1/*
 2 * Copyright (C) 2017 Luxul Inc.
 3 *
 4 * Licensed under the ISC license.
 5 */
 6
 7/dts-v1/;
 8
 9#include "bcm4708.dtsi"
10#include "bcm5301x-nand-cs0-bch8.dtsi"
11
12/ {
13	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
14	model = "Luxul ABR-4500 V1";
15
16	chosen {
17		bootargs = "earlycon";
18	};
19
20	memory {
21		reg = <0x00000000 0x08000000
22		       0x88000000 0x18000000>;
 
 
 
 
 
 
23	};
24
25	leds {
26		compatible = "gpio-leds";
27
28		status {
29			label = "bcm53xx:green:status";
30			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
31			linux,default-trigger = "timer";
32		};
33
34		usb3 {
35			label = "bcm53xx:green:usb3";
36			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
37			trigger-sources = <&ohci_port1>, <&ehci_port1>,
38				<&xhci_port1>;
39			linux,default-trigger = "usbport";
40		};
41
42	};
43
44	gpio-keys {
45		compatible = "gpio-keys";
46		#address-cells = <1>;
47		#size-cells = <0>;
48
49		restart {
50			label = "Reset";
51			linux,code = <KEY_RESTART>;
52			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
53		};
54	};
55};
56
57&usb3 {
58	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
59};
60
61&spi_nor {
 
 
 
 
62	status = "okay";
63};

 1// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
 2/*
 3 * Copyright (C) 2017 Luxul Inc.
 
 
 4 */
 5
 6/dts-v1/;
 7
 8#include "bcm4708.dtsi"
 9#include "bcm5301x-nand-cs0-bch8.dtsi"
10
11/ {
12	compatible = "luxul,abr-4500-v1", "brcm,bcm47094", "brcm,bcm4708";
13	model = "Luxul ABR-4500 V1";
14
15	chosen {
16		bootargs = "earlycon";
17	};
18
19	memory@0 {
20		device_type = "memory";
21		reg = <0x00000000 0x08000000>,
22		      <0x88000000 0x18000000>;
23	};
24
25	nvram@1eff0000 {
26		compatible = "brcm,nvram";
27		reg = <0x1eff0000 0x10000>;
28	};
29
30	leds {
31		compatible = "gpio-leds";
32
33		status {
34			label = "bcm53xx:green:status";
35			gpios = <&chipcommon 20 GPIO_ACTIVE_LOW>;
36			linux,default-trigger = "timer";
37		};
38
39		usb3 {
40			label = "bcm53xx:green:usb3";
41			gpios = <&chipcommon 19 GPIO_ACTIVE_LOW>;
42			trigger-sources = <&ohci_port1>, <&ehci_port1>,
43				<&xhci_port1>;
44			linux,default-trigger = "usbport";
45		};
46
47	};
48
49	gpio-keys {
50		compatible = "gpio-keys";
 
 
51
52		restart {
53			label = "Reset";
54			linux,code = <KEY_RESTART>;
55			gpios = <&chipcommon 17 GPIO_ACTIVE_LOW>;
56		};
57	};
58};
59
60&usb3 {
61	vcc-gpio = <&chipcommon 18 GPIO_ACTIVE_HIGH>;
62};
63
64&spi_nor {
65	status = "okay";
66};
67
68&usb3_phy {
69	status = "okay";
70};