Loading...
1/* SPDX-License-Identifier: GPL-2.0 */
2/*
3 * ld script for the x86 kernel
4 *
5 * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
6 *
7 * Modernisation, unification and other changes and fixes:
8 * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
9 *
10 *
11 * Don't define absolute symbols until and unless you know that symbol
12 * value is should remain constant even if kernel image is relocated
13 * at run time. Absolute symbols are not relocated. If symbol value should
14 * change if kernel is relocated, make the symbol section relative and
15 * put it inside the section definition.
16 */
17
18#ifdef CONFIG_X86_32
19#define LOAD_OFFSET __PAGE_OFFSET
20#else
21#define LOAD_OFFSET __START_KERNEL_map
22#endif
23
24#include <asm-generic/vmlinux.lds.h>
25#include <asm/asm-offsets.h>
26#include <asm/thread_info.h>
27#include <asm/page_types.h>
28#include <asm/orc_lookup.h>
29#include <asm/cache.h>
30#include <asm/boot.h>
31
32#undef i386 /* in case the preprocessor is a 32bit one */
33
34OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
35
36#ifdef CONFIG_X86_32
37OUTPUT_ARCH(i386)
38ENTRY(phys_startup_32)
39jiffies = jiffies_64;
40#else
41OUTPUT_ARCH(i386:x86-64)
42ENTRY(phys_startup_64)
43jiffies_64 = jiffies;
44#endif
45
46#if defined(CONFIG_X86_64)
47/*
48 * On 64-bit, align RODATA to 2MB so we retain large page mappings for
49 * boundaries spanning kernel text, rodata and data sections.
50 *
51 * However, kernel identity mappings will have different RWX permissions
52 * to the pages mapping to text and to the pages padding (which are freed) the
53 * text section. Hence kernel identity mappings will be broken to smaller
54 * pages. For 64-bit, kernel text and kernel identity mappings are different,
55 * so we can enable protection checks as well as retain 2MB large page
56 * mappings for kernel text.
57 */
58#define X64_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE);
59
60#define X64_ALIGN_RODATA_END \
61 . = ALIGN(HPAGE_SIZE); \
62 __end_rodata_hpage_align = .;
63
64#define ALIGN_ENTRY_TEXT_BEGIN . = ALIGN(PMD_SIZE);
65#define ALIGN_ENTRY_TEXT_END . = ALIGN(PMD_SIZE);
66
67#else
68
69#define X64_ALIGN_RODATA_BEGIN
70#define X64_ALIGN_RODATA_END
71
72#define ALIGN_ENTRY_TEXT_BEGIN
73#define ALIGN_ENTRY_TEXT_END
74
75#endif
76
77PHDRS {
78 text PT_LOAD FLAGS(5); /* R_E */
79 data PT_LOAD FLAGS(6); /* RW_ */
80#ifdef CONFIG_X86_64
81#ifdef CONFIG_SMP
82 percpu PT_LOAD FLAGS(6); /* RW_ */
83#endif
84 init PT_LOAD FLAGS(7); /* RWE */
85#endif
86 note PT_NOTE FLAGS(0); /* ___ */
87}
88
89SECTIONS
90{
91#ifdef CONFIG_X86_32
92 . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
93 phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
94#else
95 . = __START_KERNEL;
96 phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
97#endif
98
99 /* Text and read-only data */
100 .text : AT(ADDR(.text) - LOAD_OFFSET) {
101 _text = .;
102 _stext = .;
103 /* bootstrapping code */
104 HEAD_TEXT
105 TEXT_TEXT
106 SCHED_TEXT
107 CPUIDLE_TEXT
108 LOCK_TEXT
109 KPROBES_TEXT
110 ALIGN_ENTRY_TEXT_BEGIN
111 ENTRY_TEXT
112 IRQENTRY_TEXT
113 ALIGN_ENTRY_TEXT_END
114 SOFTIRQENTRY_TEXT
115 *(.fixup)
116 *(.gnu.warning)
117
118#ifdef CONFIG_X86_64
119 . = ALIGN(PAGE_SIZE);
120 VMLINUX_SYMBOL(__entry_trampoline_start) = .;
121 _entry_trampoline = .;
122 *(.entry_trampoline)
123 . = ALIGN(PAGE_SIZE);
124 VMLINUX_SYMBOL(__entry_trampoline_end) = .;
125 ASSERT(. - _entry_trampoline == PAGE_SIZE, "entry trampoline is too big");
126#endif
127
128#ifdef CONFIG_RETPOLINE
129 __indirect_thunk_start = .;
130 *(.text.__x86.indirect_thunk)
131 __indirect_thunk_end = .;
132#endif
133
134 /* End of text section */
135 _etext = .;
136 } :text = 0x9090
137
138 NOTES :text :note
139
140 EXCEPTION_TABLE(16) :text = 0x9090
141
142 /* .text should occupy whole number of pages */
143 . = ALIGN(PAGE_SIZE);
144 X64_ALIGN_RODATA_BEGIN
145 RO_DATA(PAGE_SIZE)
146 X64_ALIGN_RODATA_END
147
148 /* Data */
149 .data : AT(ADDR(.data) - LOAD_OFFSET) {
150 /* Start of data section */
151 _sdata = .;
152
153 /* init_task */
154 INIT_TASK_DATA(THREAD_SIZE)
155
156#ifdef CONFIG_X86_32
157 /* 32 bit has nosave before _edata */
158 NOSAVE_DATA
159#endif
160
161 PAGE_ALIGNED_DATA(PAGE_SIZE)
162
163 CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
164
165 DATA_DATA
166 CONSTRUCTORS
167
168 /* rarely changed data like cpu maps */
169 READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
170
171 /* End of data section */
172 _edata = .;
173 } :data
174
175 BUG_TABLE
176
177 ORC_UNWIND_TABLE
178
179 . = ALIGN(PAGE_SIZE);
180 __vvar_page = .;
181
182 .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
183 /* work around gold bug 13023 */
184 __vvar_beginning_hack = .;
185
186 /* Place all vvars at the offsets in asm/vvar.h. */
187#define EMIT_VVAR(name, offset) \
188 . = __vvar_beginning_hack + offset; \
189 *(.vvar_ ## name)
190#define __VVAR_KERNEL_LDS
191#include <asm/vvar.h>
192#undef __VVAR_KERNEL_LDS
193#undef EMIT_VVAR
194
195 /*
196 * Pad the rest of the page with zeros. Otherwise the loader
197 * can leave garbage here.
198 */
199 . = __vvar_beginning_hack + PAGE_SIZE;
200 } :data
201
202 . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
203
204 /* Init code and data - will be freed after init */
205 . = ALIGN(PAGE_SIZE);
206 .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
207 __init_begin = .; /* paired with __init_end */
208 }
209
210#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
211 /*
212 * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
213 * output PHDR, so the next output section - .init.text - should
214 * start another segment - init.
215 */
216 PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
217 ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
218 "per-CPU data too large - increase CONFIG_PHYSICAL_START")
219#endif
220
221 INIT_TEXT_SECTION(PAGE_SIZE)
222#ifdef CONFIG_X86_64
223 :init
224#endif
225
226 /*
227 * Section for code used exclusively before alternatives are run. All
228 * references to such code must be patched out by alternatives, normally
229 * by using X86_FEATURE_ALWAYS CPU feature bit.
230 *
231 * See static_cpu_has() for an example.
232 */
233 .altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
234 *(.altinstr_aux)
235 }
236
237 INIT_DATA_SECTION(16)
238
239 .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
240 __x86_cpu_dev_start = .;
241 *(.x86_cpu_dev.init)
242 __x86_cpu_dev_end = .;
243 }
244
245#ifdef CONFIG_X86_INTEL_MID
246 .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
247 LOAD_OFFSET) {
248 __x86_intel_mid_dev_start = .;
249 *(.x86_intel_mid_dev.init)
250 __x86_intel_mid_dev_end = .;
251 }
252#endif
253
254 /*
255 * start address and size of operations which during runtime
256 * can be patched with virtualization friendly instructions or
257 * baremetal native ones. Think page table operations.
258 * Details in paravirt_types.h
259 */
260 . = ALIGN(8);
261 .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
262 __parainstructions = .;
263 *(.parainstructions)
264 __parainstructions_end = .;
265 }
266
267 /*
268 * struct alt_inst entries. From the header (alternative.h):
269 * "Alternative instructions for different CPU types or capabilities"
270 * Think locking instructions on spinlocks.
271 */
272 . = ALIGN(8);
273 .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
274 __alt_instructions = .;
275 *(.altinstructions)
276 __alt_instructions_end = .;
277 }
278
279 /*
280 * And here are the replacement instructions. The linker sticks
281 * them as binary blobs. The .altinstructions has enough data to
282 * get the address and the length of them to patch the kernel safely.
283 */
284 .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
285 *(.altinstr_replacement)
286 }
287
288 /*
289 * struct iommu_table_entry entries are injected in this section.
290 * It is an array of IOMMUs which during run time gets sorted depending
291 * on its dependency order. After rootfs_initcall is complete
292 * this section can be safely removed.
293 */
294 .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
295 __iommu_table = .;
296 *(.iommu_table)
297 __iommu_table_end = .;
298 }
299
300 . = ALIGN(8);
301 .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
302 __apicdrivers = .;
303 *(.apicdrivers);
304 __apicdrivers_end = .;
305 }
306
307 . = ALIGN(8);
308 /*
309 * .exit.text is discard at runtime, not link time, to deal with
310 * references from .altinstructions and .eh_frame
311 */
312 .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
313 EXIT_TEXT
314 }
315
316 .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
317 EXIT_DATA
318 }
319
320#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
321 PERCPU_SECTION(INTERNODE_CACHE_BYTES)
322#endif
323
324 . = ALIGN(PAGE_SIZE);
325
326 /* freed after init ends here */
327 .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
328 __init_end = .;
329 }
330
331 /*
332 * smp_locks might be freed after init
333 * start/end must be page aligned
334 */
335 . = ALIGN(PAGE_SIZE);
336 .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
337 __smp_locks = .;
338 *(.smp_locks)
339 . = ALIGN(PAGE_SIZE);
340 __smp_locks_end = .;
341 }
342
343#ifdef CONFIG_X86_64
344 .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
345 NOSAVE_DATA
346 }
347#endif
348
349 /* BSS */
350 . = ALIGN(PAGE_SIZE);
351 .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
352 __bss_start = .;
353 *(.bss..page_aligned)
354 *(.bss)
355 . = ALIGN(PAGE_SIZE);
356 __bss_stop = .;
357 }
358
359 . = ALIGN(PAGE_SIZE);
360 .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
361 __brk_base = .;
362 . += 64 * 1024; /* 64k alignment slop space */
363 *(.brk_reservation) /* areas brk users have reserved */
364 __brk_limit = .;
365 }
366
367 . = ALIGN(PAGE_SIZE); /* keep VO_INIT_SIZE page aligned */
368 _end = .;
369
370 STABS_DEBUG
371 DWARF_DEBUG
372
373 /* Sections to be discarded */
374 DISCARDS
375 /DISCARD/ : {
376 *(.eh_frame)
377 }
378}
379
380
381#ifdef CONFIG_X86_32
382/*
383 * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
384 */
385. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
386 "kernel image bigger than KERNEL_IMAGE_SIZE");
387#else
388/*
389 * Per-cpu symbols which need to be offset from __per_cpu_load
390 * for the boot processor.
391 */
392#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
393INIT_PER_CPU(gdt_page);
394INIT_PER_CPU(irq_stack_union);
395
396/*
397 * Build-time check on the image size:
398 */
399. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
400 "kernel image bigger than KERNEL_IMAGE_SIZE");
401
402#ifdef CONFIG_SMP
403. = ASSERT((irq_stack_union == 0),
404 "irq_stack_union is not at start of per-cpu area");
405#endif
406
407#endif /* CONFIG_X86_32 */
408
409#ifdef CONFIG_KEXEC_CORE
410#include <asm/kexec.h>
411
412. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
413 "kexec control code size is too big");
414#endif
415
1/*
2 * ld script for the x86 kernel
3 *
4 * Historic 32-bit version written by Martin Mares <mj@atrey.karlin.mff.cuni.cz>
5 *
6 * Modernisation, unification and other changes and fixes:
7 * Copyright (C) 2007-2009 Sam Ravnborg <sam@ravnborg.org>
8 *
9 *
10 * Don't define absolute symbols until and unless you know that symbol
11 * value is should remain constant even if kernel image is relocated
12 * at run time. Absolute symbols are not relocated. If symbol value should
13 * change if kernel is relocated, make the symbol section relative and
14 * put it inside the section definition.
15 */
16
17#ifdef CONFIG_X86_32
18#define LOAD_OFFSET __PAGE_OFFSET
19#else
20#define LOAD_OFFSET __START_KERNEL_map
21#endif
22
23#include <asm-generic/vmlinux.lds.h>
24#include <asm/asm-offsets.h>
25#include <asm/thread_info.h>
26#include <asm/page_types.h>
27#include <asm/cache.h>
28#include <asm/boot.h>
29
30#undef i386 /* in case the preprocessor is a 32bit one */
31
32OUTPUT_FORMAT(CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT, CONFIG_OUTPUT_FORMAT)
33
34#ifdef CONFIG_X86_32
35OUTPUT_ARCH(i386)
36ENTRY(phys_startup_32)
37jiffies = jiffies_64;
38#else
39OUTPUT_ARCH(i386:x86-64)
40ENTRY(phys_startup_64)
41jiffies_64 = jiffies;
42#endif
43
44#if defined(CONFIG_X86_64)
45/*
46 * On 64-bit, align RODATA to 2MB so we retain large page mappings for
47 * boundaries spanning kernel text, rodata and data sections.
48 *
49 * However, kernel identity mappings will have different RWX permissions
50 * to the pages mapping to text and to the pages padding (which are freed) the
51 * text section. Hence kernel identity mappings will be broken to smaller
52 * pages. For 64-bit, kernel text and kernel identity mappings are different,
53 * so we can enable protection checks as well as retain 2MB large page
54 * mappings for kernel text.
55 */
56#define X64_ALIGN_RODATA_BEGIN . = ALIGN(HPAGE_SIZE);
57
58#define X64_ALIGN_RODATA_END \
59 . = ALIGN(HPAGE_SIZE); \
60 __end_rodata_hpage_align = .;
61
62#else
63
64#define X64_ALIGN_RODATA_BEGIN
65#define X64_ALIGN_RODATA_END
66
67#endif
68
69PHDRS {
70 text PT_LOAD FLAGS(5); /* R_E */
71 data PT_LOAD FLAGS(6); /* RW_ */
72#ifdef CONFIG_X86_64
73#ifdef CONFIG_SMP
74 percpu PT_LOAD FLAGS(6); /* RW_ */
75#endif
76 init PT_LOAD FLAGS(7); /* RWE */
77#endif
78 note PT_NOTE FLAGS(0); /* ___ */
79}
80
81SECTIONS
82{
83#ifdef CONFIG_X86_32
84 . = LOAD_OFFSET + LOAD_PHYSICAL_ADDR;
85 phys_startup_32 = ABSOLUTE(startup_32 - LOAD_OFFSET);
86#else
87 . = __START_KERNEL;
88 phys_startup_64 = ABSOLUTE(startup_64 - LOAD_OFFSET);
89#endif
90
91 /* Text and read-only data */
92 .text : AT(ADDR(.text) - LOAD_OFFSET) {
93 _text = .;
94 /* bootstrapping code */
95 HEAD_TEXT
96 . = ALIGN(8);
97 _stext = .;
98 TEXT_TEXT
99 SCHED_TEXT
100 LOCK_TEXT
101 KPROBES_TEXT
102 ENTRY_TEXT
103 IRQENTRY_TEXT
104 SOFTIRQENTRY_TEXT
105 *(.fixup)
106 *(.gnu.warning)
107 /* End of text section */
108 _etext = .;
109 } :text = 0x9090
110
111 NOTES :text :note
112
113 EXCEPTION_TABLE(16) :text = 0x9090
114
115 /* .text should occupy whole number of pages */
116 . = ALIGN(PAGE_SIZE);
117 X64_ALIGN_RODATA_BEGIN
118 RO_DATA(PAGE_SIZE)
119 X64_ALIGN_RODATA_END
120
121 /* Data */
122 .data : AT(ADDR(.data) - LOAD_OFFSET) {
123 /* Start of data section */
124 _sdata = .;
125
126 /* init_task */
127 INIT_TASK_DATA(THREAD_SIZE)
128
129#ifdef CONFIG_X86_32
130 /* 32 bit has nosave before _edata */
131 NOSAVE_DATA
132#endif
133
134 PAGE_ALIGNED_DATA(PAGE_SIZE)
135
136 CACHELINE_ALIGNED_DATA(L1_CACHE_BYTES)
137
138 DATA_DATA
139 CONSTRUCTORS
140
141 /* rarely changed data like cpu maps */
142 READ_MOSTLY_DATA(INTERNODE_CACHE_BYTES)
143
144 /* End of data section */
145 _edata = .;
146 } :data
147
148
149 . = ALIGN(PAGE_SIZE);
150 __vvar_page = .;
151
152 .vvar : AT(ADDR(.vvar) - LOAD_OFFSET) {
153 /* work around gold bug 13023 */
154 __vvar_beginning_hack = .;
155
156 /* Place all vvars at the offsets in asm/vvar.h. */
157#define EMIT_VVAR(name, offset) \
158 . = __vvar_beginning_hack + offset; \
159 *(.vvar_ ## name)
160#define __VVAR_KERNEL_LDS
161#include <asm/vvar.h>
162#undef __VVAR_KERNEL_LDS
163#undef EMIT_VVAR
164
165 /*
166 * Pad the rest of the page with zeros. Otherwise the loader
167 * can leave garbage here.
168 */
169 . = __vvar_beginning_hack + PAGE_SIZE;
170 } :data
171
172 . = ALIGN(__vvar_page + PAGE_SIZE, PAGE_SIZE);
173
174 /* Init code and data - will be freed after init */
175 . = ALIGN(PAGE_SIZE);
176 .init.begin : AT(ADDR(.init.begin) - LOAD_OFFSET) {
177 __init_begin = .; /* paired with __init_end */
178 }
179
180#if defined(CONFIG_X86_64) && defined(CONFIG_SMP)
181 /*
182 * percpu offsets are zero-based on SMP. PERCPU_VADDR() changes the
183 * output PHDR, so the next output section - .init.text - should
184 * start another segment - init.
185 */
186 PERCPU_VADDR(INTERNODE_CACHE_BYTES, 0, :percpu)
187 ASSERT(SIZEOF(.data..percpu) < CONFIG_PHYSICAL_START,
188 "per-CPU data too large - increase CONFIG_PHYSICAL_START")
189#endif
190
191 INIT_TEXT_SECTION(PAGE_SIZE)
192#ifdef CONFIG_X86_64
193 :init
194#endif
195
196 /*
197 * Section for code used exclusively before alternatives are run. All
198 * references to such code must be patched out by alternatives, normally
199 * by using X86_FEATURE_ALWAYS CPU feature bit.
200 *
201 * See static_cpu_has() for an example.
202 */
203 .altinstr_aux : AT(ADDR(.altinstr_aux) - LOAD_OFFSET) {
204 *(.altinstr_aux)
205 }
206
207 INIT_DATA_SECTION(16)
208
209 .x86_cpu_dev.init : AT(ADDR(.x86_cpu_dev.init) - LOAD_OFFSET) {
210 __x86_cpu_dev_start = .;
211 *(.x86_cpu_dev.init)
212 __x86_cpu_dev_end = .;
213 }
214
215#ifdef CONFIG_X86_INTEL_MID
216 .x86_intel_mid_dev.init : AT(ADDR(.x86_intel_mid_dev.init) - \
217 LOAD_OFFSET) {
218 __x86_intel_mid_dev_start = .;
219 *(.x86_intel_mid_dev.init)
220 __x86_intel_mid_dev_end = .;
221 }
222#endif
223
224 /*
225 * start address and size of operations which during runtime
226 * can be patched with virtualization friendly instructions or
227 * baremetal native ones. Think page table operations.
228 * Details in paravirt_types.h
229 */
230 . = ALIGN(8);
231 .parainstructions : AT(ADDR(.parainstructions) - LOAD_OFFSET) {
232 __parainstructions = .;
233 *(.parainstructions)
234 __parainstructions_end = .;
235 }
236
237 /*
238 * struct alt_inst entries. From the header (alternative.h):
239 * "Alternative instructions for different CPU types or capabilities"
240 * Think locking instructions on spinlocks.
241 */
242 . = ALIGN(8);
243 .altinstructions : AT(ADDR(.altinstructions) - LOAD_OFFSET) {
244 __alt_instructions = .;
245 *(.altinstructions)
246 __alt_instructions_end = .;
247 }
248
249 /*
250 * And here are the replacement instructions. The linker sticks
251 * them as binary blobs. The .altinstructions has enough data to
252 * get the address and the length of them to patch the kernel safely.
253 */
254 .altinstr_replacement : AT(ADDR(.altinstr_replacement) - LOAD_OFFSET) {
255 *(.altinstr_replacement)
256 }
257
258 /*
259 * struct iommu_table_entry entries are injected in this section.
260 * It is an array of IOMMUs which during run time gets sorted depending
261 * on its dependency order. After rootfs_initcall is complete
262 * this section can be safely removed.
263 */
264 .iommu_table : AT(ADDR(.iommu_table) - LOAD_OFFSET) {
265 __iommu_table = .;
266 *(.iommu_table)
267 __iommu_table_end = .;
268 }
269
270 . = ALIGN(8);
271 .apicdrivers : AT(ADDR(.apicdrivers) - LOAD_OFFSET) {
272 __apicdrivers = .;
273 *(.apicdrivers);
274 __apicdrivers_end = .;
275 }
276
277 . = ALIGN(8);
278 /*
279 * .exit.text is discard at runtime, not link time, to deal with
280 * references from .altinstructions and .eh_frame
281 */
282 .exit.text : AT(ADDR(.exit.text) - LOAD_OFFSET) {
283 EXIT_TEXT
284 }
285
286 .exit.data : AT(ADDR(.exit.data) - LOAD_OFFSET) {
287 EXIT_DATA
288 }
289
290#if !defined(CONFIG_X86_64) || !defined(CONFIG_SMP)
291 PERCPU_SECTION(INTERNODE_CACHE_BYTES)
292#endif
293
294 . = ALIGN(PAGE_SIZE);
295
296 /* freed after init ends here */
297 .init.end : AT(ADDR(.init.end) - LOAD_OFFSET) {
298 __init_end = .;
299 }
300
301 /*
302 * smp_locks might be freed after init
303 * start/end must be page aligned
304 */
305 . = ALIGN(PAGE_SIZE);
306 .smp_locks : AT(ADDR(.smp_locks) - LOAD_OFFSET) {
307 __smp_locks = .;
308 *(.smp_locks)
309 . = ALIGN(PAGE_SIZE);
310 __smp_locks_end = .;
311 }
312
313#ifdef CONFIG_X86_64
314 .data_nosave : AT(ADDR(.data_nosave) - LOAD_OFFSET) {
315 NOSAVE_DATA
316 }
317#endif
318
319 /* BSS */
320 . = ALIGN(PAGE_SIZE);
321 .bss : AT(ADDR(.bss) - LOAD_OFFSET) {
322 __bss_start = .;
323 *(.bss..page_aligned)
324 *(.bss)
325 . = ALIGN(PAGE_SIZE);
326 __bss_stop = .;
327 }
328
329 . = ALIGN(PAGE_SIZE);
330 .brk : AT(ADDR(.brk) - LOAD_OFFSET) {
331 __brk_base = .;
332 . += 64 * 1024; /* 64k alignment slop space */
333 *(.brk_reservation) /* areas brk users have reserved */
334 __brk_limit = .;
335 }
336
337 . = ALIGN(PAGE_SIZE);
338 _end = .;
339
340 STABS_DEBUG
341 DWARF_DEBUG
342
343 /* Sections to be discarded */
344 DISCARDS
345 /DISCARD/ : {
346 *(.eh_frame)
347 *(__func_stack_frame_non_standard)
348 }
349}
350
351
352#ifdef CONFIG_X86_32
353/*
354 * The ASSERT() sink to . is intentional, for binutils 2.14 compatibility:
355 */
356. = ASSERT((_end - LOAD_OFFSET <= KERNEL_IMAGE_SIZE),
357 "kernel image bigger than KERNEL_IMAGE_SIZE");
358#else
359/*
360 * Per-cpu symbols which need to be offset from __per_cpu_load
361 * for the boot processor.
362 */
363#define INIT_PER_CPU(x) init_per_cpu__##x = x + __per_cpu_load
364INIT_PER_CPU(gdt_page);
365INIT_PER_CPU(irq_stack_union);
366
367/*
368 * Build-time check on the image size:
369 */
370. = ASSERT((_end - _text <= KERNEL_IMAGE_SIZE),
371 "kernel image bigger than KERNEL_IMAGE_SIZE");
372
373#ifdef CONFIG_SMP
374. = ASSERT((irq_stack_union == 0),
375 "irq_stack_union is not at start of per-cpu area");
376#endif
377
378#endif /* CONFIG_X86_32 */
379
380#ifdef CONFIG_KEXEC_CORE
381#include <asm/kexec.h>
382
383. = ASSERT(kexec_control_code_size <= KEXEC_CONTROL_CODE_MAX_SIZE,
384 "kexec control code size is too big");
385#endif
386