Linux Audio

Check our new training course

Loading...
v4.17
   1// SPDX-License-Identifier: GPL-2.0
   2/*
 
 
   3 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
   4 * Copyright (C) 2005-2006 Thomas Gleixner
   5 *
   6 * This file contains driver APIs to the irq subsystem.
   7 */
   8
   9#define pr_fmt(fmt) "genirq: " fmt
  10
  11#include <linux/irq.h>
  12#include <linux/kthread.h>
  13#include <linux/module.h>
  14#include <linux/random.h>
  15#include <linux/interrupt.h>
  16#include <linux/slab.h>
  17#include <linux/sched.h>
  18#include <linux/sched/rt.h>
  19#include <linux/sched/task.h>
  20#include <uapi/linux/sched/types.h>
  21#include <linux/task_work.h>
  22
  23#include "internals.h"
  24
  25#ifdef CONFIG_IRQ_FORCED_THREADING
  26__read_mostly bool force_irqthreads;
  27
  28static int __init setup_forced_irqthreads(char *arg)
  29{
  30	force_irqthreads = true;
  31	return 0;
  32}
  33early_param("threadirqs", setup_forced_irqthreads);
  34#endif
  35
  36static void __synchronize_hardirq(struct irq_desc *desc)
  37{
  38	bool inprogress;
  39
  40	do {
  41		unsigned long flags;
  42
  43		/*
  44		 * Wait until we're out of the critical section.  This might
  45		 * give the wrong answer due to the lack of memory barriers.
  46		 */
  47		while (irqd_irq_inprogress(&desc->irq_data))
  48			cpu_relax();
  49
  50		/* Ok, that indicated we're done: double-check carefully. */
  51		raw_spin_lock_irqsave(&desc->lock, flags);
  52		inprogress = irqd_irq_inprogress(&desc->irq_data);
  53		raw_spin_unlock_irqrestore(&desc->lock, flags);
  54
  55		/* Oops, that failed? */
  56	} while (inprogress);
  57}
  58
  59/**
  60 *	synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
  61 *	@irq: interrupt number to wait for
  62 *
  63 *	This function waits for any pending hard IRQ handlers for this
  64 *	interrupt to complete before returning. If you use this
  65 *	function while holding a resource the IRQ handler may need you
  66 *	will deadlock. It does not take associated threaded handlers
  67 *	into account.
  68 *
  69 *	Do not use this for shutdown scenarios where you must be sure
  70 *	that all parts (hardirq and threaded handler) have completed.
  71 *
  72 *	Returns: false if a threaded handler is active.
  73 *
  74 *	This function may be called - with care - from IRQ context.
  75 */
  76bool synchronize_hardirq(unsigned int irq)
  77{
  78	struct irq_desc *desc = irq_to_desc(irq);
  79
  80	if (desc) {
  81		__synchronize_hardirq(desc);
  82		return !atomic_read(&desc->threads_active);
  83	}
  84
  85	return true;
  86}
  87EXPORT_SYMBOL(synchronize_hardirq);
  88
  89/**
  90 *	synchronize_irq - wait for pending IRQ handlers (on other CPUs)
  91 *	@irq: interrupt number to wait for
  92 *
  93 *	This function waits for any pending IRQ handlers for this interrupt
  94 *	to complete before returning. If you use this function while
  95 *	holding a resource the IRQ handler may need you will deadlock.
  96 *
  97 *	This function may be called - with care - from IRQ context.
  98 */
  99void synchronize_irq(unsigned int irq)
 100{
 101	struct irq_desc *desc = irq_to_desc(irq);
 102
 103	if (desc) {
 104		__synchronize_hardirq(desc);
 105		/*
 106		 * We made sure that no hardirq handler is
 107		 * running. Now verify that no threaded handlers are
 108		 * active.
 109		 */
 110		wait_event(desc->wait_for_threads,
 111			   !atomic_read(&desc->threads_active));
 112	}
 113}
 114EXPORT_SYMBOL(synchronize_irq);
 115
 116#ifdef CONFIG_SMP
 117cpumask_var_t irq_default_affinity;
 118
 119static bool __irq_can_set_affinity(struct irq_desc *desc)
 120{
 121	if (!desc || !irqd_can_balance(&desc->irq_data) ||
 122	    !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
 123		return false;
 124	return true;
 125}
 126
 127/**
 128 *	irq_can_set_affinity - Check if the affinity of a given irq can be set
 129 *	@irq:		Interrupt to check
 130 *
 131 */
 132int irq_can_set_affinity(unsigned int irq)
 133{
 134	return __irq_can_set_affinity(irq_to_desc(irq));
 135}
 136
 137/**
 138 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
 139 * @irq:	Interrupt to check
 140 *
 141 * Like irq_can_set_affinity() above, but additionally checks for the
 142 * AFFINITY_MANAGED flag.
 143 */
 144bool irq_can_set_affinity_usr(unsigned int irq)
 145{
 146	struct irq_desc *desc = irq_to_desc(irq);
 147
 148	return __irq_can_set_affinity(desc) &&
 149		!irqd_affinity_is_managed(&desc->irq_data);
 150}
 151
 152/**
 153 *	irq_set_thread_affinity - Notify irq threads to adjust affinity
 154 *	@desc:		irq descriptor which has affitnity changed
 155 *
 156 *	We just set IRQTF_AFFINITY and delegate the affinity setting
 157 *	to the interrupt thread itself. We can not call
 158 *	set_cpus_allowed_ptr() here as we hold desc->lock and this
 159 *	code can be called from hard interrupt context.
 160 */
 161void irq_set_thread_affinity(struct irq_desc *desc)
 162{
 163	struct irqaction *action;
 164
 165	for_each_action_of_desc(desc, action)
 166		if (action->thread)
 167			set_bit(IRQTF_AFFINITY, &action->thread_flags);
 168}
 169
 170static void irq_validate_effective_affinity(struct irq_data *data)
 
 171{
 172#ifdef CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK
 173	const struct cpumask *m = irq_data_get_effective_affinity_mask(data);
 174	struct irq_chip *chip = irq_data_get_irq_chip(data);
 175
 176	if (!cpumask_empty(m))
 177		return;
 178	pr_warn_once("irq_chip %s did not update eff. affinity mask of irq %u\n",
 179		     chip->name, data->irq);
 180#endif
 
 
 
 
 
 
 181}
 
 
 
 
 
 
 
 
 182
 183int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 184			bool force)
 185{
 186	struct irq_desc *desc = irq_data_to_desc(data);
 187	struct irq_chip *chip = irq_data_get_irq_chip(data);
 188	int ret;
 189
 190	if (!chip || !chip->irq_set_affinity)
 191		return -EINVAL;
 192
 193	ret = chip->irq_set_affinity(data, mask, force);
 194	switch (ret) {
 195	case IRQ_SET_MASK_OK:
 196	case IRQ_SET_MASK_OK_DONE:
 197		cpumask_copy(desc->irq_common_data.affinity, mask);
 198	case IRQ_SET_MASK_OK_NOCOPY:
 199		irq_validate_effective_affinity(data);
 200		irq_set_thread_affinity(desc);
 201		ret = 0;
 202	}
 203
 204	return ret;
 205}
 206
 207int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
 208			    bool force)
 209{
 210	struct irq_chip *chip = irq_data_get_irq_chip(data);
 211	struct irq_desc *desc = irq_data_to_desc(data);
 212	int ret = 0;
 213
 214	if (!chip || !chip->irq_set_affinity)
 215		return -EINVAL;
 216
 217	if (irq_can_move_pcntxt(data)) {
 218		ret = irq_do_set_affinity(data, mask, force);
 219	} else {
 220		irqd_set_move_pending(data);
 221		irq_copy_pending(desc, mask);
 222	}
 223
 224	if (desc->affinity_notify) {
 225		kref_get(&desc->affinity_notify->kref);
 226		schedule_work(&desc->affinity_notify->work);
 227	}
 228	irqd_set(data, IRQD_AFFINITY_SET);
 229
 230	return ret;
 231}
 232
 233int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
 234{
 235	struct irq_desc *desc = irq_to_desc(irq);
 236	unsigned long flags;
 237	int ret;
 238
 239	if (!desc)
 240		return -EINVAL;
 241
 242	raw_spin_lock_irqsave(&desc->lock, flags);
 243	ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
 244	raw_spin_unlock_irqrestore(&desc->lock, flags);
 245	return ret;
 246}
 247
 248int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
 249{
 250	unsigned long flags;
 251	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 252
 253	if (!desc)
 254		return -EINVAL;
 255	desc->affinity_hint = m;
 256	irq_put_desc_unlock(desc, flags);
 257	/* set the initial affinity to prevent every interrupt being on CPU0 */
 258	if (m)
 259		__irq_set_affinity(irq, m, false);
 260	return 0;
 261}
 262EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
 263
 264static void irq_affinity_notify(struct work_struct *work)
 265{
 266	struct irq_affinity_notify *notify =
 267		container_of(work, struct irq_affinity_notify, work);
 268	struct irq_desc *desc = irq_to_desc(notify->irq);
 269	cpumask_var_t cpumask;
 270	unsigned long flags;
 271
 272	if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
 273		goto out;
 274
 275	raw_spin_lock_irqsave(&desc->lock, flags);
 276	if (irq_move_pending(&desc->irq_data))
 277		irq_get_pending(cpumask, desc);
 278	else
 279		cpumask_copy(cpumask, desc->irq_common_data.affinity);
 280	raw_spin_unlock_irqrestore(&desc->lock, flags);
 281
 282	notify->notify(notify, cpumask);
 283
 284	free_cpumask_var(cpumask);
 285out:
 286	kref_put(&notify->kref, notify->release);
 287}
 288
 289/**
 290 *	irq_set_affinity_notifier - control notification of IRQ affinity changes
 291 *	@irq:		Interrupt for which to enable/disable notification
 292 *	@notify:	Context for notification, or %NULL to disable
 293 *			notification.  Function pointers must be initialised;
 294 *			the other fields will be initialised by this function.
 295 *
 296 *	Must be called in process context.  Notification may only be enabled
 297 *	after the IRQ is allocated and must be disabled before the IRQ is
 298 *	freed using free_irq().
 299 */
 300int
 301irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
 302{
 303	struct irq_desc *desc = irq_to_desc(irq);
 304	struct irq_affinity_notify *old_notify;
 305	unsigned long flags;
 306
 307	/* The release function is promised process context */
 308	might_sleep();
 309
 310	if (!desc)
 311		return -EINVAL;
 312
 313	/* Complete initialisation of *notify */
 314	if (notify) {
 315		notify->irq = irq;
 316		kref_init(&notify->kref);
 317		INIT_WORK(&notify->work, irq_affinity_notify);
 318	}
 319
 320	raw_spin_lock_irqsave(&desc->lock, flags);
 321	old_notify = desc->affinity_notify;
 322	desc->affinity_notify = notify;
 323	raw_spin_unlock_irqrestore(&desc->lock, flags);
 324
 325	if (old_notify)
 326		kref_put(&old_notify->kref, old_notify->release);
 327
 328	return 0;
 329}
 330EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
 331
 332#ifndef CONFIG_AUTO_IRQ_AFFINITY
 333/*
 334 * Generic version of the affinity autoselector.
 335 */
 336int irq_setup_affinity(struct irq_desc *desc)
 337{
 338	struct cpumask *set = irq_default_affinity;
 339	int ret, node = irq_desc_get_node(desc);
 340	static DEFINE_RAW_SPINLOCK(mask_lock);
 341	static struct cpumask mask;
 342
 343	/* Excludes PER_CPU and NO_BALANCE interrupts */
 344	if (!__irq_can_set_affinity(desc))
 345		return 0;
 346
 347	raw_spin_lock(&mask_lock);
 348	/*
 349	 * Preserve the managed affinity setting and a userspace affinity
 350	 * setup, but make sure that one of the targets is online.
 351	 */
 352	if (irqd_affinity_is_managed(&desc->irq_data) ||
 353	    irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
 354		if (cpumask_intersects(desc->irq_common_data.affinity,
 355				       cpu_online_mask))
 356			set = desc->irq_common_data.affinity;
 357		else
 358			irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
 359	}
 360
 361	cpumask_and(&mask, cpu_online_mask, set);
 362	if (node != NUMA_NO_NODE) {
 363		const struct cpumask *nodemask = cpumask_of_node(node);
 364
 365		/* make sure at least one of the cpus in nodemask is online */
 366		if (cpumask_intersects(&mask, nodemask))
 367			cpumask_and(&mask, &mask, nodemask);
 368	}
 369	ret = irq_do_set_affinity(&desc->irq_data, &mask, false);
 370	raw_spin_unlock(&mask_lock);
 371	return ret;
 372}
 373#else
 374/* Wrapper for ALPHA specific affinity selector magic */
 375int irq_setup_affinity(struct irq_desc *desc)
 376{
 377	return irq_select_affinity(irq_desc_get_irq(desc));
 378}
 379#endif
 380
 381/*
 382 * Called when a bogus affinity is set via /proc/irq
 383 */
 384int irq_select_affinity_usr(unsigned int irq)
 385{
 386	struct irq_desc *desc = irq_to_desc(irq);
 387	unsigned long flags;
 388	int ret;
 389
 390	raw_spin_lock_irqsave(&desc->lock, flags);
 391	ret = irq_setup_affinity(desc);
 392	raw_spin_unlock_irqrestore(&desc->lock, flags);
 393	return ret;
 394}
 
 
 
 
 
 
 
 395#endif
 396
 397/**
 398 *	irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
 399 *	@irq: interrupt number to set affinity
 400 *	@vcpu_info: vCPU specific data or pointer to a percpu array of vCPU
 401 *	            specific data for percpu_devid interrupts
 402 *
 403 *	This function uses the vCPU specific data to set the vCPU
 404 *	affinity for an irq. The vCPU specific data is passed from
 405 *	outside, such as KVM. One example code path is as below:
 406 *	KVM -> IOMMU -> irq_set_vcpu_affinity().
 407 */
 408int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
 409{
 410	unsigned long flags;
 411	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 412	struct irq_data *data;
 413	struct irq_chip *chip;
 414	int ret = -ENOSYS;
 415
 416	if (!desc)
 417		return -EINVAL;
 418
 419	data = irq_desc_get_irq_data(desc);
 420	do {
 421		chip = irq_data_get_irq_chip(data);
 422		if (chip && chip->irq_set_vcpu_affinity)
 423			break;
 424#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
 425		data = data->parent_data;
 426#else
 427		data = NULL;
 428#endif
 429	} while (data);
 430
 431	if (data)
 432		ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
 433	irq_put_desc_unlock(desc, flags);
 434
 435	return ret;
 436}
 437EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
 438
 439void __disable_irq(struct irq_desc *desc)
 440{
 441	if (!desc->depth++)
 442		irq_disable(desc);
 443}
 444
 445static int __disable_irq_nosync(unsigned int irq)
 446{
 447	unsigned long flags;
 448	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 449
 450	if (!desc)
 451		return -EINVAL;
 452	__disable_irq(desc);
 453	irq_put_desc_busunlock(desc, flags);
 454	return 0;
 455}
 456
 457/**
 458 *	disable_irq_nosync - disable an irq without waiting
 459 *	@irq: Interrupt to disable
 460 *
 461 *	Disable the selected interrupt line.  Disables and Enables are
 462 *	nested.
 463 *	Unlike disable_irq(), this function does not ensure existing
 464 *	instances of the IRQ handler have completed before returning.
 465 *
 466 *	This function may be called from IRQ context.
 467 */
 468void disable_irq_nosync(unsigned int irq)
 469{
 470	__disable_irq_nosync(irq);
 471}
 472EXPORT_SYMBOL(disable_irq_nosync);
 473
 474/**
 475 *	disable_irq - disable an irq and wait for completion
 476 *	@irq: Interrupt to disable
 477 *
 478 *	Disable the selected interrupt line.  Enables and Disables are
 479 *	nested.
 480 *	This function waits for any pending IRQ handlers for this interrupt
 481 *	to complete before returning. If you use this function while
 482 *	holding a resource the IRQ handler may need you will deadlock.
 483 *
 484 *	This function may be called - with care - from IRQ context.
 485 */
 486void disable_irq(unsigned int irq)
 487{
 488	if (!__disable_irq_nosync(irq))
 489		synchronize_irq(irq);
 490}
 491EXPORT_SYMBOL(disable_irq);
 492
 493/**
 494 *	disable_hardirq - disables an irq and waits for hardirq completion
 495 *	@irq: Interrupt to disable
 496 *
 497 *	Disable the selected interrupt line.  Enables and Disables are
 498 *	nested.
 499 *	This function waits for any pending hard IRQ handlers for this
 500 *	interrupt to complete before returning. If you use this function while
 501 *	holding a resource the hard IRQ handler may need you will deadlock.
 502 *
 503 *	When used to optimistically disable an interrupt from atomic context
 504 *	the return value must be checked.
 505 *
 506 *	Returns: false if a threaded handler is active.
 507 *
 508 *	This function may be called - with care - from IRQ context.
 509 */
 510bool disable_hardirq(unsigned int irq)
 511{
 512	if (!__disable_irq_nosync(irq))
 513		return synchronize_hardirq(irq);
 514
 515	return false;
 516}
 517EXPORT_SYMBOL_GPL(disable_hardirq);
 518
 519void __enable_irq(struct irq_desc *desc)
 520{
 521	switch (desc->depth) {
 522	case 0:
 523 err_out:
 524		WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
 525		     irq_desc_get_irq(desc));
 526		break;
 527	case 1: {
 528		if (desc->istate & IRQS_SUSPENDED)
 529			goto err_out;
 530		/* Prevent probing on this irq: */
 531		irq_settings_set_noprobe(desc);
 532		/*
 533		 * Call irq_startup() not irq_enable() here because the
 534		 * interrupt might be marked NOAUTOEN. So irq_startup()
 535		 * needs to be invoked when it gets enabled the first
 536		 * time. If it was already started up, then irq_startup()
 537		 * will invoke irq_enable() under the hood.
 538		 */
 539		irq_startup(desc, IRQ_RESEND, IRQ_START_FORCE);
 540		break;
 541	}
 542	default:
 543		desc->depth--;
 544	}
 545}
 546
 547/**
 548 *	enable_irq - enable handling of an irq
 549 *	@irq: Interrupt to enable
 550 *
 551 *	Undoes the effect of one call to disable_irq().  If this
 552 *	matches the last disable, processing of interrupts on this
 553 *	IRQ line is re-enabled.
 554 *
 555 *	This function may be called from IRQ context only when
 556 *	desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
 557 */
 558void enable_irq(unsigned int irq)
 559{
 560	unsigned long flags;
 561	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 562
 563	if (!desc)
 564		return;
 565	if (WARN(!desc->irq_data.chip,
 566		 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
 567		goto out;
 568
 569	__enable_irq(desc);
 570out:
 571	irq_put_desc_busunlock(desc, flags);
 572}
 573EXPORT_SYMBOL(enable_irq);
 574
 575static int set_irq_wake_real(unsigned int irq, unsigned int on)
 576{
 577	struct irq_desc *desc = irq_to_desc(irq);
 578	int ret = -ENXIO;
 579
 580	if (irq_desc_get_chip(desc)->flags &  IRQCHIP_SKIP_SET_WAKE)
 581		return 0;
 582
 583	if (desc->irq_data.chip->irq_set_wake)
 584		ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
 585
 586	return ret;
 587}
 588
 589/**
 590 *	irq_set_irq_wake - control irq power management wakeup
 591 *	@irq:	interrupt to control
 592 *	@on:	enable/disable power management wakeup
 593 *
 594 *	Enable/disable power management wakeup mode, which is
 595 *	disabled by default.  Enables and disables must match,
 596 *	just as they match for non-wakeup mode support.
 597 *
 598 *	Wakeup mode lets this IRQ wake the system from sleep
 599 *	states like "suspend to RAM".
 600 */
 601int irq_set_irq_wake(unsigned int irq, unsigned int on)
 602{
 603	unsigned long flags;
 604	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 605	int ret = 0;
 606
 607	if (!desc)
 608		return -EINVAL;
 609
 610	/* wakeup-capable irqs can be shared between drivers that
 611	 * don't need to have the same sleep mode behaviors.
 612	 */
 613	if (on) {
 614		if (desc->wake_depth++ == 0) {
 615			ret = set_irq_wake_real(irq, on);
 616			if (ret)
 617				desc->wake_depth = 0;
 618			else
 619				irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
 620		}
 621	} else {
 622		if (desc->wake_depth == 0) {
 623			WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
 624		} else if (--desc->wake_depth == 0) {
 625			ret = set_irq_wake_real(irq, on);
 626			if (ret)
 627				desc->wake_depth = 1;
 628			else
 629				irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
 630		}
 631	}
 632	irq_put_desc_busunlock(desc, flags);
 633	return ret;
 634}
 635EXPORT_SYMBOL(irq_set_irq_wake);
 636
 637/*
 638 * Internal function that tells the architecture code whether a
 639 * particular irq has been exclusively allocated or is available
 640 * for driver use.
 641 */
 642int can_request_irq(unsigned int irq, unsigned long irqflags)
 643{
 644	unsigned long flags;
 645	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 646	int canrequest = 0;
 647
 648	if (!desc)
 649		return 0;
 650
 651	if (irq_settings_can_request(desc)) {
 652		if (!desc->action ||
 653		    irqflags & desc->action->flags & IRQF_SHARED)
 654			canrequest = 1;
 655	}
 656	irq_put_desc_unlock(desc, flags);
 657	return canrequest;
 658}
 659
 660int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
 661{
 662	struct irq_chip *chip = desc->irq_data.chip;
 663	int ret, unmask = 0;
 664
 665	if (!chip || !chip->irq_set_type) {
 666		/*
 667		 * IRQF_TRIGGER_* but the PIC does not support multiple
 668		 * flow-types?
 669		 */
 670		pr_debug("No set_type function for IRQ %d (%s)\n",
 671			 irq_desc_get_irq(desc),
 672			 chip ? (chip->name ? : "unknown") : "unknown");
 673		return 0;
 674	}
 675
 676	if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
 677		if (!irqd_irq_masked(&desc->irq_data))
 678			mask_irq(desc);
 679		if (!irqd_irq_disabled(&desc->irq_data))
 680			unmask = 1;
 681	}
 682
 683	/* Mask all flags except trigger mode */
 684	flags &= IRQ_TYPE_SENSE_MASK;
 685	ret = chip->irq_set_type(&desc->irq_data, flags);
 686
 687	switch (ret) {
 688	case IRQ_SET_MASK_OK:
 689	case IRQ_SET_MASK_OK_DONE:
 690		irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
 691		irqd_set(&desc->irq_data, flags);
 692
 693	case IRQ_SET_MASK_OK_NOCOPY:
 694		flags = irqd_get_trigger_type(&desc->irq_data);
 695		irq_settings_set_trigger_mask(desc, flags);
 696		irqd_clear(&desc->irq_data, IRQD_LEVEL);
 697		irq_settings_clr_level(desc);
 698		if (flags & IRQ_TYPE_LEVEL_MASK) {
 699			irq_settings_set_level(desc);
 700			irqd_set(&desc->irq_data, IRQD_LEVEL);
 701		}
 702
 703		ret = 0;
 704		break;
 705	default:
 706		pr_err("Setting trigger mode %lu for irq %u failed (%pF)\n",
 707		       flags, irq_desc_get_irq(desc), chip->irq_set_type);
 708	}
 709	if (unmask)
 710		unmask_irq(desc);
 711	return ret;
 712}
 713
 714#ifdef CONFIG_HARDIRQS_SW_RESEND
 715int irq_set_parent(int irq, int parent_irq)
 716{
 717	unsigned long flags;
 718	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 719
 720	if (!desc)
 721		return -EINVAL;
 722
 723	desc->parent_irq = parent_irq;
 724
 725	irq_put_desc_unlock(desc, flags);
 726	return 0;
 727}
 728EXPORT_SYMBOL_GPL(irq_set_parent);
 729#endif
 730
 731/*
 732 * Default primary interrupt handler for threaded interrupts. Is
 733 * assigned as primary handler when request_threaded_irq is called
 734 * with handler == NULL. Useful for oneshot interrupts.
 735 */
 736static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
 737{
 738	return IRQ_WAKE_THREAD;
 739}
 740
 741/*
 742 * Primary handler for nested threaded interrupts. Should never be
 743 * called.
 744 */
 745static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
 746{
 747	WARN(1, "Primary handler called for nested irq %d\n", irq);
 748	return IRQ_NONE;
 749}
 750
 751static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
 752{
 753	WARN(1, "Secondary action handler called for irq %d\n", irq);
 754	return IRQ_NONE;
 755}
 756
 757static int irq_wait_for_interrupt(struct irqaction *action)
 758{
 759	set_current_state(TASK_INTERRUPTIBLE);
 760
 761	while (!kthread_should_stop()) {
 762
 763		if (test_and_clear_bit(IRQTF_RUNTHREAD,
 764				       &action->thread_flags)) {
 765			__set_current_state(TASK_RUNNING);
 766			return 0;
 767		}
 768		schedule();
 769		set_current_state(TASK_INTERRUPTIBLE);
 770	}
 771	__set_current_state(TASK_RUNNING);
 772	return -1;
 773}
 774
 775/*
 776 * Oneshot interrupts keep the irq line masked until the threaded
 777 * handler finished. unmask if the interrupt has not been disabled and
 778 * is marked MASKED.
 779 */
 780static void irq_finalize_oneshot(struct irq_desc *desc,
 781				 struct irqaction *action)
 782{
 783	if (!(desc->istate & IRQS_ONESHOT) ||
 784	    action->handler == irq_forced_secondary_handler)
 785		return;
 786again:
 787	chip_bus_lock(desc);
 788	raw_spin_lock_irq(&desc->lock);
 789
 790	/*
 791	 * Implausible though it may be we need to protect us against
 792	 * the following scenario:
 793	 *
 794	 * The thread is faster done than the hard interrupt handler
 795	 * on the other CPU. If we unmask the irq line then the
 796	 * interrupt can come in again and masks the line, leaves due
 797	 * to IRQS_INPROGRESS and the irq line is masked forever.
 798	 *
 799	 * This also serializes the state of shared oneshot handlers
 800	 * versus "desc->threads_onehsot |= action->thread_mask;" in
 801	 * irq_wake_thread(). See the comment there which explains the
 802	 * serialization.
 803	 */
 804	if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
 805		raw_spin_unlock_irq(&desc->lock);
 806		chip_bus_sync_unlock(desc);
 807		cpu_relax();
 808		goto again;
 809	}
 810
 811	/*
 812	 * Now check again, whether the thread should run. Otherwise
 813	 * we would clear the threads_oneshot bit of this thread which
 814	 * was just set.
 815	 */
 816	if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
 817		goto out_unlock;
 818
 819	desc->threads_oneshot &= ~action->thread_mask;
 820
 821	if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
 822	    irqd_irq_masked(&desc->irq_data))
 823		unmask_threaded_irq(desc);
 824
 825out_unlock:
 826	raw_spin_unlock_irq(&desc->lock);
 827	chip_bus_sync_unlock(desc);
 828}
 829
 830#ifdef CONFIG_SMP
 831/*
 832 * Check whether we need to change the affinity of the interrupt thread.
 833 */
 834static void
 835irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
 836{
 837	cpumask_var_t mask;
 838	bool valid = true;
 839
 840	if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
 841		return;
 842
 843	/*
 844	 * In case we are out of memory we set IRQTF_AFFINITY again and
 845	 * try again next time
 846	 */
 847	if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
 848		set_bit(IRQTF_AFFINITY, &action->thread_flags);
 849		return;
 850	}
 851
 852	raw_spin_lock_irq(&desc->lock);
 853	/*
 854	 * This code is triggered unconditionally. Check the affinity
 855	 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
 856	 */
 857	if (cpumask_available(desc->irq_common_data.affinity)) {
 858		const struct cpumask *m;
 859
 860		m = irq_data_get_effective_affinity_mask(&desc->irq_data);
 861		cpumask_copy(mask, m);
 862	} else {
 863		valid = false;
 864	}
 865	raw_spin_unlock_irq(&desc->lock);
 866
 867	if (valid)
 868		set_cpus_allowed_ptr(current, mask);
 869	free_cpumask_var(mask);
 870}
 871#else
 872static inline void
 873irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
 874#endif
 875
 876/*
 877 * Interrupts which are not explicitely requested as threaded
 878 * interrupts rely on the implicit bh/preempt disable of the hard irq
 879 * context. So we need to disable bh here to avoid deadlocks and other
 880 * side effects.
 881 */
 882static irqreturn_t
 883irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
 884{
 885	irqreturn_t ret;
 886
 887	local_bh_disable();
 888	ret = action->thread_fn(action->irq, action->dev_id);
 889	irq_finalize_oneshot(desc, action);
 890	local_bh_enable();
 891	return ret;
 892}
 893
 894/*
 895 * Interrupts explicitly requested as threaded interrupts want to be
 896 * preemtible - many of them need to sleep and wait for slow busses to
 897 * complete.
 898 */
 899static irqreturn_t irq_thread_fn(struct irq_desc *desc,
 900		struct irqaction *action)
 901{
 902	irqreturn_t ret;
 903
 904	ret = action->thread_fn(action->irq, action->dev_id);
 905	irq_finalize_oneshot(desc, action);
 906	return ret;
 907}
 908
 909static void wake_threads_waitq(struct irq_desc *desc)
 910{
 911	if (atomic_dec_and_test(&desc->threads_active))
 912		wake_up(&desc->wait_for_threads);
 913}
 914
 915static void irq_thread_dtor(struct callback_head *unused)
 916{
 917	struct task_struct *tsk = current;
 918	struct irq_desc *desc;
 919	struct irqaction *action;
 920
 921	if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
 922		return;
 923
 924	action = kthread_data(tsk);
 925
 926	pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
 927	       tsk->comm, tsk->pid, action->irq);
 928
 929
 930	desc = irq_to_desc(action->irq);
 931	/*
 932	 * If IRQTF_RUNTHREAD is set, we need to decrement
 933	 * desc->threads_active and wake possible waiters.
 934	 */
 935	if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
 936		wake_threads_waitq(desc);
 937
 938	/* Prevent a stale desc->threads_oneshot */
 939	irq_finalize_oneshot(desc, action);
 940}
 941
 942static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
 943{
 944	struct irqaction *secondary = action->secondary;
 945
 946	if (WARN_ON_ONCE(!secondary))
 947		return;
 948
 949	raw_spin_lock_irq(&desc->lock);
 950	__irq_wake_thread(desc, secondary);
 951	raw_spin_unlock_irq(&desc->lock);
 952}
 953
 954/*
 955 * Interrupt handler thread
 956 */
 957static int irq_thread(void *data)
 958{
 959	struct callback_head on_exit_work;
 960	struct irqaction *action = data;
 961	struct irq_desc *desc = irq_to_desc(action->irq);
 962	irqreturn_t (*handler_fn)(struct irq_desc *desc,
 963			struct irqaction *action);
 964
 965	if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
 966					&action->thread_flags))
 967		handler_fn = irq_forced_thread_fn;
 968	else
 969		handler_fn = irq_thread_fn;
 970
 971	init_task_work(&on_exit_work, irq_thread_dtor);
 972	task_work_add(current, &on_exit_work, false);
 973
 974	irq_thread_check_affinity(desc, action);
 975
 976	while (!irq_wait_for_interrupt(action)) {
 977		irqreturn_t action_ret;
 978
 979		irq_thread_check_affinity(desc, action);
 980
 981		action_ret = handler_fn(desc, action);
 982		if (action_ret == IRQ_HANDLED)
 983			atomic_inc(&desc->threads_handled);
 984		if (action_ret == IRQ_WAKE_THREAD)
 985			irq_wake_secondary(desc, action);
 986
 987		wake_threads_waitq(desc);
 988	}
 989
 990	/*
 991	 * This is the regular exit path. __free_irq() is stopping the
 992	 * thread via kthread_stop() after calling
 993	 * synchronize_irq(). So neither IRQTF_RUNTHREAD nor the
 994	 * oneshot mask bit can be set. We cannot verify that as we
 995	 * cannot touch the oneshot mask at this point anymore as
 996	 * __setup_irq() might have given out currents thread_mask
 997	 * again.
 998	 */
 999	task_work_cancel(current, irq_thread_dtor);
1000	return 0;
1001}
1002
1003/**
1004 *	irq_wake_thread - wake the irq thread for the action identified by dev_id
1005 *	@irq:		Interrupt line
1006 *	@dev_id:	Device identity for which the thread should be woken
1007 *
1008 */
1009void irq_wake_thread(unsigned int irq, void *dev_id)
1010{
1011	struct irq_desc *desc = irq_to_desc(irq);
1012	struct irqaction *action;
1013	unsigned long flags;
1014
1015	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1016		return;
1017
1018	raw_spin_lock_irqsave(&desc->lock, flags);
1019	for_each_action_of_desc(desc, action) {
1020		if (action->dev_id == dev_id) {
1021			if (action->thread)
1022				__irq_wake_thread(desc, action);
1023			break;
1024		}
1025	}
1026	raw_spin_unlock_irqrestore(&desc->lock, flags);
1027}
1028EXPORT_SYMBOL_GPL(irq_wake_thread);
1029
1030static int irq_setup_forced_threading(struct irqaction *new)
1031{
1032	if (!force_irqthreads)
1033		return 0;
1034	if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1035		return 0;
1036
1037	new->flags |= IRQF_ONESHOT;
1038
1039	/*
1040	 * Handle the case where we have a real primary handler and a
1041	 * thread handler. We force thread them as well by creating a
1042	 * secondary action.
1043	 */
1044	if (new->handler != irq_default_primary_handler && new->thread_fn) {
1045		/* Allocate the secondary action */
1046		new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1047		if (!new->secondary)
1048			return -ENOMEM;
1049		new->secondary->handler = irq_forced_secondary_handler;
1050		new->secondary->thread_fn = new->thread_fn;
1051		new->secondary->dev_id = new->dev_id;
1052		new->secondary->irq = new->irq;
1053		new->secondary->name = new->name;
1054	}
1055	/* Deal with the primary handler */
1056	set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1057	new->thread_fn = new->handler;
1058	new->handler = irq_default_primary_handler;
1059	return 0;
1060}
1061
1062static int irq_request_resources(struct irq_desc *desc)
1063{
1064	struct irq_data *d = &desc->irq_data;
1065	struct irq_chip *c = d->chip;
1066
1067	return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1068}
1069
1070static void irq_release_resources(struct irq_desc *desc)
1071{
1072	struct irq_data *d = &desc->irq_data;
1073	struct irq_chip *c = d->chip;
1074
1075	if (c->irq_release_resources)
1076		c->irq_release_resources(d);
1077}
1078
1079static int
1080setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1081{
1082	struct task_struct *t;
1083	struct sched_param param = {
1084		.sched_priority = MAX_USER_RT_PRIO/2,
1085	};
1086
1087	if (!secondary) {
1088		t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1089				   new->name);
1090	} else {
1091		t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1092				   new->name);
1093		param.sched_priority -= 1;
1094	}
1095
1096	if (IS_ERR(t))
1097		return PTR_ERR(t);
1098
1099	sched_setscheduler_nocheck(t, SCHED_FIFO, &param);
1100
1101	/*
1102	 * We keep the reference to the task struct even if
1103	 * the thread dies to avoid that the interrupt code
1104	 * references an already freed task_struct.
1105	 */
1106	get_task_struct(t);
1107	new->thread = t;
1108	/*
1109	 * Tell the thread to set its affinity. This is
1110	 * important for shared interrupt handlers as we do
1111	 * not invoke setup_affinity() for the secondary
1112	 * handlers as everything is already set up. Even for
1113	 * interrupts marked with IRQF_NO_BALANCE this is
1114	 * correct as we want the thread to move to the cpu(s)
1115	 * on which the requesting code placed the interrupt.
1116	 */
1117	set_bit(IRQTF_AFFINITY, &new->thread_flags);
1118	return 0;
1119}
1120
1121/*
1122 * Internal function to register an irqaction - typically used to
1123 * allocate special interrupts that are part of the architecture.
1124 *
1125 * Locking rules:
1126 *
1127 * desc->request_mutex	Provides serialization against a concurrent free_irq()
1128 *   chip_bus_lock	Provides serialization for slow bus operations
1129 *     desc->lock	Provides serialization against hard interrupts
1130 *
1131 * chip_bus_lock and desc->lock are sufficient for all other management and
1132 * interrupt related functions. desc->request_mutex solely serializes
1133 * request/free_irq().
1134 */
1135static int
1136__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1137{
1138	struct irqaction *old, **old_ptr;
1139	unsigned long flags, thread_mask = 0;
1140	int ret, nested, shared = 0;
 
1141
1142	if (!desc)
1143		return -EINVAL;
1144
1145	if (desc->irq_data.chip == &no_irq_chip)
1146		return -ENOSYS;
1147	if (!try_module_get(desc->owner))
1148		return -ENODEV;
1149
1150	new->irq = irq;
1151
1152	/*
1153	 * If the trigger type is not specified by the caller,
1154	 * then use the default for this interrupt.
1155	 */
1156	if (!(new->flags & IRQF_TRIGGER_MASK))
1157		new->flags |= irqd_get_trigger_type(&desc->irq_data);
1158
1159	/*
1160	 * Check whether the interrupt nests into another interrupt
1161	 * thread.
1162	 */
1163	nested = irq_settings_is_nested_thread(desc);
1164	if (nested) {
1165		if (!new->thread_fn) {
1166			ret = -EINVAL;
1167			goto out_mput;
1168		}
1169		/*
1170		 * Replace the primary handler which was provided from
1171		 * the driver for non nested interrupt handling by the
1172		 * dummy function which warns when called.
1173		 */
1174		new->handler = irq_nested_primary_handler;
1175	} else {
1176		if (irq_settings_can_thread(desc)) {
1177			ret = irq_setup_forced_threading(new);
1178			if (ret)
1179				goto out_mput;
1180		}
1181	}
1182
1183	/*
1184	 * Create a handler thread when a thread function is supplied
1185	 * and the interrupt does not nest into another interrupt
1186	 * thread.
1187	 */
1188	if (new->thread_fn && !nested) {
1189		ret = setup_irq_thread(new, irq, false);
1190		if (ret)
1191			goto out_mput;
1192		if (new->secondary) {
1193			ret = setup_irq_thread(new->secondary, irq, true);
1194			if (ret)
1195				goto out_thread;
1196		}
1197	}
1198
 
 
 
 
 
1199	/*
1200	 * Drivers are often written to work w/o knowledge about the
1201	 * underlying irq chip implementation, so a request for a
1202	 * threaded irq without a primary hard irq context handler
1203	 * requires the ONESHOT flag to be set. Some irq chips like
1204	 * MSI based interrupts are per se one shot safe. Check the
1205	 * chip flags, so we can avoid the unmask dance at the end of
1206	 * the threaded handler for those.
1207	 */
1208	if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1209		new->flags &= ~IRQF_ONESHOT;
1210
1211	/*
1212	 * Protects against a concurrent __free_irq() call which might wait
1213	 * for synchronize_irq() to complete without holding the optional
1214	 * chip bus lock and desc->lock.
1215	 */
1216	mutex_lock(&desc->request_mutex);
1217
1218	/*
1219	 * Acquire bus lock as the irq_request_resources() callback below
1220	 * might rely on the serialization or the magic power management
1221	 * functions which are abusing the irq_bus_lock() callback,
1222	 */
1223	chip_bus_lock(desc);
1224
1225	/* First installed action requests resources. */
1226	if (!desc->action) {
1227		ret = irq_request_resources(desc);
1228		if (ret) {
1229			pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1230			       new->name, irq, desc->irq_data.chip->name);
1231			goto out_bus_unlock;
1232		}
1233	}
1234
1235	/*
1236	 * The following block of code has to be executed atomically
1237	 * protected against a concurrent interrupt and any of the other
1238	 * management calls which are not serialized via
1239	 * desc->request_mutex or the optional bus lock.
1240	 */
1241	raw_spin_lock_irqsave(&desc->lock, flags);
1242	old_ptr = &desc->action;
1243	old = *old_ptr;
1244	if (old) {
1245		/*
1246		 * Can't share interrupts unless both agree to and are
1247		 * the same type (level, edge, polarity). So both flag
1248		 * fields must have IRQF_SHARED set and the bits which
1249		 * set the trigger type must match. Also all must
1250		 * agree on ONESHOT.
1251		 */
1252		unsigned int oldtype;
1253
1254		/*
1255		 * If nobody did set the configuration before, inherit
1256		 * the one provided by the requester.
1257		 */
1258		if (irqd_trigger_type_was_set(&desc->irq_data)) {
1259			oldtype = irqd_get_trigger_type(&desc->irq_data);
1260		} else {
1261			oldtype = new->flags & IRQF_TRIGGER_MASK;
1262			irqd_set_trigger_type(&desc->irq_data, oldtype);
1263		}
1264
1265		if (!((old->flags & new->flags) & IRQF_SHARED) ||
1266		    (oldtype != (new->flags & IRQF_TRIGGER_MASK)) ||
1267		    ((old->flags ^ new->flags) & IRQF_ONESHOT))
1268			goto mismatch;
1269
1270		/* All handlers must agree on per-cpuness */
1271		if ((old->flags & IRQF_PERCPU) !=
1272		    (new->flags & IRQF_PERCPU))
1273			goto mismatch;
1274
1275		/* add new interrupt at end of irq queue */
1276		do {
1277			/*
1278			 * Or all existing action->thread_mask bits,
1279			 * so we can find the next zero bit for this
1280			 * new action.
1281			 */
1282			thread_mask |= old->thread_mask;
1283			old_ptr = &old->next;
1284			old = *old_ptr;
1285		} while (old);
1286		shared = 1;
1287	}
1288
1289	/*
1290	 * Setup the thread mask for this irqaction for ONESHOT. For
1291	 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1292	 * conditional in irq_wake_thread().
1293	 */
1294	if (new->flags & IRQF_ONESHOT) {
1295		/*
1296		 * Unlikely to have 32 resp 64 irqs sharing one line,
1297		 * but who knows.
1298		 */
1299		if (thread_mask == ~0UL) {
1300			ret = -EBUSY;
1301			goto out_unlock;
1302		}
1303		/*
1304		 * The thread_mask for the action is or'ed to
1305		 * desc->thread_active to indicate that the
1306		 * IRQF_ONESHOT thread handler has been woken, but not
1307		 * yet finished. The bit is cleared when a thread
1308		 * completes. When all threads of a shared interrupt
1309		 * line have completed desc->threads_active becomes
1310		 * zero and the interrupt line is unmasked. See
1311		 * handle.c:irq_wake_thread() for further information.
1312		 *
1313		 * If no thread is woken by primary (hard irq context)
1314		 * interrupt handlers, then desc->threads_active is
1315		 * also checked for zero to unmask the irq line in the
1316		 * affected hard irq flow handlers
1317		 * (handle_[fasteoi|level]_irq).
1318		 *
1319		 * The new action gets the first zero bit of
1320		 * thread_mask assigned. See the loop above which or's
1321		 * all existing action->thread_mask bits.
1322		 */
1323		new->thread_mask = 1UL << ffz(thread_mask);
1324
1325	} else if (new->handler == irq_default_primary_handler &&
1326		   !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1327		/*
1328		 * The interrupt was requested with handler = NULL, so
1329		 * we use the default primary handler for it. But it
1330		 * does not have the oneshot flag set. In combination
1331		 * with level interrupts this is deadly, because the
1332		 * default primary handler just wakes the thread, then
1333		 * the irq lines is reenabled, but the device still
1334		 * has the level irq asserted. Rinse and repeat....
1335		 *
1336		 * While this works for edge type interrupts, we play
1337		 * it safe and reject unconditionally because we can't
1338		 * say for sure which type this interrupt really
1339		 * has. The type flags are unreliable as the
1340		 * underlying chip implementation can override them.
1341		 */
1342		pr_err("Threaded irq requested with handler=NULL and !ONESHOT for irq %d\n",
1343		       irq);
1344		ret = -EINVAL;
1345		goto out_unlock;
1346	}
1347
1348	if (!shared) {
 
 
 
 
 
 
 
1349		init_waitqueue_head(&desc->wait_for_threads);
1350
1351		/* Setup the type (level, edge polarity) if configured: */
1352		if (new->flags & IRQF_TRIGGER_MASK) {
1353			ret = __irq_set_trigger(desc,
1354						new->flags & IRQF_TRIGGER_MASK);
1355
1356			if (ret)
1357				goto out_unlock;
1358		}
1359
1360		/*
1361		 * Activate the interrupt. That activation must happen
1362		 * independently of IRQ_NOAUTOEN. request_irq() can fail
1363		 * and the callers are supposed to handle
1364		 * that. enable_irq() of an interrupt requested with
1365		 * IRQ_NOAUTOEN is not supposed to fail. The activation
1366		 * keeps it in shutdown mode, it merily associates
1367		 * resources if necessary and if that's not possible it
1368		 * fails. Interrupts which are in managed shutdown mode
1369		 * will simply ignore that activation request.
1370		 */
1371		ret = irq_activate(desc);
1372		if (ret)
1373			goto out_unlock;
1374
1375		desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1376				  IRQS_ONESHOT | IRQS_WAITING);
1377		irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1378
1379		if (new->flags & IRQF_PERCPU) {
1380			irqd_set(&desc->irq_data, IRQD_PER_CPU);
1381			irq_settings_set_per_cpu(desc);
1382		}
1383
1384		if (new->flags & IRQF_ONESHOT)
1385			desc->istate |= IRQS_ONESHOT;
1386
 
 
 
 
 
 
1387		/* Exclude IRQ from balancing if requested */
1388		if (new->flags & IRQF_NOBALANCING) {
1389			irq_settings_set_no_balancing(desc);
1390			irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1391		}
1392
1393		if (irq_settings_can_autoenable(desc)) {
1394			irq_startup(desc, IRQ_RESEND, IRQ_START_COND);
1395		} else {
1396			/*
1397			 * Shared interrupts do not go well with disabling
1398			 * auto enable. The sharing interrupt might request
1399			 * it while it's still disabled and then wait for
1400			 * interrupts forever.
1401			 */
1402			WARN_ON_ONCE(new->flags & IRQF_SHARED);
1403			/* Undo nested disables: */
1404			desc->depth = 1;
1405		}
1406
1407	} else if (new->flags & IRQF_TRIGGER_MASK) {
1408		unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1409		unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1410
1411		if (nmsk != omsk)
1412			/* hope the handler works with current  trigger mode */
1413			pr_warn("irq %d uses trigger mode %u; requested %u\n",
1414				irq, omsk, nmsk);
1415	}
1416
1417	*old_ptr = new;
1418
1419	irq_pm_install_action(desc, new);
1420
1421	/* Reset broken irq detection when installing new handler */
1422	desc->irq_count = 0;
1423	desc->irqs_unhandled = 0;
1424
1425	/*
1426	 * Check whether we disabled the irq via the spurious handler
1427	 * before. Reenable it and give it another chance.
1428	 */
1429	if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1430		desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1431		__enable_irq(desc);
1432	}
1433
1434	raw_spin_unlock_irqrestore(&desc->lock, flags);
1435	chip_bus_sync_unlock(desc);
1436	mutex_unlock(&desc->request_mutex);
1437
1438	irq_setup_timings(desc, new);
1439
1440	/*
1441	 * Strictly no need to wake it up, but hung_task complains
1442	 * when no hard interrupt wakes the thread up.
1443	 */
1444	if (new->thread)
1445		wake_up_process(new->thread);
1446	if (new->secondary)
1447		wake_up_process(new->secondary->thread);
1448
1449	register_irq_proc(irq, desc);
1450	new->dir = NULL;
1451	register_handler_proc(irq, new);
 
 
1452	return 0;
1453
1454mismatch:
1455	if (!(new->flags & IRQF_PROBE_SHARED)) {
1456		pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1457		       irq, new->flags, new->name, old->flags, old->name);
1458#ifdef CONFIG_DEBUG_SHIRQ
1459		dump_stack();
1460#endif
1461	}
1462	ret = -EBUSY;
1463
1464out_unlock:
1465	raw_spin_unlock_irqrestore(&desc->lock, flags);
1466
1467	if (!desc->action)
1468		irq_release_resources(desc);
1469out_bus_unlock:
1470	chip_bus_sync_unlock(desc);
1471	mutex_unlock(&desc->request_mutex);
1472
1473out_thread:
1474	if (new->thread) {
1475		struct task_struct *t = new->thread;
1476
1477		new->thread = NULL;
1478		kthread_stop(t);
1479		put_task_struct(t);
1480	}
1481	if (new->secondary && new->secondary->thread) {
1482		struct task_struct *t = new->secondary->thread;
1483
1484		new->secondary->thread = NULL;
1485		kthread_stop(t);
1486		put_task_struct(t);
1487	}
1488out_mput:
1489	module_put(desc->owner);
1490	return ret;
1491}
1492
1493/**
1494 *	setup_irq - setup an interrupt
1495 *	@irq: Interrupt line to setup
1496 *	@act: irqaction for the interrupt
1497 *
1498 * Used to statically setup interrupts in the early boot process.
1499 */
1500int setup_irq(unsigned int irq, struct irqaction *act)
1501{
1502	int retval;
1503	struct irq_desc *desc = irq_to_desc(irq);
1504
1505	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1506		return -EINVAL;
1507
1508	retval = irq_chip_pm_get(&desc->irq_data);
1509	if (retval < 0)
1510		return retval;
1511
 
1512	retval = __setup_irq(irq, desc, act);
 
1513
1514	if (retval)
1515		irq_chip_pm_put(&desc->irq_data);
1516
1517	return retval;
1518}
1519EXPORT_SYMBOL_GPL(setup_irq);
1520
1521/*
1522 * Internal function to unregister an irqaction - used to free
1523 * regular and special interrupts that are part of the architecture.
1524 */
1525static struct irqaction *__free_irq(struct irq_desc *desc, void *dev_id)
1526{
1527	unsigned irq = desc->irq_data.irq;
1528	struct irqaction *action, **action_ptr;
1529	unsigned long flags;
1530
1531	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1532
1533	if (!desc)
1534		return NULL;
1535
1536	mutex_lock(&desc->request_mutex);
1537	chip_bus_lock(desc);
1538	raw_spin_lock_irqsave(&desc->lock, flags);
1539
1540	/*
1541	 * There can be multiple actions per IRQ descriptor, find the right
1542	 * one based on the dev_id:
1543	 */
1544	action_ptr = &desc->action;
1545	for (;;) {
1546		action = *action_ptr;
1547
1548		if (!action) {
1549			WARN(1, "Trying to free already-free IRQ %d\n", irq);
1550			raw_spin_unlock_irqrestore(&desc->lock, flags);
1551			chip_bus_sync_unlock(desc);
1552			mutex_unlock(&desc->request_mutex);
1553			return NULL;
1554		}
1555
1556		if (action->dev_id == dev_id)
1557			break;
1558		action_ptr = &action->next;
1559	}
1560
1561	/* Found it - now remove it from the list of entries: */
1562	*action_ptr = action->next;
1563
1564	irq_pm_remove_action(desc, action);
1565
1566	/* If this was the last handler, shut down the IRQ line: */
1567	if (!desc->action) {
1568		irq_settings_clr_disable_unlazy(desc);
1569		irq_shutdown(desc);
 
1570	}
1571
1572#ifdef CONFIG_SMP
1573	/* make sure affinity_hint is cleaned up */
1574	if (WARN_ON_ONCE(desc->affinity_hint))
1575		desc->affinity_hint = NULL;
1576#endif
1577
1578	raw_spin_unlock_irqrestore(&desc->lock, flags);
1579	/*
1580	 * Drop bus_lock here so the changes which were done in the chip
1581	 * callbacks above are synced out to the irq chips which hang
1582	 * behind a slow bus (I2C, SPI) before calling synchronize_irq().
1583	 *
1584	 * Aside of that the bus_lock can also be taken from the threaded
1585	 * handler in irq_finalize_oneshot() which results in a deadlock
1586	 * because synchronize_irq() would wait forever for the thread to
1587	 * complete, which is blocked on the bus lock.
1588	 *
1589	 * The still held desc->request_mutex() protects against a
1590	 * concurrent request_irq() of this irq so the release of resources
1591	 * and timing data is properly serialized.
1592	 */
1593	chip_bus_sync_unlock(desc);
1594
1595	unregister_handler_proc(irq, action);
1596
1597	/* Make sure it's not being used on another CPU: */
1598	synchronize_irq(irq);
1599
1600#ifdef CONFIG_DEBUG_SHIRQ
1601	/*
1602	 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1603	 * event to happen even now it's being freed, so let's make sure that
1604	 * is so by doing an extra call to the handler ....
1605	 *
1606	 * ( We do this after actually deregistering it, to make sure that a
1607	 *   'real' IRQ doesn't run in * parallel with our fake. )
1608	 */
1609	if (action->flags & IRQF_SHARED) {
1610		local_irq_save(flags);
1611		action->handler(irq, dev_id);
1612		local_irq_restore(flags);
1613	}
1614#endif
1615
1616	if (action->thread) {
1617		kthread_stop(action->thread);
1618		put_task_struct(action->thread);
1619		if (action->secondary && action->secondary->thread) {
1620			kthread_stop(action->secondary->thread);
1621			put_task_struct(action->secondary->thread);
1622		}
1623	}
1624
1625	/* Last action releases resources */
1626	if (!desc->action) {
1627		/*
1628		 * Reaquire bus lock as irq_release_resources() might
1629		 * require it to deallocate resources over the slow bus.
1630		 */
1631		chip_bus_lock(desc);
1632		irq_release_resources(desc);
1633		chip_bus_sync_unlock(desc);
1634		irq_remove_timings(desc);
1635	}
1636
1637	mutex_unlock(&desc->request_mutex);
1638
1639	irq_chip_pm_put(&desc->irq_data);
1640	module_put(desc->owner);
1641	kfree(action->secondary);
1642	return action;
1643}
1644
1645/**
1646 *	remove_irq - free an interrupt
1647 *	@irq: Interrupt line to free
1648 *	@act: irqaction for the interrupt
1649 *
1650 * Used to remove interrupts statically setup by the early boot process.
1651 */
1652void remove_irq(unsigned int irq, struct irqaction *act)
1653{
1654	struct irq_desc *desc = irq_to_desc(irq);
1655
1656	if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1657		__free_irq(desc, act->dev_id);
1658}
1659EXPORT_SYMBOL_GPL(remove_irq);
1660
1661/**
1662 *	free_irq - free an interrupt allocated with request_irq
1663 *	@irq: Interrupt line to free
1664 *	@dev_id: Device identity to free
1665 *
1666 *	Remove an interrupt handler. The handler is removed and if the
1667 *	interrupt line is no longer in use by any driver it is disabled.
1668 *	On a shared IRQ the caller must ensure the interrupt is disabled
1669 *	on the card it drives before calling this function. The function
1670 *	does not return until any executing interrupts for this IRQ
1671 *	have completed.
1672 *
1673 *	This function must not be called from interrupt context.
1674 *
1675 *	Returns the devname argument passed to request_irq.
1676 */
1677const void *free_irq(unsigned int irq, void *dev_id)
1678{
1679	struct irq_desc *desc = irq_to_desc(irq);
1680	struct irqaction *action;
1681	const char *devname;
1682
1683	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1684		return NULL;
1685
1686#ifdef CONFIG_SMP
1687	if (WARN_ON(desc->affinity_notify))
1688		desc->affinity_notify = NULL;
1689#endif
1690
1691	action = __free_irq(desc, dev_id);
1692
1693	if (!action)
1694		return NULL;
1695
1696	devname = action->name;
1697	kfree(action);
1698	return devname;
1699}
1700EXPORT_SYMBOL(free_irq);
1701
1702/**
1703 *	request_threaded_irq - allocate an interrupt line
1704 *	@irq: Interrupt line to allocate
1705 *	@handler: Function to be called when the IRQ occurs.
1706 *		  Primary handler for threaded interrupts
1707 *		  If NULL and thread_fn != NULL the default
1708 *		  primary handler is installed
1709 *	@thread_fn: Function called from the irq handler thread
1710 *		    If NULL, no irq thread is created
1711 *	@irqflags: Interrupt type flags
1712 *	@devname: An ascii name for the claiming device
1713 *	@dev_id: A cookie passed back to the handler function
1714 *
1715 *	This call allocates interrupt resources and enables the
1716 *	interrupt line and IRQ handling. From the point this
1717 *	call is made your handler function may be invoked. Since
1718 *	your handler function must clear any interrupt the board
1719 *	raises, you must take care both to initialise your hardware
1720 *	and to set up the interrupt handler in the right order.
1721 *
1722 *	If you want to set up a threaded irq handler for your device
1723 *	then you need to supply @handler and @thread_fn. @handler is
1724 *	still called in hard interrupt context and has to check
1725 *	whether the interrupt originates from the device. If yes it
1726 *	needs to disable the interrupt on the device and return
1727 *	IRQ_WAKE_THREAD which will wake up the handler thread and run
1728 *	@thread_fn. This split handler design is necessary to support
1729 *	shared interrupts.
1730 *
1731 *	Dev_id must be globally unique. Normally the address of the
1732 *	device data structure is used as the cookie. Since the handler
1733 *	receives this value it makes sense to use it.
1734 *
1735 *	If your interrupt is shared you must pass a non NULL dev_id
1736 *	as this is required when freeing the interrupt.
1737 *
1738 *	Flags:
1739 *
1740 *	IRQF_SHARED		Interrupt is shared
1741 *	IRQF_TRIGGER_*		Specify active edge(s) or level
1742 *
1743 */
1744int request_threaded_irq(unsigned int irq, irq_handler_t handler,
1745			 irq_handler_t thread_fn, unsigned long irqflags,
1746			 const char *devname, void *dev_id)
1747{
1748	struct irqaction *action;
1749	struct irq_desc *desc;
1750	int retval;
1751
1752	if (irq == IRQ_NOTCONNECTED)
1753		return -ENOTCONN;
1754
1755	/*
1756	 * Sanity-check: shared interrupts must pass in a real dev-ID,
1757	 * otherwise we'll have trouble later trying to figure out
1758	 * which interrupt is which (messes up the interrupt freeing
1759	 * logic etc).
1760	 *
1761	 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
1762	 * it cannot be set along with IRQF_NO_SUSPEND.
1763	 */
1764	if (((irqflags & IRQF_SHARED) && !dev_id) ||
1765	    (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
1766	    ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
1767		return -EINVAL;
1768
1769	desc = irq_to_desc(irq);
1770	if (!desc)
1771		return -EINVAL;
1772
1773	if (!irq_settings_can_request(desc) ||
1774	    WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1775		return -EINVAL;
1776
1777	if (!handler) {
1778		if (!thread_fn)
1779			return -EINVAL;
1780		handler = irq_default_primary_handler;
1781	}
1782
1783	action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1784	if (!action)
1785		return -ENOMEM;
1786
1787	action->handler = handler;
1788	action->thread_fn = thread_fn;
1789	action->flags = irqflags;
1790	action->name = devname;
1791	action->dev_id = dev_id;
1792
1793	retval = irq_chip_pm_get(&desc->irq_data);
1794	if (retval < 0) {
1795		kfree(action);
1796		return retval;
1797	}
1798
 
1799	retval = __setup_irq(irq, desc, action);
 
1800
1801	if (retval) {
1802		irq_chip_pm_put(&desc->irq_data);
1803		kfree(action->secondary);
1804		kfree(action);
1805	}
1806
1807#ifdef CONFIG_DEBUG_SHIRQ_FIXME
1808	if (!retval && (irqflags & IRQF_SHARED)) {
1809		/*
1810		 * It's a shared IRQ -- the driver ought to be prepared for it
1811		 * to happen immediately, so let's make sure....
1812		 * We disable the irq to make sure that a 'real' IRQ doesn't
1813		 * run in parallel with our fake.
1814		 */
1815		unsigned long flags;
1816
1817		disable_irq(irq);
1818		local_irq_save(flags);
1819
1820		handler(irq, dev_id);
1821
1822		local_irq_restore(flags);
1823		enable_irq(irq);
1824	}
1825#endif
1826	return retval;
1827}
1828EXPORT_SYMBOL(request_threaded_irq);
1829
1830/**
1831 *	request_any_context_irq - allocate an interrupt line
1832 *	@irq: Interrupt line to allocate
1833 *	@handler: Function to be called when the IRQ occurs.
1834 *		  Threaded handler for threaded interrupts.
1835 *	@flags: Interrupt type flags
1836 *	@name: An ascii name for the claiming device
1837 *	@dev_id: A cookie passed back to the handler function
1838 *
1839 *	This call allocates interrupt resources and enables the
1840 *	interrupt line and IRQ handling. It selects either a
1841 *	hardirq or threaded handling method depending on the
1842 *	context.
1843 *
1844 *	On failure, it returns a negative value. On success,
1845 *	it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
1846 */
1847int request_any_context_irq(unsigned int irq, irq_handler_t handler,
1848			    unsigned long flags, const char *name, void *dev_id)
1849{
1850	struct irq_desc *desc;
1851	int ret;
1852
1853	if (irq == IRQ_NOTCONNECTED)
1854		return -ENOTCONN;
1855
1856	desc = irq_to_desc(irq);
1857	if (!desc)
1858		return -EINVAL;
1859
1860	if (irq_settings_is_nested_thread(desc)) {
1861		ret = request_threaded_irq(irq, NULL, handler,
1862					   flags, name, dev_id);
1863		return !ret ? IRQC_IS_NESTED : ret;
1864	}
1865
1866	ret = request_irq(irq, handler, flags, name, dev_id);
1867	return !ret ? IRQC_IS_HARDIRQ : ret;
1868}
1869EXPORT_SYMBOL_GPL(request_any_context_irq);
1870
1871void enable_percpu_irq(unsigned int irq, unsigned int type)
1872{
1873	unsigned int cpu = smp_processor_id();
1874	unsigned long flags;
1875	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1876
1877	if (!desc)
1878		return;
1879
1880	/*
1881	 * If the trigger type is not specified by the caller, then
1882	 * use the default for this interrupt.
1883	 */
1884	type &= IRQ_TYPE_SENSE_MASK;
1885	if (type == IRQ_TYPE_NONE)
1886		type = irqd_get_trigger_type(&desc->irq_data);
1887
1888	if (type != IRQ_TYPE_NONE) {
1889		int ret;
1890
1891		ret = __irq_set_trigger(desc, type);
1892
1893		if (ret) {
1894			WARN(1, "failed to set type for IRQ%d\n", irq);
1895			goto out;
1896		}
1897	}
1898
1899	irq_percpu_enable(desc, cpu);
1900out:
1901	irq_put_desc_unlock(desc, flags);
1902}
1903EXPORT_SYMBOL_GPL(enable_percpu_irq);
1904
1905/**
1906 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
1907 * @irq:	Linux irq number to check for
1908 *
1909 * Must be called from a non migratable context. Returns the enable
1910 * state of a per cpu interrupt on the current cpu.
1911 */
1912bool irq_percpu_is_enabled(unsigned int irq)
1913{
1914	unsigned int cpu = smp_processor_id();
1915	struct irq_desc *desc;
1916	unsigned long flags;
1917	bool is_enabled;
1918
1919	desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1920	if (!desc)
1921		return false;
1922
1923	is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
1924	irq_put_desc_unlock(desc, flags);
1925
1926	return is_enabled;
1927}
1928EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
1929
1930void disable_percpu_irq(unsigned int irq)
1931{
1932	unsigned int cpu = smp_processor_id();
1933	unsigned long flags;
1934	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1935
1936	if (!desc)
1937		return;
1938
1939	irq_percpu_disable(desc, cpu);
1940	irq_put_desc_unlock(desc, flags);
1941}
1942EXPORT_SYMBOL_GPL(disable_percpu_irq);
1943
1944/*
1945 * Internal function to unregister a percpu irqaction.
1946 */
1947static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
1948{
1949	struct irq_desc *desc = irq_to_desc(irq);
1950	struct irqaction *action;
1951	unsigned long flags;
1952
1953	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1954
1955	if (!desc)
1956		return NULL;
1957
1958	raw_spin_lock_irqsave(&desc->lock, flags);
1959
1960	action = desc->action;
1961	if (!action || action->percpu_dev_id != dev_id) {
1962		WARN(1, "Trying to free already-free IRQ %d\n", irq);
1963		goto bad;
1964	}
1965
1966	if (!cpumask_empty(desc->percpu_enabled)) {
1967		WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
1968		     irq, cpumask_first(desc->percpu_enabled));
1969		goto bad;
1970	}
1971
1972	/* Found it - now remove it from the list of entries: */
1973	desc->action = NULL;
1974
1975	raw_spin_unlock_irqrestore(&desc->lock, flags);
1976
1977	unregister_handler_proc(irq, action);
1978
1979	irq_chip_pm_put(&desc->irq_data);
1980	module_put(desc->owner);
1981	return action;
1982
1983bad:
1984	raw_spin_unlock_irqrestore(&desc->lock, flags);
1985	return NULL;
1986}
1987
1988/**
1989 *	remove_percpu_irq - free a per-cpu interrupt
1990 *	@irq: Interrupt line to free
1991 *	@act: irqaction for the interrupt
1992 *
1993 * Used to remove interrupts statically setup by the early boot process.
1994 */
1995void remove_percpu_irq(unsigned int irq, struct irqaction *act)
1996{
1997	struct irq_desc *desc = irq_to_desc(irq);
1998
1999	if (desc && irq_settings_is_per_cpu_devid(desc))
2000	    __free_percpu_irq(irq, act->percpu_dev_id);
2001}
2002
2003/**
2004 *	free_percpu_irq - free an interrupt allocated with request_percpu_irq
2005 *	@irq: Interrupt line to free
2006 *	@dev_id: Device identity to free
2007 *
2008 *	Remove a percpu interrupt handler. The handler is removed, but
2009 *	the interrupt line is not disabled. This must be done on each
2010 *	CPU before calling this function. The function does not return
2011 *	until any executing interrupts for this IRQ have completed.
2012 *
2013 *	This function must not be called from interrupt context.
2014 */
2015void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
2016{
2017	struct irq_desc *desc = irq_to_desc(irq);
2018
2019	if (!desc || !irq_settings_is_per_cpu_devid(desc))
2020		return;
2021
2022	chip_bus_lock(desc);
2023	kfree(__free_percpu_irq(irq, dev_id));
2024	chip_bus_sync_unlock(desc);
2025}
2026EXPORT_SYMBOL_GPL(free_percpu_irq);
2027
2028/**
2029 *	setup_percpu_irq - setup a per-cpu interrupt
2030 *	@irq: Interrupt line to setup
2031 *	@act: irqaction for the interrupt
2032 *
2033 * Used to statically setup per-cpu interrupts in the early boot process.
2034 */
2035int setup_percpu_irq(unsigned int irq, struct irqaction *act)
2036{
2037	struct irq_desc *desc = irq_to_desc(irq);
2038	int retval;
2039
2040	if (!desc || !irq_settings_is_per_cpu_devid(desc))
2041		return -EINVAL;
2042
2043	retval = irq_chip_pm_get(&desc->irq_data);
2044	if (retval < 0)
2045		return retval;
2046
 
2047	retval = __setup_irq(irq, desc, act);
 
2048
2049	if (retval)
2050		irq_chip_pm_put(&desc->irq_data);
2051
2052	return retval;
2053}
2054
2055/**
2056 *	__request_percpu_irq - allocate a percpu interrupt line
2057 *	@irq: Interrupt line to allocate
2058 *	@handler: Function to be called when the IRQ occurs.
2059 *	@flags: Interrupt type flags (IRQF_TIMER only)
2060 *	@devname: An ascii name for the claiming device
2061 *	@dev_id: A percpu cookie passed back to the handler function
2062 *
2063 *	This call allocates interrupt resources and enables the
2064 *	interrupt on the local CPU. If the interrupt is supposed to be
2065 *	enabled on other CPUs, it has to be done on each CPU using
2066 *	enable_percpu_irq().
2067 *
2068 *	Dev_id must be globally unique. It is a per-cpu variable, and
2069 *	the handler gets called with the interrupted CPU's instance of
2070 *	that variable.
2071 */
2072int __request_percpu_irq(unsigned int irq, irq_handler_t handler,
2073			 unsigned long flags, const char *devname,
2074			 void __percpu *dev_id)
2075{
2076	struct irqaction *action;
2077	struct irq_desc *desc;
2078	int retval;
2079
2080	if (!dev_id)
2081		return -EINVAL;
2082
2083	desc = irq_to_desc(irq);
2084	if (!desc || !irq_settings_can_request(desc) ||
2085	    !irq_settings_is_per_cpu_devid(desc))
2086		return -EINVAL;
2087
2088	if (flags && flags != IRQF_TIMER)
2089		return -EINVAL;
2090
2091	action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
2092	if (!action)
2093		return -ENOMEM;
2094
2095	action->handler = handler;
2096	action->flags = flags | IRQF_PERCPU | IRQF_NO_SUSPEND;
2097	action->name = devname;
2098	action->percpu_dev_id = dev_id;
2099
2100	retval = irq_chip_pm_get(&desc->irq_data);
2101	if (retval < 0) {
2102		kfree(action);
2103		return retval;
2104	}
2105
 
2106	retval = __setup_irq(irq, desc, action);
 
2107
2108	if (retval) {
2109		irq_chip_pm_put(&desc->irq_data);
2110		kfree(action);
2111	}
2112
2113	return retval;
2114}
2115EXPORT_SYMBOL_GPL(__request_percpu_irq);
2116
2117/**
2118 *	irq_get_irqchip_state - returns the irqchip state of a interrupt.
2119 *	@irq: Interrupt line that is forwarded to a VM
2120 *	@which: One of IRQCHIP_STATE_* the caller wants to know about
2121 *	@state: a pointer to a boolean where the state is to be storeed
2122 *
2123 *	This call snapshots the internal irqchip state of an
2124 *	interrupt, returning into @state the bit corresponding to
2125 *	stage @which
2126 *
2127 *	This function should be called with preemption disabled if the
2128 *	interrupt controller has per-cpu registers.
2129 */
2130int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2131			  bool *state)
2132{
2133	struct irq_desc *desc;
2134	struct irq_data *data;
2135	struct irq_chip *chip;
2136	unsigned long flags;
2137	int err = -EINVAL;
2138
2139	desc = irq_get_desc_buslock(irq, &flags, 0);
2140	if (!desc)
2141		return err;
2142
2143	data = irq_desc_get_irq_data(desc);
2144
2145	do {
2146		chip = irq_data_get_irq_chip(data);
2147		if (chip->irq_get_irqchip_state)
2148			break;
2149#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2150		data = data->parent_data;
2151#else
2152		data = NULL;
2153#endif
2154	} while (data);
2155
2156	if (data)
2157		err = chip->irq_get_irqchip_state(data, which, state);
2158
2159	irq_put_desc_busunlock(desc, flags);
2160	return err;
2161}
2162EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2163
2164/**
2165 *	irq_set_irqchip_state - set the state of a forwarded interrupt.
2166 *	@irq: Interrupt line that is forwarded to a VM
2167 *	@which: State to be restored (one of IRQCHIP_STATE_*)
2168 *	@val: Value corresponding to @which
2169 *
2170 *	This call sets the internal irqchip state of an interrupt,
2171 *	depending on the value of @which.
2172 *
2173 *	This function should be called with preemption disabled if the
2174 *	interrupt controller has per-cpu registers.
2175 */
2176int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2177			  bool val)
2178{
2179	struct irq_desc *desc;
2180	struct irq_data *data;
2181	struct irq_chip *chip;
2182	unsigned long flags;
2183	int err = -EINVAL;
2184
2185	desc = irq_get_desc_buslock(irq, &flags, 0);
2186	if (!desc)
2187		return err;
2188
2189	data = irq_desc_get_irq_data(desc);
2190
2191	do {
2192		chip = irq_data_get_irq_chip(data);
2193		if (chip->irq_set_irqchip_state)
2194			break;
2195#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2196		data = data->parent_data;
2197#else
2198		data = NULL;
2199#endif
2200	} while (data);
2201
2202	if (data)
2203		err = chip->irq_set_irqchip_state(data, which, val);
2204
2205	irq_put_desc_busunlock(desc, flags);
2206	return err;
2207}
2208EXPORT_SYMBOL_GPL(irq_set_irqchip_state);
v4.10.11
 
   1/*
   2 * linux/kernel/irq/manage.c
   3 *
   4 * Copyright (C) 1992, 1998-2006 Linus Torvalds, Ingo Molnar
   5 * Copyright (C) 2005-2006 Thomas Gleixner
   6 *
   7 * This file contains driver APIs to the irq subsystem.
   8 */
   9
  10#define pr_fmt(fmt) "genirq: " fmt
  11
  12#include <linux/irq.h>
  13#include <linux/kthread.h>
  14#include <linux/module.h>
  15#include <linux/random.h>
  16#include <linux/interrupt.h>
  17#include <linux/slab.h>
  18#include <linux/sched.h>
  19#include <linux/sched/rt.h>
 
 
  20#include <linux/task_work.h>
  21
  22#include "internals.h"
  23
  24#ifdef CONFIG_IRQ_FORCED_THREADING
  25__read_mostly bool force_irqthreads;
  26
  27static int __init setup_forced_irqthreads(char *arg)
  28{
  29	force_irqthreads = true;
  30	return 0;
  31}
  32early_param("threadirqs", setup_forced_irqthreads);
  33#endif
  34
  35static void __synchronize_hardirq(struct irq_desc *desc)
  36{
  37	bool inprogress;
  38
  39	do {
  40		unsigned long flags;
  41
  42		/*
  43		 * Wait until we're out of the critical section.  This might
  44		 * give the wrong answer due to the lack of memory barriers.
  45		 */
  46		while (irqd_irq_inprogress(&desc->irq_data))
  47			cpu_relax();
  48
  49		/* Ok, that indicated we're done: double-check carefully. */
  50		raw_spin_lock_irqsave(&desc->lock, flags);
  51		inprogress = irqd_irq_inprogress(&desc->irq_data);
  52		raw_spin_unlock_irqrestore(&desc->lock, flags);
  53
  54		/* Oops, that failed? */
  55	} while (inprogress);
  56}
  57
  58/**
  59 *	synchronize_hardirq - wait for pending hard IRQ handlers (on other CPUs)
  60 *	@irq: interrupt number to wait for
  61 *
  62 *	This function waits for any pending hard IRQ handlers for this
  63 *	interrupt to complete before returning. If you use this
  64 *	function while holding a resource the IRQ handler may need you
  65 *	will deadlock. It does not take associated threaded handlers
  66 *	into account.
  67 *
  68 *	Do not use this for shutdown scenarios where you must be sure
  69 *	that all parts (hardirq and threaded handler) have completed.
  70 *
  71 *	Returns: false if a threaded handler is active.
  72 *
  73 *	This function may be called - with care - from IRQ context.
  74 */
  75bool synchronize_hardirq(unsigned int irq)
  76{
  77	struct irq_desc *desc = irq_to_desc(irq);
  78
  79	if (desc) {
  80		__synchronize_hardirq(desc);
  81		return !atomic_read(&desc->threads_active);
  82	}
  83
  84	return true;
  85}
  86EXPORT_SYMBOL(synchronize_hardirq);
  87
  88/**
  89 *	synchronize_irq - wait for pending IRQ handlers (on other CPUs)
  90 *	@irq: interrupt number to wait for
  91 *
  92 *	This function waits for any pending IRQ handlers for this interrupt
  93 *	to complete before returning. If you use this function while
  94 *	holding a resource the IRQ handler may need you will deadlock.
  95 *
  96 *	This function may be called - with care - from IRQ context.
  97 */
  98void synchronize_irq(unsigned int irq)
  99{
 100	struct irq_desc *desc = irq_to_desc(irq);
 101
 102	if (desc) {
 103		__synchronize_hardirq(desc);
 104		/*
 105		 * We made sure that no hardirq handler is
 106		 * running. Now verify that no threaded handlers are
 107		 * active.
 108		 */
 109		wait_event(desc->wait_for_threads,
 110			   !atomic_read(&desc->threads_active));
 111	}
 112}
 113EXPORT_SYMBOL(synchronize_irq);
 114
 115#ifdef CONFIG_SMP
 116cpumask_var_t irq_default_affinity;
 117
 118static bool __irq_can_set_affinity(struct irq_desc *desc)
 119{
 120	if (!desc || !irqd_can_balance(&desc->irq_data) ||
 121	    !desc->irq_data.chip || !desc->irq_data.chip->irq_set_affinity)
 122		return false;
 123	return true;
 124}
 125
 126/**
 127 *	irq_can_set_affinity - Check if the affinity of a given irq can be set
 128 *	@irq:		Interrupt to check
 129 *
 130 */
 131int irq_can_set_affinity(unsigned int irq)
 132{
 133	return __irq_can_set_affinity(irq_to_desc(irq));
 134}
 135
 136/**
 137 * irq_can_set_affinity_usr - Check if affinity of a irq can be set from user space
 138 * @irq:	Interrupt to check
 139 *
 140 * Like irq_can_set_affinity() above, but additionally checks for the
 141 * AFFINITY_MANAGED flag.
 142 */
 143bool irq_can_set_affinity_usr(unsigned int irq)
 144{
 145	struct irq_desc *desc = irq_to_desc(irq);
 146
 147	return __irq_can_set_affinity(desc) &&
 148		!irqd_affinity_is_managed(&desc->irq_data);
 149}
 150
 151/**
 152 *	irq_set_thread_affinity - Notify irq threads to adjust affinity
 153 *	@desc:		irq descriptor which has affitnity changed
 154 *
 155 *	We just set IRQTF_AFFINITY and delegate the affinity setting
 156 *	to the interrupt thread itself. We can not call
 157 *	set_cpus_allowed_ptr() here as we hold desc->lock and this
 158 *	code can be called from hard interrupt context.
 159 */
 160void irq_set_thread_affinity(struct irq_desc *desc)
 161{
 162	struct irqaction *action;
 163
 164	for_each_action_of_desc(desc, action)
 165		if (action->thread)
 166			set_bit(IRQTF_AFFINITY, &action->thread_flags);
 167}
 168
 169#ifdef CONFIG_GENERIC_PENDING_IRQ
 170static inline bool irq_can_move_pcntxt(struct irq_data *data)
 171{
 172	return irqd_can_move_in_process_context(data);
 173}
 174static inline bool irq_move_pending(struct irq_data *data)
 175{
 176	return irqd_is_setaffinity_pending(data);
 177}
 178static inline void
 179irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask)
 180{
 181	cpumask_copy(desc->pending_mask, mask);
 182}
 183static inline void
 184irq_get_pending(struct cpumask *mask, struct irq_desc *desc)
 185{
 186	cpumask_copy(mask, desc->pending_mask);
 187}
 188#else
 189static inline bool irq_can_move_pcntxt(struct irq_data *data) { return true; }
 190static inline bool irq_move_pending(struct irq_data *data) { return false; }
 191static inline void
 192irq_copy_pending(struct irq_desc *desc, const struct cpumask *mask) { }
 193static inline void
 194irq_get_pending(struct cpumask *mask, struct irq_desc *desc) { }
 195#endif
 196
 197int irq_do_set_affinity(struct irq_data *data, const struct cpumask *mask,
 198			bool force)
 199{
 200	struct irq_desc *desc = irq_data_to_desc(data);
 201	struct irq_chip *chip = irq_data_get_irq_chip(data);
 202	int ret;
 203
 
 
 
 204	ret = chip->irq_set_affinity(data, mask, force);
 205	switch (ret) {
 206	case IRQ_SET_MASK_OK:
 207	case IRQ_SET_MASK_OK_DONE:
 208		cpumask_copy(desc->irq_common_data.affinity, mask);
 209	case IRQ_SET_MASK_OK_NOCOPY:
 
 210		irq_set_thread_affinity(desc);
 211		ret = 0;
 212	}
 213
 214	return ret;
 215}
 216
 217int irq_set_affinity_locked(struct irq_data *data, const struct cpumask *mask,
 218			    bool force)
 219{
 220	struct irq_chip *chip = irq_data_get_irq_chip(data);
 221	struct irq_desc *desc = irq_data_to_desc(data);
 222	int ret = 0;
 223
 224	if (!chip || !chip->irq_set_affinity)
 225		return -EINVAL;
 226
 227	if (irq_can_move_pcntxt(data)) {
 228		ret = irq_do_set_affinity(data, mask, force);
 229	} else {
 230		irqd_set_move_pending(data);
 231		irq_copy_pending(desc, mask);
 232	}
 233
 234	if (desc->affinity_notify) {
 235		kref_get(&desc->affinity_notify->kref);
 236		schedule_work(&desc->affinity_notify->work);
 237	}
 238	irqd_set(data, IRQD_AFFINITY_SET);
 239
 240	return ret;
 241}
 242
 243int __irq_set_affinity(unsigned int irq, const struct cpumask *mask, bool force)
 244{
 245	struct irq_desc *desc = irq_to_desc(irq);
 246	unsigned long flags;
 247	int ret;
 248
 249	if (!desc)
 250		return -EINVAL;
 251
 252	raw_spin_lock_irqsave(&desc->lock, flags);
 253	ret = irq_set_affinity_locked(irq_desc_get_irq_data(desc), mask, force);
 254	raw_spin_unlock_irqrestore(&desc->lock, flags);
 255	return ret;
 256}
 257
 258int irq_set_affinity_hint(unsigned int irq, const struct cpumask *m)
 259{
 260	unsigned long flags;
 261	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 262
 263	if (!desc)
 264		return -EINVAL;
 265	desc->affinity_hint = m;
 266	irq_put_desc_unlock(desc, flags);
 267	/* set the initial affinity to prevent every interrupt being on CPU0 */
 268	if (m)
 269		__irq_set_affinity(irq, m, false);
 270	return 0;
 271}
 272EXPORT_SYMBOL_GPL(irq_set_affinity_hint);
 273
 274static void irq_affinity_notify(struct work_struct *work)
 275{
 276	struct irq_affinity_notify *notify =
 277		container_of(work, struct irq_affinity_notify, work);
 278	struct irq_desc *desc = irq_to_desc(notify->irq);
 279	cpumask_var_t cpumask;
 280	unsigned long flags;
 281
 282	if (!desc || !alloc_cpumask_var(&cpumask, GFP_KERNEL))
 283		goto out;
 284
 285	raw_spin_lock_irqsave(&desc->lock, flags);
 286	if (irq_move_pending(&desc->irq_data))
 287		irq_get_pending(cpumask, desc);
 288	else
 289		cpumask_copy(cpumask, desc->irq_common_data.affinity);
 290	raw_spin_unlock_irqrestore(&desc->lock, flags);
 291
 292	notify->notify(notify, cpumask);
 293
 294	free_cpumask_var(cpumask);
 295out:
 296	kref_put(&notify->kref, notify->release);
 297}
 298
 299/**
 300 *	irq_set_affinity_notifier - control notification of IRQ affinity changes
 301 *	@irq:		Interrupt for which to enable/disable notification
 302 *	@notify:	Context for notification, or %NULL to disable
 303 *			notification.  Function pointers must be initialised;
 304 *			the other fields will be initialised by this function.
 305 *
 306 *	Must be called in process context.  Notification may only be enabled
 307 *	after the IRQ is allocated and must be disabled before the IRQ is
 308 *	freed using free_irq().
 309 */
 310int
 311irq_set_affinity_notifier(unsigned int irq, struct irq_affinity_notify *notify)
 312{
 313	struct irq_desc *desc = irq_to_desc(irq);
 314	struct irq_affinity_notify *old_notify;
 315	unsigned long flags;
 316
 317	/* The release function is promised process context */
 318	might_sleep();
 319
 320	if (!desc)
 321		return -EINVAL;
 322
 323	/* Complete initialisation of *notify */
 324	if (notify) {
 325		notify->irq = irq;
 326		kref_init(&notify->kref);
 327		INIT_WORK(&notify->work, irq_affinity_notify);
 328	}
 329
 330	raw_spin_lock_irqsave(&desc->lock, flags);
 331	old_notify = desc->affinity_notify;
 332	desc->affinity_notify = notify;
 333	raw_spin_unlock_irqrestore(&desc->lock, flags);
 334
 335	if (old_notify)
 336		kref_put(&old_notify->kref, old_notify->release);
 337
 338	return 0;
 339}
 340EXPORT_SYMBOL_GPL(irq_set_affinity_notifier);
 341
 342#ifndef CONFIG_AUTO_IRQ_AFFINITY
 343/*
 344 * Generic version of the affinity autoselector.
 345 */
 346static int setup_affinity(struct irq_desc *desc, struct cpumask *mask)
 347{
 348	struct cpumask *set = irq_default_affinity;
 349	int node = irq_desc_get_node(desc);
 
 
 350
 351	/* Excludes PER_CPU and NO_BALANCE interrupts */
 352	if (!__irq_can_set_affinity(desc))
 353		return 0;
 354
 
 355	/*
 356	 * Preserve the managed affinity setting and an userspace affinity
 357	 * setup, but make sure that one of the targets is online.
 358	 */
 359	if (irqd_affinity_is_managed(&desc->irq_data) ||
 360	    irqd_has_set(&desc->irq_data, IRQD_AFFINITY_SET)) {
 361		if (cpumask_intersects(desc->irq_common_data.affinity,
 362				       cpu_online_mask))
 363			set = desc->irq_common_data.affinity;
 364		else
 365			irqd_clear(&desc->irq_data, IRQD_AFFINITY_SET);
 366	}
 367
 368	cpumask_and(mask, cpu_online_mask, set);
 369	if (node != NUMA_NO_NODE) {
 370		const struct cpumask *nodemask = cpumask_of_node(node);
 371
 372		/* make sure at least one of the cpus in nodemask is online */
 373		if (cpumask_intersects(mask, nodemask))
 374			cpumask_and(mask, mask, nodemask);
 375	}
 376	irq_do_set_affinity(&desc->irq_data, mask, false);
 377	return 0;
 
 378}
 379#else
 380/* Wrapper for ALPHA specific affinity selector magic */
 381static inline int setup_affinity(struct irq_desc *d, struct cpumask *mask)
 382{
 383	return irq_select_affinity(irq_desc_get_irq(d));
 384}
 385#endif
 386
 387/*
 388 * Called when affinity is set via /proc/irq
 389 */
 390int irq_select_affinity_usr(unsigned int irq, struct cpumask *mask)
 391{
 392	struct irq_desc *desc = irq_to_desc(irq);
 393	unsigned long flags;
 394	int ret;
 395
 396	raw_spin_lock_irqsave(&desc->lock, flags);
 397	ret = setup_affinity(desc, mask);
 398	raw_spin_unlock_irqrestore(&desc->lock, flags);
 399	return ret;
 400}
 401
 402#else
 403static inline int
 404setup_affinity(struct irq_desc *desc, struct cpumask *mask)
 405{
 406	return 0;
 407}
 408#endif
 409
 410/**
 411 *	irq_set_vcpu_affinity - Set vcpu affinity for the interrupt
 412 *	@irq: interrupt number to set affinity
 413 *	@vcpu_info: vCPU specific data
 
 414 *
 415 *	This function uses the vCPU specific data to set the vCPU
 416 *	affinity for an irq. The vCPU specific data is passed from
 417 *	outside, such as KVM. One example code path is as below:
 418 *	KVM -> IOMMU -> irq_set_vcpu_affinity().
 419 */
 420int irq_set_vcpu_affinity(unsigned int irq, void *vcpu_info)
 421{
 422	unsigned long flags;
 423	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 424	struct irq_data *data;
 425	struct irq_chip *chip;
 426	int ret = -ENOSYS;
 427
 428	if (!desc)
 429		return -EINVAL;
 430
 431	data = irq_desc_get_irq_data(desc);
 432	chip = irq_data_get_irq_chip(data);
 433	if (chip && chip->irq_set_vcpu_affinity)
 
 
 
 
 
 
 
 
 
 
 434		ret = chip->irq_set_vcpu_affinity(data, vcpu_info);
 435	irq_put_desc_unlock(desc, flags);
 436
 437	return ret;
 438}
 439EXPORT_SYMBOL_GPL(irq_set_vcpu_affinity);
 440
 441void __disable_irq(struct irq_desc *desc)
 442{
 443	if (!desc->depth++)
 444		irq_disable(desc);
 445}
 446
 447static int __disable_irq_nosync(unsigned int irq)
 448{
 449	unsigned long flags;
 450	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 451
 452	if (!desc)
 453		return -EINVAL;
 454	__disable_irq(desc);
 455	irq_put_desc_busunlock(desc, flags);
 456	return 0;
 457}
 458
 459/**
 460 *	disable_irq_nosync - disable an irq without waiting
 461 *	@irq: Interrupt to disable
 462 *
 463 *	Disable the selected interrupt line.  Disables and Enables are
 464 *	nested.
 465 *	Unlike disable_irq(), this function does not ensure existing
 466 *	instances of the IRQ handler have completed before returning.
 467 *
 468 *	This function may be called from IRQ context.
 469 */
 470void disable_irq_nosync(unsigned int irq)
 471{
 472	__disable_irq_nosync(irq);
 473}
 474EXPORT_SYMBOL(disable_irq_nosync);
 475
 476/**
 477 *	disable_irq - disable an irq and wait for completion
 478 *	@irq: Interrupt to disable
 479 *
 480 *	Disable the selected interrupt line.  Enables and Disables are
 481 *	nested.
 482 *	This function waits for any pending IRQ handlers for this interrupt
 483 *	to complete before returning. If you use this function while
 484 *	holding a resource the IRQ handler may need you will deadlock.
 485 *
 486 *	This function may be called - with care - from IRQ context.
 487 */
 488void disable_irq(unsigned int irq)
 489{
 490	if (!__disable_irq_nosync(irq))
 491		synchronize_irq(irq);
 492}
 493EXPORT_SYMBOL(disable_irq);
 494
 495/**
 496 *	disable_hardirq - disables an irq and waits for hardirq completion
 497 *	@irq: Interrupt to disable
 498 *
 499 *	Disable the selected interrupt line.  Enables and Disables are
 500 *	nested.
 501 *	This function waits for any pending hard IRQ handlers for this
 502 *	interrupt to complete before returning. If you use this function while
 503 *	holding a resource the hard IRQ handler may need you will deadlock.
 504 *
 505 *	When used to optimistically disable an interrupt from atomic context
 506 *	the return value must be checked.
 507 *
 508 *	Returns: false if a threaded handler is active.
 509 *
 510 *	This function may be called - with care - from IRQ context.
 511 */
 512bool disable_hardirq(unsigned int irq)
 513{
 514	if (!__disable_irq_nosync(irq))
 515		return synchronize_hardirq(irq);
 516
 517	return false;
 518}
 519EXPORT_SYMBOL_GPL(disable_hardirq);
 520
 521void __enable_irq(struct irq_desc *desc)
 522{
 523	switch (desc->depth) {
 524	case 0:
 525 err_out:
 526		WARN(1, KERN_WARNING "Unbalanced enable for IRQ %d\n",
 527		     irq_desc_get_irq(desc));
 528		break;
 529	case 1: {
 530		if (desc->istate & IRQS_SUSPENDED)
 531			goto err_out;
 532		/* Prevent probing on this irq: */
 533		irq_settings_set_noprobe(desc);
 534		irq_enable(desc);
 535		check_irq_resend(desc);
 536		/* fall-through */
 
 
 
 
 
 
 537	}
 538	default:
 539		desc->depth--;
 540	}
 541}
 542
 543/**
 544 *	enable_irq - enable handling of an irq
 545 *	@irq: Interrupt to enable
 546 *
 547 *	Undoes the effect of one call to disable_irq().  If this
 548 *	matches the last disable, processing of interrupts on this
 549 *	IRQ line is re-enabled.
 550 *
 551 *	This function may be called from IRQ context only when
 552 *	desc->irq_data.chip->bus_lock and desc->chip->bus_sync_unlock are NULL !
 553 */
 554void enable_irq(unsigned int irq)
 555{
 556	unsigned long flags;
 557	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 558
 559	if (!desc)
 560		return;
 561	if (WARN(!desc->irq_data.chip,
 562		 KERN_ERR "enable_irq before setup/request_irq: irq %u\n", irq))
 563		goto out;
 564
 565	__enable_irq(desc);
 566out:
 567	irq_put_desc_busunlock(desc, flags);
 568}
 569EXPORT_SYMBOL(enable_irq);
 570
 571static int set_irq_wake_real(unsigned int irq, unsigned int on)
 572{
 573	struct irq_desc *desc = irq_to_desc(irq);
 574	int ret = -ENXIO;
 575
 576	if (irq_desc_get_chip(desc)->flags &  IRQCHIP_SKIP_SET_WAKE)
 577		return 0;
 578
 579	if (desc->irq_data.chip->irq_set_wake)
 580		ret = desc->irq_data.chip->irq_set_wake(&desc->irq_data, on);
 581
 582	return ret;
 583}
 584
 585/**
 586 *	irq_set_irq_wake - control irq power management wakeup
 587 *	@irq:	interrupt to control
 588 *	@on:	enable/disable power management wakeup
 589 *
 590 *	Enable/disable power management wakeup mode, which is
 591 *	disabled by default.  Enables and disables must match,
 592 *	just as they match for non-wakeup mode support.
 593 *
 594 *	Wakeup mode lets this IRQ wake the system from sleep
 595 *	states like "suspend to RAM".
 596 */
 597int irq_set_irq_wake(unsigned int irq, unsigned int on)
 598{
 599	unsigned long flags;
 600	struct irq_desc *desc = irq_get_desc_buslock(irq, &flags, IRQ_GET_DESC_CHECK_GLOBAL);
 601	int ret = 0;
 602
 603	if (!desc)
 604		return -EINVAL;
 605
 606	/* wakeup-capable irqs can be shared between drivers that
 607	 * don't need to have the same sleep mode behaviors.
 608	 */
 609	if (on) {
 610		if (desc->wake_depth++ == 0) {
 611			ret = set_irq_wake_real(irq, on);
 612			if (ret)
 613				desc->wake_depth = 0;
 614			else
 615				irqd_set(&desc->irq_data, IRQD_WAKEUP_STATE);
 616		}
 617	} else {
 618		if (desc->wake_depth == 0) {
 619			WARN(1, "Unbalanced IRQ %d wake disable\n", irq);
 620		} else if (--desc->wake_depth == 0) {
 621			ret = set_irq_wake_real(irq, on);
 622			if (ret)
 623				desc->wake_depth = 1;
 624			else
 625				irqd_clear(&desc->irq_data, IRQD_WAKEUP_STATE);
 626		}
 627	}
 628	irq_put_desc_busunlock(desc, flags);
 629	return ret;
 630}
 631EXPORT_SYMBOL(irq_set_irq_wake);
 632
 633/*
 634 * Internal function that tells the architecture code whether a
 635 * particular irq has been exclusively allocated or is available
 636 * for driver use.
 637 */
 638int can_request_irq(unsigned int irq, unsigned long irqflags)
 639{
 640	unsigned long flags;
 641	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 642	int canrequest = 0;
 643
 644	if (!desc)
 645		return 0;
 646
 647	if (irq_settings_can_request(desc)) {
 648		if (!desc->action ||
 649		    irqflags & desc->action->flags & IRQF_SHARED)
 650			canrequest = 1;
 651	}
 652	irq_put_desc_unlock(desc, flags);
 653	return canrequest;
 654}
 655
 656int __irq_set_trigger(struct irq_desc *desc, unsigned long flags)
 657{
 658	struct irq_chip *chip = desc->irq_data.chip;
 659	int ret, unmask = 0;
 660
 661	if (!chip || !chip->irq_set_type) {
 662		/*
 663		 * IRQF_TRIGGER_* but the PIC does not support multiple
 664		 * flow-types?
 665		 */
 666		pr_debug("No set_type function for IRQ %d (%s)\n",
 667			 irq_desc_get_irq(desc),
 668			 chip ? (chip->name ? : "unknown") : "unknown");
 669		return 0;
 670	}
 671
 672	if (chip->flags & IRQCHIP_SET_TYPE_MASKED) {
 673		if (!irqd_irq_masked(&desc->irq_data))
 674			mask_irq(desc);
 675		if (!irqd_irq_disabled(&desc->irq_data))
 676			unmask = 1;
 677	}
 678
 679	/* Mask all flags except trigger mode */
 680	flags &= IRQ_TYPE_SENSE_MASK;
 681	ret = chip->irq_set_type(&desc->irq_data, flags);
 682
 683	switch (ret) {
 684	case IRQ_SET_MASK_OK:
 685	case IRQ_SET_MASK_OK_DONE:
 686		irqd_clear(&desc->irq_data, IRQD_TRIGGER_MASK);
 687		irqd_set(&desc->irq_data, flags);
 688
 689	case IRQ_SET_MASK_OK_NOCOPY:
 690		flags = irqd_get_trigger_type(&desc->irq_data);
 691		irq_settings_set_trigger_mask(desc, flags);
 692		irqd_clear(&desc->irq_data, IRQD_LEVEL);
 693		irq_settings_clr_level(desc);
 694		if (flags & IRQ_TYPE_LEVEL_MASK) {
 695			irq_settings_set_level(desc);
 696			irqd_set(&desc->irq_data, IRQD_LEVEL);
 697		}
 698
 699		ret = 0;
 700		break;
 701	default:
 702		pr_err("Setting trigger mode %lu for irq %u failed (%pF)\n",
 703		       flags, irq_desc_get_irq(desc), chip->irq_set_type);
 704	}
 705	if (unmask)
 706		unmask_irq(desc);
 707	return ret;
 708}
 709
 710#ifdef CONFIG_HARDIRQS_SW_RESEND
 711int irq_set_parent(int irq, int parent_irq)
 712{
 713	unsigned long flags;
 714	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, 0);
 715
 716	if (!desc)
 717		return -EINVAL;
 718
 719	desc->parent_irq = parent_irq;
 720
 721	irq_put_desc_unlock(desc, flags);
 722	return 0;
 723}
 724EXPORT_SYMBOL_GPL(irq_set_parent);
 725#endif
 726
 727/*
 728 * Default primary interrupt handler for threaded interrupts. Is
 729 * assigned as primary handler when request_threaded_irq is called
 730 * with handler == NULL. Useful for oneshot interrupts.
 731 */
 732static irqreturn_t irq_default_primary_handler(int irq, void *dev_id)
 733{
 734	return IRQ_WAKE_THREAD;
 735}
 736
 737/*
 738 * Primary handler for nested threaded interrupts. Should never be
 739 * called.
 740 */
 741static irqreturn_t irq_nested_primary_handler(int irq, void *dev_id)
 742{
 743	WARN(1, "Primary handler called for nested irq %d\n", irq);
 744	return IRQ_NONE;
 745}
 746
 747static irqreturn_t irq_forced_secondary_handler(int irq, void *dev_id)
 748{
 749	WARN(1, "Secondary action handler called for irq %d\n", irq);
 750	return IRQ_NONE;
 751}
 752
 753static int irq_wait_for_interrupt(struct irqaction *action)
 754{
 755	set_current_state(TASK_INTERRUPTIBLE);
 756
 757	while (!kthread_should_stop()) {
 758
 759		if (test_and_clear_bit(IRQTF_RUNTHREAD,
 760				       &action->thread_flags)) {
 761			__set_current_state(TASK_RUNNING);
 762			return 0;
 763		}
 764		schedule();
 765		set_current_state(TASK_INTERRUPTIBLE);
 766	}
 767	__set_current_state(TASK_RUNNING);
 768	return -1;
 769}
 770
 771/*
 772 * Oneshot interrupts keep the irq line masked until the threaded
 773 * handler finished. unmask if the interrupt has not been disabled and
 774 * is marked MASKED.
 775 */
 776static void irq_finalize_oneshot(struct irq_desc *desc,
 777				 struct irqaction *action)
 778{
 779	if (!(desc->istate & IRQS_ONESHOT) ||
 780	    action->handler == irq_forced_secondary_handler)
 781		return;
 782again:
 783	chip_bus_lock(desc);
 784	raw_spin_lock_irq(&desc->lock);
 785
 786	/*
 787	 * Implausible though it may be we need to protect us against
 788	 * the following scenario:
 789	 *
 790	 * The thread is faster done than the hard interrupt handler
 791	 * on the other CPU. If we unmask the irq line then the
 792	 * interrupt can come in again and masks the line, leaves due
 793	 * to IRQS_INPROGRESS and the irq line is masked forever.
 794	 *
 795	 * This also serializes the state of shared oneshot handlers
 796	 * versus "desc->threads_onehsot |= action->thread_mask;" in
 797	 * irq_wake_thread(). See the comment there which explains the
 798	 * serialization.
 799	 */
 800	if (unlikely(irqd_irq_inprogress(&desc->irq_data))) {
 801		raw_spin_unlock_irq(&desc->lock);
 802		chip_bus_sync_unlock(desc);
 803		cpu_relax();
 804		goto again;
 805	}
 806
 807	/*
 808	 * Now check again, whether the thread should run. Otherwise
 809	 * we would clear the threads_oneshot bit of this thread which
 810	 * was just set.
 811	 */
 812	if (test_bit(IRQTF_RUNTHREAD, &action->thread_flags))
 813		goto out_unlock;
 814
 815	desc->threads_oneshot &= ~action->thread_mask;
 816
 817	if (!desc->threads_oneshot && !irqd_irq_disabled(&desc->irq_data) &&
 818	    irqd_irq_masked(&desc->irq_data))
 819		unmask_threaded_irq(desc);
 820
 821out_unlock:
 822	raw_spin_unlock_irq(&desc->lock);
 823	chip_bus_sync_unlock(desc);
 824}
 825
 826#ifdef CONFIG_SMP
 827/*
 828 * Check whether we need to change the affinity of the interrupt thread.
 829 */
 830static void
 831irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action)
 832{
 833	cpumask_var_t mask;
 834	bool valid = true;
 835
 836	if (!test_and_clear_bit(IRQTF_AFFINITY, &action->thread_flags))
 837		return;
 838
 839	/*
 840	 * In case we are out of memory we set IRQTF_AFFINITY again and
 841	 * try again next time
 842	 */
 843	if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
 844		set_bit(IRQTF_AFFINITY, &action->thread_flags);
 845		return;
 846	}
 847
 848	raw_spin_lock_irq(&desc->lock);
 849	/*
 850	 * This code is triggered unconditionally. Check the affinity
 851	 * mask pointer. For CPU_MASK_OFFSTACK=n this is optimized out.
 852	 */
 853	if (desc->irq_common_data.affinity)
 854		cpumask_copy(mask, desc->irq_common_data.affinity);
 855	else
 
 
 
 856		valid = false;
 
 857	raw_spin_unlock_irq(&desc->lock);
 858
 859	if (valid)
 860		set_cpus_allowed_ptr(current, mask);
 861	free_cpumask_var(mask);
 862}
 863#else
 864static inline void
 865irq_thread_check_affinity(struct irq_desc *desc, struct irqaction *action) { }
 866#endif
 867
 868/*
 869 * Interrupts which are not explicitely requested as threaded
 870 * interrupts rely on the implicit bh/preempt disable of the hard irq
 871 * context. So we need to disable bh here to avoid deadlocks and other
 872 * side effects.
 873 */
 874static irqreturn_t
 875irq_forced_thread_fn(struct irq_desc *desc, struct irqaction *action)
 876{
 877	irqreturn_t ret;
 878
 879	local_bh_disable();
 880	ret = action->thread_fn(action->irq, action->dev_id);
 881	irq_finalize_oneshot(desc, action);
 882	local_bh_enable();
 883	return ret;
 884}
 885
 886/*
 887 * Interrupts explicitly requested as threaded interrupts want to be
 888 * preemtible - many of them need to sleep and wait for slow busses to
 889 * complete.
 890 */
 891static irqreturn_t irq_thread_fn(struct irq_desc *desc,
 892		struct irqaction *action)
 893{
 894	irqreturn_t ret;
 895
 896	ret = action->thread_fn(action->irq, action->dev_id);
 897	irq_finalize_oneshot(desc, action);
 898	return ret;
 899}
 900
 901static void wake_threads_waitq(struct irq_desc *desc)
 902{
 903	if (atomic_dec_and_test(&desc->threads_active))
 904		wake_up(&desc->wait_for_threads);
 905}
 906
 907static void irq_thread_dtor(struct callback_head *unused)
 908{
 909	struct task_struct *tsk = current;
 910	struct irq_desc *desc;
 911	struct irqaction *action;
 912
 913	if (WARN_ON_ONCE(!(current->flags & PF_EXITING)))
 914		return;
 915
 916	action = kthread_data(tsk);
 917
 918	pr_err("exiting task \"%s\" (%d) is an active IRQ thread (irq %d)\n",
 919	       tsk->comm, tsk->pid, action->irq);
 920
 921
 922	desc = irq_to_desc(action->irq);
 923	/*
 924	 * If IRQTF_RUNTHREAD is set, we need to decrement
 925	 * desc->threads_active and wake possible waiters.
 926	 */
 927	if (test_and_clear_bit(IRQTF_RUNTHREAD, &action->thread_flags))
 928		wake_threads_waitq(desc);
 929
 930	/* Prevent a stale desc->threads_oneshot */
 931	irq_finalize_oneshot(desc, action);
 932}
 933
 934static void irq_wake_secondary(struct irq_desc *desc, struct irqaction *action)
 935{
 936	struct irqaction *secondary = action->secondary;
 937
 938	if (WARN_ON_ONCE(!secondary))
 939		return;
 940
 941	raw_spin_lock_irq(&desc->lock);
 942	__irq_wake_thread(desc, secondary);
 943	raw_spin_unlock_irq(&desc->lock);
 944}
 945
 946/*
 947 * Interrupt handler thread
 948 */
 949static int irq_thread(void *data)
 950{
 951	struct callback_head on_exit_work;
 952	struct irqaction *action = data;
 953	struct irq_desc *desc = irq_to_desc(action->irq);
 954	irqreturn_t (*handler_fn)(struct irq_desc *desc,
 955			struct irqaction *action);
 956
 957	if (force_irqthreads && test_bit(IRQTF_FORCED_THREAD,
 958					&action->thread_flags))
 959		handler_fn = irq_forced_thread_fn;
 960	else
 961		handler_fn = irq_thread_fn;
 962
 963	init_task_work(&on_exit_work, irq_thread_dtor);
 964	task_work_add(current, &on_exit_work, false);
 965
 966	irq_thread_check_affinity(desc, action);
 967
 968	while (!irq_wait_for_interrupt(action)) {
 969		irqreturn_t action_ret;
 970
 971		irq_thread_check_affinity(desc, action);
 972
 973		action_ret = handler_fn(desc, action);
 974		if (action_ret == IRQ_HANDLED)
 975			atomic_inc(&desc->threads_handled);
 976		if (action_ret == IRQ_WAKE_THREAD)
 977			irq_wake_secondary(desc, action);
 978
 979		wake_threads_waitq(desc);
 980	}
 981
 982	/*
 983	 * This is the regular exit path. __free_irq() is stopping the
 984	 * thread via kthread_stop() after calling
 985	 * synchronize_irq(). So neither IRQTF_RUNTHREAD nor the
 986	 * oneshot mask bit can be set. We cannot verify that as we
 987	 * cannot touch the oneshot mask at this point anymore as
 988	 * __setup_irq() might have given out currents thread_mask
 989	 * again.
 990	 */
 991	task_work_cancel(current, irq_thread_dtor);
 992	return 0;
 993}
 994
 995/**
 996 *	irq_wake_thread - wake the irq thread for the action identified by dev_id
 997 *	@irq:		Interrupt line
 998 *	@dev_id:	Device identity for which the thread should be woken
 999 *
1000 */
1001void irq_wake_thread(unsigned int irq, void *dev_id)
1002{
1003	struct irq_desc *desc = irq_to_desc(irq);
1004	struct irqaction *action;
1005	unsigned long flags;
1006
1007	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1008		return;
1009
1010	raw_spin_lock_irqsave(&desc->lock, flags);
1011	for_each_action_of_desc(desc, action) {
1012		if (action->dev_id == dev_id) {
1013			if (action->thread)
1014				__irq_wake_thread(desc, action);
1015			break;
1016		}
1017	}
1018	raw_spin_unlock_irqrestore(&desc->lock, flags);
1019}
1020EXPORT_SYMBOL_GPL(irq_wake_thread);
1021
1022static int irq_setup_forced_threading(struct irqaction *new)
1023{
1024	if (!force_irqthreads)
1025		return 0;
1026	if (new->flags & (IRQF_NO_THREAD | IRQF_PERCPU | IRQF_ONESHOT))
1027		return 0;
1028
1029	new->flags |= IRQF_ONESHOT;
1030
1031	/*
1032	 * Handle the case where we have a real primary handler and a
1033	 * thread handler. We force thread them as well by creating a
1034	 * secondary action.
1035	 */
1036	if (new->handler != irq_default_primary_handler && new->thread_fn) {
1037		/* Allocate the secondary action */
1038		new->secondary = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1039		if (!new->secondary)
1040			return -ENOMEM;
1041		new->secondary->handler = irq_forced_secondary_handler;
1042		new->secondary->thread_fn = new->thread_fn;
1043		new->secondary->dev_id = new->dev_id;
1044		new->secondary->irq = new->irq;
1045		new->secondary->name = new->name;
1046	}
1047	/* Deal with the primary handler */
1048	set_bit(IRQTF_FORCED_THREAD, &new->thread_flags);
1049	new->thread_fn = new->handler;
1050	new->handler = irq_default_primary_handler;
1051	return 0;
1052}
1053
1054static int irq_request_resources(struct irq_desc *desc)
1055{
1056	struct irq_data *d = &desc->irq_data;
1057	struct irq_chip *c = d->chip;
1058
1059	return c->irq_request_resources ? c->irq_request_resources(d) : 0;
1060}
1061
1062static void irq_release_resources(struct irq_desc *desc)
1063{
1064	struct irq_data *d = &desc->irq_data;
1065	struct irq_chip *c = d->chip;
1066
1067	if (c->irq_release_resources)
1068		c->irq_release_resources(d);
1069}
1070
1071static int
1072setup_irq_thread(struct irqaction *new, unsigned int irq, bool secondary)
1073{
1074	struct task_struct *t;
1075	struct sched_param param = {
1076		.sched_priority = MAX_USER_RT_PRIO/2,
1077	};
1078
1079	if (!secondary) {
1080		t = kthread_create(irq_thread, new, "irq/%d-%s", irq,
1081				   new->name);
1082	} else {
1083		t = kthread_create(irq_thread, new, "irq/%d-s-%s", irq,
1084				   new->name);
1085		param.sched_priority -= 1;
1086	}
1087
1088	if (IS_ERR(t))
1089		return PTR_ERR(t);
1090
1091	sched_setscheduler_nocheck(t, SCHED_FIFO, &param);
1092
1093	/*
1094	 * We keep the reference to the task struct even if
1095	 * the thread dies to avoid that the interrupt code
1096	 * references an already freed task_struct.
1097	 */
1098	get_task_struct(t);
1099	new->thread = t;
1100	/*
1101	 * Tell the thread to set its affinity. This is
1102	 * important for shared interrupt handlers as we do
1103	 * not invoke setup_affinity() for the secondary
1104	 * handlers as everything is already set up. Even for
1105	 * interrupts marked with IRQF_NO_BALANCE this is
1106	 * correct as we want the thread to move to the cpu(s)
1107	 * on which the requesting code placed the interrupt.
1108	 */
1109	set_bit(IRQTF_AFFINITY, &new->thread_flags);
1110	return 0;
1111}
1112
1113/*
1114 * Internal function to register an irqaction - typically used to
1115 * allocate special interrupts that are part of the architecture.
 
 
 
 
 
 
 
 
 
 
1116 */
1117static int
1118__setup_irq(unsigned int irq, struct irq_desc *desc, struct irqaction *new)
1119{
1120	struct irqaction *old, **old_ptr;
1121	unsigned long flags, thread_mask = 0;
1122	int ret, nested, shared = 0;
1123	cpumask_var_t mask;
1124
1125	if (!desc)
1126		return -EINVAL;
1127
1128	if (desc->irq_data.chip == &no_irq_chip)
1129		return -ENOSYS;
1130	if (!try_module_get(desc->owner))
1131		return -ENODEV;
1132
1133	new->irq = irq;
1134
1135	/*
1136	 * If the trigger type is not specified by the caller,
1137	 * then use the default for this interrupt.
1138	 */
1139	if (!(new->flags & IRQF_TRIGGER_MASK))
1140		new->flags |= irqd_get_trigger_type(&desc->irq_data);
1141
1142	/*
1143	 * Check whether the interrupt nests into another interrupt
1144	 * thread.
1145	 */
1146	nested = irq_settings_is_nested_thread(desc);
1147	if (nested) {
1148		if (!new->thread_fn) {
1149			ret = -EINVAL;
1150			goto out_mput;
1151		}
1152		/*
1153		 * Replace the primary handler which was provided from
1154		 * the driver for non nested interrupt handling by the
1155		 * dummy function which warns when called.
1156		 */
1157		new->handler = irq_nested_primary_handler;
1158	} else {
1159		if (irq_settings_can_thread(desc)) {
1160			ret = irq_setup_forced_threading(new);
1161			if (ret)
1162				goto out_mput;
1163		}
1164	}
1165
1166	/*
1167	 * Create a handler thread when a thread function is supplied
1168	 * and the interrupt does not nest into another interrupt
1169	 * thread.
1170	 */
1171	if (new->thread_fn && !nested) {
1172		ret = setup_irq_thread(new, irq, false);
1173		if (ret)
1174			goto out_mput;
1175		if (new->secondary) {
1176			ret = setup_irq_thread(new->secondary, irq, true);
1177			if (ret)
1178				goto out_thread;
1179		}
1180	}
1181
1182	if (!alloc_cpumask_var(&mask, GFP_KERNEL)) {
1183		ret = -ENOMEM;
1184		goto out_thread;
1185	}
1186
1187	/*
1188	 * Drivers are often written to work w/o knowledge about the
1189	 * underlying irq chip implementation, so a request for a
1190	 * threaded irq without a primary hard irq context handler
1191	 * requires the ONESHOT flag to be set. Some irq chips like
1192	 * MSI based interrupts are per se one shot safe. Check the
1193	 * chip flags, so we can avoid the unmask dance at the end of
1194	 * the threaded handler for those.
1195	 */
1196	if (desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)
1197		new->flags &= ~IRQF_ONESHOT;
1198
1199	/*
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1200	 * The following block of code has to be executed atomically
 
 
 
1201	 */
1202	raw_spin_lock_irqsave(&desc->lock, flags);
1203	old_ptr = &desc->action;
1204	old = *old_ptr;
1205	if (old) {
1206		/*
1207		 * Can't share interrupts unless both agree to and are
1208		 * the same type (level, edge, polarity). So both flag
1209		 * fields must have IRQF_SHARED set and the bits which
1210		 * set the trigger type must match. Also all must
1211		 * agree on ONESHOT.
1212		 */
 
 
 
 
 
 
 
 
 
 
 
 
 
1213		if (!((old->flags & new->flags) & IRQF_SHARED) ||
1214		    ((old->flags ^ new->flags) & IRQF_TRIGGER_MASK) ||
1215		    ((old->flags ^ new->flags) & IRQF_ONESHOT))
1216			goto mismatch;
1217
1218		/* All handlers must agree on per-cpuness */
1219		if ((old->flags & IRQF_PERCPU) !=
1220		    (new->flags & IRQF_PERCPU))
1221			goto mismatch;
1222
1223		/* add new interrupt at end of irq queue */
1224		do {
1225			/*
1226			 * Or all existing action->thread_mask bits,
1227			 * so we can find the next zero bit for this
1228			 * new action.
1229			 */
1230			thread_mask |= old->thread_mask;
1231			old_ptr = &old->next;
1232			old = *old_ptr;
1233		} while (old);
1234		shared = 1;
1235	}
1236
1237	/*
1238	 * Setup the thread mask for this irqaction for ONESHOT. For
1239	 * !ONESHOT irqs the thread mask is 0 so we can avoid a
1240	 * conditional in irq_wake_thread().
1241	 */
1242	if (new->flags & IRQF_ONESHOT) {
1243		/*
1244		 * Unlikely to have 32 resp 64 irqs sharing one line,
1245		 * but who knows.
1246		 */
1247		if (thread_mask == ~0UL) {
1248			ret = -EBUSY;
1249			goto out_mask;
1250		}
1251		/*
1252		 * The thread_mask for the action is or'ed to
1253		 * desc->thread_active to indicate that the
1254		 * IRQF_ONESHOT thread handler has been woken, but not
1255		 * yet finished. The bit is cleared when a thread
1256		 * completes. When all threads of a shared interrupt
1257		 * line have completed desc->threads_active becomes
1258		 * zero and the interrupt line is unmasked. See
1259		 * handle.c:irq_wake_thread() for further information.
1260		 *
1261		 * If no thread is woken by primary (hard irq context)
1262		 * interrupt handlers, then desc->threads_active is
1263		 * also checked for zero to unmask the irq line in the
1264		 * affected hard irq flow handlers
1265		 * (handle_[fasteoi|level]_irq).
1266		 *
1267		 * The new action gets the first zero bit of
1268		 * thread_mask assigned. See the loop above which or's
1269		 * all existing action->thread_mask bits.
1270		 */
1271		new->thread_mask = 1 << ffz(thread_mask);
1272
1273	} else if (new->handler == irq_default_primary_handler &&
1274		   !(desc->irq_data.chip->flags & IRQCHIP_ONESHOT_SAFE)) {
1275		/*
1276		 * The interrupt was requested with handler = NULL, so
1277		 * we use the default primary handler for it. But it
1278		 * does not have the oneshot flag set. In combination
1279		 * with level interrupts this is deadly, because the
1280		 * default primary handler just wakes the thread, then
1281		 * the irq lines is reenabled, but the device still
1282		 * has the level irq asserted. Rinse and repeat....
1283		 *
1284		 * While this works for edge type interrupts, we play
1285		 * it safe and reject unconditionally because we can't
1286		 * say for sure which type this interrupt really
1287		 * has. The type flags are unreliable as the
1288		 * underlying chip implementation can override them.
1289		 */
1290		pr_err("Threaded irq requested with handler=NULL and !ONESHOT for irq %d\n",
1291		       irq);
1292		ret = -EINVAL;
1293		goto out_mask;
1294	}
1295
1296	if (!shared) {
1297		ret = irq_request_resources(desc);
1298		if (ret) {
1299			pr_err("Failed to request resources for %s (irq %d) on irqchip %s\n",
1300			       new->name, irq, desc->irq_data.chip->name);
1301			goto out_mask;
1302		}
1303
1304		init_waitqueue_head(&desc->wait_for_threads);
1305
1306		/* Setup the type (level, edge polarity) if configured: */
1307		if (new->flags & IRQF_TRIGGER_MASK) {
1308			ret = __irq_set_trigger(desc,
1309						new->flags & IRQF_TRIGGER_MASK);
1310
1311			if (ret)
1312				goto out_mask;
1313		}
1314
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1315		desc->istate &= ~(IRQS_AUTODETECT | IRQS_SPURIOUS_DISABLED | \
1316				  IRQS_ONESHOT | IRQS_WAITING);
1317		irqd_clear(&desc->irq_data, IRQD_IRQ_INPROGRESS);
1318
1319		if (new->flags & IRQF_PERCPU) {
1320			irqd_set(&desc->irq_data, IRQD_PER_CPU);
1321			irq_settings_set_per_cpu(desc);
1322		}
1323
1324		if (new->flags & IRQF_ONESHOT)
1325			desc->istate |= IRQS_ONESHOT;
1326
1327		if (irq_settings_can_autoenable(desc))
1328			irq_startup(desc, true);
1329		else
1330			/* Undo nested disables: */
1331			desc->depth = 1;
1332
1333		/* Exclude IRQ from balancing if requested */
1334		if (new->flags & IRQF_NOBALANCING) {
1335			irq_settings_set_no_balancing(desc);
1336			irqd_set(&desc->irq_data, IRQD_NO_BALANCING);
1337		}
1338
1339		/* Set default affinity mask once everything is setup */
1340		setup_affinity(desc, mask);
 
 
 
 
 
 
 
 
 
 
 
1341
1342	} else if (new->flags & IRQF_TRIGGER_MASK) {
1343		unsigned int nmsk = new->flags & IRQF_TRIGGER_MASK;
1344		unsigned int omsk = irqd_get_trigger_type(&desc->irq_data);
1345
1346		if (nmsk != omsk)
1347			/* hope the handler works with current  trigger mode */
1348			pr_warn("irq %d uses trigger mode %u; requested %u\n",
1349				irq, omsk, nmsk);
1350	}
1351
1352	*old_ptr = new;
1353
1354	irq_pm_install_action(desc, new);
1355
1356	/* Reset broken irq detection when installing new handler */
1357	desc->irq_count = 0;
1358	desc->irqs_unhandled = 0;
1359
1360	/*
1361	 * Check whether we disabled the irq via the spurious handler
1362	 * before. Reenable it and give it another chance.
1363	 */
1364	if (shared && (desc->istate & IRQS_SPURIOUS_DISABLED)) {
1365		desc->istate &= ~IRQS_SPURIOUS_DISABLED;
1366		__enable_irq(desc);
1367	}
1368
1369	raw_spin_unlock_irqrestore(&desc->lock, flags);
 
 
 
 
1370
1371	/*
1372	 * Strictly no need to wake it up, but hung_task complains
1373	 * when no hard interrupt wakes the thread up.
1374	 */
1375	if (new->thread)
1376		wake_up_process(new->thread);
1377	if (new->secondary)
1378		wake_up_process(new->secondary->thread);
1379
1380	register_irq_proc(irq, desc);
1381	new->dir = NULL;
1382	register_handler_proc(irq, new);
1383	free_cpumask_var(mask);
1384
1385	return 0;
1386
1387mismatch:
1388	if (!(new->flags & IRQF_PROBE_SHARED)) {
1389		pr_err("Flags mismatch irq %d. %08x (%s) vs. %08x (%s)\n",
1390		       irq, new->flags, new->name, old->flags, old->name);
1391#ifdef CONFIG_DEBUG_SHIRQ
1392		dump_stack();
1393#endif
1394	}
1395	ret = -EBUSY;
1396
1397out_mask:
1398	raw_spin_unlock_irqrestore(&desc->lock, flags);
1399	free_cpumask_var(mask);
 
 
 
 
 
1400
1401out_thread:
1402	if (new->thread) {
1403		struct task_struct *t = new->thread;
1404
1405		new->thread = NULL;
1406		kthread_stop(t);
1407		put_task_struct(t);
1408	}
1409	if (new->secondary && new->secondary->thread) {
1410		struct task_struct *t = new->secondary->thread;
1411
1412		new->secondary->thread = NULL;
1413		kthread_stop(t);
1414		put_task_struct(t);
1415	}
1416out_mput:
1417	module_put(desc->owner);
1418	return ret;
1419}
1420
1421/**
1422 *	setup_irq - setup an interrupt
1423 *	@irq: Interrupt line to setup
1424 *	@act: irqaction for the interrupt
1425 *
1426 * Used to statically setup interrupts in the early boot process.
1427 */
1428int setup_irq(unsigned int irq, struct irqaction *act)
1429{
1430	int retval;
1431	struct irq_desc *desc = irq_to_desc(irq);
1432
1433	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1434		return -EINVAL;
1435
1436	retval = irq_chip_pm_get(&desc->irq_data);
1437	if (retval < 0)
1438		return retval;
1439
1440	chip_bus_lock(desc);
1441	retval = __setup_irq(irq, desc, act);
1442	chip_bus_sync_unlock(desc);
1443
1444	if (retval)
1445		irq_chip_pm_put(&desc->irq_data);
1446
1447	return retval;
1448}
1449EXPORT_SYMBOL_GPL(setup_irq);
1450
1451/*
1452 * Internal function to unregister an irqaction - used to free
1453 * regular and special interrupts that are part of the architecture.
1454 */
1455static struct irqaction *__free_irq(unsigned int irq, void *dev_id)
1456{
1457	struct irq_desc *desc = irq_to_desc(irq);
1458	struct irqaction *action, **action_ptr;
1459	unsigned long flags;
1460
1461	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1462
1463	if (!desc)
1464		return NULL;
1465
 
1466	chip_bus_lock(desc);
1467	raw_spin_lock_irqsave(&desc->lock, flags);
1468
1469	/*
1470	 * There can be multiple actions per IRQ descriptor, find the right
1471	 * one based on the dev_id:
1472	 */
1473	action_ptr = &desc->action;
1474	for (;;) {
1475		action = *action_ptr;
1476
1477		if (!action) {
1478			WARN(1, "Trying to free already-free IRQ %d\n", irq);
1479			raw_spin_unlock_irqrestore(&desc->lock, flags);
1480			chip_bus_sync_unlock(desc);
 
1481			return NULL;
1482		}
1483
1484		if (action->dev_id == dev_id)
1485			break;
1486		action_ptr = &action->next;
1487	}
1488
1489	/* Found it - now remove it from the list of entries: */
1490	*action_ptr = action->next;
1491
1492	irq_pm_remove_action(desc, action);
1493
1494	/* If this was the last handler, shut down the IRQ line: */
1495	if (!desc->action) {
1496		irq_settings_clr_disable_unlazy(desc);
1497		irq_shutdown(desc);
1498		irq_release_resources(desc);
1499	}
1500
1501#ifdef CONFIG_SMP
1502	/* make sure affinity_hint is cleaned up */
1503	if (WARN_ON_ONCE(desc->affinity_hint))
1504		desc->affinity_hint = NULL;
1505#endif
1506
1507	raw_spin_unlock_irqrestore(&desc->lock, flags);
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1508	chip_bus_sync_unlock(desc);
1509
1510	unregister_handler_proc(irq, action);
1511
1512	/* Make sure it's not being used on another CPU: */
1513	synchronize_irq(irq);
1514
1515#ifdef CONFIG_DEBUG_SHIRQ
1516	/*
1517	 * It's a shared IRQ -- the driver ought to be prepared for an IRQ
1518	 * event to happen even now it's being freed, so let's make sure that
1519	 * is so by doing an extra call to the handler ....
1520	 *
1521	 * ( We do this after actually deregistering it, to make sure that a
1522	 *   'real' IRQ doesn't run in * parallel with our fake. )
1523	 */
1524	if (action->flags & IRQF_SHARED) {
1525		local_irq_save(flags);
1526		action->handler(irq, dev_id);
1527		local_irq_restore(flags);
1528	}
1529#endif
1530
1531	if (action->thread) {
1532		kthread_stop(action->thread);
1533		put_task_struct(action->thread);
1534		if (action->secondary && action->secondary->thread) {
1535			kthread_stop(action->secondary->thread);
1536			put_task_struct(action->secondary->thread);
1537		}
1538	}
1539
 
 
 
 
 
 
 
 
 
 
 
 
 
 
1540	irq_chip_pm_put(&desc->irq_data);
1541	module_put(desc->owner);
1542	kfree(action->secondary);
1543	return action;
1544}
1545
1546/**
1547 *	remove_irq - free an interrupt
1548 *	@irq: Interrupt line to free
1549 *	@act: irqaction for the interrupt
1550 *
1551 * Used to remove interrupts statically setup by the early boot process.
1552 */
1553void remove_irq(unsigned int irq, struct irqaction *act)
1554{
1555	struct irq_desc *desc = irq_to_desc(irq);
1556
1557	if (desc && !WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1558	    __free_irq(irq, act->dev_id);
1559}
1560EXPORT_SYMBOL_GPL(remove_irq);
1561
1562/**
1563 *	free_irq - free an interrupt allocated with request_irq
1564 *	@irq: Interrupt line to free
1565 *	@dev_id: Device identity to free
1566 *
1567 *	Remove an interrupt handler. The handler is removed and if the
1568 *	interrupt line is no longer in use by any driver it is disabled.
1569 *	On a shared IRQ the caller must ensure the interrupt is disabled
1570 *	on the card it drives before calling this function. The function
1571 *	does not return until any executing interrupts for this IRQ
1572 *	have completed.
1573 *
1574 *	This function must not be called from interrupt context.
 
 
1575 */
1576void free_irq(unsigned int irq, void *dev_id)
1577{
1578	struct irq_desc *desc = irq_to_desc(irq);
 
 
1579
1580	if (!desc || WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1581		return;
1582
1583#ifdef CONFIG_SMP
1584	if (WARN_ON(desc->affinity_notify))
1585		desc->affinity_notify = NULL;
1586#endif
1587
1588	kfree(__free_irq(irq, dev_id));
 
 
 
 
 
 
 
1589}
1590EXPORT_SYMBOL(free_irq);
1591
1592/**
1593 *	request_threaded_irq - allocate an interrupt line
1594 *	@irq: Interrupt line to allocate
1595 *	@handler: Function to be called when the IRQ occurs.
1596 *		  Primary handler for threaded interrupts
1597 *		  If NULL and thread_fn != NULL the default
1598 *		  primary handler is installed
1599 *	@thread_fn: Function called from the irq handler thread
1600 *		    If NULL, no irq thread is created
1601 *	@irqflags: Interrupt type flags
1602 *	@devname: An ascii name for the claiming device
1603 *	@dev_id: A cookie passed back to the handler function
1604 *
1605 *	This call allocates interrupt resources and enables the
1606 *	interrupt line and IRQ handling. From the point this
1607 *	call is made your handler function may be invoked. Since
1608 *	your handler function must clear any interrupt the board
1609 *	raises, you must take care both to initialise your hardware
1610 *	and to set up the interrupt handler in the right order.
1611 *
1612 *	If you want to set up a threaded irq handler for your device
1613 *	then you need to supply @handler and @thread_fn. @handler is
1614 *	still called in hard interrupt context and has to check
1615 *	whether the interrupt originates from the device. If yes it
1616 *	needs to disable the interrupt on the device and return
1617 *	IRQ_WAKE_THREAD which will wake up the handler thread and run
1618 *	@thread_fn. This split handler design is necessary to support
1619 *	shared interrupts.
1620 *
1621 *	Dev_id must be globally unique. Normally the address of the
1622 *	device data structure is used as the cookie. Since the handler
1623 *	receives this value it makes sense to use it.
1624 *
1625 *	If your interrupt is shared you must pass a non NULL dev_id
1626 *	as this is required when freeing the interrupt.
1627 *
1628 *	Flags:
1629 *
1630 *	IRQF_SHARED		Interrupt is shared
1631 *	IRQF_TRIGGER_*		Specify active edge(s) or level
1632 *
1633 */
1634int request_threaded_irq(unsigned int irq, irq_handler_t handler,
1635			 irq_handler_t thread_fn, unsigned long irqflags,
1636			 const char *devname, void *dev_id)
1637{
1638	struct irqaction *action;
1639	struct irq_desc *desc;
1640	int retval;
1641
1642	if (irq == IRQ_NOTCONNECTED)
1643		return -ENOTCONN;
1644
1645	/*
1646	 * Sanity-check: shared interrupts must pass in a real dev-ID,
1647	 * otherwise we'll have trouble later trying to figure out
1648	 * which interrupt is which (messes up the interrupt freeing
1649	 * logic etc).
1650	 *
1651	 * Also IRQF_COND_SUSPEND only makes sense for shared interrupts and
1652	 * it cannot be set along with IRQF_NO_SUSPEND.
1653	 */
1654	if (((irqflags & IRQF_SHARED) && !dev_id) ||
1655	    (!(irqflags & IRQF_SHARED) && (irqflags & IRQF_COND_SUSPEND)) ||
1656	    ((irqflags & IRQF_NO_SUSPEND) && (irqflags & IRQF_COND_SUSPEND)))
1657		return -EINVAL;
1658
1659	desc = irq_to_desc(irq);
1660	if (!desc)
1661		return -EINVAL;
1662
1663	if (!irq_settings_can_request(desc) ||
1664	    WARN_ON(irq_settings_is_per_cpu_devid(desc)))
1665		return -EINVAL;
1666
1667	if (!handler) {
1668		if (!thread_fn)
1669			return -EINVAL;
1670		handler = irq_default_primary_handler;
1671	}
1672
1673	action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1674	if (!action)
1675		return -ENOMEM;
1676
1677	action->handler = handler;
1678	action->thread_fn = thread_fn;
1679	action->flags = irqflags;
1680	action->name = devname;
1681	action->dev_id = dev_id;
1682
1683	retval = irq_chip_pm_get(&desc->irq_data);
1684	if (retval < 0) {
1685		kfree(action);
1686		return retval;
1687	}
1688
1689	chip_bus_lock(desc);
1690	retval = __setup_irq(irq, desc, action);
1691	chip_bus_sync_unlock(desc);
1692
1693	if (retval) {
1694		irq_chip_pm_put(&desc->irq_data);
1695		kfree(action->secondary);
1696		kfree(action);
1697	}
1698
1699#ifdef CONFIG_DEBUG_SHIRQ_FIXME
1700	if (!retval && (irqflags & IRQF_SHARED)) {
1701		/*
1702		 * It's a shared IRQ -- the driver ought to be prepared for it
1703		 * to happen immediately, so let's make sure....
1704		 * We disable the irq to make sure that a 'real' IRQ doesn't
1705		 * run in parallel with our fake.
1706		 */
1707		unsigned long flags;
1708
1709		disable_irq(irq);
1710		local_irq_save(flags);
1711
1712		handler(irq, dev_id);
1713
1714		local_irq_restore(flags);
1715		enable_irq(irq);
1716	}
1717#endif
1718	return retval;
1719}
1720EXPORT_SYMBOL(request_threaded_irq);
1721
1722/**
1723 *	request_any_context_irq - allocate an interrupt line
1724 *	@irq: Interrupt line to allocate
1725 *	@handler: Function to be called when the IRQ occurs.
1726 *		  Threaded handler for threaded interrupts.
1727 *	@flags: Interrupt type flags
1728 *	@name: An ascii name for the claiming device
1729 *	@dev_id: A cookie passed back to the handler function
1730 *
1731 *	This call allocates interrupt resources and enables the
1732 *	interrupt line and IRQ handling. It selects either a
1733 *	hardirq or threaded handling method depending on the
1734 *	context.
1735 *
1736 *	On failure, it returns a negative value. On success,
1737 *	it returns either IRQC_IS_HARDIRQ or IRQC_IS_NESTED.
1738 */
1739int request_any_context_irq(unsigned int irq, irq_handler_t handler,
1740			    unsigned long flags, const char *name, void *dev_id)
1741{
1742	struct irq_desc *desc;
1743	int ret;
1744
1745	if (irq == IRQ_NOTCONNECTED)
1746		return -ENOTCONN;
1747
1748	desc = irq_to_desc(irq);
1749	if (!desc)
1750		return -EINVAL;
1751
1752	if (irq_settings_is_nested_thread(desc)) {
1753		ret = request_threaded_irq(irq, NULL, handler,
1754					   flags, name, dev_id);
1755		return !ret ? IRQC_IS_NESTED : ret;
1756	}
1757
1758	ret = request_irq(irq, handler, flags, name, dev_id);
1759	return !ret ? IRQC_IS_HARDIRQ : ret;
1760}
1761EXPORT_SYMBOL_GPL(request_any_context_irq);
1762
1763void enable_percpu_irq(unsigned int irq, unsigned int type)
1764{
1765	unsigned int cpu = smp_processor_id();
1766	unsigned long flags;
1767	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1768
1769	if (!desc)
1770		return;
1771
1772	/*
1773	 * If the trigger type is not specified by the caller, then
1774	 * use the default for this interrupt.
1775	 */
1776	type &= IRQ_TYPE_SENSE_MASK;
1777	if (type == IRQ_TYPE_NONE)
1778		type = irqd_get_trigger_type(&desc->irq_data);
1779
1780	if (type != IRQ_TYPE_NONE) {
1781		int ret;
1782
1783		ret = __irq_set_trigger(desc, type);
1784
1785		if (ret) {
1786			WARN(1, "failed to set type for IRQ%d\n", irq);
1787			goto out;
1788		}
1789	}
1790
1791	irq_percpu_enable(desc, cpu);
1792out:
1793	irq_put_desc_unlock(desc, flags);
1794}
1795EXPORT_SYMBOL_GPL(enable_percpu_irq);
1796
1797/**
1798 * irq_percpu_is_enabled - Check whether the per cpu irq is enabled
1799 * @irq:	Linux irq number to check for
1800 *
1801 * Must be called from a non migratable context. Returns the enable
1802 * state of a per cpu interrupt on the current cpu.
1803 */
1804bool irq_percpu_is_enabled(unsigned int irq)
1805{
1806	unsigned int cpu = smp_processor_id();
1807	struct irq_desc *desc;
1808	unsigned long flags;
1809	bool is_enabled;
1810
1811	desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1812	if (!desc)
1813		return false;
1814
1815	is_enabled = cpumask_test_cpu(cpu, desc->percpu_enabled);
1816	irq_put_desc_unlock(desc, flags);
1817
1818	return is_enabled;
1819}
1820EXPORT_SYMBOL_GPL(irq_percpu_is_enabled);
1821
1822void disable_percpu_irq(unsigned int irq)
1823{
1824	unsigned int cpu = smp_processor_id();
1825	unsigned long flags;
1826	struct irq_desc *desc = irq_get_desc_lock(irq, &flags, IRQ_GET_DESC_CHECK_PERCPU);
1827
1828	if (!desc)
1829		return;
1830
1831	irq_percpu_disable(desc, cpu);
1832	irq_put_desc_unlock(desc, flags);
1833}
1834EXPORT_SYMBOL_GPL(disable_percpu_irq);
1835
1836/*
1837 * Internal function to unregister a percpu irqaction.
1838 */
1839static struct irqaction *__free_percpu_irq(unsigned int irq, void __percpu *dev_id)
1840{
1841	struct irq_desc *desc = irq_to_desc(irq);
1842	struct irqaction *action;
1843	unsigned long flags;
1844
1845	WARN(in_interrupt(), "Trying to free IRQ %d from IRQ context!\n", irq);
1846
1847	if (!desc)
1848		return NULL;
1849
1850	raw_spin_lock_irqsave(&desc->lock, flags);
1851
1852	action = desc->action;
1853	if (!action || action->percpu_dev_id != dev_id) {
1854		WARN(1, "Trying to free already-free IRQ %d\n", irq);
1855		goto bad;
1856	}
1857
1858	if (!cpumask_empty(desc->percpu_enabled)) {
1859		WARN(1, "percpu IRQ %d still enabled on CPU%d!\n",
1860		     irq, cpumask_first(desc->percpu_enabled));
1861		goto bad;
1862	}
1863
1864	/* Found it - now remove it from the list of entries: */
1865	desc->action = NULL;
1866
1867	raw_spin_unlock_irqrestore(&desc->lock, flags);
1868
1869	unregister_handler_proc(irq, action);
1870
1871	irq_chip_pm_put(&desc->irq_data);
1872	module_put(desc->owner);
1873	return action;
1874
1875bad:
1876	raw_spin_unlock_irqrestore(&desc->lock, flags);
1877	return NULL;
1878}
1879
1880/**
1881 *	remove_percpu_irq - free a per-cpu interrupt
1882 *	@irq: Interrupt line to free
1883 *	@act: irqaction for the interrupt
1884 *
1885 * Used to remove interrupts statically setup by the early boot process.
1886 */
1887void remove_percpu_irq(unsigned int irq, struct irqaction *act)
1888{
1889	struct irq_desc *desc = irq_to_desc(irq);
1890
1891	if (desc && irq_settings_is_per_cpu_devid(desc))
1892	    __free_percpu_irq(irq, act->percpu_dev_id);
1893}
1894
1895/**
1896 *	free_percpu_irq - free an interrupt allocated with request_percpu_irq
1897 *	@irq: Interrupt line to free
1898 *	@dev_id: Device identity to free
1899 *
1900 *	Remove a percpu interrupt handler. The handler is removed, but
1901 *	the interrupt line is not disabled. This must be done on each
1902 *	CPU before calling this function. The function does not return
1903 *	until any executing interrupts for this IRQ have completed.
1904 *
1905 *	This function must not be called from interrupt context.
1906 */
1907void free_percpu_irq(unsigned int irq, void __percpu *dev_id)
1908{
1909	struct irq_desc *desc = irq_to_desc(irq);
1910
1911	if (!desc || !irq_settings_is_per_cpu_devid(desc))
1912		return;
1913
1914	chip_bus_lock(desc);
1915	kfree(__free_percpu_irq(irq, dev_id));
1916	chip_bus_sync_unlock(desc);
1917}
1918EXPORT_SYMBOL_GPL(free_percpu_irq);
1919
1920/**
1921 *	setup_percpu_irq - setup a per-cpu interrupt
1922 *	@irq: Interrupt line to setup
1923 *	@act: irqaction for the interrupt
1924 *
1925 * Used to statically setup per-cpu interrupts in the early boot process.
1926 */
1927int setup_percpu_irq(unsigned int irq, struct irqaction *act)
1928{
1929	struct irq_desc *desc = irq_to_desc(irq);
1930	int retval;
1931
1932	if (!desc || !irq_settings_is_per_cpu_devid(desc))
1933		return -EINVAL;
1934
1935	retval = irq_chip_pm_get(&desc->irq_data);
1936	if (retval < 0)
1937		return retval;
1938
1939	chip_bus_lock(desc);
1940	retval = __setup_irq(irq, desc, act);
1941	chip_bus_sync_unlock(desc);
1942
1943	if (retval)
1944		irq_chip_pm_put(&desc->irq_data);
1945
1946	return retval;
1947}
1948
1949/**
1950 *	request_percpu_irq - allocate a percpu interrupt line
1951 *	@irq: Interrupt line to allocate
1952 *	@handler: Function to be called when the IRQ occurs.
 
1953 *	@devname: An ascii name for the claiming device
1954 *	@dev_id: A percpu cookie passed back to the handler function
1955 *
1956 *	This call allocates interrupt resources and enables the
1957 *	interrupt on the local CPU. If the interrupt is supposed to be
1958 *	enabled on other CPUs, it has to be done on each CPU using
1959 *	enable_percpu_irq().
1960 *
1961 *	Dev_id must be globally unique. It is a per-cpu variable, and
1962 *	the handler gets called with the interrupted CPU's instance of
1963 *	that variable.
1964 */
1965int request_percpu_irq(unsigned int irq, irq_handler_t handler,
1966		       const char *devname, void __percpu *dev_id)
 
1967{
1968	struct irqaction *action;
1969	struct irq_desc *desc;
1970	int retval;
1971
1972	if (!dev_id)
1973		return -EINVAL;
1974
1975	desc = irq_to_desc(irq);
1976	if (!desc || !irq_settings_can_request(desc) ||
1977	    !irq_settings_is_per_cpu_devid(desc))
1978		return -EINVAL;
1979
 
 
 
1980	action = kzalloc(sizeof(struct irqaction), GFP_KERNEL);
1981	if (!action)
1982		return -ENOMEM;
1983
1984	action->handler = handler;
1985	action->flags = IRQF_PERCPU | IRQF_NO_SUSPEND;
1986	action->name = devname;
1987	action->percpu_dev_id = dev_id;
1988
1989	retval = irq_chip_pm_get(&desc->irq_data);
1990	if (retval < 0) {
1991		kfree(action);
1992		return retval;
1993	}
1994
1995	chip_bus_lock(desc);
1996	retval = __setup_irq(irq, desc, action);
1997	chip_bus_sync_unlock(desc);
1998
1999	if (retval) {
2000		irq_chip_pm_put(&desc->irq_data);
2001		kfree(action);
2002	}
2003
2004	return retval;
2005}
2006EXPORT_SYMBOL_GPL(request_percpu_irq);
2007
2008/**
2009 *	irq_get_irqchip_state - returns the irqchip state of a interrupt.
2010 *	@irq: Interrupt line that is forwarded to a VM
2011 *	@which: One of IRQCHIP_STATE_* the caller wants to know about
2012 *	@state: a pointer to a boolean where the state is to be storeed
2013 *
2014 *	This call snapshots the internal irqchip state of an
2015 *	interrupt, returning into @state the bit corresponding to
2016 *	stage @which
2017 *
2018 *	This function should be called with preemption disabled if the
2019 *	interrupt controller has per-cpu registers.
2020 */
2021int irq_get_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2022			  bool *state)
2023{
2024	struct irq_desc *desc;
2025	struct irq_data *data;
2026	struct irq_chip *chip;
2027	unsigned long flags;
2028	int err = -EINVAL;
2029
2030	desc = irq_get_desc_buslock(irq, &flags, 0);
2031	if (!desc)
2032		return err;
2033
2034	data = irq_desc_get_irq_data(desc);
2035
2036	do {
2037		chip = irq_data_get_irq_chip(data);
2038		if (chip->irq_get_irqchip_state)
2039			break;
2040#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2041		data = data->parent_data;
2042#else
2043		data = NULL;
2044#endif
2045	} while (data);
2046
2047	if (data)
2048		err = chip->irq_get_irqchip_state(data, which, state);
2049
2050	irq_put_desc_busunlock(desc, flags);
2051	return err;
2052}
2053EXPORT_SYMBOL_GPL(irq_get_irqchip_state);
2054
2055/**
2056 *	irq_set_irqchip_state - set the state of a forwarded interrupt.
2057 *	@irq: Interrupt line that is forwarded to a VM
2058 *	@which: State to be restored (one of IRQCHIP_STATE_*)
2059 *	@val: Value corresponding to @which
2060 *
2061 *	This call sets the internal irqchip state of an interrupt,
2062 *	depending on the value of @which.
2063 *
2064 *	This function should be called with preemption disabled if the
2065 *	interrupt controller has per-cpu registers.
2066 */
2067int irq_set_irqchip_state(unsigned int irq, enum irqchip_irq_state which,
2068			  bool val)
2069{
2070	struct irq_desc *desc;
2071	struct irq_data *data;
2072	struct irq_chip *chip;
2073	unsigned long flags;
2074	int err = -EINVAL;
2075
2076	desc = irq_get_desc_buslock(irq, &flags, 0);
2077	if (!desc)
2078		return err;
2079
2080	data = irq_desc_get_irq_data(desc);
2081
2082	do {
2083		chip = irq_data_get_irq_chip(data);
2084		if (chip->irq_set_irqchip_state)
2085			break;
2086#ifdef CONFIG_IRQ_DOMAIN_HIERARCHY
2087		data = data->parent_data;
2088#else
2089		data = NULL;
2090#endif
2091	} while (data);
2092
2093	if (data)
2094		err = chip->irq_set_irqchip_state(data, which, val);
2095
2096	irq_put_desc_busunlock(desc, flags);
2097	return err;
2098}
2099EXPORT_SYMBOL_GPL(irq_set_irqchip_state);