Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2017 Texas Instruments Incorporated - http://www.ti.com/
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/interrupt-controller/irq.h>
8#include "am57xx-idk-common.dtsi"
9
10/ {
11 memory@0 {
12 device_type = "memory";
13 reg = <0x0 0x80000000 0x0 0x80000000>;
14 };
15
16 status-leds {
17 compatible = "gpio-leds";
18 cpu0-led {
19 label = "status0:red:cpu0";
20 gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
21 default-state = "off";
22 linux,default-trigger = "cpu0";
23 };
24
25 usr0-led {
26 label = "status0:green:usr";
27 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
28 default-state = "off";
29 };
30
31 heartbeat-led {
32 label = "status0:blue:heartbeat";
33 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
34 default-state = "off";
35 linux,default-trigger = "heartbeat";
36 };
37
38 cpu1-led {
39 label = "status1:red:cpu1";
40 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
41 default-state = "off";
42 linux,default-trigger = "cpu1";
43 };
44
45 usr1-led {
46 label = "status1:green:usr";
47 gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
48 default-state = "off";
49 };
50
51 mmc0-led {
52 label = "status1:blue:mmc0";
53 gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
54 default-state = "off";
55 linux,default-trigger = "mmc0";
56 };
57 };
58};
59
60&omap_dwc3_2 {
61 extcon = <&extcon_usb2>;
62};
63
64&extcon_usb2 {
65 id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
66 vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
67};
68
69&sn65hvs882 {
70 load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
71};
72
73&pcie1_rc {
74 status = "okay";
75 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
76};
77
78&pcie1_ep {
79 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
80};
81
82&mailbox5 {
83 status = "okay";
84 mbox_ipu1_ipc3x: mbox_ipu1_ipc3x {
85 status = "okay";
86 };
87 mbox_dsp1_ipc3x: mbox_dsp1_ipc3x {
88 status = "okay";
89 };
90};
91
92&mailbox6 {
93 status = "okay";
94 mbox_ipu2_ipc3x: mbox_ipu2_ipc3x {
95 status = "okay";
96 };
97 mbox_dsp2_ipc3x: mbox_dsp2_ipc3x {
98 status = "okay";
99 };
100};
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Copyright (C) 2017 Texas Instruments Incorporated - https://www.ti.com/
4 */
5
6#include <dt-bindings/gpio/gpio.h>
7#include <dt-bindings/interrupt-controller/irq.h>
8#include "am57xx-idk-common.dtsi"
9#include "dra74-ipu-dsp-common.dtsi"
10
11/ {
12 memory@0 {
13 device_type = "memory";
14 reg = <0x0 0x80000000 0x0 0x80000000>;
15 };
16
17 reserved-memory {
18 #address-cells = <2>;
19 #size-cells = <2>;
20 ranges;
21
22 ipu2_memory_region: ipu2-memory@95800000 {
23 compatible = "shared-dma-pool";
24 reg = <0x0 0x95800000 0x0 0x3800000>;
25 reusable;
26 status = "okay";
27 };
28
29 dsp1_memory_region: dsp1-memory@99000000 {
30 compatible = "shared-dma-pool";
31 reg = <0x0 0x99000000 0x0 0x4000000>;
32 reusable;
33 status = "okay";
34 };
35
36 ipu1_memory_region: ipu1-memory@9d000000 {
37 compatible = "shared-dma-pool";
38 reg = <0x0 0x9d000000 0x0 0x2000000>;
39 reusable;
40 status = "okay";
41 };
42
43 dsp2_memory_region: dsp2-memory@9f000000 {
44 compatible = "shared-dma-pool";
45 reg = <0x0 0x9f000000 0x0 0x800000>;
46 reusable;
47 status = "okay";
48 };
49 };
50
51 status-leds {
52 compatible = "gpio-leds";
53 cpu0-led {
54 label = "status0:red:cpu0";
55 gpios = <&gpio4 0 GPIO_ACTIVE_HIGH>;
56 default-state = "off";
57 linux,default-trigger = "cpu0";
58 };
59
60 usr0-led {
61 label = "status0:green:usr";
62 gpios = <&gpio3 11 GPIO_ACTIVE_HIGH>;
63 default-state = "off";
64 };
65
66 heartbeat-led {
67 label = "status0:blue:heartbeat";
68 gpios = <&gpio3 12 GPIO_ACTIVE_HIGH>;
69 default-state = "off";
70 linux,default-trigger = "heartbeat";
71 };
72
73 cpu1-led {
74 label = "status1:red:cpu1";
75 gpios = <&gpio3 10 GPIO_ACTIVE_HIGH>;
76 default-state = "off";
77 linux,default-trigger = "cpu1";
78 };
79
80 usr1-led {
81 label = "status1:green:usr";
82 gpios = <&gpio7 23 GPIO_ACTIVE_HIGH>;
83 default-state = "off";
84 };
85
86 mmc0-led {
87 label = "status1:blue:mmc0";
88 gpios = <&gpio7 22 GPIO_ACTIVE_HIGH>;
89 default-state = "off";
90 linux,default-trigger = "mmc0";
91 };
92 };
93
94 idk-leds {
95 status = "disabled";
96 compatible = "gpio-leds";
97 red0-led {
98 label = "idk:red0";
99 gpios = <&gpio6 19 GPIO_ACTIVE_HIGH>;
100 default-state = "off";
101 };
102
103 green0-led {
104 label = "idk:green0";
105 gpios = <&gpio3 9 GPIO_ACTIVE_HIGH>;
106 default-state = "off";
107 };
108
109 blue0-led {
110 label = "idk:blue0";
111 gpios = <&gpio1 4 GPIO_ACTIVE_HIGH>;
112 default-state = "off";
113 };
114
115 red1-led {
116 label = "idk:red1";
117 gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
118 default-state = "off";
119 };
120
121 green1-led {
122 label = "idk:green1";
123 gpios = <&gpio2 29 GPIO_ACTIVE_HIGH>;
124 default-state = "off";
125 };
126
127 blue1-led {
128 label = "idk:blue1";
129 gpios = <&gpio1 5 GPIO_ACTIVE_HIGH>;
130 default-state = "off";
131 };
132
133 red2-led {
134 label = "idk:red2";
135 gpios = <&gpio7 9 GPIO_ACTIVE_HIGH>;
136 default-state = "off";
137 };
138
139 green2-led {
140 label = "idk:green2";
141 gpios = <&gpio7 8 GPIO_ACTIVE_HIGH>;
142 default-state = "off";
143 };
144
145 blue2-led {
146 label = "idk:blue2";
147 gpios = <&gpio7 10 GPIO_ACTIVE_HIGH>;
148 default-state = "off";
149 };
150
151 red3-led {
152 label = "idk:red3";
153 gpios = <&gpio7 11 GPIO_ACTIVE_HIGH>;
154 default-state = "off";
155 };
156
157 green3-led {
158 label = "idk:green3";
159 gpios = <&gpio3 17 GPIO_ACTIVE_HIGH>;
160 default-state = "off";
161 };
162
163 blue3-led {
164 label = "idk:blue3";
165 gpios = <&gpio3 18 GPIO_ACTIVE_HIGH>;
166 default-state = "off";
167 };
168 };
169};
170
171&extcon_usb2 {
172 id-gpio = <&gpio3 16 GPIO_ACTIVE_HIGH>;
173 vbus-gpio = <&gpio3 26 GPIO_ACTIVE_HIGH>;
174};
175
176&sn65hvs882 {
177 load-gpios = <&gpio3 19 GPIO_ACTIVE_LOW>;
178};
179
180&pcie1_rc {
181 status = "okay";
182 gpios = <&gpio3 23 GPIO_ACTIVE_HIGH>;
183};
184
185&ipu2 {
186 status = "okay";
187 memory-region = <&ipu2_memory_region>;
188};
189
190&ipu1 {
191 status = "okay";
192 memory-region = <&ipu1_memory_region>;
193};
194
195&dsp1 {
196 status = "okay";
197 memory-region = <&dsp1_memory_region>;
198};
199
200&dsp2 {
201 status = "okay";
202 memory-region = <&dsp2_memory_region>;
203};