Loading...
1#
2# QLogic network device configuration
3#
4
5config NET_VENDOR_QLOGIC
6 bool "QLogic devices"
7 default y
8 depends on PCI
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about QLogic cards. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_QLOGIC
18
19config QLA3XXX
20 tristate "QLogic QLA3XXX Network Driver Support"
21 depends on PCI
22 ---help---
23 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
24
25 To compile this driver as a module, choose M here: the module
26 will be called qla3xxx.
27
28config QLCNIC
29 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
30 depends on PCI
31 select FW_LOADER
32 ---help---
33 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
34 devices.
35
36config QLCNIC_SRIOV
37 bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
38 depends on QLCNIC && PCI_IOV
39 default y
40 ---help---
41 This configuration parameter enables Single Root Input Output
42 Virtualization support for QLE83XX Converged Ethernet devices.
43 This allows for virtual function acceleration in virtualized
44 environments.
45
46config QLCNIC_DCB
47 bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
48 depends on QLCNIC && DCB
49 default y
50 ---help---
51 This configuration parameter enables DCB support in QLE83XX
52 and QLE82XX Converged Ethernet devices. This allows for DCB
53 get operations support through rtNetlink interface. Only CEE
54 mode of DCB is supported. PG and PFC values are related only
55 to Tx.
56
57config QLCNIC_HWMON
58 bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
59 depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
60 default y
61 ---help---
62 This configuration parameter can be used to read the
63 board temperature in Converged Ethernet devices
64 supported by qlcnic.
65
66 This data is available via the hwmon sysfs interface.
67
68config QLGE
69 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
70 depends on PCI
71 ---help---
72 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
73
74 To compile this driver as a module, choose M here: the module
75 will be called qlge.
76
77config NETXEN_NIC
78 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
79 depends on PCI
80 select FW_LOADER
81 ---help---
82 This enables the support for NetXen's Gigabit Ethernet card.
83
84config QED
85 tristate "QLogic QED 25/40/100Gb core driver"
86 depends on PCI
87 select ZLIB_INFLATE
88 select CRC8
89 ---help---
90 This enables the support for ...
91
92config QED_LL2
93 bool
94
95config QED_SRIOV
96 bool "QLogic QED 25/40/100Gb SR-IOV support"
97 depends on QED && PCI_IOV
98 default y
99 ---help---
100 This configuration parameter enables Single Root Input Output
101 Virtualization support for QED devices.
102 This allows for virtual function acceleration in virtualized
103 environments.
104
105config QEDE
106 tristate "QLogic QED 25/40/100Gb Ethernet NIC"
107 depends on QED
108 imply PTP_1588_CLOCK
109 ---help---
110 This enables the support for ...
111
112config QED_RDMA
113 bool
114
115config QED_ISCSI
116 bool
117
118config QED_FCOE
119 bool
120
121config QED_OOO
122 bool
123
124endif # NET_VENDOR_QLOGIC
1#
2# QLogic network device configuration
3#
4
5config NET_VENDOR_QLOGIC
6 bool "QLogic devices"
7 default y
8 depends on PCI
9 ---help---
10 If you have a network (Ethernet) card belonging to this class, say Y.
11
12 Note that the answer to this question doesn't directly affect the
13 kernel: saying N will just cause the configurator to skip all
14 the questions about QLogic cards. If you say Y, you will be asked for
15 your specific card in the following questions.
16
17if NET_VENDOR_QLOGIC
18
19config QLA3XXX
20 tristate "QLogic QLA3XXX Network Driver Support"
21 depends on PCI
22 ---help---
23 This driver supports QLogic ISP3XXX gigabit Ethernet cards.
24
25 To compile this driver as a module, choose M here: the module
26 will be called qla3xxx.
27
28config QLCNIC
29 tristate "QLOGIC QLCNIC 1/10Gb Converged Ethernet NIC Support"
30 depends on PCI
31 select FW_LOADER
32 ---help---
33 This driver supports QLogic QLE8240 and QLE8242 Converged Ethernet
34 devices.
35
36config QLCNIC_SRIOV
37 bool "QLOGIC QLCNIC 83XX family SR-IOV Support"
38 depends on QLCNIC && PCI_IOV
39 default y
40 ---help---
41 This configuration parameter enables Single Root Input Output
42 Virtualization support for QLE83XX Converged Ethernet devices.
43 This allows for virtual function acceleration in virtualized
44 environments.
45
46config QLCNIC_DCB
47 bool "QLOGIC QLCNIC 82XX and 83XX family DCB Support"
48 depends on QLCNIC && DCB
49 default y
50 ---help---
51 This configuration parameter enables DCB support in QLE83XX
52 and QLE82XX Converged Ethernet devices. This allows for DCB
53 get operations support through rtNetlink interface. Only CEE
54 mode of DCB is supported. PG and PFC values are related only
55 to Tx.
56
57config QLCNIC_VXLAN
58 bool "Virtual eXtensible Local Area Network (VXLAN) offload support"
59 default n
60 depends on QLCNIC && VXLAN && !(QLCNIC=y && VXLAN=m)
61 ---help---
62 This enables hardware offload support for VXLAN protocol over QLogic's
63 84XX series adapters.
64 Say Y here if you want to enable hardware offload support for
65 Virtual eXtensible Local Area Network (VXLAN) in the driver.
66
67config QLCNIC_HWMON
68 bool "QLOGIC QLCNIC 82XX and 83XX family HWMON support"
69 depends on QLCNIC && HWMON && !(QLCNIC=y && HWMON=m)
70 default y
71 ---help---
72 This configuration parameter can be used to read the
73 board temperature in Converged Ethernet devices
74 supported by qlcnic.
75
76 This data is available via the hwmon sysfs interface.
77
78config QLGE
79 tristate "QLogic QLGE 10Gb Ethernet Driver Support"
80 depends on PCI
81 ---help---
82 This driver supports QLogic ISP8XXX 10Gb Ethernet cards.
83
84 To compile this driver as a module, choose M here: the module
85 will be called qlge.
86
87config NETXEN_NIC
88 tristate "NetXen Multi port (1/10) Gigabit Ethernet NIC"
89 depends on PCI
90 select FW_LOADER
91 ---help---
92 This enables the support for NetXen's Gigabit Ethernet card.
93
94config QED
95 tristate "QLogic QED 25/40/100Gb core driver"
96 depends on PCI
97 select ZLIB_INFLATE
98 ---help---
99 This enables the support for ...
100
101config QEDE
102 tristate "QLogic QED 25/40/100Gb Ethernet NIC"
103 depends on QED
104 ---help---
105 This enables the support for ...
106endif # NET_VENDOR_QLOGIC