Loading...
1/*
2 * htc-i2cpld.c
3 * Chip driver for an unknown CPLD chip found on omap850 HTC devices like
4 * the HTC Wizard and HTC Herald.
5 * The cpld is located on the i2c bus and acts as an input/output GPIO
6 * extender.
7 *
8 * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
9 *
10 * Based on work done in the linwizard project
11 * Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
12 *
13 * This program is free software; you can redistribute it and/or modify
14 * it under the terms of the GNU General Public License as published by
15 * the Free Software Foundation; either version 2 of the License, or
16 * (at your option) any later version.
17 *
18 * This program is distributed in the hope that it will be useful,
19 * but WITHOUT ANY WARRANTY; without even the implied warranty of
20 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
21 * GNU General Public License for more details.
22 *
23 * You should have received a copy of the GNU General Public License
24 * along with this program; if not, write to the Free Software
25 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
26 */
27
28#include <linux/kernel.h>
29#include <linux/init.h>
30#include <linux/module.h>
31#include <linux/interrupt.h>
32#include <linux/platform_device.h>
33#include <linux/i2c.h>
34#include <linux/irq.h>
35#include <linux/spinlock.h>
36#include <linux/htcpld.h>
37#include <linux/gpio.h>
38#include <linux/slab.h>
39
40struct htcpld_chip {
41 spinlock_t lock;
42
43 /* chip info */
44 u8 reset;
45 u8 addr;
46 struct device *dev;
47 struct i2c_client *client;
48
49 /* Output details */
50 u8 cache_out;
51 struct gpio_chip chip_out;
52
53 /* Input details */
54 u8 cache_in;
55 struct gpio_chip chip_in;
56
57 u16 irqs_enabled;
58 uint irq_start;
59 int nirqs;
60
61 unsigned int flow_type;
62 /*
63 * Work structure to allow for setting values outside of any
64 * possible interrupt context
65 */
66 struct work_struct set_val_work;
67};
68
69struct htcpld_data {
70 /* irq info */
71 u16 irqs_enabled;
72 uint irq_start;
73 int nirqs;
74 uint chained_irq;
75 unsigned int int_reset_gpio_hi;
76 unsigned int int_reset_gpio_lo;
77
78 /* htcpld info */
79 struct htcpld_chip *chip;
80 unsigned int nchips;
81};
82
83/* There does not appear to be a way to proactively mask interrupts
84 * on the htcpld chip itself. So, we simply ignore interrupts that
85 * aren't desired. */
86static void htcpld_mask(struct irq_data *data)
87{
88 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
89 chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start));
90 pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled);
91}
92static void htcpld_unmask(struct irq_data *data)
93{
94 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
95 chip->irqs_enabled |= 1 << (data->irq - chip->irq_start);
96 pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled);
97}
98
99static int htcpld_set_type(struct irq_data *data, unsigned int flags)
100{
101 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
102
103 if (flags & ~IRQ_TYPE_SENSE_MASK)
104 return -EINVAL;
105
106 /* We only allow edge triggering */
107 if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
108 return -EINVAL;
109
110 chip->flow_type = flags;
111 return 0;
112}
113
114static struct irq_chip htcpld_muxed_chip = {
115 .name = "htcpld",
116 .irq_mask = htcpld_mask,
117 .irq_unmask = htcpld_unmask,
118 .irq_set_type = htcpld_set_type,
119};
120
121/* To properly dispatch IRQ events, we need to read from the
122 * chip. This is an I2C action that could possibly sleep
123 * (which is bad in interrupt context) -- so we use a threaded
124 * interrupt handler to get around that.
125 */
126static irqreturn_t htcpld_handler(int irq, void *dev)
127{
128 struct htcpld_data *htcpld = dev;
129 unsigned int i;
130 unsigned long flags;
131 int irqpin;
132
133 if (!htcpld) {
134 pr_debug("htcpld is null in ISR\n");
135 return IRQ_HANDLED;
136 }
137
138 /*
139 * For each chip, do a read of the chip and trigger any interrupts
140 * desired. The interrupts will be triggered from LSB to MSB (i.e.
141 * bit 0 first, then bit 1, etc.)
142 *
143 * For chips that have no interrupt range specified, just skip 'em.
144 */
145 for (i = 0; i < htcpld->nchips; i++) {
146 struct htcpld_chip *chip = &htcpld->chip[i];
147 struct i2c_client *client;
148 int val;
149 unsigned long uval, old_val;
150
151 if (!chip) {
152 pr_debug("chip %d is null in ISR\n", i);
153 continue;
154 }
155
156 if (chip->nirqs == 0)
157 continue;
158
159 client = chip->client;
160 if (!client) {
161 pr_debug("client %d is null in ISR\n", i);
162 continue;
163 }
164
165 /* Scan the chip */
166 val = i2c_smbus_read_byte_data(client, chip->cache_out);
167 if (val < 0) {
168 /* Throw a warning and skip this chip */
169 dev_warn(chip->dev, "Unable to read from chip: %d\n",
170 val);
171 continue;
172 }
173
174 uval = (unsigned long)val;
175
176 spin_lock_irqsave(&chip->lock, flags);
177
178 /* Save away the old value so we can compare it */
179 old_val = chip->cache_in;
180
181 /* Write the new value */
182 chip->cache_in = uval;
183
184 spin_unlock_irqrestore(&chip->lock, flags);
185
186 /*
187 * For each bit in the data (starting at bit 0), trigger
188 * associated interrupts.
189 */
190 for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
191 unsigned oldb, newb, type = chip->flow_type;
192
193 irq = chip->irq_start + irqpin;
194
195 /* Run the IRQ handler, but only if the bit value
196 * changed, and the proper flags are set */
197 oldb = (old_val >> irqpin) & 1;
198 newb = (uval >> irqpin) & 1;
199
200 if ((!oldb && newb && (type & IRQ_TYPE_EDGE_RISING)) ||
201 (oldb && !newb && (type & IRQ_TYPE_EDGE_FALLING))) {
202 pr_debug("fire IRQ %d\n", irqpin);
203 generic_handle_irq(irq);
204 }
205 }
206 }
207
208 /*
209 * In order to continue receiving interrupts, the int_reset_gpio must
210 * be asserted.
211 */
212 if (htcpld->int_reset_gpio_hi)
213 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
214 if (htcpld->int_reset_gpio_lo)
215 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
216
217 return IRQ_HANDLED;
218}
219
220/*
221 * The GPIO set routines can be called from interrupt context, especially if,
222 * for example they're attached to the led-gpio framework and a trigger is
223 * enabled. As such, we declared work above in the htcpld_chip structure,
224 * and that work is scheduled in the set routine. The kernel can then run
225 * the I2C functions, which will sleep, in process context.
226 */
227static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
228{
229 struct i2c_client *client;
230 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
231 unsigned long flags;
232
233 client = chip_data->client;
234 if (!client)
235 return;
236
237 spin_lock_irqsave(&chip_data->lock, flags);
238 if (val)
239 chip_data->cache_out |= (1 << offset);
240 else
241 chip_data->cache_out &= ~(1 << offset);
242 spin_unlock_irqrestore(&chip_data->lock, flags);
243
244 schedule_work(&(chip_data->set_val_work));
245}
246
247static void htcpld_chip_set_ni(struct work_struct *work)
248{
249 struct htcpld_chip *chip_data;
250 struct i2c_client *client;
251
252 chip_data = container_of(work, struct htcpld_chip, set_val_work);
253 client = chip_data->client;
254 i2c_smbus_read_byte_data(client, chip_data->cache_out);
255}
256
257static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
258{
259 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
260 u8 cache;
261
262 if (!strncmp(chip->label, "htcpld-out", 10)) {
263 cache = chip_data->cache_out;
264 } else if (!strncmp(chip->label, "htcpld-in", 9)) {
265 cache = chip_data->cache_in;
266 } else
267 return -EINVAL;
268
269 return (cache >> offset) & 1;
270}
271
272static int htcpld_direction_output(struct gpio_chip *chip,
273 unsigned offset, int value)
274{
275 htcpld_chip_set(chip, offset, value);
276 return 0;
277}
278
279static int htcpld_direction_input(struct gpio_chip *chip,
280 unsigned offset)
281{
282 /*
283 * No-op: this function can only be called on the input chip.
284 * We do however make sure the offset is within range.
285 */
286 return (offset < chip->ngpio) ? 0 : -EINVAL;
287}
288
289static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
290{
291 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
292
293 if (offset < chip_data->nirqs)
294 return chip_data->irq_start + offset;
295 else
296 return -EINVAL;
297}
298
299static void htcpld_chip_reset(struct i2c_client *client)
300{
301 struct htcpld_chip *chip_data = i2c_get_clientdata(client);
302 if (!chip_data)
303 return;
304
305 i2c_smbus_read_byte_data(
306 client, (chip_data->cache_out = chip_data->reset));
307}
308
309static int htcpld_setup_chip_irq(
310 struct platform_device *pdev,
311 int chip_index)
312{
313 struct htcpld_data *htcpld;
314 struct htcpld_chip *chip;
315 unsigned int irq, irq_end;
316
317 /* Get the platform and driver data */
318 htcpld = platform_get_drvdata(pdev);
319 chip = &htcpld->chip[chip_index];
320
321 /* Setup irq handlers */
322 irq_end = chip->irq_start + chip->nirqs;
323 for (irq = chip->irq_start; irq < irq_end; irq++) {
324 irq_set_chip_and_handler(irq, &htcpld_muxed_chip,
325 handle_simple_irq);
326 irq_set_chip_data(irq, chip);
327 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
328 }
329
330 return 0;
331}
332
333static int htcpld_register_chip_i2c(
334 struct platform_device *pdev,
335 int chip_index)
336{
337 struct htcpld_data *htcpld;
338 struct device *dev = &pdev->dev;
339 struct htcpld_core_platform_data *pdata;
340 struct htcpld_chip *chip;
341 struct htcpld_chip_platform_data *plat_chip_data;
342 struct i2c_adapter *adapter;
343 struct i2c_client *client;
344 struct i2c_board_info info;
345
346 /* Get the platform and driver data */
347 pdata = dev_get_platdata(dev);
348 htcpld = platform_get_drvdata(pdev);
349 chip = &htcpld->chip[chip_index];
350 plat_chip_data = &pdata->chip[chip_index];
351
352 adapter = i2c_get_adapter(pdata->i2c_adapter_id);
353 if (!adapter) {
354 /* Eek, no such I2C adapter! Bail out. */
355 dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
356 plat_chip_data->addr, pdata->i2c_adapter_id);
357 return -ENODEV;
358 }
359
360 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
361 dev_warn(dev, "i2c adapter %d non-functional\n",
362 pdata->i2c_adapter_id);
363 return -EINVAL;
364 }
365
366 memset(&info, 0, sizeof(struct i2c_board_info));
367 info.addr = plat_chip_data->addr;
368 strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
369 info.platform_data = chip;
370
371 /* Add the I2C device. This calls the probe() function. */
372 client = i2c_new_device(adapter, &info);
373 if (!client) {
374 /* I2C device registration failed, contineu with the next */
375 dev_warn(dev, "Unable to add I2C device for 0x%x\n",
376 plat_chip_data->addr);
377 return -ENODEV;
378 }
379
380 i2c_set_clientdata(client, chip);
381 snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
382 chip->client = client;
383
384 /* Reset the chip */
385 htcpld_chip_reset(client);
386 chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
387
388 return 0;
389}
390
391static void htcpld_unregister_chip_i2c(
392 struct platform_device *pdev,
393 int chip_index)
394{
395 struct htcpld_data *htcpld;
396 struct htcpld_chip *chip;
397
398 /* Get the platform and driver data */
399 htcpld = platform_get_drvdata(pdev);
400 chip = &htcpld->chip[chip_index];
401
402 if (chip->client)
403 i2c_unregister_device(chip->client);
404}
405
406static int htcpld_register_chip_gpio(
407 struct platform_device *pdev,
408 int chip_index)
409{
410 struct htcpld_data *htcpld;
411 struct device *dev = &pdev->dev;
412 struct htcpld_core_platform_data *pdata;
413 struct htcpld_chip *chip;
414 struct htcpld_chip_platform_data *plat_chip_data;
415 struct gpio_chip *gpio_chip;
416 int ret = 0;
417
418 /* Get the platform and driver data */
419 pdata = dev_get_platdata(dev);
420 htcpld = platform_get_drvdata(pdev);
421 chip = &htcpld->chip[chip_index];
422 plat_chip_data = &pdata->chip[chip_index];
423
424 /* Setup the GPIO chips */
425 gpio_chip = &(chip->chip_out);
426 gpio_chip->label = "htcpld-out";
427 gpio_chip->parent = dev;
428 gpio_chip->owner = THIS_MODULE;
429 gpio_chip->get = htcpld_chip_get;
430 gpio_chip->set = htcpld_chip_set;
431 gpio_chip->direction_input = NULL;
432 gpio_chip->direction_output = htcpld_direction_output;
433 gpio_chip->base = plat_chip_data->gpio_out_base;
434 gpio_chip->ngpio = plat_chip_data->num_gpios;
435
436 gpio_chip = &(chip->chip_in);
437 gpio_chip->label = "htcpld-in";
438 gpio_chip->parent = dev;
439 gpio_chip->owner = THIS_MODULE;
440 gpio_chip->get = htcpld_chip_get;
441 gpio_chip->set = NULL;
442 gpio_chip->direction_input = htcpld_direction_input;
443 gpio_chip->direction_output = NULL;
444 gpio_chip->to_irq = htcpld_chip_to_irq;
445 gpio_chip->base = plat_chip_data->gpio_in_base;
446 gpio_chip->ngpio = plat_chip_data->num_gpios;
447
448 /* Add the GPIO chips */
449 ret = gpiochip_add_data(&(chip->chip_out), chip);
450 if (ret) {
451 dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
452 plat_chip_data->addr, ret);
453 return ret;
454 }
455
456 ret = gpiochip_add_data(&(chip->chip_in), chip);
457 if (ret) {
458 dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
459 plat_chip_data->addr, ret);
460 gpiochip_remove(&(chip->chip_out));
461 return ret;
462 }
463
464 return 0;
465}
466
467static int htcpld_setup_chips(struct platform_device *pdev)
468{
469 struct htcpld_data *htcpld;
470 struct device *dev = &pdev->dev;
471 struct htcpld_core_platform_data *pdata;
472 int i;
473
474 /* Get the platform and driver data */
475 pdata = dev_get_platdata(dev);
476 htcpld = platform_get_drvdata(pdev);
477
478 /* Setup each chip's output GPIOs */
479 htcpld->nchips = pdata->num_chip;
480 htcpld->chip = devm_kzalloc(dev, sizeof(struct htcpld_chip) * htcpld->nchips,
481 GFP_KERNEL);
482 if (!htcpld->chip) {
483 dev_warn(dev, "Unable to allocate memory for chips\n");
484 return -ENOMEM;
485 }
486
487 /* Add the chips as best we can */
488 for (i = 0; i < htcpld->nchips; i++) {
489 int ret;
490
491 /* Setup the HTCPLD chips */
492 htcpld->chip[i].reset = pdata->chip[i].reset;
493 htcpld->chip[i].cache_out = pdata->chip[i].reset;
494 htcpld->chip[i].cache_in = 0;
495 htcpld->chip[i].dev = dev;
496 htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
497 htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
498
499 INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
500 spin_lock_init(&(htcpld->chip[i].lock));
501
502 /* Setup the interrupts for the chip */
503 if (htcpld->chained_irq) {
504 ret = htcpld_setup_chip_irq(pdev, i);
505 if (ret)
506 continue;
507 }
508
509 /* Register the chip with I2C */
510 ret = htcpld_register_chip_i2c(pdev, i);
511 if (ret)
512 continue;
513
514
515 /* Register the chips with the GPIO subsystem */
516 ret = htcpld_register_chip_gpio(pdev, i);
517 if (ret) {
518 /* Unregister the chip from i2c and continue */
519 htcpld_unregister_chip_i2c(pdev, i);
520 continue;
521 }
522
523 dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
524 }
525
526 return 0;
527}
528
529static int htcpld_core_probe(struct platform_device *pdev)
530{
531 struct htcpld_data *htcpld;
532 struct device *dev = &pdev->dev;
533 struct htcpld_core_platform_data *pdata;
534 struct resource *res;
535 int ret = 0;
536
537 if (!dev)
538 return -ENODEV;
539
540 pdata = dev_get_platdata(dev);
541 if (!pdata) {
542 dev_warn(dev, "Platform data not found for htcpld core!\n");
543 return -ENXIO;
544 }
545
546 htcpld = devm_kzalloc(dev, sizeof(struct htcpld_data), GFP_KERNEL);
547 if (!htcpld)
548 return -ENOMEM;
549
550 /* Find chained irq */
551 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
552 if (res) {
553 int flags;
554 htcpld->chained_irq = res->start;
555
556 /* Setup the chained interrupt handler */
557 flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
558 IRQF_ONESHOT;
559 ret = request_threaded_irq(htcpld->chained_irq,
560 NULL, htcpld_handler,
561 flags, pdev->name, htcpld);
562 if (ret) {
563 dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
564 return ret;
565 } else
566 device_init_wakeup(dev, 0);
567 }
568
569 /* Set the driver data */
570 platform_set_drvdata(pdev, htcpld);
571
572 /* Setup the htcpld chips */
573 ret = htcpld_setup_chips(pdev);
574 if (ret)
575 return ret;
576
577 /* Request the GPIO(s) for the int reset and set them up */
578 if (pdata->int_reset_gpio_hi) {
579 ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
580 if (ret) {
581 /*
582 * If it failed, that sucks, but we can probably
583 * continue on without it.
584 */
585 dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
586 htcpld->int_reset_gpio_hi = 0;
587 } else {
588 htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
589 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
590 }
591 }
592
593 if (pdata->int_reset_gpio_lo) {
594 ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
595 if (ret) {
596 /*
597 * If it failed, that sucks, but we can probably
598 * continue on without it.
599 */
600 dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
601 htcpld->int_reset_gpio_lo = 0;
602 } else {
603 htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
604 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
605 }
606 }
607
608 dev_info(dev, "Initialized successfully\n");
609 return 0;
610}
611
612/* The I2C Driver -- used internally */
613static const struct i2c_device_id htcpld_chip_id[] = {
614 { "htcpld-chip", 0 },
615 { }
616};
617MODULE_DEVICE_TABLE(i2c, htcpld_chip_id);
618
619
620static struct i2c_driver htcpld_chip_driver = {
621 .driver = {
622 .name = "htcpld-chip",
623 },
624 .id_table = htcpld_chip_id,
625};
626
627/* The Core Driver */
628static struct platform_driver htcpld_core_driver = {
629 .driver = {
630 .name = "i2c-htcpld",
631 },
632};
633
634static int __init htcpld_core_init(void)
635{
636 int ret;
637
638 /* Register the I2C Chip driver */
639 ret = i2c_add_driver(&htcpld_chip_driver);
640 if (ret)
641 return ret;
642
643 /* Probe for our chips */
644 return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
645}
646
647static void __exit htcpld_core_exit(void)
648{
649 i2c_del_driver(&htcpld_chip_driver);
650 platform_driver_unregister(&htcpld_core_driver);
651}
652
653module_init(htcpld_core_init);
654module_exit(htcpld_core_exit);
655
656MODULE_AUTHOR("Cory Maccarrone <darkstar6262@gmail.com>");
657MODULE_DESCRIPTION("I2C HTC PLD Driver");
658MODULE_LICENSE("GPL");
659
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * htc-i2cpld.c
4 * Chip driver for an unknown CPLD chip found on omap850 HTC devices like
5 * the HTC Wizard and HTC Herald.
6 * The cpld is located on the i2c bus and acts as an input/output GPIO
7 * extender.
8 *
9 * Copyright (C) 2009 Cory Maccarrone <darkstar6262@gmail.com>
10 *
11 * Based on work done in the linwizard project
12 * Copyright (C) 2008-2009 Angelo Arrifano <miknix@gmail.com>
13 */
14
15#include <linux/kernel.h>
16#include <linux/init.h>
17#include <linux/interrupt.h>
18#include <linux/platform_device.h>
19#include <linux/i2c.h>
20#include <linux/irq.h>
21#include <linux/spinlock.h>
22#include <linux/htcpld.h>
23#include <linux/gpio.h>
24#include <linux/slab.h>
25
26struct htcpld_chip {
27 spinlock_t lock;
28
29 /* chip info */
30 u8 reset;
31 u8 addr;
32 struct device *dev;
33 struct i2c_client *client;
34
35 /* Output details */
36 u8 cache_out;
37 struct gpio_chip chip_out;
38
39 /* Input details */
40 u8 cache_in;
41 struct gpio_chip chip_in;
42
43 u16 irqs_enabled;
44 uint irq_start;
45 int nirqs;
46
47 unsigned int flow_type;
48 /*
49 * Work structure to allow for setting values outside of any
50 * possible interrupt context
51 */
52 struct work_struct set_val_work;
53};
54
55struct htcpld_data {
56 /* irq info */
57 u16 irqs_enabled;
58 uint irq_start;
59 int nirqs;
60 uint chained_irq;
61 unsigned int int_reset_gpio_hi;
62 unsigned int int_reset_gpio_lo;
63
64 /* htcpld info */
65 struct htcpld_chip *chip;
66 unsigned int nchips;
67};
68
69/* There does not appear to be a way to proactively mask interrupts
70 * on the htcpld chip itself. So, we simply ignore interrupts that
71 * aren't desired. */
72static void htcpld_mask(struct irq_data *data)
73{
74 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
75 chip->irqs_enabled &= ~(1 << (data->irq - chip->irq_start));
76 pr_debug("HTCPLD mask %d %04x\n", data->irq, chip->irqs_enabled);
77}
78static void htcpld_unmask(struct irq_data *data)
79{
80 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
81 chip->irqs_enabled |= 1 << (data->irq - chip->irq_start);
82 pr_debug("HTCPLD unmask %d %04x\n", data->irq, chip->irqs_enabled);
83}
84
85static int htcpld_set_type(struct irq_data *data, unsigned int flags)
86{
87 struct htcpld_chip *chip = irq_data_get_irq_chip_data(data);
88
89 if (flags & ~IRQ_TYPE_SENSE_MASK)
90 return -EINVAL;
91
92 /* We only allow edge triggering */
93 if (flags & (IRQ_TYPE_LEVEL_LOW|IRQ_TYPE_LEVEL_HIGH))
94 return -EINVAL;
95
96 chip->flow_type = flags;
97 return 0;
98}
99
100static struct irq_chip htcpld_muxed_chip = {
101 .name = "htcpld",
102 .irq_mask = htcpld_mask,
103 .irq_unmask = htcpld_unmask,
104 .irq_set_type = htcpld_set_type,
105};
106
107/* To properly dispatch IRQ events, we need to read from the
108 * chip. This is an I2C action that could possibly sleep
109 * (which is bad in interrupt context) -- so we use a threaded
110 * interrupt handler to get around that.
111 */
112static irqreturn_t htcpld_handler(int irq, void *dev)
113{
114 struct htcpld_data *htcpld = dev;
115 unsigned int i;
116 unsigned long flags;
117 int irqpin;
118
119 if (!htcpld) {
120 pr_debug("htcpld is null in ISR\n");
121 return IRQ_HANDLED;
122 }
123
124 /*
125 * For each chip, do a read of the chip and trigger any interrupts
126 * desired. The interrupts will be triggered from LSB to MSB (i.e.
127 * bit 0 first, then bit 1, etc.)
128 *
129 * For chips that have no interrupt range specified, just skip 'em.
130 */
131 for (i = 0; i < htcpld->nchips; i++) {
132 struct htcpld_chip *chip = &htcpld->chip[i];
133 struct i2c_client *client;
134 int val;
135 unsigned long uval, old_val;
136
137 if (!chip) {
138 pr_debug("chip %d is null in ISR\n", i);
139 continue;
140 }
141
142 if (chip->nirqs == 0)
143 continue;
144
145 client = chip->client;
146 if (!client) {
147 pr_debug("client %d is null in ISR\n", i);
148 continue;
149 }
150
151 /* Scan the chip */
152 val = i2c_smbus_read_byte_data(client, chip->cache_out);
153 if (val < 0) {
154 /* Throw a warning and skip this chip */
155 dev_warn(chip->dev, "Unable to read from chip: %d\n",
156 val);
157 continue;
158 }
159
160 uval = (unsigned long)val;
161
162 spin_lock_irqsave(&chip->lock, flags);
163
164 /* Save away the old value so we can compare it */
165 old_val = chip->cache_in;
166
167 /* Write the new value */
168 chip->cache_in = uval;
169
170 spin_unlock_irqrestore(&chip->lock, flags);
171
172 /*
173 * For each bit in the data (starting at bit 0), trigger
174 * associated interrupts.
175 */
176 for (irqpin = 0; irqpin < chip->nirqs; irqpin++) {
177 unsigned oldb, newb, type = chip->flow_type;
178
179 irq = chip->irq_start + irqpin;
180
181 /* Run the IRQ handler, but only if the bit value
182 * changed, and the proper flags are set */
183 oldb = (old_val >> irqpin) & 1;
184 newb = (uval >> irqpin) & 1;
185
186 if ((!oldb && newb && (type & IRQ_TYPE_EDGE_RISING)) ||
187 (oldb && !newb && (type & IRQ_TYPE_EDGE_FALLING))) {
188 pr_debug("fire IRQ %d\n", irqpin);
189 generic_handle_irq(irq);
190 }
191 }
192 }
193
194 /*
195 * In order to continue receiving interrupts, the int_reset_gpio must
196 * be asserted.
197 */
198 if (htcpld->int_reset_gpio_hi)
199 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
200 if (htcpld->int_reset_gpio_lo)
201 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
202
203 return IRQ_HANDLED;
204}
205
206/*
207 * The GPIO set routines can be called from interrupt context, especially if,
208 * for example they're attached to the led-gpio framework and a trigger is
209 * enabled. As such, we declared work above in the htcpld_chip structure,
210 * and that work is scheduled in the set routine. The kernel can then run
211 * the I2C functions, which will sleep, in process context.
212 */
213static void htcpld_chip_set(struct gpio_chip *chip, unsigned offset, int val)
214{
215 struct i2c_client *client;
216 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
217 unsigned long flags;
218
219 client = chip_data->client;
220 if (!client)
221 return;
222
223 spin_lock_irqsave(&chip_data->lock, flags);
224 if (val)
225 chip_data->cache_out |= (1 << offset);
226 else
227 chip_data->cache_out &= ~(1 << offset);
228 spin_unlock_irqrestore(&chip_data->lock, flags);
229
230 schedule_work(&(chip_data->set_val_work));
231}
232
233static void htcpld_chip_set_ni(struct work_struct *work)
234{
235 struct htcpld_chip *chip_data;
236 struct i2c_client *client;
237
238 chip_data = container_of(work, struct htcpld_chip, set_val_work);
239 client = chip_data->client;
240 i2c_smbus_read_byte_data(client, chip_data->cache_out);
241}
242
243static int htcpld_chip_get(struct gpio_chip *chip, unsigned offset)
244{
245 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
246 u8 cache;
247
248 if (!strncmp(chip->label, "htcpld-out", 10)) {
249 cache = chip_data->cache_out;
250 } else if (!strncmp(chip->label, "htcpld-in", 9)) {
251 cache = chip_data->cache_in;
252 } else
253 return -EINVAL;
254
255 return (cache >> offset) & 1;
256}
257
258static int htcpld_direction_output(struct gpio_chip *chip,
259 unsigned offset, int value)
260{
261 htcpld_chip_set(chip, offset, value);
262 return 0;
263}
264
265static int htcpld_direction_input(struct gpio_chip *chip,
266 unsigned offset)
267{
268 /*
269 * No-op: this function can only be called on the input chip.
270 * We do however make sure the offset is within range.
271 */
272 return (offset < chip->ngpio) ? 0 : -EINVAL;
273}
274
275static int htcpld_chip_to_irq(struct gpio_chip *chip, unsigned offset)
276{
277 struct htcpld_chip *chip_data = gpiochip_get_data(chip);
278
279 if (offset < chip_data->nirqs)
280 return chip_data->irq_start + offset;
281 else
282 return -EINVAL;
283}
284
285static void htcpld_chip_reset(struct i2c_client *client)
286{
287 struct htcpld_chip *chip_data = i2c_get_clientdata(client);
288 if (!chip_data)
289 return;
290
291 i2c_smbus_read_byte_data(
292 client, (chip_data->cache_out = chip_data->reset));
293}
294
295static int htcpld_setup_chip_irq(
296 struct platform_device *pdev,
297 int chip_index)
298{
299 struct htcpld_data *htcpld;
300 struct htcpld_chip *chip;
301 unsigned int irq, irq_end;
302
303 /* Get the platform and driver data */
304 htcpld = platform_get_drvdata(pdev);
305 chip = &htcpld->chip[chip_index];
306
307 /* Setup irq handlers */
308 irq_end = chip->irq_start + chip->nirqs;
309 for (irq = chip->irq_start; irq < irq_end; irq++) {
310 irq_set_chip_and_handler(irq, &htcpld_muxed_chip,
311 handle_simple_irq);
312 irq_set_chip_data(irq, chip);
313 irq_clear_status_flags(irq, IRQ_NOREQUEST | IRQ_NOPROBE);
314 }
315
316 return 0;
317}
318
319static int htcpld_register_chip_i2c(
320 struct platform_device *pdev,
321 int chip_index)
322{
323 struct htcpld_data *htcpld;
324 struct device *dev = &pdev->dev;
325 struct htcpld_core_platform_data *pdata;
326 struct htcpld_chip *chip;
327 struct htcpld_chip_platform_data *plat_chip_data;
328 struct i2c_adapter *adapter;
329 struct i2c_client *client;
330 struct i2c_board_info info;
331
332 /* Get the platform and driver data */
333 pdata = dev_get_platdata(dev);
334 htcpld = platform_get_drvdata(pdev);
335 chip = &htcpld->chip[chip_index];
336 plat_chip_data = &pdata->chip[chip_index];
337
338 adapter = i2c_get_adapter(pdata->i2c_adapter_id);
339 if (!adapter) {
340 /* Eek, no such I2C adapter! Bail out. */
341 dev_warn(dev, "Chip at i2c address 0x%x: Invalid i2c adapter %d\n",
342 plat_chip_data->addr, pdata->i2c_adapter_id);
343 return -ENODEV;
344 }
345
346 if (!i2c_check_functionality(adapter, I2C_FUNC_SMBUS_READ_BYTE_DATA)) {
347 dev_warn(dev, "i2c adapter %d non-functional\n",
348 pdata->i2c_adapter_id);
349 return -EINVAL;
350 }
351
352 memset(&info, 0, sizeof(struct i2c_board_info));
353 info.addr = plat_chip_data->addr;
354 strlcpy(info.type, "htcpld-chip", I2C_NAME_SIZE);
355 info.platform_data = chip;
356
357 /* Add the I2C device. This calls the probe() function. */
358 client = i2c_new_device(adapter, &info);
359 if (!client) {
360 /* I2C device registration failed, contineu with the next */
361 dev_warn(dev, "Unable to add I2C device for 0x%x\n",
362 plat_chip_data->addr);
363 return -ENODEV;
364 }
365
366 i2c_set_clientdata(client, chip);
367 snprintf(client->name, I2C_NAME_SIZE, "Chip_0x%x", client->addr);
368 chip->client = client;
369
370 /* Reset the chip */
371 htcpld_chip_reset(client);
372 chip->cache_in = i2c_smbus_read_byte_data(client, chip->cache_out);
373
374 return 0;
375}
376
377static void htcpld_unregister_chip_i2c(
378 struct platform_device *pdev,
379 int chip_index)
380{
381 struct htcpld_data *htcpld;
382 struct htcpld_chip *chip;
383
384 /* Get the platform and driver data */
385 htcpld = platform_get_drvdata(pdev);
386 chip = &htcpld->chip[chip_index];
387
388 i2c_unregister_device(chip->client);
389}
390
391static int htcpld_register_chip_gpio(
392 struct platform_device *pdev,
393 int chip_index)
394{
395 struct htcpld_data *htcpld;
396 struct device *dev = &pdev->dev;
397 struct htcpld_core_platform_data *pdata;
398 struct htcpld_chip *chip;
399 struct htcpld_chip_platform_data *plat_chip_data;
400 struct gpio_chip *gpio_chip;
401 int ret = 0;
402
403 /* Get the platform and driver data */
404 pdata = dev_get_platdata(dev);
405 htcpld = platform_get_drvdata(pdev);
406 chip = &htcpld->chip[chip_index];
407 plat_chip_data = &pdata->chip[chip_index];
408
409 /* Setup the GPIO chips */
410 gpio_chip = &(chip->chip_out);
411 gpio_chip->label = "htcpld-out";
412 gpio_chip->parent = dev;
413 gpio_chip->owner = THIS_MODULE;
414 gpio_chip->get = htcpld_chip_get;
415 gpio_chip->set = htcpld_chip_set;
416 gpio_chip->direction_input = NULL;
417 gpio_chip->direction_output = htcpld_direction_output;
418 gpio_chip->base = plat_chip_data->gpio_out_base;
419 gpio_chip->ngpio = plat_chip_data->num_gpios;
420
421 gpio_chip = &(chip->chip_in);
422 gpio_chip->label = "htcpld-in";
423 gpio_chip->parent = dev;
424 gpio_chip->owner = THIS_MODULE;
425 gpio_chip->get = htcpld_chip_get;
426 gpio_chip->set = NULL;
427 gpio_chip->direction_input = htcpld_direction_input;
428 gpio_chip->direction_output = NULL;
429 gpio_chip->to_irq = htcpld_chip_to_irq;
430 gpio_chip->base = plat_chip_data->gpio_in_base;
431 gpio_chip->ngpio = plat_chip_data->num_gpios;
432
433 /* Add the GPIO chips */
434 ret = gpiochip_add_data(&(chip->chip_out), chip);
435 if (ret) {
436 dev_warn(dev, "Unable to register output GPIOs for 0x%x: %d\n",
437 plat_chip_data->addr, ret);
438 return ret;
439 }
440
441 ret = gpiochip_add_data(&(chip->chip_in), chip);
442 if (ret) {
443 dev_warn(dev, "Unable to register input GPIOs for 0x%x: %d\n",
444 plat_chip_data->addr, ret);
445 gpiochip_remove(&(chip->chip_out));
446 return ret;
447 }
448
449 return 0;
450}
451
452static int htcpld_setup_chips(struct platform_device *pdev)
453{
454 struct htcpld_data *htcpld;
455 struct device *dev = &pdev->dev;
456 struct htcpld_core_platform_data *pdata;
457 int i;
458
459 /* Get the platform and driver data */
460 pdata = dev_get_platdata(dev);
461 htcpld = platform_get_drvdata(pdev);
462
463 /* Setup each chip's output GPIOs */
464 htcpld->nchips = pdata->num_chip;
465 htcpld->chip = devm_kcalloc(dev,
466 htcpld->nchips,
467 sizeof(struct htcpld_chip),
468 GFP_KERNEL);
469 if (!htcpld->chip)
470 return -ENOMEM;
471
472 /* Add the chips as best we can */
473 for (i = 0; i < htcpld->nchips; i++) {
474 int ret;
475
476 /* Setup the HTCPLD chips */
477 htcpld->chip[i].reset = pdata->chip[i].reset;
478 htcpld->chip[i].cache_out = pdata->chip[i].reset;
479 htcpld->chip[i].cache_in = 0;
480 htcpld->chip[i].dev = dev;
481 htcpld->chip[i].irq_start = pdata->chip[i].irq_base;
482 htcpld->chip[i].nirqs = pdata->chip[i].num_irqs;
483
484 INIT_WORK(&(htcpld->chip[i].set_val_work), &htcpld_chip_set_ni);
485 spin_lock_init(&(htcpld->chip[i].lock));
486
487 /* Setup the interrupts for the chip */
488 if (htcpld->chained_irq) {
489 ret = htcpld_setup_chip_irq(pdev, i);
490 if (ret)
491 continue;
492 }
493
494 /* Register the chip with I2C */
495 ret = htcpld_register_chip_i2c(pdev, i);
496 if (ret)
497 continue;
498
499
500 /* Register the chips with the GPIO subsystem */
501 ret = htcpld_register_chip_gpio(pdev, i);
502 if (ret) {
503 /* Unregister the chip from i2c and continue */
504 htcpld_unregister_chip_i2c(pdev, i);
505 continue;
506 }
507
508 dev_info(dev, "Registered chip at 0x%x\n", pdata->chip[i].addr);
509 }
510
511 return 0;
512}
513
514static int htcpld_core_probe(struct platform_device *pdev)
515{
516 struct htcpld_data *htcpld;
517 struct device *dev = &pdev->dev;
518 struct htcpld_core_platform_data *pdata;
519 struct resource *res;
520 int ret = 0;
521
522 if (!dev)
523 return -ENODEV;
524
525 pdata = dev_get_platdata(dev);
526 if (!pdata) {
527 dev_warn(dev, "Platform data not found for htcpld core!\n");
528 return -ENXIO;
529 }
530
531 htcpld = devm_kzalloc(dev, sizeof(struct htcpld_data), GFP_KERNEL);
532 if (!htcpld)
533 return -ENOMEM;
534
535 /* Find chained irq */
536 res = platform_get_resource(pdev, IORESOURCE_IRQ, 0);
537 if (res) {
538 int flags;
539 htcpld->chained_irq = res->start;
540
541 /* Setup the chained interrupt handler */
542 flags = IRQF_TRIGGER_FALLING | IRQF_TRIGGER_RISING |
543 IRQF_ONESHOT;
544 ret = request_threaded_irq(htcpld->chained_irq,
545 NULL, htcpld_handler,
546 flags, pdev->name, htcpld);
547 if (ret) {
548 dev_warn(dev, "Unable to setup chained irq handler: %d\n", ret);
549 return ret;
550 } else
551 device_init_wakeup(dev, 0);
552 }
553
554 /* Set the driver data */
555 platform_set_drvdata(pdev, htcpld);
556
557 /* Setup the htcpld chips */
558 ret = htcpld_setup_chips(pdev);
559 if (ret)
560 return ret;
561
562 /* Request the GPIO(s) for the int reset and set them up */
563 if (pdata->int_reset_gpio_hi) {
564 ret = gpio_request(pdata->int_reset_gpio_hi, "htcpld-core");
565 if (ret) {
566 /*
567 * If it failed, that sucks, but we can probably
568 * continue on without it.
569 */
570 dev_warn(dev, "Unable to request int_reset_gpio_hi -- interrupts may not work\n");
571 htcpld->int_reset_gpio_hi = 0;
572 } else {
573 htcpld->int_reset_gpio_hi = pdata->int_reset_gpio_hi;
574 gpio_set_value(htcpld->int_reset_gpio_hi, 1);
575 }
576 }
577
578 if (pdata->int_reset_gpio_lo) {
579 ret = gpio_request(pdata->int_reset_gpio_lo, "htcpld-core");
580 if (ret) {
581 /*
582 * If it failed, that sucks, but we can probably
583 * continue on without it.
584 */
585 dev_warn(dev, "Unable to request int_reset_gpio_lo -- interrupts may not work\n");
586 htcpld->int_reset_gpio_lo = 0;
587 } else {
588 htcpld->int_reset_gpio_lo = pdata->int_reset_gpio_lo;
589 gpio_set_value(htcpld->int_reset_gpio_lo, 0);
590 }
591 }
592
593 dev_info(dev, "Initialized successfully\n");
594 return 0;
595}
596
597/* The I2C Driver -- used internally */
598static const struct i2c_device_id htcpld_chip_id[] = {
599 { "htcpld-chip", 0 },
600 { }
601};
602
603static struct i2c_driver htcpld_chip_driver = {
604 .driver = {
605 .name = "htcpld-chip",
606 },
607 .id_table = htcpld_chip_id,
608};
609
610/* The Core Driver */
611static struct platform_driver htcpld_core_driver = {
612 .driver = {
613 .name = "i2c-htcpld",
614 },
615};
616
617static int __init htcpld_core_init(void)
618{
619 int ret;
620
621 /* Register the I2C Chip driver */
622 ret = i2c_add_driver(&htcpld_chip_driver);
623 if (ret)
624 return ret;
625
626 /* Probe for our chips */
627 return platform_driver_probe(&htcpld_core_driver, htcpld_core_probe);
628}
629device_initcall(htcpld_core_init);