Loading...
1/*
2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "stm32f746.dtsi"
45#include "stm32f746-pinctrl.dtsi"
46#include <dt-bindings/input/input.h>
47
48/ {
49 model = "STMicroelectronics STM32746g-EVAL board";
50 compatible = "st,stm32746g-eval", "st,stm32f746";
51
52 chosen {
53 bootargs = "root=/dev/ram";
54 stdout-path = "serial0:115200n8";
55 };
56
57 memory {
58 reg = <0xc0000000 0x2000000>;
59 };
60
61 aliases {
62 serial0 = &usart1;
63 };
64
65 leds {
66 compatible = "gpio-leds";
67 green {
68 gpios = <&gpiof 10 1>;
69 linux,default-trigger = "heartbeat";
70 };
71 red {
72 gpios = <&gpiob 7 1>;
73 };
74 };
75
76 gpio_keys {
77 compatible = "gpio-keys";
78 #address-cells = <1>;
79 #size-cells = <0>;
80 autorepeat;
81 button@0 {
82 label = "Wake up";
83 linux,code = <KEY_WAKEUP>;
84 gpios = <&gpioc 13 0>;
85 };
86 };
87
88 usbotg_hs_phy: usb-phy {
89 #phy-cells = <0>;
90 compatible = "usb-nop-xceiv";
91 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
92 clock-names = "main_clk";
93 };
94
95 mmc_vcard: mmc_vcard {
96 compatible = "regulator-fixed";
97 regulator-name = "mmc_vcard";
98 regulator-min-microvolt = <3300000>;
99 regulator-max-microvolt = <3300000>;
100 };
101};
102
103&clk_hse {
104 clock-frequency = <25000000>;
105};
106
107&crc {
108 status = "okay";
109};
110
111&i2c1 {
112 pinctrl-0 = <&i2c1_pins_b>;
113 pinctrl-names = "default";
114 i2c-scl-rising-time-ns = <185>;
115 i2c-scl-falling-time-ns = <20>;
116 status = "okay";
117};
118
119&rtc {
120 status = "okay";
121};
122
123&sdio1 {
124 status = "okay";
125 vmmc-supply = <&mmc_vcard>;
126 broken-cd;
127 pinctrl-names = "default", "opendrain";
128 pinctrl-0 = <&sdio_pins_a>;
129 pinctrl-1 = <&sdio_pins_od_a>;
130 bus-width = <4>;
131};
132
133&usart1 {
134 pinctrl-0 = <&usart1_pins_a>;
135 pinctrl-names = "default";
136 status = "okay";
137};
138
139&usbotg_hs {
140 dr_mode = "otg";
141 phys = <&usbotg_hs_phy>;
142 phy-names = "usb2-phy";
143 pinctrl-0 = <&usbotg_hs_pins_a>;
144 pinctrl-names = "default";
145 status = "okay";
146};
1/*
2 * Copyright 2015 - Maxime Coquelin <mcoquelin.stm32@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "stm32f746.dtsi"
45#include "stm32f746-pinctrl.dtsi"
46#include <dt-bindings/input/input.h>
47#include <dt-bindings/interrupt-controller/irq.h>
48
49/ {
50 model = "STMicroelectronics STM32746g-EVAL board";
51 compatible = "st,stm32746g-eval", "st,stm32f746";
52
53 chosen {
54 bootargs = "root=/dev/ram";
55 stdout-path = "serial0:115200n8";
56 };
57
58 memory {
59 device_type = "memory";
60 reg = <0xc0000000 0x2000000>;
61 };
62
63 aliases {
64 serial0 = &usart1;
65 };
66
67 leds {
68 compatible = "gpio-leds";
69 green {
70 gpios = <&gpiof 10 1>;
71 linux,default-trigger = "heartbeat";
72 };
73 orange {
74 gpios = <&stmfx_pinctrl 17 1>;
75 };
76 red {
77 gpios = <&gpiob 7 1>;
78 };
79 blue {
80 gpios = <&stmfx_pinctrl 19 1>;
81 };
82 };
83
84 gpio_keys {
85 compatible = "gpio-keys";
86 #address-cells = <1>;
87 #size-cells = <0>;
88 autorepeat;
89 button@0 {
90 label = "Wake up";
91 linux,code = <KEY_WAKEUP>;
92 gpios = <&gpioc 13 0>;
93 };
94 };
95
96 joystick {
97 compatible = "gpio-keys";
98 #size-cells = <0>;
99 pinctrl-0 = <&joystick_pins>;
100 pinctrl-names = "default";
101 button-0 {
102 label = "JoySel";
103 linux,code = <KEY_ENTER>;
104 interrupt-parent = <&stmfx_pinctrl>;
105 interrupts = <0 IRQ_TYPE_EDGE_FALLING>;
106 };
107 button-1 {
108 label = "JoyDown";
109 linux,code = <KEY_DOWN>;
110 interrupt-parent = <&stmfx_pinctrl>;
111 interrupts = <1 IRQ_TYPE_EDGE_FALLING>;
112 };
113 button-2 {
114 label = "JoyLeft";
115 linux,code = <KEY_LEFT>;
116 interrupt-parent = <&stmfx_pinctrl>;
117 interrupts = <2 IRQ_TYPE_EDGE_FALLING>;
118 };
119 button-3 {
120 label = "JoyRight";
121 linux,code = <KEY_RIGHT>;
122 interrupt-parent = <&stmfx_pinctrl>;
123 interrupts = <3 IRQ_TYPE_EDGE_FALLING>;
124 };
125 button-4 {
126 label = "JoyUp";
127 linux,code = <KEY_UP>;
128 interrupt-parent = <&stmfx_pinctrl>;
129 interrupts = <4 IRQ_TYPE_EDGE_FALLING>;
130 };
131 };
132
133 usbotg_hs_phy: usb-phy {
134 #phy-cells = <0>;
135 compatible = "usb-nop-xceiv";
136 clocks = <&rcc 0 STM32F7_AHB1_CLOCK(OTGHSULPI)>;
137 clock-names = "main_clk";
138 };
139
140 mmc_vcard: mmc_vcard {
141 compatible = "regulator-fixed";
142 regulator-name = "mmc_vcard";
143 regulator-min-microvolt = <3300000>;
144 regulator-max-microvolt = <3300000>;
145 };
146};
147
148&clk_hse {
149 clock-frequency = <25000000>;
150};
151
152&crc {
153 status = "okay";
154};
155
156&i2c1 {
157 pinctrl-0 = <&i2c1_pins_b>;
158 pinctrl-names = "default";
159 i2c-scl-rising-time-ns = <185>;
160 i2c-scl-falling-time-ns = <20>;
161 status = "okay";
162
163 stmfx: stmfx@42 {
164 compatible = "st,stmfx-0300";
165 reg = <0x42>;
166 interrupts = <8 IRQ_TYPE_EDGE_RISING>;
167 interrupt-parent = <&gpioi>;
168
169 stmfx_pinctrl: stmfx-pin-controller {
170 compatible = "st,stmfx-0300-pinctrl";
171 gpio-controller;
172 #gpio-cells = <2>;
173 interrupt-controller;
174 #interrupt-cells = <2>;
175 gpio-ranges = <&stmfx_pinctrl 0 0 24>;
176
177 joystick_pins: joystick {
178 pins = "gpio0", "gpio1", "gpio2", "gpio3", "gpio4";
179 drive-push-pull;
180 bias-pull-up;
181 };
182 };
183 };
184};
185
186&rtc {
187 status = "okay";
188};
189
190&sdio1 {
191 status = "okay";
192 vmmc-supply = <&mmc_vcard>;
193 broken-cd;
194 pinctrl-names = "default", "opendrain";
195 pinctrl-0 = <&sdio_pins_a>;
196 pinctrl-1 = <&sdio_pins_od_a>;
197 bus-width = <4>;
198};
199
200&usart1 {
201 pinctrl-0 = <&usart1_pins_a>;
202 pinctrl-names = "default";
203 status = "okay";
204};
205
206&usbotg_hs {
207 dr_mode = "otg";
208 phys = <&usbotg_hs_phy>;
209 phy-names = "usb2-phy";
210 pinctrl-0 = <&usbotg_hs_pins_a>;
211 pinctrl-names = "default";
212 status = "okay";
213};