Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * drivers/base/dd.c - The core device/driver interactions.
4 *
5 * This file contains the (sometimes tricky) code that controls the
6 * interactions between devices and drivers, which primarily includes
7 * driver binding and unbinding.
8 *
9 * All of this code used to exist in drivers/base/bus.c, but was
10 * relocated to here in the name of compartmentalization (since it wasn't
11 * strictly code just for the 'struct bus_type'.
12 *
13 * Copyright (c) 2002-5 Patrick Mochel
14 * Copyright (c) 2002-3 Open Source Development Labs
15 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
16 * Copyright (c) 2007-2009 Novell Inc.
17 */
18
19#include <linux/device.h>
20#include <linux/delay.h>
21#include <linux/dma-mapping.h>
22#include <linux/init.h>
23#include <linux/module.h>
24#include <linux/kthread.h>
25#include <linux/wait.h>
26#include <linux/async.h>
27#include <linux/pm_runtime.h>
28#include <linux/pinctrl/devinfo.h>
29
30#include "base.h"
31#include "power/power.h"
32
33/*
34 * Deferred Probe infrastructure.
35 *
36 * Sometimes driver probe order matters, but the kernel doesn't always have
37 * dependency information which means some drivers will get probed before a
38 * resource it depends on is available. For example, an SDHCI driver may
39 * first need a GPIO line from an i2c GPIO controller before it can be
40 * initialized. If a required resource is not available yet, a driver can
41 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
42 *
43 * Deferred probe maintains two lists of devices, a pending list and an active
44 * list. A driver returning -EPROBE_DEFER causes the device to be added to the
45 * pending list. A successful driver probe will trigger moving all devices
46 * from the pending to the active list so that the workqueue will eventually
47 * retry them.
48 *
49 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
50 * of the (struct device*)->p->deferred_probe pointers are manipulated
51 */
52static DEFINE_MUTEX(deferred_probe_mutex);
53static LIST_HEAD(deferred_probe_pending_list);
54static LIST_HEAD(deferred_probe_active_list);
55static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
56static bool initcalls_done;
57
58/*
59 * In some cases, like suspend to RAM or hibernation, It might be reasonable
60 * to prohibit probing of devices as it could be unsafe.
61 * Once defer_all_probes is true all drivers probes will be forcibly deferred.
62 */
63static bool defer_all_probes;
64
65/*
66 * For initcall_debug, show the deferred probes executed in late_initcall
67 * processing.
68 */
69static void deferred_probe_debug(struct device *dev)
70{
71 ktime_t calltime, delta, rettime;
72 unsigned long long duration;
73
74 printk(KERN_DEBUG "deferred probe %s @ %i\n", dev_name(dev),
75 task_pid_nr(current));
76 calltime = ktime_get();
77 bus_probe_device(dev);
78 rettime = ktime_get();
79 delta = ktime_sub(rettime, calltime);
80 duration = (unsigned long long) ktime_to_ns(delta) >> 10;
81 printk(KERN_DEBUG "deferred probe %s returned after %lld usecs\n",
82 dev_name(dev), duration);
83}
84
85/*
86 * deferred_probe_work_func() - Retry probing devices in the active list.
87 */
88static void deferred_probe_work_func(struct work_struct *work)
89{
90 struct device *dev;
91 struct device_private *private;
92 /*
93 * This block processes every device in the deferred 'active' list.
94 * Each device is removed from the active list and passed to
95 * bus_probe_device() to re-attempt the probe. The loop continues
96 * until every device in the active list is removed and retried.
97 *
98 * Note: Once the device is removed from the list and the mutex is
99 * released, it is possible for the device get freed by another thread
100 * and cause a illegal pointer dereference. This code uses
101 * get/put_device() to ensure the device structure cannot disappear
102 * from under our feet.
103 */
104 mutex_lock(&deferred_probe_mutex);
105 while (!list_empty(&deferred_probe_active_list)) {
106 private = list_first_entry(&deferred_probe_active_list,
107 typeof(*dev->p), deferred_probe);
108 dev = private->device;
109 list_del_init(&private->deferred_probe);
110
111 get_device(dev);
112
113 /*
114 * Drop the mutex while probing each device; the probe path may
115 * manipulate the deferred list
116 */
117 mutex_unlock(&deferred_probe_mutex);
118
119 /*
120 * Force the device to the end of the dpm_list since
121 * the PM code assumes that the order we add things to
122 * the list is a good order for suspend but deferred
123 * probe makes that very unsafe.
124 */
125 device_pm_lock();
126 device_pm_move_last(dev);
127 device_pm_unlock();
128
129 dev_dbg(dev, "Retrying from deferred list\n");
130 if (initcall_debug && !initcalls_done)
131 deferred_probe_debug(dev);
132 else
133 bus_probe_device(dev);
134
135 mutex_lock(&deferred_probe_mutex);
136
137 put_device(dev);
138 }
139 mutex_unlock(&deferred_probe_mutex);
140}
141static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
142
143static void driver_deferred_probe_add(struct device *dev)
144{
145 mutex_lock(&deferred_probe_mutex);
146 if (list_empty(&dev->p->deferred_probe)) {
147 dev_dbg(dev, "Added to deferred list\n");
148 list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
149 }
150 mutex_unlock(&deferred_probe_mutex);
151}
152
153void driver_deferred_probe_del(struct device *dev)
154{
155 mutex_lock(&deferred_probe_mutex);
156 if (!list_empty(&dev->p->deferred_probe)) {
157 dev_dbg(dev, "Removed from deferred list\n");
158 list_del_init(&dev->p->deferred_probe);
159 }
160 mutex_unlock(&deferred_probe_mutex);
161}
162
163static bool driver_deferred_probe_enable = false;
164/**
165 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
166 *
167 * This functions moves all devices from the pending list to the active
168 * list and schedules the deferred probe workqueue to process them. It
169 * should be called anytime a driver is successfully bound to a device.
170 *
171 * Note, there is a race condition in multi-threaded probe. In the case where
172 * more than one device is probing at the same time, it is possible for one
173 * probe to complete successfully while another is about to defer. If the second
174 * depends on the first, then it will get put on the pending list after the
175 * trigger event has already occurred and will be stuck there.
176 *
177 * The atomic 'deferred_trigger_count' is used to determine if a successful
178 * trigger has occurred in the midst of probing a driver. If the trigger count
179 * changes in the midst of a probe, then deferred processing should be triggered
180 * again.
181 */
182static void driver_deferred_probe_trigger(void)
183{
184 if (!driver_deferred_probe_enable)
185 return;
186
187 /*
188 * A successful probe means that all the devices in the pending list
189 * should be triggered to be reprobed. Move all the deferred devices
190 * into the active list so they can be retried by the workqueue
191 */
192 mutex_lock(&deferred_probe_mutex);
193 atomic_inc(&deferred_trigger_count);
194 list_splice_tail_init(&deferred_probe_pending_list,
195 &deferred_probe_active_list);
196 mutex_unlock(&deferred_probe_mutex);
197
198 /*
199 * Kick the re-probe thread. It may already be scheduled, but it is
200 * safe to kick it again.
201 */
202 schedule_work(&deferred_probe_work);
203}
204
205/**
206 * device_block_probing() - Block/defere device's probes
207 *
208 * It will disable probing of devices and defer their probes instead.
209 */
210void device_block_probing(void)
211{
212 defer_all_probes = true;
213 /* sync with probes to avoid races. */
214 wait_for_device_probe();
215}
216
217/**
218 * device_unblock_probing() - Unblock/enable device's probes
219 *
220 * It will restore normal behavior and trigger re-probing of deferred
221 * devices.
222 */
223void device_unblock_probing(void)
224{
225 defer_all_probes = false;
226 driver_deferred_probe_trigger();
227}
228
229/**
230 * deferred_probe_initcall() - Enable probing of deferred devices
231 *
232 * We don't want to get in the way when the bulk of drivers are getting probed.
233 * Instead, this initcall makes sure that deferred probing is delayed until
234 * late_initcall time.
235 */
236static int deferred_probe_initcall(void)
237{
238 driver_deferred_probe_enable = true;
239 driver_deferred_probe_trigger();
240 /* Sort as many dependencies as possible before exiting initcalls */
241 flush_work(&deferred_probe_work);
242 initcalls_done = true;
243 return 0;
244}
245late_initcall(deferred_probe_initcall);
246
247/**
248 * device_is_bound() - Check if device is bound to a driver
249 * @dev: device to check
250 *
251 * Returns true if passed device has already finished probing successfully
252 * against a driver.
253 *
254 * This function must be called with the device lock held.
255 */
256bool device_is_bound(struct device *dev)
257{
258 return dev->p && klist_node_attached(&dev->p->knode_driver);
259}
260
261static void driver_bound(struct device *dev)
262{
263 if (device_is_bound(dev)) {
264 printk(KERN_WARNING "%s: device %s already bound\n",
265 __func__, kobject_name(&dev->kobj));
266 return;
267 }
268
269 pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,
270 __func__, dev_name(dev));
271
272 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
273 device_links_driver_bound(dev);
274
275 device_pm_check_callbacks(dev);
276
277 /*
278 * Make sure the device is no longer in one of the deferred lists and
279 * kick off retrying all pending devices
280 */
281 driver_deferred_probe_del(dev);
282 driver_deferred_probe_trigger();
283
284 if (dev->bus)
285 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
286 BUS_NOTIFY_BOUND_DRIVER, dev);
287
288 kobject_uevent(&dev->kobj, KOBJ_BIND);
289}
290
291static ssize_t coredump_store(struct device *dev, struct device_attribute *attr,
292 const char *buf, size_t count)
293{
294 device_lock(dev);
295 dev->driver->coredump(dev);
296 device_unlock(dev);
297
298 return count;
299}
300static DEVICE_ATTR_WO(coredump);
301
302static int driver_sysfs_add(struct device *dev)
303{
304 int ret;
305
306 if (dev->bus)
307 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
308 BUS_NOTIFY_BIND_DRIVER, dev);
309
310 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
311 kobject_name(&dev->kobj));
312 if (ret)
313 goto fail;
314
315 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
316 "driver");
317 if (ret)
318 goto rm_dev;
319
320 if (!IS_ENABLED(CONFIG_DEV_COREDUMP) || !dev->driver->coredump ||
321 !device_create_file(dev, &dev_attr_coredump))
322 return 0;
323
324 sysfs_remove_link(&dev->kobj, "driver");
325
326rm_dev:
327 sysfs_remove_link(&dev->driver->p->kobj,
328 kobject_name(&dev->kobj));
329
330fail:
331 return ret;
332}
333
334static void driver_sysfs_remove(struct device *dev)
335{
336 struct device_driver *drv = dev->driver;
337
338 if (drv) {
339 if (drv->coredump)
340 device_remove_file(dev, &dev_attr_coredump);
341 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
342 sysfs_remove_link(&dev->kobj, "driver");
343 }
344}
345
346/**
347 * device_bind_driver - bind a driver to one device.
348 * @dev: device.
349 *
350 * Allow manual attachment of a driver to a device.
351 * Caller must have already set @dev->driver.
352 *
353 * Note that this does not modify the bus reference count
354 * nor take the bus's rwsem. Please verify those are accounted
355 * for before calling this. (It is ok to call with no other effort
356 * from a driver's probe() method.)
357 *
358 * This function must be called with the device lock held.
359 */
360int device_bind_driver(struct device *dev)
361{
362 int ret;
363
364 ret = driver_sysfs_add(dev);
365 if (!ret)
366 driver_bound(dev);
367 else if (dev->bus)
368 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
369 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
370 return ret;
371}
372EXPORT_SYMBOL_GPL(device_bind_driver);
373
374static atomic_t probe_count = ATOMIC_INIT(0);
375static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
376
377static void driver_deferred_probe_add_trigger(struct device *dev,
378 int local_trigger_count)
379{
380 driver_deferred_probe_add(dev);
381 /* Did a trigger occur while probing? Need to re-trigger if yes */
382 if (local_trigger_count != atomic_read(&deferred_trigger_count))
383 driver_deferred_probe_trigger();
384}
385
386static int really_probe(struct device *dev, struct device_driver *drv)
387{
388 int ret = -EPROBE_DEFER;
389 int local_trigger_count = atomic_read(&deferred_trigger_count);
390 bool test_remove = IS_ENABLED(CONFIG_DEBUG_TEST_DRIVER_REMOVE) &&
391 !drv->suppress_bind_attrs;
392
393 if (defer_all_probes) {
394 /*
395 * Value of defer_all_probes can be set only by
396 * device_defer_all_probes_enable() which, in turn, will call
397 * wait_for_device_probe() right after that to avoid any races.
398 */
399 dev_dbg(dev, "Driver %s force probe deferral\n", drv->name);
400 driver_deferred_probe_add(dev);
401 return ret;
402 }
403
404 ret = device_links_check_suppliers(dev);
405 if (ret == -EPROBE_DEFER)
406 driver_deferred_probe_add_trigger(dev, local_trigger_count);
407 if (ret)
408 return ret;
409
410 atomic_inc(&probe_count);
411 pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
412 drv->bus->name, __func__, drv->name, dev_name(dev));
413 WARN_ON(!list_empty(&dev->devres_head));
414
415re_probe:
416 dev->driver = drv;
417
418 /* If using pinctrl, bind pins now before probing */
419 ret = pinctrl_bind_pins(dev);
420 if (ret)
421 goto pinctrl_bind_failed;
422
423 ret = dma_configure(dev);
424 if (ret)
425 goto dma_failed;
426
427 if (driver_sysfs_add(dev)) {
428 printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
429 __func__, dev_name(dev));
430 goto probe_failed;
431 }
432
433 if (dev->pm_domain && dev->pm_domain->activate) {
434 ret = dev->pm_domain->activate(dev);
435 if (ret)
436 goto probe_failed;
437 }
438
439 /*
440 * Ensure devices are listed in devices_kset in correct order
441 * It's important to move Dev to the end of devices_kset before
442 * calling .probe, because it could be recursive and parent Dev
443 * should always go first
444 */
445 devices_kset_move_last(dev);
446
447 if (dev->bus->probe) {
448 ret = dev->bus->probe(dev);
449 if (ret)
450 goto probe_failed;
451 } else if (drv->probe) {
452 ret = drv->probe(dev);
453 if (ret)
454 goto probe_failed;
455 }
456
457 if (test_remove) {
458 test_remove = false;
459
460 if (dev->bus->remove)
461 dev->bus->remove(dev);
462 else if (drv->remove)
463 drv->remove(dev);
464
465 devres_release_all(dev);
466 driver_sysfs_remove(dev);
467 dev->driver = NULL;
468 dev_set_drvdata(dev, NULL);
469 if (dev->pm_domain && dev->pm_domain->dismiss)
470 dev->pm_domain->dismiss(dev);
471 pm_runtime_reinit(dev);
472
473 goto re_probe;
474 }
475
476 pinctrl_init_done(dev);
477
478 if (dev->pm_domain && dev->pm_domain->sync)
479 dev->pm_domain->sync(dev);
480
481 driver_bound(dev);
482 ret = 1;
483 pr_debug("bus: '%s': %s: bound device %s to driver %s\n",
484 drv->bus->name, __func__, dev_name(dev), drv->name);
485 goto done;
486
487probe_failed:
488 dma_deconfigure(dev);
489dma_failed:
490 if (dev->bus)
491 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
492 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
493pinctrl_bind_failed:
494 device_links_no_driver(dev);
495 devres_release_all(dev);
496 driver_sysfs_remove(dev);
497 dev->driver = NULL;
498 dev_set_drvdata(dev, NULL);
499 if (dev->pm_domain && dev->pm_domain->dismiss)
500 dev->pm_domain->dismiss(dev);
501 pm_runtime_reinit(dev);
502 dev_pm_set_driver_flags(dev, 0);
503
504 switch (ret) {
505 case -EPROBE_DEFER:
506 /* Driver requested deferred probing */
507 dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);
508 driver_deferred_probe_add_trigger(dev, local_trigger_count);
509 break;
510 case -ENODEV:
511 case -ENXIO:
512 pr_debug("%s: probe of %s rejects match %d\n",
513 drv->name, dev_name(dev), ret);
514 break;
515 default:
516 /* driver matched but the probe failed */
517 printk(KERN_WARNING
518 "%s: probe of %s failed with error %d\n",
519 drv->name, dev_name(dev), ret);
520 }
521 /*
522 * Ignore errors returned by ->probe so that the next driver can try
523 * its luck.
524 */
525 ret = 0;
526done:
527 atomic_dec(&probe_count);
528 wake_up(&probe_waitqueue);
529 return ret;
530}
531
532/**
533 * driver_probe_done
534 * Determine if the probe sequence is finished or not.
535 *
536 * Should somehow figure out how to use a semaphore, not an atomic variable...
537 */
538int driver_probe_done(void)
539{
540 pr_debug("%s: probe_count = %d\n", __func__,
541 atomic_read(&probe_count));
542 if (atomic_read(&probe_count))
543 return -EBUSY;
544 return 0;
545}
546
547/**
548 * wait_for_device_probe
549 * Wait for device probing to be completed.
550 */
551void wait_for_device_probe(void)
552{
553 /* wait for the deferred probe workqueue to finish */
554 flush_work(&deferred_probe_work);
555
556 /* wait for the known devices to complete their probing */
557 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
558 async_synchronize_full();
559}
560EXPORT_SYMBOL_GPL(wait_for_device_probe);
561
562/**
563 * driver_probe_device - attempt to bind device & driver together
564 * @drv: driver to bind a device to
565 * @dev: device to try to bind to the driver
566 *
567 * This function returns -ENODEV if the device is not registered,
568 * 1 if the device is bound successfully and 0 otherwise.
569 *
570 * This function must be called with @dev lock held. When called for a
571 * USB interface, @dev->parent lock must be held as well.
572 *
573 * If the device has a parent, runtime-resume the parent before driver probing.
574 */
575int driver_probe_device(struct device_driver *drv, struct device *dev)
576{
577 int ret = 0;
578
579 if (!device_is_registered(dev))
580 return -ENODEV;
581
582 pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
583 drv->bus->name, __func__, dev_name(dev), drv->name);
584
585 pm_runtime_get_suppliers(dev);
586 if (dev->parent)
587 pm_runtime_get_sync(dev->parent);
588
589 pm_runtime_barrier(dev);
590 ret = really_probe(dev, drv);
591 pm_request_idle(dev);
592
593 if (dev->parent)
594 pm_runtime_put(dev->parent);
595
596 pm_runtime_put_suppliers(dev);
597 return ret;
598}
599
600bool driver_allows_async_probing(struct device_driver *drv)
601{
602 switch (drv->probe_type) {
603 case PROBE_PREFER_ASYNCHRONOUS:
604 return true;
605
606 case PROBE_FORCE_SYNCHRONOUS:
607 return false;
608
609 default:
610 if (module_requested_async_probing(drv->owner))
611 return true;
612
613 return false;
614 }
615}
616
617struct device_attach_data {
618 struct device *dev;
619
620 /*
621 * Indicates whether we are are considering asynchronous probing or
622 * not. Only initial binding after device or driver registration
623 * (including deferral processing) may be done asynchronously, the
624 * rest is always synchronous, as we expect it is being done by
625 * request from userspace.
626 */
627 bool check_async;
628
629 /*
630 * Indicates if we are binding synchronous or asynchronous drivers.
631 * When asynchronous probing is enabled we'll execute 2 passes
632 * over drivers: first pass doing synchronous probing and second
633 * doing asynchronous probing (if synchronous did not succeed -
634 * most likely because there was no driver requiring synchronous
635 * probing - and we found asynchronous driver during first pass).
636 * The 2 passes are done because we can't shoot asynchronous
637 * probe for given device and driver from bus_for_each_drv() since
638 * driver pointer is not guaranteed to stay valid once
639 * bus_for_each_drv() iterates to the next driver on the bus.
640 */
641 bool want_async;
642
643 /*
644 * We'll set have_async to 'true' if, while scanning for matching
645 * driver, we'll encounter one that requests asynchronous probing.
646 */
647 bool have_async;
648};
649
650static int __device_attach_driver(struct device_driver *drv, void *_data)
651{
652 struct device_attach_data *data = _data;
653 struct device *dev = data->dev;
654 bool async_allowed;
655 int ret;
656
657 /*
658 * Check if device has already been claimed. This may
659 * happen with driver loading, device discovery/registration,
660 * and deferred probe processing happens all at once with
661 * multiple threads.
662 */
663 if (dev->driver)
664 return -EBUSY;
665
666 ret = driver_match_device(drv, dev);
667 if (ret == 0) {
668 /* no match */
669 return 0;
670 } else if (ret == -EPROBE_DEFER) {
671 dev_dbg(dev, "Device match requests probe deferral\n");
672 driver_deferred_probe_add(dev);
673 } else if (ret < 0) {
674 dev_dbg(dev, "Bus failed to match device: %d", ret);
675 return ret;
676 } /* ret > 0 means positive match */
677
678 async_allowed = driver_allows_async_probing(drv);
679
680 if (async_allowed)
681 data->have_async = true;
682
683 if (data->check_async && async_allowed != data->want_async)
684 return 0;
685
686 return driver_probe_device(drv, dev);
687}
688
689static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
690{
691 struct device *dev = _dev;
692 struct device_attach_data data = {
693 .dev = dev,
694 .check_async = true,
695 .want_async = true,
696 };
697
698 device_lock(dev);
699
700 if (dev->parent)
701 pm_runtime_get_sync(dev->parent);
702
703 bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
704 dev_dbg(dev, "async probe completed\n");
705
706 pm_request_idle(dev);
707
708 if (dev->parent)
709 pm_runtime_put(dev->parent);
710
711 device_unlock(dev);
712
713 put_device(dev);
714}
715
716static int __device_attach(struct device *dev, bool allow_async)
717{
718 int ret = 0;
719
720 device_lock(dev);
721 if (dev->driver) {
722 if (device_is_bound(dev)) {
723 ret = 1;
724 goto out_unlock;
725 }
726 ret = device_bind_driver(dev);
727 if (ret == 0)
728 ret = 1;
729 else {
730 dev->driver = NULL;
731 ret = 0;
732 }
733 } else {
734 struct device_attach_data data = {
735 .dev = dev,
736 .check_async = allow_async,
737 .want_async = false,
738 };
739
740 if (dev->parent)
741 pm_runtime_get_sync(dev->parent);
742
743 ret = bus_for_each_drv(dev->bus, NULL, &data,
744 __device_attach_driver);
745 if (!ret && allow_async && data.have_async) {
746 /*
747 * If we could not find appropriate driver
748 * synchronously and we are allowed to do
749 * async probes and there are drivers that
750 * want to probe asynchronously, we'll
751 * try them.
752 */
753 dev_dbg(dev, "scheduling asynchronous probe\n");
754 get_device(dev);
755 async_schedule(__device_attach_async_helper, dev);
756 } else {
757 pm_request_idle(dev);
758 }
759
760 if (dev->parent)
761 pm_runtime_put(dev->parent);
762 }
763out_unlock:
764 device_unlock(dev);
765 return ret;
766}
767
768/**
769 * device_attach - try to attach device to a driver.
770 * @dev: device.
771 *
772 * Walk the list of drivers that the bus has and call
773 * driver_probe_device() for each pair. If a compatible
774 * pair is found, break out and return.
775 *
776 * Returns 1 if the device was bound to a driver;
777 * 0 if no matching driver was found;
778 * -ENODEV if the device is not registered.
779 *
780 * When called for a USB interface, @dev->parent lock must be held.
781 */
782int device_attach(struct device *dev)
783{
784 return __device_attach(dev, false);
785}
786EXPORT_SYMBOL_GPL(device_attach);
787
788void device_initial_probe(struct device *dev)
789{
790 __device_attach(dev, true);
791}
792
793static int __driver_attach(struct device *dev, void *data)
794{
795 struct device_driver *drv = data;
796 int ret;
797
798 /*
799 * Lock device and try to bind to it. We drop the error
800 * here and always return 0, because we need to keep trying
801 * to bind to devices and some drivers will return an error
802 * simply if it didn't support the device.
803 *
804 * driver_probe_device() will spit a warning if there
805 * is an error.
806 */
807
808 ret = driver_match_device(drv, dev);
809 if (ret == 0) {
810 /* no match */
811 return 0;
812 } else if (ret == -EPROBE_DEFER) {
813 dev_dbg(dev, "Device match requests probe deferral\n");
814 driver_deferred_probe_add(dev);
815 } else if (ret < 0) {
816 dev_dbg(dev, "Bus failed to match device: %d", ret);
817 return ret;
818 } /* ret > 0 means positive match */
819
820 if (dev->parent) /* Needed for USB */
821 device_lock(dev->parent);
822 device_lock(dev);
823 if (!dev->driver)
824 driver_probe_device(drv, dev);
825 device_unlock(dev);
826 if (dev->parent)
827 device_unlock(dev->parent);
828
829 return 0;
830}
831
832/**
833 * driver_attach - try to bind driver to devices.
834 * @drv: driver.
835 *
836 * Walk the list of devices that the bus has on it and try to
837 * match the driver with each one. If driver_probe_device()
838 * returns 0 and the @dev->driver is set, we've found a
839 * compatible pair.
840 */
841int driver_attach(struct device_driver *drv)
842{
843 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
844}
845EXPORT_SYMBOL_GPL(driver_attach);
846
847/*
848 * __device_release_driver() must be called with @dev lock held.
849 * When called for a USB interface, @dev->parent lock must be held as well.
850 */
851static void __device_release_driver(struct device *dev, struct device *parent)
852{
853 struct device_driver *drv;
854
855 drv = dev->driver;
856 if (drv) {
857 if (driver_allows_async_probing(drv))
858 async_synchronize_full();
859
860 while (device_links_busy(dev)) {
861 device_unlock(dev);
862 if (parent)
863 device_unlock(parent);
864
865 device_links_unbind_consumers(dev);
866 if (parent)
867 device_lock(parent);
868
869 device_lock(dev);
870 /*
871 * A concurrent invocation of the same function might
872 * have released the driver successfully while this one
873 * was waiting, so check for that.
874 */
875 if (dev->driver != drv)
876 return;
877 }
878
879 pm_runtime_get_sync(dev);
880 pm_runtime_clean_up_links(dev);
881
882 driver_sysfs_remove(dev);
883
884 if (dev->bus)
885 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
886 BUS_NOTIFY_UNBIND_DRIVER,
887 dev);
888
889 pm_runtime_put_sync(dev);
890
891 if (dev->bus && dev->bus->remove)
892 dev->bus->remove(dev);
893 else if (drv->remove)
894 drv->remove(dev);
895
896 device_links_driver_cleanup(dev);
897 dma_deconfigure(dev);
898
899 devres_release_all(dev);
900 dev->driver = NULL;
901 dev_set_drvdata(dev, NULL);
902 if (dev->pm_domain && dev->pm_domain->dismiss)
903 dev->pm_domain->dismiss(dev);
904 pm_runtime_reinit(dev);
905 dev_pm_set_driver_flags(dev, 0);
906
907 klist_remove(&dev->p->knode_driver);
908 device_pm_check_callbacks(dev);
909 if (dev->bus)
910 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
911 BUS_NOTIFY_UNBOUND_DRIVER,
912 dev);
913
914 kobject_uevent(&dev->kobj, KOBJ_UNBIND);
915 }
916}
917
918void device_release_driver_internal(struct device *dev,
919 struct device_driver *drv,
920 struct device *parent)
921{
922 if (parent)
923 device_lock(parent);
924
925 device_lock(dev);
926 if (!drv || drv == dev->driver)
927 __device_release_driver(dev, parent);
928
929 device_unlock(dev);
930 if (parent)
931 device_unlock(parent);
932}
933
934/**
935 * device_release_driver - manually detach device from driver.
936 * @dev: device.
937 *
938 * Manually detach device from driver.
939 * When called for a USB interface, @dev->parent lock must be held.
940 *
941 * If this function is to be called with @dev->parent lock held, ensure that
942 * the device's consumers are unbound in advance or that their locks can be
943 * acquired under the @dev->parent lock.
944 */
945void device_release_driver(struct device *dev)
946{
947 /*
948 * If anyone calls device_release_driver() recursively from
949 * within their ->remove callback for the same device, they
950 * will deadlock right here.
951 */
952 device_release_driver_internal(dev, NULL, NULL);
953}
954EXPORT_SYMBOL_GPL(device_release_driver);
955
956/**
957 * driver_detach - detach driver from all devices it controls.
958 * @drv: driver.
959 */
960void driver_detach(struct device_driver *drv)
961{
962 struct device_private *dev_prv;
963 struct device *dev;
964
965 for (;;) {
966 spin_lock(&drv->p->klist_devices.k_lock);
967 if (list_empty(&drv->p->klist_devices.k_list)) {
968 spin_unlock(&drv->p->klist_devices.k_lock);
969 break;
970 }
971 dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
972 struct device_private,
973 knode_driver.n_node);
974 dev = dev_prv->device;
975 get_device(dev);
976 spin_unlock(&drv->p->klist_devices.k_lock);
977 device_release_driver_internal(dev, drv, dev->parent);
978 put_device(dev);
979 }
980}
1/*
2 * drivers/base/dd.c - The core device/driver interactions.
3 *
4 * This file contains the (sometimes tricky) code that controls the
5 * interactions between devices and drivers, which primarily includes
6 * driver binding and unbinding.
7 *
8 * All of this code used to exist in drivers/base/bus.c, but was
9 * relocated to here in the name of compartmentalization (since it wasn't
10 * strictly code just for the 'struct bus_type'.
11 *
12 * Copyright (c) 2002-5 Patrick Mochel
13 * Copyright (c) 2002-3 Open Source Development Labs
14 * Copyright (c) 2007-2009 Greg Kroah-Hartman <gregkh@suse.de>
15 * Copyright (c) 2007-2009 Novell Inc.
16 *
17 * This file is released under the GPLv2
18 */
19
20#include <linux/device.h>
21#include <linux/delay.h>
22#include <linux/module.h>
23#include <linux/kthread.h>
24#include <linux/wait.h>
25#include <linux/async.h>
26#include <linux/pm_runtime.h>
27#include <linux/pinctrl/devinfo.h>
28
29#include "base.h"
30#include "power/power.h"
31
32/*
33 * Deferred Probe infrastructure.
34 *
35 * Sometimes driver probe order matters, but the kernel doesn't always have
36 * dependency information which means some drivers will get probed before a
37 * resource it depends on is available. For example, an SDHCI driver may
38 * first need a GPIO line from an i2c GPIO controller before it can be
39 * initialized. If a required resource is not available yet, a driver can
40 * request probing to be deferred by returning -EPROBE_DEFER from its probe hook
41 *
42 * Deferred probe maintains two lists of devices, a pending list and an active
43 * list. A driver returning -EPROBE_DEFER causes the device to be added to the
44 * pending list. A successful driver probe will trigger moving all devices
45 * from the pending to the active list so that the workqueue will eventually
46 * retry them.
47 *
48 * The deferred_probe_mutex must be held any time the deferred_probe_*_list
49 * of the (struct device*)->p->deferred_probe pointers are manipulated
50 */
51static DEFINE_MUTEX(deferred_probe_mutex);
52static LIST_HEAD(deferred_probe_pending_list);
53static LIST_HEAD(deferred_probe_active_list);
54static struct workqueue_struct *deferred_wq;
55static atomic_t deferred_trigger_count = ATOMIC_INIT(0);
56
57/*
58 * In some cases, like suspend to RAM or hibernation, It might be reasonable
59 * to prohibit probing of devices as it could be unsafe.
60 * Once defer_all_probes is true all drivers probes will be forcibly deferred.
61 */
62static bool defer_all_probes;
63
64/*
65 * deferred_probe_work_func() - Retry probing devices in the active list.
66 */
67static void deferred_probe_work_func(struct work_struct *work)
68{
69 struct device *dev;
70 struct device_private *private;
71 /*
72 * This block processes every device in the deferred 'active' list.
73 * Each device is removed from the active list and passed to
74 * bus_probe_device() to re-attempt the probe. The loop continues
75 * until every device in the active list is removed and retried.
76 *
77 * Note: Once the device is removed from the list and the mutex is
78 * released, it is possible for the device get freed by another thread
79 * and cause a illegal pointer dereference. This code uses
80 * get/put_device() to ensure the device structure cannot disappear
81 * from under our feet.
82 */
83 mutex_lock(&deferred_probe_mutex);
84 while (!list_empty(&deferred_probe_active_list)) {
85 private = list_first_entry(&deferred_probe_active_list,
86 typeof(*dev->p), deferred_probe);
87 dev = private->device;
88 list_del_init(&private->deferred_probe);
89
90 get_device(dev);
91
92 /*
93 * Drop the mutex while probing each device; the probe path may
94 * manipulate the deferred list
95 */
96 mutex_unlock(&deferred_probe_mutex);
97
98 /*
99 * Force the device to the end of the dpm_list since
100 * the PM code assumes that the order we add things to
101 * the list is a good order for suspend but deferred
102 * probe makes that very unsafe.
103 */
104 device_pm_lock();
105 device_pm_move_last(dev);
106 device_pm_unlock();
107
108 dev_dbg(dev, "Retrying from deferred list\n");
109 bus_probe_device(dev);
110
111 mutex_lock(&deferred_probe_mutex);
112
113 put_device(dev);
114 }
115 mutex_unlock(&deferred_probe_mutex);
116}
117static DECLARE_WORK(deferred_probe_work, deferred_probe_work_func);
118
119static void driver_deferred_probe_add(struct device *dev)
120{
121 mutex_lock(&deferred_probe_mutex);
122 if (list_empty(&dev->p->deferred_probe)) {
123 dev_dbg(dev, "Added to deferred list\n");
124 list_add_tail(&dev->p->deferred_probe, &deferred_probe_pending_list);
125 }
126 mutex_unlock(&deferred_probe_mutex);
127}
128
129void driver_deferred_probe_del(struct device *dev)
130{
131 mutex_lock(&deferred_probe_mutex);
132 if (!list_empty(&dev->p->deferred_probe)) {
133 dev_dbg(dev, "Removed from deferred list\n");
134 list_del_init(&dev->p->deferred_probe);
135 }
136 mutex_unlock(&deferred_probe_mutex);
137}
138
139static bool driver_deferred_probe_enable = false;
140/**
141 * driver_deferred_probe_trigger() - Kick off re-probing deferred devices
142 *
143 * This functions moves all devices from the pending list to the active
144 * list and schedules the deferred probe workqueue to process them. It
145 * should be called anytime a driver is successfully bound to a device.
146 *
147 * Note, there is a race condition in multi-threaded probe. In the case where
148 * more than one device is probing at the same time, it is possible for one
149 * probe to complete successfully while another is about to defer. If the second
150 * depends on the first, then it will get put on the pending list after the
151 * trigger event has already occurred and will be stuck there.
152 *
153 * The atomic 'deferred_trigger_count' is used to determine if a successful
154 * trigger has occurred in the midst of probing a driver. If the trigger count
155 * changes in the midst of a probe, then deferred processing should be triggered
156 * again.
157 */
158static void driver_deferred_probe_trigger(void)
159{
160 if (!driver_deferred_probe_enable)
161 return;
162
163 /*
164 * A successful probe means that all the devices in the pending list
165 * should be triggered to be reprobed. Move all the deferred devices
166 * into the active list so they can be retried by the workqueue
167 */
168 mutex_lock(&deferred_probe_mutex);
169 atomic_inc(&deferred_trigger_count);
170 list_splice_tail_init(&deferred_probe_pending_list,
171 &deferred_probe_active_list);
172 mutex_unlock(&deferred_probe_mutex);
173
174 /*
175 * Kick the re-probe thread. It may already be scheduled, but it is
176 * safe to kick it again.
177 */
178 queue_work(deferred_wq, &deferred_probe_work);
179}
180
181/**
182 * device_block_probing() - Block/defere device's probes
183 *
184 * It will disable probing of devices and defer their probes instead.
185 */
186void device_block_probing(void)
187{
188 defer_all_probes = true;
189 /* sync with probes to avoid races. */
190 wait_for_device_probe();
191}
192
193/**
194 * device_unblock_probing() - Unblock/enable device's probes
195 *
196 * It will restore normal behavior and trigger re-probing of deferred
197 * devices.
198 */
199void device_unblock_probing(void)
200{
201 defer_all_probes = false;
202 driver_deferred_probe_trigger();
203}
204
205/**
206 * deferred_probe_initcall() - Enable probing of deferred devices
207 *
208 * We don't want to get in the way when the bulk of drivers are getting probed.
209 * Instead, this initcall makes sure that deferred probing is delayed until
210 * late_initcall time.
211 */
212static int deferred_probe_initcall(void)
213{
214 deferred_wq = create_singlethread_workqueue("deferwq");
215 if (WARN_ON(!deferred_wq))
216 return -ENOMEM;
217
218 driver_deferred_probe_enable = true;
219 driver_deferred_probe_trigger();
220 /* Sort as many dependencies as possible before exiting initcalls */
221 flush_workqueue(deferred_wq);
222 return 0;
223}
224late_initcall(deferred_probe_initcall);
225
226/**
227 * device_is_bound() - Check if device is bound to a driver
228 * @dev: device to check
229 *
230 * Returns true if passed device has already finished probing successfully
231 * against a driver.
232 *
233 * This function must be called with the device lock held.
234 */
235bool device_is_bound(struct device *dev)
236{
237 return dev->p && klist_node_attached(&dev->p->knode_driver);
238}
239
240static void driver_bound(struct device *dev)
241{
242 if (device_is_bound(dev)) {
243 printk(KERN_WARNING "%s: device %s already bound\n",
244 __func__, kobject_name(&dev->kobj));
245 return;
246 }
247
248 pr_debug("driver: '%s': %s: bound to device '%s'\n", dev->driver->name,
249 __func__, dev_name(dev));
250
251 klist_add_tail(&dev->p->knode_driver, &dev->driver->p->klist_devices);
252
253 device_pm_check_callbacks(dev);
254
255 /*
256 * Make sure the device is no longer in one of the deferred lists and
257 * kick off retrying all pending devices
258 */
259 driver_deferred_probe_del(dev);
260 driver_deferred_probe_trigger();
261
262 if (dev->bus)
263 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
264 BUS_NOTIFY_BOUND_DRIVER, dev);
265}
266
267static int driver_sysfs_add(struct device *dev)
268{
269 int ret;
270
271 if (dev->bus)
272 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
273 BUS_NOTIFY_BIND_DRIVER, dev);
274
275 ret = sysfs_create_link(&dev->driver->p->kobj, &dev->kobj,
276 kobject_name(&dev->kobj));
277 if (ret == 0) {
278 ret = sysfs_create_link(&dev->kobj, &dev->driver->p->kobj,
279 "driver");
280 if (ret)
281 sysfs_remove_link(&dev->driver->p->kobj,
282 kobject_name(&dev->kobj));
283 }
284 return ret;
285}
286
287static void driver_sysfs_remove(struct device *dev)
288{
289 struct device_driver *drv = dev->driver;
290
291 if (drv) {
292 sysfs_remove_link(&drv->p->kobj, kobject_name(&dev->kobj));
293 sysfs_remove_link(&dev->kobj, "driver");
294 }
295}
296
297/**
298 * device_bind_driver - bind a driver to one device.
299 * @dev: device.
300 *
301 * Allow manual attachment of a driver to a device.
302 * Caller must have already set @dev->driver.
303 *
304 * Note that this does not modify the bus reference count
305 * nor take the bus's rwsem. Please verify those are accounted
306 * for before calling this. (It is ok to call with no other effort
307 * from a driver's probe() method.)
308 *
309 * This function must be called with the device lock held.
310 */
311int device_bind_driver(struct device *dev)
312{
313 int ret;
314
315 ret = driver_sysfs_add(dev);
316 if (!ret)
317 driver_bound(dev);
318 else if (dev->bus)
319 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
320 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
321 return ret;
322}
323EXPORT_SYMBOL_GPL(device_bind_driver);
324
325static atomic_t probe_count = ATOMIC_INIT(0);
326static DECLARE_WAIT_QUEUE_HEAD(probe_waitqueue);
327
328static int really_probe(struct device *dev, struct device_driver *drv)
329{
330 int ret = -EPROBE_DEFER;
331 int local_trigger_count = atomic_read(&deferred_trigger_count);
332
333 if (defer_all_probes) {
334 /*
335 * Value of defer_all_probes can be set only by
336 * device_defer_all_probes_enable() which, in turn, will call
337 * wait_for_device_probe() right after that to avoid any races.
338 */
339 dev_dbg(dev, "Driver %s force probe deferral\n", drv->name);
340 driver_deferred_probe_add(dev);
341 return ret;
342 }
343
344 atomic_inc(&probe_count);
345 pr_debug("bus: '%s': %s: probing driver %s with device %s\n",
346 drv->bus->name, __func__, drv->name, dev_name(dev));
347 WARN_ON(!list_empty(&dev->devres_head));
348
349 dev->driver = drv;
350
351 /* If using pinctrl, bind pins now before probing */
352 ret = pinctrl_bind_pins(dev);
353 if (ret)
354 goto pinctrl_bind_failed;
355
356 if (driver_sysfs_add(dev)) {
357 printk(KERN_ERR "%s: driver_sysfs_add(%s) failed\n",
358 __func__, dev_name(dev));
359 goto probe_failed;
360 }
361
362 if (dev->pm_domain && dev->pm_domain->activate) {
363 ret = dev->pm_domain->activate(dev);
364 if (ret)
365 goto probe_failed;
366 }
367
368 /*
369 * Ensure devices are listed in devices_kset in correct order
370 * It's important to move Dev to the end of devices_kset before
371 * calling .probe, because it could be recursive and parent Dev
372 * should always go first
373 */
374 devices_kset_move_last(dev);
375
376 if (dev->bus->probe) {
377 ret = dev->bus->probe(dev);
378 if (ret)
379 goto probe_failed;
380 } else if (drv->probe) {
381 ret = drv->probe(dev);
382 if (ret)
383 goto probe_failed;
384 }
385
386 pinctrl_init_done(dev);
387
388 if (dev->pm_domain && dev->pm_domain->sync)
389 dev->pm_domain->sync(dev);
390
391 driver_bound(dev);
392 ret = 1;
393 pr_debug("bus: '%s': %s: bound device %s to driver %s\n",
394 drv->bus->name, __func__, dev_name(dev), drv->name);
395 goto done;
396
397probe_failed:
398 if (dev->bus)
399 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
400 BUS_NOTIFY_DRIVER_NOT_BOUND, dev);
401pinctrl_bind_failed:
402 devres_release_all(dev);
403 driver_sysfs_remove(dev);
404 dev->driver = NULL;
405 dev_set_drvdata(dev, NULL);
406 if (dev->pm_domain && dev->pm_domain->dismiss)
407 dev->pm_domain->dismiss(dev);
408 pm_runtime_reinit(dev);
409
410 switch (ret) {
411 case -EPROBE_DEFER:
412 /* Driver requested deferred probing */
413 dev_dbg(dev, "Driver %s requests probe deferral\n", drv->name);
414 driver_deferred_probe_add(dev);
415 /* Did a trigger occur while probing? Need to re-trigger if yes */
416 if (local_trigger_count != atomic_read(&deferred_trigger_count))
417 driver_deferred_probe_trigger();
418 break;
419 case -ENODEV:
420 case -ENXIO:
421 pr_debug("%s: probe of %s rejects match %d\n",
422 drv->name, dev_name(dev), ret);
423 break;
424 default:
425 /* driver matched but the probe failed */
426 printk(KERN_WARNING
427 "%s: probe of %s failed with error %d\n",
428 drv->name, dev_name(dev), ret);
429 }
430 /*
431 * Ignore errors returned by ->probe so that the next driver can try
432 * its luck.
433 */
434 ret = 0;
435done:
436 atomic_dec(&probe_count);
437 wake_up(&probe_waitqueue);
438 return ret;
439}
440
441/**
442 * driver_probe_done
443 * Determine if the probe sequence is finished or not.
444 *
445 * Should somehow figure out how to use a semaphore, not an atomic variable...
446 */
447int driver_probe_done(void)
448{
449 pr_debug("%s: probe_count = %d\n", __func__,
450 atomic_read(&probe_count));
451 if (atomic_read(&probe_count))
452 return -EBUSY;
453 return 0;
454}
455
456/**
457 * wait_for_device_probe
458 * Wait for device probing to be completed.
459 */
460void wait_for_device_probe(void)
461{
462 /* wait for the deferred probe workqueue to finish */
463 if (driver_deferred_probe_enable)
464 flush_workqueue(deferred_wq);
465
466 /* wait for the known devices to complete their probing */
467 wait_event(probe_waitqueue, atomic_read(&probe_count) == 0);
468 async_synchronize_full();
469}
470EXPORT_SYMBOL_GPL(wait_for_device_probe);
471
472/**
473 * driver_probe_device - attempt to bind device & driver together
474 * @drv: driver to bind a device to
475 * @dev: device to try to bind to the driver
476 *
477 * This function returns -ENODEV if the device is not registered,
478 * 1 if the device is bound successfully and 0 otherwise.
479 *
480 * This function must be called with @dev lock held. When called for a
481 * USB interface, @dev->parent lock must be held as well.
482 *
483 * If the device has a parent, runtime-resume the parent before driver probing.
484 */
485int driver_probe_device(struct device_driver *drv, struct device *dev)
486{
487 int ret = 0;
488
489 if (!device_is_registered(dev))
490 return -ENODEV;
491
492 pr_debug("bus: '%s': %s: matched device %s with driver %s\n",
493 drv->bus->name, __func__, dev_name(dev), drv->name);
494
495 if (dev->parent)
496 pm_runtime_get_sync(dev->parent);
497
498 pm_runtime_barrier(dev);
499 ret = really_probe(dev, drv);
500 pm_request_idle(dev);
501
502 if (dev->parent)
503 pm_runtime_put(dev->parent);
504
505 return ret;
506}
507
508bool driver_allows_async_probing(struct device_driver *drv)
509{
510 switch (drv->probe_type) {
511 case PROBE_PREFER_ASYNCHRONOUS:
512 return true;
513
514 case PROBE_FORCE_SYNCHRONOUS:
515 return false;
516
517 default:
518 if (module_requested_async_probing(drv->owner))
519 return true;
520
521 return false;
522 }
523}
524
525struct device_attach_data {
526 struct device *dev;
527
528 /*
529 * Indicates whether we are are considering asynchronous probing or
530 * not. Only initial binding after device or driver registration
531 * (including deferral processing) may be done asynchronously, the
532 * rest is always synchronous, as we expect it is being done by
533 * request from userspace.
534 */
535 bool check_async;
536
537 /*
538 * Indicates if we are binding synchronous or asynchronous drivers.
539 * When asynchronous probing is enabled we'll execute 2 passes
540 * over drivers: first pass doing synchronous probing and second
541 * doing asynchronous probing (if synchronous did not succeed -
542 * most likely because there was no driver requiring synchronous
543 * probing - and we found asynchronous driver during first pass).
544 * The 2 passes are done because we can't shoot asynchronous
545 * probe for given device and driver from bus_for_each_drv() since
546 * driver pointer is not guaranteed to stay valid once
547 * bus_for_each_drv() iterates to the next driver on the bus.
548 */
549 bool want_async;
550
551 /*
552 * We'll set have_async to 'true' if, while scanning for matching
553 * driver, we'll encounter one that requests asynchronous probing.
554 */
555 bool have_async;
556};
557
558static int __device_attach_driver(struct device_driver *drv, void *_data)
559{
560 struct device_attach_data *data = _data;
561 struct device *dev = data->dev;
562 bool async_allowed;
563 int ret;
564
565 /*
566 * Check if device has already been claimed. This may
567 * happen with driver loading, device discovery/registration,
568 * and deferred probe processing happens all at once with
569 * multiple threads.
570 */
571 if (dev->driver)
572 return -EBUSY;
573
574 ret = driver_match_device(drv, dev);
575 if (ret == 0) {
576 /* no match */
577 return 0;
578 } else if (ret == -EPROBE_DEFER) {
579 dev_dbg(dev, "Device match requests probe deferral\n");
580 driver_deferred_probe_add(dev);
581 } else if (ret < 0) {
582 dev_dbg(dev, "Bus failed to match device: %d", ret);
583 return ret;
584 } /* ret > 0 means positive match */
585
586 async_allowed = driver_allows_async_probing(drv);
587
588 if (async_allowed)
589 data->have_async = true;
590
591 if (data->check_async && async_allowed != data->want_async)
592 return 0;
593
594 return driver_probe_device(drv, dev);
595}
596
597static void __device_attach_async_helper(void *_dev, async_cookie_t cookie)
598{
599 struct device *dev = _dev;
600 struct device_attach_data data = {
601 .dev = dev,
602 .check_async = true,
603 .want_async = true,
604 };
605
606 device_lock(dev);
607
608 if (dev->parent)
609 pm_runtime_get_sync(dev->parent);
610
611 bus_for_each_drv(dev->bus, NULL, &data, __device_attach_driver);
612 dev_dbg(dev, "async probe completed\n");
613
614 pm_request_idle(dev);
615
616 if (dev->parent)
617 pm_runtime_put(dev->parent);
618
619 device_unlock(dev);
620
621 put_device(dev);
622}
623
624static int __device_attach(struct device *dev, bool allow_async)
625{
626 int ret = 0;
627
628 device_lock(dev);
629 if (dev->driver) {
630 if (device_is_bound(dev)) {
631 ret = 1;
632 goto out_unlock;
633 }
634 ret = device_bind_driver(dev);
635 if (ret == 0)
636 ret = 1;
637 else {
638 dev->driver = NULL;
639 ret = 0;
640 }
641 } else {
642 struct device_attach_data data = {
643 .dev = dev,
644 .check_async = allow_async,
645 .want_async = false,
646 };
647
648 if (dev->parent)
649 pm_runtime_get_sync(dev->parent);
650
651 ret = bus_for_each_drv(dev->bus, NULL, &data,
652 __device_attach_driver);
653 if (!ret && allow_async && data.have_async) {
654 /*
655 * If we could not find appropriate driver
656 * synchronously and we are allowed to do
657 * async probes and there are drivers that
658 * want to probe asynchronously, we'll
659 * try them.
660 */
661 dev_dbg(dev, "scheduling asynchronous probe\n");
662 get_device(dev);
663 async_schedule(__device_attach_async_helper, dev);
664 } else {
665 pm_request_idle(dev);
666 }
667
668 if (dev->parent)
669 pm_runtime_put(dev->parent);
670 }
671out_unlock:
672 device_unlock(dev);
673 return ret;
674}
675
676/**
677 * device_attach - try to attach device to a driver.
678 * @dev: device.
679 *
680 * Walk the list of drivers that the bus has and call
681 * driver_probe_device() for each pair. If a compatible
682 * pair is found, break out and return.
683 *
684 * Returns 1 if the device was bound to a driver;
685 * 0 if no matching driver was found;
686 * -ENODEV if the device is not registered.
687 *
688 * When called for a USB interface, @dev->parent lock must be held.
689 */
690int device_attach(struct device *dev)
691{
692 return __device_attach(dev, false);
693}
694EXPORT_SYMBOL_GPL(device_attach);
695
696void device_initial_probe(struct device *dev)
697{
698 __device_attach(dev, true);
699}
700
701static int __driver_attach(struct device *dev, void *data)
702{
703 struct device_driver *drv = data;
704 int ret;
705
706 /*
707 * Lock device and try to bind to it. We drop the error
708 * here and always return 0, because we need to keep trying
709 * to bind to devices and some drivers will return an error
710 * simply if it didn't support the device.
711 *
712 * driver_probe_device() will spit a warning if there
713 * is an error.
714 */
715
716 ret = driver_match_device(drv, dev);
717 if (ret == 0) {
718 /* no match */
719 return 0;
720 } else if (ret == -EPROBE_DEFER) {
721 dev_dbg(dev, "Device match requests probe deferral\n");
722 driver_deferred_probe_add(dev);
723 } else if (ret < 0) {
724 dev_dbg(dev, "Bus failed to match device: %d", ret);
725 return ret;
726 } /* ret > 0 means positive match */
727
728 if (dev->parent) /* Needed for USB */
729 device_lock(dev->parent);
730 device_lock(dev);
731 if (!dev->driver)
732 driver_probe_device(drv, dev);
733 device_unlock(dev);
734 if (dev->parent)
735 device_unlock(dev->parent);
736
737 return 0;
738}
739
740/**
741 * driver_attach - try to bind driver to devices.
742 * @drv: driver.
743 *
744 * Walk the list of devices that the bus has on it and try to
745 * match the driver with each one. If driver_probe_device()
746 * returns 0 and the @dev->driver is set, we've found a
747 * compatible pair.
748 */
749int driver_attach(struct device_driver *drv)
750{
751 return bus_for_each_dev(drv->bus, NULL, drv, __driver_attach);
752}
753EXPORT_SYMBOL_GPL(driver_attach);
754
755/*
756 * __device_release_driver() must be called with @dev lock held.
757 * When called for a USB interface, @dev->parent lock must be held as well.
758 */
759static void __device_release_driver(struct device *dev)
760{
761 struct device_driver *drv;
762
763 drv = dev->driver;
764 if (drv) {
765 if (driver_allows_async_probing(drv))
766 async_synchronize_full();
767
768 pm_runtime_get_sync(dev);
769
770 driver_sysfs_remove(dev);
771
772 if (dev->bus)
773 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
774 BUS_NOTIFY_UNBIND_DRIVER,
775 dev);
776
777 pm_runtime_put_sync(dev);
778
779 if (dev->bus && dev->bus->remove)
780 dev->bus->remove(dev);
781 else if (drv->remove)
782 drv->remove(dev);
783 devres_release_all(dev);
784 dev->driver = NULL;
785 dev_set_drvdata(dev, NULL);
786 if (dev->pm_domain && dev->pm_domain->dismiss)
787 dev->pm_domain->dismiss(dev);
788 pm_runtime_reinit(dev);
789
790 klist_remove(&dev->p->knode_driver);
791 device_pm_check_callbacks(dev);
792 if (dev->bus)
793 blocking_notifier_call_chain(&dev->bus->p->bus_notifier,
794 BUS_NOTIFY_UNBOUND_DRIVER,
795 dev);
796 }
797}
798
799/**
800 * device_release_driver - manually detach device from driver.
801 * @dev: device.
802 *
803 * Manually detach device from driver.
804 * When called for a USB interface, @dev->parent lock must be held.
805 */
806void device_release_driver(struct device *dev)
807{
808 /*
809 * If anyone calls device_release_driver() recursively from
810 * within their ->remove callback for the same device, they
811 * will deadlock right here.
812 */
813 device_lock(dev);
814 __device_release_driver(dev);
815 device_unlock(dev);
816}
817EXPORT_SYMBOL_GPL(device_release_driver);
818
819/**
820 * driver_detach - detach driver from all devices it controls.
821 * @drv: driver.
822 */
823void driver_detach(struct device_driver *drv)
824{
825 struct device_private *dev_prv;
826 struct device *dev;
827
828 for (;;) {
829 spin_lock(&drv->p->klist_devices.k_lock);
830 if (list_empty(&drv->p->klist_devices.k_list)) {
831 spin_unlock(&drv->p->klist_devices.k_lock);
832 break;
833 }
834 dev_prv = list_entry(drv->p->klist_devices.k_list.prev,
835 struct device_private,
836 knode_driver.n_node);
837 dev = dev_prv->device;
838 get_device(dev);
839 spin_unlock(&drv->p->klist_devices.k_lock);
840
841 if (dev->parent) /* Needed for USB */
842 device_lock(dev->parent);
843 device_lock(dev);
844 if (dev->driver == drv)
845 __device_release_driver(dev);
846 device_unlock(dev);
847 if (dev->parent)
848 device_unlock(dev->parent);
849 put_device(dev);
850 }
851}