Loading...
1/*
2 * drivers/net/phy/smsc.c
3 *
4 * Driver for SMSC PHYs
5 *
6 * Author: Herbert Valerio Riedel
7 *
8 * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
16 *
17 */
18
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/mii.h>
22#include <linux/ethtool.h>
23#include <linux/of.h>
24#include <linux/phy.h>
25#include <linux/netdevice.h>
26#include <linux/smscphy.h>
27
28struct smsc_hw_stat {
29 const char *string;
30 u8 reg;
31 u8 bits;
32};
33
34static struct smsc_hw_stat smsc_hw_stats[] = {
35 { "phy_symbol_errors", 26, 16},
36};
37
38struct smsc_phy_priv {
39 bool energy_enable;
40};
41
42static int smsc_phy_config_intr(struct phy_device *phydev)
43{
44 int rc = phy_write (phydev, MII_LAN83C185_IM,
45 ((PHY_INTERRUPT_ENABLED == phydev->interrupts)
46 ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
47 : 0));
48
49 return rc < 0 ? rc : 0;
50}
51
52static int smsc_phy_ack_interrupt(struct phy_device *phydev)
53{
54 int rc = phy_read (phydev, MII_LAN83C185_ISF);
55
56 return rc < 0 ? rc : 0;
57}
58
59static int smsc_phy_config_init(struct phy_device *phydev)
60{
61 struct smsc_phy_priv *priv = phydev->priv;
62
63 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
64
65 if (rc < 0)
66 return rc;
67
68 if (priv->energy_enable) {
69 /* Enable energy detect mode for this SMSC Transceivers */
70 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
71 rc | MII_LAN83C185_EDPWRDOWN);
72 if (rc < 0)
73 return rc;
74 }
75
76 return smsc_phy_ack_interrupt(phydev);
77}
78
79static int smsc_phy_reset(struct phy_device *phydev)
80{
81 int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
82 if (rc < 0)
83 return rc;
84
85 /* If the SMSC PHY is in power down mode, then set it
86 * in all capable mode before using it.
87 */
88 if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
89 /* set "all capable" mode */
90 rc |= MII_LAN83C185_MODE_ALL;
91 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
92 }
93
94 /* reset the phy */
95 return genphy_soft_reset(phydev);
96}
97
98static int lan911x_config_init(struct phy_device *phydev)
99{
100 return smsc_phy_ack_interrupt(phydev);
101}
102
103/*
104 * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
105 * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
106 * unstable detection of plugging in Ethernet cable.
107 * This workaround disables Energy Detect Power-Down mode and waiting for
108 * response on link pulses to detect presence of plugged Ethernet cable.
109 * The Energy Detect Power-Down mode is enabled again in the end of procedure to
110 * save approximately 220 mW of power if cable is unplugged.
111 */
112static int lan87xx_read_status(struct phy_device *phydev)
113{
114 struct smsc_phy_priv *priv = phydev->priv;
115
116 int err = genphy_read_status(phydev);
117
118 if (!phydev->link && priv->energy_enable) {
119 int i;
120
121 /* Disable EDPD to wake up PHY */
122 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
123 if (rc < 0)
124 return rc;
125
126 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
127 rc & ~MII_LAN83C185_EDPWRDOWN);
128 if (rc < 0)
129 return rc;
130
131 /* Wait max 640 ms to detect energy */
132 for (i = 0; i < 64; i++) {
133 /* Sleep to allow link test pulses to be sent */
134 msleep(10);
135 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
136 if (rc < 0)
137 return rc;
138 if (rc & MII_LAN83C185_ENERGYON)
139 break;
140 }
141
142 /* Re-enable EDPD */
143 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
144 if (rc < 0)
145 return rc;
146
147 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
148 rc | MII_LAN83C185_EDPWRDOWN);
149 if (rc < 0)
150 return rc;
151 }
152
153 return err;
154}
155
156static int smsc_get_sset_count(struct phy_device *phydev)
157{
158 return ARRAY_SIZE(smsc_hw_stats);
159}
160
161static void smsc_get_strings(struct phy_device *phydev, u8 *data)
162{
163 int i;
164
165 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++) {
166 strncpy(data + i * ETH_GSTRING_LEN,
167 smsc_hw_stats[i].string, ETH_GSTRING_LEN);
168 }
169}
170
171#ifndef UINT64_MAX
172#define UINT64_MAX (u64)(~((u64)0))
173#endif
174static u64 smsc_get_stat(struct phy_device *phydev, int i)
175{
176 struct smsc_hw_stat stat = smsc_hw_stats[i];
177 int val;
178 u64 ret;
179
180 val = phy_read(phydev, stat.reg);
181 if (val < 0)
182 ret = UINT64_MAX;
183 else
184 ret = val;
185
186 return ret;
187}
188
189static void smsc_get_stats(struct phy_device *phydev,
190 struct ethtool_stats *stats, u64 *data)
191{
192 int i;
193
194 for (i = 0; i < ARRAY_SIZE(smsc_hw_stats); i++)
195 data[i] = smsc_get_stat(phydev, i);
196}
197
198static int smsc_phy_probe(struct phy_device *phydev)
199{
200 struct device *dev = &phydev->mdio.dev;
201 struct device_node *of_node = dev->of_node;
202 struct smsc_phy_priv *priv;
203
204 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
205 if (!priv)
206 return -ENOMEM;
207
208 priv->energy_enable = true;
209
210 if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
211 priv->energy_enable = false;
212
213 phydev->priv = priv;
214
215 return 0;
216}
217
218static struct phy_driver smsc_phy_driver[] = {
219{
220 .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
221 .phy_id_mask = 0xfffffff0,
222 .name = "SMSC LAN83C185",
223
224 .features = PHY_BASIC_FEATURES,
225 .flags = PHY_HAS_INTERRUPT,
226
227 .probe = smsc_phy_probe,
228
229 /* basic functions */
230 .config_init = smsc_phy_config_init,
231 .soft_reset = smsc_phy_reset,
232
233 /* IRQ related */
234 .ack_interrupt = smsc_phy_ack_interrupt,
235 .config_intr = smsc_phy_config_intr,
236
237 .suspend = genphy_suspend,
238 .resume = genphy_resume,
239}, {
240 .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
241 .phy_id_mask = 0xfffffff0,
242 .name = "SMSC LAN8187",
243
244 .features = PHY_BASIC_FEATURES,
245 .flags = PHY_HAS_INTERRUPT,
246
247 .probe = smsc_phy_probe,
248
249 /* basic functions */
250 .config_init = smsc_phy_config_init,
251 .soft_reset = smsc_phy_reset,
252
253 /* IRQ related */
254 .ack_interrupt = smsc_phy_ack_interrupt,
255 .config_intr = smsc_phy_config_intr,
256
257 /* Statistics */
258 .get_sset_count = smsc_get_sset_count,
259 .get_strings = smsc_get_strings,
260 .get_stats = smsc_get_stats,
261
262 .suspend = genphy_suspend,
263 .resume = genphy_resume,
264}, {
265 .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
266 .phy_id_mask = 0xfffffff0,
267 .name = "SMSC LAN8700",
268
269 .features = PHY_BASIC_FEATURES,
270 .flags = PHY_HAS_INTERRUPT,
271
272 .probe = smsc_phy_probe,
273
274 /* basic functions */
275 .read_status = lan87xx_read_status,
276 .config_init = smsc_phy_config_init,
277 .soft_reset = smsc_phy_reset,
278
279 /* IRQ related */
280 .ack_interrupt = smsc_phy_ack_interrupt,
281 .config_intr = smsc_phy_config_intr,
282
283 /* Statistics */
284 .get_sset_count = smsc_get_sset_count,
285 .get_strings = smsc_get_strings,
286 .get_stats = smsc_get_stats,
287
288 .suspend = genphy_suspend,
289 .resume = genphy_resume,
290}, {
291 .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
292 .phy_id_mask = 0xfffffff0,
293 .name = "SMSC LAN911x Internal PHY",
294
295 .features = PHY_BASIC_FEATURES,
296 .flags = PHY_HAS_INTERRUPT,
297
298 .probe = smsc_phy_probe,
299
300 /* basic functions */
301 .config_init = lan911x_config_init,
302
303 /* IRQ related */
304 .ack_interrupt = smsc_phy_ack_interrupt,
305 .config_intr = smsc_phy_config_intr,
306
307 .suspend = genphy_suspend,
308 .resume = genphy_resume,
309}, {
310 .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
311 .phy_id_mask = 0xfffffff0,
312 .name = "SMSC LAN8710/LAN8720",
313
314 .features = PHY_BASIC_FEATURES,
315 .flags = PHY_HAS_INTERRUPT | PHY_RST_AFTER_CLK_EN,
316
317 .probe = smsc_phy_probe,
318
319 /* basic functions */
320 .read_status = lan87xx_read_status,
321 .config_init = smsc_phy_config_init,
322 .soft_reset = smsc_phy_reset,
323
324 /* IRQ related */
325 .ack_interrupt = smsc_phy_ack_interrupt,
326 .config_intr = smsc_phy_config_intr,
327
328 /* Statistics */
329 .get_sset_count = smsc_get_sset_count,
330 .get_strings = smsc_get_strings,
331 .get_stats = smsc_get_stats,
332
333 .suspend = genphy_suspend,
334 .resume = genphy_resume,
335}, {
336 .phy_id = 0x0007c110,
337 .phy_id_mask = 0xfffffff0,
338 .name = "SMSC LAN8740",
339
340 .features = PHY_BASIC_FEATURES,
341 .flags = PHY_HAS_INTERRUPT,
342
343 .probe = smsc_phy_probe,
344
345 /* basic functions */
346 .read_status = lan87xx_read_status,
347 .config_init = smsc_phy_config_init,
348 .soft_reset = smsc_phy_reset,
349
350 /* IRQ related */
351 .ack_interrupt = smsc_phy_ack_interrupt,
352 .config_intr = smsc_phy_config_intr,
353
354 /* Statistics */
355 .get_sset_count = smsc_get_sset_count,
356 .get_strings = smsc_get_strings,
357 .get_stats = smsc_get_stats,
358
359 .suspend = genphy_suspend,
360 .resume = genphy_resume,
361} };
362
363module_phy_driver(smsc_phy_driver);
364
365MODULE_DESCRIPTION("SMSC PHY driver");
366MODULE_AUTHOR("Herbert Valerio Riedel");
367MODULE_LICENSE("GPL");
368
369static struct mdio_device_id __maybe_unused smsc_tbl[] = {
370 { 0x0007c0a0, 0xfffffff0 },
371 { 0x0007c0b0, 0xfffffff0 },
372 { 0x0007c0c0, 0xfffffff0 },
373 { 0x0007c0d0, 0xfffffff0 },
374 { 0x0007c0f0, 0xfffffff0 },
375 { 0x0007c110, 0xfffffff0 },
376 { }
377};
378
379MODULE_DEVICE_TABLE(mdio, smsc_tbl);
1/*
2 * drivers/net/phy/smsc.c
3 *
4 * Driver for SMSC PHYs
5 *
6 * Author: Herbert Valerio Riedel
7 *
8 * Copyright (c) 2006 Herbert Valerio Riedel <hvr@gnu.org>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms of the GNU General Public License as published by the
12 * Free Software Foundation; either version 2 of the License, or (at your
13 * option) any later version.
14 *
15 * Support added for SMSC LAN8187 and LAN8700 by steve.glendinning@shawell.net
16 *
17 */
18
19#include <linux/kernel.h>
20#include <linux/module.h>
21#include <linux/mii.h>
22#include <linux/ethtool.h>
23#include <linux/phy.h>
24#include <linux/netdevice.h>
25#include <linux/smscphy.h>
26
27struct smsc_phy_priv {
28 bool energy_enable;
29};
30
31static int smsc_phy_config_intr(struct phy_device *phydev)
32{
33 int rc = phy_write (phydev, MII_LAN83C185_IM,
34 ((PHY_INTERRUPT_ENABLED == phydev->interrupts)
35 ? MII_LAN83C185_ISF_INT_PHYLIB_EVENTS
36 : 0));
37
38 return rc < 0 ? rc : 0;
39}
40
41static int smsc_phy_ack_interrupt(struct phy_device *phydev)
42{
43 int rc = phy_read (phydev, MII_LAN83C185_ISF);
44
45 return rc < 0 ? rc : 0;
46}
47
48static int smsc_phy_config_init(struct phy_device *phydev)
49{
50 struct smsc_phy_priv *priv = phydev->priv;
51
52 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
53
54 if (rc < 0)
55 return rc;
56
57 if (priv->energy_enable) {
58 /* Enable energy detect mode for this SMSC Transceivers */
59 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
60 rc | MII_LAN83C185_EDPWRDOWN);
61 if (rc < 0)
62 return rc;
63 }
64
65 return smsc_phy_ack_interrupt(phydev);
66}
67
68static int smsc_phy_reset(struct phy_device *phydev)
69{
70 int rc = phy_read(phydev, MII_LAN83C185_SPECIAL_MODES);
71 if (rc < 0)
72 return rc;
73
74 /* If the SMSC PHY is in power down mode, then set it
75 * in all capable mode before using it.
76 */
77 if ((rc & MII_LAN83C185_MODE_MASK) == MII_LAN83C185_MODE_POWERDOWN) {
78 int timeout = 50000;
79
80 /* set "all capable" mode and reset the phy */
81 rc |= MII_LAN83C185_MODE_ALL;
82 phy_write(phydev, MII_LAN83C185_SPECIAL_MODES, rc);
83 phy_write(phydev, MII_BMCR, BMCR_RESET);
84
85 /* wait end of reset (max 500 ms) */
86 do {
87 udelay(10);
88 if (timeout-- == 0)
89 return -1;
90 rc = phy_read(phydev, MII_BMCR);
91 } while (rc & BMCR_RESET);
92 }
93 return 0;
94}
95
96static int lan911x_config_init(struct phy_device *phydev)
97{
98 return smsc_phy_ack_interrupt(phydev);
99}
100
101/*
102 * The LAN87xx suffers from rare absence of the ENERGYON-bit when Ethernet cable
103 * plugs in while LAN87xx is in Energy Detect Power-Down mode. This leads to
104 * unstable detection of plugging in Ethernet cable.
105 * This workaround disables Energy Detect Power-Down mode and waiting for
106 * response on link pulses to detect presence of plugged Ethernet cable.
107 * The Energy Detect Power-Down mode is enabled again in the end of procedure to
108 * save approximately 220 mW of power if cable is unplugged.
109 */
110static int lan87xx_read_status(struct phy_device *phydev)
111{
112 struct smsc_phy_priv *priv = phydev->priv;
113
114 int err = genphy_read_status(phydev);
115
116 if (!phydev->link && priv->energy_enable) {
117 int i;
118
119 /* Disable EDPD to wake up PHY */
120 int rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
121 if (rc < 0)
122 return rc;
123
124 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
125 rc & ~MII_LAN83C185_EDPWRDOWN);
126 if (rc < 0)
127 return rc;
128
129 /* Wait max 640 ms to detect energy */
130 for (i = 0; i < 64; i++) {
131 /* Sleep to allow link test pulses to be sent */
132 msleep(10);
133 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
134 if (rc < 0)
135 return rc;
136 if (rc & MII_LAN83C185_ENERGYON)
137 break;
138 }
139
140 /* Re-enable EDPD */
141 rc = phy_read(phydev, MII_LAN83C185_CTRL_STATUS);
142 if (rc < 0)
143 return rc;
144
145 rc = phy_write(phydev, MII_LAN83C185_CTRL_STATUS,
146 rc | MII_LAN83C185_EDPWRDOWN);
147 if (rc < 0)
148 return rc;
149 }
150
151 return err;
152}
153
154static int smsc_phy_probe(struct phy_device *phydev)
155{
156 struct device *dev = &phydev->mdio.dev;
157 struct device_node *of_node = dev->of_node;
158 struct smsc_phy_priv *priv;
159
160 priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
161 if (!priv)
162 return -ENOMEM;
163
164 priv->energy_enable = true;
165
166 if (of_property_read_bool(of_node, "smsc,disable-energy-detect"))
167 priv->energy_enable = false;
168
169 phydev->priv = priv;
170
171 return 0;
172}
173
174static struct phy_driver smsc_phy_driver[] = {
175{
176 .phy_id = 0x0007c0a0, /* OUI=0x00800f, Model#=0x0a */
177 .phy_id_mask = 0xfffffff0,
178 .name = "SMSC LAN83C185",
179
180 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
181 | SUPPORTED_Asym_Pause),
182 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
183
184 .probe = smsc_phy_probe,
185
186 /* basic functions */
187 .config_aneg = genphy_config_aneg,
188 .read_status = genphy_read_status,
189 .config_init = smsc_phy_config_init,
190 .soft_reset = smsc_phy_reset,
191
192 /* IRQ related */
193 .ack_interrupt = smsc_phy_ack_interrupt,
194 .config_intr = smsc_phy_config_intr,
195
196 .suspend = genphy_suspend,
197 .resume = genphy_resume,
198}, {
199 .phy_id = 0x0007c0b0, /* OUI=0x00800f, Model#=0x0b */
200 .phy_id_mask = 0xfffffff0,
201 .name = "SMSC LAN8187",
202
203 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
204 | SUPPORTED_Asym_Pause),
205 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
206
207 .probe = smsc_phy_probe,
208
209 /* basic functions */
210 .config_aneg = genphy_config_aneg,
211 .read_status = genphy_read_status,
212 .config_init = smsc_phy_config_init,
213 .soft_reset = smsc_phy_reset,
214
215 /* IRQ related */
216 .ack_interrupt = smsc_phy_ack_interrupt,
217 .config_intr = smsc_phy_config_intr,
218
219 .suspend = genphy_suspend,
220 .resume = genphy_resume,
221}, {
222 .phy_id = 0x0007c0c0, /* OUI=0x00800f, Model#=0x0c */
223 .phy_id_mask = 0xfffffff0,
224 .name = "SMSC LAN8700",
225
226 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
227 | SUPPORTED_Asym_Pause),
228 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
229
230 .probe = smsc_phy_probe,
231
232 /* basic functions */
233 .config_aneg = genphy_config_aneg,
234 .read_status = lan87xx_read_status,
235 .config_init = smsc_phy_config_init,
236 .soft_reset = smsc_phy_reset,
237
238 /* IRQ related */
239 .ack_interrupt = smsc_phy_ack_interrupt,
240 .config_intr = smsc_phy_config_intr,
241
242 .suspend = genphy_suspend,
243 .resume = genphy_resume,
244}, {
245 .phy_id = 0x0007c0d0, /* OUI=0x00800f, Model#=0x0d */
246 .phy_id_mask = 0xfffffff0,
247 .name = "SMSC LAN911x Internal PHY",
248
249 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
250 | SUPPORTED_Asym_Pause),
251 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
252
253 .probe = smsc_phy_probe,
254
255 /* basic functions */
256 .config_aneg = genphy_config_aneg,
257 .read_status = genphy_read_status,
258 .config_init = lan911x_config_init,
259
260 /* IRQ related */
261 .ack_interrupt = smsc_phy_ack_interrupt,
262 .config_intr = smsc_phy_config_intr,
263
264 .suspend = genphy_suspend,
265 .resume = genphy_resume,
266}, {
267 .phy_id = 0x0007c0f0, /* OUI=0x00800f, Model#=0x0f */
268 .phy_id_mask = 0xfffffff0,
269 .name = "SMSC LAN8710/LAN8720",
270
271 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
272 | SUPPORTED_Asym_Pause),
273 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
274
275 .probe = smsc_phy_probe,
276
277 /* basic functions */
278 .config_aneg = genphy_config_aneg,
279 .read_status = lan87xx_read_status,
280 .config_init = smsc_phy_config_init,
281 .soft_reset = smsc_phy_reset,
282
283 /* IRQ related */
284 .ack_interrupt = smsc_phy_ack_interrupt,
285 .config_intr = smsc_phy_config_intr,
286
287 .suspend = genphy_suspend,
288 .resume = genphy_resume,
289}, {
290 .phy_id = 0x0007c110,
291 .phy_id_mask = 0xfffffff0,
292 .name = "SMSC LAN8740",
293
294 .features = (PHY_BASIC_FEATURES | SUPPORTED_Pause
295 | SUPPORTED_Asym_Pause),
296 .flags = PHY_HAS_INTERRUPT | PHY_HAS_MAGICANEG,
297
298 .probe = smsc_phy_probe,
299
300 /* basic functions */
301 .config_aneg = genphy_config_aneg,
302 .read_status = lan87xx_read_status,
303 .config_init = smsc_phy_config_init,
304 .soft_reset = smsc_phy_reset,
305
306 /* IRQ related */
307 .ack_interrupt = smsc_phy_ack_interrupt,
308 .config_intr = smsc_phy_config_intr,
309
310 .suspend = genphy_suspend,
311 .resume = genphy_resume,
312} };
313
314module_phy_driver(smsc_phy_driver);
315
316MODULE_DESCRIPTION("SMSC PHY driver");
317MODULE_AUTHOR("Herbert Valerio Riedel");
318MODULE_LICENSE("GPL");
319
320static struct mdio_device_id __maybe_unused smsc_tbl[] = {
321 { 0x0007c0a0, 0xfffffff0 },
322 { 0x0007c0b0, 0xfffffff0 },
323 { 0x0007c0c0, 0xfffffff0 },
324 { 0x0007c0d0, 0xfffffff0 },
325 { 0x0007c0f0, 0xfffffff0 },
326 { 0x0007c110, 0xfffffff0 },
327 { }
328};
329
330MODULE_DEVICE_TABLE(mdio, smsc_tbl);