Loading...
1// SPDX-License-Identifier: GPL-2.0
2#include <dt-bindings/input/input.h>
3#include "tegra124.dtsi"
4
5/ {
6 aliases {
7 rtc0 = "/i2c@7000d000/pmic@40";
8 rtc1 = "/rtc@7000e000";
9 serial0 = &uarta;
10 };
11
12 chosen {
13 stdout-path = "serial0:115200n8";
14 };
15
16 memory {
17 reg = <0x0 0x80000000 0x0 0x80000000>;
18 };
19
20 host1x@50000000 {
21 hdmi@54280000 {
22 status = "okay";
23
24 vdd-supply = <&vdd_3v3_hdmi>;
25 pll-supply = <&vdd_hdmi_pll>;
26 hdmi-supply = <&vdd_5v0_hdmi>;
27
28 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
29 nvidia,hpd-gpio =
30 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
31 };
32
33 sor@54540000 {
34 status = "okay";
35
36 nvidia,dpaux = <&dpaux>;
37 nvidia,panel = <&panel>;
38 };
39
40 dpaux@545c0000 {
41 vdd-supply = <&vdd_3v3_panel>;
42 status = "okay";
43 };
44 };
45
46 gpu@0,57000000 {
47 status = "okay";
48
49 vdd-supply = <&vdd_gpu>;
50 };
51
52 serial@70006000 {
53 /* Debug connector on the bottom of the board near SD card. */
54 status = "okay";
55 };
56
57 pwm@7000a000 {
58 status = "okay";
59 };
60
61 i2c@7000c000 {
62 status = "okay";
63 clock-frequency = <100000>;
64
65 acodec: audio-codec@10 {
66 compatible = "maxim,max98090";
67 reg = <0x10>;
68 interrupt-parent = <&gpio>;
69 interrupts = <TEGRA_GPIO(H, 4) IRQ_TYPE_EDGE_FALLING>;
70 };
71
72 temperature-sensor@4c {
73 compatible = "ti,tmp451";
74 reg = <0x4c>;
75 interrupt-parent = <&gpio>;
76 interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
77
78 #thermal-sensor-cells = <1>;
79 };
80 };
81
82 i2c@7000c400 {
83 status = "okay";
84 clock-frequency = <100000>;
85
86 trackpad@15 {
87 compatible = "elan,ekth3000";
88 reg = <0x15>;
89 interrupt-parent = <&gpio>;
90 interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
91 wakeup-source;
92 };
93 };
94
95 i2c@7000c500 {
96 status = "okay";
97 clock-frequency = <400000>;
98
99 tpm@20 {
100 compatible = "infineon,slb9645tt";
101 reg = <0x20>;
102 };
103 };
104
105 hdmi_ddc: i2c@7000c700 {
106 status = "okay";
107 clock-frequency = <100000>;
108 };
109
110 i2c@7000d000 {
111 status = "okay";
112 clock-frequency = <400000>;
113
114 pmic: pmic@40 {
115 compatible = "ams,as3722";
116 reg = <0x40>;
117 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
118
119 ams,system-power-controller;
120
121 #interrupt-cells = <2>;
122 interrupt-controller;
123
124 gpio-controller;
125 #gpio-cells = <2>;
126
127 pinctrl-names = "default";
128 pinctrl-0 = <&as3722_default>;
129
130 as3722_default: pinmux {
131 gpio0 {
132 pins = "gpio0";
133 function = "gpio";
134 bias-pull-down;
135 };
136
137 gpio1 {
138 pins = "gpio1";
139 function = "gpio";
140 bias-pull-up;
141 };
142
143 gpio2_4_7 {
144 pins = "gpio2", "gpio4", "gpio7";
145 function = "gpio";
146 bias-pull-up;
147 };
148
149 gpio3_6 {
150 pins = "gpio3", "gpio6";
151 bias-high-impedance;
152 };
153
154 gpio5 {
155 pins = "gpio5";
156 function = "clk32k-out";
157 bias-pull-down;
158 };
159 };
160
161 regulators {
162 vsup-sd2-supply = <&vdd_5v0_sys>;
163 vsup-sd3-supply = <&vdd_5v0_sys>;
164 vsup-sd4-supply = <&vdd_5v0_sys>;
165 vsup-sd5-supply = <&vdd_5v0_sys>;
166 vin-ldo0-supply = <&vdd_1v35_lp0>;
167 vin-ldo1-6-supply = <&vdd_3v3_run>;
168 vin-ldo2-5-7-supply = <&vddio_1v8>;
169 vin-ldo3-4-supply = <&vdd_3v3_sys>;
170 vin-ldo9-10-supply = <&vdd_5v0_sys>;
171 vin-ldo11-supply = <&vdd_3v3_run>;
172
173 vdd_cpu: sd0 {
174 regulator-name = "+VDD_CPU_AP";
175 regulator-min-microvolt = <700000>;
176 regulator-max-microvolt = <1350000>;
177 regulator-min-microamp = <3500000>;
178 regulator-max-microamp = <3500000>;
179 regulator-always-on;
180 regulator-boot-on;
181 ams,ext-control = <2>;
182 };
183
184 sd1 {
185 regulator-name = "+VDD_CORE";
186 regulator-min-microvolt = <700000>;
187 regulator-max-microvolt = <1350000>;
188 regulator-min-microamp = <2500000>;
189 regulator-max-microamp = <4000000>;
190 regulator-always-on;
191 regulator-boot-on;
192 ams,ext-control = <1>;
193 };
194
195 vdd_1v35_lp0: sd2 {
196 regulator-name = "+1.35V_LP0(sd2)";
197 regulator-min-microvolt = <1350000>;
198 regulator-max-microvolt = <1350000>;
199 regulator-always-on;
200 regulator-boot-on;
201 };
202
203 sd3 {
204 regulator-name = "+1.35V_LP0(sd3)";
205 regulator-min-microvolt = <1350000>;
206 regulator-max-microvolt = <1350000>;
207 regulator-always-on;
208 regulator-boot-on;
209 };
210
211 vdd_1v05_run: sd4 {
212 regulator-name = "+1.05V_RUN";
213 regulator-min-microvolt = <1050000>;
214 regulator-max-microvolt = <1050000>;
215 };
216
217 vddio_1v8: sd5 {
218 regulator-name = "+1.8V_VDDIO";
219 regulator-min-microvolt = <1800000>;
220 regulator-max-microvolt = <1800000>;
221 regulator-always-on;
222 };
223
224 vdd_gpu: sd6 {
225 regulator-name = "+VDD_GPU_AP";
226 regulator-min-microvolt = <650000>;
227 regulator-max-microvolt = <1200000>;
228 regulator-min-microamp = <3500000>;
229 regulator-max-microamp = <3500000>;
230 regulator-boot-on;
231 regulator-always-on;
232 };
233
234 avdd_1v05_run: ldo0 {
235 regulator-name = "+1.05V_RUN_AVDD";
236 regulator-min-microvolt = <1050000>;
237 regulator-max-microvolt = <1050000>;
238 regulator-boot-on;
239 regulator-always-on;
240 ams,ext-control = <1>;
241 };
242
243 ldo1 {
244 regulator-name = "+1.8V_RUN_CAM";
245 regulator-min-microvolt = <1800000>;
246 regulator-max-microvolt = <1800000>;
247 };
248
249 ldo2 {
250 regulator-name = "+1.2V_GEN_AVDD";
251 regulator-min-microvolt = <1200000>;
252 regulator-max-microvolt = <1200000>;
253 regulator-boot-on;
254 regulator-always-on;
255 };
256
257 ldo3 {
258 regulator-name = "+1.00V_LP0_VDD_RTC";
259 regulator-min-microvolt = <1000000>;
260 regulator-max-microvolt = <1000000>;
261 regulator-boot-on;
262 regulator-always-on;
263 ams,enable-tracking;
264 };
265
266 vdd_run_cam: ldo4 {
267 regulator-name = "+3.3V_RUN_CAM";
268 regulator-min-microvolt = <2800000>;
269 regulator-max-microvolt = <2800000>;
270 };
271
272 ldo5 {
273 regulator-name = "+1.2V_RUN_CAM_FRONT";
274 regulator-min-microvolt = <1200000>;
275 regulator-max-microvolt = <1200000>;
276 };
277
278 vddio_sdmmc3: ldo6 {
279 regulator-name = "+VDDIO_SDMMC3";
280 regulator-min-microvolt = <1800000>;
281 regulator-max-microvolt = <3300000>;
282 };
283
284 ldo7 {
285 regulator-name = "+1.05V_RUN_CAM_REAR";
286 regulator-min-microvolt = <1050000>;
287 regulator-max-microvolt = <1050000>;
288 };
289
290 ldo9 {
291 regulator-name = "+2.8V_RUN_TOUCH";
292 regulator-min-microvolt = <2800000>;
293 regulator-max-microvolt = <2800000>;
294 };
295
296 ldo10 {
297 regulator-name = "+2.8V_RUN_CAM_AF";
298 regulator-min-microvolt = <2800000>;
299 regulator-max-microvolt = <2800000>;
300 };
301
302 ldo11 {
303 regulator-name = "+1.8V_RUN_VPP_FUSE";
304 regulator-min-microvolt = <1800000>;
305 regulator-max-microvolt = <1800000>;
306 };
307 };
308 };
309 };
310
311 spi@7000d400 {
312 status = "okay";
313
314 cros_ec: cros-ec@0 {
315 compatible = "google,cros-ec-spi";
316 spi-max-frequency = <3000000>;
317 interrupt-parent = <&gpio>;
318 interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
319 reg = <0>;
320
321 google,cros-ec-spi-msg-delay = <2000>;
322
323 i2c-tunnel {
324 compatible = "google,cros-ec-i2c-tunnel";
325 #address-cells = <1>;
326 #size-cells = <0>;
327
328 google,remote-bus = <0>;
329
330 charger: bq24735@9 {
331 compatible = "ti,bq24735";
332 reg = <0x9>;
333 interrupt-parent = <&gpio>;
334 interrupts = <TEGRA_GPIO(J, 0)
335 IRQ_TYPE_EDGE_BOTH>;
336 ti,ac-detect-gpios = <&gpio
337 TEGRA_GPIO(J, 0)
338 GPIO_ACTIVE_HIGH>;
339 ti,external-control;
340 };
341
342 battery: sbs-battery@b {
343 compatible = "sbs,sbs-battery";
344 reg = <0xb>;
345 sbs,i2c-retry-count = <2>;
346 sbs,poll-retry-count = <10>;
347 power-supplies = <&charger>;
348 };
349 };
350 };
351 };
352
353 spi@7000da00 {
354 status = "okay";
355 spi-max-frequency = <25000000>;
356
357 flash@0 {
358 compatible = "winbond,w25q32dw";
359 spi-max-frequency = <25000000>;
360 reg = <0>;
361 };
362 };
363
364 pmc@7000e400 {
365 nvidia,invert-interrupt;
366 nvidia,suspend-mode = <0>;
367 nvidia,cpu-pwr-good-time = <500>;
368 nvidia,cpu-pwr-off-time = <300>;
369 nvidia,core-pwr-good-time = <641 3845>;
370 nvidia,core-pwr-off-time = <61036>;
371 nvidia,core-power-req-active-high;
372 nvidia,sys-clock-req-active-high;
373 };
374
375 hda@70030000 {
376 status = "okay";
377 };
378
379 usb@70090000 {
380 phys = <&{/padctl@7009f000/pads/usb2/lanes/usb2-0}>, /* 1st USB A */
381 <&{/padctl@7009f000/pads/usb2/lanes/usb2-1}>, /* Internal USB */
382 <&{/padctl@7009f000/pads/usb2/lanes/usb2-2}>, /* 2nd USB A */
383 <&{/padctl@7009f000/pads/pcie/lanes/pcie-0}>, /* 1st USB A */
384 <&{/padctl@7009f000/pads/pcie/lanes/pcie-1}>; /* 2nd USB A */
385 phy-names = "usb2-0", "usb2-1", "usb2-2", "usb3-0", "usb3-1";
386
387 avddio-pex-supply = <&vdd_1v05_run>;
388 dvddio-pex-supply = <&vdd_1v05_run>;
389 avdd-usb-supply = <&vdd_3v3_lp0>;
390 avdd-pll-utmip-supply = <&vddio_1v8>;
391 avdd-pll-erefe-supply = <&avdd_1v05_run>;
392 avdd-usb-ss-pll-supply = <&vdd_1v05_run>;
393 hvdd-usb-ss-supply = <&vdd_3v3_lp0>;
394 hvdd-usb-ss-pll-e-supply = <&vdd_3v3_lp0>;
395
396 status = "okay";
397 };
398
399 padctl@7009f000 {
400 status = "okay";
401
402 pads {
403 usb2 {
404 status = "okay";
405
406 lanes {
407 usb2-0 {
408 nvidia,function = "xusb";
409 status = "okay";
410 };
411
412 usb2-1 {
413 nvidia,function = "xusb";
414 status = "okay";
415 };
416
417 usb2-2 {
418 nvidia,function = "xusb";
419 status = "okay";
420 };
421 };
422 };
423
424 pcie {
425 status = "okay";
426
427 lanes {
428 pcie-0 {
429 nvidia,function = "usb3-ss";
430 status = "okay";
431 };
432
433 pcie-1 {
434 nvidia,function = "usb3-ss";
435 status = "okay";
436 };
437 };
438 };
439 };
440
441 ports {
442 usb2-0 {
443 vbus-supply = <&vdd_usb1_vbus>;
444 status = "okay";
445 mode = "otg";
446 };
447
448 usb2-1 {
449 vbus-supply = <&vdd_run_cam>;
450 status = "okay";
451 mode = "host";
452 };
453
454 usb2-2 {
455 vbus-supply = <&vdd_usb3_vbus>;
456 status = "okay";
457 mode = "host";
458 };
459
460 usb3-0 {
461 nvidia,usb2-companion = <0>;
462 status = "okay";
463 };
464
465 usb3-1 {
466 nvidia,usb2-companion = <1>;
467 status = "okay";
468 };
469 };
470 };
471
472 sdhci0_pwrseq: sdhci0_pwrseq {
473 compatible = "mmc-pwrseq-simple";
474
475 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
476 };
477
478 sdhci@700b0000 { /* WiFi/BT on this bus */
479 status = "okay";
480 bus-width = <4>;
481 no-1-8-v;
482 non-removable;
483 mmc-pwrseq = <&sdhci0_pwrseq>;
484 vmmc-supply = <&vdd_3v3_lp0>;
485 vqmmc-supply = <&vddio_1v8>;
486 keep-power-in-suspend;
487 };
488
489 sdhci@700b0400 { /* SD Card on this bus */
490 status = "okay";
491 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
492 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
493 bus-width = <4>;
494 no-1-8-v;
495 vqmmc-supply = <&vddio_sdmmc3>;
496 };
497
498 sdhci@700b0600 { /* eMMC on this bus */
499 status = "okay";
500 bus-width = <8>;
501 no-1-8-v;
502 non-removable;
503 };
504
505 /* CPU DFLL clock */
506 clock@70110000 {
507 status = "disabled";
508 vdd-cpu-supply = <&vdd_cpu>;
509 nvidia,i2c-fs-rate = <400000>;
510 };
511
512 ahub@70300000 {
513 i2s@70301100 {
514 status = "okay";
515 };
516 };
517
518 backlight: backlight {
519 compatible = "pwm-backlight";
520
521 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
522 power-supply = <&vdd_led>;
523 pwms = <&pwm 1 1000000>;
524
525 default-brightness-level = <224>;
526 brightness-levels =
527 < 0 1 2 3 4 5 6 7
528 8 9 10 11 12 13 14 15
529 16 17 18 19 20 21 22 23
530 24 25 26 27 28 29 30 31
531 32 33 34 35 36 37 38 39
532 40 41 42 43 44 45 46 47
533 48 49 50 51 52 53 54 55
534 56 57 58 59 60 61 62 63
535 64 65 66 67 68 69 70 71
536 72 73 74 75 76 77 78 79
537 80 81 82 83 84 85 86 87
538 88 89 90 91 92 93 94 95
539 96 97 98 99 100 101 102 103
540 104 105 106 107 108 109 110 111
541 112 113 114 115 116 117 118 119
542 120 121 122 123 124 125 126 127
543 128 129 130 131 132 133 134 135
544 136 137 138 139 140 141 142 143
545 144 145 146 147 148 149 150 151
546 152 153 154 155 156 157 158 159
547 160 161 162 163 164 165 166 167
548 168 169 170 171 172 173 174 175
549 176 177 178 179 180 181 182 183
550 184 185 186 187 188 189 190 191
551 192 193 194 195 196 197 198 199
552 200 201 202 203 204 205 206 207
553 208 209 210 211 212 213 214 215
554 216 217 218 219 220 221 222 223
555 224 225 226 227 228 229 230 231
556 232 233 234 235 236 237 238 239
557 240 241 242 243 244 245 246 247
558 248 249 250 251 252 253 254 255
559 256>;
560 };
561
562 clocks {
563 compatible = "simple-bus";
564 #address-cells = <1>;
565 #size-cells = <0>;
566
567 clk32k_in: clock@0 {
568 compatible = "fixed-clock";
569 reg = <0>;
570 #clock-cells = <0>;
571 clock-frequency = <32768>;
572 };
573 };
574
575 cpus {
576 cpu@0 {
577 vdd-cpu-supply = <&vdd_cpu>;
578 };
579 };
580
581 gpio-keys {
582 compatible = "gpio-keys";
583
584 lid {
585 label = "Lid";
586 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
587 linux,input-type = <5>;
588 linux,code = <KEY_RESERVED>;
589 debounce-interval = <1>;
590 wakeup-source;
591 };
592
593 power {
594 label = "Power";
595 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
596 linux,code = <KEY_POWER>;
597 debounce-interval = <30>;
598 wakeup-source;
599 };
600 };
601
602 regulators {
603 compatible = "simple-bus";
604 #address-cells = <1>;
605 #size-cells = <0>;
606
607 vdd_mux: regulator@0 {
608 compatible = "regulator-fixed";
609 reg = <0>;
610 regulator-name = "+VDD_MUX";
611 regulator-min-microvolt = <12000000>;
612 regulator-max-microvolt = <12000000>;
613 regulator-always-on;
614 regulator-boot-on;
615 };
616
617 vdd_5v0_sys: regulator@1 {
618 compatible = "regulator-fixed";
619 reg = <1>;
620 regulator-name = "+5V_SYS";
621 regulator-min-microvolt = <5000000>;
622 regulator-max-microvolt = <5000000>;
623 regulator-always-on;
624 regulator-boot-on;
625 vin-supply = <&vdd_mux>;
626 };
627
628 vdd_3v3_sys: regulator@2 {
629 compatible = "regulator-fixed";
630 reg = <2>;
631 regulator-name = "+3.3V_SYS";
632 regulator-min-microvolt = <3300000>;
633 regulator-max-microvolt = <3300000>;
634 regulator-always-on;
635 regulator-boot-on;
636 vin-supply = <&vdd_mux>;
637 };
638
639 vdd_3v3_run: regulator@3 {
640 compatible = "regulator-fixed";
641 reg = <3>;
642 regulator-name = "+3.3V_RUN";
643 regulator-min-microvolt = <3300000>;
644 regulator-max-microvolt = <3300000>;
645 regulator-always-on;
646 regulator-boot-on;
647 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
648 enable-active-high;
649 vin-supply = <&vdd_3v3_sys>;
650 };
651
652 vdd_3v3_hdmi: regulator@4 {
653 compatible = "regulator-fixed";
654 reg = <4>;
655 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
656 regulator-min-microvolt = <3300000>;
657 regulator-max-microvolt = <3300000>;
658 vin-supply = <&vdd_3v3_run>;
659 };
660
661 vdd_led: regulator@5 {
662 compatible = "regulator-fixed";
663 reg = <5>;
664 regulator-name = "+VDD_LED";
665 gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
666 enable-active-high;
667 vin-supply = <&vdd_mux>;
668 };
669
670 vdd_5v0_ts: regulator@6 {
671 compatible = "regulator-fixed";
672 reg = <6>;
673 regulator-name = "+5V_VDD_TS_SW";
674 regulator-min-microvolt = <5000000>;
675 regulator-max-microvolt = <5000000>;
676 regulator-boot-on;
677 gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
678 enable-active-high;
679 vin-supply = <&vdd_5v0_sys>;
680 };
681
682 vdd_usb1_vbus: regulator@7 {
683 compatible = "regulator-fixed";
684 reg = <7>;
685 regulator-name = "+5V_USB_HS";
686 regulator-min-microvolt = <5000000>;
687 regulator-max-microvolt = <5000000>;
688 gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
689 enable-active-high;
690 gpio-open-drain;
691 vin-supply = <&vdd_5v0_sys>;
692 };
693
694 vdd_usb3_vbus: regulator@8 {
695 compatible = "regulator-fixed";
696 reg = <8>;
697 regulator-name = "+5V_USB_SS";
698 regulator-min-microvolt = <5000000>;
699 regulator-max-microvolt = <5000000>;
700 gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
701 enable-active-high;
702 gpio-open-drain;
703 vin-supply = <&vdd_5v0_sys>;
704 };
705
706 vdd_3v3_panel: regulator@9 {
707 compatible = "regulator-fixed";
708 reg = <9>;
709 regulator-name = "+3.3V_PANEL";
710 regulator-min-microvolt = <3300000>;
711 regulator-max-microvolt = <3300000>;
712 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
713 enable-active-high;
714 vin-supply = <&vdd_3v3_run>;
715 };
716
717 vdd_3v3_lp0: regulator@10 {
718 compatible = "regulator-fixed";
719 reg = <10>;
720 regulator-name = "+3.3V_LP0";
721 regulator-min-microvolt = <3300000>;
722 regulator-max-microvolt = <3300000>;
723 /*
724 * TODO: find a way to wire this up with the USB EHCI
725 * controllers so that it can be enabled on demand.
726 */
727 regulator-always-on;
728 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
729 enable-active-high;
730 vin-supply = <&vdd_3v3_sys>;
731 };
732
733 vdd_hdmi_pll: regulator@11 {
734 compatible = "regulator-fixed";
735 reg = <11>;
736 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
737 regulator-min-microvolt = <1050000>;
738 regulator-max-microvolt = <1050000>;
739 gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
740 vin-supply = <&vdd_1v05_run>;
741 };
742
743 vdd_5v0_hdmi: regulator@12 {
744 compatible = "regulator-fixed";
745 reg = <12>;
746 regulator-name = "+5V_HDMI_CON";
747 regulator-min-microvolt = <5000000>;
748 regulator-max-microvolt = <5000000>;
749 gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
750 enable-active-high;
751 vin-supply = <&vdd_5v0_sys>;
752 };
753 };
754
755 sound {
756 nvidia,audio-routing =
757 "Headphones", "HPR",
758 "Headphones", "HPL",
759 "Speakers", "SPKR",
760 "Speakers", "SPKL",
761 "Mic Jack", "MICBIAS",
762 "DMICL", "Int Mic",
763 "DMICR", "Int Mic",
764 "IN34", "Mic Jack";
765
766 nvidia,i2s-controller = <&tegra_i2s1>;
767 nvidia,audio-codec = <&acodec>;
768
769 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
770 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
771 <&tegra_car TEGRA124_CLK_EXTERN1>;
772 clock-names = "pll_a", "pll_a_out0", "mclk";
773
774 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
775 nvidia,mic-det-gpios =
776 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
777 };
778
779 gpio-restart {
780 compatible = "gpio-restart";
781 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
782 priority = <200>;
783 };
784};
785
786#include "cros-ec-keyboard.dtsi"
1#include <dt-bindings/input/input.h>
2#include "tegra124.dtsi"
3
4/ {
5 aliases {
6 rtc0 = "/i2c@0,7000d000/pmic@40";
7 rtc1 = "/rtc@0,7000e000";
8 serial0 = &uarta;
9 };
10
11 memory {
12 reg = <0x0 0x80000000 0x0 0x80000000>;
13 };
14
15 host1x@0,50000000 {
16 hdmi@0,54280000 {
17 status = "okay";
18
19 vdd-supply = <&vdd_3v3_hdmi>;
20 pll-supply = <&vdd_hdmi_pll>;
21 hdmi-supply = <&vdd_5v0_hdmi>;
22
23 nvidia,ddc-i2c-bus = <&hdmi_ddc>;
24 nvidia,hpd-gpio =
25 <&gpio TEGRA_GPIO(N, 7) GPIO_ACTIVE_HIGH>;
26 };
27
28 sor@0,54540000 {
29 status = "okay";
30
31 nvidia,dpaux = <&dpaux>;
32 nvidia,panel = <&panel>;
33 };
34
35 dpaux@0,545c0000 {
36 vdd-supply = <&vdd_3v3_panel>;
37 status = "okay";
38 };
39 };
40
41 serial@0,70006000 {
42 /* Debug connector on the bottom of the board near SD card. */
43 status = "okay";
44 };
45
46 pwm@0,7000a000 {
47 status = "okay";
48 };
49
50 i2c@0,7000c000 {
51 status = "okay";
52 clock-frequency = <100000>;
53
54 acodec: audio-codec@10 {
55 compatible = "maxim,max98090";
56 reg = <0x10>;
57 interrupt-parent = <&gpio>;
58 interrupts = <TEGRA_GPIO(H, 4) GPIO_ACTIVE_HIGH>;
59 };
60
61 temperature-sensor@4c {
62 compatible = "ti,tmp451";
63 reg = <0x4c>;
64 interrupt-parent = <&gpio>;
65 interrupts = <TEGRA_GPIO(I, 6) IRQ_TYPE_LEVEL_LOW>;
66
67 #thermal-sensor-cells = <1>;
68 };
69 };
70
71 i2c@0,7000c400 {
72 status = "okay";
73 clock-frequency = <100000>;
74
75 trackpad@15 {
76 compatible = "elan,ekth3000";
77 reg = <0x15>;
78 interrupt-parent = <&gpio>;
79 interrupts = <TEGRA_GPIO(W, 3) IRQ_TYPE_EDGE_FALLING>;
80 wakeup-source;
81 };
82 };
83
84 i2c@0,7000c500 {
85 status = "okay";
86 clock-frequency = <400000>;
87
88 tpm@20 {
89 compatible = "infineon,slb9645tt";
90 reg = <0x20>;
91 };
92 };
93
94 hdmi_ddc: i2c@0,7000c700 {
95 status = "okay";
96 clock-frequency = <100000>;
97 };
98
99 i2c@0,7000d000 {
100 status = "okay";
101 clock-frequency = <400000>;
102
103 pmic: pmic@40 {
104 compatible = "ams,as3722";
105 reg = <0x40>;
106 interrupts = <0 86 IRQ_TYPE_LEVEL_HIGH>;
107
108 ams,system-power-controller;
109
110 #interrupt-cells = <2>;
111 interrupt-controller;
112
113 gpio-controller;
114 #gpio-cells = <2>;
115
116 pinctrl-names = "default";
117 pinctrl-0 = <&as3722_default>;
118
119 as3722_default: pinmux {
120 gpio0 {
121 pins = "gpio0";
122 function = "gpio";
123 bias-pull-down;
124 };
125
126 gpio1 {
127 pins = "gpio1";
128 function = "gpio";
129 bias-pull-up;
130 };
131
132 gpio2_4_7 {
133 pins = "gpio2", "gpio4", "gpio7";
134 function = "gpio";
135 bias-pull-up;
136 };
137
138 gpio3_6 {
139 pins = "gpio3", "gpio6";
140 bias-high-impedance;
141 };
142
143 gpio5 {
144 pins = "gpio5";
145 function = "clk32k-out";
146 bias-pull-down;
147 };
148 };
149
150 regulators {
151 vsup-sd2-supply = <&vdd_5v0_sys>;
152 vsup-sd3-supply = <&vdd_5v0_sys>;
153 vsup-sd4-supply = <&vdd_5v0_sys>;
154 vsup-sd5-supply = <&vdd_5v0_sys>;
155 vin-ldo0-supply = <&vdd_1v35_lp0>;
156 vin-ldo1-6-supply = <&vdd_3v3_run>;
157 vin-ldo2-5-7-supply = <&vddio_1v8>;
158 vin-ldo3-4-supply = <&vdd_3v3_sys>;
159 vin-ldo9-10-supply = <&vdd_5v0_sys>;
160 vin-ldo11-supply = <&vdd_3v3_run>;
161
162 vdd_cpu: sd0 {
163 regulator-name = "+VDD_CPU_AP";
164 regulator-min-microvolt = <700000>;
165 regulator-max-microvolt = <1350000>;
166 regulator-min-microamp = <3500000>;
167 regulator-max-microamp = <3500000>;
168 regulator-always-on;
169 regulator-boot-on;
170 ams,ext-control = <2>;
171 };
172
173 sd1 {
174 regulator-name = "+VDD_CORE";
175 regulator-min-microvolt = <700000>;
176 regulator-max-microvolt = <1350000>;
177 regulator-min-microamp = <2500000>;
178 regulator-max-microamp = <4000000>;
179 regulator-always-on;
180 regulator-boot-on;
181 ams,ext-control = <1>;
182 };
183
184 vdd_1v35_lp0: sd2 {
185 regulator-name = "+1.35V_LP0(sd2)";
186 regulator-min-microvolt = <1350000>;
187 regulator-max-microvolt = <1350000>;
188 regulator-always-on;
189 regulator-boot-on;
190 };
191
192 sd3 {
193 regulator-name = "+1.35V_LP0(sd3)";
194 regulator-min-microvolt = <1350000>;
195 regulator-max-microvolt = <1350000>;
196 regulator-always-on;
197 regulator-boot-on;
198 };
199
200 vdd_1v05_run: sd4 {
201 regulator-name = "+1.05V_RUN";
202 regulator-min-microvolt = <1050000>;
203 regulator-max-microvolt = <1050000>;
204 };
205
206 vddio_1v8: sd5 {
207 regulator-name = "+1.8V_VDDIO";
208 regulator-min-microvolt = <1800000>;
209 regulator-max-microvolt = <1800000>;
210 regulator-always-on;
211 };
212
213 sd6 {
214 regulator-name = "+VDD_GPU_AP";
215 regulator-min-microvolt = <650000>;
216 regulator-max-microvolt = <1200000>;
217 regulator-min-microamp = <3500000>;
218 regulator-max-microamp = <3500000>;
219 regulator-boot-on;
220 regulator-always-on;
221 };
222
223 ldo0 {
224 regulator-name = "+1.05V_RUN_AVDD";
225 regulator-min-microvolt = <1050000>;
226 regulator-max-microvolt = <1050000>;
227 regulator-boot-on;
228 regulator-always-on;
229 ams,ext-control = <1>;
230 };
231
232 ldo1 {
233 regulator-name = "+1.8V_RUN_CAM";
234 regulator-min-microvolt = <1800000>;
235 regulator-max-microvolt = <1800000>;
236 };
237
238 ldo2 {
239 regulator-name = "+1.2V_GEN_AVDD";
240 regulator-min-microvolt = <1200000>;
241 regulator-max-microvolt = <1200000>;
242 regulator-boot-on;
243 regulator-always-on;
244 };
245
246 ldo3 {
247 regulator-name = "+1.00V_LP0_VDD_RTC";
248 regulator-min-microvolt = <1000000>;
249 regulator-max-microvolt = <1000000>;
250 regulator-boot-on;
251 regulator-always-on;
252 ams,enable-tracking;
253 };
254
255 vdd_run_cam: ldo4 {
256 regulator-name = "+3.3V_RUN_CAM";
257 regulator-min-microvolt = <2800000>;
258 regulator-max-microvolt = <2800000>;
259 };
260
261 ldo5 {
262 regulator-name = "+1.2V_RUN_CAM_FRONT";
263 regulator-min-microvolt = <1200000>;
264 regulator-max-microvolt = <1200000>;
265 };
266
267 vddio_sdmmc3: ldo6 {
268 regulator-name = "+VDDIO_SDMMC3";
269 regulator-min-microvolt = <1800000>;
270 regulator-max-microvolt = <3300000>;
271 };
272
273 ldo7 {
274 regulator-name = "+1.05V_RUN_CAM_REAR";
275 regulator-min-microvolt = <1050000>;
276 regulator-max-microvolt = <1050000>;
277 };
278
279 ldo9 {
280 regulator-name = "+2.8V_RUN_TOUCH";
281 regulator-min-microvolt = <2800000>;
282 regulator-max-microvolt = <2800000>;
283 };
284
285 ldo10 {
286 regulator-name = "+2.8V_RUN_CAM_AF";
287 regulator-min-microvolt = <2800000>;
288 regulator-max-microvolt = <2800000>;
289 };
290
291 ldo11 {
292 regulator-name = "+1.8V_RUN_VPP_FUSE";
293 regulator-min-microvolt = <1800000>;
294 regulator-max-microvolt = <1800000>;
295 };
296 };
297 };
298 };
299
300 spi@0,7000d400 {
301 status = "okay";
302
303 cros_ec: cros-ec@0 {
304 compatible = "google,cros-ec-spi";
305 spi-max-frequency = <3000000>;
306 interrupt-parent = <&gpio>;
307 interrupts = <TEGRA_GPIO(C, 7) IRQ_TYPE_LEVEL_LOW>;
308 reg = <0>;
309
310 google,cros-ec-spi-msg-delay = <2000>;
311
312 i2c-tunnel {
313 compatible = "google,cros-ec-i2c-tunnel";
314 #address-cells = <1>;
315 #size-cells = <0>;
316
317 google,remote-bus = <0>;
318
319 charger: bq24735@9 {
320 compatible = "ti,bq24735";
321 reg = <0x9>;
322 interrupt-parent = <&gpio>;
323 interrupts = <TEGRA_GPIO(J, 0)
324 GPIO_ACTIVE_HIGH>;
325 ti,ac-detect-gpios = <&gpio
326 TEGRA_GPIO(J, 0)
327 GPIO_ACTIVE_HIGH>;
328 };
329
330 battery: sbs-battery@b {
331 compatible = "sbs,sbs-battery";
332 reg = <0xb>;
333 sbs,i2c-retry-count = <2>;
334 sbs,poll-retry-count = <10>;
335 power-supplies = <&charger>;
336 };
337 };
338 };
339 };
340
341 spi@0,7000da00 {
342 status = "okay";
343 spi-max-frequency = <25000000>;
344
345 flash@0 {
346 compatible = "winbond,w25q32dw";
347 spi-max-frequency = <25000000>;
348 reg = <0>;
349 };
350 };
351
352 pmc@0,7000e400 {
353 nvidia,invert-interrupt;
354 nvidia,suspend-mode = <0>;
355 nvidia,cpu-pwr-good-time = <500>;
356 nvidia,cpu-pwr-off-time = <300>;
357 nvidia,core-pwr-good-time = <641 3845>;
358 nvidia,core-pwr-off-time = <61036>;
359 nvidia,core-power-req-active-high;
360 nvidia,sys-clock-req-active-high;
361 };
362
363 hda@0,70030000 {
364 status = "okay";
365 };
366
367 sdhci0_pwrseq: sdhci0_pwrseq {
368 compatible = "mmc-pwrseq-simple";
369
370 reset-gpios = <&gpio TEGRA_GPIO(X, 7) GPIO_ACTIVE_LOW>;
371 };
372
373 sdhci@0,700b0000 { /* WiFi/BT on this bus */
374 status = "okay";
375 bus-width = <4>;
376 no-1-8-v;
377 non-removable;
378 mmc-pwrseq = <&sdhci0_pwrseq>;
379 vmmc-supply = <&vdd_3v3_lp0>;
380 vqmmc-supply = <&vddio_1v8>;
381 keep-power-in-suspend;
382 };
383
384 sdhci@0,700b0400 { /* SD Card on this bus */
385 status = "okay";
386 cd-gpios = <&gpio TEGRA_GPIO(V, 2) GPIO_ACTIVE_LOW>;
387 power-gpios = <&gpio TEGRA_GPIO(R, 0) GPIO_ACTIVE_HIGH>;
388 bus-width = <4>;
389 no-1-8-v;
390 vqmmc-supply = <&vddio_sdmmc3>;
391 };
392
393 sdhci@0,700b0600 { /* eMMC on this bus */
394 status = "okay";
395 bus-width = <8>;
396 no-1-8-v;
397 non-removable;
398 };
399
400 /* CPU DFLL clock */
401 clock@0,70110000 {
402 status = "disabled";
403 vdd-cpu-supply = <&vdd_cpu>;
404 nvidia,i2c-fs-rate = <400000>;
405 };
406
407 ahub@0,70300000 {
408 i2s@0,70301100 {
409 status = "okay";
410 };
411 };
412
413 usb@0,7d000000 { /* Rear external USB port. */
414 status = "okay";
415 };
416
417 usb-phy@0,7d000000 {
418 status = "okay";
419 vbus-supply = <&vdd_usb1_vbus>;
420 };
421
422 usb@0,7d004000 { /* Internal webcam. */
423 status = "okay";
424 };
425
426 usb-phy@0,7d004000 {
427 status = "okay";
428 vbus-supply = <&vdd_run_cam>;
429 };
430
431 usb@0,7d008000 { /* Left external USB port. */
432 status = "okay";
433 };
434
435 usb-phy@0,7d008000 {
436 status = "okay";
437 vbus-supply = <&vdd_usb3_vbus>;
438 };
439
440 backlight: backlight {
441 compatible = "pwm-backlight";
442
443 enable-gpios = <&gpio TEGRA_GPIO(H, 2) GPIO_ACTIVE_HIGH>;
444 power-supply = <&vdd_led>;
445 pwms = <&pwm 1 1000000>;
446
447 default-brightness-level = <224>;
448 brightness-levels =
449 < 0 1 2 3 4 5 6 7
450 8 9 10 11 12 13 14 15
451 16 17 18 19 20 21 22 23
452 24 25 26 27 28 29 30 31
453 32 33 34 35 36 37 38 39
454 40 41 42 43 44 45 46 47
455 48 49 50 51 52 53 54 55
456 56 57 58 59 60 61 62 63
457 64 65 66 67 68 69 70 71
458 72 73 74 75 76 77 78 79
459 80 81 82 83 84 85 86 87
460 88 89 90 91 92 93 94 95
461 96 97 98 99 100 101 102 103
462 104 105 106 107 108 109 110 111
463 112 113 114 115 116 117 118 119
464 120 121 122 123 124 125 126 127
465 128 129 130 131 132 133 134 135
466 136 137 138 139 140 141 142 143
467 144 145 146 147 148 149 150 151
468 152 153 154 155 156 157 158 159
469 160 161 162 163 164 165 166 167
470 168 169 170 171 172 173 174 175
471 176 177 178 179 180 181 182 183
472 184 185 186 187 188 189 190 191
473 192 193 194 195 196 197 198 199
474 200 201 202 203 204 205 206 207
475 208 209 210 211 212 213 214 215
476 216 217 218 219 220 221 222 223
477 224 225 226 227 228 229 230 231
478 232 233 234 235 236 237 238 239
479 240 241 242 243 244 245 246 247
480 248 249 250 251 252 253 254 255
481 256>;
482 };
483
484 clocks {
485 compatible = "simple-bus";
486 #address-cells = <1>;
487 #size-cells = <0>;
488
489 clk32k_in: clock@0 {
490 compatible = "fixed-clock";
491 reg = <0>;
492 #clock-cells = <0>;
493 clock-frequency = <32768>;
494 };
495 };
496
497 cpus {
498 cpu@0 {
499 vdd-cpu-supply = <&vdd_cpu>;
500 };
501 };
502
503 gpio-keys {
504 compatible = "gpio-keys";
505
506 lid {
507 label = "Lid";
508 gpios = <&gpio TEGRA_GPIO(R, 4) GPIO_ACTIVE_LOW>;
509 linux,input-type = <5>;
510 linux,code = <KEY_RESERVED>;
511 debounce-interval = <1>;
512 gpio-key,wakeup;
513 };
514
515 power {
516 label = "Power";
517 gpios = <&gpio TEGRA_GPIO(Q, 0) GPIO_ACTIVE_LOW>;
518 linux,code = <KEY_POWER>;
519 debounce-interval = <30>;
520 gpio-key,wakeup;
521 };
522 };
523
524 regulators {
525 compatible = "simple-bus";
526 #address-cells = <1>;
527 #size-cells = <0>;
528
529 vdd_mux: regulator@0 {
530 compatible = "regulator-fixed";
531 reg = <0>;
532 regulator-name = "+VDD_MUX";
533 regulator-min-microvolt = <12000000>;
534 regulator-max-microvolt = <12000000>;
535 regulator-always-on;
536 regulator-boot-on;
537 };
538
539 vdd_5v0_sys: regulator@1 {
540 compatible = "regulator-fixed";
541 reg = <1>;
542 regulator-name = "+5V_SYS";
543 regulator-min-microvolt = <5000000>;
544 regulator-max-microvolt = <5000000>;
545 regulator-always-on;
546 regulator-boot-on;
547 vin-supply = <&vdd_mux>;
548 };
549
550 vdd_3v3_sys: regulator@2 {
551 compatible = "regulator-fixed";
552 reg = <2>;
553 regulator-name = "+3.3V_SYS";
554 regulator-min-microvolt = <3300000>;
555 regulator-max-microvolt = <3300000>;
556 regulator-always-on;
557 regulator-boot-on;
558 vin-supply = <&vdd_mux>;
559 };
560
561 vdd_3v3_run: regulator@3 {
562 compatible = "regulator-fixed";
563 reg = <3>;
564 regulator-name = "+3.3V_RUN";
565 regulator-min-microvolt = <3300000>;
566 regulator-max-microvolt = <3300000>;
567 regulator-always-on;
568 regulator-boot-on;
569 gpio = <&pmic 1 GPIO_ACTIVE_HIGH>;
570 enable-active-high;
571 vin-supply = <&vdd_3v3_sys>;
572 };
573
574 vdd_3v3_hdmi: regulator@4 {
575 compatible = "regulator-fixed";
576 reg = <4>;
577 regulator-name = "+3.3V_AVDD_HDMI_AP_GATED";
578 regulator-min-microvolt = <3300000>;
579 regulator-max-microvolt = <3300000>;
580 vin-supply = <&vdd_3v3_run>;
581 };
582
583 vdd_led: regulator@5 {
584 compatible = "regulator-fixed";
585 reg = <5>;
586 regulator-name = "+VDD_LED";
587 gpio = <&gpio TEGRA_GPIO(P, 2) GPIO_ACTIVE_HIGH>;
588 enable-active-high;
589 vin-supply = <&vdd_mux>;
590 };
591
592 vdd_5v0_ts: regulator@6 {
593 compatible = "regulator-fixed";
594 reg = <6>;
595 regulator-name = "+5V_VDD_TS_SW";
596 regulator-min-microvolt = <5000000>;
597 regulator-max-microvolt = <5000000>;
598 regulator-boot-on;
599 gpio = <&gpio TEGRA_GPIO(K, 1) GPIO_ACTIVE_HIGH>;
600 enable-active-high;
601 vin-supply = <&vdd_5v0_sys>;
602 };
603
604 vdd_usb1_vbus: regulator@7 {
605 compatible = "regulator-fixed";
606 reg = <7>;
607 regulator-name = "+5V_USB_HS";
608 regulator-min-microvolt = <5000000>;
609 regulator-max-microvolt = <5000000>;
610 gpio = <&gpio TEGRA_GPIO(N, 4) GPIO_ACTIVE_HIGH>;
611 enable-active-high;
612 gpio-open-drain;
613 vin-supply = <&vdd_5v0_sys>;
614 };
615
616 vdd_usb3_vbus: regulator@8 {
617 compatible = "regulator-fixed";
618 reg = <8>;
619 regulator-name = "+5V_USB_SS";
620 regulator-min-microvolt = <5000000>;
621 regulator-max-microvolt = <5000000>;
622 gpio = <&gpio TEGRA_GPIO(N, 5) GPIO_ACTIVE_HIGH>;
623 enable-active-high;
624 gpio-open-drain;
625 vin-supply = <&vdd_5v0_sys>;
626 };
627
628 vdd_3v3_panel: regulator@9 {
629 compatible = "regulator-fixed";
630 reg = <9>;
631 regulator-name = "+3.3V_PANEL";
632 regulator-min-microvolt = <3300000>;
633 regulator-max-microvolt = <3300000>;
634 gpio = <&pmic 4 GPIO_ACTIVE_HIGH>;
635 enable-active-high;
636 vin-supply = <&vdd_3v3_run>;
637 };
638
639 vdd_3v3_lp0: regulator@10 {
640 compatible = "regulator-fixed";
641 reg = <10>;
642 regulator-name = "+3.3V_LP0";
643 regulator-min-microvolt = <3300000>;
644 regulator-max-microvolt = <3300000>;
645 /*
646 * TODO: find a way to wire this up with the USB EHCI
647 * controllers so that it can be enabled on demand.
648 */
649 regulator-always-on;
650 gpio = <&pmic 2 GPIO_ACTIVE_HIGH>;
651 enable-active-high;
652 vin-supply = <&vdd_3v3_sys>;
653 };
654
655 vdd_hdmi_pll: regulator@11 {
656 compatible = "regulator-fixed";
657 reg = <11>;
658 regulator-name = "+1.05V_RUN_AVDD_HDMI_PLL";
659 regulator-min-microvolt = <1050000>;
660 regulator-max-microvolt = <1050000>;
661 gpio = <&gpio TEGRA_GPIO(H, 7) GPIO_ACTIVE_LOW>;
662 vin-supply = <&vdd_1v05_run>;
663 };
664
665 vdd_5v0_hdmi: regulator@12 {
666 compatible = "regulator-fixed";
667 reg = <12>;
668 regulator-name = "+5V_HDMI_CON";
669 regulator-min-microvolt = <5000000>;
670 regulator-max-microvolt = <5000000>;
671 gpio = <&gpio TEGRA_GPIO(K, 6) GPIO_ACTIVE_HIGH>;
672 enable-active-high;
673 vin-supply = <&vdd_5v0_sys>;
674 };
675 };
676
677 sound {
678 nvidia,audio-routing =
679 "Headphones", "HPR",
680 "Headphones", "HPL",
681 "Speakers", "SPKR",
682 "Speakers", "SPKL",
683 "Mic Jack", "MICBIAS",
684 "DMICL", "Int Mic",
685 "DMICR", "Int Mic",
686 "IN34", "Mic Jack";
687
688 nvidia,i2s-controller = <&tegra_i2s1>;
689 nvidia,audio-codec = <&acodec>;
690
691 clocks = <&tegra_car TEGRA124_CLK_PLL_A>,
692 <&tegra_car TEGRA124_CLK_PLL_A_OUT0>,
693 <&tegra_car TEGRA124_CLK_EXTERN1>;
694 clock-names = "pll_a", "pll_a_out0", "mclk";
695
696 nvidia,hp-det-gpios = <&gpio TEGRA_GPIO(I, 7) GPIO_ACTIVE_HIGH>;
697 nvidia,mic-det-gpios =
698 <&gpio TEGRA_GPIO(R, 7) GPIO_ACTIVE_HIGH>;
699 };
700
701 gpio-restart {
702 compatible = "gpio-restart";
703 gpios = <&gpio TEGRA_GPIO(I, 5) GPIO_ACTIVE_LOW>;
704 priority = <200>;
705 };
706};
707
708#include "cros-ec-keyboard.dtsi"