Loading...
1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6 bool "Texas Instruments (TI) devices"
7 default y
8 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about TI devices. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_TI
18
19config TI_DAVINCI_EMAC
20 tristate "TI DaVinci EMAC Support"
21 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
22 select TI_DAVINCI_MDIO
23 select TI_DAVINCI_CPDMA
24 select PHYLIB
25 ---help---
26 This driver supports TI's DaVinci Ethernet .
27
28 To compile this driver as a module, choose M here: the module
29 will be called davinci_emac_driver. This is recommended.
30
31config TI_DAVINCI_MDIO
32 tristate "TI DaVinci MDIO Support"
33 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
34 select PHYLIB
35 ---help---
36 This driver supports TI's DaVinci MDIO module.
37
38 To compile this driver as a module, choose M here: the module
39 will be called davinci_mdio. This is recommended.
40
41config TI_DAVINCI_CPDMA
42 tristate "TI DaVinci CPDMA Support"
43 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
44 ---help---
45 This driver supports TI's DaVinci CPDMA dma engine.
46
47 To compile this driver as a module, choose M here: the module
48 will be called davinci_cpdma. This is recommended.
49
50config TI_CPSW_PHY_SEL
51 bool
52 ---help---
53 This driver supports configuring of the phy mode connected to
54 the CPSW.
55
56config TI_CPSW_ALE
57 tristate "TI CPSW ALE Support"
58 ---help---
59 This driver supports TI's CPSW ALE module.
60
61config TI_CPSW
62 tristate "TI CPSW Switch Support"
63 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
64 select TI_DAVINCI_CPDMA
65 select TI_DAVINCI_MDIO
66 select TI_CPSW_PHY_SEL
67 select TI_CPSW_ALE
68 select MFD_SYSCON
69 select REGMAP
70 ---help---
71 This driver supports TI's CPSW Ethernet Switch.
72
73 To compile this driver as a module, choose M here: the module
74 will be called cpsw.
75
76config TI_CPTS
77 bool "TI Common Platform Time Sync (CPTS) Support"
78 depends on TI_CPSW || TI_KEYSTONE_NETCP
79 depends on POSIX_TIMERS
80 ---help---
81 This driver supports the Common Platform Time Sync unit of
82 the CPSW Ethernet Switch and Keystone 2 1g/10g Switch Subsystem.
83 The unit can time stamp PTP UDP/IPv4 and Layer 2 packets, and the
84 driver offers a PTP Hardware Clock.
85
86config TI_CPTS_MOD
87 tristate
88 depends on TI_CPTS
89 default y if TI_CPSW=y || TI_KEYSTONE_NETCP=y
90 select NET_PTP_CLASSIFY
91 imply PTP_1588_CLOCK
92 default m
93
94config TI_KEYSTONE_NETCP
95 tristate "TI Keystone NETCP Core Support"
96 select TI_CPSW_ALE
97 select TI_DAVINCI_MDIO
98 depends on OF
99 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
100 ---help---
101 This driver supports TI's Keystone NETCP Core.
102
103 To compile this driver as a module, choose M here: the module
104 will be called keystone_netcp.
105
106config TI_KEYSTONE_NETCP_ETHSS
107 depends on TI_KEYSTONE_NETCP
108 tristate "TI Keystone NETCP Ethernet subsystem Support"
109 ---help---
110
111 To compile this driver as a module, choose M here: the module
112 will be called keystone_netcp_ethss.
113
114config TLAN
115 tristate "TI ThunderLAN support"
116 depends on (PCI || EISA)
117 ---help---
118 If you have a PCI Ethernet network card based on the ThunderLAN chip
119 which is supported by this driver, say Y here.
120
121 Devices currently supported by this driver are Compaq Netelligent,
122 Compaq NetFlex and Olicom cards. Please read the file
123 <file:Documentation/networking/tlan.txt> for more details.
124
125 To compile this driver as a module, choose M here. The module
126 will be called tlan.
127
128 Please email feedback to <torben.mathiasen@compaq.com>.
129
130config CPMAC
131 tristate "TI AR7 CPMAC Ethernet support"
132 depends on AR7
133 select PHYLIB
134 ---help---
135 TI AR7 CPMAC Ethernet support
136
137endif # NET_VENDOR_TI
1#
2# TI device configuration
3#
4
5config NET_VENDOR_TI
6 bool "Texas Instruments (TI) devices"
7 default y
8 depends on PCI || EISA || AR7 || ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about TI devices. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_TI
18
19config TI_DAVINCI_EMAC
20 tristate "TI DaVinci EMAC Support"
21 depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
22 select TI_DAVINCI_MDIO
23 select TI_DAVINCI_CPDMA
24 select PHYLIB
25 ---help---
26 This driver supports TI's DaVinci Ethernet .
27
28 To compile this driver as a module, choose M here: the module
29 will be called davinci_emac_driver. This is recommended.
30
31config TI_DAVINCI_MDIO
32 tristate "TI DaVinci MDIO Support"
33 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS || ARCH_KEYSTONE
34 select PHYLIB
35 ---help---
36 This driver supports TI's DaVinci MDIO module.
37
38 To compile this driver as a module, choose M here: the module
39 will be called davinci_mdio. This is recommended.
40
41config TI_DAVINCI_CPDMA
42 tristate "TI DaVinci CPDMA Support"
43 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
44 ---help---
45 This driver supports TI's DaVinci CPDMA dma engine.
46
47 To compile this driver as a module, choose M here: the module
48 will be called davinci_cpdma. This is recommended.
49
50config TI_CPSW_PHY_SEL
51 bool "TI CPSW Switch Phy sel Support"
52 depends on TI_CPSW
53 ---help---
54 This driver supports configuring of the phy mode connected to
55 the CPSW.
56
57config TI_CPSW_ALE
58 tristate "TI CPSW ALE Support"
59 ---help---
60 This driver supports TI's CPSW ALE module.
61
62config TI_CPSW
63 tristate "TI CPSW Switch Support"
64 depends on ARCH_DAVINCI || ARCH_OMAP2PLUS
65 select TI_DAVINCI_CPDMA
66 select TI_DAVINCI_MDIO
67 select TI_CPSW_PHY_SEL
68 select TI_CPSW_ALE
69 select MFD_SYSCON
70 select REGMAP
71 ---help---
72 This driver supports TI's CPSW Ethernet Switch.
73
74 To compile this driver as a module, choose M here: the module
75 will be called cpsw.
76
77config TI_CPTS
78 bool "TI Common Platform Time Sync (CPTS) Support"
79 depends on TI_CPSW
80 select PTP_1588_CLOCK
81 ---help---
82 This driver supports the Common Platform Time Sync unit of
83 the CPSW Ethernet Switch. The unit can time stamp PTP UDP/IPv4
84 and Layer 2 packets, and the driver offers a PTP Hardware Clock.
85
86config TI_KEYSTONE_NETCP
87 tristate "TI Keystone NETCP Core Support"
88 select TI_CPSW_ALE
89 select TI_DAVINCI_MDIO
90 depends on OF
91 depends on KEYSTONE_NAVIGATOR_DMA && KEYSTONE_NAVIGATOR_QMSS
92 ---help---
93 This driver supports TI's Keystone NETCP Core.
94
95 To compile this driver as a module, choose M here: the module
96 will be called keystone_netcp.
97
98config TI_KEYSTONE_NETCP_ETHSS
99 depends on TI_KEYSTONE_NETCP
100 tristate "TI Keystone NETCP Ethernet subsystem Support"
101 ---help---
102
103 To compile this driver as a module, choose M here: the module
104 will be called keystone_netcp_ethss.
105
106config TLAN
107 tristate "TI ThunderLAN support"
108 depends on (PCI || EISA)
109 ---help---
110 If you have a PCI Ethernet network card based on the ThunderLAN chip
111 which is supported by this driver, say Y here.
112
113 Devices currently supported by this driver are Compaq Netelligent,
114 Compaq NetFlex and Olicom cards. Please read the file
115 <file:Documentation/networking/tlan.txt> for more details.
116
117 To compile this driver as a module, choose M here. The module
118 will be called tlan.
119
120 Please email feedback to <torben.mathiasen@compaq.com>.
121
122config CPMAC
123 tristate "TI AR7 CPMAC Ethernet support"
124 depends on AR7
125 select PHYLIB
126 ---help---
127 TI AR7 CPMAC Ethernet support
128
129endif # NET_VENDOR_TI