Loading...
1// SPDX-License-Identifier: (GPL-2.0+ OR MIT)
2/*
3 * Device Tree Include file for Marvell Armada 38x family of SoCs.
4 *
5 * Copyright (C) 2014 Marvell
6 *
7 * Lior Amsalem <alior@marvell.com>
8 * Gregory CLEMENT <gregory.clement@free-electrons.com>
9 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
10 */
11
12#include "skeleton.dtsi"
13#include <dt-bindings/interrupt-controller/arm-gic.h>
14#include <dt-bindings/interrupt-controller/irq.h>
15
16#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
17
18/ {
19 model = "Marvell Armada 38x family SoC";
20 compatible = "marvell,armada380";
21
22 aliases {
23 gpio0 = &gpio0;
24 gpio1 = &gpio1;
25 serial0 = &uart0;
26 serial1 = &uart1;
27 };
28
29 pmu {
30 compatible = "arm,cortex-a9-pmu";
31 interrupts-extended = <&mpic 3>;
32 };
33
34 soc {
35 compatible = "marvell,armada380-mbus", "simple-bus";
36 #address-cells = <2>;
37 #size-cells = <1>;
38 controller = <&mbusc>;
39 interrupt-parent = <&gic>;
40 pcie-mem-aperture = <0xe0000000 0x8000000>;
41 pcie-io-aperture = <0xe8000000 0x100000>;
42
43 bootrom {
44 compatible = "marvell,bootrom";
45 reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
46 };
47
48 devbus_bootcs: devbus-bootcs {
49 compatible = "marvell,mvebu-devbus";
50 reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
51 ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
52 #address-cells = <1>;
53 #size-cells = <1>;
54 clocks = <&coreclk 0>;
55 status = "disabled";
56 };
57
58 devbus_cs0: devbus-cs0 {
59 compatible = "marvell,mvebu-devbus";
60 reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
61 ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
62 #address-cells = <1>;
63 #size-cells = <1>;
64 clocks = <&coreclk 0>;
65 status = "disabled";
66 };
67
68 devbus_cs1: devbus-cs1 {
69 compatible = "marvell,mvebu-devbus";
70 reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
71 ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
72 #address-cells = <1>;
73 #size-cells = <1>;
74 clocks = <&coreclk 0>;
75 status = "disabled";
76 };
77
78 devbus_cs2: devbus-cs2 {
79 compatible = "marvell,mvebu-devbus";
80 reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
81 ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
82 #address-cells = <1>;
83 #size-cells = <1>;
84 clocks = <&coreclk 0>;
85 status = "disabled";
86 };
87
88 devbus_cs3: devbus-cs3 {
89 compatible = "marvell,mvebu-devbus";
90 reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
91 ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
92 #address-cells = <1>;
93 #size-cells = <1>;
94 clocks = <&coreclk 0>;
95 status = "disabled";
96 };
97
98 internal-regs {
99 compatible = "simple-bus";
100 #address-cells = <1>;
101 #size-cells = <1>;
102 ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
103
104 L2: cache-controller@8000 {
105 compatible = "arm,pl310-cache";
106 reg = <0x8000 0x1000>;
107 cache-unified;
108 cache-level = <2>;
109 arm,double-linefill-incr = <0>;
110 arm,double-linefill-wrap = <0>;
111 arm,double-linefill = <0>;
112 prefetch-data = <1>;
113 };
114
115 scu@c000 {
116 compatible = "arm,cortex-a9-scu";
117 reg = <0xc000 0x58>;
118 };
119
120 timer@c200 {
121 compatible = "arm,cortex-a9-global-timer";
122 reg = <0xc200 0x20>;
123 interrupts = <GIC_PPI 11 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
124 clocks = <&coreclk 2>;
125 };
126
127 timer@c600 {
128 compatible = "arm,cortex-a9-twd-timer";
129 reg = <0xc600 0x20>;
130 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
131 clocks = <&coreclk 2>;
132 };
133
134 gic: interrupt-controller@d000 {
135 compatible = "arm,cortex-a9-gic";
136 #interrupt-cells = <3>;
137 #size-cells = <0>;
138 interrupt-controller;
139 reg = <0xd000 0x1000>,
140 <0xc100 0x100>;
141 };
142
143 i2c0: i2c@11000 {
144 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
145 reg = <0x11000 0x20>;
146 #address-cells = <1>;
147 #size-cells = <0>;
148 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
149 timeout-ms = <1000>;
150 clocks = <&coreclk 0>;
151 status = "disabled";
152 };
153
154 i2c1: i2c@11100 {
155 compatible = "marvell,mv78230-a0-i2c", "marvell,mv64xxx-i2c";
156 reg = <0x11100 0x20>;
157 #address-cells = <1>;
158 #size-cells = <0>;
159 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
160 timeout-ms = <1000>;
161 clocks = <&coreclk 0>;
162 status = "disabled";
163 };
164
165 uart0: serial@12000 {
166 compatible = "snps,dw-apb-uart";
167 reg = <0x12000 0x100>;
168 reg-shift = <2>;
169 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
170 reg-io-width = <1>;
171 clocks = <&coreclk 0>;
172 status = "disabled";
173 };
174
175 uart1: serial@12100 {
176 compatible = "snps,dw-apb-uart";
177 reg = <0x12100 0x100>;
178 reg-shift = <2>;
179 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
180 reg-io-width = <1>;
181 clocks = <&coreclk 0>;
182 status = "disabled";
183 };
184
185 pinctrl: pinctrl@18000 {
186 reg = <0x18000 0x20>;
187
188 ge0_rgmii_pins: ge-rgmii-pins-0 {
189 marvell,pins = "mpp6", "mpp7", "mpp8",
190 "mpp9", "mpp10", "mpp11",
191 "mpp12", "mpp13", "mpp14",
192 "mpp15", "mpp16", "mpp17";
193 marvell,function = "ge0";
194 };
195
196 ge1_rgmii_pins: ge-rgmii-pins-1 {
197 marvell,pins = "mpp21", "mpp27", "mpp28",
198 "mpp29", "mpp30", "mpp31",
199 "mpp32", "mpp37", "mpp38",
200 "mpp39", "mpp40", "mpp41";
201 marvell,function = "ge1";
202 };
203
204 i2c0_pins: i2c-pins-0 {
205 marvell,pins = "mpp2", "mpp3";
206 marvell,function = "i2c0";
207 };
208
209 mdio_pins: mdio-pins {
210 marvell,pins = "mpp4", "mpp5";
211 marvell,function = "ge";
212 };
213
214 ref_clk0_pins: ref-clk-pins-0 {
215 marvell,pins = "mpp45";
216 marvell,function = "ref";
217 };
218
219 ref_clk1_pins: ref-clk-pins-1 {
220 marvell,pins = "mpp46";
221 marvell,function = "ref";
222 };
223
224 spi0_pins: spi-pins-0 {
225 marvell,pins = "mpp22", "mpp23", "mpp24",
226 "mpp25";
227 marvell,function = "spi0";
228 };
229
230 spi1_pins: spi-pins-1 {
231 marvell,pins = "mpp56", "mpp57", "mpp58",
232 "mpp59";
233 marvell,function = "spi1";
234 };
235
236 nand_pins: nand-pins {
237 marvell,pins = "mpp22", "mpp34", "mpp23",
238 "mpp33", "mpp38", "mpp28",
239 "mpp40", "mpp42", "mpp35",
240 "mpp36", "mpp25", "mpp30",
241 "mpp32";
242 marvell,function = "dev";
243 };
244
245 nand_rb: nand-rb {
246 marvell,pins = "mpp41";
247 marvell,function = "nand";
248 };
249
250 uart0_pins: uart-pins-0 {
251 marvell,pins = "mpp0", "mpp1";
252 marvell,function = "ua0";
253 };
254
255 uart1_pins: uart-pins-1 {
256 marvell,pins = "mpp19", "mpp20";
257 marvell,function = "ua1";
258 };
259
260 sdhci_pins: sdhci-pins {
261 marvell,pins = "mpp48", "mpp49", "mpp50",
262 "mpp52", "mpp53", "mpp54",
263 "mpp55", "mpp57", "mpp58",
264 "mpp59";
265 marvell,function = "sd0";
266 };
267
268 sata0_pins: sata-pins-0 {
269 marvell,pins = "mpp20";
270 marvell,function = "sata0";
271 };
272
273 sata1_pins: sata-pins-1 {
274 marvell,pins = "mpp19";
275 marvell,function = "sata1";
276 };
277
278 sata2_pins: sata-pins-2 {
279 marvell,pins = "mpp47";
280 marvell,function = "sata2";
281 };
282
283 sata3_pins: sata-pins-3 {
284 marvell,pins = "mpp44";
285 marvell,function = "sata3";
286 };
287 };
288
289 gpio0: gpio@18100 {
290 compatible = "marvell,armada-370-gpio",
291 "marvell,orion-gpio";
292 reg = <0x18100 0x40>, <0x181c0 0x08>;
293 reg-names = "gpio", "pwm";
294 ngpios = <32>;
295 gpio-controller;
296 #gpio-cells = <2>;
297 #pwm-cells = <2>;
298 interrupt-controller;
299 #interrupt-cells = <2>;
300 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
301 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
302 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
303 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
304 clocks = <&coreclk 0>;
305 };
306
307 gpio1: gpio@18140 {
308 compatible = "marvell,armada-370-gpio",
309 "marvell,orion-gpio";
310 reg = <0x18140 0x40>, <0x181c8 0x08>;
311 reg-names = "gpio", "pwm";
312 ngpios = <28>;
313 gpio-controller;
314 #gpio-cells = <2>;
315 #pwm-cells = <2>;
316 interrupt-controller;
317 #interrupt-cells = <2>;
318 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
319 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
320 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
321 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
322 clocks = <&coreclk 0>;
323 };
324
325 systemc: system-controller@18200 {
326 compatible = "marvell,armada-380-system-controller",
327 "marvell,armada-370-xp-system-controller";
328 reg = <0x18200 0x100>;
329 };
330
331 gateclk: clock-gating-control@18220 {
332 compatible = "marvell,armada-380-gating-clock";
333 reg = <0x18220 0x4>;
334 clocks = <&coreclk 0>;
335 #clock-cells = <1>;
336 };
337
338 coreclk: mvebu-sar@18600 {
339 compatible = "marvell,armada-380-core-clock";
340 reg = <0x18600 0x04>;
341 #clock-cells = <1>;
342 };
343
344 mbusc: mbus-controller@20000 {
345 compatible = "marvell,mbus-controller";
346 reg = <0x20000 0x100>, <0x20180 0x20>,
347 <0x20250 0x8>;
348 };
349
350 mpic: interrupt-controller@20a00 {
351 compatible = "marvell,mpic";
352 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
353 #interrupt-cells = <1>;
354 #size-cells = <1>;
355 interrupt-controller;
356 msi-controller;
357 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
358 };
359
360 timer: timer@20300 {
361 compatible = "marvell,armada-380-timer",
362 "marvell,armada-xp-timer";
363 reg = <0x20300 0x30>, <0x21040 0x30>;
364 interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
365 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
366 <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
367 <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
368 <&mpic 5>,
369 <&mpic 6>;
370 clocks = <&coreclk 2>, <&refclk>;
371 clock-names = "nbclk", "fixed";
372 };
373
374 watchdog: watchdog@20300 {
375 compatible = "marvell,armada-380-wdt";
376 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
377 clocks = <&coreclk 2>, <&refclk>;
378 clock-names = "nbclk", "fixed";
379 };
380
381 cpurst: cpurst@20800 {
382 compatible = "marvell,armada-370-cpu-reset";
383 reg = <0x20800 0x10>;
384 };
385
386 mpcore-soc-ctrl@20d20 {
387 compatible = "marvell,armada-380-mpcore-soc-ctrl";
388 reg = <0x20d20 0x6c>;
389 };
390
391 coherencyfab: coherency-fabric@21010 {
392 compatible = "marvell,armada-380-coherency-fabric";
393 reg = <0x21010 0x1c>;
394 };
395
396 pmsu: pmsu@22000 {
397 compatible = "marvell,armada-380-pmsu";
398 reg = <0x22000 0x1000>;
399 };
400
401 /*
402 * As a special exception to the "order by
403 * register address" rule, the eth0 node is
404 * placed here to ensure that it gets
405 * registered as the first interface, since
406 * the network subsystem doesn't allow naming
407 * interfaces using DT aliases. Without this,
408 * the ordering of interfaces is different
409 * from the one used in U-Boot and the
410 * labeling of interfaces on the boards, which
411 * is very confusing for users.
412 */
413 eth0: ethernet@70000 {
414 compatible = "marvell,armada-370-neta";
415 reg = <0x70000 0x4000>;
416 interrupts-extended = <&mpic 8>;
417 clocks = <&gateclk 4>;
418 tx-csum-limit = <9800>;
419 status = "disabled";
420 };
421
422 eth1: ethernet@30000 {
423 compatible = "marvell,armada-370-neta";
424 reg = <0x30000 0x4000>;
425 interrupts-extended = <&mpic 10>;
426 clocks = <&gateclk 3>;
427 status = "disabled";
428 };
429
430 eth2: ethernet@34000 {
431 compatible = "marvell,armada-370-neta";
432 reg = <0x34000 0x4000>;
433 interrupts-extended = <&mpic 12>;
434 clocks = <&gateclk 2>;
435 status = "disabled";
436 };
437
438 usb0: usb@58000 {
439 compatible = "marvell,orion-ehci";
440 reg = <0x58000 0x500>;
441 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
442 clocks = <&gateclk 18>;
443 status = "disabled";
444 };
445
446 xor0: xor@60800 {
447 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
448 reg = <0x60800 0x100
449 0x60a00 0x100>;
450 clocks = <&gateclk 22>;
451 status = "okay";
452
453 xor00 {
454 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
455 dmacap,memcpy;
456 dmacap,xor;
457 };
458 xor01 {
459 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
460 dmacap,memcpy;
461 dmacap,xor;
462 dmacap,memset;
463 };
464 };
465
466 xor1: xor@60900 {
467 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
468 reg = <0x60900 0x100
469 0x60b00 0x100>;
470 clocks = <&gateclk 28>;
471 status = "okay";
472
473 xor10 {
474 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
475 dmacap,memcpy;
476 dmacap,xor;
477 };
478 xor11 {
479 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
480 dmacap,memcpy;
481 dmacap,xor;
482 dmacap,memset;
483 };
484 };
485
486 mdio: mdio@72004 {
487 #address-cells = <1>;
488 #size-cells = <0>;
489 compatible = "marvell,orion-mdio";
490 reg = <0x72004 0x4>;
491 clocks = <&gateclk 4>;
492 };
493
494 cesa: crypto@90000 {
495 compatible = "marvell,armada-38x-crypto";
496 reg = <0x90000 0x10000>;
497 reg-names = "regs";
498 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
499 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
500 clocks = <&gateclk 23>, <&gateclk 21>,
501 <&gateclk 14>, <&gateclk 16>;
502 clock-names = "cesa0", "cesa1",
503 "cesaz0", "cesaz1";
504 marvell,crypto-srams = <&crypto_sram0>,
505 <&crypto_sram1>;
506 marvell,crypto-sram-size = <0x800>;
507 };
508
509 rtc: rtc@a3800 {
510 compatible = "marvell,armada-380-rtc";
511 reg = <0xa3800 0x20>, <0x184a0 0x0c>;
512 reg-names = "rtc", "rtc-soc";
513 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
514 };
515
516 ahci0: sata@a8000 {
517 compatible = "marvell,armada-380-ahci";
518 reg = <0xa8000 0x2000>;
519 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
520 clocks = <&gateclk 15>;
521 status = "disabled";
522 };
523
524 bm: bm@c8000 {
525 compatible = "marvell,armada-380-neta-bm";
526 reg = <0xc8000 0xac>;
527 clocks = <&gateclk 13>;
528 internal-mem = <&bm_bppi>;
529 status = "disabled";
530 };
531
532 ahci1: sata@e0000 {
533 compatible = "marvell,armada-380-ahci";
534 reg = <0xe0000 0x2000>;
535 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
536 clocks = <&gateclk 30>;
537 status = "disabled";
538 };
539
540 coredivclk: clock@e4250 {
541 compatible = "marvell,armada-380-corediv-clock";
542 reg = <0xe4250 0xc>;
543 #clock-cells = <1>;
544 clocks = <&mainpll>;
545 clock-output-names = "nand";
546 };
547
548 thermal: thermal@e8078 {
549 compatible = "marvell,armada380-thermal";
550 reg = <0xe4078 0x4>, <0xe4074 0x4>;
551 status = "okay";
552 };
553
554 nand: flash@d0000 {
555 compatible = "marvell,armada370-nand";
556 reg = <0xd0000 0x54>;
557 #address-cells = <1>;
558 #size-cells = <1>;
559 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
560 clocks = <&coredivclk 0>;
561 status = "disabled";
562 };
563
564 sdhci: sdhci@d8000 {
565 compatible = "marvell,armada-380-sdhci";
566 reg-names = "sdhci", "mbus", "conf-sdio3";
567 reg = <0xd8000 0x1000>,
568 <0xdc000 0x100>,
569 <0x18454 0x4>;
570 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
571 clocks = <&gateclk 17>;
572 mrvl,clk-delay-cycles = <0x1F>;
573 status = "disabled";
574 };
575
576 usb3_0: usb3@f0000 {
577 compatible = "marvell,armada-380-xhci";
578 reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
579 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
580 clocks = <&gateclk 9>;
581 status = "disabled";
582 };
583
584 usb3_1: usb3@f8000 {
585 compatible = "marvell,armada-380-xhci";
586 reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
587 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
588 clocks = <&gateclk 10>;
589 status = "disabled";
590 };
591 };
592
593 crypto_sram0: sa-sram0 {
594 compatible = "mmio-sram";
595 reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
596 clocks = <&gateclk 23>;
597 #address-cells = <1>;
598 #size-cells = <1>;
599 ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
600 };
601
602 crypto_sram1: sa-sram1 {
603 compatible = "mmio-sram";
604 reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
605 clocks = <&gateclk 21>;
606 #address-cells = <1>;
607 #size-cells = <1>;
608 ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
609 };
610
611 bm_bppi: bm-bppi {
612 compatible = "mmio-sram";
613 reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
614 ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
615 #address-cells = <1>;
616 #size-cells = <1>;
617 clocks = <&gateclk 13>;
618 no-memory-wc;
619 status = "disabled";
620 };
621
622 spi0: spi@10600 {
623 compatible = "marvell,armada-380-spi",
624 "marvell,orion-spi";
625 reg = <MBUS_ID(0xf0, 0x01) 0x10600 0x50>;
626 #address-cells = <1>;
627 #size-cells = <0>;
628 cell-index = <0>;
629 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
630 clocks = <&coreclk 0>;
631 status = "disabled";
632 };
633
634 spi1: spi@10680 {
635 compatible = "marvell,armada-380-spi",
636 "marvell,orion-spi";
637 reg = <MBUS_ID(0xf0, 0x01) 0x10680 0x50>;
638 #address-cells = <1>;
639 #size-cells = <0>;
640 cell-index = <1>;
641 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
642 clocks = <&coreclk 0>;
643 status = "disabled";
644 };
645 };
646
647 clocks {
648 /* 1 GHz fixed main PLL */
649 mainpll: mainpll {
650 compatible = "fixed-clock";
651 #clock-cells = <0>;
652 clock-frequency = <1000000000>;
653 };
654
655 /* 25 MHz reference crystal */
656 refclk: oscillator {
657 compatible = "fixed-clock";
658 #clock-cells = <0>;
659 clock-frequency = <25000000>;
660 };
661 };
662};
1/*
2 * Device Tree Include file for Marvell Armada 38x family of SoCs.
3 *
4 * Copyright (C) 2014 Marvell
5 *
6 * Lior Amsalem <alior@marvell.com>
7 * Gregory CLEMENT <gregory.clement@free-electrons.com>
8 * Thomas Petazzoni <thomas.petazzoni@free-electrons.com>
9 *
10 * This file is dual-licensed: you can use it either under the terms
11 * of the GPL or the X11 license, at your option. Note that this dual
12 * licensing only applies to this file, and not this project as a
13 * whole.
14 *
15 * a) This file is free software; you can redistribute it and/or
16 * modify it under the terms of the GNU General Public License as
17 * published by the Free Software Foundation; either version 2 of the
18 * License, or (at your option) any later version.
19 *
20 * This file is distributed in the hope that it will be useful
21 * but WITHOUT ANY WARRANTY; without even the implied warranty of
22 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
23 * GNU General Public License for more details.
24 *
25 * Or, alternatively
26 *
27 * b) Permission is hereby granted, free of charge, to any person
28 * obtaining a copy of this software and associated documentation
29 * files (the "Software"), to deal in the Software without
30 * restriction, including without limitation the rights to use
31 * copy, modify, merge, publish, distribute, sublicense, and/or
32 * sell copies of the Software, and to permit persons to whom the
33 * Software is furnished to do so, subject to the following
34 * conditions:
35 *
36 * The above copyright notice and this permission notice shall be
37 * included in all copies or substantial portions of the Software.
38 *
39 * THE SOFTWARE IS PROVIDED , WITHOUT WARRANTY OF ANY KIND
40 * EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
41 * OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
42 * NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
43 * HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY
44 * WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
45 * FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
46 * OTHER DEALINGS IN THE SOFTWARE.
47 */
48
49#include "skeleton.dtsi"
50#include <dt-bindings/interrupt-controller/arm-gic.h>
51#include <dt-bindings/interrupt-controller/irq.h>
52
53#define MBUS_ID(target,attributes) (((target) << 24) | ((attributes) << 16))
54
55/ {
56 model = "Marvell Armada 38x family SoC";
57 compatible = "marvell,armada380";
58
59 aliases {
60 gpio0 = &gpio0;
61 gpio1 = &gpio1;
62 serial0 = &uart0;
63 serial1 = &uart1;
64 };
65
66 pmu {
67 compatible = "arm,cortex-a9-pmu";
68 interrupts-extended = <&mpic 3>;
69 };
70
71 soc {
72 compatible = "marvell,armada380-mbus", "simple-bus";
73 #address-cells = <2>;
74 #size-cells = <1>;
75 controller = <&mbusc>;
76 interrupt-parent = <&gic>;
77 pcie-mem-aperture = <0xe0000000 0x8000000>;
78 pcie-io-aperture = <0xe8000000 0x100000>;
79
80 bootrom {
81 compatible = "marvell,bootrom";
82 reg = <MBUS_ID(0x01, 0x1d) 0 0x200000>;
83 };
84
85 devbus-bootcs {
86 compatible = "marvell,mvebu-devbus";
87 reg = <MBUS_ID(0xf0, 0x01) 0x10400 0x8>;
88 ranges = <0 MBUS_ID(0x01, 0x2f) 0 0xffffffff>;
89 #address-cells = <1>;
90 #size-cells = <1>;
91 clocks = <&coreclk 0>;
92 status = "disabled";
93 };
94
95 devbus-cs0 {
96 compatible = "marvell,mvebu-devbus";
97 reg = <MBUS_ID(0xf0, 0x01) 0x10408 0x8>;
98 ranges = <0 MBUS_ID(0x01, 0x3e) 0 0xffffffff>;
99 #address-cells = <1>;
100 #size-cells = <1>;
101 clocks = <&coreclk 0>;
102 status = "disabled";
103 };
104
105 devbus-cs1 {
106 compatible = "marvell,mvebu-devbus";
107 reg = <MBUS_ID(0xf0, 0x01) 0x10410 0x8>;
108 ranges = <0 MBUS_ID(0x01, 0x3d) 0 0xffffffff>;
109 #address-cells = <1>;
110 #size-cells = <1>;
111 clocks = <&coreclk 0>;
112 status = "disabled";
113 };
114
115 devbus-cs2 {
116 compatible = "marvell,mvebu-devbus";
117 reg = <MBUS_ID(0xf0, 0x01) 0x10418 0x8>;
118 ranges = <0 MBUS_ID(0x01, 0x3b) 0 0xffffffff>;
119 #address-cells = <1>;
120 #size-cells = <1>;
121 clocks = <&coreclk 0>;
122 status = "disabled";
123 };
124
125 devbus-cs3 {
126 compatible = "marvell,mvebu-devbus";
127 reg = <MBUS_ID(0xf0, 0x01) 0x10420 0x8>;
128 ranges = <0 MBUS_ID(0x01, 0x37) 0 0xffffffff>;
129 #address-cells = <1>;
130 #size-cells = <1>;
131 clocks = <&coreclk 0>;
132 status = "disabled";
133 };
134
135 internal-regs {
136 compatible = "simple-bus";
137 #address-cells = <1>;
138 #size-cells = <1>;
139 ranges = <0 MBUS_ID(0xf0, 0x01) 0 0x100000>;
140
141 L2: cache-controller@8000 {
142 compatible = "arm,pl310-cache";
143 reg = <0x8000 0x1000>;
144 cache-unified;
145 cache-level = <2>;
146 arm,double-linefill-incr = <1>;
147 arm,double-linefill-wrap = <0>;
148 arm,double-linefill = <1>;
149 prefetch-data = <1>;
150 };
151
152 scu@c000 {
153 compatible = "arm,cortex-a9-scu";
154 reg = <0xc000 0x58>;
155 };
156
157 timer@c600 {
158 compatible = "arm,cortex-a9-twd-timer";
159 reg = <0xc600 0x20>;
160 interrupts = <GIC_PPI 13 (IRQ_TYPE_EDGE_RISING | GIC_CPU_MASK_SIMPLE(2))>;
161 clocks = <&coreclk 2>;
162 };
163
164 gic: interrupt-controller@d000 {
165 compatible = "arm,cortex-a9-gic";
166 #interrupt-cells = <3>;
167 #size-cells = <0>;
168 interrupt-controller;
169 reg = <0xd000 0x1000>,
170 <0xc100 0x100>;
171 };
172
173 spi0: spi@10600 {
174 compatible = "marvell,armada-380-spi",
175 "marvell,orion-spi";
176 reg = <0x10600 0x50>;
177 #address-cells = <1>;
178 #size-cells = <0>;
179 cell-index = <0>;
180 interrupts = <GIC_SPI 1 IRQ_TYPE_LEVEL_HIGH>;
181 clocks = <&coreclk 0>;
182 status = "disabled";
183 };
184
185 spi1: spi@10680 {
186 compatible = "marvell,armada-380-spi",
187 "marvell,orion-spi";
188 reg = <0x10680 0x50>;
189 #address-cells = <1>;
190 #size-cells = <0>;
191 cell-index = <1>;
192 interrupts = <GIC_SPI 63 IRQ_TYPE_LEVEL_HIGH>;
193 clocks = <&coreclk 0>;
194 status = "disabled";
195 };
196
197 i2c0: i2c@11000 {
198 compatible = "marvell,mv64xxx-i2c";
199 reg = <0x11000 0x20>;
200 #address-cells = <1>;
201 #size-cells = <0>;
202 interrupts = <GIC_SPI 2 IRQ_TYPE_LEVEL_HIGH>;
203 timeout-ms = <1000>;
204 clocks = <&coreclk 0>;
205 status = "disabled";
206 };
207
208 i2c1: i2c@11100 {
209 compatible = "marvell,mv64xxx-i2c";
210 reg = <0x11100 0x20>;
211 #address-cells = <1>;
212 #size-cells = <0>;
213 interrupts = <GIC_SPI 3 IRQ_TYPE_LEVEL_HIGH>;
214 timeout-ms = <1000>;
215 clocks = <&coreclk 0>;
216 status = "disabled";
217 };
218
219 uart0: serial@12000 {
220 compatible = "snps,dw-apb-uart";
221 reg = <0x12000 0x100>;
222 reg-shift = <2>;
223 interrupts = <GIC_SPI 12 IRQ_TYPE_LEVEL_HIGH>;
224 reg-io-width = <1>;
225 clocks = <&coreclk 0>;
226 status = "disabled";
227 };
228
229 uart1: serial@12100 {
230 compatible = "snps,dw-apb-uart";
231 reg = <0x12100 0x100>;
232 reg-shift = <2>;
233 interrupts = <GIC_SPI 13 IRQ_TYPE_LEVEL_HIGH>;
234 reg-io-width = <1>;
235 clocks = <&coreclk 0>;
236 status = "disabled";
237 };
238
239 pinctrl: pinctrl@18000 {
240 reg = <0x18000 0x20>;
241
242 ge0_rgmii_pins: ge-rgmii-pins-0 {
243 marvell,pins = "mpp6", "mpp7", "mpp8",
244 "mpp9", "mpp10", "mpp11",
245 "mpp12", "mpp13", "mpp14",
246 "mpp15", "mpp16", "mpp17";
247 marvell,function = "ge0";
248 };
249
250 ge1_rgmii_pins: ge-rgmii-pins-1 {
251 marvell,pins = "mpp21", "mpp27", "mpp28",
252 "mpp29", "mpp30", "mpp31",
253 "mpp32", "mpp37", "mpp38",
254 "mpp39", "mpp40", "mpp41";
255 marvell,function = "ge1";
256 };
257
258 i2c0_pins: i2c-pins-0 {
259 marvell,pins = "mpp2", "mpp3";
260 marvell,function = "i2c0";
261 };
262
263 mdio_pins: mdio-pins {
264 marvell,pins = "mpp4", "mpp5";
265 marvell,function = "ge";
266 };
267
268 ref_clk0_pins: ref-clk-pins-0 {
269 marvell,pins = "mpp45";
270 marvell,function = "ref";
271 };
272
273 ref_clk1_pins: ref-clk-pins-1 {
274 marvell,pins = "mpp46";
275 marvell,function = "ref";
276 };
277
278 spi0_pins: spi-pins-0 {
279 marvell,pins = "mpp22", "mpp23", "mpp24",
280 "mpp25";
281 marvell,function = "spi0";
282 };
283
284 spi1_pins: spi-pins-1 {
285 marvell,pins = "mpp56", "mpp57", "mpp58",
286 "mpp59";
287 marvell,function = "spi1";
288 };
289
290 uart0_pins: uart-pins-0 {
291 marvell,pins = "mpp0", "mpp1";
292 marvell,function = "ua0";
293 };
294
295 uart1_pins: uart-pins-1 {
296 marvell,pins = "mpp19", "mpp20";
297 marvell,function = "ua1";
298 };
299
300 sdhci_pins: sdhci-pins {
301 marvell,pins = "mpp48", "mpp49", "mpp50",
302 "mpp52", "mpp53", "mpp54",
303 "mpp55", "mpp57", "mpp58",
304 "mpp59";
305 marvell,function = "sd0";
306 };
307
308 sata0_pins: sata-pins-0 {
309 marvell,pins = "mpp20";
310 marvell,function = "sata0";
311 };
312
313 sata1_pins: sata-pins-1 {
314 marvell,pins = "mpp19";
315 marvell,function = "sata1";
316 };
317
318 sata2_pins: sata-pins-2 {
319 marvell,pins = "mpp47";
320 marvell,function = "sata2";
321 };
322
323 sata3_pins: sata-pins-3 {
324 marvell,pins = "mpp44";
325 marvell,function = "sata3";
326 };
327 };
328
329 gpio0: gpio@18100 {
330 compatible = "marvell,orion-gpio";
331 reg = <0x18100 0x40>;
332 ngpios = <32>;
333 gpio-controller;
334 #gpio-cells = <2>;
335 interrupt-controller;
336 #interrupt-cells = <2>;
337 interrupts = <GIC_SPI 53 IRQ_TYPE_LEVEL_HIGH>,
338 <GIC_SPI 54 IRQ_TYPE_LEVEL_HIGH>,
339 <GIC_SPI 55 IRQ_TYPE_LEVEL_HIGH>,
340 <GIC_SPI 56 IRQ_TYPE_LEVEL_HIGH>;
341 };
342
343 gpio1: gpio@18140 {
344 compatible = "marvell,orion-gpio";
345 reg = <0x18140 0x40>;
346 ngpios = <28>;
347 gpio-controller;
348 #gpio-cells = <2>;
349 interrupt-controller;
350 #interrupt-cells = <2>;
351 interrupts = <GIC_SPI 58 IRQ_TYPE_LEVEL_HIGH>,
352 <GIC_SPI 59 IRQ_TYPE_LEVEL_HIGH>,
353 <GIC_SPI 60 IRQ_TYPE_LEVEL_HIGH>,
354 <GIC_SPI 61 IRQ_TYPE_LEVEL_HIGH>;
355 };
356
357 system-controller@18200 {
358 compatible = "marvell,armada-380-system-controller",
359 "marvell,armada-370-xp-system-controller";
360 reg = <0x18200 0x100>;
361 };
362
363 gateclk: clock-gating-control@18220 {
364 compatible = "marvell,armada-380-gating-clock";
365 reg = <0x18220 0x4>;
366 clocks = <&coreclk 0>;
367 #clock-cells = <1>;
368 };
369
370 coreclk: mvebu-sar@18600 {
371 compatible = "marvell,armada-380-core-clock";
372 reg = <0x18600 0x04>;
373 #clock-cells = <1>;
374 };
375
376 mbusc: mbus-controller@20000 {
377 compatible = "marvell,mbus-controller";
378 reg = <0x20000 0x100>, <0x20180 0x20>;
379 };
380
381 mpic: interrupt-controller@20a00 {
382 compatible = "marvell,mpic";
383 reg = <0x20a00 0x2d0>, <0x21070 0x58>;
384 #interrupt-cells = <1>;
385 #size-cells = <1>;
386 interrupt-controller;
387 msi-controller;
388 interrupts = <GIC_PPI 15 IRQ_TYPE_LEVEL_HIGH>;
389 };
390
391 timer@20300 {
392 compatible = "marvell,armada-380-timer",
393 "marvell,armada-xp-timer";
394 reg = <0x20300 0x30>, <0x21040 0x30>;
395 interrupts-extended = <&gic GIC_SPI 8 IRQ_TYPE_LEVEL_HIGH>,
396 <&gic GIC_SPI 9 IRQ_TYPE_LEVEL_HIGH>,
397 <&gic GIC_SPI 10 IRQ_TYPE_LEVEL_HIGH>,
398 <&gic GIC_SPI 11 IRQ_TYPE_LEVEL_HIGH>,
399 <&mpic 5>,
400 <&mpic 6>;
401 clocks = <&coreclk 2>, <&refclk>;
402 clock-names = "nbclk", "fixed";
403 };
404
405 watchdog@20300 {
406 compatible = "marvell,armada-380-wdt";
407 reg = <0x20300 0x34>, <0x20704 0x4>, <0x18260 0x4>;
408 clocks = <&coreclk 2>, <&refclk>;
409 clock-names = "nbclk", "fixed";
410 };
411
412 cpurst@20800 {
413 compatible = "marvell,armada-370-cpu-reset";
414 reg = <0x20800 0x10>;
415 };
416
417 mpcore-soc-ctrl@20d20 {
418 compatible = "marvell,armada-380-mpcore-soc-ctrl";
419 reg = <0x20d20 0x6c>;
420 };
421
422 coherency-fabric@21010 {
423 compatible = "marvell,armada-380-coherency-fabric";
424 reg = <0x21010 0x1c>;
425 };
426
427 pmsu@22000 {
428 compatible = "marvell,armada-380-pmsu";
429 reg = <0x22000 0x1000>;
430 };
431
432 /*
433 * As a special exception to the "order by
434 * register address" rule, the eth0 node is
435 * placed here to ensure that it gets
436 * registered as the first interface, since
437 * the network subsystem doesn't allow naming
438 * interfaces using DT aliases. Without this,
439 * the ordering of interfaces is different
440 * from the one used in U-Boot and the
441 * labeling of interfaces on the boards, which
442 * is very confusing for users.
443 */
444 eth0: ethernet@70000 {
445 compatible = "marvell,armada-370-neta";
446 reg = <0x70000 0x4000>;
447 interrupts-extended = <&mpic 8>;
448 clocks = <&gateclk 4>;
449 tx-csum-limit = <9800>;
450 status = "disabled";
451 };
452
453 eth1: ethernet@30000 {
454 compatible = "marvell,armada-370-neta";
455 reg = <0x30000 0x4000>;
456 interrupts-extended = <&mpic 10>;
457 clocks = <&gateclk 3>;
458 status = "disabled";
459 };
460
461 eth2: ethernet@34000 {
462 compatible = "marvell,armada-370-neta";
463 reg = <0x34000 0x4000>;
464 interrupts-extended = <&mpic 12>;
465 clocks = <&gateclk 2>;
466 status = "disabled";
467 };
468
469 usb@58000 {
470 compatible = "marvell,orion-ehci";
471 reg = <0x58000 0x500>;
472 interrupts = <GIC_SPI 18 IRQ_TYPE_LEVEL_HIGH>;
473 clocks = <&gateclk 18>;
474 status = "disabled";
475 };
476
477 xor@60800 {
478 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
479 reg = <0x60800 0x100
480 0x60a00 0x100>;
481 clocks = <&gateclk 22>;
482 status = "okay";
483
484 xor00 {
485 interrupts = <GIC_SPI 22 IRQ_TYPE_LEVEL_HIGH>;
486 dmacap,memcpy;
487 dmacap,xor;
488 };
489 xor01 {
490 interrupts = <GIC_SPI 23 IRQ_TYPE_LEVEL_HIGH>;
491 dmacap,memcpy;
492 dmacap,xor;
493 dmacap,memset;
494 };
495 };
496
497 xor@60900 {
498 compatible = "marvell,armada-380-xor", "marvell,orion-xor";
499 reg = <0x60900 0x100
500 0x60b00 0x100>;
501 clocks = <&gateclk 28>;
502 status = "okay";
503
504 xor10 {
505 interrupts = <GIC_SPI 65 IRQ_TYPE_LEVEL_HIGH>;
506 dmacap,memcpy;
507 dmacap,xor;
508 };
509 xor11 {
510 interrupts = <GIC_SPI 66 IRQ_TYPE_LEVEL_HIGH>;
511 dmacap,memcpy;
512 dmacap,xor;
513 dmacap,memset;
514 };
515 };
516
517 mdio: mdio@72004 {
518 #address-cells = <1>;
519 #size-cells = <0>;
520 compatible = "marvell,orion-mdio";
521 reg = <0x72004 0x4>;
522 clocks = <&gateclk 4>;
523 };
524
525 crypto@90000 {
526 compatible = "marvell,armada-38x-crypto";
527 reg = <0x90000 0x10000>;
528 reg-names = "regs";
529 interrupts = <GIC_SPI 19 IRQ_TYPE_LEVEL_HIGH>,
530 <GIC_SPI 20 IRQ_TYPE_LEVEL_HIGH>;
531 clocks = <&gateclk 23>, <&gateclk 21>,
532 <&gateclk 14>, <&gateclk 16>;
533 clock-names = "cesa0", "cesa1",
534 "cesaz0", "cesaz1";
535 marvell,crypto-srams = <&crypto_sram0>,
536 <&crypto_sram1>;
537 marvell,crypto-sram-size = <0x800>;
538 };
539
540 rtc@a3800 {
541 compatible = "marvell,armada-380-rtc";
542 reg = <0xa3800 0x20>, <0x184a0 0x0c>;
543 reg-names = "rtc", "rtc-soc";
544 interrupts = <GIC_SPI 21 IRQ_TYPE_LEVEL_HIGH>;
545 };
546
547 sata@a8000 {
548 compatible = "marvell,armada-380-ahci";
549 reg = <0xa8000 0x2000>;
550 interrupts = <GIC_SPI 26 IRQ_TYPE_LEVEL_HIGH>;
551 clocks = <&gateclk 15>;
552 status = "disabled";
553 };
554
555 bm: bm@c8000 {
556 compatible = "marvell,armada-380-neta-bm";
557 reg = <0xc8000 0xac>;
558 clocks = <&gateclk 13>;
559 internal-mem = <&bm_bppi>;
560 status = "disabled";
561 };
562
563 sata@e0000 {
564 compatible = "marvell,armada-380-ahci";
565 reg = <0xe0000 0x2000>;
566 interrupts = <GIC_SPI 28 IRQ_TYPE_LEVEL_HIGH>;
567 clocks = <&gateclk 30>;
568 status = "disabled";
569 };
570
571 coredivclk: clock@e4250 {
572 compatible = "marvell,armada-380-corediv-clock";
573 reg = <0xe4250 0xc>;
574 #clock-cells = <1>;
575 clocks = <&mainpll>;
576 clock-output-names = "nand";
577 };
578
579 thermal@e8078 {
580 compatible = "marvell,armada380-thermal";
581 reg = <0xe4078 0x4>, <0xe4074 0x4>;
582 status = "okay";
583 };
584
585 flash@d0000 {
586 compatible = "marvell,armada370-nand";
587 reg = <0xd0000 0x54>;
588 #address-cells = <1>;
589 #size-cells = <1>;
590 interrupts = <GIC_SPI 84 IRQ_TYPE_LEVEL_HIGH>;
591 clocks = <&coredivclk 0>;
592 status = "disabled";
593 };
594
595 sdhci@d8000 {
596 compatible = "marvell,armada-380-sdhci";
597 reg-names = "sdhci", "mbus", "conf-sdio3";
598 reg = <0xd8000 0x1000>,
599 <0xdc000 0x100>,
600 <0x18454 0x4>;
601 interrupts = <GIC_SPI 25 IRQ_TYPE_LEVEL_HIGH>;
602 clocks = <&gateclk 17>;
603 mrvl,clk-delay-cycles = <0x1F>;
604 status = "disabled";
605 };
606
607 usb3@f0000 {
608 compatible = "marvell,armada-380-xhci";
609 reg = <0xf0000 0x4000>,<0xf4000 0x4000>;
610 interrupts = <GIC_SPI 16 IRQ_TYPE_LEVEL_HIGH>;
611 clocks = <&gateclk 9>;
612 status = "disabled";
613 };
614
615 usb3@f8000 {
616 compatible = "marvell,armada-380-xhci";
617 reg = <0xf8000 0x4000>,<0xfc000 0x4000>;
618 interrupts = <GIC_SPI 17 IRQ_TYPE_LEVEL_HIGH>;
619 clocks = <&gateclk 10>;
620 status = "disabled";
621 };
622 };
623
624 crypto_sram0: sa-sram0 {
625 compatible = "mmio-sram";
626 reg = <MBUS_ID(0x09, 0x19) 0 0x800>;
627 clocks = <&gateclk 23>;
628 #address-cells = <1>;
629 #size-cells = <1>;
630 ranges = <0 MBUS_ID(0x09, 0x19) 0 0x800>;
631 };
632
633 crypto_sram1: sa-sram1 {
634 compatible = "mmio-sram";
635 reg = <MBUS_ID(0x09, 0x15) 0 0x800>;
636 clocks = <&gateclk 21>;
637 #address-cells = <1>;
638 #size-cells = <1>;
639 ranges = <0 MBUS_ID(0x09, 0x15) 0 0x800>;
640 };
641
642 bm_bppi: bm-bppi {
643 compatible = "mmio-sram";
644 reg = <MBUS_ID(0x0c, 0x04) 0 0x100000>;
645 ranges = <0 MBUS_ID(0x0c, 0x04) 0 0x100000>;
646 #address-cells = <1>;
647 #size-cells = <1>;
648 clocks = <&gateclk 13>;
649 no-memory-wc;
650 status = "disabled";
651 };
652 };
653
654 clocks {
655 /* 2 GHz fixed main PLL */
656 mainpll: mainpll {
657 compatible = "fixed-clock";
658 #clock-cells = <0>;
659 clock-frequency = <1000000000>;
660 };
661
662 /* 25 MHz reference crystal */
663 refclk: oscillator {
664 compatible = "fixed-clock";
665 #clock-cells = <0>;
666 clock-frequency = <25000000>;
667 };
668 };
669};