24000000>;
67 };
68
69 refclk32khz: refclk32khz {
70 #clock-cells = <0>;
71 compatible = "fixed-clock";
72 clock-frequency = <32768>;
73 };
74
75 timclk: timclk@1M {
76 #clock-cells = <0>;
77 compatible = "fixed-factor-clock";
78 clock-div = <24>;
79 clock-mult = <1>;
80 clocks = <&xtal24mhz>;
81 };
82
83 mclk: mclk@24M {
84 #clock-cells = <0>;
85 compatible = "fixed-factor-clock";
86 clock-div = <1>;
87 clock-mult = <1>;
88 clocks = <&xtal24mhz>;
89 };
90
91 kmiclk: kmiclk@24M {
92 #clock-cells = <0>;
93 compatible = "fixed-factor-clock";
94 clock-div = <1>;
95 clock-mult = <1>;
96 clocks = <&xtal24mhz>;
97 };
98
99 sspclk: sspclk@24M {
100 #clock-cells = <0>;
101 compatible = "fixed-factor-clock";
102 clock-div = <1>;
103 clock-mult = <1>;
104 clocks = <&xtal24mhz>;
105 };
106
107 uartclk: uartclk@24M {
108 #clock-cells = <0>;
109 compatible = "fixed-factor-clock";
110 clock-div = <1>;
111 clock-mult = <1>;
112 clocks = <&xtal24mhz>;
113 };
114
115 wdogclk: wdogclk@24M {
116 #clock-cells = <0>;
117 compatible = "fixed-factor-clock";
118 clock-div = <1>;
119 clock-mult = <1>;
120 clocks = <&xtal24mhz>;
121 };
122
123 /* FIXME: this actually hangs off the PLL clocks */
124 pclk: pclk@0 {
125 #clock-cells = <0>;
126 compatible = "fixed-clock";
127 clock-frequency = <0>;
128 };
129
130 flash0@40000000 {
131 /* 2 * 32MiB NOR Flash memory */
132 compatible = "arm,versatile-flash", "cfi-flash";
133 reg = <0x40000000 0x04000000>;
134 bank-width = <4>;
135 };
136
137 flash1@44000000 {
138 /* 2 * 32MiB NOR Flash memory */
139 compatible = "arm,versatile-flash", "cfi-flash";
140 reg = <0x44000000 0x04000000>;
141 bank-width = <4>;
142 };
143
144 /* SMSC 9118 ethernet with PHY and EEPROM */
145 ethernet: ethernet@4e000000 {
146 compatible = "smsc,lan9118", "smsc,lan9115";
147 reg = <0x4e000000 0x10000>;
148 phy-mode = "mii";
149 reg-io-width = <4>;
150 smsc,irq-active-high;
151 smsc,irq-push-pull;
152 vdd33a-supply = <&veth>;
153 vddvario-supply = <&veth>;
154 };
155
156 usb: usb@4f000000 {
157 compatible = "nxp,usb-isp1761";
158 reg = <0x4f000000 0x20000>;
159 port1-otg;
160 };
161
162 bridge {
163 compatible = "ti,ths8134a", "ti,ths8134";
164 #address-cells = <1>;
165 #size-cells = <0>;
166
167 ports {
168 #address-cells = <1>;
169 #size-cells = <0>;
170
171 port@0 {
172 reg = <0>;
173
174 vga_bridge_in: endpoint {
175 remote-endpoint = <&clcd_pads>;
176 };
177 };
178
179 port@1 {
180 reg = <1>;
181
182 vga_bridge_out: endpoint {
183 remote-endpoint = <&vga_con_in>;
184 };
185 };
186 };
187 };
188
189 vga {
190 /*
191 * This DDC I2C is connected directly to the DVI portions
192 * of the connector, so it's not really working when the
193 * monitor is connected to the VGA connector.
194 */
195 compatible = "vga-connector";
196 ddc-i2c-bus = <&i2c1>;
197
198 port {
199 vga_con_in: endpoint {
200 remote-endpoint = <&vga_bridge_out>;
201 };
202 };
203 };
204
205 soc: soc@0 {
206 compatible = "arm,realview-pbx-soc", "simple-bus";
207 #address-cells = <1>;
208 #size-cells = <1>;
209 regmap = <&syscon>;
210 ranges;
211
212 syscon: syscon@10000000 {
213 compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
214 reg = <0x10000000 0x1000>;
215
216 led@08.0 {
217 compatible = "register-bit-led";
218 offset = <0x08>;
219 mask = <0x01>;
220 label = "versatile:0";
221 linux,default-trigger = "heartbeat";
222 default-state = "on";
223 };
224 led@08.1 {
225 compatible = "register-bit-led";
226 offset = <0x08>;
227 mask = <0x02>;
228 label = "versatile:1";
229 linux,default-trigger = "mmc0";
230 default-state = "off";
231 };
232 led@08.2 {
233 compatible = "register-bit-led";
234 offset = <0x08>;
235 mask = <0x04>;
236 label = "versatile:2";
237 linux,default-trigger = "cpu0";
238 default-state = "off";
239 };
240 led@08.3 {
241 compatible = "register-bit-led";
242 offset = <0x08>;
243 mask = <0x08>;
244 label = "versatile:3";
245 default-state = "off";
246 };
247 led@08.4 {
248 compatible = "register-bit-led";
249 offset = <0x08>;
250 mask = <0x10>;
251 label = "versatile:4";
252 default-state = "off";
253 };
254 led@08.5 {
255 compatible = "register-bit-led";
256 offset = <0x08>;
257 mask = <0x20>;
258 label = "versatile:5";
259 default-state = "off";
260 };
261 led@08.6 {
262 compatible = "register-bit-led";
263 offset = <0x08>;
264 mask = <0x40>;
265 label = "versatile:6";
266 default-state = "off";
267 };
268 led@08.7 {
269 compatible = "register-bit-led";
270 offset = <0x08>;
271 mask = <0x80>;
272 label = "versatile:7";
273 default-state = "off";
274 };
275 oscclk0: osc0@0c {
276 compatible = "arm,syscon-icst307";
277 #clock-cells = <0>;
278 lock-offset = <0x20>;
279 vco-offset = <0x0C>;
280 clocks = <&xtal24mhz>;
281 };
282 oscclk1: osc1@10 {
283 compatible = "arm,syscon-icst307";
284 #clock-cells = <0>;
285 lock-offset = <0x20>;
286 vco-offset = <0x10>;
287 clocks = <&xtal24mhz>;
288 };
289 oscclk2: osc2@14 {
290 compatible = "arm,syscon-icst307";
291 #clock-cells = <0>;
292 lock-offset = <0x20>;
293 vco-offset = <0x14>;
294 clocks = <&xtal24mhz>;
295 };
296 oscclk3: osc3@18 {
297 compatible = "arm,syscon-icst307";
298 #clock-cells = <0>;
299 lock-offset = <0x20>;
300 vco-offset = <0x18>;
301 clocks = <&xtal24mhz>;
302 };
303 oscclk4: osc4@1c {
304 compatible = "arm,syscon-icst307";
305 #clock-cells = <0>;
306 lock-offset = <0x20>;
307 vco-offset = <0x1c>;
308 clocks = <&xtal24mhz>;
309 };
310 };
311
312 sp810_syscon0: sysctl@10001000 {
313 compatible = "arm,sp810", "arm,primecell";
314 reg = <0x10001000 0x1000>;
315 clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
316 clock-names = "refclk", "timclk", "apb_pclk";
317 #clock-cells = <1>;
318 clock-output-names = "timerclk0",
319 "timerclk1",
320 "timerclk2",
321 "timerclk3";
322 assigned-clocks = <&sp810_syscon0 0>,
323 <&sp810_syscon0 1>,
324 <&sp810_syscon0 2>,
325 <&sp810_syscon0 3>;
326 assigned-clock-parents = <&timclk>,
327 <&timclk>,
328 <&timclk>,
329 <&timclk>;
330 };
331
332 i2c0: i2c@10002000 {
333 #address-cells = <1>;
334 #size-cells = <0>;
335 compatible = "arm,versatile-i2c";
336 reg = <0x10002000 0x1000>;
337
338 rtc@68 {
339 compatible = "dallas,ds1338";
340 reg = <0x68>;
341 };
342 };
343
344 serial0: serial@10009000 {
345 compatible = "arm,pl011", "arm,primecell";
346 reg = <0x10009000 0x1000>;
347 clocks = <&uartclk>, <&pclk>;
348 clock-names = "uartclk", "apb_pclk";
349 };
350
351 serial1: serial@1000a000 {
352 compatible = "arm,pl011", "arm,primecell";
353 reg = <0x1000a000 0x1000>;
354 clocks = <&uartclk>, <&pclk>;
355 clock-names = "uartclk", "apb_pclk";
356 };
357
358 serial2: serial@1000b000 {
359 compatible = "arm,pl011", "arm,primecell";
360 reg = <0x1000b000 0x1000>;
361 clocks = <&uartclk>, <&pclk>;
362 clock-names = "uartclk", "apb_pclk";
363 };
364
365 ssp: ssp@1000d000 {
366 compatible = "arm,pl022", "arm,primecell";
367 reg = <0x1000d000 0x1000>;
368 clocks = <&sspclk>, <&pclk>;
369 clock-names = "SSPCLK", "apb_pclk";
370 };
371
372 wdog0: watchdog@1000f000 {
373 compatible = "arm,sp805", "arm,primecell";
374 reg = <0x1000f000 0x1000>;
375 clocks = <&wdogclk>, <&pclk>;
376 clock-names = "wdogclk", "apb_pclk";
377 status = "disabled";
378 };
379
380 wdog1: watchdog@10010000 {
381 compatible = "arm,sp805", "arm,primecell";
382 reg = <0x10010000 0x1000>;
383 clocks = <&wdogclk>, <&pclk>;
384 clock-names = "wdogclk", "apb_pclk";
385 status = "disabled";
386 };
387
388 timer01: timer@10011000 {
389 compatible = "arm,sp804", "arm,primecell";
390 reg = <0x10011000 0x1000>;
391 clocks = <&sp810_syscon0 0>,
392 <&sp810_syscon0 1>,
393 <&pclk>;
394 clock-names = "timerclk0",
395 "timerclk1",
396 "apb_pclk";
397 };
398
399 timer23: timer@10012000 {
400 compatible = "arm,sp804", "arm,primecell";
401 reg = <0x10012000 0x1000>;
402 clocks = <&sp810_syscon0 2>,
403 <&sp810_syscon0 3>,
404 <&pclk>;
405 clock-names = "timerclk2",
406 "timerclk3",
407 "apb_pclk";
408 };
409
410 gpio0: gpio@10013000 {
411 compatible = "arm,pl061", "arm,primecell";
412 reg = <0x10013000 0x1000>;
413 gpio-controller;
414 #gpio-cells = <2>;
415 interrupt-controller;
416 #interrupt-cells = <2>;
417 clocks = <&pclk>;
418 clock-names = "apb_pclk";
419 };
420
421 gpio1: gpio@10014000 {
422 compatible = "arm,pl061", "arm,primecell";
423 reg = <0x10014000 0x1000>;
424 gpio-controller;
425 #gpio-cells = <2>;
426 interrupt-controller;
427 #interrupt-cells = <2>;
428 clocks = <&pclk>;
429 clock-names = "apb_pclk";
430 };
431
432 gpio2: gpio@10015000 {
433 compatible = "arm,pl061", "arm,primecell";
434 reg = <0x10015000 0x1000>;
435 gpio-controller;
436 #gpio-cells = <2>;
437 interrupt-controller;
438 #interrupt-cells = <2>;
439 clocks = <&pclk>;
440 clock-names = "apb_pclk";
441 };
442
443 i2c1: i2c@10016000 {
444 #address-cells = <1>;
445 #size-cells = <0>;
446 compatible = "arm,versatile-i2c";
447 reg = <0x10016000 0x1000>;
448 };
449
450 rtc: rtc@10017000 {
451 compatible = "arm,pl031", "arm,primecell";
452 reg = <0x10017000 0x1000>;
453 clocks = <&pclk>;
454 clock-names = "apb_pclk";
455 };
456
457 timer45: timer@10018000 {
458 compatible = "arm,sp804", "arm,primecell";
459 reg = <0x10018000 0x1000>;
460 clocks = <&timclk>, <&timclk>, <&pclk>;
461 clock-names = "timerclk4", "timerclk5", "apb_pclk";
462 };
463
464 timer67: timer@10019000 {
465 compatible = "arm,sp804", "arm,primecell";
466 reg = <0x10019000 0x1000>;
467 clocks = <&timclk>, <&timclk>, <&pclk>;
468 clock-names = "timerclk6", "timerclk7", "apb_pclk";
469 };
470
471 sp810_syscon1: sysctl@1001a000 {
472 compatible = "arm,sp810", "arm,primecell";
473 reg = <0x1001a000 0x1000>;
474 clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
475 clock-names = "refclk", "timclk", "apb_pclk";
476 #clock-cells = <1>;
477 clock-output-names = "timerclk4",
478 "timerclk5",
479 "timerclk6",
480 "timerclk7";
481 assigned-clocks = <&sp810_syscon1 0>,
482 <&sp810_syscon1 1>,
483 <&sp810_syscon1 2>,
484 <&sp810_syscon1 3>;
485 assigned-clock-parents = <&timclk>,
486 <&timclk>,
487 <&timclk>,
488 <&timclk>;
489 };
490 };
491
492
493 /* These peripherals are inside the FPGA */
494 fpga {
495 #address-cells = <1>;
496 #size-cells = <1>;
497 compatible = "simple-bus";
498 ranges;
499
500 aaci: aaci@10004000 {
501 compatible = "arm,pl041", "arm,primecell";
502 reg = <0x10004000 0x1000>;
503 clocks = <&pclk>;
504 clock-names = "apb_pclk";
505 };
506
507 mmc: mmcsd@10005000 {
508 compatible = "arm,pl18x", "arm,primecell";
509 reg = <0x10005000 0x1000>;
510
511 /* Due to frequent FIFO overruns, use just 500 kHz */
512 max-frequency = <500000>;
513 bus-width = <4>;
514 cap-sd-highspeed;
515 cap-mmc-highspeed;
516 clocks = <&mclk>, <&pclk>;
517 clock-names = "mclk", "apb_pclk";
518 vmmc-supply = <&vmmc>;
519 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
520 wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
521 };
522
523 kmi0: kmi@10006000 {
524 compatible = "arm,pl050", "arm,primecell";
525 reg = <0x10006000 0x1000>;
526 clocks = <&kmiclk>, <&pclk>;
527 clock-names = "KMIREFCLK", "apb_pclk";
528 };
529
530 kmi1: kmi@10007000 {
531 compatible = "arm,pl050", "arm,primecell";
532 reg = <0x10007000 0x1000>;
533 clocks = <&kmiclk>, <&pclk>;
534 clock-names = "KMIREFCLK", "apb_pclk";
535 };
536
537 serial3: serial@1000c000 {
538 compatible = "arm,pl011", "arm,primecell";
539 reg = <0x1000c000 0x1000>;
540 clocks = <&uartclk>, <&pclk>;
541 clock-names = "uartclk", "apb_pclk";
542 };
543 };
544
545 /* These peripherals are inside the NEC ISSP */
546 issp {
547 #address-cells = <1>;
548 #size-cells = <1>;
549 compatible = "simple-bus";
550 ranges;
551
552 clcd: clcd@10020000 {
553 compatible = "arm,pl111", "arm,primecell";
554 reg = <0x10020000 0x1000>;
555 interrupt-names = "combined";
556 clocks = <&oscclk4>, <&pclk>;
557 clock-names = "clcdclk", "apb_pclk";
558 /* 1024x768 16bpp @65MHz works fine */
559 max-memory-bandwidth = <95000000>;
560
561 port {
562 clcd_pads: endpoint {
563 remote-endpoint = <&vga_bridge_in>;
564 arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
565 };
566 };
567 };
568 };
569};
570
1/*
2 * Copyright 2016 Linaro Ltd
3 *
4 * Permission is hereby granted, free of charge, to any person obtaining a copy
5 * of this software and associated documentation files (the "Software"), to deal
6 * in the Software without restriction, including without limitation the rights
7 * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
8 * copies of the Software, and to permit persons to whom the Software is
9 * furnished to do so, subject to the following conditions:
10 *
11 * The above copyright notice and this permission notice shall be included in
12 * all copies or substantial portions of the Software.
13 *
14 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
15 * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
16 * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
17 * THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
18 * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
19 * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
20 * THE SOFTWARE.
21 */
22
23#include <dt-bindings/interrupt-controller/irq.h>
24#include <dt-bindings/gpio/gpio.h>
25
26/ {
27 #address-cells = <1>;
28 #size-cells = <1>;
29 compatible = "arm,realview-pbx";
30
31 chosen { };
32
33 aliases {
34 serial0 = &serial0;
35 serial1 = &serial1;
36 serial2 = &serial2;
37 serial3 = &serial3;
38 i2c0 = &i2c0;
39 i2c1 = &i2c1;
40 };
41
42 memory {
43 device_type = "memory";
44 /* 128 MiB memory @ 0x0 */
45 reg = <0x00000000 0x08000000>;
46 };
47
48 /* The voltage to the MMC card is hardwired at 3.3V */
49 vmmc: regulator-vmmc {
50 compatible = "regulator-fixed";
51 regulator-name = "vmmc";
52 regulator-min-microvolt = <3300000>;
53 regulator-max-microvolt = <3300000>;
54 regulator-boot-on;
55 };
56
57 veth: regulator-veth {
58 compatible = "regulator-fixed";
59 regulator-name = "veth";
60 regulator-min-microvolt = <3300000>;
61 regulator-max-microvolt = <3300000>;
62 regulator-boot-on;
63 };
64
65 xtal24mhz: xtal24mhz@24M {
66 #clock-cells = <0>;
67 compatible = "fixed-clock";
68 clock-frequency = <24000000>;
69 };
70
71 refclk32khz: refclk32khz {
72 #clock-cells = <0>;
73 compatible = "fixed-clock";
74 clock-frequency = <32768>;
75 };
76
77 timclk: timclk@1M {
78 #clock-cells = <0>;
79 compatible = "fixed-factor-clock";
80 clock-div = <24>;
81 clock-mult = <1>;
82 clocks = <&xtal24mhz>;
83 };
84
85 mclk: mclk@24M {
86 #clock-cells = <0>;
87 compatible = "fixed-factor-clock";
88 clock-div = <1>;
89 clock-mult = <1>;
90 clocks = <&xtal24mhz>;
91 };
92
93 kmiclk: kmiclk@24M {
94 #clock-cells = <0>;
95 compatible = "fixed-factor-clock";
96 clock-div = <1>;
97 clock-mult = <1>;
98 clocks = <&xtal24mhz>;
99 };
100
101 sspclk: sspclk@24M {
102 #clock-cells = <0>;
103 compatible = "fixed-factor-clock";
104 clock-div = <1>;
105 clock-mult = <1>;
106 clocks = <&xtal24mhz>;
107 };
108
109 uartclk: uartclk@24M {
110 #clock-cells = <0>;
111 compatible = "fixed-factor-clock";
112 clock-div = <1>;
113 clock-mult = <1>;
114 clocks = <&xtal24mhz>;
115 };
116
117 wdogclk: wdogclk@24M {
118 #clock-cells = <0>;
119 compatible = "fixed-factor-clock";
120 clock-div = <1>;
121 clock-mult = <1>;
122 clocks = <&xtal24mhz>;
123 };
124
125 /* FIXME: this actually hangs off the PLL clocks */
126 pclk: pclk@0 {
127 #clock-cells = <0>;
128 compatible = "fixed-clock";
129 clock-frequency = <0>;
130 };
131
132 flash0@40000000 {
133 /* 2 * 32MiB NOR Flash memory */
134 compatible = "arm,versatile-flash", "cfi-flash";
135 reg = <0x40000000 0x04000000>;
136 bank-width = <4>;
137 partitions {
138 compatible = "arm,arm-firmware-suite";
139 };
140 };
141
142 flash1@44000000 {
143 /* 2 * 32MiB NOR Flash memory */
144 compatible = "arm,versatile-flash", "cfi-flash";
145 reg = <0x44000000 0x04000000>;
146 bank-width = <4>;
147 partitions {
148 compatible = "arm,arm-firmware-suite";
149 };
150 };
151
152 /* SMSC 9118 ethernet with PHY and EEPROM */
153 ethernet: ethernet@4e000000 {
154 compatible = "smsc,lan9118", "smsc,lan9115";
155 reg = <0x4e000000 0x10000>;
156 phy-mode = "mii";
157 reg-io-width = <4>;
158 smsc,irq-active-high;
159 smsc,irq-push-pull;
160 vdd33a-supply = <&veth>;
161 vddvario-supply = <&veth>;
162 };
163
164 usb: usb@4f000000 {
165 compatible = "nxp,usb-isp1761";
166 reg = <0x4f000000 0x20000>;
167 port1-otg;
168 };
169
170 bridge {
171 compatible = "ti,ths8134a", "ti,ths8134";
172 #address-cells = <1>;
173 #size-cells = <0>;
174
175 ports {
176 #address-cells = <1>;
177 #size-cells = <0>;
178
179 port@0 {
180 reg = <0>;
181
182 vga_bridge_in: endpoint {
183 remote-endpoint = <&clcd_pads>;
184 };
185 };
186
187 port@1 {
188 reg = <1>;
189
190 vga_bridge_out: endpoint {
191 remote-endpoint = <&vga_con_in>;
192 };
193 };
194 };
195 };
196
197 vga {
198 /*
199 * This DDC I2C is connected directly to the DVI portions
200 * of the connector, so it's not really working when the
201 * monitor is connected to the VGA connector.
202 */
203 compatible = "vga-connector";
204 ddc-i2c-bus = <&i2c1>;
205
206 port {
207 vga_con_in: endpoint {
208 remote-endpoint = <&vga_bridge_out>;
209 };
210 };
211 };
212
213 soc: soc@0 {
214 compatible = "arm,realview-pbx-soc", "simple-bus";
215 #address-cells = <1>;
216 #size-cells = <1>;
217 regmap = <&syscon>;
218 ranges;
219
220 syscon: syscon@10000000 {
221 compatible = "arm,realview-pbx-syscon", "syscon", "simple-mfd";
222 reg = <0x10000000 0x1000>;
223
224 led@08.0 {
225 compatible = "register-bit-led";
226 offset = <0x08>;
227 mask = <0x01>;
228 label = "versatile:0";
229 linux,default-trigger = "heartbeat";
230 default-state = "on";
231 };
232 led@08.1 {
233 compatible = "register-bit-led";
234 offset = <0x08>;
235 mask = <0x02>;
236 label = "versatile:1";
237 linux,default-trigger = "mmc0";
238 default-state = "off";
239 };
240 led@08.2 {
241 compatible = "register-bit-led";
242 offset = <0x08>;
243 mask = <0x04>;
244 label = "versatile:2";
245 linux,default-trigger = "cpu0";
246 default-state = "off";
247 };
248 led@08.3 {
249 compatible = "register-bit-led";
250 offset = <0x08>;
251 mask = <0x08>;
252 label = "versatile:3";
253 default-state = "off";
254 };
255 led@08.4 {
256 compatible = "register-bit-led";
257 offset = <0x08>;
258 mask = <0x10>;
259 label = "versatile:4";
260 default-state = "off";
261 };
262 led@08.5 {
263 compatible = "register-bit-led";
264 offset = <0x08>;
265 mask = <0x20>;
266 label = "versatile:5";
267 default-state = "off";
268 };
269 led@08.6 {
270 compatible = "register-bit-led";
271 offset = <0x08>;
272 mask = <0x40>;
273 label = "versatile:6";
274 default-state = "off";
275 };
276 led@08.7 {
277 compatible = "register-bit-led";
278 offset = <0x08>;
279 mask = <0x80>;
280 label = "versatile:7";
281 default-state = "off";
282 };
283 oscclk0: osc0@0c {
284 compatible = "arm,syscon-icst307";
285 #clock-cells = <0>;
286 lock-offset = <0x20>;
287 vco-offset = <0x0C>;
288 clocks = <&xtal24mhz>;
289 };
290 oscclk1: osc1@10 {
291 compatible = "arm,syscon-icst307";
292 #clock-cells = <0>;
293 lock-offset = <0x20>;
294 vco-offset = <0x10>;
295 clocks = <&xtal24mhz>;
296 };
297 oscclk2: osc2@14 {
298 compatible = "arm,syscon-icst307";
299 #clock-cells = <0>;
300 lock-offset = <0x20>;
301 vco-offset = <0x14>;
302 clocks = <&xtal24mhz>;
303 };
304 oscclk3: osc3@18 {
305 compatible = "arm,syscon-icst307";
306 #clock-cells = <0>;
307 lock-offset = <0x20>;
308 vco-offset = <0x18>;
309 clocks = <&xtal24mhz>;
310 };
311 oscclk4: osc4@1c {
312 compatible = "arm,syscon-icst307";
313 #clock-cells = <0>;
314 lock-offset = <0x20>;
315 vco-offset = <0x1c>;
316 clocks = <&xtal24mhz>;
317 };
318 };
319
320 sp810_syscon0: sysctl@10001000 {
321 compatible = "arm,sp810", "arm,primecell";
322 reg = <0x10001000 0x1000>;
323 clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
324 clock-names = "refclk", "timclk", "apb_pclk";
325 #clock-cells = <1>;
326 clock-output-names = "timerclk0",
327 "timerclk1",
328 "timerclk2",
329 "timerclk3";
330 assigned-clocks = <&sp810_syscon0 0>,
331 <&sp810_syscon0 1>,
332 <&sp810_syscon0 2>,
333 <&sp810_syscon0 3>;
334 assigned-clock-parents = <&timclk>,
335 <&timclk>,
336 <&timclk>,
337 <&timclk>;
338 };
339
340 i2c0: i2c@10002000 {
341 #address-cells = <1>;
342 #size-cells = <0>;
343 compatible = "arm,versatile-i2c";
344 reg = <0x10002000 0x1000>;
345
346 rtc@68 {
347 compatible = "dallas,ds1338";
348 reg = <0x68>;
349 };
350 };
351
352 serial0: serial@10009000 {
353 compatible = "arm,pl011", "arm,primecell";
354 reg = <0x10009000 0x1000>;
355 clocks = <&uartclk>, <&pclk>;
356 clock-names = "uartclk", "apb_pclk";
357 };
358
359 serial1: serial@1000a000 {
360 compatible = "arm,pl011", "arm,primecell";
361 reg = <0x1000a000 0x1000>;
362 clocks = <&uartclk>, <&pclk>;
363 clock-names = "uartclk", "apb_pclk";
364 };
365
366 serial2: serial@1000b000 {
367 compatible = "arm,pl011", "arm,primecell";
368 reg = <0x1000b000 0x1000>;
369 clocks = <&uartclk>, <&pclk>;
370 clock-names = "uartclk", "apb_pclk";
371 };
372
373 ssp: spi@1000d000 {
374 compatible = "arm,pl022", "arm,primecell";
375 reg = <0x1000d000 0x1000>;
376 clocks = <&sspclk>, <&pclk>;
377 clock-names = "SSPCLK", "apb_pclk";
378 };
379
380 wdog0: watchdog@1000f000 {
381 compatible = "arm,sp805", "arm,primecell";
382 reg = <0x1000f000 0x1000>;
383 clocks = <&wdogclk>, <&pclk>;
384 clock-names = "wdogclk", "apb_pclk";
385 status = "disabled";
386 };
387
388 wdog1: watchdog@10010000 {
389 compatible = "arm,sp805", "arm,primecell";
390 reg = <0x10010000 0x1000>;
391 clocks = <&wdogclk>, <&pclk>;
392 clock-names = "wdogclk", "apb_pclk";
393 status = "disabled";
394 };
395
396 timer01: timer@10011000 {
397 compatible = "arm,sp804", "arm,primecell";
398 reg = <0x10011000 0x1000>;
399 clocks = <&sp810_syscon0 0>,
400 <&sp810_syscon0 1>,
401 <&pclk>;
402 clock-names = "timerclk0",
403 "timerclk1",
404 "apb_pclk";
405 };
406
407 timer23: timer@10012000 {
408 compatible = "arm,sp804", "arm,primecell";
409 reg = <0x10012000 0x1000>;
410 clocks = <&sp810_syscon0 2>,
411 <&sp810_syscon0 3>,
412 <&pclk>;
413 clock-names = "timerclk2",
414 "timerclk3",
415 "apb_pclk";
416 };
417
418 gpio0: gpio@10013000 {
419 compatible = "arm,pl061", "arm,primecell";
420 reg = <0x10013000 0x1000>;
421 gpio-controller;
422 #gpio-cells = <2>;
423 interrupt-controller;
424 #interrupt-cells = <2>;
425 clocks = <&pclk>;
426 clock-names = "apb_pclk";
427 };
428
429 gpio1: gpio@10014000 {
430 compatible = "arm,pl061", "arm,primecell";
431 reg = <0x10014000 0x1000>;
432 gpio-controller;
433 #gpio-cells = <2>;
434 interrupt-controller;
435 #interrupt-cells = <2>;
436 clocks = <&pclk>;
437 clock-names = "apb_pclk";
438 };
439
440 gpio2: gpio@10015000 {
441 compatible = "arm,pl061", "arm,primecell";
442 reg = <0x10015000 0x1000>;
443 gpio-controller;
444 #gpio-cells = <2>;
445 interrupt-controller;
446 #interrupt-cells = <2>;
447 clocks = <&pclk>;
448 clock-names = "apb_pclk";
449 };
450
451 i2c1: i2c@10016000 {
452 #address-cells = <1>;
453 #size-cells = <0>;
454 compatible = "arm,versatile-i2c";
455 reg = <0x10016000 0x1000>;
456 };
457
458 rtc: rtc@10017000 {
459 compatible = "arm,pl031", "arm,primecell";
460 reg = <0x10017000 0x1000>;
461 clocks = <&pclk>;
462 clock-names = "apb_pclk";
463 };
464
465 timer45: timer@10018000 {
466 compatible = "arm,sp804", "arm,primecell";
467 reg = <0x10018000 0x1000>;
468 clocks = <&timclk>, <&timclk>, <&pclk>;
469 clock-names = "timerclk4", "timerclk5", "apb_pclk";
470 };
471
472 timer67: timer@10019000 {
473 compatible = "arm,sp804", "arm,primecell";
474 reg = <0x10019000 0x1000>;
475 clocks = <&timclk>, <&timclk>, <&pclk>;
476 clock-names = "timerclk6", "timerclk7", "apb_pclk";
477 };
478
479 sp810_syscon1: sysctl@1001a000 {
480 compatible = "arm,sp810", "arm,primecell";
481 reg = <0x1001a000 0x1000>;
482 clocks = <&refclk32khz>, <&timclk>, <&xtal24mhz>;
483 clock-names = "refclk", "timclk", "apb_pclk";
484 #clock-cells = <1>;
485 clock-output-names = "timerclk4",
486 "timerclk5",
487 "timerclk6",
488 "timerclk7";
489 assigned-clocks = <&sp810_syscon1 0>,
490 <&sp810_syscon1 1>,
491 <&sp810_syscon1 2>,
492 <&sp810_syscon1 3>;
493 assigned-clock-parents = <&timclk>,
494 <&timclk>,
495 <&timclk>,
496 <&timclk>;
497 };
498 };
499
500
501 /* These peripherals are inside the FPGA */
502 fpga {
503 #address-cells = <1>;
504 #size-cells = <1>;
505 compatible = "simple-bus";
506 ranges;
507
508 aaci: aaci@10004000 {
509 compatible = "arm,pl041", "arm,primecell";
510 reg = <0x10004000 0x1000>;
511 clocks = <&pclk>;
512 clock-names = "apb_pclk";
513 };
514
515 mmc: mmcsd@10005000 {
516 compatible = "arm,pl18x", "arm,primecell";
517 reg = <0x10005000 0x1000>;
518
519 /* Due to frequent FIFO overruns, use just 500 kHz */
520 max-frequency = <500000>;
521 bus-width = <4>;
522 cap-sd-highspeed;
523 cap-mmc-highspeed;
524 clocks = <&mclk>, <&pclk>;
525 clock-names = "mclk", "apb_pclk";
526 vmmc-supply = <&vmmc>;
527 cd-gpios = <&gpio2 0 GPIO_ACTIVE_LOW>;
528 wp-gpios = <&gpio2 1 GPIO_ACTIVE_HIGH>;
529 };
530
531 kmi0: kmi@10006000 {
532 compatible = "arm,pl050", "arm,primecell";
533 reg = <0x10006000 0x1000>;
534 clocks = <&kmiclk>, <&pclk>;
535 clock-names = "KMIREFCLK", "apb_pclk";
536 };
537
538 kmi1: kmi@10007000 {
539 compatible = "arm,pl050", "arm,primecell";
540 reg = <0x10007000 0x1000>;
541 clocks = <&kmiclk>, <&pclk>;
542 clock-names = "KMIREFCLK", "apb_pclk";
543 };
544
545 serial3: serial@1000c000 {
546 compatible = "arm,pl011", "arm,primecell";
547 reg = <0x1000c000 0x1000>;
548 clocks = <&uartclk>, <&pclk>;
549 clock-names = "uartclk", "apb_pclk";
550 };
551 };
552
553 /* These peripherals are inside the NEC ISSP */
554 issp {
555 #address-cells = <1>;
556 #size-cells = <1>;
557 compatible = "simple-bus";
558 ranges;
559
560 clcd: clcd@10020000 {
561 compatible = "arm,pl111", "arm,primecell";
562 reg = <0x10020000 0x1000>;
563 interrupt-names = "combined";
564 clocks = <&oscclk4>, <&pclk>;
565 clock-names = "clcdclk", "apb_pclk";
566 /* 1024x768 16bpp @65MHz works fine */
567 max-memory-bandwidth = <95000000>;
568
569 port {
570 clcd_pads: endpoint {
571 remote-endpoint = <&vga_bridge_in>;
572 arm,pl11x,tft-r0g0b0-pads = <0 8 16>;
573 };
574 };
575 };
576 };
577};