Loading...
1/*
2 * Copyright (c) 2013 MundoReader S.L.
3 * Author: Heiko Stuebner <heiko@sntech.de>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44#include <dt-bindings/interrupt-controller/irq.h>
45#include <dt-bindings/interrupt-controller/arm-gic.h>
46#include <dt-bindings/soc/rockchip,boot-mode.h>
47
48/ {
49 #address-cells = <1>;
50 #size-cells = <1>;
51
52 interrupt-parent = <&gic>;
53
54 aliases {
55 ethernet0 = &emac;
56 i2c0 = &i2c0;
57 i2c1 = &i2c1;
58 i2c2 = &i2c2;
59 i2c3 = &i2c3;
60 i2c4 = &i2c4;
61 mshc0 = &emmc;
62 mshc1 = &mmc0;
63 mshc2 = &mmc1;
64 serial0 = &uart0;
65 serial1 = &uart1;
66 serial2 = &uart2;
67 serial3 = &uart3;
68 spi0 = &spi0;
69 spi1 = &spi1;
70 };
71
72 amba {
73 compatible = "simple-bus";
74 #address-cells = <1>;
75 #size-cells = <1>;
76 ranges;
77
78 dmac1_s: dma-controller@20018000 {
79 compatible = "arm,pl330", "arm,primecell";
80 reg = <0x20018000 0x4000>;
81 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
82 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
83 #dma-cells = <1>;
84 arm,pl330-broken-no-flushp;
85 clocks = <&cru ACLK_DMA1>;
86 clock-names = "apb_pclk";
87 };
88
89 dmac1_ns: dma-controller@2001c000 {
90 compatible = "arm,pl330", "arm,primecell";
91 reg = <0x2001c000 0x4000>;
92 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
93 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
94 #dma-cells = <1>;
95 arm,pl330-broken-no-flushp;
96 clocks = <&cru ACLK_DMA1>;
97 clock-names = "apb_pclk";
98 status = "disabled";
99 };
100
101 dmac2: dma-controller@20078000 {
102 compatible = "arm,pl330", "arm,primecell";
103 reg = <0x20078000 0x4000>;
104 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
105 <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
106 #dma-cells = <1>;
107 arm,pl330-broken-no-flushp;
108 clocks = <&cru ACLK_DMA2>;
109 clock-names = "apb_pclk";
110 };
111 };
112
113 xin24m: oscillator {
114 compatible = "fixed-clock";
115 clock-frequency = <24000000>;
116 #clock-cells = <0>;
117 clock-output-names = "xin24m";
118 };
119
120 gpu: gpu@10090000 {
121 compatible = "arm,mali-400";
122 reg = <0x10090000 0x10000>;
123 clocks = <&cru ACLK_GPU>, <&cru ACLK_GPU>;
124 clock-names = "core", "bus";
125 assigned-clocks = <&cru ACLK_GPU>;
126 assigned-clock-rates = <100000000>;
127 resets = <&cru SRST_GPU>;
128 status = "disabled";
129 };
130
131 L2: l2-cache-controller@10138000 {
132 compatible = "arm,pl310-cache";
133 reg = <0x10138000 0x1000>;
134 cache-unified;
135 cache-level = <2>;
136 };
137
138 scu@1013c000 {
139 compatible = "arm,cortex-a9-scu";
140 reg = <0x1013c000 0x100>;
141 };
142
143 global_timer: global-timer@1013c200 {
144 compatible = "arm,cortex-a9-global-timer";
145 reg = <0x1013c200 0x20>;
146 interrupts = <GIC_PPI 11 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
147 clocks = <&cru CORE_PERI>;
148 };
149
150 local_timer: local-timer@1013c600 {
151 compatible = "arm,cortex-a9-twd-timer";
152 reg = <0x1013c600 0x20>;
153 interrupts = <GIC_PPI 13 (GIC_CPU_MASK_SIMPLE(2) | IRQ_TYPE_EDGE_RISING)>;
154 clocks = <&cru CORE_PERI>;
155 };
156
157 gic: interrupt-controller@1013d000 {
158 compatible = "arm,cortex-a9-gic";
159 interrupt-controller;
160 #interrupt-cells = <3>;
161 reg = <0x1013d000 0x1000>,
162 <0x1013c100 0x0100>;
163 };
164
165 uart0: serial@10124000 {
166 compatible = "snps,dw-apb-uart";
167 reg = <0x10124000 0x400>;
168 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
169 reg-shift = <2>;
170 reg-io-width = <1>;
171 clock-names = "baudclk", "apb_pclk";
172 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
173 status = "disabled";
174 };
175
176 uart1: serial@10126000 {
177 compatible = "snps,dw-apb-uart";
178 reg = <0x10126000 0x400>;
179 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
180 reg-shift = <2>;
181 reg-io-width = <1>;
182 clock-names = "baudclk", "apb_pclk";
183 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
184 status = "disabled";
185 };
186
187 usb_otg: usb@10180000 {
188 compatible = "rockchip,rk3066-usb", "snps,dwc2";
189 reg = <0x10180000 0x40000>;
190 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
191 clocks = <&cru HCLK_OTG0>;
192 clock-names = "otg";
193 dr_mode = "otg";
194 g-np-tx-fifo-size = <16>;
195 g-rx-fifo-size = <275>;
196 g-tx-fifo-size = <256 128 128 64 64 32>;
197 phys = <&usbphy0>;
198 phy-names = "usb2-phy";
199 status = "disabled";
200 };
201
202 usb_host: usb@101c0000 {
203 compatible = "snps,dwc2";
204 reg = <0x101c0000 0x40000>;
205 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
206 clocks = <&cru HCLK_OTG1>;
207 clock-names = "otg";
208 dr_mode = "host";
209 phys = <&usbphy1>;
210 phy-names = "usb2-phy";
211 status = "disabled";
212 };
213
214 emac: ethernet@10204000 {
215 compatible = "snps,arc-emac";
216 reg = <0x10204000 0x3c>;
217 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
218 #address-cells = <1>;
219 #size-cells = <0>;
220
221 rockchip,grf = <&grf>;
222
223 clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
224 clock-names = "hclk", "macref";
225 max-speed = <100>;
226 phy-mode = "rmii";
227
228 status = "disabled";
229 };
230
231 mmc0: dwmmc@10214000 {
232 compatible = "rockchip,rk2928-dw-mshc";
233 reg = <0x10214000 0x1000>;
234 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
235 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
236 clock-names = "biu", "ciu";
237 dmas = <&dmac2 1>;
238 dma-names = "rx-tx";
239 fifo-depth = <256>;
240 resets = <&cru SRST_SDMMC>;
241 reset-names = "reset";
242 status = "disabled";
243 };
244
245 mmc1: dwmmc@10218000 {
246 compatible = "rockchip,rk2928-dw-mshc";
247 reg = <0x10218000 0x1000>;
248 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
249 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
250 clock-names = "biu", "ciu";
251 dmas = <&dmac2 3>;
252 dma-names = "rx-tx";
253 fifo-depth = <256>;
254 resets = <&cru SRST_SDIO>;
255 reset-names = "reset";
256 status = "disabled";
257 };
258
259 emmc: dwmmc@1021c000 {
260 compatible = "rockchip,rk2928-dw-mshc";
261 reg = <0x1021c000 0x1000>;
262 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
263 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
264 clock-names = "biu", "ciu";
265 dmas = <&dmac2 4>;
266 dma-names = "rx-tx";
267 fifo-depth = <256>;
268 resets = <&cru SRST_EMMC>;
269 reset-names = "reset";
270 status = "disabled";
271 };
272
273 pmu: pmu@20004000 {
274 compatible = "rockchip,rk3066-pmu", "syscon", "simple-mfd";
275 reg = <0x20004000 0x100>;
276
277 reboot-mode {
278 compatible = "syscon-reboot-mode";
279 offset = <0x40>;
280 mode-normal = <BOOT_NORMAL>;
281 mode-recovery = <BOOT_RECOVERY>;
282 mode-bootloader = <BOOT_FASTBOOT>;
283 mode-loader = <BOOT_BL_DOWNLOAD>;
284 };
285 };
286
287 grf: grf@20008000 {
288 compatible = "syscon";
289 reg = <0x20008000 0x200>;
290 };
291
292 i2c0: i2c@2002d000 {
293 compatible = "rockchip,rk3066-i2c";
294 reg = <0x2002d000 0x1000>;
295 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
296 #address-cells = <1>;
297 #size-cells = <0>;
298
299 rockchip,grf = <&grf>;
300
301 clock-names = "i2c";
302 clocks = <&cru PCLK_I2C0>;
303
304 status = "disabled";
305 };
306
307 i2c1: i2c@2002f000 {
308 compatible = "rockchip,rk3066-i2c";
309 reg = <0x2002f000 0x1000>;
310 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
311 #address-cells = <1>;
312 #size-cells = <0>;
313
314 rockchip,grf = <&grf>;
315
316 clocks = <&cru PCLK_I2C1>;
317 clock-names = "i2c";
318
319 status = "disabled";
320 };
321
322 pwm0: pwm@20030000 {
323 compatible = "rockchip,rk2928-pwm";
324 reg = <0x20030000 0x10>;
325 #pwm-cells = <2>;
326 clocks = <&cru PCLK_PWM01>;
327 status = "disabled";
328 };
329
330 pwm1: pwm@20030010 {
331 compatible = "rockchip,rk2928-pwm";
332 reg = <0x20030010 0x10>;
333 #pwm-cells = <2>;
334 clocks = <&cru PCLK_PWM01>;
335 status = "disabled";
336 };
337
338 wdt: watchdog@2004c000 {
339 compatible = "snps,dw-wdt";
340 reg = <0x2004c000 0x100>;
341 clocks = <&cru PCLK_WDT>;
342 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
343 status = "disabled";
344 };
345
346 pwm2: pwm@20050020 {
347 compatible = "rockchip,rk2928-pwm";
348 reg = <0x20050020 0x10>;
349 #pwm-cells = <2>;
350 clocks = <&cru PCLK_PWM23>;
351 status = "disabled";
352 };
353
354 pwm3: pwm@20050030 {
355 compatible = "rockchip,rk2928-pwm";
356 reg = <0x20050030 0x10>;
357 #pwm-cells = <2>;
358 clocks = <&cru PCLK_PWM23>;
359 status = "disabled";
360 };
361
362 i2c2: i2c@20056000 {
363 compatible = "rockchip,rk3066-i2c";
364 reg = <0x20056000 0x1000>;
365 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
366 #address-cells = <1>;
367 #size-cells = <0>;
368
369 rockchip,grf = <&grf>;
370
371 clocks = <&cru PCLK_I2C2>;
372 clock-names = "i2c";
373
374 status = "disabled";
375 };
376
377 i2c3: i2c@2005a000 {
378 compatible = "rockchip,rk3066-i2c";
379 reg = <0x2005a000 0x1000>;
380 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
381 #address-cells = <1>;
382 #size-cells = <0>;
383
384 rockchip,grf = <&grf>;
385
386 clocks = <&cru PCLK_I2C3>;
387 clock-names = "i2c";
388
389 status = "disabled";
390 };
391
392 i2c4: i2c@2005e000 {
393 compatible = "rockchip,rk3066-i2c";
394 reg = <0x2005e000 0x1000>;
395 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
396 #address-cells = <1>;
397 #size-cells = <0>;
398
399 rockchip,grf = <&grf>;
400
401 clocks = <&cru PCLK_I2C4>;
402 clock-names = "i2c";
403
404 status = "disabled";
405 };
406
407 uart2: serial@20064000 {
408 compatible = "snps,dw-apb-uart";
409 reg = <0x20064000 0x400>;
410 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
411 reg-shift = <2>;
412 reg-io-width = <1>;
413 clock-names = "baudclk", "apb_pclk";
414 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
415 status = "disabled";
416 };
417
418 uart3: serial@20068000 {
419 compatible = "snps,dw-apb-uart";
420 reg = <0x20068000 0x400>;
421 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
422 reg-shift = <2>;
423 reg-io-width = <1>;
424 clock-names = "baudclk", "apb_pclk";
425 clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
426 status = "disabled";
427 };
428
429 saradc: saradc@2006c000 {
430 compatible = "rockchip,saradc";
431 reg = <0x2006c000 0x100>;
432 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
433 #io-channel-cells = <1>;
434 clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
435 clock-names = "saradc", "apb_pclk";
436 resets = <&cru SRST_SARADC>;
437 reset-names = "saradc-apb";
438 status = "disabled";
439 };
440
441 spi0: spi@20070000 {
442 compatible = "rockchip,rk3066-spi";
443 clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
444 clock-names = "spiclk", "apb_pclk";
445 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
446 reg = <0x20070000 0x1000>;
447 #address-cells = <1>;
448 #size-cells = <0>;
449 dmas = <&dmac2 10>, <&dmac2 11>;
450 dma-names = "tx", "rx";
451 status = "disabled";
452 };
453
454 spi1: spi@20074000 {
455 compatible = "rockchip,rk3066-spi";
456 clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
457 clock-names = "spiclk", "apb_pclk";
458 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
459 reg = <0x20074000 0x1000>;
460 #address-cells = <1>;
461 #size-cells = <0>;
462 dmas = <&dmac2 12>, <&dmac2 13>;
463 dma-names = "tx", "rx";
464 status = "disabled";
465 };
466};
1/*
2 * Copyright (c) 2013 MundoReader S.L.
3 * Author: Heiko Stuebner <heiko@sntech.de>
4 *
5 * This file is dual-licensed: you can use it either under the terms
6 * of the GPL or the X11 license, at your option. Note that this dual
7 * licensing only applies to this file, and not this project as a
8 * whole.
9 *
10 * a) This file is free software; you can redistribute it and/or
11 * modify it under the terms of the GNU General Public License as
12 * published by the Free Software Foundation; either version 2 of the
13 * License, or (at your option) any later version.
14 *
15 * This file is distributed in the hope that it will be useful,
16 * but WITHOUT ANY WARRANTY; without even the implied warranty of
17 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
18 * GNU General Public License for more details.
19 *
20 * Or, alternatively,
21 *
22 * b) Permission is hereby granted, free of charge, to any person
23 * obtaining a copy of this software and associated documentation
24 * files (the "Software"), to deal in the Software without
25 * restriction, including without limitation the rights to use,
26 * copy, modify, merge, publish, distribute, sublicense, and/or
27 * sell copies of the Software, and to permit persons to whom the
28 * Software is furnished to do so, subject to the following
29 * conditions:
30 *
31 * The above copyright notice and this permission notice shall be
32 * included in all copies or substantial portions of the Software.
33 *
34 * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
35 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
36 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
37 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
38 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
39 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
40 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
41 * OTHER DEALINGS IN THE SOFTWARE.
42 */
43
44#include <dt-bindings/interrupt-controller/irq.h>
45#include <dt-bindings/interrupt-controller/arm-gic.h>
46#include "skeleton.dtsi"
47
48/ {
49 interrupt-parent = <&gic>;
50
51 aliases {
52 ethernet0 = &emac;
53 i2c0 = &i2c0;
54 i2c1 = &i2c1;
55 i2c2 = &i2c2;
56 i2c3 = &i2c3;
57 i2c4 = &i2c4;
58 mshc0 = &emmc;
59 mshc1 = &mmc0;
60 mshc2 = &mmc1;
61 serial0 = &uart0;
62 serial1 = &uart1;
63 serial2 = &uart2;
64 serial3 = &uart3;
65 spi0 = &spi0;
66 spi1 = &spi1;
67 };
68
69 amba {
70 compatible = "simple-bus";
71 #address-cells = <1>;
72 #size-cells = <1>;
73 ranges;
74
75 dmac1_s: dma-controller@20018000 {
76 compatible = "arm,pl330", "arm,primecell";
77 reg = <0x20018000 0x4000>;
78 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
79 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
80 #dma-cells = <1>;
81 arm,pl330-broken-no-flushp;
82 clocks = <&cru ACLK_DMA1>;
83 clock-names = "apb_pclk";
84 };
85
86 dmac1_ns: dma-controller@2001c000 {
87 compatible = "arm,pl330", "arm,primecell";
88 reg = <0x2001c000 0x4000>;
89 interrupts = <GIC_SPI 0 IRQ_TYPE_LEVEL_HIGH>,
90 <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
91 #dma-cells = <1>;
92 arm,pl330-broken-no-flushp;
93 clocks = <&cru ACLK_DMA1>;
94 clock-names = "apb_pclk";
95 status = "disabled";
96 };
97
98 dmac2: dma-controller@20078000 {
99 compatible = "arm,pl330", "arm,primecell";
100 reg = <0x20078000 0x4000>;
101 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>,
102 <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
103 #dma-cells = <1>;
104 arm,pl330-broken-no-flushp;
105 clocks = <&cru ACLK_DMA2>;
106 clock-names = "apb_pclk";
107 };
108 };
109
110 xin24m: oscillator {
111 compatible = "fixed-clock";
112 clock-frequency = <24000000>;
113 #clock-cells = <0>;
114 clock-output-names = "xin24m";
115 };
116
117 L2: l2-cache-controller@10138000 {
118 compatible = "arm,pl310-cache";
119 reg = <0x10138000 0x1000>;
120 cache-unified;
121 cache-level = <2>;
122 };
123
124 scu@1013c000 {
125 compatible = "arm,cortex-a9-scu";
126 reg = <0x1013c000 0x100>;
127 };
128
129 global_timer: global-timer@1013c200 {
130 compatible = "arm,cortex-a9-global-timer";
131 reg = <0x1013c200 0x20>;
132 interrupts = <GIC_PPI 11 0x304>;
133 clocks = <&cru CORE_PERI>;
134 };
135
136 local_timer: local-timer@1013c600 {
137 compatible = "arm,cortex-a9-twd-timer";
138 reg = <0x1013c600 0x20>;
139 interrupts = <GIC_PPI 13 0x304>;
140 clocks = <&cru CORE_PERI>;
141 };
142
143 gic: interrupt-controller@1013d000 {
144 compatible = "arm,cortex-a9-gic";
145 interrupt-controller;
146 #interrupt-cells = <3>;
147 reg = <0x1013d000 0x1000>,
148 <0x1013c100 0x0100>;
149 };
150
151 uart0: serial@10124000 {
152 compatible = "snps,dw-apb-uart";
153 reg = <0x10124000 0x400>;
154 interrupts = <GIC_SPI 34 IRQ_TYPE_LEVEL_HIGH>;
155 reg-shift = <2>;
156 reg-io-width = <1>;
157 clock-names = "baudclk", "apb_pclk";
158 clocks = <&cru SCLK_UART0>, <&cru PCLK_UART0>;
159 status = "disabled";
160 };
161
162 uart1: serial@10126000 {
163 compatible = "snps,dw-apb-uart";
164 reg = <0x10126000 0x400>;
165 interrupts = <GIC_SPI 35 IRQ_TYPE_LEVEL_HIGH>;
166 reg-shift = <2>;
167 reg-io-width = <1>;
168 clock-names = "baudclk", "apb_pclk";
169 clocks = <&cru SCLK_UART1>, <&cru PCLK_UART1>;
170 status = "disabled";
171 };
172
173 usb_otg: usb@10180000 {
174 compatible = "rockchip,rk3066-usb", "snps,dwc2";
175 reg = <0x10180000 0x40000>;
176 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
177 clocks = <&cru HCLK_OTG0>;
178 clock-names = "otg";
179 dr_mode = "otg";
180 g-np-tx-fifo-size = <16>;
181 g-rx-fifo-size = <275>;
182 g-tx-fifo-size = <256 128 128 64 64 32>;
183 g-use-dma;
184 phys = <&usbphy0>;
185 phy-names = "usb2-phy";
186 status = "disabled";
187 };
188
189 usb_host: usb@101c0000 {
190 compatible = "snps,dwc2";
191 reg = <0x101c0000 0x40000>;
192 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
193 clocks = <&cru HCLK_OTG1>;
194 clock-names = "otg";
195 dr_mode = "host";
196 phys = <&usbphy1>;
197 phy-names = "usb2-phy";
198 status = "disabled";
199 };
200
201 emac: ethernet@10204000 {
202 compatible = "snps,arc-emac";
203 reg = <0x10204000 0x3c>;
204 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>;
205 #address-cells = <1>;
206 #size-cells = <0>;
207
208 rockchip,grf = <&grf>;
209
210 clocks = <&cru HCLK_EMAC>, <&cru SCLK_MAC>;
211 clock-names = "hclk", "macref";
212 max-speed = <100>;
213 phy-mode = "rmii";
214
215 status = "disabled";
216 };
217
218 mmc0: dwmmc@10214000 {
219 compatible = "rockchip,rk2928-dw-mshc";
220 reg = <0x10214000 0x1000>;
221 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
222 clocks = <&cru HCLK_SDMMC>, <&cru SCLK_SDMMC>;
223 clock-names = "biu", "ciu";
224 fifo-depth = <256>;
225 status = "disabled";
226 };
227
228 mmc1: dwmmc@10218000 {
229 compatible = "rockchip,rk2928-dw-mshc";
230 reg = <0x10218000 0x1000>;
231 interrupts = <GIC_SPI 24 IRQ_TYPE_LEVEL_HIGH>;
232 clocks = <&cru HCLK_SDIO>, <&cru SCLK_SDIO>;
233 clock-names = "biu", "ciu";
234 fifo-depth = <256>;
235 status = "disabled";
236 };
237
238 emmc: dwmmc@1021c000 {
239 compatible = "rockchip,rk2928-dw-mshc";
240 reg = <0x1021c000 0x1000>;
241 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
242 clocks = <&cru HCLK_EMMC>, <&cru SCLK_EMMC>;
243 clock-names = "biu", "ciu";
244 fifo-depth = <256>;
245 status = "disabled";
246 };
247
248 pmu: pmu@20004000 {
249 compatible = "rockchip,rk3066-pmu", "syscon";
250 reg = <0x20004000 0x100>;
251 };
252
253 grf: grf@20008000 {
254 compatible = "syscon";
255 reg = <0x20008000 0x200>;
256 };
257
258 i2c0: i2c@2002d000 {
259 compatible = "rockchip,rk3066-i2c";
260 reg = <0x2002d000 0x1000>;
261 interrupts = <GIC_SPI 40 IRQ_TYPE_LEVEL_HIGH>;
262 #address-cells = <1>;
263 #size-cells = <0>;
264
265 rockchip,grf = <&grf>;
266
267 clock-names = "i2c";
268 clocks = <&cru PCLK_I2C0>;
269
270 status = "disabled";
271 };
272
273 i2c1: i2c@2002f000 {
274 compatible = "rockchip,rk3066-i2c";
275 reg = <0x2002f000 0x1000>;
276 interrupts = <GIC_SPI 41 IRQ_TYPE_LEVEL_HIGH>;
277 #address-cells = <1>;
278 #size-cells = <0>;
279
280 rockchip,grf = <&grf>;
281
282 clocks = <&cru PCLK_I2C1>;
283 clock-names = "i2c";
284
285 status = "disabled";
286 };
287
288 pwm0: pwm@20030000 {
289 compatible = "rockchip,rk2928-pwm";
290 reg = <0x20030000 0x10>;
291 #pwm-cells = <2>;
292 clocks = <&cru PCLK_PWM01>;
293 status = "disabled";
294 };
295
296 pwm1: pwm@20030010 {
297 compatible = "rockchip,rk2928-pwm";
298 reg = <0x20030010 0x10>;
299 #pwm-cells = <2>;
300 clocks = <&cru PCLK_PWM01>;
301 status = "disabled";
302 };
303
304 wdt: watchdog@2004c000 {
305 compatible = "snps,dw-wdt";
306 reg = <0x2004c000 0x100>;
307 clocks = <&cru PCLK_WDT>;
308 interrupts = <GIC_SPI 51 IRQ_TYPE_LEVEL_HIGH>;
309 status = "disabled";
310 };
311
312 pwm2: pwm@20050020 {
313 compatible = "rockchip,rk2928-pwm";
314 reg = <0x20050020 0x10>;
315 #pwm-cells = <2>;
316 clocks = <&cru PCLK_PWM23>;
317 status = "disabled";
318 };
319
320 pwm3: pwm@20050030 {
321 compatible = "rockchip,rk2928-pwm";
322 reg = <0x20050030 0x10>;
323 #pwm-cells = <2>;
324 clocks = <&cru PCLK_PWM23>;
325 status = "disabled";
326 };
327
328 i2c2: i2c@20056000 {
329 compatible = "rockchip,rk3066-i2c";
330 reg = <0x20056000 0x1000>;
331 interrupts = <GIC_SPI 42 IRQ_TYPE_LEVEL_HIGH>;
332 #address-cells = <1>;
333 #size-cells = <0>;
334
335 rockchip,grf = <&grf>;
336
337 clocks = <&cru PCLK_I2C2>;
338 clock-names = "i2c";
339
340 status = "disabled";
341 };
342
343 i2c3: i2c@2005a000 {
344 compatible = "rockchip,rk3066-i2c";
345 reg = <0x2005a000 0x1000>;
346 interrupts = <GIC_SPI 43 IRQ_TYPE_LEVEL_HIGH>;
347 #address-cells = <1>;
348 #size-cells = <0>;
349
350 rockchip,grf = <&grf>;
351
352 clocks = <&cru PCLK_I2C3>;
353 clock-names = "i2c";
354
355 status = "disabled";
356 };
357
358 i2c4: i2c@2005e000 {
359 compatible = "rockchip,rk3066-i2c";
360 reg = <0x2005e000 0x1000>;
361 interrupts = <GIC_SPI 52 IRQ_TYPE_LEVEL_HIGH>;
362 #address-cells = <1>;
363 #size-cells = <0>;
364
365 rockchip,grf = <&grf>;
366
367 clocks = <&cru PCLK_I2C4>;
368 clock-names = "i2c";
369
370 status = "disabled";
371 };
372
373 uart2: serial@20064000 {
374 compatible = "snps,dw-apb-uart";
375 reg = <0x20064000 0x400>;
376 interrupts = <GIC_SPI 36 IRQ_TYPE_LEVEL_HIGH>;
377 reg-shift = <2>;
378 reg-io-width = <1>;
379 clock-names = "baudclk", "apb_pclk";
380 clocks = <&cru SCLK_UART2>, <&cru PCLK_UART2>;
381 status = "disabled";
382 };
383
384 uart3: serial@20068000 {
385 compatible = "snps,dw-apb-uart";
386 reg = <0x20068000 0x400>;
387 interrupts = <GIC_SPI 37 IRQ_TYPE_LEVEL_HIGH>;
388 reg-shift = <2>;
389 reg-io-width = <1>;
390 clock-names = "baudclk", "apb_pclk";
391 clocks = <&cru SCLK_UART3>, <&cru PCLK_UART3>;
392 status = "disabled";
393 };
394
395 saradc: saradc@2006c000 {
396 compatible = "rockchip,saradc";
397 reg = <0x2006c000 0x100>;
398 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
399 #io-channel-cells = <1>;
400 clocks = <&cru SCLK_SARADC>, <&cru PCLK_SARADC>;
401 clock-names = "saradc", "apb_pclk";
402 status = "disabled";
403 };
404
405 spi0: spi@20070000 {
406 compatible = "rockchip,rk3066-spi";
407 clocks = <&cru SCLK_SPI0>, <&cru PCLK_SPI0>;
408 clock-names = "spiclk", "apb_pclk";
409 interrupts = <GIC_SPI 38 IRQ_TYPE_LEVEL_HIGH>;
410 reg = <0x20070000 0x1000>;
411 #address-cells = <1>;
412 #size-cells = <0>;
413 dmas = <&dmac2 10>, <&dmac2 11>;
414 dma-names = "tx", "rx";
415 status = "disabled";
416 };
417
418 spi1: spi@20074000 {
419 compatible = "rockchip,rk3066-spi";
420 clocks = <&cru SCLK_SPI1>, <&cru PCLK_SPI1>;
421 clock-names = "spiclk", "apb_pclk";
422 interrupts = <GIC_SPI 39 IRQ_TYPE_LEVEL_HIGH>;
423 reg = <0x20074000 0x1000>;
424 #address-cells = <1>;
425 #size-cells = <0>;
426 dmas = <&dmac2 12>, <&dmac2 13>;
427 dma-names = "tx", "rx";
428 status = "disabled";
429 };
430};