Loading...
1/*
2 * AT86RF230/RF231 driver
3 *
4 * Copyright (C) 2009-2012 Siemens AG
5 *
6 * This program is free software; you can redistribute it and/or modify
7 * it under the terms of the GNU General Public License version 2
8 * as published by the Free Software Foundation.
9 *
10 * This program is distributed in the hope that it will be useful,
11 * but WITHOUT ANY WARRANTY; without even the implied warranty of
12 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
13 * GNU General Public License for more details.
14 *
15 * Written by:
16 * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
17 * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
18 * Alexander Aring <aar@pengutronix.de>
19 */
20#include <linux/kernel.h>
21#include <linux/module.h>
22#include <linux/hrtimer.h>
23#include <linux/jiffies.h>
24#include <linux/interrupt.h>
25#include <linux/irq.h>
26#include <linux/gpio.h>
27#include <linux/delay.h>
28#include <linux/spi/spi.h>
29#include <linux/spi/at86rf230.h>
30#include <linux/regmap.h>
31#include <linux/skbuff.h>
32#include <linux/of_gpio.h>
33#include <linux/ieee802154.h>
34#include <linux/debugfs.h>
35
36#include <net/mac802154.h>
37#include <net/cfg802154.h>
38
39#include "at86rf230.h"
40
41struct at86rf230_local;
42/* at86rf2xx chip depend data.
43 * All timings are in us.
44 */
45struct at86rf2xx_chip_data {
46 u16 t_sleep_cycle;
47 u16 t_channel_switch;
48 u16 t_reset_to_off;
49 u16 t_off_to_aack;
50 u16 t_off_to_tx_on;
51 u16 t_off_to_sleep;
52 u16 t_sleep_to_off;
53 u16 t_frame;
54 u16 t_p_ack;
55 int rssi_base_val;
56
57 int (*set_channel)(struct at86rf230_local *, u8, u8);
58 int (*set_txpower)(struct at86rf230_local *, s32);
59};
60
61#define AT86RF2XX_MAX_BUF (127 + 3)
62/* tx retries to access the TX_ON state
63 * if it's above then force change will be started.
64 *
65 * We assume the max_frame_retries (7) value of 802.15.4 here.
66 */
67#define AT86RF2XX_MAX_TX_RETRIES 7
68/* We use the recommended 5 minutes timeout to recalibrate */
69#define AT86RF2XX_CAL_LOOP_TIMEOUT (5 * 60 * HZ)
70
71struct at86rf230_state_change {
72 struct at86rf230_local *lp;
73 int irq;
74
75 struct hrtimer timer;
76 struct spi_message msg;
77 struct spi_transfer trx;
78 u8 buf[AT86RF2XX_MAX_BUF];
79
80 void (*complete)(void *context);
81 u8 from_state;
82 u8 to_state;
83
84 bool free;
85};
86
87struct at86rf230_trac {
88 u64 success;
89 u64 success_data_pending;
90 u64 success_wait_for_ack;
91 u64 channel_access_failure;
92 u64 no_ack;
93 u64 invalid;
94};
95
96struct at86rf230_local {
97 struct spi_device *spi;
98
99 struct ieee802154_hw *hw;
100 struct at86rf2xx_chip_data *data;
101 struct regmap *regmap;
102 int slp_tr;
103 bool sleep;
104
105 struct completion state_complete;
106 struct at86rf230_state_change state;
107
108 unsigned long cal_timeout;
109 bool is_tx;
110 bool is_tx_from_off;
111 u8 tx_retry;
112 struct sk_buff *tx_skb;
113 struct at86rf230_state_change tx;
114
115 struct at86rf230_trac trac;
116};
117
118#define AT86RF2XX_NUMREGS 0x3F
119
120static void
121at86rf230_async_state_change(struct at86rf230_local *lp,
122 struct at86rf230_state_change *ctx,
123 const u8 state, void (*complete)(void *context));
124
125static inline void
126at86rf230_sleep(struct at86rf230_local *lp)
127{
128 if (gpio_is_valid(lp->slp_tr)) {
129 gpio_set_value(lp->slp_tr, 1);
130 usleep_range(lp->data->t_off_to_sleep,
131 lp->data->t_off_to_sleep + 10);
132 lp->sleep = true;
133 }
134}
135
136static inline void
137at86rf230_awake(struct at86rf230_local *lp)
138{
139 if (gpio_is_valid(lp->slp_tr)) {
140 gpio_set_value(lp->slp_tr, 0);
141 usleep_range(lp->data->t_sleep_to_off,
142 lp->data->t_sleep_to_off + 100);
143 lp->sleep = false;
144 }
145}
146
147static inline int
148__at86rf230_write(struct at86rf230_local *lp,
149 unsigned int addr, unsigned int data)
150{
151 bool sleep = lp->sleep;
152 int ret;
153
154 /* awake for register setting if sleep */
155 if (sleep)
156 at86rf230_awake(lp);
157
158 ret = regmap_write(lp->regmap, addr, data);
159
160 /* sleep again if was sleeping */
161 if (sleep)
162 at86rf230_sleep(lp);
163
164 return ret;
165}
166
167static inline int
168__at86rf230_read(struct at86rf230_local *lp,
169 unsigned int addr, unsigned int *data)
170{
171 bool sleep = lp->sleep;
172 int ret;
173
174 /* awake for register setting if sleep */
175 if (sleep)
176 at86rf230_awake(lp);
177
178 ret = regmap_read(lp->regmap, addr, data);
179
180 /* sleep again if was sleeping */
181 if (sleep)
182 at86rf230_sleep(lp);
183
184 return ret;
185}
186
187static inline int
188at86rf230_read_subreg(struct at86rf230_local *lp,
189 unsigned int addr, unsigned int mask,
190 unsigned int shift, unsigned int *data)
191{
192 int rc;
193
194 rc = __at86rf230_read(lp, addr, data);
195 if (!rc)
196 *data = (*data & mask) >> shift;
197
198 return rc;
199}
200
201static inline int
202at86rf230_write_subreg(struct at86rf230_local *lp,
203 unsigned int addr, unsigned int mask,
204 unsigned int shift, unsigned int data)
205{
206 bool sleep = lp->sleep;
207 int ret;
208
209 /* awake for register setting if sleep */
210 if (sleep)
211 at86rf230_awake(lp);
212
213 ret = regmap_update_bits(lp->regmap, addr, mask, data << shift);
214
215 /* sleep again if was sleeping */
216 if (sleep)
217 at86rf230_sleep(lp);
218
219 return ret;
220}
221
222static inline void
223at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
224{
225 gpio_set_value(lp->slp_tr, 1);
226 udelay(1);
227 gpio_set_value(lp->slp_tr, 0);
228}
229
230static bool
231at86rf230_reg_writeable(struct device *dev, unsigned int reg)
232{
233 switch (reg) {
234 case RG_TRX_STATE:
235 case RG_TRX_CTRL_0:
236 case RG_TRX_CTRL_1:
237 case RG_PHY_TX_PWR:
238 case RG_PHY_ED_LEVEL:
239 case RG_PHY_CC_CCA:
240 case RG_CCA_THRES:
241 case RG_RX_CTRL:
242 case RG_SFD_VALUE:
243 case RG_TRX_CTRL_2:
244 case RG_ANT_DIV:
245 case RG_IRQ_MASK:
246 case RG_VREG_CTRL:
247 case RG_BATMON:
248 case RG_XOSC_CTRL:
249 case RG_RX_SYN:
250 case RG_XAH_CTRL_1:
251 case RG_FTN_CTRL:
252 case RG_PLL_CF:
253 case RG_PLL_DCU:
254 case RG_SHORT_ADDR_0:
255 case RG_SHORT_ADDR_1:
256 case RG_PAN_ID_0:
257 case RG_PAN_ID_1:
258 case RG_IEEE_ADDR_0:
259 case RG_IEEE_ADDR_1:
260 case RG_IEEE_ADDR_2:
261 case RG_IEEE_ADDR_3:
262 case RG_IEEE_ADDR_4:
263 case RG_IEEE_ADDR_5:
264 case RG_IEEE_ADDR_6:
265 case RG_IEEE_ADDR_7:
266 case RG_XAH_CTRL_0:
267 case RG_CSMA_SEED_0:
268 case RG_CSMA_SEED_1:
269 case RG_CSMA_BE:
270 return true;
271 default:
272 return false;
273 }
274}
275
276static bool
277at86rf230_reg_readable(struct device *dev, unsigned int reg)
278{
279 bool rc;
280
281 /* all writeable are also readable */
282 rc = at86rf230_reg_writeable(dev, reg);
283 if (rc)
284 return rc;
285
286 /* readonly regs */
287 switch (reg) {
288 case RG_TRX_STATUS:
289 case RG_PHY_RSSI:
290 case RG_IRQ_STATUS:
291 case RG_PART_NUM:
292 case RG_VERSION_NUM:
293 case RG_MAN_ID_1:
294 case RG_MAN_ID_0:
295 return true;
296 default:
297 return false;
298 }
299}
300
301static bool
302at86rf230_reg_volatile(struct device *dev, unsigned int reg)
303{
304 /* can be changed during runtime */
305 switch (reg) {
306 case RG_TRX_STATUS:
307 case RG_TRX_STATE:
308 case RG_PHY_RSSI:
309 case RG_PHY_ED_LEVEL:
310 case RG_IRQ_STATUS:
311 case RG_VREG_CTRL:
312 case RG_PLL_CF:
313 case RG_PLL_DCU:
314 return true;
315 default:
316 return false;
317 }
318}
319
320static bool
321at86rf230_reg_precious(struct device *dev, unsigned int reg)
322{
323 /* don't clear irq line on read */
324 switch (reg) {
325 case RG_IRQ_STATUS:
326 return true;
327 default:
328 return false;
329 }
330}
331
332static const struct regmap_config at86rf230_regmap_spi_config = {
333 .reg_bits = 8,
334 .val_bits = 8,
335 .write_flag_mask = CMD_REG | CMD_WRITE,
336 .read_flag_mask = CMD_REG,
337 .cache_type = REGCACHE_RBTREE,
338 .max_register = AT86RF2XX_NUMREGS,
339 .writeable_reg = at86rf230_reg_writeable,
340 .readable_reg = at86rf230_reg_readable,
341 .volatile_reg = at86rf230_reg_volatile,
342 .precious_reg = at86rf230_reg_precious,
343};
344
345static void
346at86rf230_async_error_recover_complete(void *context)
347{
348 struct at86rf230_state_change *ctx = context;
349 struct at86rf230_local *lp = ctx->lp;
350
351 if (ctx->free)
352 kfree(ctx);
353
354 ieee802154_wake_queue(lp->hw);
355}
356
357static void
358at86rf230_async_error_recover(void *context)
359{
360 struct at86rf230_state_change *ctx = context;
361 struct at86rf230_local *lp = ctx->lp;
362
363 lp->is_tx = 0;
364 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
365 at86rf230_async_error_recover_complete);
366}
367
368static inline void
369at86rf230_async_error(struct at86rf230_local *lp,
370 struct at86rf230_state_change *ctx, int rc)
371{
372 dev_err(&lp->spi->dev, "spi_async error %d\n", rc);
373
374 at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF,
375 at86rf230_async_error_recover);
376}
377
378/* Generic function to get some register value in async mode */
379static void
380at86rf230_async_read_reg(struct at86rf230_local *lp, u8 reg,
381 struct at86rf230_state_change *ctx,
382 void (*complete)(void *context))
383{
384 int rc;
385
386 u8 *tx_buf = ctx->buf;
387
388 tx_buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
389 ctx->msg.complete = complete;
390 rc = spi_async(lp->spi, &ctx->msg);
391 if (rc)
392 at86rf230_async_error(lp, ctx, rc);
393}
394
395static void
396at86rf230_async_write_reg(struct at86rf230_local *lp, u8 reg, u8 val,
397 struct at86rf230_state_change *ctx,
398 void (*complete)(void *context))
399{
400 int rc;
401
402 ctx->buf[0] = (reg & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
403 ctx->buf[1] = val;
404 ctx->msg.complete = complete;
405 rc = spi_async(lp->spi, &ctx->msg);
406 if (rc)
407 at86rf230_async_error(lp, ctx, rc);
408}
409
410static void
411at86rf230_async_state_assert(void *context)
412{
413 struct at86rf230_state_change *ctx = context;
414 struct at86rf230_local *lp = ctx->lp;
415 const u8 *buf = ctx->buf;
416 const u8 trx_state = buf[1] & TRX_STATE_MASK;
417
418 /* Assert state change */
419 if (trx_state != ctx->to_state) {
420 /* Special handling if transceiver state is in
421 * STATE_BUSY_RX_AACK and a SHR was detected.
422 */
423 if (trx_state == STATE_BUSY_RX_AACK) {
424 /* Undocumented race condition. If we send a state
425 * change to STATE_RX_AACK_ON the transceiver could
426 * change his state automatically to STATE_BUSY_RX_AACK
427 * if a SHR was detected. This is not an error, but we
428 * can't assert this.
429 */
430 if (ctx->to_state == STATE_RX_AACK_ON)
431 goto done;
432
433 /* If we change to STATE_TX_ON without forcing and
434 * transceiver state is STATE_BUSY_RX_AACK, we wait
435 * 'tFrame + tPAck' receiving time. In this time the
436 * PDU should be received. If the transceiver is still
437 * in STATE_BUSY_RX_AACK, we run a force state change
438 * to STATE_TX_ON. This is a timeout handling, if the
439 * transceiver stucks in STATE_BUSY_RX_AACK.
440 *
441 * Additional we do several retries to try to get into
442 * TX_ON state without forcing. If the retries are
443 * higher or equal than AT86RF2XX_MAX_TX_RETRIES we
444 * will do a force change.
445 */
446 if (ctx->to_state == STATE_TX_ON ||
447 ctx->to_state == STATE_TRX_OFF) {
448 u8 state = ctx->to_state;
449
450 if (lp->tx_retry >= AT86RF2XX_MAX_TX_RETRIES)
451 state = STATE_FORCE_TRX_OFF;
452 lp->tx_retry++;
453
454 at86rf230_async_state_change(lp, ctx, state,
455 ctx->complete);
456 return;
457 }
458 }
459
460 dev_warn(&lp->spi->dev, "unexcept state change from 0x%02x to 0x%02x. Actual state: 0x%02x\n",
461 ctx->from_state, ctx->to_state, trx_state);
462 }
463
464done:
465 if (ctx->complete)
466 ctx->complete(context);
467}
468
469static enum hrtimer_restart at86rf230_async_state_timer(struct hrtimer *timer)
470{
471 struct at86rf230_state_change *ctx =
472 container_of(timer, struct at86rf230_state_change, timer);
473 struct at86rf230_local *lp = ctx->lp;
474
475 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
476 at86rf230_async_state_assert);
477
478 return HRTIMER_NORESTART;
479}
480
481/* Do state change timing delay. */
482static void
483at86rf230_async_state_delay(void *context)
484{
485 struct at86rf230_state_change *ctx = context;
486 struct at86rf230_local *lp = ctx->lp;
487 struct at86rf2xx_chip_data *c = lp->data;
488 bool force = false;
489 ktime_t tim;
490
491 /* The force state changes are will show as normal states in the
492 * state status subregister. We change the to_state to the
493 * corresponding one and remember if it was a force change, this
494 * differs if we do a state change from STATE_BUSY_RX_AACK.
495 */
496 switch (ctx->to_state) {
497 case STATE_FORCE_TX_ON:
498 ctx->to_state = STATE_TX_ON;
499 force = true;
500 break;
501 case STATE_FORCE_TRX_OFF:
502 ctx->to_state = STATE_TRX_OFF;
503 force = true;
504 break;
505 default:
506 break;
507 }
508
509 switch (ctx->from_state) {
510 case STATE_TRX_OFF:
511 switch (ctx->to_state) {
512 case STATE_RX_AACK_ON:
513 tim = c->t_off_to_aack * NSEC_PER_USEC;
514 /* state change from TRX_OFF to RX_AACK_ON to do a
515 * calibration, we need to reset the timeout for the
516 * next one.
517 */
518 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
519 goto change;
520 case STATE_TX_ARET_ON:
521 case STATE_TX_ON:
522 tim = c->t_off_to_tx_on * NSEC_PER_USEC;
523 /* state change from TRX_OFF to TX_ON or ARET_ON to do
524 * a calibration, we need to reset the timeout for the
525 * next one.
526 */
527 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
528 goto change;
529 default:
530 break;
531 }
532 break;
533 case STATE_BUSY_RX_AACK:
534 switch (ctx->to_state) {
535 case STATE_TRX_OFF:
536 case STATE_TX_ON:
537 /* Wait for worst case receiving time if we
538 * didn't make a force change from BUSY_RX_AACK
539 * to TX_ON or TRX_OFF.
540 */
541 if (!force) {
542 tim = (c->t_frame + c->t_p_ack) * NSEC_PER_USEC;
543 goto change;
544 }
545 break;
546 default:
547 break;
548 }
549 break;
550 /* Default value, means RESET state */
551 case STATE_P_ON:
552 switch (ctx->to_state) {
553 case STATE_TRX_OFF:
554 tim = c->t_reset_to_off * NSEC_PER_USEC;
555 goto change;
556 default:
557 break;
558 }
559 break;
560 default:
561 break;
562 }
563
564 /* Default delay is 1us in the most cases */
565 udelay(1);
566 at86rf230_async_state_timer(&ctx->timer);
567 return;
568
569change:
570 hrtimer_start(&ctx->timer, tim, HRTIMER_MODE_REL);
571}
572
573static void
574at86rf230_async_state_change_start(void *context)
575{
576 struct at86rf230_state_change *ctx = context;
577 struct at86rf230_local *lp = ctx->lp;
578 u8 *buf = ctx->buf;
579 const u8 trx_state = buf[1] & TRX_STATE_MASK;
580
581 /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */
582 if (trx_state == STATE_TRANSITION_IN_PROGRESS) {
583 udelay(1);
584 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
585 at86rf230_async_state_change_start);
586 return;
587 }
588
589 /* Check if we already are in the state which we change in */
590 if (trx_state == ctx->to_state) {
591 if (ctx->complete)
592 ctx->complete(context);
593 return;
594 }
595
596 /* Set current state to the context of state change */
597 ctx->from_state = trx_state;
598
599 /* Going into the next step for a state change which do a timing
600 * relevant delay.
601 */
602 at86rf230_async_write_reg(lp, RG_TRX_STATE, ctx->to_state, ctx,
603 at86rf230_async_state_delay);
604}
605
606static void
607at86rf230_async_state_change(struct at86rf230_local *lp,
608 struct at86rf230_state_change *ctx,
609 const u8 state, void (*complete)(void *context))
610{
611 /* Initialization for the state change context */
612 ctx->to_state = state;
613 ctx->complete = complete;
614 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
615 at86rf230_async_state_change_start);
616}
617
618static void
619at86rf230_sync_state_change_complete(void *context)
620{
621 struct at86rf230_state_change *ctx = context;
622 struct at86rf230_local *lp = ctx->lp;
623
624 complete(&lp->state_complete);
625}
626
627/* This function do a sync framework above the async state change.
628 * Some callbacks of the IEEE 802.15.4 driver interface need to be
629 * handled synchronously.
630 */
631static int
632at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
633{
634 unsigned long rc;
635
636 at86rf230_async_state_change(lp, &lp->state, state,
637 at86rf230_sync_state_change_complete);
638
639 rc = wait_for_completion_timeout(&lp->state_complete,
640 msecs_to_jiffies(100));
641 if (!rc) {
642 at86rf230_async_error(lp, &lp->state, -ETIMEDOUT);
643 return -ETIMEDOUT;
644 }
645
646 return 0;
647}
648
649static void
650at86rf230_tx_complete(void *context)
651{
652 struct at86rf230_state_change *ctx = context;
653 struct at86rf230_local *lp = ctx->lp;
654
655 ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
656 kfree(ctx);
657}
658
659static void
660at86rf230_tx_on(void *context)
661{
662 struct at86rf230_state_change *ctx = context;
663 struct at86rf230_local *lp = ctx->lp;
664
665 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
666 at86rf230_tx_complete);
667}
668
669static void
670at86rf230_tx_trac_check(void *context)
671{
672 struct at86rf230_state_change *ctx = context;
673 struct at86rf230_local *lp = ctx->lp;
674
675 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
676 u8 trac = TRAC_MASK(ctx->buf[1]);
677
678 switch (trac) {
679 case TRAC_SUCCESS:
680 lp->trac.success++;
681 break;
682 case TRAC_SUCCESS_DATA_PENDING:
683 lp->trac.success_data_pending++;
684 break;
685 case TRAC_CHANNEL_ACCESS_FAILURE:
686 lp->trac.channel_access_failure++;
687 break;
688 case TRAC_NO_ACK:
689 lp->trac.no_ack++;
690 break;
691 case TRAC_INVALID:
692 lp->trac.invalid++;
693 break;
694 default:
695 WARN_ONCE(1, "received tx trac status %d\n", trac);
696 break;
697 }
698 }
699
700 at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_tx_on);
701}
702
703static void
704at86rf230_rx_read_frame_complete(void *context)
705{
706 struct at86rf230_state_change *ctx = context;
707 struct at86rf230_local *lp = ctx->lp;
708 const u8 *buf = ctx->buf;
709 struct sk_buff *skb;
710 u8 len, lqi;
711
712 len = buf[1];
713 if (!ieee802154_is_valid_psdu_len(len)) {
714 dev_vdbg(&lp->spi->dev, "corrupted frame received\n");
715 len = IEEE802154_MTU;
716 }
717 lqi = buf[2 + len];
718
719 skb = dev_alloc_skb(IEEE802154_MTU);
720 if (!skb) {
721 dev_vdbg(&lp->spi->dev, "failed to allocate sk_buff\n");
722 kfree(ctx);
723 return;
724 }
725
726 skb_put_data(skb, buf + 2, len);
727 ieee802154_rx_irqsafe(lp->hw, skb, lqi);
728 kfree(ctx);
729}
730
731static void
732at86rf230_rx_trac_check(void *context)
733{
734 struct at86rf230_state_change *ctx = context;
735 struct at86rf230_local *lp = ctx->lp;
736 u8 *buf = ctx->buf;
737 int rc;
738
739 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
740 u8 trac = TRAC_MASK(buf[1]);
741
742 switch (trac) {
743 case TRAC_SUCCESS:
744 lp->trac.success++;
745 break;
746 case TRAC_SUCCESS_WAIT_FOR_ACK:
747 lp->trac.success_wait_for_ack++;
748 break;
749 case TRAC_INVALID:
750 lp->trac.invalid++;
751 break;
752 default:
753 WARN_ONCE(1, "received rx trac status %d\n", trac);
754 break;
755 }
756 }
757
758 buf[0] = CMD_FB;
759 ctx->trx.len = AT86RF2XX_MAX_BUF;
760 ctx->msg.complete = at86rf230_rx_read_frame_complete;
761 rc = spi_async(lp->spi, &ctx->msg);
762 if (rc) {
763 ctx->trx.len = 2;
764 at86rf230_async_error(lp, ctx, rc);
765 }
766}
767
768static void
769at86rf230_irq_trx_end(void *context)
770{
771 struct at86rf230_state_change *ctx = context;
772 struct at86rf230_local *lp = ctx->lp;
773
774 if (lp->is_tx) {
775 lp->is_tx = 0;
776 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
777 at86rf230_tx_trac_check);
778 } else {
779 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
780 at86rf230_rx_trac_check);
781 }
782}
783
784static void
785at86rf230_irq_status(void *context)
786{
787 struct at86rf230_state_change *ctx = context;
788 struct at86rf230_local *lp = ctx->lp;
789 const u8 *buf = ctx->buf;
790 u8 irq = buf[1];
791
792 enable_irq(lp->spi->irq);
793
794 if (irq & IRQ_TRX_END) {
795 at86rf230_irq_trx_end(ctx);
796 } else {
797 dev_err(&lp->spi->dev, "not supported irq %02x received\n",
798 irq);
799 kfree(ctx);
800 }
801}
802
803static void
804at86rf230_setup_spi_messages(struct at86rf230_local *lp,
805 struct at86rf230_state_change *state)
806{
807 state->lp = lp;
808 state->irq = lp->spi->irq;
809 spi_message_init(&state->msg);
810 state->msg.context = state;
811 state->trx.len = 2;
812 state->trx.tx_buf = state->buf;
813 state->trx.rx_buf = state->buf;
814 spi_message_add_tail(&state->trx, &state->msg);
815 hrtimer_init(&state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
816 state->timer.function = at86rf230_async_state_timer;
817}
818
819static irqreturn_t at86rf230_isr(int irq, void *data)
820{
821 struct at86rf230_local *lp = data;
822 struct at86rf230_state_change *ctx;
823 int rc;
824
825 disable_irq_nosync(irq);
826
827 ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC);
828 if (!ctx) {
829 enable_irq(irq);
830 return IRQ_NONE;
831 }
832
833 at86rf230_setup_spi_messages(lp, ctx);
834 /* tell on error handling to free ctx */
835 ctx->free = true;
836
837 ctx->buf[0] = (RG_IRQ_STATUS & CMD_REG_MASK) | CMD_REG;
838 ctx->msg.complete = at86rf230_irq_status;
839 rc = spi_async(lp->spi, &ctx->msg);
840 if (rc) {
841 at86rf230_async_error(lp, ctx, rc);
842 enable_irq(irq);
843 return IRQ_NONE;
844 }
845
846 return IRQ_HANDLED;
847}
848
849static void
850at86rf230_write_frame_complete(void *context)
851{
852 struct at86rf230_state_change *ctx = context;
853 struct at86rf230_local *lp = ctx->lp;
854
855 ctx->trx.len = 2;
856
857 if (gpio_is_valid(lp->slp_tr))
858 at86rf230_slp_tr_rising_edge(lp);
859 else
860 at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx,
861 NULL);
862}
863
864static void
865at86rf230_write_frame(void *context)
866{
867 struct at86rf230_state_change *ctx = context;
868 struct at86rf230_local *lp = ctx->lp;
869 struct sk_buff *skb = lp->tx_skb;
870 u8 *buf = ctx->buf;
871 int rc;
872
873 lp->is_tx = 1;
874
875 buf[0] = CMD_FB | CMD_WRITE;
876 buf[1] = skb->len + 2;
877 memcpy(buf + 2, skb->data, skb->len);
878 ctx->trx.len = skb->len + 2;
879 ctx->msg.complete = at86rf230_write_frame_complete;
880 rc = spi_async(lp->spi, &ctx->msg);
881 if (rc) {
882 ctx->trx.len = 2;
883 at86rf230_async_error(lp, ctx, rc);
884 }
885}
886
887static void
888at86rf230_xmit_tx_on(void *context)
889{
890 struct at86rf230_state_change *ctx = context;
891 struct at86rf230_local *lp = ctx->lp;
892
893 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
894 at86rf230_write_frame);
895}
896
897static void
898at86rf230_xmit_start(void *context)
899{
900 struct at86rf230_state_change *ctx = context;
901 struct at86rf230_local *lp = ctx->lp;
902
903 /* check if we change from off state */
904 if (lp->is_tx_from_off)
905 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
906 at86rf230_write_frame);
907 else
908 at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
909 at86rf230_xmit_tx_on);
910}
911
912static int
913at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
914{
915 struct at86rf230_local *lp = hw->priv;
916 struct at86rf230_state_change *ctx = &lp->tx;
917
918 lp->tx_skb = skb;
919 lp->tx_retry = 0;
920
921 /* After 5 minutes in PLL and the same frequency we run again the
922 * calibration loops which is recommended by at86rf2xx datasheets.
923 *
924 * The calibration is initiate by a state change from TRX_OFF
925 * to TX_ON, the lp->cal_timeout should be reinit by state_delay
926 * function then to start in the next 5 minutes.
927 */
928 if (time_is_before_jiffies(lp->cal_timeout)) {
929 lp->is_tx_from_off = true;
930 at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF,
931 at86rf230_xmit_start);
932 } else {
933 lp->is_tx_from_off = false;
934 at86rf230_xmit_start(ctx);
935 }
936
937 return 0;
938}
939
940static int
941at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
942{
943 BUG_ON(!level);
944 *level = 0xbe;
945 return 0;
946}
947
948static int
949at86rf230_start(struct ieee802154_hw *hw)
950{
951 struct at86rf230_local *lp = hw->priv;
952
953 /* reset trac stats on start */
954 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS))
955 memset(&lp->trac, 0, sizeof(struct at86rf230_trac));
956
957 at86rf230_awake(lp);
958 enable_irq(lp->spi->irq);
959
960 return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON);
961}
962
963static void
964at86rf230_stop(struct ieee802154_hw *hw)
965{
966 struct at86rf230_local *lp = hw->priv;
967 u8 csma_seed[2];
968
969 at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
970
971 disable_irq(lp->spi->irq);
972
973 /* It's recommended to set random new csma_seeds before sleep state.
974 * Makes only sense in the stop callback, not doing this inside of
975 * at86rf230_sleep, this is also used when we don't transmit afterwards
976 * when calling start callback again.
977 */
978 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
979 at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
980 at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
981
982 at86rf230_sleep(lp);
983}
984
985static int
986at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
987{
988 return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
989}
990
991#define AT86RF2XX_MAX_ED_LEVELS 0xF
992static const s32 at86rf233_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
993 -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, -7800, -7600,
994 -7400, -7200, -7000, -6800, -6600, -6400,
995};
996
997static const s32 at86rf231_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
998 -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
999 -7100, -6900, -6700, -6500, -6300, -6100,
1000};
1001
1002static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
1003 -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
1004 -8000, -7800, -7600, -7400, -7200, -7000,
1005};
1006
1007static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
1008 -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
1009 -7800, -7600, -7400, -7200, -7000, -6800,
1010};
1011
1012static inline int
1013at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val)
1014{
1015 unsigned int cca_ed_thres;
1016 int rc;
1017
1018 rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres);
1019 if (rc < 0)
1020 return rc;
1021
1022 switch (rssi_base_val) {
1023 case -98:
1024 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
1025 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
1026 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
1027 break;
1028 case -100:
1029 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
1030 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
1031 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
1032 break;
1033 default:
1034 WARN_ON(1);
1035 }
1036
1037 return 0;
1038}
1039
1040static int
1041at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
1042{
1043 int rc;
1044
1045 if (channel == 0)
1046 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
1047 else
1048 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
1049 if (rc < 0)
1050 return rc;
1051
1052 if (page == 0) {
1053 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
1054 lp->data->rssi_base_val = -100;
1055 } else {
1056 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
1057 lp->data->rssi_base_val = -98;
1058 }
1059 if (rc < 0)
1060 return rc;
1061
1062 rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val);
1063 if (rc < 0)
1064 return rc;
1065
1066 /* This sets the symbol_duration according frequency on the 212.
1067 * TODO move this handling while set channel and page in cfg802154.
1068 * We can do that, this timings are according 802.15.4 standard.
1069 * If we do that in cfg802154, this is a more generic calculation.
1070 *
1071 * This should also protected from ifs_timer. Means cancel timer and
1072 * init with a new value. For now, this is okay.
1073 */
1074 if (channel == 0) {
1075 if (page == 0) {
1076 /* SUB:0 and BPSK:0 -> BPSK-20 */
1077 lp->hw->phy->symbol_duration = 50;
1078 } else {
1079 /* SUB:1 and BPSK:0 -> BPSK-40 */
1080 lp->hw->phy->symbol_duration = 25;
1081 }
1082 } else {
1083 if (page == 0)
1084 /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
1085 lp->hw->phy->symbol_duration = 40;
1086 else
1087 /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
1088 lp->hw->phy->symbol_duration = 16;
1089 }
1090
1091 lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD *
1092 lp->hw->phy->symbol_duration;
1093 lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD *
1094 lp->hw->phy->symbol_duration;
1095
1096 return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
1097}
1098
1099static int
1100at86rf230_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
1101{
1102 struct at86rf230_local *lp = hw->priv;
1103 int rc;
1104
1105 rc = lp->data->set_channel(lp, page, channel);
1106 /* Wait for PLL */
1107 usleep_range(lp->data->t_channel_switch,
1108 lp->data->t_channel_switch + 10);
1109
1110 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
1111 return rc;
1112}
1113
1114static int
1115at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
1116 struct ieee802154_hw_addr_filt *filt,
1117 unsigned long changed)
1118{
1119 struct at86rf230_local *lp = hw->priv;
1120
1121 if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
1122 u16 addr = le16_to_cpu(filt->short_addr);
1123
1124 dev_vdbg(&lp->spi->dev,
1125 "at86rf230_set_hw_addr_filt called for saddr\n");
1126 __at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
1127 __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
1128 }
1129
1130 if (changed & IEEE802154_AFILT_PANID_CHANGED) {
1131 u16 pan = le16_to_cpu(filt->pan_id);
1132
1133 dev_vdbg(&lp->spi->dev,
1134 "at86rf230_set_hw_addr_filt called for pan id\n");
1135 __at86rf230_write(lp, RG_PAN_ID_0, pan);
1136 __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
1137 }
1138
1139 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
1140 u8 i, addr[8];
1141
1142 memcpy(addr, &filt->ieee_addr, 8);
1143 dev_vdbg(&lp->spi->dev,
1144 "at86rf230_set_hw_addr_filt called for IEEE addr\n");
1145 for (i = 0; i < 8; i++)
1146 __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
1147 }
1148
1149 if (changed & IEEE802154_AFILT_PANC_CHANGED) {
1150 dev_vdbg(&lp->spi->dev,
1151 "at86rf230_set_hw_addr_filt called for panc change\n");
1152 if (filt->pan_coord)
1153 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1);
1154 else
1155 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0);
1156 }
1157
1158 return 0;
1159}
1160
1161#define AT86RF23X_MAX_TX_POWERS 0xF
1162static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
1163 400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600,
1164 -800, -1200, -1700,
1165};
1166
1167static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
1168 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
1169 -900, -1200, -1700,
1170};
1171
1172#define AT86RF212_MAX_TX_POWERS 0x1F
1173static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
1174 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
1175 -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
1176 -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
1177};
1178
1179static int
1180at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm)
1181{
1182 u32 i;
1183
1184 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
1185 if (lp->hw->phy->supported.tx_powers[i] == mbm)
1186 return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i);
1187 }
1188
1189 return -EINVAL;
1190}
1191
1192static int
1193at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm)
1194{
1195 u32 i;
1196
1197 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
1198 if (lp->hw->phy->supported.tx_powers[i] == mbm)
1199 return at86rf230_write_subreg(lp, SR_TX_PWR_212, i);
1200 }
1201
1202 return -EINVAL;
1203}
1204
1205static int
1206at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm)
1207{
1208 struct at86rf230_local *lp = hw->priv;
1209
1210 return lp->data->set_txpower(lp, mbm);
1211}
1212
1213static int
1214at86rf230_set_lbt(struct ieee802154_hw *hw, bool on)
1215{
1216 struct at86rf230_local *lp = hw->priv;
1217
1218 return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
1219}
1220
1221static int
1222at86rf230_set_cca_mode(struct ieee802154_hw *hw,
1223 const struct wpan_phy_cca *cca)
1224{
1225 struct at86rf230_local *lp = hw->priv;
1226 u8 val;
1227
1228 /* mapping 802.15.4 to driver spec */
1229 switch (cca->mode) {
1230 case NL802154_CCA_ENERGY:
1231 val = 1;
1232 break;
1233 case NL802154_CCA_CARRIER:
1234 val = 2;
1235 break;
1236 case NL802154_CCA_ENERGY_CARRIER:
1237 switch (cca->opt) {
1238 case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
1239 val = 3;
1240 break;
1241 case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
1242 val = 0;
1243 break;
1244 default:
1245 return -EINVAL;
1246 }
1247 break;
1248 default:
1249 return -EINVAL;
1250 }
1251
1252 return at86rf230_write_subreg(lp, SR_CCA_MODE, val);
1253}
1254
1255
1256static int
1257at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
1258{
1259 struct at86rf230_local *lp = hw->priv;
1260 u32 i;
1261
1262 for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
1263 if (hw->phy->supported.cca_ed_levels[i] == mbm)
1264 return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i);
1265 }
1266
1267 return -EINVAL;
1268}
1269
1270static int
1271at86rf230_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
1272 u8 retries)
1273{
1274 struct at86rf230_local *lp = hw->priv;
1275 int rc;
1276
1277 rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
1278 if (rc)
1279 return rc;
1280
1281 rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
1282 if (rc)
1283 return rc;
1284
1285 return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, retries);
1286}
1287
1288static int
1289at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
1290{
1291 struct at86rf230_local *lp = hw->priv;
1292
1293 return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
1294}
1295
1296static int
1297at86rf230_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
1298{
1299 struct at86rf230_local *lp = hw->priv;
1300 int rc;
1301
1302 if (on) {
1303 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 1);
1304 if (rc < 0)
1305 return rc;
1306
1307 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 1);
1308 if (rc < 0)
1309 return rc;
1310 } else {
1311 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 0);
1312 if (rc < 0)
1313 return rc;
1314
1315 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 0);
1316 if (rc < 0)
1317 return rc;
1318 }
1319
1320 return 0;
1321}
1322
1323static const struct ieee802154_ops at86rf230_ops = {
1324 .owner = THIS_MODULE,
1325 .xmit_async = at86rf230_xmit,
1326 .ed = at86rf230_ed,
1327 .set_channel = at86rf230_channel,
1328 .start = at86rf230_start,
1329 .stop = at86rf230_stop,
1330 .set_hw_addr_filt = at86rf230_set_hw_addr_filt,
1331 .set_txpower = at86rf230_set_txpower,
1332 .set_lbt = at86rf230_set_lbt,
1333 .set_cca_mode = at86rf230_set_cca_mode,
1334 .set_cca_ed_level = at86rf230_set_cca_ed_level,
1335 .set_csma_params = at86rf230_set_csma_params,
1336 .set_frame_retries = at86rf230_set_frame_retries,
1337 .set_promiscuous_mode = at86rf230_set_promiscuous_mode,
1338};
1339
1340static struct at86rf2xx_chip_data at86rf233_data = {
1341 .t_sleep_cycle = 330,
1342 .t_channel_switch = 11,
1343 .t_reset_to_off = 26,
1344 .t_off_to_aack = 80,
1345 .t_off_to_tx_on = 80,
1346 .t_off_to_sleep = 35,
1347 .t_sleep_to_off = 1000,
1348 .t_frame = 4096,
1349 .t_p_ack = 545,
1350 .rssi_base_val = -94,
1351 .set_channel = at86rf23x_set_channel,
1352 .set_txpower = at86rf23x_set_txpower,
1353};
1354
1355static struct at86rf2xx_chip_data at86rf231_data = {
1356 .t_sleep_cycle = 330,
1357 .t_channel_switch = 24,
1358 .t_reset_to_off = 37,
1359 .t_off_to_aack = 110,
1360 .t_off_to_tx_on = 110,
1361 .t_off_to_sleep = 35,
1362 .t_sleep_to_off = 1000,
1363 .t_frame = 4096,
1364 .t_p_ack = 545,
1365 .rssi_base_val = -91,
1366 .set_channel = at86rf23x_set_channel,
1367 .set_txpower = at86rf23x_set_txpower,
1368};
1369
1370static struct at86rf2xx_chip_data at86rf212_data = {
1371 .t_sleep_cycle = 330,
1372 .t_channel_switch = 11,
1373 .t_reset_to_off = 26,
1374 .t_off_to_aack = 200,
1375 .t_off_to_tx_on = 200,
1376 .t_off_to_sleep = 35,
1377 .t_sleep_to_off = 1000,
1378 .t_frame = 4096,
1379 .t_p_ack = 545,
1380 .rssi_base_val = -100,
1381 .set_channel = at86rf212_set_channel,
1382 .set_txpower = at86rf212_set_txpower,
1383};
1384
1385static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
1386{
1387 int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH;
1388 unsigned int dvdd;
1389 u8 csma_seed[2];
1390
1391 rc = at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
1392 if (rc)
1393 return rc;
1394
1395 irq_type = irq_get_trigger_type(lp->spi->irq);
1396 if (irq_type == IRQ_TYPE_EDGE_FALLING ||
1397 irq_type == IRQ_TYPE_LEVEL_LOW)
1398 irq_pol = IRQ_ACTIVE_LOW;
1399
1400 rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);
1401 if (rc)
1402 return rc;
1403
1404 rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1);
1405 if (rc)
1406 return rc;
1407
1408 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END);
1409 if (rc)
1410 return rc;
1411
1412 /* reset values differs in at86rf231 and at86rf233 */
1413 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0);
1414 if (rc)
1415 return rc;
1416
1417 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
1418 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
1419 if (rc)
1420 return rc;
1421 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
1422 if (rc)
1423 return rc;
1424
1425 /* CLKM changes are applied immediately */
1426 rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
1427 if (rc)
1428 return rc;
1429
1430 /* Turn CLKM Off */
1431 rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00);
1432 if (rc)
1433 return rc;
1434 /* Wait the next SLEEP cycle */
1435 usleep_range(lp->data->t_sleep_cycle,
1436 lp->data->t_sleep_cycle + 100);
1437
1438 /* xtal_trim value is calculated by:
1439 * CL = 0.5 * (CX + CTRIM + CPAR)
1440 *
1441 * whereas:
1442 * CL = capacitor of used crystal
1443 * CX = connected capacitors at xtal pins
1444 * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF,
1445 * but this is different on each board setup. You need to fine
1446 * tuning this value via CTRIM.
1447 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
1448 * 0 pF upto 4.5 pF.
1449 *
1450 * Examples:
1451 * atben transceiver:
1452 *
1453 * CL = 8 pF
1454 * CX = 12 pF
1455 * CPAR = 3 pF (We assume the magic constant from datasheet)
1456 * CTRIM = 0.9 pF
1457 *
1458 * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF
1459 *
1460 * xtal_trim = 0x3
1461 *
1462 * openlabs transceiver:
1463 *
1464 * CL = 16 pF
1465 * CX = 22 pF
1466 * CPAR = 3 pF (We assume the magic constant from datasheet)
1467 * CTRIM = 4.5 pF
1468 *
1469 * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF
1470 *
1471 * xtal_trim = 0xf
1472 */
1473 rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim);
1474 if (rc)
1475 return rc;
1476
1477 rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd);
1478 if (rc)
1479 return rc;
1480 if (!dvdd) {
1481 dev_err(&lp->spi->dev, "DVDD error\n");
1482 return -EINVAL;
1483 }
1484
1485 /* Force setting slotted operation bit to 0. Sometimes the atben
1486 * sets this bit and I don't know why. We set this always force
1487 * to zero while probing.
1488 */
1489 return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
1490}
1491
1492static int
1493at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
1494 u8 *xtal_trim)
1495{
1496 struct at86rf230_platform_data *pdata = spi->dev.platform_data;
1497 int ret;
1498
1499 if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
1500 if (!pdata)
1501 return -ENOENT;
1502
1503 *rstn = pdata->rstn;
1504 *slp_tr = pdata->slp_tr;
1505 *xtal_trim = pdata->xtal_trim;
1506 return 0;
1507 }
1508
1509 *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
1510 *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
1511 ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
1512 if (ret < 0 && ret != -EINVAL)
1513 return ret;
1514
1515 return 0;
1516}
1517
1518static int
1519at86rf230_detect_device(struct at86rf230_local *lp)
1520{
1521 unsigned int part, version, val;
1522 u16 man_id = 0;
1523 const char *chip;
1524 int rc;
1525
1526 rc = __at86rf230_read(lp, RG_MAN_ID_0, &val);
1527 if (rc)
1528 return rc;
1529 man_id |= val;
1530
1531 rc = __at86rf230_read(lp, RG_MAN_ID_1, &val);
1532 if (rc)
1533 return rc;
1534 man_id |= (val << 8);
1535
1536 rc = __at86rf230_read(lp, RG_PART_NUM, &part);
1537 if (rc)
1538 return rc;
1539
1540 rc = __at86rf230_read(lp, RG_VERSION_NUM, &version);
1541 if (rc)
1542 return rc;
1543
1544 if (man_id != 0x001f) {
1545 dev_err(&lp->spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
1546 man_id >> 8, man_id & 0xFF);
1547 return -EINVAL;
1548 }
1549
1550 lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
1551 IEEE802154_HW_CSMA_PARAMS |
1552 IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
1553 IEEE802154_HW_PROMISCUOUS;
1554
1555 lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
1556 WPAN_PHY_FLAG_CCA_ED_LEVEL |
1557 WPAN_PHY_FLAG_CCA_MODE;
1558
1559 lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
1560 BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
1561 lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
1562 BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
1563
1564 lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
1565
1566 switch (part) {
1567 case 2:
1568 chip = "at86rf230";
1569 rc = -ENOTSUPP;
1570 goto not_supp;
1571 case 3:
1572 chip = "at86rf231";
1573 lp->data = &at86rf231_data;
1574 lp->hw->phy->supported.channels[0] = 0x7FFF800;
1575 lp->hw->phy->current_channel = 11;
1576 lp->hw->phy->symbol_duration = 16;
1577 lp->hw->phy->supported.tx_powers = at86rf231_powers;
1578 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
1579 lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels;
1580 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf231_ed_levels);
1581 break;
1582 case 7:
1583 chip = "at86rf212";
1584 lp->data = &at86rf212_data;
1585 lp->hw->flags |= IEEE802154_HW_LBT;
1586 lp->hw->phy->supported.channels[0] = 0x00007FF;
1587 lp->hw->phy->supported.channels[2] = 0x00007FF;
1588 lp->hw->phy->current_channel = 5;
1589 lp->hw->phy->symbol_duration = 25;
1590 lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
1591 lp->hw->phy->supported.tx_powers = at86rf212_powers;
1592 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
1593 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
1594 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
1595 break;
1596 case 11:
1597 chip = "at86rf233";
1598 lp->data = &at86rf233_data;
1599 lp->hw->phy->supported.channels[0] = 0x7FFF800;
1600 lp->hw->phy->current_channel = 13;
1601 lp->hw->phy->symbol_duration = 16;
1602 lp->hw->phy->supported.tx_powers = at86rf233_powers;
1603 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
1604 lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels;
1605 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf233_ed_levels);
1606 break;
1607 default:
1608 chip = "unknown";
1609 rc = -ENOTSUPP;
1610 goto not_supp;
1611 }
1612
1613 lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7];
1614 lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0];
1615
1616not_supp:
1617 dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
1618
1619 return rc;
1620}
1621
1622#ifdef CONFIG_IEEE802154_AT86RF230_DEBUGFS
1623static struct dentry *at86rf230_debugfs_root;
1624
1625static int at86rf230_stats_show(struct seq_file *file, void *offset)
1626{
1627 struct at86rf230_local *lp = file->private;
1628
1629 seq_printf(file, "SUCCESS:\t\t%8llu\n", lp->trac.success);
1630 seq_printf(file, "SUCCESS_DATA_PENDING:\t%8llu\n",
1631 lp->trac.success_data_pending);
1632 seq_printf(file, "SUCCESS_WAIT_FOR_ACK:\t%8llu\n",
1633 lp->trac.success_wait_for_ack);
1634 seq_printf(file, "CHANNEL_ACCESS_FAILURE:\t%8llu\n",
1635 lp->trac.channel_access_failure);
1636 seq_printf(file, "NO_ACK:\t\t\t%8llu\n", lp->trac.no_ack);
1637 seq_printf(file, "INVALID:\t\t%8llu\n", lp->trac.invalid);
1638 return 0;
1639}
1640
1641static int at86rf230_stats_open(struct inode *inode, struct file *file)
1642{
1643 return single_open(file, at86rf230_stats_show, inode->i_private);
1644}
1645
1646static const struct file_operations at86rf230_stats_fops = {
1647 .open = at86rf230_stats_open,
1648 .read = seq_read,
1649 .llseek = seq_lseek,
1650 .release = single_release,
1651};
1652
1653static int at86rf230_debugfs_init(struct at86rf230_local *lp)
1654{
1655 char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "at86rf230-";
1656 struct dentry *stats;
1657
1658 strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN);
1659
1660 at86rf230_debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
1661 if (!at86rf230_debugfs_root)
1662 return -ENOMEM;
1663
1664 stats = debugfs_create_file("trac_stats", 0444,
1665 at86rf230_debugfs_root, lp,
1666 &at86rf230_stats_fops);
1667 if (!stats)
1668 return -ENOMEM;
1669
1670 return 0;
1671}
1672
1673static void at86rf230_debugfs_remove(void)
1674{
1675 debugfs_remove_recursive(at86rf230_debugfs_root);
1676}
1677#else
1678static int at86rf230_debugfs_init(struct at86rf230_local *lp) { return 0; }
1679static void at86rf230_debugfs_remove(void) { }
1680#endif
1681
1682static int at86rf230_probe(struct spi_device *spi)
1683{
1684 struct ieee802154_hw *hw;
1685 struct at86rf230_local *lp;
1686 unsigned int status;
1687 int rc, irq_type, rstn, slp_tr;
1688 u8 xtal_trim = 0;
1689
1690 if (!spi->irq) {
1691 dev_err(&spi->dev, "no IRQ specified\n");
1692 return -EINVAL;
1693 }
1694
1695 rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
1696 if (rc < 0) {
1697 dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
1698 return rc;
1699 }
1700
1701 if (gpio_is_valid(rstn)) {
1702 rc = devm_gpio_request_one(&spi->dev, rstn,
1703 GPIOF_OUT_INIT_HIGH, "rstn");
1704 if (rc)
1705 return rc;
1706 }
1707
1708 if (gpio_is_valid(slp_tr)) {
1709 rc = devm_gpio_request_one(&spi->dev, slp_tr,
1710 GPIOF_OUT_INIT_LOW, "slp_tr");
1711 if (rc)
1712 return rc;
1713 }
1714
1715 /* Reset */
1716 if (gpio_is_valid(rstn)) {
1717 udelay(1);
1718 gpio_set_value_cansleep(rstn, 0);
1719 udelay(1);
1720 gpio_set_value_cansleep(rstn, 1);
1721 usleep_range(120, 240);
1722 }
1723
1724 hw = ieee802154_alloc_hw(sizeof(*lp), &at86rf230_ops);
1725 if (!hw)
1726 return -ENOMEM;
1727
1728 lp = hw->priv;
1729 lp->hw = hw;
1730 lp->spi = spi;
1731 lp->slp_tr = slp_tr;
1732 hw->parent = &spi->dev;
1733 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
1734
1735 lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
1736 if (IS_ERR(lp->regmap)) {
1737 rc = PTR_ERR(lp->regmap);
1738 dev_err(&spi->dev, "Failed to allocate register map: %d\n",
1739 rc);
1740 goto free_dev;
1741 }
1742
1743 at86rf230_setup_spi_messages(lp, &lp->state);
1744 at86rf230_setup_spi_messages(lp, &lp->tx);
1745
1746 rc = at86rf230_detect_device(lp);
1747 if (rc < 0)
1748 goto free_dev;
1749
1750 init_completion(&lp->state_complete);
1751
1752 spi_set_drvdata(spi, lp);
1753
1754 rc = at86rf230_hw_init(lp, xtal_trim);
1755 if (rc)
1756 goto free_dev;
1757
1758 /* Read irq status register to reset irq line */
1759 rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
1760 if (rc)
1761 goto free_dev;
1762
1763 irq_type = irq_get_trigger_type(spi->irq);
1764 if (!irq_type)
1765 irq_type = IRQF_TRIGGER_HIGH;
1766
1767 rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
1768 IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);
1769 if (rc)
1770 goto free_dev;
1771
1772 /* disable_irq by default and wait for starting hardware */
1773 disable_irq(spi->irq);
1774
1775 /* going into sleep by default */
1776 at86rf230_sleep(lp);
1777
1778 rc = at86rf230_debugfs_init(lp);
1779 if (rc)
1780 goto free_dev;
1781
1782 rc = ieee802154_register_hw(lp->hw);
1783 if (rc)
1784 goto free_debugfs;
1785
1786 return rc;
1787
1788free_debugfs:
1789 at86rf230_debugfs_remove();
1790free_dev:
1791 ieee802154_free_hw(lp->hw);
1792
1793 return rc;
1794}
1795
1796static int at86rf230_remove(struct spi_device *spi)
1797{
1798 struct at86rf230_local *lp = spi_get_drvdata(spi);
1799
1800 /* mask all at86rf230 irq's */
1801 at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
1802 ieee802154_unregister_hw(lp->hw);
1803 ieee802154_free_hw(lp->hw);
1804 at86rf230_debugfs_remove();
1805 dev_dbg(&spi->dev, "unregistered at86rf230\n");
1806
1807 return 0;
1808}
1809
1810static const struct of_device_id at86rf230_of_match[] = {
1811 { .compatible = "atmel,at86rf230", },
1812 { .compatible = "atmel,at86rf231", },
1813 { .compatible = "atmel,at86rf233", },
1814 { .compatible = "atmel,at86rf212", },
1815 { },
1816};
1817MODULE_DEVICE_TABLE(of, at86rf230_of_match);
1818
1819static const struct spi_device_id at86rf230_device_id[] = {
1820 { .name = "at86rf230", },
1821 { .name = "at86rf231", },
1822 { .name = "at86rf233", },
1823 { .name = "at86rf212", },
1824 { },
1825};
1826MODULE_DEVICE_TABLE(spi, at86rf230_device_id);
1827
1828static struct spi_driver at86rf230_driver = {
1829 .id_table = at86rf230_device_id,
1830 .driver = {
1831 .of_match_table = of_match_ptr(at86rf230_of_match),
1832 .name = "at86rf230",
1833 },
1834 .probe = at86rf230_probe,
1835 .remove = at86rf230_remove,
1836};
1837
1838module_spi_driver(at86rf230_driver);
1839
1840MODULE_DESCRIPTION("AT86RF230 Transceiver Driver");
1841MODULE_LICENSE("GPL v2");
1// SPDX-License-Identifier: GPL-2.0-only
2/*
3 * AT86RF230/RF231 driver
4 *
5 * Copyright (C) 2009-2012 Siemens AG
6 *
7 * Written by:
8 * Dmitry Eremin-Solenikov <dbaryshkov@gmail.com>
9 * Alexander Smirnov <alex.bluesman.smirnov@gmail.com>
10 * Alexander Aring <aar@pengutronix.de>
11 */
12#include <linux/kernel.h>
13#include <linux/module.h>
14#include <linux/hrtimer.h>
15#include <linux/jiffies.h>
16#include <linux/interrupt.h>
17#include <linux/irq.h>
18#include <linux/gpio.h>
19#include <linux/delay.h>
20#include <linux/spi/spi.h>
21#include <linux/spi/at86rf230.h>
22#include <linux/regmap.h>
23#include <linux/skbuff.h>
24#include <linux/of_gpio.h>
25#include <linux/ieee802154.h>
26#include <linux/debugfs.h>
27
28#include <net/mac802154.h>
29#include <net/cfg802154.h>
30
31#include "at86rf230.h"
32
33struct at86rf230_local;
34/* at86rf2xx chip depend data.
35 * All timings are in us.
36 */
37struct at86rf2xx_chip_data {
38 u16 t_sleep_cycle;
39 u16 t_channel_switch;
40 u16 t_reset_to_off;
41 u16 t_off_to_aack;
42 u16 t_off_to_tx_on;
43 u16 t_off_to_sleep;
44 u16 t_sleep_to_off;
45 u16 t_frame;
46 u16 t_p_ack;
47 int rssi_base_val;
48
49 int (*set_channel)(struct at86rf230_local *, u8, u8);
50 int (*set_txpower)(struct at86rf230_local *, s32);
51};
52
53#define AT86RF2XX_MAX_BUF (127 + 3)
54/* tx retries to access the TX_ON state
55 * if it's above then force change will be started.
56 *
57 * We assume the max_frame_retries (7) value of 802.15.4 here.
58 */
59#define AT86RF2XX_MAX_TX_RETRIES 7
60/* We use the recommended 5 minutes timeout to recalibrate */
61#define AT86RF2XX_CAL_LOOP_TIMEOUT (5 * 60 * HZ)
62
63struct at86rf230_state_change {
64 struct at86rf230_local *lp;
65 int irq;
66
67 struct hrtimer timer;
68 struct spi_message msg;
69 struct spi_transfer trx;
70 u8 buf[AT86RF2XX_MAX_BUF];
71
72 void (*complete)(void *context);
73 u8 from_state;
74 u8 to_state;
75
76 bool free;
77};
78
79struct at86rf230_trac {
80 u64 success;
81 u64 success_data_pending;
82 u64 success_wait_for_ack;
83 u64 channel_access_failure;
84 u64 no_ack;
85 u64 invalid;
86};
87
88struct at86rf230_local {
89 struct spi_device *spi;
90
91 struct ieee802154_hw *hw;
92 struct at86rf2xx_chip_data *data;
93 struct regmap *regmap;
94 int slp_tr;
95 bool sleep;
96
97 struct completion state_complete;
98 struct at86rf230_state_change state;
99
100 unsigned long cal_timeout;
101 bool is_tx;
102 bool is_tx_from_off;
103 u8 tx_retry;
104 struct sk_buff *tx_skb;
105 struct at86rf230_state_change tx;
106
107 struct at86rf230_trac trac;
108};
109
110#define AT86RF2XX_NUMREGS 0x3F
111
112static void
113at86rf230_async_state_change(struct at86rf230_local *lp,
114 struct at86rf230_state_change *ctx,
115 const u8 state, void (*complete)(void *context));
116
117static inline void
118at86rf230_sleep(struct at86rf230_local *lp)
119{
120 if (gpio_is_valid(lp->slp_tr)) {
121 gpio_set_value(lp->slp_tr, 1);
122 usleep_range(lp->data->t_off_to_sleep,
123 lp->data->t_off_to_sleep + 10);
124 lp->sleep = true;
125 }
126}
127
128static inline void
129at86rf230_awake(struct at86rf230_local *lp)
130{
131 if (gpio_is_valid(lp->slp_tr)) {
132 gpio_set_value(lp->slp_tr, 0);
133 usleep_range(lp->data->t_sleep_to_off,
134 lp->data->t_sleep_to_off + 100);
135 lp->sleep = false;
136 }
137}
138
139static inline int
140__at86rf230_write(struct at86rf230_local *lp,
141 unsigned int addr, unsigned int data)
142{
143 bool sleep = lp->sleep;
144 int ret;
145
146 /* awake for register setting if sleep */
147 if (sleep)
148 at86rf230_awake(lp);
149
150 ret = regmap_write(lp->regmap, addr, data);
151
152 /* sleep again if was sleeping */
153 if (sleep)
154 at86rf230_sleep(lp);
155
156 return ret;
157}
158
159static inline int
160__at86rf230_read(struct at86rf230_local *lp,
161 unsigned int addr, unsigned int *data)
162{
163 bool sleep = lp->sleep;
164 int ret;
165
166 /* awake for register setting if sleep */
167 if (sleep)
168 at86rf230_awake(lp);
169
170 ret = regmap_read(lp->regmap, addr, data);
171
172 /* sleep again if was sleeping */
173 if (sleep)
174 at86rf230_sleep(lp);
175
176 return ret;
177}
178
179static inline int
180at86rf230_read_subreg(struct at86rf230_local *lp,
181 unsigned int addr, unsigned int mask,
182 unsigned int shift, unsigned int *data)
183{
184 int rc;
185
186 rc = __at86rf230_read(lp, addr, data);
187 if (!rc)
188 *data = (*data & mask) >> shift;
189
190 return rc;
191}
192
193static inline int
194at86rf230_write_subreg(struct at86rf230_local *lp,
195 unsigned int addr, unsigned int mask,
196 unsigned int shift, unsigned int data)
197{
198 bool sleep = lp->sleep;
199 int ret;
200
201 /* awake for register setting if sleep */
202 if (sleep)
203 at86rf230_awake(lp);
204
205 ret = regmap_update_bits(lp->regmap, addr, mask, data << shift);
206
207 /* sleep again if was sleeping */
208 if (sleep)
209 at86rf230_sleep(lp);
210
211 return ret;
212}
213
214static inline void
215at86rf230_slp_tr_rising_edge(struct at86rf230_local *lp)
216{
217 gpio_set_value(lp->slp_tr, 1);
218 udelay(1);
219 gpio_set_value(lp->slp_tr, 0);
220}
221
222static bool
223at86rf230_reg_writeable(struct device *dev, unsigned int reg)
224{
225 switch (reg) {
226 case RG_TRX_STATE:
227 case RG_TRX_CTRL_0:
228 case RG_TRX_CTRL_1:
229 case RG_PHY_TX_PWR:
230 case RG_PHY_ED_LEVEL:
231 case RG_PHY_CC_CCA:
232 case RG_CCA_THRES:
233 case RG_RX_CTRL:
234 case RG_SFD_VALUE:
235 case RG_TRX_CTRL_2:
236 case RG_ANT_DIV:
237 case RG_IRQ_MASK:
238 case RG_VREG_CTRL:
239 case RG_BATMON:
240 case RG_XOSC_CTRL:
241 case RG_RX_SYN:
242 case RG_XAH_CTRL_1:
243 case RG_FTN_CTRL:
244 case RG_PLL_CF:
245 case RG_PLL_DCU:
246 case RG_SHORT_ADDR_0:
247 case RG_SHORT_ADDR_1:
248 case RG_PAN_ID_0:
249 case RG_PAN_ID_1:
250 case RG_IEEE_ADDR_0:
251 case RG_IEEE_ADDR_1:
252 case RG_IEEE_ADDR_2:
253 case RG_IEEE_ADDR_3:
254 case RG_IEEE_ADDR_4:
255 case RG_IEEE_ADDR_5:
256 case RG_IEEE_ADDR_6:
257 case RG_IEEE_ADDR_7:
258 case RG_XAH_CTRL_0:
259 case RG_CSMA_SEED_0:
260 case RG_CSMA_SEED_1:
261 case RG_CSMA_BE:
262 return true;
263 default:
264 return false;
265 }
266}
267
268static bool
269at86rf230_reg_readable(struct device *dev, unsigned int reg)
270{
271 bool rc;
272
273 /* all writeable are also readable */
274 rc = at86rf230_reg_writeable(dev, reg);
275 if (rc)
276 return rc;
277
278 /* readonly regs */
279 switch (reg) {
280 case RG_TRX_STATUS:
281 case RG_PHY_RSSI:
282 case RG_IRQ_STATUS:
283 case RG_PART_NUM:
284 case RG_VERSION_NUM:
285 case RG_MAN_ID_1:
286 case RG_MAN_ID_0:
287 return true;
288 default:
289 return false;
290 }
291}
292
293static bool
294at86rf230_reg_volatile(struct device *dev, unsigned int reg)
295{
296 /* can be changed during runtime */
297 switch (reg) {
298 case RG_TRX_STATUS:
299 case RG_TRX_STATE:
300 case RG_PHY_RSSI:
301 case RG_PHY_ED_LEVEL:
302 case RG_IRQ_STATUS:
303 case RG_VREG_CTRL:
304 case RG_PLL_CF:
305 case RG_PLL_DCU:
306 return true;
307 default:
308 return false;
309 }
310}
311
312static bool
313at86rf230_reg_precious(struct device *dev, unsigned int reg)
314{
315 /* don't clear irq line on read */
316 switch (reg) {
317 case RG_IRQ_STATUS:
318 return true;
319 default:
320 return false;
321 }
322}
323
324static const struct regmap_config at86rf230_regmap_spi_config = {
325 .reg_bits = 8,
326 .val_bits = 8,
327 .write_flag_mask = CMD_REG | CMD_WRITE,
328 .read_flag_mask = CMD_REG,
329 .cache_type = REGCACHE_RBTREE,
330 .max_register = AT86RF2XX_NUMREGS,
331 .writeable_reg = at86rf230_reg_writeable,
332 .readable_reg = at86rf230_reg_readable,
333 .volatile_reg = at86rf230_reg_volatile,
334 .precious_reg = at86rf230_reg_precious,
335};
336
337static void
338at86rf230_async_error_recover_complete(void *context)
339{
340 struct at86rf230_state_change *ctx = context;
341 struct at86rf230_local *lp = ctx->lp;
342
343 if (ctx->free)
344 kfree(ctx);
345
346 ieee802154_wake_queue(lp->hw);
347}
348
349static void
350at86rf230_async_error_recover(void *context)
351{
352 struct at86rf230_state_change *ctx = context;
353 struct at86rf230_local *lp = ctx->lp;
354
355 lp->is_tx = 0;
356 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
357 at86rf230_async_error_recover_complete);
358}
359
360static inline void
361at86rf230_async_error(struct at86rf230_local *lp,
362 struct at86rf230_state_change *ctx, int rc)
363{
364 dev_err(&lp->spi->dev, "spi_async error %d\n", rc);
365
366 at86rf230_async_state_change(lp, ctx, STATE_FORCE_TRX_OFF,
367 at86rf230_async_error_recover);
368}
369
370/* Generic function to get some register value in async mode */
371static void
372at86rf230_async_read_reg(struct at86rf230_local *lp, u8 reg,
373 struct at86rf230_state_change *ctx,
374 void (*complete)(void *context))
375{
376 int rc;
377
378 u8 *tx_buf = ctx->buf;
379
380 tx_buf[0] = (reg & CMD_REG_MASK) | CMD_REG;
381 ctx->msg.complete = complete;
382 rc = spi_async(lp->spi, &ctx->msg);
383 if (rc)
384 at86rf230_async_error(lp, ctx, rc);
385}
386
387static void
388at86rf230_async_write_reg(struct at86rf230_local *lp, u8 reg, u8 val,
389 struct at86rf230_state_change *ctx,
390 void (*complete)(void *context))
391{
392 int rc;
393
394 ctx->buf[0] = (reg & CMD_REG_MASK) | CMD_REG | CMD_WRITE;
395 ctx->buf[1] = val;
396 ctx->msg.complete = complete;
397 rc = spi_async(lp->spi, &ctx->msg);
398 if (rc)
399 at86rf230_async_error(lp, ctx, rc);
400}
401
402static void
403at86rf230_async_state_assert(void *context)
404{
405 struct at86rf230_state_change *ctx = context;
406 struct at86rf230_local *lp = ctx->lp;
407 const u8 *buf = ctx->buf;
408 const u8 trx_state = buf[1] & TRX_STATE_MASK;
409
410 /* Assert state change */
411 if (trx_state != ctx->to_state) {
412 /* Special handling if transceiver state is in
413 * STATE_BUSY_RX_AACK and a SHR was detected.
414 */
415 if (trx_state == STATE_BUSY_RX_AACK) {
416 /* Undocumented race condition. If we send a state
417 * change to STATE_RX_AACK_ON the transceiver could
418 * change his state automatically to STATE_BUSY_RX_AACK
419 * if a SHR was detected. This is not an error, but we
420 * can't assert this.
421 */
422 if (ctx->to_state == STATE_RX_AACK_ON)
423 goto done;
424
425 /* If we change to STATE_TX_ON without forcing and
426 * transceiver state is STATE_BUSY_RX_AACK, we wait
427 * 'tFrame + tPAck' receiving time. In this time the
428 * PDU should be received. If the transceiver is still
429 * in STATE_BUSY_RX_AACK, we run a force state change
430 * to STATE_TX_ON. This is a timeout handling, if the
431 * transceiver stucks in STATE_BUSY_RX_AACK.
432 *
433 * Additional we do several retries to try to get into
434 * TX_ON state without forcing. If the retries are
435 * higher or equal than AT86RF2XX_MAX_TX_RETRIES we
436 * will do a force change.
437 */
438 if (ctx->to_state == STATE_TX_ON ||
439 ctx->to_state == STATE_TRX_OFF) {
440 u8 state = ctx->to_state;
441
442 if (lp->tx_retry >= AT86RF2XX_MAX_TX_RETRIES)
443 state = STATE_FORCE_TRX_OFF;
444 lp->tx_retry++;
445
446 at86rf230_async_state_change(lp, ctx, state,
447 ctx->complete);
448 return;
449 }
450 }
451
452 dev_warn(&lp->spi->dev, "unexcept state change from 0x%02x to 0x%02x. Actual state: 0x%02x\n",
453 ctx->from_state, ctx->to_state, trx_state);
454 }
455
456done:
457 if (ctx->complete)
458 ctx->complete(context);
459}
460
461static enum hrtimer_restart at86rf230_async_state_timer(struct hrtimer *timer)
462{
463 struct at86rf230_state_change *ctx =
464 container_of(timer, struct at86rf230_state_change, timer);
465 struct at86rf230_local *lp = ctx->lp;
466
467 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
468 at86rf230_async_state_assert);
469
470 return HRTIMER_NORESTART;
471}
472
473/* Do state change timing delay. */
474static void
475at86rf230_async_state_delay(void *context)
476{
477 struct at86rf230_state_change *ctx = context;
478 struct at86rf230_local *lp = ctx->lp;
479 struct at86rf2xx_chip_data *c = lp->data;
480 bool force = false;
481 ktime_t tim;
482
483 /* The force state changes are will show as normal states in the
484 * state status subregister. We change the to_state to the
485 * corresponding one and remember if it was a force change, this
486 * differs if we do a state change from STATE_BUSY_RX_AACK.
487 */
488 switch (ctx->to_state) {
489 case STATE_FORCE_TX_ON:
490 ctx->to_state = STATE_TX_ON;
491 force = true;
492 break;
493 case STATE_FORCE_TRX_OFF:
494 ctx->to_state = STATE_TRX_OFF;
495 force = true;
496 break;
497 default:
498 break;
499 }
500
501 switch (ctx->from_state) {
502 case STATE_TRX_OFF:
503 switch (ctx->to_state) {
504 case STATE_RX_AACK_ON:
505 tim = c->t_off_to_aack * NSEC_PER_USEC;
506 /* state change from TRX_OFF to RX_AACK_ON to do a
507 * calibration, we need to reset the timeout for the
508 * next one.
509 */
510 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
511 goto change;
512 case STATE_TX_ARET_ON:
513 case STATE_TX_ON:
514 tim = c->t_off_to_tx_on * NSEC_PER_USEC;
515 /* state change from TRX_OFF to TX_ON or ARET_ON to do
516 * a calibration, we need to reset the timeout for the
517 * next one.
518 */
519 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
520 goto change;
521 default:
522 break;
523 }
524 break;
525 case STATE_BUSY_RX_AACK:
526 switch (ctx->to_state) {
527 case STATE_TRX_OFF:
528 case STATE_TX_ON:
529 /* Wait for worst case receiving time if we
530 * didn't make a force change from BUSY_RX_AACK
531 * to TX_ON or TRX_OFF.
532 */
533 if (!force) {
534 tim = (c->t_frame + c->t_p_ack) * NSEC_PER_USEC;
535 goto change;
536 }
537 break;
538 default:
539 break;
540 }
541 break;
542 /* Default value, means RESET state */
543 case STATE_P_ON:
544 switch (ctx->to_state) {
545 case STATE_TRX_OFF:
546 tim = c->t_reset_to_off * NSEC_PER_USEC;
547 goto change;
548 default:
549 break;
550 }
551 break;
552 default:
553 break;
554 }
555
556 /* Default delay is 1us in the most cases */
557 udelay(1);
558 at86rf230_async_state_timer(&ctx->timer);
559 return;
560
561change:
562 hrtimer_start(&ctx->timer, tim, HRTIMER_MODE_REL);
563}
564
565static void
566at86rf230_async_state_change_start(void *context)
567{
568 struct at86rf230_state_change *ctx = context;
569 struct at86rf230_local *lp = ctx->lp;
570 u8 *buf = ctx->buf;
571 const u8 trx_state = buf[1] & TRX_STATE_MASK;
572
573 /* Check for "possible" STATE_TRANSITION_IN_PROGRESS */
574 if (trx_state == STATE_TRANSITION_IN_PROGRESS) {
575 udelay(1);
576 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
577 at86rf230_async_state_change_start);
578 return;
579 }
580
581 /* Check if we already are in the state which we change in */
582 if (trx_state == ctx->to_state) {
583 if (ctx->complete)
584 ctx->complete(context);
585 return;
586 }
587
588 /* Set current state to the context of state change */
589 ctx->from_state = trx_state;
590
591 /* Going into the next step for a state change which do a timing
592 * relevant delay.
593 */
594 at86rf230_async_write_reg(lp, RG_TRX_STATE, ctx->to_state, ctx,
595 at86rf230_async_state_delay);
596}
597
598static void
599at86rf230_async_state_change(struct at86rf230_local *lp,
600 struct at86rf230_state_change *ctx,
601 const u8 state, void (*complete)(void *context))
602{
603 /* Initialization for the state change context */
604 ctx->to_state = state;
605 ctx->complete = complete;
606 at86rf230_async_read_reg(lp, RG_TRX_STATUS, ctx,
607 at86rf230_async_state_change_start);
608}
609
610static void
611at86rf230_sync_state_change_complete(void *context)
612{
613 struct at86rf230_state_change *ctx = context;
614 struct at86rf230_local *lp = ctx->lp;
615
616 complete(&lp->state_complete);
617}
618
619/* This function do a sync framework above the async state change.
620 * Some callbacks of the IEEE 802.15.4 driver interface need to be
621 * handled synchronously.
622 */
623static int
624at86rf230_sync_state_change(struct at86rf230_local *lp, unsigned int state)
625{
626 unsigned long rc;
627
628 at86rf230_async_state_change(lp, &lp->state, state,
629 at86rf230_sync_state_change_complete);
630
631 rc = wait_for_completion_timeout(&lp->state_complete,
632 msecs_to_jiffies(100));
633 if (!rc) {
634 at86rf230_async_error(lp, &lp->state, -ETIMEDOUT);
635 return -ETIMEDOUT;
636 }
637
638 return 0;
639}
640
641static void
642at86rf230_tx_complete(void *context)
643{
644 struct at86rf230_state_change *ctx = context;
645 struct at86rf230_local *lp = ctx->lp;
646
647 ieee802154_xmit_complete(lp->hw, lp->tx_skb, false);
648 kfree(ctx);
649}
650
651static void
652at86rf230_tx_on(void *context)
653{
654 struct at86rf230_state_change *ctx = context;
655 struct at86rf230_local *lp = ctx->lp;
656
657 at86rf230_async_state_change(lp, ctx, STATE_RX_AACK_ON,
658 at86rf230_tx_complete);
659}
660
661static void
662at86rf230_tx_trac_check(void *context)
663{
664 struct at86rf230_state_change *ctx = context;
665 struct at86rf230_local *lp = ctx->lp;
666
667 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
668 u8 trac = TRAC_MASK(ctx->buf[1]);
669
670 switch (trac) {
671 case TRAC_SUCCESS:
672 lp->trac.success++;
673 break;
674 case TRAC_SUCCESS_DATA_PENDING:
675 lp->trac.success_data_pending++;
676 break;
677 case TRAC_CHANNEL_ACCESS_FAILURE:
678 lp->trac.channel_access_failure++;
679 break;
680 case TRAC_NO_ACK:
681 lp->trac.no_ack++;
682 break;
683 case TRAC_INVALID:
684 lp->trac.invalid++;
685 break;
686 default:
687 WARN_ONCE(1, "received tx trac status %d\n", trac);
688 break;
689 }
690 }
691
692 at86rf230_async_state_change(lp, ctx, STATE_TX_ON, at86rf230_tx_on);
693}
694
695static void
696at86rf230_rx_read_frame_complete(void *context)
697{
698 struct at86rf230_state_change *ctx = context;
699 struct at86rf230_local *lp = ctx->lp;
700 const u8 *buf = ctx->buf;
701 struct sk_buff *skb;
702 u8 len, lqi;
703
704 len = buf[1];
705 if (!ieee802154_is_valid_psdu_len(len)) {
706 dev_vdbg(&lp->spi->dev, "corrupted frame received\n");
707 len = IEEE802154_MTU;
708 }
709 lqi = buf[2 + len];
710
711 skb = dev_alloc_skb(IEEE802154_MTU);
712 if (!skb) {
713 dev_vdbg(&lp->spi->dev, "failed to allocate sk_buff\n");
714 kfree(ctx);
715 return;
716 }
717
718 skb_put_data(skb, buf + 2, len);
719 ieee802154_rx_irqsafe(lp->hw, skb, lqi);
720 kfree(ctx);
721}
722
723static void
724at86rf230_rx_trac_check(void *context)
725{
726 struct at86rf230_state_change *ctx = context;
727 struct at86rf230_local *lp = ctx->lp;
728 u8 *buf = ctx->buf;
729 int rc;
730
731 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS)) {
732 u8 trac = TRAC_MASK(buf[1]);
733
734 switch (trac) {
735 case TRAC_SUCCESS:
736 lp->trac.success++;
737 break;
738 case TRAC_SUCCESS_WAIT_FOR_ACK:
739 lp->trac.success_wait_for_ack++;
740 break;
741 case TRAC_INVALID:
742 lp->trac.invalid++;
743 break;
744 default:
745 WARN_ONCE(1, "received rx trac status %d\n", trac);
746 break;
747 }
748 }
749
750 buf[0] = CMD_FB;
751 ctx->trx.len = AT86RF2XX_MAX_BUF;
752 ctx->msg.complete = at86rf230_rx_read_frame_complete;
753 rc = spi_async(lp->spi, &ctx->msg);
754 if (rc) {
755 ctx->trx.len = 2;
756 at86rf230_async_error(lp, ctx, rc);
757 }
758}
759
760static void
761at86rf230_irq_trx_end(void *context)
762{
763 struct at86rf230_state_change *ctx = context;
764 struct at86rf230_local *lp = ctx->lp;
765
766 if (lp->is_tx) {
767 lp->is_tx = 0;
768 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
769 at86rf230_tx_trac_check);
770 } else {
771 at86rf230_async_read_reg(lp, RG_TRX_STATE, ctx,
772 at86rf230_rx_trac_check);
773 }
774}
775
776static void
777at86rf230_irq_status(void *context)
778{
779 struct at86rf230_state_change *ctx = context;
780 struct at86rf230_local *lp = ctx->lp;
781 const u8 *buf = ctx->buf;
782 u8 irq = buf[1];
783
784 enable_irq(lp->spi->irq);
785
786 if (irq & IRQ_TRX_END) {
787 at86rf230_irq_trx_end(ctx);
788 } else {
789 dev_err(&lp->spi->dev, "not supported irq %02x received\n",
790 irq);
791 kfree(ctx);
792 }
793}
794
795static void
796at86rf230_setup_spi_messages(struct at86rf230_local *lp,
797 struct at86rf230_state_change *state)
798{
799 state->lp = lp;
800 state->irq = lp->spi->irq;
801 spi_message_init(&state->msg);
802 state->msg.context = state;
803 state->trx.len = 2;
804 state->trx.tx_buf = state->buf;
805 state->trx.rx_buf = state->buf;
806 spi_message_add_tail(&state->trx, &state->msg);
807 hrtimer_init(&state->timer, CLOCK_MONOTONIC, HRTIMER_MODE_REL);
808 state->timer.function = at86rf230_async_state_timer;
809}
810
811static irqreturn_t at86rf230_isr(int irq, void *data)
812{
813 struct at86rf230_local *lp = data;
814 struct at86rf230_state_change *ctx;
815 int rc;
816
817 disable_irq_nosync(irq);
818
819 ctx = kzalloc(sizeof(*ctx), GFP_ATOMIC);
820 if (!ctx) {
821 enable_irq(irq);
822 return IRQ_NONE;
823 }
824
825 at86rf230_setup_spi_messages(lp, ctx);
826 /* tell on error handling to free ctx */
827 ctx->free = true;
828
829 ctx->buf[0] = (RG_IRQ_STATUS & CMD_REG_MASK) | CMD_REG;
830 ctx->msg.complete = at86rf230_irq_status;
831 rc = spi_async(lp->spi, &ctx->msg);
832 if (rc) {
833 at86rf230_async_error(lp, ctx, rc);
834 enable_irq(irq);
835 return IRQ_NONE;
836 }
837
838 return IRQ_HANDLED;
839}
840
841static void
842at86rf230_write_frame_complete(void *context)
843{
844 struct at86rf230_state_change *ctx = context;
845 struct at86rf230_local *lp = ctx->lp;
846
847 ctx->trx.len = 2;
848
849 if (gpio_is_valid(lp->slp_tr))
850 at86rf230_slp_tr_rising_edge(lp);
851 else
852 at86rf230_async_write_reg(lp, RG_TRX_STATE, STATE_BUSY_TX, ctx,
853 NULL);
854}
855
856static void
857at86rf230_write_frame(void *context)
858{
859 struct at86rf230_state_change *ctx = context;
860 struct at86rf230_local *lp = ctx->lp;
861 struct sk_buff *skb = lp->tx_skb;
862 u8 *buf = ctx->buf;
863 int rc;
864
865 lp->is_tx = 1;
866
867 buf[0] = CMD_FB | CMD_WRITE;
868 buf[1] = skb->len + 2;
869 memcpy(buf + 2, skb->data, skb->len);
870 ctx->trx.len = skb->len + 2;
871 ctx->msg.complete = at86rf230_write_frame_complete;
872 rc = spi_async(lp->spi, &ctx->msg);
873 if (rc) {
874 ctx->trx.len = 2;
875 at86rf230_async_error(lp, ctx, rc);
876 }
877}
878
879static void
880at86rf230_xmit_tx_on(void *context)
881{
882 struct at86rf230_state_change *ctx = context;
883 struct at86rf230_local *lp = ctx->lp;
884
885 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
886 at86rf230_write_frame);
887}
888
889static void
890at86rf230_xmit_start(void *context)
891{
892 struct at86rf230_state_change *ctx = context;
893 struct at86rf230_local *lp = ctx->lp;
894
895 /* check if we change from off state */
896 if (lp->is_tx_from_off)
897 at86rf230_async_state_change(lp, ctx, STATE_TX_ARET_ON,
898 at86rf230_write_frame);
899 else
900 at86rf230_async_state_change(lp, ctx, STATE_TX_ON,
901 at86rf230_xmit_tx_on);
902}
903
904static int
905at86rf230_xmit(struct ieee802154_hw *hw, struct sk_buff *skb)
906{
907 struct at86rf230_local *lp = hw->priv;
908 struct at86rf230_state_change *ctx = &lp->tx;
909
910 lp->tx_skb = skb;
911 lp->tx_retry = 0;
912
913 /* After 5 minutes in PLL and the same frequency we run again the
914 * calibration loops which is recommended by at86rf2xx datasheets.
915 *
916 * The calibration is initiate by a state change from TRX_OFF
917 * to TX_ON, the lp->cal_timeout should be reinit by state_delay
918 * function then to start in the next 5 minutes.
919 */
920 if (time_is_before_jiffies(lp->cal_timeout)) {
921 lp->is_tx_from_off = true;
922 at86rf230_async_state_change(lp, ctx, STATE_TRX_OFF,
923 at86rf230_xmit_start);
924 } else {
925 lp->is_tx_from_off = false;
926 at86rf230_xmit_start(ctx);
927 }
928
929 return 0;
930}
931
932static int
933at86rf230_ed(struct ieee802154_hw *hw, u8 *level)
934{
935 WARN_ON(!level);
936 *level = 0xbe;
937 return 0;
938}
939
940static int
941at86rf230_start(struct ieee802154_hw *hw)
942{
943 struct at86rf230_local *lp = hw->priv;
944
945 /* reset trac stats on start */
946 if (IS_ENABLED(CONFIG_IEEE802154_AT86RF230_DEBUGFS))
947 memset(&lp->trac, 0, sizeof(struct at86rf230_trac));
948
949 at86rf230_awake(lp);
950 enable_irq(lp->spi->irq);
951
952 return at86rf230_sync_state_change(lp, STATE_RX_AACK_ON);
953}
954
955static void
956at86rf230_stop(struct ieee802154_hw *hw)
957{
958 struct at86rf230_local *lp = hw->priv;
959 u8 csma_seed[2];
960
961 at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
962
963 disable_irq(lp->spi->irq);
964
965 /* It's recommended to set random new csma_seeds before sleep state.
966 * Makes only sense in the stop callback, not doing this inside of
967 * at86rf230_sleep, this is also used when we don't transmit afterwards
968 * when calling start callback again.
969 */
970 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
971 at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
972 at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
973
974 at86rf230_sleep(lp);
975}
976
977static int
978at86rf23x_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
979{
980 return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
981}
982
983#define AT86RF2XX_MAX_ED_LEVELS 0xF
984static const s32 at86rf233_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
985 -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000, -7800, -7600,
986 -7400, -7200, -7000, -6800, -6600, -6400,
987};
988
989static const s32 at86rf231_ed_levels[AT86RF2XX_MAX_ED_LEVELS + 1] = {
990 -9100, -8900, -8700, -8500, -8300, -8100, -7900, -7700, -7500, -7300,
991 -7100, -6900, -6700, -6500, -6300, -6100,
992};
993
994static const s32 at86rf212_ed_levels_100[AT86RF2XX_MAX_ED_LEVELS + 1] = {
995 -10000, -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200,
996 -8000, -7800, -7600, -7400, -7200, -7000,
997};
998
999static const s32 at86rf212_ed_levels_98[AT86RF2XX_MAX_ED_LEVELS + 1] = {
1000 -9800, -9600, -9400, -9200, -9000, -8800, -8600, -8400, -8200, -8000,
1001 -7800, -7600, -7400, -7200, -7000, -6800,
1002};
1003
1004static inline int
1005at86rf212_update_cca_ed_level(struct at86rf230_local *lp, int rssi_base_val)
1006{
1007 unsigned int cca_ed_thres;
1008 int rc;
1009
1010 rc = at86rf230_read_subreg(lp, SR_CCA_ED_THRES, &cca_ed_thres);
1011 if (rc < 0)
1012 return rc;
1013
1014 switch (rssi_base_val) {
1015 case -98:
1016 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_98;
1017 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_98);
1018 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_98[cca_ed_thres];
1019 break;
1020 case -100:
1021 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
1022 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
1023 lp->hw->phy->cca_ed_level = at86rf212_ed_levels_100[cca_ed_thres];
1024 break;
1025 default:
1026 WARN_ON(1);
1027 }
1028
1029 return 0;
1030}
1031
1032static int
1033at86rf212_set_channel(struct at86rf230_local *lp, u8 page, u8 channel)
1034{
1035 int rc;
1036
1037 if (channel == 0)
1038 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 0);
1039 else
1040 rc = at86rf230_write_subreg(lp, SR_SUB_MODE, 1);
1041 if (rc < 0)
1042 return rc;
1043
1044 if (page == 0) {
1045 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 0);
1046 lp->data->rssi_base_val = -100;
1047 } else {
1048 rc = at86rf230_write_subreg(lp, SR_BPSK_QPSK, 1);
1049 lp->data->rssi_base_val = -98;
1050 }
1051 if (rc < 0)
1052 return rc;
1053
1054 rc = at86rf212_update_cca_ed_level(lp, lp->data->rssi_base_val);
1055 if (rc < 0)
1056 return rc;
1057
1058 /* This sets the symbol_duration according frequency on the 212.
1059 * TODO move this handling while set channel and page in cfg802154.
1060 * We can do that, this timings are according 802.15.4 standard.
1061 * If we do that in cfg802154, this is a more generic calculation.
1062 *
1063 * This should also protected from ifs_timer. Means cancel timer and
1064 * init with a new value. For now, this is okay.
1065 */
1066 if (channel == 0) {
1067 if (page == 0) {
1068 /* SUB:0 and BPSK:0 -> BPSK-20 */
1069 lp->hw->phy->symbol_duration = 50;
1070 } else {
1071 /* SUB:1 and BPSK:0 -> BPSK-40 */
1072 lp->hw->phy->symbol_duration = 25;
1073 }
1074 } else {
1075 if (page == 0)
1076 /* SUB:0 and BPSK:1 -> OQPSK-100/200/400 */
1077 lp->hw->phy->symbol_duration = 40;
1078 else
1079 /* SUB:1 and BPSK:1 -> OQPSK-250/500/1000 */
1080 lp->hw->phy->symbol_duration = 16;
1081 }
1082
1083 lp->hw->phy->lifs_period = IEEE802154_LIFS_PERIOD *
1084 lp->hw->phy->symbol_duration;
1085 lp->hw->phy->sifs_period = IEEE802154_SIFS_PERIOD *
1086 lp->hw->phy->symbol_duration;
1087
1088 return at86rf230_write_subreg(lp, SR_CHANNEL, channel);
1089}
1090
1091static int
1092at86rf230_channel(struct ieee802154_hw *hw, u8 page, u8 channel)
1093{
1094 struct at86rf230_local *lp = hw->priv;
1095 int rc;
1096
1097 rc = lp->data->set_channel(lp, page, channel);
1098 /* Wait for PLL */
1099 usleep_range(lp->data->t_channel_switch,
1100 lp->data->t_channel_switch + 10);
1101
1102 lp->cal_timeout = jiffies + AT86RF2XX_CAL_LOOP_TIMEOUT;
1103 return rc;
1104}
1105
1106static int
1107at86rf230_set_hw_addr_filt(struct ieee802154_hw *hw,
1108 struct ieee802154_hw_addr_filt *filt,
1109 unsigned long changed)
1110{
1111 struct at86rf230_local *lp = hw->priv;
1112
1113 if (changed & IEEE802154_AFILT_SADDR_CHANGED) {
1114 u16 addr = le16_to_cpu(filt->short_addr);
1115
1116 dev_vdbg(&lp->spi->dev, "%s called for saddr\n", __func__);
1117 __at86rf230_write(lp, RG_SHORT_ADDR_0, addr);
1118 __at86rf230_write(lp, RG_SHORT_ADDR_1, addr >> 8);
1119 }
1120
1121 if (changed & IEEE802154_AFILT_PANID_CHANGED) {
1122 u16 pan = le16_to_cpu(filt->pan_id);
1123
1124 dev_vdbg(&lp->spi->dev, "%s called for pan id\n", __func__);
1125 __at86rf230_write(lp, RG_PAN_ID_0, pan);
1126 __at86rf230_write(lp, RG_PAN_ID_1, pan >> 8);
1127 }
1128
1129 if (changed & IEEE802154_AFILT_IEEEADDR_CHANGED) {
1130 u8 i, addr[8];
1131
1132 memcpy(addr, &filt->ieee_addr, 8);
1133 dev_vdbg(&lp->spi->dev, "%s called for IEEE addr\n", __func__);
1134 for (i = 0; i < 8; i++)
1135 __at86rf230_write(lp, RG_IEEE_ADDR_0 + i, addr[i]);
1136 }
1137
1138 if (changed & IEEE802154_AFILT_PANC_CHANGED) {
1139 dev_vdbg(&lp->spi->dev, "%s called for panc change\n", __func__);
1140 if (filt->pan_coord)
1141 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 1);
1142 else
1143 at86rf230_write_subreg(lp, SR_AACK_I_AM_COORD, 0);
1144 }
1145
1146 return 0;
1147}
1148
1149#define AT86RF23X_MAX_TX_POWERS 0xF
1150static const s32 at86rf233_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
1151 400, 370, 340, 300, 250, 200, 100, 0, -100, -200, -300, -400, -600,
1152 -800, -1200, -1700,
1153};
1154
1155static const s32 at86rf231_powers[AT86RF23X_MAX_TX_POWERS + 1] = {
1156 300, 280, 230, 180, 130, 70, 0, -100, -200, -300, -400, -500, -700,
1157 -900, -1200, -1700,
1158};
1159
1160#define AT86RF212_MAX_TX_POWERS 0x1F
1161static const s32 at86rf212_powers[AT86RF212_MAX_TX_POWERS + 1] = {
1162 500, 400, 300, 200, 100, 0, -100, -200, -300, -400, -500, -600, -700,
1163 -800, -900, -1000, -1100, -1200, -1300, -1400, -1500, -1600, -1700,
1164 -1800, -1900, -2000, -2100, -2200, -2300, -2400, -2500, -2600,
1165};
1166
1167static int
1168at86rf23x_set_txpower(struct at86rf230_local *lp, s32 mbm)
1169{
1170 u32 i;
1171
1172 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
1173 if (lp->hw->phy->supported.tx_powers[i] == mbm)
1174 return at86rf230_write_subreg(lp, SR_TX_PWR_23X, i);
1175 }
1176
1177 return -EINVAL;
1178}
1179
1180static int
1181at86rf212_set_txpower(struct at86rf230_local *lp, s32 mbm)
1182{
1183 u32 i;
1184
1185 for (i = 0; i < lp->hw->phy->supported.tx_powers_size; i++) {
1186 if (lp->hw->phy->supported.tx_powers[i] == mbm)
1187 return at86rf230_write_subreg(lp, SR_TX_PWR_212, i);
1188 }
1189
1190 return -EINVAL;
1191}
1192
1193static int
1194at86rf230_set_txpower(struct ieee802154_hw *hw, s32 mbm)
1195{
1196 struct at86rf230_local *lp = hw->priv;
1197
1198 return lp->data->set_txpower(lp, mbm);
1199}
1200
1201static int
1202at86rf230_set_lbt(struct ieee802154_hw *hw, bool on)
1203{
1204 struct at86rf230_local *lp = hw->priv;
1205
1206 return at86rf230_write_subreg(lp, SR_CSMA_LBT_MODE, on);
1207}
1208
1209static int
1210at86rf230_set_cca_mode(struct ieee802154_hw *hw,
1211 const struct wpan_phy_cca *cca)
1212{
1213 struct at86rf230_local *lp = hw->priv;
1214 u8 val;
1215
1216 /* mapping 802.15.4 to driver spec */
1217 switch (cca->mode) {
1218 case NL802154_CCA_ENERGY:
1219 val = 1;
1220 break;
1221 case NL802154_CCA_CARRIER:
1222 val = 2;
1223 break;
1224 case NL802154_CCA_ENERGY_CARRIER:
1225 switch (cca->opt) {
1226 case NL802154_CCA_OPT_ENERGY_CARRIER_AND:
1227 val = 3;
1228 break;
1229 case NL802154_CCA_OPT_ENERGY_CARRIER_OR:
1230 val = 0;
1231 break;
1232 default:
1233 return -EINVAL;
1234 }
1235 break;
1236 default:
1237 return -EINVAL;
1238 }
1239
1240 return at86rf230_write_subreg(lp, SR_CCA_MODE, val);
1241}
1242
1243static int
1244at86rf230_set_cca_ed_level(struct ieee802154_hw *hw, s32 mbm)
1245{
1246 struct at86rf230_local *lp = hw->priv;
1247 u32 i;
1248
1249 for (i = 0; i < hw->phy->supported.cca_ed_levels_size; i++) {
1250 if (hw->phy->supported.cca_ed_levels[i] == mbm)
1251 return at86rf230_write_subreg(lp, SR_CCA_ED_THRES, i);
1252 }
1253
1254 return -EINVAL;
1255}
1256
1257static int
1258at86rf230_set_csma_params(struct ieee802154_hw *hw, u8 min_be, u8 max_be,
1259 u8 retries)
1260{
1261 struct at86rf230_local *lp = hw->priv;
1262 int rc;
1263
1264 rc = at86rf230_write_subreg(lp, SR_MIN_BE, min_be);
1265 if (rc)
1266 return rc;
1267
1268 rc = at86rf230_write_subreg(lp, SR_MAX_BE, max_be);
1269 if (rc)
1270 return rc;
1271
1272 return at86rf230_write_subreg(lp, SR_MAX_CSMA_RETRIES, retries);
1273}
1274
1275static int
1276at86rf230_set_frame_retries(struct ieee802154_hw *hw, s8 retries)
1277{
1278 struct at86rf230_local *lp = hw->priv;
1279
1280 return at86rf230_write_subreg(lp, SR_MAX_FRAME_RETRIES, retries);
1281}
1282
1283static int
1284at86rf230_set_promiscuous_mode(struct ieee802154_hw *hw, const bool on)
1285{
1286 struct at86rf230_local *lp = hw->priv;
1287 int rc;
1288
1289 if (on) {
1290 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 1);
1291 if (rc < 0)
1292 return rc;
1293
1294 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 1);
1295 if (rc < 0)
1296 return rc;
1297 } else {
1298 rc = at86rf230_write_subreg(lp, SR_AACK_PROM_MODE, 0);
1299 if (rc < 0)
1300 return rc;
1301
1302 rc = at86rf230_write_subreg(lp, SR_AACK_DIS_ACK, 0);
1303 if (rc < 0)
1304 return rc;
1305 }
1306
1307 return 0;
1308}
1309
1310static const struct ieee802154_ops at86rf230_ops = {
1311 .owner = THIS_MODULE,
1312 .xmit_async = at86rf230_xmit,
1313 .ed = at86rf230_ed,
1314 .set_channel = at86rf230_channel,
1315 .start = at86rf230_start,
1316 .stop = at86rf230_stop,
1317 .set_hw_addr_filt = at86rf230_set_hw_addr_filt,
1318 .set_txpower = at86rf230_set_txpower,
1319 .set_lbt = at86rf230_set_lbt,
1320 .set_cca_mode = at86rf230_set_cca_mode,
1321 .set_cca_ed_level = at86rf230_set_cca_ed_level,
1322 .set_csma_params = at86rf230_set_csma_params,
1323 .set_frame_retries = at86rf230_set_frame_retries,
1324 .set_promiscuous_mode = at86rf230_set_promiscuous_mode,
1325};
1326
1327static struct at86rf2xx_chip_data at86rf233_data = {
1328 .t_sleep_cycle = 330,
1329 .t_channel_switch = 11,
1330 .t_reset_to_off = 26,
1331 .t_off_to_aack = 80,
1332 .t_off_to_tx_on = 80,
1333 .t_off_to_sleep = 35,
1334 .t_sleep_to_off = 1000,
1335 .t_frame = 4096,
1336 .t_p_ack = 545,
1337 .rssi_base_val = -94,
1338 .set_channel = at86rf23x_set_channel,
1339 .set_txpower = at86rf23x_set_txpower,
1340};
1341
1342static struct at86rf2xx_chip_data at86rf231_data = {
1343 .t_sleep_cycle = 330,
1344 .t_channel_switch = 24,
1345 .t_reset_to_off = 37,
1346 .t_off_to_aack = 110,
1347 .t_off_to_tx_on = 110,
1348 .t_off_to_sleep = 35,
1349 .t_sleep_to_off = 1000,
1350 .t_frame = 4096,
1351 .t_p_ack = 545,
1352 .rssi_base_val = -91,
1353 .set_channel = at86rf23x_set_channel,
1354 .set_txpower = at86rf23x_set_txpower,
1355};
1356
1357static struct at86rf2xx_chip_data at86rf212_data = {
1358 .t_sleep_cycle = 330,
1359 .t_channel_switch = 11,
1360 .t_reset_to_off = 26,
1361 .t_off_to_aack = 200,
1362 .t_off_to_tx_on = 200,
1363 .t_off_to_sleep = 35,
1364 .t_sleep_to_off = 1000,
1365 .t_frame = 4096,
1366 .t_p_ack = 545,
1367 .rssi_base_val = -100,
1368 .set_channel = at86rf212_set_channel,
1369 .set_txpower = at86rf212_set_txpower,
1370};
1371
1372static int at86rf230_hw_init(struct at86rf230_local *lp, u8 xtal_trim)
1373{
1374 int rc, irq_type, irq_pol = IRQ_ACTIVE_HIGH;
1375 unsigned int dvdd;
1376 u8 csma_seed[2];
1377
1378 rc = at86rf230_sync_state_change(lp, STATE_FORCE_TRX_OFF);
1379 if (rc)
1380 return rc;
1381
1382 irq_type = irq_get_trigger_type(lp->spi->irq);
1383 if (irq_type == IRQ_TYPE_EDGE_FALLING ||
1384 irq_type == IRQ_TYPE_LEVEL_LOW)
1385 irq_pol = IRQ_ACTIVE_LOW;
1386
1387 rc = at86rf230_write_subreg(lp, SR_IRQ_POLARITY, irq_pol);
1388 if (rc)
1389 return rc;
1390
1391 rc = at86rf230_write_subreg(lp, SR_RX_SAFE_MODE, 1);
1392 if (rc)
1393 return rc;
1394
1395 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK, IRQ_TRX_END);
1396 if (rc)
1397 return rc;
1398
1399 /* reset values differs in at86rf231 and at86rf233 */
1400 rc = at86rf230_write_subreg(lp, SR_IRQ_MASK_MODE, 0);
1401 if (rc)
1402 return rc;
1403
1404 get_random_bytes(csma_seed, ARRAY_SIZE(csma_seed));
1405 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_0, csma_seed[0]);
1406 if (rc)
1407 return rc;
1408 rc = at86rf230_write_subreg(lp, SR_CSMA_SEED_1, csma_seed[1]);
1409 if (rc)
1410 return rc;
1411
1412 /* CLKM changes are applied immediately */
1413 rc = at86rf230_write_subreg(lp, SR_CLKM_SHA_SEL, 0x00);
1414 if (rc)
1415 return rc;
1416
1417 /* Turn CLKM Off */
1418 rc = at86rf230_write_subreg(lp, SR_CLKM_CTRL, 0x00);
1419 if (rc)
1420 return rc;
1421 /* Wait the next SLEEP cycle */
1422 usleep_range(lp->data->t_sleep_cycle,
1423 lp->data->t_sleep_cycle + 100);
1424
1425 /* xtal_trim value is calculated by:
1426 * CL = 0.5 * (CX + CTRIM + CPAR)
1427 *
1428 * whereas:
1429 * CL = capacitor of used crystal
1430 * CX = connected capacitors at xtal pins
1431 * CPAR = in all at86rf2xx datasheets this is a constant value 3 pF,
1432 * but this is different on each board setup. You need to fine
1433 * tuning this value via CTRIM.
1434 * CTRIM = variable capacitor setting. Resolution is 0.3 pF range is
1435 * 0 pF upto 4.5 pF.
1436 *
1437 * Examples:
1438 * atben transceiver:
1439 *
1440 * CL = 8 pF
1441 * CX = 12 pF
1442 * CPAR = 3 pF (We assume the magic constant from datasheet)
1443 * CTRIM = 0.9 pF
1444 *
1445 * (12+0.9+3)/2 = 7.95 which is nearly at 8 pF
1446 *
1447 * xtal_trim = 0x3
1448 *
1449 * openlabs transceiver:
1450 *
1451 * CL = 16 pF
1452 * CX = 22 pF
1453 * CPAR = 3 pF (We assume the magic constant from datasheet)
1454 * CTRIM = 4.5 pF
1455 *
1456 * (22+4.5+3)/2 = 14.75 which is the nearest value to 16 pF
1457 *
1458 * xtal_trim = 0xf
1459 */
1460 rc = at86rf230_write_subreg(lp, SR_XTAL_TRIM, xtal_trim);
1461 if (rc)
1462 return rc;
1463
1464 rc = at86rf230_read_subreg(lp, SR_DVDD_OK, &dvdd);
1465 if (rc)
1466 return rc;
1467 if (!dvdd) {
1468 dev_err(&lp->spi->dev, "DVDD error\n");
1469 return -EINVAL;
1470 }
1471
1472 /* Force setting slotted operation bit to 0. Sometimes the atben
1473 * sets this bit and I don't know why. We set this always force
1474 * to zero while probing.
1475 */
1476 return at86rf230_write_subreg(lp, SR_SLOTTED_OPERATION, 0);
1477}
1478
1479static int
1480at86rf230_get_pdata(struct spi_device *spi, int *rstn, int *slp_tr,
1481 u8 *xtal_trim)
1482{
1483 struct at86rf230_platform_data *pdata = spi->dev.platform_data;
1484 int ret;
1485
1486 if (!IS_ENABLED(CONFIG_OF) || !spi->dev.of_node) {
1487 if (!pdata)
1488 return -ENOENT;
1489
1490 *rstn = pdata->rstn;
1491 *slp_tr = pdata->slp_tr;
1492 *xtal_trim = pdata->xtal_trim;
1493 return 0;
1494 }
1495
1496 *rstn = of_get_named_gpio(spi->dev.of_node, "reset-gpio", 0);
1497 *slp_tr = of_get_named_gpio(spi->dev.of_node, "sleep-gpio", 0);
1498 ret = of_property_read_u8(spi->dev.of_node, "xtal-trim", xtal_trim);
1499 if (ret < 0 && ret != -EINVAL)
1500 return ret;
1501
1502 return 0;
1503}
1504
1505static int
1506at86rf230_detect_device(struct at86rf230_local *lp)
1507{
1508 unsigned int part, version, val;
1509 u16 man_id = 0;
1510 const char *chip;
1511 int rc;
1512
1513 rc = __at86rf230_read(lp, RG_MAN_ID_0, &val);
1514 if (rc)
1515 return rc;
1516 man_id |= val;
1517
1518 rc = __at86rf230_read(lp, RG_MAN_ID_1, &val);
1519 if (rc)
1520 return rc;
1521 man_id |= (val << 8);
1522
1523 rc = __at86rf230_read(lp, RG_PART_NUM, &part);
1524 if (rc)
1525 return rc;
1526
1527 rc = __at86rf230_read(lp, RG_VERSION_NUM, &version);
1528 if (rc)
1529 return rc;
1530
1531 if (man_id != 0x001f) {
1532 dev_err(&lp->spi->dev, "Non-Atmel dev found (MAN_ID %02x %02x)\n",
1533 man_id >> 8, man_id & 0xFF);
1534 return -EINVAL;
1535 }
1536
1537 lp->hw->flags = IEEE802154_HW_TX_OMIT_CKSUM |
1538 IEEE802154_HW_CSMA_PARAMS |
1539 IEEE802154_HW_FRAME_RETRIES | IEEE802154_HW_AFILT |
1540 IEEE802154_HW_PROMISCUOUS;
1541
1542 lp->hw->phy->flags = WPAN_PHY_FLAG_TXPOWER |
1543 WPAN_PHY_FLAG_CCA_ED_LEVEL |
1544 WPAN_PHY_FLAG_CCA_MODE;
1545
1546 lp->hw->phy->supported.cca_modes = BIT(NL802154_CCA_ENERGY) |
1547 BIT(NL802154_CCA_CARRIER) | BIT(NL802154_CCA_ENERGY_CARRIER);
1548 lp->hw->phy->supported.cca_opts = BIT(NL802154_CCA_OPT_ENERGY_CARRIER_AND) |
1549 BIT(NL802154_CCA_OPT_ENERGY_CARRIER_OR);
1550
1551 lp->hw->phy->cca.mode = NL802154_CCA_ENERGY;
1552
1553 switch (part) {
1554 case 2:
1555 chip = "at86rf230";
1556 rc = -ENOTSUPP;
1557 goto not_supp;
1558 case 3:
1559 chip = "at86rf231";
1560 lp->data = &at86rf231_data;
1561 lp->hw->phy->supported.channels[0] = 0x7FFF800;
1562 lp->hw->phy->current_channel = 11;
1563 lp->hw->phy->symbol_duration = 16;
1564 lp->hw->phy->supported.tx_powers = at86rf231_powers;
1565 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf231_powers);
1566 lp->hw->phy->supported.cca_ed_levels = at86rf231_ed_levels;
1567 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf231_ed_levels);
1568 break;
1569 case 7:
1570 chip = "at86rf212";
1571 lp->data = &at86rf212_data;
1572 lp->hw->flags |= IEEE802154_HW_LBT;
1573 lp->hw->phy->supported.channels[0] = 0x00007FF;
1574 lp->hw->phy->supported.channels[2] = 0x00007FF;
1575 lp->hw->phy->current_channel = 5;
1576 lp->hw->phy->symbol_duration = 25;
1577 lp->hw->phy->supported.lbt = NL802154_SUPPORTED_BOOL_BOTH;
1578 lp->hw->phy->supported.tx_powers = at86rf212_powers;
1579 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf212_powers);
1580 lp->hw->phy->supported.cca_ed_levels = at86rf212_ed_levels_100;
1581 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf212_ed_levels_100);
1582 break;
1583 case 11:
1584 chip = "at86rf233";
1585 lp->data = &at86rf233_data;
1586 lp->hw->phy->supported.channels[0] = 0x7FFF800;
1587 lp->hw->phy->current_channel = 13;
1588 lp->hw->phy->symbol_duration = 16;
1589 lp->hw->phy->supported.tx_powers = at86rf233_powers;
1590 lp->hw->phy->supported.tx_powers_size = ARRAY_SIZE(at86rf233_powers);
1591 lp->hw->phy->supported.cca_ed_levels = at86rf233_ed_levels;
1592 lp->hw->phy->supported.cca_ed_levels_size = ARRAY_SIZE(at86rf233_ed_levels);
1593 break;
1594 default:
1595 chip = "unknown";
1596 rc = -ENOTSUPP;
1597 goto not_supp;
1598 }
1599
1600 lp->hw->phy->cca_ed_level = lp->hw->phy->supported.cca_ed_levels[7];
1601 lp->hw->phy->transmit_power = lp->hw->phy->supported.tx_powers[0];
1602
1603not_supp:
1604 dev_info(&lp->spi->dev, "Detected %s chip version %d\n", chip, version);
1605
1606 return rc;
1607}
1608
1609#ifdef CONFIG_IEEE802154_AT86RF230_DEBUGFS
1610static struct dentry *at86rf230_debugfs_root;
1611
1612static int at86rf230_stats_show(struct seq_file *file, void *offset)
1613{
1614 struct at86rf230_local *lp = file->private;
1615
1616 seq_printf(file, "SUCCESS:\t\t%8llu\n", lp->trac.success);
1617 seq_printf(file, "SUCCESS_DATA_PENDING:\t%8llu\n",
1618 lp->trac.success_data_pending);
1619 seq_printf(file, "SUCCESS_WAIT_FOR_ACK:\t%8llu\n",
1620 lp->trac.success_wait_for_ack);
1621 seq_printf(file, "CHANNEL_ACCESS_FAILURE:\t%8llu\n",
1622 lp->trac.channel_access_failure);
1623 seq_printf(file, "NO_ACK:\t\t\t%8llu\n", lp->trac.no_ack);
1624 seq_printf(file, "INVALID:\t\t%8llu\n", lp->trac.invalid);
1625 return 0;
1626}
1627DEFINE_SHOW_ATTRIBUTE(at86rf230_stats);
1628
1629static void at86rf230_debugfs_init(struct at86rf230_local *lp)
1630{
1631 char debugfs_dir_name[DNAME_INLINE_LEN + 1] = "at86rf230-";
1632
1633 strncat(debugfs_dir_name, dev_name(&lp->spi->dev), DNAME_INLINE_LEN);
1634
1635 at86rf230_debugfs_root = debugfs_create_dir(debugfs_dir_name, NULL);
1636
1637 debugfs_create_file("trac_stats", 0444, at86rf230_debugfs_root, lp,
1638 &at86rf230_stats_fops);
1639}
1640
1641static void at86rf230_debugfs_remove(void)
1642{
1643 debugfs_remove_recursive(at86rf230_debugfs_root);
1644}
1645#else
1646static void at86rf230_debugfs_init(struct at86rf230_local *lp) { }
1647static void at86rf230_debugfs_remove(void) { }
1648#endif
1649
1650static int at86rf230_probe(struct spi_device *spi)
1651{
1652 struct ieee802154_hw *hw;
1653 struct at86rf230_local *lp;
1654 unsigned int status;
1655 int rc, irq_type, rstn, slp_tr;
1656 u8 xtal_trim = 0;
1657
1658 if (!spi->irq) {
1659 dev_err(&spi->dev, "no IRQ specified\n");
1660 return -EINVAL;
1661 }
1662
1663 rc = at86rf230_get_pdata(spi, &rstn, &slp_tr, &xtal_trim);
1664 if (rc < 0) {
1665 dev_err(&spi->dev, "failed to parse platform_data: %d\n", rc);
1666 return rc;
1667 }
1668
1669 if (gpio_is_valid(rstn)) {
1670 rc = devm_gpio_request_one(&spi->dev, rstn,
1671 GPIOF_OUT_INIT_HIGH, "rstn");
1672 if (rc)
1673 return rc;
1674 }
1675
1676 if (gpio_is_valid(slp_tr)) {
1677 rc = devm_gpio_request_one(&spi->dev, slp_tr,
1678 GPIOF_OUT_INIT_LOW, "slp_tr");
1679 if (rc)
1680 return rc;
1681 }
1682
1683 /* Reset */
1684 if (gpio_is_valid(rstn)) {
1685 udelay(1);
1686 gpio_set_value_cansleep(rstn, 0);
1687 udelay(1);
1688 gpio_set_value_cansleep(rstn, 1);
1689 usleep_range(120, 240);
1690 }
1691
1692 hw = ieee802154_alloc_hw(sizeof(*lp), &at86rf230_ops);
1693 if (!hw)
1694 return -ENOMEM;
1695
1696 lp = hw->priv;
1697 lp->hw = hw;
1698 lp->spi = spi;
1699 lp->slp_tr = slp_tr;
1700 hw->parent = &spi->dev;
1701 ieee802154_random_extended_addr(&hw->phy->perm_extended_addr);
1702
1703 lp->regmap = devm_regmap_init_spi(spi, &at86rf230_regmap_spi_config);
1704 if (IS_ERR(lp->regmap)) {
1705 rc = PTR_ERR(lp->regmap);
1706 dev_err(&spi->dev, "Failed to allocate register map: %d\n",
1707 rc);
1708 goto free_dev;
1709 }
1710
1711 at86rf230_setup_spi_messages(lp, &lp->state);
1712 at86rf230_setup_spi_messages(lp, &lp->tx);
1713
1714 rc = at86rf230_detect_device(lp);
1715 if (rc < 0)
1716 goto free_dev;
1717
1718 init_completion(&lp->state_complete);
1719
1720 spi_set_drvdata(spi, lp);
1721
1722 rc = at86rf230_hw_init(lp, xtal_trim);
1723 if (rc)
1724 goto free_dev;
1725
1726 /* Read irq status register to reset irq line */
1727 rc = at86rf230_read_subreg(lp, RG_IRQ_STATUS, 0xff, 0, &status);
1728 if (rc)
1729 goto free_dev;
1730
1731 irq_type = irq_get_trigger_type(spi->irq);
1732 if (!irq_type)
1733 irq_type = IRQF_TRIGGER_HIGH;
1734
1735 rc = devm_request_irq(&spi->dev, spi->irq, at86rf230_isr,
1736 IRQF_SHARED | irq_type, dev_name(&spi->dev), lp);
1737 if (rc)
1738 goto free_dev;
1739
1740 /* disable_irq by default and wait for starting hardware */
1741 disable_irq(spi->irq);
1742
1743 /* going into sleep by default */
1744 at86rf230_sleep(lp);
1745
1746 at86rf230_debugfs_init(lp);
1747
1748 rc = ieee802154_register_hw(lp->hw);
1749 if (rc)
1750 goto free_debugfs;
1751
1752 return rc;
1753
1754free_debugfs:
1755 at86rf230_debugfs_remove();
1756free_dev:
1757 ieee802154_free_hw(lp->hw);
1758
1759 return rc;
1760}
1761
1762static int at86rf230_remove(struct spi_device *spi)
1763{
1764 struct at86rf230_local *lp = spi_get_drvdata(spi);
1765
1766 /* mask all at86rf230 irq's */
1767 at86rf230_write_subreg(lp, SR_IRQ_MASK, 0);
1768 ieee802154_unregister_hw(lp->hw);
1769 ieee802154_free_hw(lp->hw);
1770 at86rf230_debugfs_remove();
1771 dev_dbg(&spi->dev, "unregistered at86rf230\n");
1772
1773 return 0;
1774}
1775
1776static const struct of_device_id at86rf230_of_match[] = {
1777 { .compatible = "atmel,at86rf230", },
1778 { .compatible = "atmel,at86rf231", },
1779 { .compatible = "atmel,at86rf233", },
1780 { .compatible = "atmel,at86rf212", },
1781 { },
1782};
1783MODULE_DEVICE_TABLE(of, at86rf230_of_match);
1784
1785static const struct spi_device_id at86rf230_device_id[] = {
1786 { .name = "at86rf230", },
1787 { .name = "at86rf231", },
1788 { .name = "at86rf233", },
1789 { .name = "at86rf212", },
1790 { },
1791};
1792MODULE_DEVICE_TABLE(spi, at86rf230_device_id);
1793
1794static struct spi_driver at86rf230_driver = {
1795 .id_table = at86rf230_device_id,
1796 .driver = {
1797 .of_match_table = of_match_ptr(at86rf230_of_match),
1798 .name = "at86rf230",
1799 },
1800 .probe = at86rf230_probe,
1801 .remove = at86rf230_remove,
1802};
1803
1804module_spi_driver(at86rf230_driver);
1805
1806MODULE_DESCRIPTION("AT86RF230 Transceiver Driver");
1807MODULE_LICENSE("GPL v2");