Loading...
1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/interrupt-controller/arm-gic.h>
48
49/ {
50 model = "LeMaker Banana Pro";
51 compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
52
53 aliases {
54 serial0 = &uart0;
55 serial1 = &uart4;
56 serial2 = &uart7;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
62
63 leds {
64 compatible = "gpio-leds";
65 pinctrl-names = "default";
66 pinctrl-0 = <&led_pins_bananapro>;
67
68 blue {
69 label = "bananapro:blue:usr";
70 gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
71 };
72
73 green {
74 label = "bananapro:green:usr";
75 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
76 };
77 };
78
79 wifi_pwrseq: wifi-pwrseq {
80 compatible = "mmc-pwrseq-simple";
81 pinctrl-names = "default";
82 pinctrl-0 = <&vmmc3_pin_bananapro>;
83 reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
84 };
85
86 reg_gmac_3v3: gmac-3v3 {
87 compatible = "regulator-fixed";
88 pinctrl-names = "default";
89 pinctrl-0 = <&gmac_power_pin_bananapro>;
90 regulator-name = "gmac-3v3";
91 regulator-min-microvolt = <3300000>;
92 regulator-max-microvolt = <3300000>;
93 startup-delay-us = <100000>;
94 enable-active-high;
95 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
96 };
97};
98
99&ahci {
100 status = "okay";
101};
102
103&codec {
104 status = "okay";
105};
106
107&ehci0 {
108 status = "okay";
109};
110
111&ehci1 {
112 status = "okay";
113};
114
115&gmac {
116 pinctrl-names = "default";
117 pinctrl-0 = <&gmac_pins_rgmii_a>;
118 phy = <&phy1>;
119 phy-mode = "rgmii";
120 phy-supply = <®_gmac_3v3>;
121 status = "okay";
122
123 phy1: ethernet-phy@1 {
124 reg = <1>;
125 };
126};
127
128&i2c0 {
129 pinctrl-names = "default";
130 pinctrl-0 = <&i2c0_pins_a>;
131 status = "okay";
132
133 axp209: pmic@34 {
134 compatible = "x-powers,axp209";
135 reg = <0x34>;
136 interrupt-parent = <&nmi_intc>;
137 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
138
139 interrupt-controller;
140 #interrupt-cells = <1>;
141 };
142};
143
144&i2c2 {
145 pinctrl-names = "default";
146 pinctrl-0 = <&i2c2_pins_a>;
147 status = "okay";
148};
149
150&ir0 {
151 pinctrl-names = "default";
152 pinctrl-0 = <&ir0_rx_pins_a>;
153 status = "okay";
154};
155
156&mmc0 {
157 pinctrl-names = "default";
158 pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin_bananapro>;
159 vmmc-supply = <®_vcc3v3>;
160 bus-width = <4>;
161 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
162 status = "okay";
163};
164
165&mmc3 {
166 pinctrl-names = "default";
167 pinctrl-0 = <&mmc3_pins_a>;
168 vmmc-supply = <®_vcc3v3>;
169 mmc-pwrseq = <&wifi_pwrseq>;
170 bus-width = <4>;
171 non-removable;
172 status = "okay";
173
174 brcmf: wifi@1 {
175 reg = <1>;
176 compatible = "brcm,bcm4329-fmac";
177 interrupt-parent = <&pio>;
178 interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
179 interrupt-names = "host-wake";
180 };
181};
182
183&ohci0 {
184 status = "okay";
185};
186
187&ohci1 {
188 status = "okay";
189};
190
191&pio {
192 gmac_power_pin_bananapro: gmac_power_pin@0 {
193 pins = "PH23";
194 function = "gpio_out";
195 };
196
197 led_pins_bananapro: led_pins@0 {
198 pins = "PH24", "PG2";
199 function = "gpio_out";
200 };
201
202 mmc0_cd_pin_bananapro: mmc0_cd_pin@0 {
203 pins = "PH10";
204 function = "gpio_in";
205 bias-pull-up;
206 };
207
208 usb1_vbus_pin_bananapro: usb1_vbus_pin@0 {
209 pins = "PH0";
210 function = "gpio_out";
211 };
212
213 usb2_vbus_pin_bananapro: usb2_vbus_pin@0 {
214 pins = "PH1";
215 function = "gpio_out";
216 };
217
218 vmmc3_pin_bananapro: vmmc3_pin@0 {
219 pins = "PH22";
220 function = "gpio_out";
221 };
222};
223
224®_usb1_vbus {
225 pinctrl-0 = <&usb1_vbus_pin_bananapro>;
226 gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
227 status = "okay";
228};
229
230®_usb2_vbus {
231 pinctrl-0 = <&usb2_vbus_pin_bananapro>;
232 gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
233 status = "okay";
234};
235
236&spi0 {
237 pinctrl-names = "default";
238 pinctrl-0 = <&spi0_pins_a>,
239 <&spi0_cs0_pins_a>,
240 <&spi0_cs1_pins_a>;
241 status = "okay";
242};
243
244&uart0 {
245 pinctrl-names = "default";
246 pinctrl-0 = <&uart0_pins_a>;
247 status = "okay";
248};
249
250&uart4 {
251 pinctrl-names = "default";
252 pinctrl-0 = <&uart4_pins_b>;
253 status = "okay";
254};
255
256&uart7 {
257 pinctrl-names = "default";
258 pinctrl-0 = <&uart7_pins_a>;
259 status = "okay";
260};
261
262&usbphy {
263 usb1_vbus-supply = <®_usb1_vbus>;
264 usb2_vbus-supply = <®_usb2_vbus>;
265 status = "okay";
266};
1/*
2 * Copyright 2015 Hans de Goede <hdegoede@redhat.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is free software; you can redistribute it and/or
10 * modify it under the terms of the GNU General Public License as
11 * published by the Free Software Foundation; either version 2 of the
12 * License, or (at your option) any later version.
13 *
14 * This file is distributed in the hope that it will be useful,
15 * but WITHOUT ANY WARRANTY; without even the implied warranty of
16 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
17 * GNU General Public License for more details.
18 *
19 * Or, alternatively,
20 *
21 * b) Permission is hereby granted, free of charge, to any person
22 * obtaining a copy of this software and associated documentation
23 * files (the "Software"), to deal in the Software without
24 * restriction, including without limitation the rights to use,
25 * copy, modify, merge, publish, distribute, sublicense, and/or
26 * sell copies of the Software, and to permit persons to whom the
27 * Software is furnished to do so, subject to the following
28 * conditions:
29 *
30 * The above copyright notice and this permission notice shall be
31 * included in all copies or substantial portions of the Software.
32 *
33 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
34 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
35 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
36 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
37 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
38 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
39 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
40 * OTHER DEALINGS IN THE SOFTWARE.
41 */
42
43/dts-v1/;
44#include "sun7i-a20.dtsi"
45#include "sunxi-common-regulators.dtsi"
46#include <dt-bindings/gpio/gpio.h>
47#include <dt-bindings/interrupt-controller/arm-gic.h>
48
49/ {
50 model = "LeMaker Banana Pro";
51 compatible = "lemaker,bananapro", "allwinner,sun7i-a20";
52
53 aliases {
54 serial0 = &uart0;
55 serial1 = &uart4;
56 serial2 = &uart7;
57 };
58
59 chosen {
60 stdout-path = "serial0:115200n8";
61 };
62
63 leds {
64 compatible = "gpio-leds";
65
66 led-0 {
67 label = "bananapro:blue:usr";
68 gpios = <&pio 6 2 GPIO_ACTIVE_HIGH>;
69 };
70
71 led-1 {
72 label = "bananapro:green:usr";
73 gpios = <&pio 7 24 GPIO_ACTIVE_HIGH>;
74 };
75 };
76
77 wifi_pwrseq: wifi-pwrseq {
78 compatible = "mmc-pwrseq-simple";
79 reset-gpios = <&pio 7 22 GPIO_ACTIVE_LOW>;
80 };
81
82 reg_gmac_3v3: gmac-3v3 {
83 compatible = "regulator-fixed";
84 regulator-name = "gmac-3v3";
85 regulator-min-microvolt = <3300000>;
86 regulator-max-microvolt = <3300000>;
87 startup-delay-us = <100000>;
88 enable-active-high;
89 gpio = <&pio 7 23 GPIO_ACTIVE_HIGH>;
90 };
91};
92
93&ahci {
94 status = "okay";
95};
96
97&codec {
98 status = "okay";
99};
100
101&ehci0 {
102 status = "okay";
103};
104
105&ehci1 {
106 status = "okay";
107};
108
109&gmac {
110 pinctrl-names = "default";
111 pinctrl-0 = <&gmac_rgmii_pins>;
112 phy-handle = <&phy1>;
113 phy-mode = "rgmii-id";
114 phy-supply = <®_gmac_3v3>;
115 status = "okay";
116};
117
118&i2c0 {
119 status = "okay";
120
121 axp209: pmic@34 {
122 compatible = "x-powers,axp209";
123 reg = <0x34>;
124 interrupt-parent = <&nmi_intc>;
125 interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
126
127 interrupt-controller;
128 #interrupt-cells = <1>;
129 };
130};
131
132&i2c2 {
133 status = "okay";
134};
135
136&ir0 {
137 pinctrl-names = "default";
138 pinctrl-0 = <&ir0_rx_pin>;
139 status = "okay";
140};
141
142&gmac_mdio {
143 phy1: ethernet-phy@1 {
144 reg = <1>;
145 };
146};
147
148&mmc0 {
149 vmmc-supply = <®_vcc3v3>;
150 bus-width = <4>;
151 cd-gpios = <&pio 7 10 GPIO_ACTIVE_LOW>; /* PH10 */
152 status = "okay";
153};
154
155&mmc3 {
156 vmmc-supply = <®_vcc3v3>;
157 mmc-pwrseq = <&wifi_pwrseq>;
158 bus-width = <4>;
159 non-removable;
160 status = "okay";
161
162 brcmf: wifi@1 {
163 reg = <1>;
164 compatible = "brcm,bcm4329-fmac";
165 interrupt-parent = <&pio>;
166 interrupts = <7 15 IRQ_TYPE_LEVEL_LOW>;
167 interrupt-names = "host-wake";
168 };
169};
170
171&ohci0 {
172 status = "okay";
173};
174
175&ohci1 {
176 status = "okay";
177};
178
179®_usb1_vbus {
180 gpio = <&pio 7 0 GPIO_ACTIVE_HIGH>; /* PH0 */
181 status = "okay";
182};
183
184®_usb2_vbus {
185 gpio = <&pio 7 1 GPIO_ACTIVE_HIGH>; /* PH1 */
186 status = "okay";
187};
188
189&spi0 {
190 pinctrl-names = "default";
191 pinctrl-0 = <&spi0_pi_pins>,
192 <&spi0_cs0_pi_pin>,
193 <&spi0_cs1_pi_pin>;
194 status = "okay";
195};
196
197&uart0 {
198 pinctrl-names = "default";
199 pinctrl-0 = <&uart0_pb_pins>;
200 status = "okay";
201};
202
203&uart4 {
204 pinctrl-names = "default";
205 pinctrl-0 = <&uart4_ph_pins>;
206 status = "okay";
207};
208
209&uart7 {
210 pinctrl-names = "default";
211 pinctrl-0 = <&uart7_pi_pins>;
212 status = "okay";
213};
214
215&usbphy {
216 usb1_vbus-supply = <®_usb1_vbus>;
217 usb2_vbus-supply = <®_usb2_vbus>;
218 status = "okay";
219};