Loading...
1/*
2 * DTS file for SPEAr1310 Evaluation Baord
3 *
4 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
5 *
6 * The code contained herein is licensed under the GNU General Public
7 * License. You may obtain a copy of the GNU General Public License
8 * Version 2 or later at the following locations:
9 *
10 * http://www.opensource.org/licenses/gpl-license.html
11 * http://www.gnu.org/copyleft/gpl.html
12 */
13
14/dts-v1/;
15/include/ "spear1310.dtsi"
16
17/ {
18 model = "ST SPEAr1310 Evaluation Board";
19 compatible = "st,spear1310-evb", "st,spear1310";
20 #address-cells = <1>;
21 #size-cells = <1>;
22
23 memory {
24 reg = <0 0x40000000>;
25 };
26
27 ahb {
28 pinmux@e0700000 {
29 pinctrl-names = "default";
30 pinctrl-0 = <&state_default>;
31
32 state_default: pinmux {
33 i2c0 {
34 st,pins = "i2c0_grp";
35 st,function = "i2c0";
36 };
37 i2s0 {
38 st,pins = "i2s0_grp";
39 st,function = "i2s0";
40 };
41 i2s1 {
42 st,pins = "i2s1_grp";
43 st,function = "i2s1";
44 };
45 gpio {
46 st,pins = "arm_gpio_grp";
47 st,function = "arm_gpio";
48 };
49 clcd {
50 st,pins = "clcd_grp" , "clcd_high_res";
51 st,function = "clcd";
52 };
53 eth {
54 st,pins = "gmii_grp";
55 st,function = "gmii";
56 };
57 ssp0 {
58 st,pins = "ssp0_grp";
59 st,function = "ssp0";
60 };
61 kbd {
62 st,pins = "keyboard_6x6_grp";
63 st,function = "keyboard";
64 };
65 sdhci {
66 st,pins = "sdhci_grp";
67 st,function = "sdhci";
68 };
69 smi-pmx {
70 st,pins = "smi_2_chips_grp";
71 st,function = "smi";
72 };
73 uart0 {
74 st,pins = "uart0_grp";
75 st,function = "uart0";
76 };
77 rs485 {
78 st,pins = "rs485_0_1_tdm_0_1_grp";
79 st,function = "rs485_0_1_tdm_0_1";
80 };
81 i2c1_2 {
82 st,pins = "i2c_1_2_grp";
83 st,function = "i2c_1_2";
84 };
85 smii {
86 st,pins = "smii_0_1_2_grp";
87 st,function = "smii_0_1_2";
88 };
89 nand {
90 st,pins = "nand_8bit_grp",
91 "nand_16bit_grp";
92 st,function = "nand";
93 };
94 sata {
95 st,pins = "sata0_grp";
96 st,function = "sata";
97 };
98 pcie {
99 st,pins = "pcie1_grp", "pcie2_grp";
100 st,function = "pci_express";
101 };
102 };
103 };
104
105 ahci@b1000000 {
106 status = "okay";
107 };
108
109 miphy@eb800000 {
110 status = "okay";
111 };
112
113 cf@b2800000 {
114 status = "okay";
115 };
116
117 dma@ea800000 {
118 status = "okay";
119 };
120
121 dma@eb000000 {
122 status = "okay";
123 };
124
125 fsmc: flash@b0000000 {
126 status = "okay";
127
128 partition@0 {
129 label = "xloader";
130 reg = <0x0 0x80000>;
131 };
132 partition@80000 {
133 label = "u-boot";
134 reg = <0x80000 0x140000>;
135 };
136 partition@1C0000 {
137 label = "environment";
138 reg = <0x1C0000 0x40000>;
139 };
140 partition@200000 {
141 label = "dtb";
142 reg = <0x200000 0x40000>;
143 };
144 partition@240000 {
145 label = "linux";
146 reg = <0x240000 0xC00000>;
147 };
148 partition@E40000 {
149 label = "rootfs";
150 reg = <0xE40000 0x0>;
151 };
152 };
153
154 gpio_keys {
155 compatible = "gpio-keys";
156 #address-cells = <1>;
157 #size-cells = <0>;
158
159 button@1 {
160 label = "wakeup";
161 linux,code = <0x100>;
162 gpios = <&gpio0 7 0x4>;
163 debounce-interval = <20>;
164 wakeup-source;
165 };
166 };
167
168 gmac0: eth@e2000000 {
169 phy-mode = "gmii";
170 status = "okay";
171 };
172
173 sdhci@b3000000 {
174 status = "okay";
175 };
176
177 smi: flash@ea000000 {
178 status = "okay";
179 clock-rate=<50000000>;
180
181 flash@e6000000 {
182 #address-cells = <1>;
183 #size-cells = <1>;
184 reg = <0xe6000000 0x800000>;
185 st,smi-fast-mode;
186
187 partition@0 {
188 label = "xloader";
189 reg = <0x0 0x10000>;
190 };
191 partition@10000 {
192 label = "u-boot";
193 reg = <0x10000 0x50000>;
194 };
195 partition@60000 {
196 label = "environment";
197 reg = <0x60000 0x10000>;
198 };
199 partition@70000 {
200 label = "dtb";
201 reg = <0x70000 0x10000>;
202 };
203 partition@80000 {
204 label = "linux";
205 reg = <0x80000 0x310000>;
206 };
207 partition@390000 {
208 label = "rootfs";
209 reg = <0x390000 0x0>;
210 };
211 };
212 };
213
214 ehci@e4800000 {
215 status = "okay";
216 };
217
218 ehci@e5800000 {
219 status = "okay";
220 };
221
222 ohci@e4000000 {
223 status = "okay";
224 };
225
226 ohci@e5000000 {
227 status = "okay";
228 };
229
230 apb {
231 adc@e0080000 {
232 status = "okay";
233 };
234
235 gpio0: gpio@e0600000 {
236 status = "okay";
237 };
238
239 gpio1: gpio@e0680000 {
240 status = "okay";
241 };
242
243 gpio@d8400000 {
244 status = "okay";
245 };
246
247 i2c0: i2c@e0280000 {
248 status = "okay";
249 };
250
251 kbd@e0300000 {
252 linux,keymap = < 0x00000001
253 0x00010002
254 0x00020003
255 0x00030004
256 0x00040005
257 0x00050006
258 0x00060007
259 0x00070008
260 0x00080009
261 0x0100000a
262 0x0101000c
263 0x0102000d
264 0x0103000e
265 0x0104000f
266 0x01050010
267 0x01060011
268 0x01070012
269 0x01080013
270 0x02000014
271 0x02010015
272 0x02020016
273 0x02030017
274 0x02040018
275 0x02050019
276 0x0206001a
277 0x0207001b
278 0x0208001c
279 0x0300001d
280 0x0301001e
281 0x0302001f
282 0x03030020
283 0x03040021
284 0x03050022
285 0x03060023
286 0x03070024
287 0x03080025
288 0x04000026
289 0x04010027
290 0x04020028
291 0x04030029
292 0x0404002a
293 0x0405002b
294 0x0406002c
295 0x0407002d
296 0x0408002e
297 0x0500002f
298 0x05010030
299 0x05020031
300 0x05030032
301 0x05040033
302 0x05050034
303 0x05060035
304 0x05070036
305 0x05080037
306 0x06000038
307 0x06010039
308 0x0602003a
309 0x0603003b
310 0x0604003c
311 0x0605003d
312 0x0606003e
313 0x0607003f
314 0x06080040
315 0x07000041
316 0x07010042
317 0x07020043
318 0x07030044
319 0x07040045
320 0x07050046
321 0x07060047
322 0x07070048
323 0x07080049
324 0x0800004a
325 0x0801004b
326 0x0802004c
327 0x0803004d
328 0x0804004e
329 0x0805004f
330 0x08060050
331 0x08070051
332 0x08080052 >;
333 autorepeat;
334 st,mode = <0>;
335 suspended_rate = <2000000>;
336 status = "okay";
337 };
338
339 rtc@e0580000 {
340 status = "okay";
341 };
342
343 serial@e0000000 {
344 status = "okay";
345 pinctrl-names = "default";
346 pinctrl-0 = <>;
347 };
348
349 spi0: spi@e0100000 {
350 status = "okay";
351 num-cs = <3>;
352 cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
353
354 stmpe610@0 {
355 compatible = "st,stmpe610";
356 reg = <0>;
357 #address-cells = <1>;
358 #size-cells = <0>;
359 spi-max-frequency = <1000000>;
360 spi-cpha;
361 pl022,hierarchy = <0>;
362 pl022,interface = <0>;
363 pl022,slave-tx-disable;
364 pl022,com-mode = <0>;
365 pl022,rx-level-trig = <0>;
366 pl022,tx-level-trig = <0>;
367 pl022,ctrl-len = <0x7>;
368 pl022,wait-state = <0>;
369 pl022,duplex = <0>;
370 interrupts = <6 0x4>;
371 interrupt-parent = <&gpio1>;
372 irq-trigger = <0x2>;
373
374 stmpe_touchscreen {
375 compatible = "st,stmpe-ts";
376 ts,sample-time = <4>;
377 ts,mod-12b = <1>;
378 ts,ref-sel = <0>;
379 ts,adc-freq = <1>;
380 ts,ave-ctrl = <1>;
381 ts,touch-det-delay = <2>;
382 ts,settling = <2>;
383 ts,fraction-z = <7>;
384 ts,i-drive = <1>;
385 };
386 };
387
388 m25p80@1 {
389 compatible = "st,m25p80";
390 reg = <1>;
391 spi-max-frequency = <12000000>;
392 spi-cpol;
393 spi-cpha;
394 pl022,hierarchy = <0>;
395 pl022,interface = <0>;
396 pl022,slave-tx-disable;
397 pl022,com-mode = <0x2>;
398 pl022,rx-level-trig = <0>;
399 pl022,tx-level-trig = <0>;
400 pl022,ctrl-len = <0x11>;
401 pl022,wait-state = <0>;
402 pl022,duplex = <0>;
403 };
404
405 spidev@2 {
406 compatible = "spidev";
407 reg = <2>;
408 spi-max-frequency = <25000000>;
409 spi-cpha;
410 pl022,hierarchy = <0>;
411 pl022,interface = <0>;
412 pl022,slave-tx-disable;
413 pl022,com-mode = <0x2>;
414 pl022,rx-level-trig = <0>;
415 pl022,tx-level-trig = <0>;
416 pl022,ctrl-len = <0x11>;
417 pl022,wait-state = <0>;
418 pl022,duplex = <0>;
419 };
420 };
421
422 wdt@ec800620 {
423 status = "okay";
424 };
425 };
426 };
427};
1// SPDX-License-Identifier: GPL-2.0-or-later
2/*
3 * DTS file for SPEAr1310 Evaluation Baord
4 *
5 * Copyright 2012 Viresh Kumar <vireshk@kernel.org>
6 */
7
8/dts-v1/;
9/include/ "spear1310.dtsi"
10
11/ {
12 model = "ST SPEAr1310 Evaluation Board";
13 compatible = "st,spear1310-evb", "st,spear1310";
14 #address-cells = <1>;
15 #size-cells = <1>;
16
17 memory {
18 reg = <0 0x40000000>;
19 };
20
21 ahb {
22 pinmux@e0700000 {
23 pinctrl-names = "default";
24 pinctrl-0 = <&state_default>;
25
26 state_default: pinmux {
27 i2c0 {
28 st,pins = "i2c0_grp";
29 st,function = "i2c0";
30 };
31 i2s0 {
32 st,pins = "i2s0_grp";
33 st,function = "i2s0";
34 };
35 i2s1 {
36 st,pins = "i2s1_grp";
37 st,function = "i2s1";
38 };
39 gpio {
40 st,pins = "arm_gpio_grp";
41 st,function = "arm_gpio";
42 };
43 clcd {
44 st,pins = "clcd_grp" , "clcd_high_res";
45 st,function = "clcd";
46 };
47 eth {
48 st,pins = "gmii_grp";
49 st,function = "gmii";
50 };
51 ssp0 {
52 st,pins = "ssp0_grp";
53 st,function = "ssp0";
54 };
55 kbd {
56 st,pins = "keyboard_6x6_grp";
57 st,function = "keyboard";
58 };
59 sdhci {
60 st,pins = "sdhci_grp";
61 st,function = "sdhci";
62 };
63 smi-pmx {
64 st,pins = "smi_2_chips_grp";
65 st,function = "smi";
66 };
67 uart0 {
68 st,pins = "uart0_grp";
69 st,function = "uart0";
70 };
71 rs485 {
72 st,pins = "rs485_0_1_tdm_0_1_grp";
73 st,function = "rs485_0_1_tdm_0_1";
74 };
75 i2c1_2 {
76 st,pins = "i2c_1_2_grp";
77 st,function = "i2c_1_2";
78 };
79 smii {
80 st,pins = "smii_0_1_2_grp";
81 st,function = "smii_0_1_2";
82 };
83 nand {
84 st,pins = "nand_8bit_grp",
85 "nand_16bit_grp";
86 st,function = "nand";
87 };
88 sata {
89 st,pins = "sata0_grp";
90 st,function = "sata";
91 };
92 pcie {
93 st,pins = "pcie1_grp", "pcie2_grp";
94 st,function = "pci_express";
95 };
96 };
97 };
98
99 ahci@b1000000 {
100 status = "okay";
101 };
102
103 miphy@eb800000 {
104 status = "okay";
105 };
106
107 cf@b2800000 {
108 status = "okay";
109 };
110
111 dma@ea800000 {
112 status = "okay";
113 };
114
115 dma@eb000000 {
116 status = "okay";
117 };
118
119 fsmc: flash@b0000000 {
120 status = "okay";
121
122 partition@0 {
123 label = "xloader";
124 reg = <0x0 0x80000>;
125 };
126 partition@80000 {
127 label = "u-boot";
128 reg = <0x80000 0x140000>;
129 };
130 partition@1C0000 {
131 label = "environment";
132 reg = <0x1C0000 0x40000>;
133 };
134 partition@200000 {
135 label = "dtb";
136 reg = <0x200000 0x40000>;
137 };
138 partition@240000 {
139 label = "linux";
140 reg = <0x240000 0xC00000>;
141 };
142 partition@E40000 {
143 label = "rootfs";
144 reg = <0xE40000 0x0>;
145 };
146 };
147
148 gpio_keys {
149 compatible = "gpio-keys";
150 #address-cells = <1>;
151 #size-cells = <0>;
152
153 button@1 {
154 label = "wakeup";
155 linux,code = <0x100>;
156 gpios = <&gpio0 7 0x4>;
157 debounce-interval = <20>;
158 wakeup-source;
159 };
160 };
161
162 gmac0: eth@e2000000 {
163 phy-mode = "gmii";
164 status = "okay";
165 };
166
167 sdhci@b3000000 {
168 status = "okay";
169 };
170
171 smi: flash@ea000000 {
172 status = "okay";
173 clock-rate=<50000000>;
174
175 flash@e6000000 {
176 #address-cells = <1>;
177 #size-cells = <1>;
178 reg = <0xe6000000 0x800000>;
179 st,smi-fast-mode;
180
181 partition@0 {
182 label = "xloader";
183 reg = <0x0 0x10000>;
184 };
185 partition@10000 {
186 label = "u-boot";
187 reg = <0x10000 0x50000>;
188 };
189 partition@60000 {
190 label = "environment";
191 reg = <0x60000 0x10000>;
192 };
193 partition@70000 {
194 label = "dtb";
195 reg = <0x70000 0x10000>;
196 };
197 partition@80000 {
198 label = "linux";
199 reg = <0x80000 0x310000>;
200 };
201 partition@390000 {
202 label = "rootfs";
203 reg = <0x390000 0x0>;
204 };
205 };
206 };
207
208 ehci@e4800000 {
209 status = "okay";
210 };
211
212 ehci@e5800000 {
213 status = "okay";
214 };
215
216 ohci@e4000000 {
217 status = "okay";
218 };
219
220 ohci@e5000000 {
221 status = "okay";
222 };
223
224 apb {
225 adc@e0080000 {
226 status = "okay";
227 };
228
229 gpio0: gpio@e0600000 {
230 status = "okay";
231 };
232
233 gpio1: gpio@e0680000 {
234 status = "okay";
235 };
236
237 gpio@d8400000 {
238 status = "okay";
239 };
240
241 i2c0: i2c@e0280000 {
242 status = "okay";
243 };
244
245 kbd@e0300000 {
246 linux,keymap = < 0x00000001
247 0x00010002
248 0x00020003
249 0x00030004
250 0x00040005
251 0x00050006
252 0x00060007
253 0x00070008
254 0x00080009
255 0x0100000a
256 0x0101000c
257 0x0102000d
258 0x0103000e
259 0x0104000f
260 0x01050010
261 0x01060011
262 0x01070012
263 0x01080013
264 0x02000014
265 0x02010015
266 0x02020016
267 0x02030017
268 0x02040018
269 0x02050019
270 0x0206001a
271 0x0207001b
272 0x0208001c
273 0x0300001d
274 0x0301001e
275 0x0302001f
276 0x03030020
277 0x03040021
278 0x03050022
279 0x03060023
280 0x03070024
281 0x03080025
282 0x04000026
283 0x04010027
284 0x04020028
285 0x04030029
286 0x0404002a
287 0x0405002b
288 0x0406002c
289 0x0407002d
290 0x0408002e
291 0x0500002f
292 0x05010030
293 0x05020031
294 0x05030032
295 0x05040033
296 0x05050034
297 0x05060035
298 0x05070036
299 0x05080037
300 0x06000038
301 0x06010039
302 0x0602003a
303 0x0603003b
304 0x0604003c
305 0x0605003d
306 0x0606003e
307 0x0607003f
308 0x06080040
309 0x07000041
310 0x07010042
311 0x07020043
312 0x07030044
313 0x07040045
314 0x07050046
315 0x07060047
316 0x07070048
317 0x07080049
318 0x0800004a
319 0x0801004b
320 0x0802004c
321 0x0803004d
322 0x0804004e
323 0x0805004f
324 0x08060050
325 0x08070051
326 0x08080052 >;
327 autorepeat;
328 st,mode = <0>;
329 suspended_rate = <2000000>;
330 status = "okay";
331 };
332
333 rtc@e0580000 {
334 status = "okay";
335 };
336
337 serial@e0000000 {
338 status = "okay";
339 pinctrl-names = "default";
340 pinctrl-0 = <>;
341 };
342
343 spi0: spi@e0100000 {
344 status = "okay";
345 num-cs = <3>;
346 cs-gpios = <&gpio1 7 0>, <&spics 0 0>, <&spics 1 0>;
347
348 stmpe610@0 {
349 compatible = "st,stmpe610";
350 reg = <0>;
351 #address-cells = <1>;
352 #size-cells = <0>;
353 spi-max-frequency = <1000000>;
354 spi-cpha;
355 pl022,hierarchy = <0>;
356 pl022,interface = <0>;
357 pl022,slave-tx-disable;
358 pl022,com-mode = <0>;
359 pl022,rx-level-trig = <0>;
360 pl022,tx-level-trig = <0>;
361 pl022,ctrl-len = <0x7>;
362 pl022,wait-state = <0>;
363 pl022,duplex = <0>;
364 interrupts = <6 0x4>;
365 interrupt-parent = <&gpio1>;
366 irq-trigger = <0x2>;
367
368 stmpe_touchscreen {
369 compatible = "st,stmpe-ts";
370 ts,sample-time = <4>;
371 ts,mod-12b = <1>;
372 ts,ref-sel = <0>;
373 ts,adc-freq = <1>;
374 ts,ave-ctrl = <1>;
375 ts,touch-det-delay = <2>;
376 ts,settling = <2>;
377 ts,fraction-z = <7>;
378 ts,i-drive = <1>;
379 };
380 };
381
382 m25p80@1 {
383 compatible = "st,m25p80";
384 reg = <1>;
385 spi-max-frequency = <12000000>;
386 spi-cpol;
387 spi-cpha;
388 pl022,hierarchy = <0>;
389 pl022,interface = <0>;
390 pl022,slave-tx-disable;
391 pl022,com-mode = <0x2>;
392 pl022,rx-level-trig = <0>;
393 pl022,tx-level-trig = <0>;
394 pl022,ctrl-len = <0x11>;
395 pl022,wait-state = <0>;
396 pl022,duplex = <0>;
397 };
398
399 spidev@2 {
400 compatible = "spidev";
401 reg = <2>;
402 spi-max-frequency = <25000000>;
403 spi-cpha;
404 pl022,hierarchy = <0>;
405 pl022,interface = <0>;
406 pl022,slave-tx-disable;
407 pl022,com-mode = <0x2>;
408 pl022,rx-level-trig = <0>;
409 pl022,tx-level-trig = <0>;
410 pl022,ctrl-len = <0x11>;
411 pl022,wait-state = <0>;
412 pl022,duplex = <0>;
413 };
414 };
415
416 wdt@ec800620 {
417 status = "okay";
418 };
419 };
420 };
421};