Loading...
1/*
2 * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49
50/ {
51 model = "Beelink X2";
52 compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
53
54 aliases {
55 serial0 = &uart0;
56 /* ethernet0 is the H3 emac, defined in sun8i-h3.dtsi */
57 ethernet1 = &sdiowifi;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 connector {
65 compatible = "hdmi-connector";
66 type = "a";
67
68 port {
69 hdmi_con_in: endpoint {
70 remote-endpoint = <&hdmi_out_con>;
71 };
72 };
73 };
74
75 leds {
76 compatible = "gpio-leds";
77
78 blue {
79 label = "beelink-x2:blue:pwr";
80 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
81 default-state = "on";
82 };
83
84 red {
85 label = "beelink-x2:red:standby";
86 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
87 };
88 };
89
90 wifi_pwrseq: wifi_pwrseq {
91 compatible = "mmc-pwrseq-simple";
92 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
93 };
94
95 sound_spdif {
96 compatible = "simple-audio-card";
97 simple-audio-card,name = "On-board SPDIF";
98
99 simple-audio-card,cpu {
100 sound-dai = <&spdif>;
101 };
102
103 simple-audio-card,codec {
104 sound-dai = <&spdif_out>;
105 };
106 };
107
108 spdif_out: spdif-out {
109 #sound-dai-cells = <0>;
110 compatible = "linux,spdif-dit";
111 };
112};
113
114&de {
115 status = "okay";
116};
117
118&ehci0 {
119 status = "okay";
120};
121
122&ehci1 {
123 status = "okay";
124};
125
126&hdmi {
127 status = "okay";
128};
129
130&hdmi_out {
131 hdmi_out_con: endpoint {
132 remote-endpoint = <&hdmi_con_in>;
133 };
134};
135
136&ir {
137 pinctrl-names = "default";
138 pinctrl-0 = <&ir_pins_a>;
139 status = "okay";
140};
141
142&mmc0 {
143 vmmc-supply = <®_vcc3v3>;
144 bus-width = <4>;
145 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
146 status = "okay";
147};
148
149&mmc1 {
150 vmmc-supply = <®_vcc3v3>;
151 bus-width = <4>;
152 non-removable;
153 status = "okay";
154
155 /*
156 * Explicitly define the sdio device, so that we can add an ethernet
157 * alias for it (which e.g. makes u-boot set a mac-address).
158 */
159 sdiowifi: sdio_wifi@1 {
160 reg = <1>;
161 };
162};
163
164&mmc2 {
165 pinctrl-names = "default";
166 pinctrl-0 = <&mmc2_8bit_pins>;
167 vmmc-supply = <®_vcc3v3>;
168 bus-width = <8>;
169 non-removable;
170 cap-mmc-hw-reset;
171 status = "okay";
172};
173
174&ohci0 {
175 status = "okay";
176};
177
178&ohci1 {
179 status = "okay";
180};
181
182®_usb0_vbus {
183 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
184 status = "okay";
185};
186
187&spdif {
188 pinctrl-names = "default";
189 pinctrl-0 = <&spdif_tx_pins_a>;
190 status = "okay";
191};
192
193&uart0 {
194 pinctrl-names = "default";
195 pinctrl-0 = <&uart0_pins_a>;
196 status = "okay";
197};
198
199&usb_otg {
200 dr_mode = "otg";
201 status = "okay";
202};
203
204&usbphy {
205 /* USB VBUS is always on except for the OTG port */
206 status = "okay";
207 usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
208 usb0_vbus-supply = <®_usb0_vbus>;
209};
1/*
2 * Copyright (C) 2017 Marcus Cooper <codekipper@gmail.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun8i-h3.dtsi"
45#include "sunxi-common-regulators.dtsi"
46
47#include <dt-bindings/gpio/gpio.h>
48#include <dt-bindings/input/input.h>
49
50/ {
51 model = "Beelink X2";
52 compatible = "roofull,beelink-x2", "allwinner,sun8i-h3";
53
54 aliases {
55 serial0 = &uart0;
56 ethernet0 = &emac;
57 ethernet1 = &sdiowifi;
58 };
59
60 chosen {
61 stdout-path = "serial0:115200n8";
62 };
63
64 connector {
65 compatible = "hdmi-connector";
66 type = "a";
67
68 port {
69 hdmi_con_in: endpoint {
70 remote-endpoint = <&hdmi_out_con>;
71 };
72 };
73 };
74
75 leds {
76 compatible = "gpio-leds";
77
78 led-0 {
79 label = "beelink-x2:blue:pwr";
80 gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>; /* PL10 */
81 default-state = "on";
82 };
83
84 led-1 {
85 label = "beelink-x2:red:standby";
86 gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>; /* PA15 */
87 };
88 };
89
90 wifi_pwrseq: wifi_pwrseq {
91 compatible = "mmc-pwrseq-simple";
92 reset-gpios = <&r_pio 0 7 GPIO_ACTIVE_LOW>; /* PL7 */
93 clocks = <&rtc 1>;
94 clock-names = "ext_clock";
95 };
96
97 sound_spdif {
98 compatible = "simple-audio-card";
99 simple-audio-card,name = "On-board SPDIF";
100
101 simple-audio-card,cpu {
102 sound-dai = <&spdif>;
103 };
104
105 simple-audio-card,codec {
106 sound-dai = <&spdif_out>;
107 };
108 };
109
110 spdif_out: spdif-out {
111 #sound-dai-cells = <0>;
112 compatible = "linux,spdif-dit";
113 };
114
115 r-gpio-keys {
116 compatible = "gpio-keys";
117
118 power {
119 label = "power";
120 linux,code = <KEY_POWER>;
121 gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
122 wakeup-source;
123 };
124 };
125};
126
127&de {
128 status = "okay";
129};
130
131&ehci0 {
132 status = "okay";
133};
134
135&ehci1 {
136 status = "okay";
137};
138
139&emac {
140 phy-handle = <&int_mii_phy>;
141 phy-mode = "mii";
142 allwinner,leds-active-low;
143 status = "okay";
144};
145
146&hdmi {
147 status = "okay";
148};
149
150&hdmi_out {
151 hdmi_out_con: endpoint {
152 remote-endpoint = <&hdmi_con_in>;
153 };
154};
155
156&ir {
157 linux,rc-map-name = "rc-tanix-tx3mini";
158 pinctrl-names = "default";
159 pinctrl-0 = <&r_ir_rx_pin>;
160 status = "okay";
161};
162
163&mmc0 {
164 vmmc-supply = <®_vcc3v3>;
165 bus-width = <4>;
166 cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
167 status = "okay";
168};
169
170&mmc1 {
171 vmmc-supply = <®_vcc3v3>;
172 vqmmc-supply = <®_vcc3v3>;
173 mmc-pwrseq = <&wifi_pwrseq>;
174 bus-width = <4>;
175 non-removable;
176 status = "okay";
177
178 /*
179 * Explicitly define the sdio device, so that we can add an ethernet
180 * alias for it (which e.g. makes u-boot set a mac-address).
181 */
182 sdiowifi: sdio_wifi@1 {
183 reg = <1>;
184 };
185};
186
187&mmc2 {
188 pinctrl-names = "default";
189 pinctrl-0 = <&mmc2_8bit_pins>;
190 vmmc-supply = <®_vcc3v3>;
191 bus-width = <8>;
192 non-removable;
193 cap-mmc-hw-reset;
194 status = "okay";
195};
196
197&ohci0 {
198 status = "okay";
199};
200
201&ohci1 {
202 status = "okay";
203};
204
205®_usb0_vbus {
206 gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
207 status = "okay";
208};
209
210&spdif {
211 pinctrl-names = "default";
212 pinctrl-0 = <&spdif_tx_pin>;
213 status = "okay";
214};
215
216&uart0 {
217 pinctrl-names = "default";
218 pinctrl-0 = <&uart0_pa_pins>;
219 status = "okay";
220};
221
222&usb_otg {
223 dr_mode = "otg";
224 status = "okay";
225};
226
227&usbphy {
228 /* USB VBUS is always on except for the OTG port */
229 status = "okay";
230 usb0_id_det-gpios = <&pio 0 7 GPIO_ACTIVE_HIGH>; /* PA07 */
231 usb0_vbus-supply = <®_usb0_vbus>;
232};