Loading...
1/*
2 * Support for CompuLab CL-SOM-iMX7 System-on-Module
3 *
4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
5 * Author: Ilya Ledvich <ilya@compulab.co.il>
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 */
12
13/dts-v1/;
14
15#include "imx7d.dtsi"
16
17/ {
18 model = "CompuLab CL-SOM-iMX7";
19 compatible = "compulab,cl-som-imx7", "fsl,imx7d";
20
21 memory@80000000 {
22 reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
23 };
24
25 reg_usb_otg1_vbus: regulator-vbus {
26 compatible = "regulator-fixed";
27 regulator-name = "usb_otg1_vbus";
28 regulator-min-microvolt = <5000000>;
29 regulator-max-microvolt = <5000000>;
30 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
31 enable-active-high;
32 };
33};
34
35&cpu0 {
36 arm-supply = <&sw1a_reg>;
37};
38
39&fec1 {
40 pinctrl-names = "default";
41 pinctrl-0 = <&pinctrl_enet1>;
42 assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
43 <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
44 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
45 assigned-clock-rates = <0>, <100000000>;
46 phy-mode = "rgmii";
47 phy-handle = <ðphy0>;
48 fsl,magic-packet;
49 status = "okay";
50
51 mdio {
52 #address-cells = <1>;
53 #size-cells = <0>;
54
55 ethphy0: ethernet-phy@0 {
56 reg = <0>;
57 };
58
59 ethphy1: ethernet-phy@1 {
60 reg = <1>;
61 };
62 };
63};
64
65&fec2 {
66 pinctrl-names = "default";
67 pinctrl-0 = <&pinctrl_enet2>;
68 assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
69 <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
70 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
71 assigned-clock-rates = <0>, <100000000>;
72 phy-mode = "rgmii";
73 phy-handle = <ðphy1>;
74 fsl,magic-packet;
75 status = "okay";
76};
77
78&i2c2 {
79 pinctrl-names = "default";
80 pinctrl-0 = <&pinctrl_i2c2>;
81 status = "okay";
82
83 pmic: pmic@8 {
84 compatible = "fsl,pfuze3000";
85 reg = <0x08>;
86
87 regulators {
88 sw1a_reg: sw1a {
89 regulator-min-microvolt = <700000>;
90 regulator-max-microvolt = <1475000>;
91 regulator-boot-on;
92 regulator-always-on;
93 regulator-ramp-delay = <6250>;
94 };
95
96 /* use sw1c_reg to align with pfuze100/pfuze200 */
97 sw1c_reg: sw1b {
98 regulator-min-microvolt = <700000>;
99 regulator-max-microvolt = <1475000>;
100 regulator-boot-on;
101 regulator-always-on;
102 regulator-ramp-delay = <6250>;
103 };
104
105 sw2_reg: sw2 {
106 regulator-min-microvolt = <1500000>;
107 regulator-max-microvolt = <1850000>;
108 regulator-boot-on;
109 regulator-always-on;
110 };
111
112 sw3a_reg: sw3 {
113 regulator-min-microvolt = <900000>;
114 regulator-max-microvolt = <1650000>;
115 regulator-boot-on;
116 regulator-always-on;
117 };
118
119 swbst_reg: swbst {
120 regulator-min-microvolt = <5000000>;
121 regulator-max-microvolt = <5150000>;
122 };
123
124 snvs_reg: vsnvs {
125 regulator-min-microvolt = <1000000>;
126 regulator-max-microvolt = <3000000>;
127 regulator-boot-on;
128 regulator-always-on;
129 };
130
131 vref_reg: vrefddr {
132 regulator-boot-on;
133 regulator-always-on;
134 };
135
136 vgen1_reg: vldo1 {
137 regulator-min-microvolt = <1800000>;
138 regulator-max-microvolt = <3300000>;
139 regulator-always-on;
140 };
141
142 vgen2_reg: vldo2 {
143 regulator-min-microvolt = <800000>;
144 regulator-max-microvolt = <1550000>;
145 };
146
147 vgen3_reg: vccsd {
148 regulator-min-microvolt = <2850000>;
149 regulator-max-microvolt = <3300000>;
150 regulator-always-on;
151 };
152
153 vgen4_reg: v33 {
154 regulator-min-microvolt = <2850000>;
155 regulator-max-microvolt = <3300000>;
156 regulator-always-on;
157 };
158
159 vgen5_reg: vldo3 {
160 regulator-min-microvolt = <1800000>;
161 regulator-max-microvolt = <3300000>;
162 regulator-always-on;
163 };
164
165 vgen6_reg: vldo4 {
166 regulator-min-microvolt = <1800000>;
167 regulator-max-microvolt = <3300000>;
168 regulator-always-on;
169 };
170 };
171 };
172
173 pca9555: pca9555@20 {
174 compatible = "nxp,pca9555";
175 gpio-controller;
176 #gpio-cells = <2>;
177 reg = <0x20>;
178 };
179
180 eeprom@50 {
181 compatible = "atmel,24c08";
182 reg = <0x50>;
183 pagesize = <16>;
184 };
185};
186
187&uart1 {
188 pinctrl-names = "default";
189 pinctrl-0 = <&pinctrl_uart1>;
190 assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
191 assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
192 status = "okay";
193};
194
195&usbotg1 {
196 pinctrl-names = "default";
197 pinctrl-0 = <&pinctrl_usbotg1>;
198 vbus-supply = <®_usb_otg1_vbus>;
199 status = "okay";
200};
201
202&usdhc3 {
203 pinctrl-names = "default";
204 pinctrl-0 = <&pinctrl_usdhc3>;
205 assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
206 assigned-clock-rates = <400000000>;
207 bus-width = <8>;
208 fsl,tuning-step = <2>;
209 non-removable;
210 status = "okay";
211};
212
213&iomuxc {
214 pinctrl_enet1: enet1grp {
215 fsl,pins = <
216 MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30
217 MX7D_PAD_SD2_WP__ENET1_MDC 0x30
218 MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11
219 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11
220 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11
221 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11
222 MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11
223 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11
224 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11
225 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
226 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
227 MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
228 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11
229 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
230 >;
231 };
232
233 pinctrl_enet2: enet2grp {
234 fsl,pins = <
235 MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11
236 MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11
237 MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11
238 MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11
239 MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11
240 MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11
241 MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11
242 MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11
243 MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11
244 MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11
245 MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11
246 MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11
247 >;
248 };
249
250 pinctrl_i2c2: i2c2grp {
251 fsl,pins = <
252 MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
253 MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
254 >;
255 };
256
257 pinctrl_uart1: uart1grp {
258 fsl,pins = <
259 MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
260 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
261 >;
262 };
263
264 pinctrl_usdhc3: usdhc3grp {
265 fsl,pins = <
266 MX7D_PAD_SD3_CMD__SD3_CMD 0x59
267 MX7D_PAD_SD3_CLK__SD3_CLK 0x19
268 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
269 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
270 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
271 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
272 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
273 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
274 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
275 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
276 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
277 >;
278 };
279};
280
281&iomuxc_lpsr {
282 pinctrl_usbotg1: usbotg1grp {
283 fsl,pins = <
284 MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
285 >;
286 };
287};
1/*
2 * Support for CompuLab CL-SOM-iMX7 System-on-Module
3 *
4 * Copyright (C) 2015 CompuLab Ltd. - http://www.compulab.co.il/
5 * Author: Ilya Ledvich <ilya@compulab.co.il>
6 *
7 * This file is dual-licensed: you can use it either under the terms
8 * of the GPL or the X11 license, at your option. Note that this dual
9 * licensing only applies to this file, and not this project as a
10 * whole.
11 */
12
13/dts-v1/;
14
15#include "imx7d.dtsi"
16
17/ {
18 model = "CompuLab CL-SOM-iMX7";
19 compatible = "compulab,cl-som-imx7", "fsl,imx7d";
20
21 memory@80000000 {
22 device_type = "memory";
23 reg = <0x80000000 0x10000000>; /* 256 MB - minimal configuration */
24 };
25
26 reg_usb_otg1_vbus: regulator-vbus {
27 compatible = "regulator-fixed";
28 regulator-name = "usb_otg1_vbus";
29 regulator-min-microvolt = <5000000>;
30 regulator-max-microvolt = <5000000>;
31 gpio = <&gpio1 5 GPIO_ACTIVE_HIGH>;
32 enable-active-high;
33 };
34};
35
36&cpu0 {
37 cpu-supply = <&sw1a_reg>;
38};
39
40&fec1 {
41 pinctrl-names = "default";
42 pinctrl-0 = <&pinctrl_enet1>;
43 assigned-clocks = <&clks IMX7D_ENET1_TIME_ROOT_SRC>,
44 <&clks IMX7D_ENET1_TIME_ROOT_CLK>;
45 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
46 assigned-clock-rates = <0>, <100000000>;
47 phy-mode = "rgmii-id";
48 phy-handle = <ðphy0>;
49 fsl,magic-packet;
50 status = "okay";
51
52 mdio {
53 #address-cells = <1>;
54 #size-cells = <0>;
55
56 ethphy0: ethernet-phy@0 {
57 compatible = "ethernet-phy-ieee802.3-c22";
58 reg = <0>;
59 };
60
61 ethphy1: ethernet-phy@1 {
62 compatible = "ethernet-phy-ieee802.3-c22";
63 reg = <1>;
64 };
65 };
66};
67
68&fec2 {
69 pinctrl-names = "default";
70 pinctrl-0 = <&pinctrl_enet2>;
71 assigned-clocks = <&clks IMX7D_ENET2_TIME_ROOT_SRC>,
72 <&clks IMX7D_ENET2_TIME_ROOT_CLK>;
73 assigned-clock-parents = <&clks IMX7D_PLL_ENET_MAIN_100M_CLK>;
74 assigned-clock-rates = <0>, <100000000>;
75 phy-mode = "rgmii-id";
76 phy-handle = <ðphy1>;
77 fsl,magic-packet;
78 status = "okay";
79};
80
81&i2c2 {
82 pinctrl-names = "default";
83 pinctrl-0 = <&pinctrl_i2c2>;
84 status = "okay";
85
86 pmic: pmic@8 {
87 compatible = "fsl,pfuze3000";
88 reg = <0x08>;
89
90 regulators {
91 sw1a_reg: sw1a {
92 regulator-min-microvolt = <700000>;
93 regulator-max-microvolt = <1475000>;
94 regulator-boot-on;
95 regulator-always-on;
96 regulator-ramp-delay = <6250>;
97 };
98
99 /* use sw1c_reg to align with pfuze100/pfuze200 */
100 sw1c_reg: sw1b {
101 regulator-min-microvolt = <700000>;
102 regulator-max-microvolt = <1475000>;
103 regulator-boot-on;
104 regulator-always-on;
105 regulator-ramp-delay = <6250>;
106 };
107
108 sw2_reg: sw2 {
109 regulator-min-microvolt = <1500000>;
110 regulator-max-microvolt = <1850000>;
111 regulator-boot-on;
112 regulator-always-on;
113 };
114
115 sw3a_reg: sw3 {
116 regulator-min-microvolt = <900000>;
117 regulator-max-microvolt = <1650000>;
118 regulator-boot-on;
119 regulator-always-on;
120 };
121
122 swbst_reg: swbst {
123 regulator-min-microvolt = <5000000>;
124 regulator-max-microvolt = <5150000>;
125 };
126
127 snvs_reg: vsnvs {
128 regulator-min-microvolt = <1000000>;
129 regulator-max-microvolt = <3000000>;
130 regulator-boot-on;
131 regulator-always-on;
132 };
133
134 vref_reg: vrefddr {
135 regulator-boot-on;
136 regulator-always-on;
137 };
138
139 vgen1_reg: vldo1 {
140 regulator-min-microvolt = <1800000>;
141 regulator-max-microvolt = <3300000>;
142 regulator-always-on;
143 };
144
145 vgen2_reg: vldo2 {
146 regulator-min-microvolt = <800000>;
147 regulator-max-microvolt = <1550000>;
148 };
149
150 vgen3_reg: vccsd {
151 regulator-min-microvolt = <2850000>;
152 regulator-max-microvolt = <3300000>;
153 regulator-always-on;
154 };
155
156 vgen4_reg: v33 {
157 regulator-min-microvolt = <2850000>;
158 regulator-max-microvolt = <3300000>;
159 regulator-always-on;
160 };
161
162 vgen5_reg: vldo3 {
163 regulator-min-microvolt = <1800000>;
164 regulator-max-microvolt = <3300000>;
165 regulator-always-on;
166 };
167
168 vgen6_reg: vldo4 {
169 regulator-min-microvolt = <1800000>;
170 regulator-max-microvolt = <3300000>;
171 regulator-always-on;
172 };
173 };
174 };
175
176 pca9555: pca9555@20 {
177 compatible = "nxp,pca9555";
178 gpio-controller;
179 #gpio-cells = <2>;
180 reg = <0x20>;
181 };
182
183 eeprom@50 {
184 compatible = "atmel,24c08";
185 reg = <0x50>;
186 pagesize = <16>;
187 };
188};
189
190&uart1 {
191 pinctrl-names = "default";
192 pinctrl-0 = <&pinctrl_uart1>;
193 assigned-clocks = <&clks IMX7D_UART1_ROOT_SRC>;
194 assigned-clock-parents = <&clks IMX7D_PLL_SYS_MAIN_240M_CLK>;
195 status = "okay";
196};
197
198&usbotg1 {
199 pinctrl-names = "default";
200 pinctrl-0 = <&pinctrl_usbotg1>;
201 vbus-supply = <®_usb_otg1_vbus>;
202 status = "okay";
203};
204
205&usdhc3 {
206 pinctrl-names = "default";
207 pinctrl-0 = <&pinctrl_usdhc3>;
208 assigned-clocks = <&clks IMX7D_USDHC3_ROOT_CLK>;
209 assigned-clock-rates = <400000000>;
210 bus-width = <8>;
211 fsl,tuning-step = <2>;
212 non-removable;
213 status = "okay";
214};
215
216&iomuxc {
217 pinctrl_enet1: enet1grp {
218 fsl,pins = <
219 MX7D_PAD_SD2_CD_B__ENET1_MDIO 0x30
220 MX7D_PAD_SD2_WP__ENET1_MDC 0x30
221 MX7D_PAD_ENET1_RGMII_TXC__ENET1_RGMII_TXC 0x11
222 MX7D_PAD_ENET1_RGMII_TD0__ENET1_RGMII_TD0 0x11
223 MX7D_PAD_ENET1_RGMII_TD1__ENET1_RGMII_TD1 0x11
224 MX7D_PAD_ENET1_RGMII_TD2__ENET1_RGMII_TD2 0x11
225 MX7D_PAD_ENET1_RGMII_TD3__ENET1_RGMII_TD3 0x11
226 MX7D_PAD_ENET1_RGMII_TX_CTL__ENET1_RGMII_TX_CTL 0x11
227 MX7D_PAD_ENET1_RGMII_RXC__ENET1_RGMII_RXC 0x11
228 MX7D_PAD_ENET1_RGMII_RD0__ENET1_RGMII_RD0 0x11
229 MX7D_PAD_ENET1_RGMII_RD1__ENET1_RGMII_RD1 0x11
230 MX7D_PAD_ENET1_RGMII_RD2__ENET1_RGMII_RD2 0x11
231 MX7D_PAD_ENET1_RGMII_RD3__ENET1_RGMII_RD3 0x11
232 MX7D_PAD_ENET1_RGMII_RX_CTL__ENET1_RGMII_RX_CTL 0x11
233 >;
234 };
235
236 pinctrl_enet2: enet2grp {
237 fsl,pins = <
238 MX7D_PAD_EPDC_GDSP__ENET2_RGMII_TXC 0x11
239 MX7D_PAD_EPDC_SDCE2__ENET2_RGMII_TD0 0x11
240 MX7D_PAD_EPDC_SDCE3__ENET2_RGMII_TD1 0x11
241 MX7D_PAD_EPDC_GDCLK__ENET2_RGMII_TD2 0x11
242 MX7D_PAD_EPDC_GDOE__ENET2_RGMII_TD3 0x11
243 MX7D_PAD_EPDC_GDRL__ENET2_RGMII_TX_CTL 0x11
244 MX7D_PAD_EPDC_SDCE1__ENET2_RGMII_RXC 0x11
245 MX7D_PAD_EPDC_SDCLK__ENET2_RGMII_RD0 0x11
246 MX7D_PAD_EPDC_SDLE__ENET2_RGMII_RD1 0x11
247 MX7D_PAD_EPDC_SDOE__ENET2_RGMII_RD2 0x11
248 MX7D_PAD_EPDC_SDSHR__ENET2_RGMII_RD3 0x11
249 MX7D_PAD_EPDC_SDCE0__ENET2_RGMII_RX_CTL 0x11
250 >;
251 };
252
253 pinctrl_i2c2: i2c2grp {
254 fsl,pins = <
255 MX7D_PAD_I2C2_SDA__I2C2_SDA 0x4000007f
256 MX7D_PAD_I2C2_SCL__I2C2_SCL 0x4000007f
257 >;
258 };
259
260 pinctrl_uart1: uart1grp {
261 fsl,pins = <
262 MX7D_PAD_UART1_TX_DATA__UART1_DCE_TX 0x79
263 MX7D_PAD_UART1_RX_DATA__UART1_DCE_RX 0x79
264 >;
265 };
266
267 pinctrl_usdhc3: usdhc3grp {
268 fsl,pins = <
269 MX7D_PAD_SD3_CMD__SD3_CMD 0x59
270 MX7D_PAD_SD3_CLK__SD3_CLK 0x19
271 MX7D_PAD_SD3_DATA0__SD3_DATA0 0x59
272 MX7D_PAD_SD3_DATA1__SD3_DATA1 0x59
273 MX7D_PAD_SD3_DATA2__SD3_DATA2 0x59
274 MX7D_PAD_SD3_DATA3__SD3_DATA3 0x59
275 MX7D_PAD_SD3_DATA4__SD3_DATA4 0x59
276 MX7D_PAD_SD3_DATA5__SD3_DATA5 0x59
277 MX7D_PAD_SD3_DATA6__SD3_DATA6 0x59
278 MX7D_PAD_SD3_DATA7__SD3_DATA7 0x59
279 MX7D_PAD_SD3_STROBE__SD3_STROBE 0x19
280 >;
281 };
282};
283
284&iomuxc_lpsr {
285 pinctrl_usbotg1: usbotg1grp {
286 fsl,pins = <
287 MX7D_PAD_LPSR_GPIO1_IO05__GPIO1_IO5 0x14 /* OTG PWREN */
288 >;
289 };
290};