Loading...
1/*
2 * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
3 *
4 * This file is dual-licensed: you can use it either under the terms
5 * of the GPL or the X11 license, at your option. Note that this dual
6 * licensing only applies to this file, and not this project as a
7 * whole.
8 *
9 * a) This file is licensed under the terms of the GNU General Public
10 * License version 2. This program is licensed "as is" without any
11 * warranty of any kind, whether express or implied.
12 *
13 * Or, alternatively,
14 *
15 * b) Permission is hereby granted, free of charge, to any person
16 * obtaining a copy of this software and associated documentation
17 * files (the "Software"), to deal in the Software without
18 * restriction, including without limitation the rights to use,
19 * copy, modify, merge, publish, distribute, sublicense, and/or
20 * sell copies of the Software, and to permit persons to whom the
21 * Software is furnished to do so, subject to the following
22 * conditions:
23 *
24 * The above copyright notice and this permission notice shall be
25 * included in all copies or substantial portions of the Software.
26 *
27 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
28 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
29 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
30 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
31 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
32 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
33 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
34 * OTHER DEALINGS IN THE SOFTWARE.
35 */
36
37/dts-v1/;
38
39#include <dt-bindings/gpio/gpio.h>
40#include "berlin2q.dtsi"
41
42/ {
43 model = "Marvell BG2-Q DMP";
44 compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
45
46 memory@0 {
47 device_type = "memory";
48 reg = <0x00000000 0x80000000>;
49 };
50
51 chosen {
52 bootargs = "earlyprintk";
53 stdout-path = "serial0:115200n8";
54 };
55
56 regulators {
57 compatible = "simple-bus";
58 #address-cells = <1>;
59 #size-cells = <0>;
60
61 reg_usb0_vbus: regulator_usb0 {
62 compatible = "regulator-fixed";
63 regulator-name = "usb0_vbus";
64 regulator-min-microvolt = <5000000>;
65 regulator-max-microvolt = <5000000>;
66 gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
67 enable-active-high;
68 };
69
70 reg_usb1_vbus: regulator_usb1 {
71 compatible = "regulator-fixed";
72 regulator-name = "usb1_vbus";
73 regulator-min-microvolt = <5000000>;
74 regulator-max-microvolt = <5000000>;
75 gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
76 enable-active-high;
77 };
78
79 reg_usb2_vbus: regulator_usb2 {
80 compatible = "regulator-fixed";
81 regulator-name = "usb2_vbus";
82 regulator-min-microvolt = <5000000>;
83 regulator-max-microvolt = <5000000>;
84 gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
85 enable-active-high;
86 };
87
88 reg_sdio1_vmmc: regulator_sdio1_vmmc {
89 compatible = "regulator-fixed";
90 regulator-min-microvolt = <3300000>;
91 regulator-max-microvolt = <3300000>;
92 regulator-name = "sdio1_vmmc";
93 enable-active-high;
94 regulator-boot-on;
95 gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
96 };
97
98 reg_sdio1_vqmmc: regulator_sido1_vqmmc {
99 compatible = "regulator-gpio";
100 regulator-min-microvolt = <1800000>;
101 regulator-max-microvolt = <3300000>;
102 regulator-name = "sdio1_vqmmc";
103 regulator-type = "voltage";
104 enable-active-high;
105 gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
106 states = <3300000 0x1
107 1800000 0x0>;
108 };
109 };
110};
111
112&soc_pinctrl {
113 sd1gpio_pmux: sd1pwr-pmux {
114 groups = "G23", "G32";
115 function = "gpio";
116 };
117};
118
119&sdhci1 {
120 vmmc-supply = <®_sdio1_vmmc>;
121 vqmmc-supply = <®_sdio1_vqmmc>;
122 cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
123 wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
124 pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
125 pinctrl-names = "default";
126 status = "okay";
127};
128
129&sdhci2 {
130 bus-width = <8>;
131 non-removable;
132 status = "okay";
133};
134
135&i2c0 {
136 status = "okay";
137};
138
139&i2c2 {
140 status = "okay";
141};
142
143&uart0 {
144 status = "okay";
145};
146
147&usb_phy0 {
148 status = "okay";
149};
150
151&usb_phy2 {
152 status = "okay";
153};
154
155&usb0 {
156 vbus-supply = <®_usb0_vbus>;
157 status = "okay";
158};
159
160&usb2 {
161 vbus-supply = <®_usb2_vbus>;
162 status = "okay";
163};
164
165ð0 {
166 status = "okay";
167};
168
169&sata0 {
170 status = "okay";
171};
172
173&sata_phy {
174 status = "okay";
175};
1// SPDX-License-Identifier: (GPL-2.0 OR MIT)
2/*
3 * Copyright (C) 2014 Antoine Ténart <antoine.tenart@free-electrons.com>
4 */
5
6/dts-v1/;
7
8#include <dt-bindings/gpio/gpio.h>
9#include "berlin2q.dtsi"
10
11/ {
12 model = "Marvell BG2-Q DMP";
13 compatible = "marvell,berlin2q-dmp", "marvell,berlin2q", "marvell,berlin";
14
15 memory@0 {
16 device_type = "memory";
17 reg = <0x00000000 0x80000000>;
18 };
19
20 chosen {
21 bootargs = "earlyprintk";
22 stdout-path = "serial0:115200n8";
23 };
24
25 regulators {
26 compatible = "simple-bus";
27 #address-cells = <1>;
28 #size-cells = <0>;
29
30 reg_usb0_vbus: regulator_usb0 {
31 compatible = "regulator-fixed";
32 regulator-name = "usb0_vbus";
33 regulator-min-microvolt = <5000000>;
34 regulator-max-microvolt = <5000000>;
35 gpio = <&portb 8 GPIO_ACTIVE_HIGH>;
36 enable-active-high;
37 };
38
39 reg_usb1_vbus: regulator_usb1 {
40 compatible = "regulator-fixed";
41 regulator-name = "usb1_vbus";
42 regulator-min-microvolt = <5000000>;
43 regulator-max-microvolt = <5000000>;
44 gpio = <&portb 10 GPIO_ACTIVE_HIGH>;
45 enable-active-high;
46 };
47
48 reg_usb2_vbus: regulator_usb2 {
49 compatible = "regulator-fixed";
50 regulator-name = "usb2_vbus";
51 regulator-min-microvolt = <5000000>;
52 regulator-max-microvolt = <5000000>;
53 gpio = <&portb 12 GPIO_ACTIVE_HIGH>;
54 enable-active-high;
55 };
56
57 reg_sdio1_vmmc: regulator_sdio1_vmmc {
58 compatible = "regulator-fixed";
59 regulator-min-microvolt = <3300000>;
60 regulator-max-microvolt = <3300000>;
61 regulator-name = "sdio1_vmmc";
62 enable-active-high;
63 regulator-boot-on;
64 gpio = <&portb 21 GPIO_ACTIVE_HIGH>;
65 };
66
67 reg_sdio1_vqmmc: regulator_sido1_vqmmc {
68 compatible = "regulator-gpio";
69 regulator-min-microvolt = <1800000>;
70 regulator-max-microvolt = <3300000>;
71 regulator-name = "sdio1_vqmmc";
72 regulator-type = "voltage";
73 enable-active-high;
74 gpios = <&portb 16 GPIO_ACTIVE_HIGH>;
75 states = <3300000 0x1
76 1800000 0x0>;
77 };
78 };
79};
80
81&soc_pinctrl {
82 sd1gpio_pmux: sd1pwr-pmux {
83 groups = "G23", "G32";
84 function = "gpio";
85 };
86};
87
88&sdhci1 {
89 vmmc-supply = <®_sdio1_vmmc>;
90 vqmmc-supply = <®_sdio1_vqmmc>;
91 cd-gpios = <&portc 30 GPIO_ACTIVE_LOW>;
92 wp-gpios = <&portd 0 GPIO_ACTIVE_HIGH>;
93 pinctrl-0 = <&sd1gpio_pmux>, <&sd1_pmux>;
94 pinctrl-names = "default";
95 status = "okay";
96};
97
98&sdhci2 {
99 bus-width = <8>;
100 non-removable;
101 status = "okay";
102};
103
104&i2c0 {
105 status = "okay";
106};
107
108&i2c2 {
109 status = "okay";
110};
111
112&uart0 {
113 status = "okay";
114};
115
116&usb_phy0 {
117 status = "okay";
118};
119
120&usb_phy2 {
121 status = "okay";
122};
123
124&usb0 {
125 vbus-supply = <®_usb0_vbus>;
126 status = "okay";
127};
128
129&usb2 {
130 vbus-supply = <®_usb2_vbus>;
131 status = "okay";
132};
133
134ð0 {
135 status = "okay";
136};
137
138&sata0 {
139 status = "okay";
140};
141
142&sata_phy {
143 status = "okay";
144};