Loading...
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier PXs2 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/uniphier-gpio.h>
9#include <dt-bindings/thermal/thermal.h>
10
11/ {
12 compatible = "socionext,uniphier-pxs2";
13 #address-cells = <1>;
14 #size-cells = <1>;
15
16 cpus {
17 #address-cells = <1>;
18 #size-cells = <0>;
19
20 cpu0: cpu@0 {
21 device_type = "cpu";
22 compatible = "arm,cortex-a9";
23 reg = <0>;
24 clocks = <&sys_clk 32>;
25 enable-method = "psci";
26 next-level-cache = <&l2>;
27 operating-points-v2 = <&cpu_opp>;
28 #cooling-cells = <2>;
29 };
30
31 cpu1: cpu@1 {
32 device_type = "cpu";
33 compatible = "arm,cortex-a9";
34 reg = <1>;
35 clocks = <&sys_clk 32>;
36 enable-method = "psci";
37 next-level-cache = <&l2>;
38 operating-points-v2 = <&cpu_opp>;
39 };
40
41 cpu2: cpu@2 {
42 device_type = "cpu";
43 compatible = "arm,cortex-a9";
44 reg = <2>;
45 clocks = <&sys_clk 32>;
46 enable-method = "psci";
47 next-level-cache = <&l2>;
48 operating-points-v2 = <&cpu_opp>;
49 };
50
51 cpu3: cpu@3 {
52 device_type = "cpu";
53 compatible = "arm,cortex-a9";
54 reg = <3>;
55 clocks = <&sys_clk 32>;
56 enable-method = "psci";
57 next-level-cache = <&l2>;
58 operating-points-v2 = <&cpu_opp>;
59 };
60 };
61
62 cpu_opp: opp-table {
63 compatible = "operating-points-v2";
64 opp-shared;
65
66 opp-100000000 {
67 opp-hz = /bits/ 64 <100000000>;
68 clock-latency-ns = <300>;
69 };
70 opp-150000000 {
71 opp-hz = /bits/ 64 <150000000>;
72 clock-latency-ns = <300>;
73 };
74 opp-200000000 {
75 opp-hz = /bits/ 64 <200000000>;
76 clock-latency-ns = <300>;
77 };
78 opp-300000000 {
79 opp-hz = /bits/ 64 <300000000>;
80 clock-latency-ns = <300>;
81 };
82 opp-400000000 {
83 opp-hz = /bits/ 64 <400000000>;
84 clock-latency-ns = <300>;
85 };
86 opp-600000000 {
87 opp-hz = /bits/ 64 <600000000>;
88 clock-latency-ns = <300>;
89 };
90 opp-800000000 {
91 opp-hz = /bits/ 64 <800000000>;
92 clock-latency-ns = <300>;
93 };
94 opp-1200000000 {
95 opp-hz = /bits/ 64 <1200000000>;
96 clock-latency-ns = <300>;
97 };
98 };
99
100 psci {
101 compatible = "arm,psci-0.2";
102 method = "smc";
103 };
104
105 clocks {
106 refclk: ref {
107 compatible = "fixed-clock";
108 #clock-cells = <0>;
109 clock-frequency = <25000000>;
110 };
111
112 arm_timer_clk: arm-timer {
113 #clock-cells = <0>;
114 compatible = "fixed-clock";
115 clock-frequency = <50000000>;
116 };
117 };
118
119 thermal-zones {
120 cpu-thermal {
121 polling-delay-passive = <250>; /* 250ms */
122 polling-delay = <1000>; /* 1000ms */
123 thermal-sensors = <&pvtctl>;
124
125 trips {
126 cpu_crit: cpu-crit {
127 temperature = <95000>; /* 95C */
128 hysteresis = <2000>;
129 type = "critical";
130 };
131 cpu_alert: cpu-alert {
132 temperature = <85000>; /* 85C */
133 hysteresis = <2000>;
134 type = "passive";
135 };
136 };
137
138 cooling-maps {
139 map {
140 trip = <&cpu_alert>;
141 cooling-device = <&cpu0
142 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
143 };
144 };
145 };
146 };
147
148 soc {
149 compatible = "simple-bus";
150 #address-cells = <1>;
151 #size-cells = <1>;
152 ranges;
153 interrupt-parent = <&intc>;
154
155 l2: l2-cache@500c0000 {
156 compatible = "socionext,uniphier-system-cache";
157 reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
158 <0x506c0000 0x400>;
159 interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
160 cache-unified;
161 cache-size = <(1280 * 1024)>;
162 cache-sets = <512>;
163 cache-line-size = <128>;
164 cache-level = <2>;
165 };
166
167 serial0: serial@54006800 {
168 compatible = "socionext,uniphier-uart";
169 status = "disabled";
170 reg = <0x54006800 0x40>;
171 interrupts = <0 33 4>;
172 pinctrl-names = "default";
173 pinctrl-0 = <&pinctrl_uart0>;
174 clocks = <&peri_clk 0>;
175 resets = <&peri_rst 0>;
176 };
177
178 serial1: serial@54006900 {
179 compatible = "socionext,uniphier-uart";
180 status = "disabled";
181 reg = <0x54006900 0x40>;
182 interrupts = <0 35 4>;
183 pinctrl-names = "default";
184 pinctrl-0 = <&pinctrl_uart1>;
185 clocks = <&peri_clk 1>;
186 resets = <&peri_rst 1>;
187 };
188
189 serial2: serial@54006a00 {
190 compatible = "socionext,uniphier-uart";
191 status = "disabled";
192 reg = <0x54006a00 0x40>;
193 interrupts = <0 37 4>;
194 pinctrl-names = "default";
195 pinctrl-0 = <&pinctrl_uart2>;
196 clocks = <&peri_clk 2>;
197 resets = <&peri_rst 2>;
198 };
199
200 serial3: serial@54006b00 {
201 compatible = "socionext,uniphier-uart";
202 status = "disabled";
203 reg = <0x54006b00 0x40>;
204 interrupts = <0 177 4>;
205 pinctrl-names = "default";
206 pinctrl-0 = <&pinctrl_uart3>;
207 clocks = <&peri_clk 3>;
208 resets = <&peri_rst 3>;
209 };
210
211 gpio: gpio@55000000 {
212 compatible = "socionext,uniphier-gpio";
213 reg = <0x55000000 0x200>;
214 interrupt-parent = <&aidet>;
215 interrupt-controller;
216 #interrupt-cells = <2>;
217 gpio-controller;
218 #gpio-cells = <2>;
219 gpio-ranges = <&pinctrl 0 0 0>,
220 <&pinctrl 96 0 0>;
221 gpio-ranges-group-names = "gpio_range0",
222 "gpio_range1";
223 ngpios = <232>;
224 socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
225 <21 217 3>;
226 };
227
228 audio@56000000 {
229 compatible = "socionext,uniphier-pxs2-aio";
230 reg = <0x56000000 0x80000>;
231 interrupts = <0 144 4>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_ain1>,
234 <&pinctrl_ain2>,
235 <&pinctrl_ainiec1>,
236 <&pinctrl_aout2>,
237 <&pinctrl_aout3>,
238 <&pinctrl_aoutiec1>,
239 <&pinctrl_aoutiec2>;
240 clock-names = "aio";
241 clocks = <&sys_clk 40>;
242 reset-names = "aio";
243 resets = <&sys_rst 40>;
244 #sound-dai-cells = <1>;
245 socionext,syscon = <&soc_glue>;
246
247 i2s_port0: port@0 {
248 i2s_hdmi: endpoint {
249 };
250 };
251
252 i2s_port1: port@1 {
253 i2s_line: endpoint {
254 };
255 };
256
257 i2s_port2: port@2 {
258 i2s_aux: endpoint {
259 };
260 };
261
262 spdif_port0: port@3 {
263 spdif_hiecout1: endpoint {
264 };
265 };
266
267 spdif_port1: port@4 {
268 spdif_iecout1: endpoint {
269 };
270 };
271
272 comp_spdif_port0: port@5 {
273 comp_spdif_hiecout1: endpoint {
274 };
275 };
276
277 comp_spdif_port1: port@6 {
278 comp_spdif_iecout1: endpoint {
279 };
280 };
281 };
282
283 i2c0: i2c@58780000 {
284 compatible = "socionext,uniphier-fi2c";
285 status = "disabled";
286 reg = <0x58780000 0x80>;
287 #address-cells = <1>;
288 #size-cells = <0>;
289 interrupts = <0 41 4>;
290 pinctrl-names = "default";
291 pinctrl-0 = <&pinctrl_i2c0>;
292 clocks = <&peri_clk 4>;
293 resets = <&peri_rst 4>;
294 clock-frequency = <100000>;
295 };
296
297 i2c1: i2c@58781000 {
298 compatible = "socionext,uniphier-fi2c";
299 status = "disabled";
300 reg = <0x58781000 0x80>;
301 #address-cells = <1>;
302 #size-cells = <0>;
303 interrupts = <0 42 4>;
304 pinctrl-names = "default";
305 pinctrl-0 = <&pinctrl_i2c1>;
306 clocks = <&peri_clk 5>;
307 resets = <&peri_rst 5>;
308 clock-frequency = <100000>;
309 };
310
311 i2c2: i2c@58782000 {
312 compatible = "socionext,uniphier-fi2c";
313 status = "disabled";
314 reg = <0x58782000 0x80>;
315 #address-cells = <1>;
316 #size-cells = <0>;
317 interrupts = <0 43 4>;
318 pinctrl-names = "default";
319 pinctrl-0 = <&pinctrl_i2c2>;
320 clocks = <&peri_clk 6>;
321 resets = <&peri_rst 6>;
322 clock-frequency = <100000>;
323 };
324
325 i2c3: i2c@58783000 {
326 compatible = "socionext,uniphier-fi2c";
327 status = "disabled";
328 reg = <0x58783000 0x80>;
329 #address-cells = <1>;
330 #size-cells = <0>;
331 interrupts = <0 44 4>;
332 pinctrl-names = "default";
333 pinctrl-0 = <&pinctrl_i2c3>;
334 clocks = <&peri_clk 7>;
335 resets = <&peri_rst 7>;
336 clock-frequency = <100000>;
337 };
338
339 /* chip-internal connection for DMD */
340 i2c4: i2c@58784000 {
341 compatible = "socionext,uniphier-fi2c";
342 reg = <0x58784000 0x80>;
343 #address-cells = <1>;
344 #size-cells = <0>;
345 interrupts = <0 45 4>;
346 clocks = <&peri_clk 8>;
347 resets = <&peri_rst 8>;
348 clock-frequency = <400000>;
349 };
350
351 /* chip-internal connection for STM */
352 i2c5: i2c@58785000 {
353 compatible = "socionext,uniphier-fi2c";
354 reg = <0x58785000 0x80>;
355 #address-cells = <1>;
356 #size-cells = <0>;
357 interrupts = <0 25 4>;
358 clocks = <&peri_clk 9>;
359 resets = <&peri_rst 9>;
360 clock-frequency = <400000>;
361 };
362
363 /* chip-internal connection for HDMI */
364 i2c6: i2c@58786000 {
365 compatible = "socionext,uniphier-fi2c";
366 reg = <0x58786000 0x80>;
367 #address-cells = <1>;
368 #size-cells = <0>;
369 interrupts = <0 26 4>;
370 clocks = <&peri_clk 10>;
371 resets = <&peri_rst 10>;
372 clock-frequency = <400000>;
373 };
374
375 system_bus: system-bus@58c00000 {
376 compatible = "socionext,uniphier-system-bus";
377 status = "disabled";
378 reg = <0x58c00000 0x400>;
379 #address-cells = <2>;
380 #size-cells = <1>;
381 pinctrl-names = "default";
382 pinctrl-0 = <&pinctrl_system_bus>;
383 };
384
385 smpctrl@59801000 {
386 compatible = "socionext,uniphier-smpctrl";
387 reg = <0x59801000 0x400>;
388 };
389
390 sdctrl@59810000 {
391 compatible = "socionext,uniphier-pxs2-sdctrl",
392 "simple-mfd", "syscon";
393 reg = <0x59810000 0x400>;
394
395 sd_clk: clock {
396 compatible = "socionext,uniphier-pxs2-sd-clock";
397 #clock-cells = <1>;
398 };
399
400 sd_rst: reset {
401 compatible = "socionext,uniphier-pxs2-sd-reset";
402 #reset-cells = <1>;
403 };
404 };
405
406 perictrl@59820000 {
407 compatible = "socionext,uniphier-pxs2-perictrl",
408 "simple-mfd", "syscon";
409 reg = <0x59820000 0x200>;
410
411 peri_clk: clock {
412 compatible = "socionext,uniphier-pxs2-peri-clock";
413 #clock-cells = <1>;
414 };
415
416 peri_rst: reset {
417 compatible = "socionext,uniphier-pxs2-peri-reset";
418 #reset-cells = <1>;
419 };
420 };
421
422 soc_glue: soc-glue@5f800000 {
423 compatible = "socionext,uniphier-pxs2-soc-glue",
424 "simple-mfd", "syscon";
425 reg = <0x5f800000 0x2000>;
426
427 pinctrl: pinctrl {
428 compatible = "socionext,uniphier-pxs2-pinctrl";
429 };
430 };
431
432 soc-glue@5f900000 {
433 compatible = "socionext,uniphier-pxs2-soc-glue-debug",
434 "simple-mfd";
435 #address-cells = <1>;
436 #size-cells = <1>;
437 ranges = <0 0x5f900000 0x2000>;
438
439 efuse@100 {
440 compatible = "socionext,uniphier-efuse";
441 reg = <0x100 0x28>;
442 };
443
444 efuse@200 {
445 compatible = "socionext,uniphier-efuse";
446 reg = <0x200 0x58>;
447 };
448 };
449
450 aidet: aidet@5fc20000 {
451 compatible = "socionext,uniphier-pxs2-aidet";
452 reg = <0x5fc20000 0x200>;
453 interrupt-controller;
454 #interrupt-cells = <2>;
455 };
456
457 timer@60000200 {
458 compatible = "arm,cortex-a9-global-timer";
459 reg = <0x60000200 0x20>;
460 interrupts = <1 11 0xf04>;
461 clocks = <&arm_timer_clk>;
462 };
463
464 timer@60000600 {
465 compatible = "arm,cortex-a9-twd-timer";
466 reg = <0x60000600 0x20>;
467 interrupts = <1 13 0xf04>;
468 clocks = <&arm_timer_clk>;
469 };
470
471 intc: interrupt-controller@60001000 {
472 compatible = "arm,cortex-a9-gic";
473 reg = <0x60001000 0x1000>,
474 <0x60000100 0x100>;
475 #interrupt-cells = <3>;
476 interrupt-controller;
477 };
478
479 sysctrl@61840000 {
480 compatible = "socionext,uniphier-pxs2-sysctrl",
481 "simple-mfd", "syscon";
482 reg = <0x61840000 0x10000>;
483
484 sys_clk: clock {
485 compatible = "socionext,uniphier-pxs2-clock";
486 #clock-cells = <1>;
487 };
488
489 sys_rst: reset {
490 compatible = "socionext,uniphier-pxs2-reset";
491 #reset-cells = <1>;
492 };
493
494 pvtctl: pvtctl {
495 compatible = "socionext,uniphier-pxs2-thermal";
496 interrupts = <0 3 4>;
497 #thermal-sensor-cells = <0>;
498 socionext,tmod-calibration = <0x0f86 0x6844>;
499 };
500 };
501
502 eth: ethernet@65000000 {
503 compatible = "socionext,uniphier-pxs2-ave4";
504 status = "disabled";
505 reg = <0x65000000 0x8500>;
506 interrupts = <0 66 4>;
507 pinctrl-names = "default";
508 pinctrl-0 = <&pinctrl_ether_rgmii>;
509 clocks = <&sys_clk 6>;
510 resets = <&sys_rst 6>;
511 phy-mode = "rgmii";
512 local-mac-address = [00 00 00 00 00 00];
513
514 mdio: mdio {
515 #address-cells = <1>;
516 #size-cells = <0>;
517 };
518 };
519
520 nand: nand@68000000 {
521 compatible = "socionext,uniphier-denali-nand-v5b";
522 status = "disabled";
523 reg-names = "nand_data", "denali_reg";
524 reg = <0x68000000 0x20>, <0x68100000 0x1000>;
525 interrupts = <0 65 4>;
526 pinctrl-names = "default";
527 pinctrl-0 = <&pinctrl_nand2cs>;
528 clocks = <&sys_clk 2>;
529 resets = <&sys_rst 2>;
530 };
531 };
532};
533
534#include "uniphier-pinctrl.dtsi"
1// SPDX-License-Identifier: GPL-2.0+ OR MIT
2//
3// Device Tree Source for UniPhier PXs2 SoC
4//
5// Copyright (C) 2015-2016 Socionext Inc.
6// Author: Masahiro Yamada <yamada.masahiro@socionext.com>
7
8#include <dt-bindings/gpio/uniphier-gpio.h>
9#include <dt-bindings/thermal/thermal.h>
10
11/ {
12 compatible = "socionext,uniphier-pxs2";
13 #address-cells = <1>;
14 #size-cells = <1>;
15
16 cpus {
17 #address-cells = <1>;
18 #size-cells = <0>;
19
20 cpu0: cpu@0 {
21 device_type = "cpu";
22 compatible = "arm,cortex-a9";
23 reg = <0>;
24 clocks = <&sys_clk 32>;
25 enable-method = "psci";
26 next-level-cache = <&l2>;
27 operating-points-v2 = <&cpu_opp>;
28 #cooling-cells = <2>;
29 };
30
31 cpu1: cpu@1 {
32 device_type = "cpu";
33 compatible = "arm,cortex-a9";
34 reg = <1>;
35 clocks = <&sys_clk 32>;
36 enable-method = "psci";
37 next-level-cache = <&l2>;
38 operating-points-v2 = <&cpu_opp>;
39 #cooling-cells = <2>;
40 };
41
42 cpu2: cpu@2 {
43 device_type = "cpu";
44 compatible = "arm,cortex-a9";
45 reg = <2>;
46 clocks = <&sys_clk 32>;
47 enable-method = "psci";
48 next-level-cache = <&l2>;
49 operating-points-v2 = <&cpu_opp>;
50 #cooling-cells = <2>;
51 };
52
53 cpu3: cpu@3 {
54 device_type = "cpu";
55 compatible = "arm,cortex-a9";
56 reg = <3>;
57 clocks = <&sys_clk 32>;
58 enable-method = "psci";
59 next-level-cache = <&l2>;
60 operating-points-v2 = <&cpu_opp>;
61 #cooling-cells = <2>;
62 };
63 };
64
65 cpu_opp: opp-table {
66 compatible = "operating-points-v2";
67 opp-shared;
68
69 opp-100000000 {
70 opp-hz = /bits/ 64 <100000000>;
71 clock-latency-ns = <300>;
72 };
73 opp-150000000 {
74 opp-hz = /bits/ 64 <150000000>;
75 clock-latency-ns = <300>;
76 };
77 opp-200000000 {
78 opp-hz = /bits/ 64 <200000000>;
79 clock-latency-ns = <300>;
80 };
81 opp-300000000 {
82 opp-hz = /bits/ 64 <300000000>;
83 clock-latency-ns = <300>;
84 };
85 opp-400000000 {
86 opp-hz = /bits/ 64 <400000000>;
87 clock-latency-ns = <300>;
88 };
89 opp-600000000 {
90 opp-hz = /bits/ 64 <600000000>;
91 clock-latency-ns = <300>;
92 };
93 opp-800000000 {
94 opp-hz = /bits/ 64 <800000000>;
95 clock-latency-ns = <300>;
96 };
97 opp-1200000000 {
98 opp-hz = /bits/ 64 <1200000000>;
99 clock-latency-ns = <300>;
100 };
101 };
102
103 psci {
104 compatible = "arm,psci-0.2";
105 method = "smc";
106 };
107
108 clocks {
109 refclk: ref {
110 compatible = "fixed-clock";
111 #clock-cells = <0>;
112 clock-frequency = <25000000>;
113 };
114
115 arm_timer_clk: arm-timer {
116 #clock-cells = <0>;
117 compatible = "fixed-clock";
118 clock-frequency = <50000000>;
119 };
120 };
121
122 thermal-zones {
123 cpu-thermal {
124 polling-delay-passive = <250>; /* 250ms */
125 polling-delay = <1000>; /* 1000ms */
126 thermal-sensors = <&pvtctl>;
127
128 trips {
129 cpu_crit: cpu-crit {
130 temperature = <95000>; /* 95C */
131 hysteresis = <2000>;
132 type = "critical";
133 };
134 cpu_alert: cpu-alert {
135 temperature = <85000>; /* 85C */
136 hysteresis = <2000>;
137 type = "passive";
138 };
139 };
140
141 cooling-maps {
142 map {
143 trip = <&cpu_alert>;
144 cooling-device = <&cpu0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
145 <&cpu1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
146 <&cpu2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>,
147 <&cpu3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>;
148 };
149 };
150 };
151 };
152
153 soc {
154 compatible = "simple-bus";
155 #address-cells = <1>;
156 #size-cells = <1>;
157 ranges;
158 interrupt-parent = <&intc>;
159
160 l2: l2-cache@500c0000 {
161 compatible = "socionext,uniphier-system-cache";
162 reg = <0x500c0000 0x2000>, <0x503c0100 0x8>,
163 <0x506c0000 0x400>;
164 interrupts = <0 174 4>, <0 175 4>, <0 190 4>, <0 191 4>;
165 cache-unified;
166 cache-size = <(1280 * 1024)>;
167 cache-sets = <512>;
168 cache-line-size = <128>;
169 cache-level = <2>;
170 };
171
172 spi0: spi@54006000 {
173 compatible = "socionext,uniphier-scssi";
174 status = "disabled";
175 reg = <0x54006000 0x100>;
176 interrupts = <0 39 4>;
177 pinctrl-names = "default";
178 pinctrl-0 = <&pinctrl_spi0>;
179 clocks = <&peri_clk 11>;
180 resets = <&peri_rst 11>;
181 };
182
183 spi1: spi@54006100 {
184 compatible = "socionext,uniphier-scssi";
185 status = "disabled";
186 reg = <0x54006100 0x100>;
187 interrupts = <0 216 4>;
188 pinctrl-names = "default";
189 pinctrl-0 = <&pinctrl_spi1>;
190 clocks = <&peri_clk 11>;
191 resets = <&peri_rst 11>;
192 };
193
194 serial0: serial@54006800 {
195 compatible = "socionext,uniphier-uart";
196 status = "disabled";
197 reg = <0x54006800 0x40>;
198 interrupts = <0 33 4>;
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_uart0>;
201 clocks = <&peri_clk 0>;
202 resets = <&peri_rst 0>;
203 };
204
205 serial1: serial@54006900 {
206 compatible = "socionext,uniphier-uart";
207 status = "disabled";
208 reg = <0x54006900 0x40>;
209 interrupts = <0 35 4>;
210 pinctrl-names = "default";
211 pinctrl-0 = <&pinctrl_uart1>;
212 clocks = <&peri_clk 1>;
213 resets = <&peri_rst 1>;
214 };
215
216 serial2: serial@54006a00 {
217 compatible = "socionext,uniphier-uart";
218 status = "disabled";
219 reg = <0x54006a00 0x40>;
220 interrupts = <0 37 4>;
221 pinctrl-names = "default";
222 pinctrl-0 = <&pinctrl_uart2>;
223 clocks = <&peri_clk 2>;
224 resets = <&peri_rst 2>;
225 };
226
227 serial3: serial@54006b00 {
228 compatible = "socionext,uniphier-uart";
229 status = "disabled";
230 reg = <0x54006b00 0x40>;
231 interrupts = <0 177 4>;
232 pinctrl-names = "default";
233 pinctrl-0 = <&pinctrl_uart3>;
234 clocks = <&peri_clk 3>;
235 resets = <&peri_rst 3>;
236 };
237
238 gpio: gpio@55000000 {
239 compatible = "socionext,uniphier-gpio";
240 reg = <0x55000000 0x200>;
241 interrupt-parent = <&aidet>;
242 interrupt-controller;
243 #interrupt-cells = <2>;
244 gpio-controller;
245 #gpio-cells = <2>;
246 gpio-ranges = <&pinctrl 0 0 0>,
247 <&pinctrl 96 0 0>;
248 gpio-ranges-group-names = "gpio_range0",
249 "gpio_range1";
250 ngpios = <232>;
251 socionext,interrupt-ranges = <0 48 16>, <16 154 5>,
252 <21 217 3>;
253 };
254
255 audio@56000000 {
256 compatible = "socionext,uniphier-pxs2-aio";
257 reg = <0x56000000 0x80000>;
258 interrupts = <0 144 4>;
259 pinctrl-names = "default";
260 pinctrl-0 = <&pinctrl_ain1>,
261 <&pinctrl_ain2>,
262 <&pinctrl_ainiec1>,
263 <&pinctrl_aout2>,
264 <&pinctrl_aout3>,
265 <&pinctrl_aoutiec1>,
266 <&pinctrl_aoutiec2>;
267 clock-names = "aio";
268 clocks = <&sys_clk 40>;
269 reset-names = "aio";
270 resets = <&sys_rst 40>;
271 #sound-dai-cells = <1>;
272 socionext,syscon = <&soc_glue>;
273
274 i2s_port0: port@0 {
275 i2s_hdmi: endpoint {
276 };
277 };
278
279 i2s_port1: port@1 {
280 i2s_line: endpoint {
281 };
282 };
283
284 i2s_port2: port@2 {
285 i2s_aux: endpoint {
286 };
287 };
288
289 spdif_port0: port@3 {
290 spdif_hiecout1: endpoint {
291 };
292 };
293
294 spdif_port1: port@4 {
295 spdif_iecout1: endpoint {
296 };
297 };
298
299 comp_spdif_port0: port@5 {
300 comp_spdif_hiecout1: endpoint {
301 };
302 };
303
304 comp_spdif_port1: port@6 {
305 comp_spdif_iecout1: endpoint {
306 };
307 };
308 };
309
310 i2c0: i2c@58780000 {
311 compatible = "socionext,uniphier-fi2c";
312 status = "disabled";
313 reg = <0x58780000 0x80>;
314 #address-cells = <1>;
315 #size-cells = <0>;
316 interrupts = <0 41 4>;
317 pinctrl-names = "default";
318 pinctrl-0 = <&pinctrl_i2c0>;
319 clocks = <&peri_clk 4>;
320 resets = <&peri_rst 4>;
321 clock-frequency = <100000>;
322 };
323
324 i2c1: i2c@58781000 {
325 compatible = "socionext,uniphier-fi2c";
326 status = "disabled";
327 reg = <0x58781000 0x80>;
328 #address-cells = <1>;
329 #size-cells = <0>;
330 interrupts = <0 42 4>;
331 pinctrl-names = "default";
332 pinctrl-0 = <&pinctrl_i2c1>;
333 clocks = <&peri_clk 5>;
334 resets = <&peri_rst 5>;
335 clock-frequency = <100000>;
336 };
337
338 i2c2: i2c@58782000 {
339 compatible = "socionext,uniphier-fi2c";
340 status = "disabled";
341 reg = <0x58782000 0x80>;
342 #address-cells = <1>;
343 #size-cells = <0>;
344 interrupts = <0 43 4>;
345 pinctrl-names = "default";
346 pinctrl-0 = <&pinctrl_i2c2>;
347 clocks = <&peri_clk 6>;
348 resets = <&peri_rst 6>;
349 clock-frequency = <100000>;
350 };
351
352 i2c3: i2c@58783000 {
353 compatible = "socionext,uniphier-fi2c";
354 status = "disabled";
355 reg = <0x58783000 0x80>;
356 #address-cells = <1>;
357 #size-cells = <0>;
358 interrupts = <0 44 4>;
359 pinctrl-names = "default";
360 pinctrl-0 = <&pinctrl_i2c3>;
361 clocks = <&peri_clk 7>;
362 resets = <&peri_rst 7>;
363 clock-frequency = <100000>;
364 };
365
366 /* chip-internal connection for DMD */
367 i2c4: i2c@58784000 {
368 compatible = "socionext,uniphier-fi2c";
369 reg = <0x58784000 0x80>;
370 #address-cells = <1>;
371 #size-cells = <0>;
372 interrupts = <0 45 4>;
373 clocks = <&peri_clk 8>;
374 resets = <&peri_rst 8>;
375 clock-frequency = <400000>;
376 };
377
378 /* chip-internal connection for STM */
379 i2c5: i2c@58785000 {
380 compatible = "socionext,uniphier-fi2c";
381 reg = <0x58785000 0x80>;
382 #address-cells = <1>;
383 #size-cells = <0>;
384 interrupts = <0 25 4>;
385 clocks = <&peri_clk 9>;
386 resets = <&peri_rst 9>;
387 clock-frequency = <400000>;
388 };
389
390 /* chip-internal connection for HDMI */
391 i2c6: i2c@58786000 {
392 compatible = "socionext,uniphier-fi2c";
393 reg = <0x58786000 0x80>;
394 #address-cells = <1>;
395 #size-cells = <0>;
396 interrupts = <0 26 4>;
397 clocks = <&peri_clk 10>;
398 resets = <&peri_rst 10>;
399 clock-frequency = <400000>;
400 };
401
402 system_bus: system-bus@58c00000 {
403 compatible = "socionext,uniphier-system-bus";
404 status = "disabled";
405 reg = <0x58c00000 0x400>;
406 #address-cells = <2>;
407 #size-cells = <1>;
408 pinctrl-names = "default";
409 pinctrl-0 = <&pinctrl_system_bus>;
410 };
411
412 smpctrl@59801000 {
413 compatible = "socionext,uniphier-smpctrl";
414 reg = <0x59801000 0x400>;
415 };
416
417 sdctrl@59810000 {
418 compatible = "socionext,uniphier-pxs2-sdctrl",
419 "simple-mfd", "syscon";
420 reg = <0x59810000 0x400>;
421
422 sd_clk: clock {
423 compatible = "socionext,uniphier-pxs2-sd-clock";
424 #clock-cells = <1>;
425 };
426
427 sd_rst: reset {
428 compatible = "socionext,uniphier-pxs2-sd-reset";
429 #reset-cells = <1>;
430 };
431 };
432
433 perictrl@59820000 {
434 compatible = "socionext,uniphier-pxs2-perictrl",
435 "simple-mfd", "syscon";
436 reg = <0x59820000 0x200>;
437
438 peri_clk: clock {
439 compatible = "socionext,uniphier-pxs2-peri-clock";
440 #clock-cells = <1>;
441 };
442
443 peri_rst: reset {
444 compatible = "socionext,uniphier-pxs2-peri-reset";
445 #reset-cells = <1>;
446 };
447 };
448
449 emmc: sdhc@5a000000 {
450 compatible = "socionext,uniphier-sd-v3.1.1";
451 status = "disabled";
452 reg = <0x5a000000 0x800>;
453 interrupts = <0 78 4>;
454 pinctrl-names = "default";
455 pinctrl-0 = <&pinctrl_emmc>;
456 clocks = <&sd_clk 1>;
457 reset-names = "host", "hw";
458 resets = <&sd_rst 1>, <&sd_rst 6>;
459 bus-width = <8>;
460 cap-mmc-highspeed;
461 cap-mmc-hw-reset;
462 non-removable;
463 };
464
465 sd: sdhc@5a400000 {
466 compatible = "socionext,uniphier-sd-v3.1.1";
467 status = "disabled";
468 reg = <0x5a400000 0x800>;
469 interrupts = <0 76 4>;
470 pinctrl-names = "default", "uhs";
471 pinctrl-0 = <&pinctrl_sd>;
472 pinctrl-1 = <&pinctrl_sd_uhs>;
473 clocks = <&sd_clk 0>;
474 reset-names = "host";
475 resets = <&sd_rst 0>;
476 bus-width = <4>;
477 cap-sd-highspeed;
478 sd-uhs-sdr12;
479 sd-uhs-sdr25;
480 sd-uhs-sdr50;
481 };
482
483 soc_glue: soc-glue@5f800000 {
484 compatible = "socionext,uniphier-pxs2-soc-glue",
485 "simple-mfd", "syscon";
486 reg = <0x5f800000 0x2000>;
487
488 pinctrl: pinctrl {
489 compatible = "socionext,uniphier-pxs2-pinctrl";
490 };
491 };
492
493 soc-glue@5f900000 {
494 compatible = "socionext,uniphier-pxs2-soc-glue-debug",
495 "simple-mfd";
496 #address-cells = <1>;
497 #size-cells = <1>;
498 ranges = <0 0x5f900000 0x2000>;
499
500 efuse@100 {
501 compatible = "socionext,uniphier-efuse";
502 reg = <0x100 0x28>;
503 };
504
505 efuse@200 {
506 compatible = "socionext,uniphier-efuse";
507 reg = <0x200 0x58>;
508 };
509 };
510
511 aidet: aidet@5fc20000 {
512 compatible = "socionext,uniphier-pxs2-aidet";
513 reg = <0x5fc20000 0x200>;
514 interrupt-controller;
515 #interrupt-cells = <2>;
516 };
517
518 timer@60000200 {
519 compatible = "arm,cortex-a9-global-timer";
520 reg = <0x60000200 0x20>;
521 interrupts = <1 11 0xf04>;
522 clocks = <&arm_timer_clk>;
523 };
524
525 timer@60000600 {
526 compatible = "arm,cortex-a9-twd-timer";
527 reg = <0x60000600 0x20>;
528 interrupts = <1 13 0xf04>;
529 clocks = <&arm_timer_clk>;
530 };
531
532 intc: interrupt-controller@60001000 {
533 compatible = "arm,cortex-a9-gic";
534 reg = <0x60001000 0x1000>,
535 <0x60000100 0x100>;
536 #interrupt-cells = <3>;
537 interrupt-controller;
538 };
539
540 sysctrl@61840000 {
541 compatible = "socionext,uniphier-pxs2-sysctrl",
542 "simple-mfd", "syscon";
543 reg = <0x61840000 0x10000>;
544
545 sys_clk: clock {
546 compatible = "socionext,uniphier-pxs2-clock";
547 #clock-cells = <1>;
548 };
549
550 sys_rst: reset {
551 compatible = "socionext,uniphier-pxs2-reset";
552 #reset-cells = <1>;
553 };
554
555 pvtctl: pvtctl {
556 compatible = "socionext,uniphier-pxs2-thermal";
557 interrupts = <0 3 4>;
558 #thermal-sensor-cells = <0>;
559 socionext,tmod-calibration = <0x0f86 0x6844>;
560 };
561 };
562
563 eth: ethernet@65000000 {
564 compatible = "socionext,uniphier-pxs2-ave4";
565 status = "disabled";
566 reg = <0x65000000 0x8500>;
567 interrupts = <0 66 4>;
568 pinctrl-names = "default";
569 pinctrl-0 = <&pinctrl_ether_rgmii>;
570 clock-names = "ether";
571 clocks = <&sys_clk 6>;
572 reset-names = "ether";
573 resets = <&sys_rst 6>;
574 phy-mode = "rgmii";
575 local-mac-address = [00 00 00 00 00 00];
576 socionext,syscon-phy-mode = <&soc_glue 0>;
577
578 mdio: mdio {
579 #address-cells = <1>;
580 #size-cells = <0>;
581 };
582 };
583
584 usb0: usb@65a00000 {
585 compatible = "socionext,uniphier-dwc3", "snps,dwc3";
586 status = "disabled";
587 reg = <0x65a00000 0xcd00>;
588 interrupt-names = "host", "peripheral";
589 interrupts = <0 134 4>, <0 135 4>;
590 pinctrl-names = "default";
591 pinctrl-0 = <&pinctrl_usb0>, <&pinctrl_usb2>;
592 clock-names = "ref", "bus_early", "suspend";
593 clocks = <&sys_clk 14>, <&sys_clk 14>, <&sys_clk 14>;
594 resets = <&usb0_rst 15>;
595 phys = <&usb0_hsphy0>, <&usb0_hsphy1>,
596 <&usb0_ssphy0>, <&usb0_ssphy1>;
597 dr_mode = "host";
598 };
599
600 usb-glue@65b00000 {
601 compatible = "socionext,uniphier-pxs2-dwc3-glue",
602 "simple-mfd";
603 #address-cells = <1>;
604 #size-cells = <1>;
605 ranges = <0 0x65b00000 0x400>;
606
607 usb0_rst: reset@0 {
608 compatible = "socionext,uniphier-pxs2-usb3-reset";
609 reg = <0x0 0x4>;
610 #reset-cells = <1>;
611 clock-names = "link";
612 clocks = <&sys_clk 14>;
613 reset-names = "link";
614 resets = <&sys_rst 14>;
615 };
616
617 usb0_vbus0: regulator@100 {
618 compatible = "socionext,uniphier-pxs2-usb3-regulator";
619 reg = <0x100 0x10>;
620 clock-names = "link";
621 clocks = <&sys_clk 14>;
622 reset-names = "link";
623 resets = <&sys_rst 14>;
624 };
625
626 usb0_vbus1: regulator@110 {
627 compatible = "socionext,uniphier-pxs2-usb3-regulator";
628 reg = <0x110 0x10>;
629 clock-names = "link";
630 clocks = <&sys_clk 14>;
631 reset-names = "link";
632 resets = <&sys_rst 14>;
633 };
634
635 usb0_hsphy0: hs-phy@200 {
636 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
637 reg = <0x200 0x10>;
638 #phy-cells = <0>;
639 clock-names = "link", "phy";
640 clocks = <&sys_clk 14>, <&sys_clk 16>;
641 reset-names = "link", "phy";
642 resets = <&sys_rst 14>, <&sys_rst 16>;
643 vbus-supply = <&usb0_vbus0>;
644 };
645
646 usb0_hsphy1: hs-phy@210 {
647 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
648 reg = <0x210 0x10>;
649 #phy-cells = <0>;
650 clock-names = "link", "phy";
651 clocks = <&sys_clk 14>, <&sys_clk 16>;
652 reset-names = "link", "phy";
653 resets = <&sys_rst 14>, <&sys_rst 16>;
654 vbus-supply = <&usb0_vbus1>;
655 };
656
657 usb0_ssphy0: ss-phy@300 {
658 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
659 reg = <0x300 0x10>;
660 #phy-cells = <0>;
661 clock-names = "link", "phy";
662 clocks = <&sys_clk 14>, <&sys_clk 17>;
663 reset-names = "link", "phy";
664 resets = <&sys_rst 14>, <&sys_rst 17>;
665 vbus-supply = <&usb0_vbus0>;
666 };
667
668 usb0_ssphy1: ss-phy@310 {
669 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
670 reg = <0x310 0x10>;
671 #phy-cells = <0>;
672 clock-names = "link", "phy";
673 clocks = <&sys_clk 14>, <&sys_clk 18>;
674 reset-names = "link", "phy";
675 resets = <&sys_rst 14>, <&sys_rst 18>;
676 vbus-supply = <&usb0_vbus1>;
677 };
678 };
679
680 usb1: usb@65c00000 {
681 compatible = "socionext,uniphier-dwc3", "snps,dwc3";
682 status = "disabled";
683 reg = <0x65c00000 0xcd00>;
684 interrupt-names = "host", "peripheral";
685 interrupts = <0 137 4>, <0 138 4>;
686 pinctrl-names = "default";
687 pinctrl-0 = <&pinctrl_usb1>, <&pinctrl_usb3>;
688 clock-names = "ref", "bus_early", "suspend";
689 clocks = <&sys_clk 15>, <&sys_clk 15>, <&sys_clk 15>;
690 resets = <&usb1_rst 15>;
691 phys = <&usb1_hsphy0>, <&usb1_hsphy1>, <&usb1_ssphy0>;
692 dr_mode = "host";
693 };
694
695 usb-glue@65d00000 {
696 compatible = "socionext,uniphier-pxs2-dwc3-glue",
697 "simple-mfd";
698 #address-cells = <1>;
699 #size-cells = <1>;
700 ranges = <0 0x65d00000 0x400>;
701
702 usb1_rst: reset@0 {
703 compatible = "socionext,uniphier-pxs2-usb3-reset";
704 reg = <0x0 0x4>;
705 #reset-cells = <1>;
706 clock-names = "link";
707 clocks = <&sys_clk 15>;
708 reset-names = "link";
709 resets = <&sys_rst 15>;
710 };
711
712 usb1_vbus0: regulator@100 {
713 compatible = "socionext,uniphier-pxs2-usb3-regulator";
714 reg = <0x100 0x10>;
715 clock-names = "link";
716 clocks = <&sys_clk 15>;
717 reset-names = "link";
718 resets = <&sys_rst 15>;
719 };
720
721 usb1_vbus1: regulator@110 {
722 compatible = "socionext,uniphier-pxs2-usb3-regulator";
723 reg = <0x110 0x10>;
724 clock-names = "link";
725 clocks = <&sys_clk 15>;
726 reset-names = "link";
727 resets = <&sys_rst 15>;
728 };
729
730 usb1_hsphy0: hs-phy@200 {
731 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
732 reg = <0x200 0x10>;
733 #phy-cells = <0>;
734 clock-names = "link", "phy";
735 clocks = <&sys_clk 15>, <&sys_clk 20>;
736 reset-names = "link", "phy";
737 resets = <&sys_rst 15>, <&sys_rst 20>;
738 vbus-supply = <&usb1_vbus0>;
739 };
740
741 usb1_hsphy1: hs-phy@210 {
742 compatible = "socionext,uniphier-pxs2-usb3-hsphy";
743 reg = <0x210 0x10>;
744 #phy-cells = <0>;
745 clock-names = "link", "phy";
746 clocks = <&sys_clk 15>, <&sys_clk 20>;
747 reset-names = "link", "phy";
748 resets = <&sys_rst 15>, <&sys_rst 20>;
749 vbus-supply = <&usb1_vbus1>;
750 };
751
752 usb1_ssphy0: ss-phy@300 {
753 compatible = "socionext,uniphier-pxs2-usb3-ssphy";
754 reg = <0x300 0x10>;
755 #phy-cells = <0>;
756 clock-names = "link", "phy";
757 clocks = <&sys_clk 15>, <&sys_clk 21>;
758 reset-names = "link", "phy";
759 resets = <&sys_rst 15>, <&sys_rst 21>;
760 vbus-supply = <&usb1_vbus0>;
761 };
762 };
763
764 nand: nand@68000000 {
765 compatible = "socionext,uniphier-denali-nand-v5b";
766 status = "disabled";
767 reg-names = "nand_data", "denali_reg";
768 reg = <0x68000000 0x20>, <0x68100000 0x1000>;
769 #address-cells = <1>;
770 #size-cells = <0>;
771 interrupts = <0 65 4>;
772 pinctrl-names = "default";
773 pinctrl-0 = <&pinctrl_nand>;
774 clock-names = "nand", "nand_x", "ecc";
775 clocks = <&sys_clk 2>, <&sys_clk 3>, <&sys_clk 3>;
776 resets = <&sys_rst 2>;
777 };
778 };
779};
780
781#include "uniphier-pinctrl.dtsi"