Loading...
1#
2# Intel network device configuration
3#
4
5config NET_VENDOR_INTEL
6 bool "Intel devices"
7 default y
8 ---help---
9 If you have a network (Ethernet) card belonging to this class, say Y.
10
11 Note that the answer to this question doesn't directly affect the
12 kernel: saying N will just cause the configurator to skip all
13 the questions about Intel cards. If you say Y, you will be asked for
14 your specific card in the following questions.
15
16if NET_VENDOR_INTEL
17
18config E100
19 tristate "Intel(R) PRO/100+ support"
20 depends on PCI
21 select MII
22 ---help---
23 This driver supports Intel(R) PRO/100 family of adapters.
24 To verify that your adapter is supported, find the board ID number
25 on the adapter. Look for a label that has a barcode and a number
26 in the format 123456-001 (six digits hyphen three digits).
27
28 Use the above information and the Adapter & Driver ID Guide that
29 can be located at:
30
31 <http://support.intel.com>
32
33 to identify the adapter.
34
35 More specific information on configuring the driver is in
36 <file:Documentation/networking/e100.txt>.
37
38 To compile this driver as a module, choose M here. The module
39 will be called e100.
40
41config E1000
42 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
43 depends on PCI
44 ---help---
45 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
46 adapters. For more information on how to identify your adapter, go
47 to the Adapter & Driver ID Guide that can be located at:
48
49 <http://support.intel.com>
50
51 More specific information on configuring the driver is in
52 <file:Documentation/networking/e1000.txt>.
53
54 To compile this driver as a module, choose M here. The module
55 will be called e1000.
56
57config E1000E
58 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
59 depends on PCI && (!SPARC32 || BROKEN)
60 select CRC32
61 imply PTP_1588_CLOCK
62 ---help---
63 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
64 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
65 use the regular e1000 driver For more information on how to
66 identify your adapter, go to the Adapter & Driver ID Guide that
67 can be located at:
68
69 <http://support.intel.com>
70
71 To compile this driver as a module, choose M here. The module
72 will be called e1000e.
73
74config E1000E_HWTS
75 bool "Support HW cross-timestamp on PCH devices"
76 default y
77 depends on E1000E && X86
78 ---help---
79 Say Y to enable hardware supported cross-timestamping on PCH
80 devices. The cross-timestamp is available through the PTP clock
81 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
82
83config IGB
84 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
85 depends on PCI
86 imply PTP_1588_CLOCK
87 select I2C
88 select I2C_ALGOBIT
89 ---help---
90 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
91 adapters. For more information on how to identify your adapter, go
92 to the Adapter & Driver ID Guide that can be located at:
93
94 <http://support.intel.com>
95
96 More specific information on configuring the driver is in
97 <file:Documentation/networking/e1000.txt>.
98
99 To compile this driver as a module, choose M here. The module
100 will be called igb.
101
102config IGB_HWMON
103 bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
104 default y
105 depends on IGB && HWMON && !(IGB=y && HWMON=m)
106 ---help---
107 Say Y if you want to expose thermal sensor data on Intel devices.
108
109 Some of our devices contain thermal sensors, both external and internal.
110 This data is available via the hwmon sysfs interface and exposes
111 the onboard sensors.
112
113config IGB_DCA
114 bool "Direct Cache Access (DCA) Support"
115 default y
116 depends on IGB && DCA && !(IGB=y && DCA=m)
117 ---help---
118 Say Y here if you want to use Direct Cache Access (DCA) in the
119 driver. DCA is a method for warming the CPU cache before data
120 is used, with the intent of lessening the impact of cache misses.
121
122config IGBVF
123 tristate "Intel(R) 82576 Virtual Function Ethernet support"
124 depends on PCI
125 ---help---
126 This driver supports Intel(R) 82576 virtual functions. For more
127 information on how to identify your adapter, go to the Adapter &
128 Driver ID Guide that can be located at:
129
130 <http://support.intel.com>
131
132 More specific information on configuring the driver is in
133 <file:Documentation/networking/e1000.txt>.
134
135 To compile this driver as a module, choose M here. The module
136 will be called igbvf.
137
138config IXGB
139 tristate "Intel(R) PRO/10GbE support"
140 depends on PCI
141 ---help---
142 This driver supports Intel(R) PRO/10GbE family of adapters for
143 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
144 instead. For more information on how to identify your adapter, go
145 to the Adapter & Driver ID Guide that can be located at:
146
147 <http://support.intel.com>
148
149 More specific information on configuring the driver is in
150 <file:Documentation/networking/ixgb.txt>.
151
152 To compile this driver as a module, choose M here. The module
153 will be called ixgb.
154
155config IXGBE
156 tristate "Intel(R) 10GbE PCI Express adapters support"
157 depends on PCI
158 select MDIO
159 imply PTP_1588_CLOCK
160 ---help---
161 This driver supports Intel(R) 10GbE PCI Express family of
162 adapters. For more information on how to identify your adapter, go
163 to the Adapter & Driver ID Guide that can be located at:
164
165 <http://support.intel.com>
166
167 To compile this driver as a module, choose M here. The module
168 will be called ixgbe.
169
170config IXGBE_HWMON
171 bool "Intel(R) 10GbE PCI Express adapters HWMON support"
172 default y
173 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
174 ---help---
175 Say Y if you want to expose the thermal sensor data on some of
176 our cards, via a hwmon sysfs interface.
177
178config IXGBE_DCA
179 bool "Direct Cache Access (DCA) Support"
180 default y
181 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
182 ---help---
183 Say Y here if you want to use Direct Cache Access (DCA) in the
184 driver. DCA is a method for warming the CPU cache before data
185 is used, with the intent of lessening the impact of cache misses.
186
187config IXGBE_DCB
188 bool "Data Center Bridging (DCB) Support"
189 default n
190 depends on IXGBE && DCB
191 ---help---
192 Say Y here if you want to use Data Center Bridging (DCB) in the
193 driver.
194
195 If unsure, say N.
196
197config IXGBEVF
198 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
199 depends on PCI_MSI
200 ---help---
201 This driver supports Intel(R) PCI Express virtual functions for the
202 Intel(R) ixgbe driver. For more information on how to identify your
203 adapter, go to the Adapter & Driver ID Guide that can be located at:
204
205 <http://support.intel.com>
206
207 More specific information on configuring the driver is in
208 <file:Documentation/networking/ixgbevf.txt>.
209
210 To compile this driver as a module, choose M here. The module
211 will be called ixgbevf. MSI-X interrupt support is required
212 for this driver to work correctly.
213
214config I40E
215 tristate "Intel(R) Ethernet Controller XL710 Family support"
216 imply PTP_1588_CLOCK
217 depends on PCI
218 ---help---
219 This driver supports Intel(R) Ethernet Controller XL710 Family of
220 devices. For more information on how to identify your adapter, go
221 to the Adapter & Driver ID Guide that can be located at:
222
223 <http://support.intel.com>
224
225 To compile this driver as a module, choose M here. The module
226 will be called i40e.
227
228config I40E_DCB
229 bool "Data Center Bridging (DCB) Support"
230 default n
231 depends on I40E && DCB
232 ---help---
233 Say Y here if you want to use Data Center Bridging (DCB) in the
234 driver.
235
236 If unsure, say N.
237
238config I40EVF
239 tristate "Intel(R) Ethernet Adaptive Virtual Function support"
240 depends on PCI_MSI
241 ---help---
242 This driver supports virtual functions for Intel XL710,
243 X710, X722, and all devices advertising support for Intel
244 Ethernet Adaptive Virtual Function devices. For more
245 information on how to identify your adapter, go to the Adapter
246 & Driver ID Guide that can be located at:
247
248 <http://support.intel.com>
249
250 To compile this driver as a module, choose M here. The module
251 will be called i40evf. MSI-X interrupt support is required
252 for this driver to work correctly.
253
254config ICE
255 tristate "Intel(R) Ethernet Connection E800 Series Support"
256 default n
257 depends on PCI_MSI
258 ---help---
259 This driver supports Intel(R) Ethernet Connection E800 Series of
260 devices. For more information on how to identify your adapter, go
261 to the Adapter & Driver ID Guide that can be located at:
262
263 <http://support.intel.com>
264
265 To compile this driver as a module, choose M here. The module
266 will be called ice.
267
268config FM10K
269 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
270 default n
271 depends on PCI_MSI
272 imply PTP_1588_CLOCK
273 ---help---
274 This driver supports Intel(R) FM10000 Ethernet Switch Host
275 Interface. For more information on how to identify your adapter,
276 go to the Adapter & Driver ID Guide that can be located at:
277
278 <http://support.intel.com>
279
280 To compile this driver as a module, choose M here. The module
281 will be called fm10k. MSI-X interrupt support is required
282
283endif # NET_VENDOR_INTEL
1# SPDX-License-Identifier: GPL-2.0-only
2#
3# Intel network device configuration
4#
5
6config NET_VENDOR_INTEL
7 bool "Intel devices"
8 default y
9 help
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about Intel cards. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_INTEL
18
19config E100
20 tristate "Intel(R) PRO/100+ support"
21 depends on PCI
22 select MII
23 help
24 This driver supports Intel(R) PRO/100 family of adapters.
25 To verify that your adapter is supported, find the board ID number
26 on the adapter. Look for a label that has a barcode and a number
27 in the format 123456-001 (six digits hyphen three digits).
28
29 Use the above information and the Adapter & Driver ID Guide that
30 can be located at:
31
32 <http://support.intel.com>
33
34 to identify the adapter.
35
36 More specific information on configuring the driver is in
37 <file:Documentation/networking/device_drivers/ethernet/intel/e100.rst>.
38
39 To compile this driver as a module, choose M here. The module
40 will be called e100.
41
42config E1000
43 tristate "Intel(R) PRO/1000 Gigabit Ethernet support"
44 depends on PCI
45 help
46 This driver supports Intel(R) PRO/1000 gigabit ethernet family of
47 adapters. For more information on how to identify your adapter, go
48 to the Adapter & Driver ID Guide that can be located at:
49
50 <http://support.intel.com>
51
52 More specific information on configuring the driver is in
53 <file:Documentation/networking/device_drivers/ethernet/intel/e1000.rst>.
54
55 To compile this driver as a module, choose M here. The module
56 will be called e1000.
57
58config E1000E
59 tristate "Intel(R) PRO/1000 PCI-Express Gigabit Ethernet support"
60 depends on PCI && (!SPARC32 || BROKEN)
61 select CRC32
62 imply PTP_1588_CLOCK
63 help
64 This driver supports the PCI-Express Intel(R) PRO/1000 gigabit
65 ethernet family of adapters. For PCI or PCI-X e1000 adapters,
66 use the regular e1000 driver For more information on how to
67 identify your adapter, go to the Adapter & Driver ID Guide that
68 can be located at:
69
70 <http://support.intel.com>
71
72 More specific information on configuring the driver is in
73 <file:Documentation/networking/device_drivers/ethernet/intel/e1000e.rst>.
74
75 To compile this driver as a module, choose M here. The module
76 will be called e1000e.
77
78config E1000E_HWTS
79 bool "Support HW cross-timestamp on PCH devices"
80 default y
81 depends on E1000E && X86
82 help
83 Say Y to enable hardware supported cross-timestamping on PCH
84 devices. The cross-timestamp is available through the PTP clock
85 driver precise cross-timestamp ioctl (PTP_SYS_OFFSET_PRECISE).
86
87config IGB
88 tristate "Intel(R) 82575/82576 PCI-Express Gigabit Ethernet support"
89 depends on PCI
90 imply PTP_1588_CLOCK
91 select I2C
92 select I2C_ALGOBIT
93 help
94 This driver supports Intel(R) 82575/82576 gigabit ethernet family of
95 adapters. For more information on how to identify your adapter, go
96 to the Adapter & Driver ID Guide that can be located at:
97
98 <http://support.intel.com>
99
100 More specific information on configuring the driver is in
101 <file:Documentation/networking/device_drivers/ethernet/intel/igb.rst>.
102
103 To compile this driver as a module, choose M here. The module
104 will be called igb.
105
106config IGB_HWMON
107 bool "Intel(R) PCI-Express Gigabit adapters HWMON support"
108 default y
109 depends on IGB && HWMON && !(IGB=y && HWMON=m)
110 help
111 Say Y if you want to expose thermal sensor data on Intel devices.
112
113 Some of our devices contain thermal sensors, both external and internal.
114 This data is available via the hwmon sysfs interface and exposes
115 the onboard sensors.
116
117config IGB_DCA
118 bool "Direct Cache Access (DCA) Support"
119 default y
120 depends on IGB && DCA && !(IGB=y && DCA=m)
121 help
122 Say Y here if you want to use Direct Cache Access (DCA) in the
123 driver. DCA is a method for warming the CPU cache before data
124 is used, with the intent of lessening the impact of cache misses.
125
126config IGBVF
127 tristate "Intel(R) 82576 Virtual Function Ethernet support"
128 depends on PCI
129 help
130 This driver supports Intel(R) 82576 virtual functions. For more
131 information on how to identify your adapter, go to the Adapter &
132 Driver ID Guide that can be located at:
133
134 <http://support.intel.com>
135
136 More specific information on configuring the driver is in
137 <file:Documentation/networking/device_drivers/ethernet/intel/igbvf.rst>.
138
139 To compile this driver as a module, choose M here. The module
140 will be called igbvf.
141
142config IXGB
143 tristate "Intel(R) PRO/10GbE support"
144 depends on PCI
145 help
146 This driver supports Intel(R) PRO/10GbE family of adapters for
147 PCI-X type cards. For PCI-E type cards, use the "ixgbe" driver
148 instead. For more information on how to identify your adapter, go
149 to the Adapter & Driver ID Guide that can be located at:
150
151 <http://support.intel.com>
152
153 More specific information on configuring the driver is in
154 <file:Documentation/networking/device_drivers/ethernet/intel/ixgb.rst>.
155
156 To compile this driver as a module, choose M here. The module
157 will be called ixgb.
158
159config IXGBE
160 tristate "Intel(R) 10GbE PCI Express adapters support"
161 depends on PCI
162 select MDIO
163 select PHYLIB
164 imply PTP_1588_CLOCK
165 help
166 This driver supports Intel(R) 10GbE PCI Express family of
167 adapters. For more information on how to identify your adapter, go
168 to the Adapter & Driver ID Guide that can be located at:
169
170 <http://support.intel.com>
171
172 More specific information on configuring the driver is in
173 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbe.rst>.
174
175 To compile this driver as a module, choose M here. The module
176 will be called ixgbe.
177
178config IXGBE_HWMON
179 bool "Intel(R) 10GbE PCI Express adapters HWMON support"
180 default y
181 depends on IXGBE && HWMON && !(IXGBE=y && HWMON=m)
182 help
183 Say Y if you want to expose the thermal sensor data on some of
184 our cards, via a hwmon sysfs interface.
185
186config IXGBE_DCA
187 bool "Direct Cache Access (DCA) Support"
188 default y
189 depends on IXGBE && DCA && !(IXGBE=y && DCA=m)
190 help
191 Say Y here if you want to use Direct Cache Access (DCA) in the
192 driver. DCA is a method for warming the CPU cache before data
193 is used, with the intent of lessening the impact of cache misses.
194
195config IXGBE_DCB
196 bool "Data Center Bridging (DCB) Support"
197 default n
198 depends on IXGBE && DCB
199 help
200 Say Y here if you want to use Data Center Bridging (DCB) in the
201 driver.
202
203 If unsure, say N.
204
205config IXGBE_IPSEC
206 bool "IPSec XFRM cryptography-offload acceleration"
207 depends on IXGBE
208 depends on XFRM_OFFLOAD
209 default y
210 select XFRM_ALGO
211 help
212 Enable support for IPSec offload in ixgbe.ko
213
214config IXGBEVF
215 tristate "Intel(R) 10GbE PCI Express Virtual Function Ethernet support"
216 depends on PCI_MSI
217 help
218 This driver supports Intel(R) PCI Express virtual functions for the
219 Intel(R) ixgbe driver. For more information on how to identify your
220 adapter, go to the Adapter & Driver ID Guide that can be located at:
221
222 <http://support.intel.com>
223
224 More specific information on configuring the driver is in
225 <file:Documentation/networking/device_drivers/ethernet/intel/ixgbevf.rst>.
226
227 To compile this driver as a module, choose M here. The module
228 will be called ixgbevf. MSI-X interrupt support is required
229 for this driver to work correctly.
230
231config IXGBEVF_IPSEC
232 bool "IPSec XFRM cryptography-offload acceleration"
233 depends on IXGBEVF
234 depends on XFRM_OFFLOAD
235 default y
236 select XFRM_ALGO
237 help
238 Enable support for IPSec offload in ixgbevf.ko
239
240config I40E
241 tristate "Intel(R) Ethernet Controller XL710 Family support"
242 imply PTP_1588_CLOCK
243 depends on PCI
244 select AUXILIARY_BUS
245 help
246 This driver supports Intel(R) Ethernet Controller XL710 Family of
247 devices. For more information on how to identify your adapter, go
248 to the Adapter & Driver ID Guide that can be located at:
249
250 <http://support.intel.com>
251
252 More specific information on configuring the driver is in
253 <file:Documentation/networking/device_drivers/ethernet/intel/i40e.rst>.
254
255 To compile this driver as a module, choose M here. The module
256 will be called i40e.
257
258config I40E_DCB
259 bool "Data Center Bridging (DCB) Support"
260 default n
261 depends on I40E && DCB
262 help
263 Say Y here if you want to use Data Center Bridging (DCB) in the
264 driver.
265
266 If unsure, say N.
267
268# this is here to allow seamless migration from I40EVF --> IAVF name
269# so that CONFIG_IAVF symbol will always mirror the state of CONFIG_I40EVF
270config IAVF
271 tristate
272config I40EVF
273 tristate "Intel(R) Ethernet Adaptive Virtual Function support"
274 select IAVF
275 depends on PCI_MSI
276 help
277 This driver supports virtual functions for Intel XL710,
278 X710, X722, XXV710, and all devices advertising support for
279 Intel Ethernet Adaptive Virtual Function devices. For more
280 information on how to identify your adapter, go to the Adapter
281 & Driver ID Guide that can be located at:
282
283 <https://support.intel.com>
284
285 This driver was formerly named i40evf.
286
287 More specific information on configuring the driver is in
288 <file:Documentation/networking/device_drivers/ethernet/intel/iavf.rst>.
289
290 To compile this driver as a module, choose M here. The module
291 will be called iavf. MSI-X interrupt support is required
292 for this driver to work correctly.
293
294config ICE
295 tristate "Intel(R) Ethernet Connection E800 Series Support"
296 default n
297 depends on PCI_MSI
298 select AUXILIARY_BUS
299 select DIMLIB
300 select NET_DEVLINK
301 select PLDMFW
302 imply PTP_1588_CLOCK
303 help
304 This driver supports Intel(R) Ethernet Connection E800 Series of
305 devices. For more information on how to identify your adapter, go
306 to the Adapter & Driver ID Guide that can be located at:
307
308 <http://support.intel.com>
309
310 More specific information on configuring the driver is in
311 <file:Documentation/networking/device_drivers/ethernet/intel/ice.rst>.
312
313 To compile this driver as a module, choose M here. The module
314 will be called ice.
315
316config FM10K
317 tristate "Intel(R) FM10000 Ethernet Switch Host Interface Support"
318 default n
319 depends on PCI_MSI
320 imply PTP_1588_CLOCK
321 help
322 This driver supports Intel(R) FM10000 Ethernet Switch Host
323 Interface. For more information on how to identify your adapter,
324 go to the Adapter & Driver ID Guide that can be located at:
325
326 <http://support.intel.com>
327
328 More specific information on configuring the driver is in
329 <file:Documentation/networking/device_drivers/ethernet/intel/fm10k.rst>.
330
331 To compile this driver as a module, choose M here. The module
332 will be called fm10k. MSI-X interrupt support is required
333
334config IGC
335 tristate "Intel(R) Ethernet Controller I225-LM/I225-V support"
336 default n
337 depends on PCI
338 help
339 This driver supports Intel(R) Ethernet Controller I225-LM/I225-V
340 family of adapters.
341
342 For more information on how to identify your adapter, go
343 to the Adapter & Driver ID Guide that can be located at:
344
345 <http://support.intel.com>
346
347 To compile this driver as a module, choose M here. The module
348 will be called igc.
349
350endif # NET_VENDOR_INTEL