Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * serial_tegra.c
4 *
5 * High-speed serial driver for NVIDIA Tegra SoCs
6 *
7 * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
8 *
9 * Author: Laxman Dewangan <ldewangan@nvidia.com>
10 */
11
12#include <linux/clk.h>
13#include <linux/debugfs.h>
14#include <linux/delay.h>
15#include <linux/dmaengine.h>
16#include <linux/dma-mapping.h>
17#include <linux/dmapool.h>
18#include <linux/err.h>
19#include <linux/io.h>
20#include <linux/irq.h>
21#include <linux/module.h>
22#include <linux/of.h>
23#include <linux/of_device.h>
24#include <linux/pagemap.h>
25#include <linux/platform_device.h>
26#include <linux/reset.h>
27#include <linux/serial.h>
28#include <linux/serial_8250.h>
29#include <linux/serial_core.h>
30#include <linux/serial_reg.h>
31#include <linux/slab.h>
32#include <linux/string.h>
33#include <linux/termios.h>
34#include <linux/tty.h>
35#include <linux/tty_flip.h>
36
37#define TEGRA_UART_TYPE "TEGRA_UART"
38#define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE)
39#define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3)
40
41#define TEGRA_UART_RX_DMA_BUFFER_SIZE 4096
42#define TEGRA_UART_LSR_TXFIFO_FULL 0x100
43#define TEGRA_UART_IER_EORD 0x20
44#define TEGRA_UART_MCR_RTS_EN 0x40
45#define TEGRA_UART_MCR_CTS_EN 0x20
46#define TEGRA_UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \
47 UART_LSR_PE | UART_LSR_FE)
48#define TEGRA_UART_IRDA_CSR 0x08
49#define TEGRA_UART_SIR_ENABLED 0x80
50
51#define TEGRA_UART_TX_PIO 1
52#define TEGRA_UART_TX_DMA 2
53#define TEGRA_UART_MIN_DMA 16
54#define TEGRA_UART_FIFO_SIZE 32
55
56/*
57 * Tx fifo trigger level setting in tegra uart is in
58 * reverse way then conventional uart.
59 */
60#define TEGRA_UART_TX_TRIG_16B 0x00
61#define TEGRA_UART_TX_TRIG_8B 0x10
62#define TEGRA_UART_TX_TRIG_4B 0x20
63#define TEGRA_UART_TX_TRIG_1B 0x30
64
65#define TEGRA_UART_MAXIMUM 5
66
67/* Default UART setting when started: 115200 no parity, stop, 8 data bits */
68#define TEGRA_UART_DEFAULT_BAUD 115200
69#define TEGRA_UART_DEFAULT_LSR UART_LCR_WLEN8
70
71/* Tx transfer mode */
72#define TEGRA_TX_PIO 1
73#define TEGRA_TX_DMA 2
74
75/**
76 * tegra_uart_chip_data: SOC specific data.
77 *
78 * @tx_fifo_full_status: Status flag available for checking tx fifo full.
79 * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not.
80 * Tegra30 does not allow this.
81 * @support_clk_src_div: Clock source support the clock divider.
82 */
83struct tegra_uart_chip_data {
84 bool tx_fifo_full_status;
85 bool allow_txfifo_reset_fifo_mode;
86 bool support_clk_src_div;
87};
88
89struct tegra_uart_port {
90 struct uart_port uport;
91 const struct tegra_uart_chip_data *cdata;
92
93 struct clk *uart_clk;
94 struct reset_control *rst;
95 unsigned int current_baud;
96
97 /* Register shadow */
98 unsigned long fcr_shadow;
99 unsigned long mcr_shadow;
100 unsigned long lcr_shadow;
101 unsigned long ier_shadow;
102 bool rts_active;
103
104 int tx_in_progress;
105 unsigned int tx_bytes;
106
107 bool enable_modem_interrupt;
108
109 bool rx_timeout;
110 int rx_in_progress;
111 int symb_bit;
112
113 struct dma_chan *rx_dma_chan;
114 struct dma_chan *tx_dma_chan;
115 dma_addr_t rx_dma_buf_phys;
116 dma_addr_t tx_dma_buf_phys;
117 unsigned char *rx_dma_buf_virt;
118 unsigned char *tx_dma_buf_virt;
119 struct dma_async_tx_descriptor *tx_dma_desc;
120 struct dma_async_tx_descriptor *rx_dma_desc;
121 dma_cookie_t tx_cookie;
122 dma_cookie_t rx_cookie;
123 unsigned int tx_bytes_requested;
124 unsigned int rx_bytes_requested;
125};
126
127static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
128static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup);
129
130static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup,
131 unsigned long reg)
132{
133 return readl(tup->uport.membase + (reg << tup->uport.regshift));
134}
135
136static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val,
137 unsigned long reg)
138{
139 writel(val, tup->uport.membase + (reg << tup->uport.regshift));
140}
141
142static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u)
143{
144 return container_of(u, struct tegra_uart_port, uport);
145}
146
147static unsigned int tegra_uart_get_mctrl(struct uart_port *u)
148{
149 struct tegra_uart_port *tup = to_tegra_uport(u);
150
151 /*
152 * RI - Ring detector is active
153 * CD/DCD/CAR - Carrier detect is always active. For some reason
154 * linux has different names for carrier detect.
155 * DSR - Data Set ready is active as the hardware doesn't support it.
156 * Don't know if the linux support this yet?
157 * CTS - Clear to send. Always set to active, as the hardware handles
158 * CTS automatically.
159 */
160 if (tup->enable_modem_interrupt)
161 return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS;
162 return TIOCM_CTS;
163}
164
165static void set_rts(struct tegra_uart_port *tup, bool active)
166{
167 unsigned long mcr;
168
169 mcr = tup->mcr_shadow;
170 if (active)
171 mcr |= TEGRA_UART_MCR_RTS_EN;
172 else
173 mcr &= ~TEGRA_UART_MCR_RTS_EN;
174 if (mcr != tup->mcr_shadow) {
175 tegra_uart_write(tup, mcr, UART_MCR);
176 tup->mcr_shadow = mcr;
177 }
178}
179
180static void set_dtr(struct tegra_uart_port *tup, bool active)
181{
182 unsigned long mcr;
183
184 mcr = tup->mcr_shadow;
185 if (active)
186 mcr |= UART_MCR_DTR;
187 else
188 mcr &= ~UART_MCR_DTR;
189 if (mcr != tup->mcr_shadow) {
190 tegra_uart_write(tup, mcr, UART_MCR);
191 tup->mcr_shadow = mcr;
192 }
193}
194
195static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
196{
197 struct tegra_uart_port *tup = to_tegra_uport(u);
198 int dtr_enable;
199
200 tup->rts_active = !!(mctrl & TIOCM_RTS);
201 set_rts(tup, tup->rts_active);
202
203 dtr_enable = !!(mctrl & TIOCM_DTR);
204 set_dtr(tup, dtr_enable);
205}
206
207static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
208{
209 struct tegra_uart_port *tup = to_tegra_uport(u);
210 unsigned long lcr;
211
212 lcr = tup->lcr_shadow;
213 if (break_ctl)
214 lcr |= UART_LCR_SBC;
215 else
216 lcr &= ~UART_LCR_SBC;
217 tegra_uart_write(tup, lcr, UART_LCR);
218 tup->lcr_shadow = lcr;
219}
220
221/**
222 * tegra_uart_wait_cycle_time: Wait for N UART clock periods
223 *
224 * @tup: Tegra serial port data structure.
225 * @cycles: Number of clock periods to wait.
226 *
227 * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART
228 * clock speed is 16X the current baud rate.
229 */
230static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup,
231 unsigned int cycles)
232{
233 if (tup->current_baud)
234 udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16));
235}
236
237/* Wait for a symbol-time. */
238static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
239 unsigned int syms)
240{
241 if (tup->current_baud)
242 udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000,
243 tup->current_baud));
244}
245
246static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
247{
248 unsigned long fcr = tup->fcr_shadow;
249
250 if (tup->cdata->allow_txfifo_reset_fifo_mode) {
251 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
252 tegra_uart_write(tup, fcr, UART_FCR);
253 } else {
254 fcr &= ~UART_FCR_ENABLE_FIFO;
255 tegra_uart_write(tup, fcr, UART_FCR);
256 udelay(60);
257 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
258 tegra_uart_write(tup, fcr, UART_FCR);
259 fcr |= UART_FCR_ENABLE_FIFO;
260 tegra_uart_write(tup, fcr, UART_FCR);
261 }
262
263 /* Dummy read to ensure the write is posted */
264 tegra_uart_read(tup, UART_SCR);
265
266 /*
267 * For all tegra devices (up to t210), there is a hardware issue that
268 * requires software to wait for 32 UART clock periods for the flush
269 * to propagate, otherwise data could be lost.
270 */
271 tegra_uart_wait_cycle_time(tup, 32);
272}
273
274static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
275{
276 unsigned long rate;
277 unsigned int divisor;
278 unsigned long lcr;
279 int ret;
280
281 if (tup->current_baud == baud)
282 return 0;
283
284 if (tup->cdata->support_clk_src_div) {
285 rate = baud * 16;
286 ret = clk_set_rate(tup->uart_clk, rate);
287 if (ret < 0) {
288 dev_err(tup->uport.dev,
289 "clk_set_rate() failed for rate %lu\n", rate);
290 return ret;
291 }
292 divisor = 1;
293 } else {
294 rate = clk_get_rate(tup->uart_clk);
295 divisor = DIV_ROUND_CLOSEST(rate, baud * 16);
296 }
297
298 lcr = tup->lcr_shadow;
299 lcr |= UART_LCR_DLAB;
300 tegra_uart_write(tup, lcr, UART_LCR);
301
302 tegra_uart_write(tup, divisor & 0xFF, UART_TX);
303 tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER);
304
305 lcr &= ~UART_LCR_DLAB;
306 tegra_uart_write(tup, lcr, UART_LCR);
307
308 /* Dummy read to ensure the write is posted */
309 tegra_uart_read(tup, UART_SCR);
310
311 tup->current_baud = baud;
312
313 /* wait two character intervals at new rate */
314 tegra_uart_wait_sym_time(tup, 2);
315 return 0;
316}
317
318static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
319 unsigned long lsr)
320{
321 char flag = TTY_NORMAL;
322
323 if (unlikely(lsr & TEGRA_UART_LSR_ANY)) {
324 if (lsr & UART_LSR_OE) {
325 /* Overrrun error */
326 flag = TTY_OVERRUN;
327 tup->uport.icount.overrun++;
328 dev_err(tup->uport.dev, "Got overrun errors\n");
329 } else if (lsr & UART_LSR_PE) {
330 /* Parity error */
331 flag = TTY_PARITY;
332 tup->uport.icount.parity++;
333 dev_err(tup->uport.dev, "Got Parity errors\n");
334 } else if (lsr & UART_LSR_FE) {
335 flag = TTY_FRAME;
336 tup->uport.icount.frame++;
337 dev_err(tup->uport.dev, "Got frame errors\n");
338 } else if (lsr & UART_LSR_BI) {
339 dev_err(tup->uport.dev, "Got Break\n");
340 tup->uport.icount.brk++;
341 /* If FIFO read error without any data, reset Rx FIFO */
342 if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
343 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR);
344 }
345 }
346 return flag;
347}
348
349static int tegra_uart_request_port(struct uart_port *u)
350{
351 return 0;
352}
353
354static void tegra_uart_release_port(struct uart_port *u)
355{
356 /* Nothing to do here */
357}
358
359static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes)
360{
361 struct circ_buf *xmit = &tup->uport.state->xmit;
362 int i;
363
364 for (i = 0; i < max_bytes; i++) {
365 BUG_ON(uart_circ_empty(xmit));
366 if (tup->cdata->tx_fifo_full_status) {
367 unsigned long lsr = tegra_uart_read(tup, UART_LSR);
368 if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL))
369 break;
370 }
371 tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX);
372 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
373 tup->uport.icount.tx++;
374 }
375}
376
377static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup,
378 unsigned int bytes)
379{
380 if (bytes > TEGRA_UART_MIN_DMA)
381 bytes = TEGRA_UART_MIN_DMA;
382
383 tup->tx_in_progress = TEGRA_UART_TX_PIO;
384 tup->tx_bytes = bytes;
385 tup->ier_shadow |= UART_IER_THRI;
386 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
387}
388
389static void tegra_uart_tx_dma_complete(void *args)
390{
391 struct tegra_uart_port *tup = args;
392 struct circ_buf *xmit = &tup->uport.state->xmit;
393 struct dma_tx_state state;
394 unsigned long flags;
395 unsigned int count;
396
397 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
398 count = tup->tx_bytes_requested - state.residue;
399 async_tx_ack(tup->tx_dma_desc);
400 spin_lock_irqsave(&tup->uport.lock, flags);
401 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
402 tup->tx_in_progress = 0;
403 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
404 uart_write_wakeup(&tup->uport);
405 tegra_uart_start_next_tx(tup);
406 spin_unlock_irqrestore(&tup->uport.lock, flags);
407}
408
409static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
410 unsigned long count)
411{
412 struct circ_buf *xmit = &tup->uport.state->xmit;
413 dma_addr_t tx_phys_addr;
414
415 dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys,
416 UART_XMIT_SIZE, DMA_TO_DEVICE);
417
418 tup->tx_bytes = count & ~(0xF);
419 tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail;
420 tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan,
421 tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV,
422 DMA_PREP_INTERRUPT);
423 if (!tup->tx_dma_desc) {
424 dev_err(tup->uport.dev, "Not able to get desc for Tx\n");
425 return -EIO;
426 }
427
428 tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete;
429 tup->tx_dma_desc->callback_param = tup;
430 tup->tx_in_progress = TEGRA_UART_TX_DMA;
431 tup->tx_bytes_requested = tup->tx_bytes;
432 tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc);
433 dma_async_issue_pending(tup->tx_dma_chan);
434 return 0;
435}
436
437static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
438{
439 unsigned long tail;
440 unsigned long count;
441 struct circ_buf *xmit = &tup->uport.state->xmit;
442
443 tail = (unsigned long)&xmit->buf[xmit->tail];
444 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
445 if (!count)
446 return;
447
448 if (count < TEGRA_UART_MIN_DMA)
449 tegra_uart_start_pio_tx(tup, count);
450 else if (BYTES_TO_ALIGN(tail) > 0)
451 tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail));
452 else
453 tegra_uart_start_tx_dma(tup, count);
454}
455
456/* Called by serial core driver with u->lock taken. */
457static void tegra_uart_start_tx(struct uart_port *u)
458{
459 struct tegra_uart_port *tup = to_tegra_uport(u);
460 struct circ_buf *xmit = &u->state->xmit;
461
462 if (!uart_circ_empty(xmit) && !tup->tx_in_progress)
463 tegra_uart_start_next_tx(tup);
464}
465
466static unsigned int tegra_uart_tx_empty(struct uart_port *u)
467{
468 struct tegra_uart_port *tup = to_tegra_uport(u);
469 unsigned int ret = 0;
470 unsigned long flags;
471
472 spin_lock_irqsave(&u->lock, flags);
473 if (!tup->tx_in_progress) {
474 unsigned long lsr = tegra_uart_read(tup, UART_LSR);
475 if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS)
476 ret = TIOCSER_TEMT;
477 }
478 spin_unlock_irqrestore(&u->lock, flags);
479 return ret;
480}
481
482static void tegra_uart_stop_tx(struct uart_port *u)
483{
484 struct tegra_uart_port *tup = to_tegra_uport(u);
485 struct circ_buf *xmit = &tup->uport.state->xmit;
486 struct dma_tx_state state;
487 unsigned int count;
488
489 if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
490 return;
491
492 dmaengine_terminate_all(tup->tx_dma_chan);
493 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
494 count = tup->tx_bytes_requested - state.residue;
495 async_tx_ack(tup->tx_dma_desc);
496 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
497 tup->tx_in_progress = 0;
498}
499
500static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
501{
502 struct circ_buf *xmit = &tup->uport.state->xmit;
503
504 tegra_uart_fill_tx_fifo(tup, tup->tx_bytes);
505 tup->tx_in_progress = 0;
506 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
507 uart_write_wakeup(&tup->uport);
508 tegra_uart_start_next_tx(tup);
509}
510
511static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
512 struct tty_port *tty)
513{
514 do {
515 char flag = TTY_NORMAL;
516 unsigned long lsr = 0;
517 unsigned char ch;
518
519 lsr = tegra_uart_read(tup, UART_LSR);
520 if (!(lsr & UART_LSR_DR))
521 break;
522
523 flag = tegra_uart_decode_rx_error(tup, lsr);
524 ch = (unsigned char) tegra_uart_read(tup, UART_RX);
525 tup->uport.icount.rx++;
526
527 if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
528 tty_insert_flip_char(tty, ch, flag);
529 } while (1);
530}
531
532static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
533 struct tty_port *tty,
534 unsigned int count)
535{
536 int copied;
537
538 /* If count is zero, then there is no data to be copied */
539 if (!count)
540 return;
541
542 tup->uport.icount.rx += count;
543 if (!tty) {
544 dev_err(tup->uport.dev, "No tty port\n");
545 return;
546 }
547 dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
548 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
549 copied = tty_insert_flip_string(tty,
550 ((unsigned char *)(tup->rx_dma_buf_virt)), count);
551 if (copied != count) {
552 WARN_ON(1);
553 dev_err(tup->uport.dev, "RxData copy to tty layer failed\n");
554 }
555 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
556 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
557}
558
559static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
560 unsigned int residue)
561{
562 struct tty_port *port = &tup->uport.state->port;
563 struct tty_struct *tty = tty_port_tty_get(port);
564 unsigned int count;
565
566 async_tx_ack(tup->rx_dma_desc);
567 count = tup->rx_bytes_requested - residue;
568
569 /* If we are here, DMA is stopped */
570 tegra_uart_copy_rx_to_tty(tup, port, count);
571
572 tegra_uart_handle_rx_pio(tup, port);
573 if (tty) {
574 tty_flip_buffer_push(port);
575 tty_kref_put(tty);
576 }
577}
578
579static void tegra_uart_rx_dma_complete(void *args)
580{
581 struct tegra_uart_port *tup = args;
582 struct uart_port *u = &tup->uport;
583 unsigned long flags;
584 struct dma_tx_state state;
585 enum dma_status status;
586
587 spin_lock_irqsave(&u->lock, flags);
588
589 status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
590
591 if (status == DMA_IN_PROGRESS) {
592 dev_dbg(tup->uport.dev, "RX DMA is in progress\n");
593 goto done;
594 }
595
596 /* Deactivate flow control to stop sender */
597 if (tup->rts_active)
598 set_rts(tup, false);
599
600 tegra_uart_rx_buffer_push(tup, 0);
601 tegra_uart_start_rx_dma(tup);
602
603 /* Activate flow control to start transfer */
604 if (tup->rts_active)
605 set_rts(tup, true);
606
607done:
608 spin_unlock_irqrestore(&u->lock, flags);
609}
610
611static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
612{
613 struct dma_tx_state state;
614
615 /* Deactivate flow control to stop sender */
616 if (tup->rts_active)
617 set_rts(tup, false);
618
619 dmaengine_terminate_all(tup->rx_dma_chan);
620 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
621 tegra_uart_rx_buffer_push(tup, state.residue);
622 tegra_uart_start_rx_dma(tup);
623
624 if (tup->rts_active)
625 set_rts(tup, true);
626}
627
628static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup)
629{
630 unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE;
631
632 tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan,
633 tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM,
634 DMA_PREP_INTERRUPT);
635 if (!tup->rx_dma_desc) {
636 dev_err(tup->uport.dev, "Not able to get desc for Rx\n");
637 return -EIO;
638 }
639
640 tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete;
641 tup->rx_dma_desc->callback_param = tup;
642 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
643 count, DMA_TO_DEVICE);
644 tup->rx_bytes_requested = count;
645 tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc);
646 dma_async_issue_pending(tup->rx_dma_chan);
647 return 0;
648}
649
650static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
651{
652 struct tegra_uart_port *tup = to_tegra_uport(u);
653 unsigned long msr;
654
655 msr = tegra_uart_read(tup, UART_MSR);
656 if (!(msr & UART_MSR_ANY_DELTA))
657 return;
658
659 if (msr & UART_MSR_TERI)
660 tup->uport.icount.rng++;
661 if (msr & UART_MSR_DDSR)
662 tup->uport.icount.dsr++;
663 /* We may only get DDCD when HW init and reset */
664 if (msr & UART_MSR_DDCD)
665 uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD);
666 /* Will start/stop_tx accordingly */
667 if (msr & UART_MSR_DCTS)
668 uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
669}
670
671static irqreturn_t tegra_uart_isr(int irq, void *data)
672{
673 struct tegra_uart_port *tup = data;
674 struct uart_port *u = &tup->uport;
675 unsigned long iir;
676 unsigned long ier;
677 bool is_rx_int = false;
678 unsigned long flags;
679
680 spin_lock_irqsave(&u->lock, flags);
681 while (1) {
682 iir = tegra_uart_read(tup, UART_IIR);
683 if (iir & UART_IIR_NO_INT) {
684 if (is_rx_int) {
685 tegra_uart_handle_rx_dma(tup);
686 if (tup->rx_in_progress) {
687 ier = tup->ier_shadow;
688 ier |= (UART_IER_RLSI | UART_IER_RTOIE |
689 TEGRA_UART_IER_EORD);
690 tup->ier_shadow = ier;
691 tegra_uart_write(tup, ier, UART_IER);
692 }
693 }
694 spin_unlock_irqrestore(&u->lock, flags);
695 return IRQ_HANDLED;
696 }
697
698 switch ((iir >> 1) & 0x7) {
699 case 0: /* Modem signal change interrupt */
700 tegra_uart_handle_modem_signal_change(u);
701 break;
702
703 case 1: /* Transmit interrupt only triggered when using PIO */
704 tup->ier_shadow &= ~UART_IER_THRI;
705 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
706 tegra_uart_handle_tx_pio(tup);
707 break;
708
709 case 4: /* End of data */
710 case 6: /* Rx timeout */
711 case 2: /* Receive */
712 if (!is_rx_int) {
713 is_rx_int = true;
714 /* Disable Rx interrupts */
715 ier = tup->ier_shadow;
716 ier |= UART_IER_RDI;
717 tegra_uart_write(tup, ier, UART_IER);
718 ier &= ~(UART_IER_RDI | UART_IER_RLSI |
719 UART_IER_RTOIE | TEGRA_UART_IER_EORD);
720 tup->ier_shadow = ier;
721 tegra_uart_write(tup, ier, UART_IER);
722 }
723 break;
724
725 case 3: /* Receive error */
726 tegra_uart_decode_rx_error(tup,
727 tegra_uart_read(tup, UART_LSR));
728 break;
729
730 case 5: /* break nothing to handle */
731 case 7: /* break nothing to handle */
732 break;
733 }
734 }
735}
736
737static void tegra_uart_stop_rx(struct uart_port *u)
738{
739 struct tegra_uart_port *tup = to_tegra_uport(u);
740 struct dma_tx_state state;
741 unsigned long ier;
742
743 if (tup->rts_active)
744 set_rts(tup, false);
745
746 if (!tup->rx_in_progress)
747 return;
748
749 tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */
750
751 ier = tup->ier_shadow;
752 ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE |
753 TEGRA_UART_IER_EORD);
754 tup->ier_shadow = ier;
755 tegra_uart_write(tup, ier, UART_IER);
756 tup->rx_in_progress = 0;
757 dmaengine_terminate_all(tup->rx_dma_chan);
758 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
759 tegra_uart_rx_buffer_push(tup, state.residue);
760}
761
762static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
763{
764 unsigned long flags;
765 unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud);
766 unsigned long fifo_empty_time = tup->uport.fifosize * char_time;
767 unsigned long wait_time;
768 unsigned long lsr;
769 unsigned long msr;
770 unsigned long mcr;
771
772 /* Disable interrupts */
773 tegra_uart_write(tup, 0, UART_IER);
774
775 lsr = tegra_uart_read(tup, UART_LSR);
776 if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
777 msr = tegra_uart_read(tup, UART_MSR);
778 mcr = tegra_uart_read(tup, UART_MCR);
779 if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS))
780 dev_err(tup->uport.dev,
781 "Tx Fifo not empty, CTS disabled, waiting\n");
782
783 /* Wait for Tx fifo to be empty */
784 while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
785 wait_time = min(fifo_empty_time, 100lu);
786 udelay(wait_time);
787 fifo_empty_time -= wait_time;
788 if (!fifo_empty_time) {
789 msr = tegra_uart_read(tup, UART_MSR);
790 mcr = tegra_uart_read(tup, UART_MCR);
791 if ((mcr & TEGRA_UART_MCR_CTS_EN) &&
792 (msr & UART_MSR_CTS))
793 dev_err(tup->uport.dev,
794 "Slave not ready\n");
795 break;
796 }
797 lsr = tegra_uart_read(tup, UART_LSR);
798 }
799 }
800
801 spin_lock_irqsave(&tup->uport.lock, flags);
802 /* Reset the Rx and Tx FIFOs */
803 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
804 tup->current_baud = 0;
805 spin_unlock_irqrestore(&tup->uport.lock, flags);
806
807 clk_disable_unprepare(tup->uart_clk);
808}
809
810static int tegra_uart_hw_init(struct tegra_uart_port *tup)
811{
812 int ret;
813
814 tup->fcr_shadow = 0;
815 tup->mcr_shadow = 0;
816 tup->lcr_shadow = 0;
817 tup->ier_shadow = 0;
818 tup->current_baud = 0;
819
820 clk_prepare_enable(tup->uart_clk);
821
822 /* Reset the UART controller to clear all previous status.*/
823 reset_control_assert(tup->rst);
824 udelay(10);
825 reset_control_deassert(tup->rst);
826
827 tup->rx_in_progress = 0;
828 tup->tx_in_progress = 0;
829
830 /*
831 * Set the trigger level
832 *
833 * For PIO mode:
834 *
835 * For receive, this will interrupt the CPU after that many number of
836 * bytes are received, for the remaining bytes the receive timeout
837 * interrupt is received. Rx high watermark is set to 4.
838 *
839 * For transmit, if the trasnmit interrupt is enabled, this will
840 * interrupt the CPU when the number of entries in the FIFO reaches the
841 * low watermark. Tx low watermark is set to 16 bytes.
842 *
843 * For DMA mode:
844 *
845 * Set the Tx trigger to 16. This should match the DMA burst size that
846 * programmed in the DMA registers.
847 */
848 tup->fcr_shadow = UART_FCR_ENABLE_FIFO;
849 tup->fcr_shadow |= UART_FCR_R_TRIG_01;
850 tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
851 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
852
853 /* Dummy read to ensure the write is posted */
854 tegra_uart_read(tup, UART_SCR);
855
856 /*
857 * For all tegra devices (up to t210), there is a hardware issue that
858 * requires software to wait for 3 UART clock periods after enabling
859 * the TX fifo, otherwise data could be lost.
860 */
861 tegra_uart_wait_cycle_time(tup, 3);
862
863 /*
864 * Initialize the UART with default configuration
865 * (115200, N, 8, 1) so that the receive DMA buffer may be
866 * enqueued
867 */
868 tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
869 tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
870 tup->fcr_shadow |= UART_FCR_DMA_SELECT;
871 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
872
873 ret = tegra_uart_start_rx_dma(tup);
874 if (ret < 0) {
875 dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
876 return ret;
877 }
878 tup->rx_in_progress = 1;
879
880 /*
881 * Enable IE_RXS for the receive status interrupts like line errros.
882 * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd.
883 *
884 * If using DMA mode, enable EORD instead of receive interrupt which
885 * will interrupt after the UART is done with the receive instead of
886 * the interrupt when the FIFO "threshold" is reached.
887 *
888 * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when
889 * the DATA is sitting in the FIFO and couldn't be transferred to the
890 * DMA as the DMA size alignment(4 bytes) is not met. EORD will be
891 * triggered when there is a pause of the incomming data stream for 4
892 * characters long.
893 *
894 * For pauses in the data which is not aligned to 4 bytes, we get
895 * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first
896 * then the EORD.
897 */
898 tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD;
899 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
900 return 0;
901}
902
903static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
904 bool dma_to_memory)
905{
906 if (dma_to_memory) {
907 dmaengine_terminate_all(tup->rx_dma_chan);
908 dma_release_channel(tup->rx_dma_chan);
909 dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
910 tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
911 tup->rx_dma_chan = NULL;
912 tup->rx_dma_buf_phys = 0;
913 tup->rx_dma_buf_virt = NULL;
914 } else {
915 dmaengine_terminate_all(tup->tx_dma_chan);
916 dma_release_channel(tup->tx_dma_chan);
917 dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
918 UART_XMIT_SIZE, DMA_TO_DEVICE);
919 tup->tx_dma_chan = NULL;
920 tup->tx_dma_buf_phys = 0;
921 tup->tx_dma_buf_virt = NULL;
922 }
923}
924
925static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
926 bool dma_to_memory)
927{
928 struct dma_chan *dma_chan;
929 unsigned char *dma_buf;
930 dma_addr_t dma_phys;
931 int ret;
932 struct dma_slave_config dma_sconfig;
933
934 dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
935 dma_to_memory ? "rx" : "tx");
936 if (IS_ERR(dma_chan)) {
937 ret = PTR_ERR(dma_chan);
938 dev_err(tup->uport.dev,
939 "DMA channel alloc failed: %d\n", ret);
940 return ret;
941 }
942
943 if (dma_to_memory) {
944 dma_buf = dma_alloc_coherent(tup->uport.dev,
945 TEGRA_UART_RX_DMA_BUFFER_SIZE,
946 &dma_phys, GFP_KERNEL);
947 if (!dma_buf) {
948 dev_err(tup->uport.dev,
949 "Not able to allocate the dma buffer\n");
950 dma_release_channel(dma_chan);
951 return -ENOMEM;
952 }
953 dma_sconfig.src_addr = tup->uport.mapbase;
954 dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
955 dma_sconfig.src_maxburst = 4;
956 tup->rx_dma_chan = dma_chan;
957 tup->rx_dma_buf_virt = dma_buf;
958 tup->rx_dma_buf_phys = dma_phys;
959 } else {
960 dma_phys = dma_map_single(tup->uport.dev,
961 tup->uport.state->xmit.buf, UART_XMIT_SIZE,
962 DMA_TO_DEVICE);
963 if (dma_mapping_error(tup->uport.dev, dma_phys)) {
964 dev_err(tup->uport.dev, "dma_map_single tx failed\n");
965 dma_release_channel(dma_chan);
966 return -ENOMEM;
967 }
968 dma_buf = tup->uport.state->xmit.buf;
969 dma_sconfig.dst_addr = tup->uport.mapbase;
970 dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
971 dma_sconfig.dst_maxburst = 16;
972 tup->tx_dma_chan = dma_chan;
973 tup->tx_dma_buf_virt = dma_buf;
974 tup->tx_dma_buf_phys = dma_phys;
975 }
976
977 ret = dmaengine_slave_config(dma_chan, &dma_sconfig);
978 if (ret < 0) {
979 dev_err(tup->uport.dev,
980 "Dma slave config failed, err = %d\n", ret);
981 tegra_uart_dma_channel_free(tup, dma_to_memory);
982 return ret;
983 }
984
985 return 0;
986}
987
988static int tegra_uart_startup(struct uart_port *u)
989{
990 struct tegra_uart_port *tup = to_tegra_uport(u);
991 int ret;
992
993 ret = tegra_uart_dma_channel_allocate(tup, false);
994 if (ret < 0) {
995 dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret);
996 return ret;
997 }
998
999 ret = tegra_uart_dma_channel_allocate(tup, true);
1000 if (ret < 0) {
1001 dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret);
1002 goto fail_rx_dma;
1003 }
1004
1005 ret = tegra_uart_hw_init(tup);
1006 if (ret < 0) {
1007 dev_err(u->dev, "Uart HW init failed, err = %d\n", ret);
1008 goto fail_hw_init;
1009 }
1010
1011 ret = request_irq(u->irq, tegra_uart_isr, 0,
1012 dev_name(u->dev), tup);
1013 if (ret < 0) {
1014 dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
1015 goto fail_hw_init;
1016 }
1017 return 0;
1018
1019fail_hw_init:
1020 tegra_uart_dma_channel_free(tup, true);
1021fail_rx_dma:
1022 tegra_uart_dma_channel_free(tup, false);
1023 return ret;
1024}
1025
1026/*
1027 * Flush any TX data submitted for DMA and PIO. Called when the
1028 * TX circular buffer is reset.
1029 */
1030static void tegra_uart_flush_buffer(struct uart_port *u)
1031{
1032 struct tegra_uart_port *tup = to_tegra_uport(u);
1033
1034 tup->tx_bytes = 0;
1035 if (tup->tx_dma_chan)
1036 dmaengine_terminate_all(tup->tx_dma_chan);
1037}
1038
1039static void tegra_uart_shutdown(struct uart_port *u)
1040{
1041 struct tegra_uart_port *tup = to_tegra_uport(u);
1042
1043 tegra_uart_hw_deinit(tup);
1044
1045 tup->rx_in_progress = 0;
1046 tup->tx_in_progress = 0;
1047
1048 tegra_uart_dma_channel_free(tup, true);
1049 tegra_uart_dma_channel_free(tup, false);
1050 free_irq(u->irq, tup);
1051}
1052
1053static void tegra_uart_enable_ms(struct uart_port *u)
1054{
1055 struct tegra_uart_port *tup = to_tegra_uport(u);
1056
1057 if (tup->enable_modem_interrupt) {
1058 tup->ier_shadow |= UART_IER_MSI;
1059 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
1060 }
1061}
1062
1063static void tegra_uart_set_termios(struct uart_port *u,
1064 struct ktermios *termios, struct ktermios *oldtermios)
1065{
1066 struct tegra_uart_port *tup = to_tegra_uport(u);
1067 unsigned int baud;
1068 unsigned long flags;
1069 unsigned int lcr;
1070 int symb_bit = 1;
1071 struct clk *parent_clk = clk_get_parent(tup->uart_clk);
1072 unsigned long parent_clk_rate = clk_get_rate(parent_clk);
1073 int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF;
1074
1075 max_divider *= 16;
1076 spin_lock_irqsave(&u->lock, flags);
1077
1078 /* Changing configuration, it is safe to stop any rx now */
1079 if (tup->rts_active)
1080 set_rts(tup, false);
1081
1082 /* Clear all interrupts as configuration is going to be change */
1083 tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER);
1084 tegra_uart_read(tup, UART_IER);
1085 tegra_uart_write(tup, 0, UART_IER);
1086 tegra_uart_read(tup, UART_IER);
1087
1088 /* Parity */
1089 lcr = tup->lcr_shadow;
1090 lcr &= ~UART_LCR_PARITY;
1091
1092 /* CMSPAR isn't supported by this driver */
1093 termios->c_cflag &= ~CMSPAR;
1094
1095 if ((termios->c_cflag & PARENB) == PARENB) {
1096 symb_bit++;
1097 if (termios->c_cflag & PARODD) {
1098 lcr |= UART_LCR_PARITY;
1099 lcr &= ~UART_LCR_EPAR;
1100 lcr &= ~UART_LCR_SPAR;
1101 } else {
1102 lcr |= UART_LCR_PARITY;
1103 lcr |= UART_LCR_EPAR;
1104 lcr &= ~UART_LCR_SPAR;
1105 }
1106 }
1107
1108 lcr &= ~UART_LCR_WLEN8;
1109 switch (termios->c_cflag & CSIZE) {
1110 case CS5:
1111 lcr |= UART_LCR_WLEN5;
1112 symb_bit += 5;
1113 break;
1114 case CS6:
1115 lcr |= UART_LCR_WLEN6;
1116 symb_bit += 6;
1117 break;
1118 case CS7:
1119 lcr |= UART_LCR_WLEN7;
1120 symb_bit += 7;
1121 break;
1122 default:
1123 lcr |= UART_LCR_WLEN8;
1124 symb_bit += 8;
1125 break;
1126 }
1127
1128 /* Stop bits */
1129 if (termios->c_cflag & CSTOPB) {
1130 lcr |= UART_LCR_STOP;
1131 symb_bit += 2;
1132 } else {
1133 lcr &= ~UART_LCR_STOP;
1134 symb_bit++;
1135 }
1136
1137 tegra_uart_write(tup, lcr, UART_LCR);
1138 tup->lcr_shadow = lcr;
1139 tup->symb_bit = symb_bit;
1140
1141 /* Baud rate. */
1142 baud = uart_get_baud_rate(u, termios, oldtermios,
1143 parent_clk_rate/max_divider,
1144 parent_clk_rate/16);
1145 spin_unlock_irqrestore(&u->lock, flags);
1146 tegra_set_baudrate(tup, baud);
1147 if (tty_termios_baud_rate(termios))
1148 tty_termios_encode_baud_rate(termios, baud, baud);
1149 spin_lock_irqsave(&u->lock, flags);
1150
1151 /* Flow control */
1152 if (termios->c_cflag & CRTSCTS) {
1153 tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN;
1154 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
1155 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
1156 /* if top layer has asked to set rts active then do so here */
1157 if (tup->rts_active)
1158 set_rts(tup, true);
1159 } else {
1160 tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN;
1161 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
1162 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
1163 }
1164
1165 /* update the port timeout based on new settings */
1166 uart_update_timeout(u, termios->c_cflag, baud);
1167
1168 /* Make sure all write has completed */
1169 tegra_uart_read(tup, UART_IER);
1170
1171 /* Reenable interrupt */
1172 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
1173 tegra_uart_read(tup, UART_IER);
1174
1175 spin_unlock_irqrestore(&u->lock, flags);
1176}
1177
1178static const char *tegra_uart_type(struct uart_port *u)
1179{
1180 return TEGRA_UART_TYPE;
1181}
1182
1183static const struct uart_ops tegra_uart_ops = {
1184 .tx_empty = tegra_uart_tx_empty,
1185 .set_mctrl = tegra_uart_set_mctrl,
1186 .get_mctrl = tegra_uart_get_mctrl,
1187 .stop_tx = tegra_uart_stop_tx,
1188 .start_tx = tegra_uart_start_tx,
1189 .stop_rx = tegra_uart_stop_rx,
1190 .flush_buffer = tegra_uart_flush_buffer,
1191 .enable_ms = tegra_uart_enable_ms,
1192 .break_ctl = tegra_uart_break_ctl,
1193 .startup = tegra_uart_startup,
1194 .shutdown = tegra_uart_shutdown,
1195 .set_termios = tegra_uart_set_termios,
1196 .type = tegra_uart_type,
1197 .request_port = tegra_uart_request_port,
1198 .release_port = tegra_uart_release_port,
1199};
1200
1201static struct uart_driver tegra_uart_driver = {
1202 .owner = THIS_MODULE,
1203 .driver_name = "tegra_hsuart",
1204 .dev_name = "ttyTHS",
1205 .cons = NULL,
1206 .nr = TEGRA_UART_MAXIMUM,
1207};
1208
1209static int tegra_uart_parse_dt(struct platform_device *pdev,
1210 struct tegra_uart_port *tup)
1211{
1212 struct device_node *np = pdev->dev.of_node;
1213 int port;
1214
1215 port = of_alias_get_id(np, "serial");
1216 if (port < 0) {
1217 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
1218 return port;
1219 }
1220 tup->uport.line = port;
1221
1222 tup->enable_modem_interrupt = of_property_read_bool(np,
1223 "nvidia,enable-modem-interrupt");
1224 return 0;
1225}
1226
1227static struct tegra_uart_chip_data tegra20_uart_chip_data = {
1228 .tx_fifo_full_status = false,
1229 .allow_txfifo_reset_fifo_mode = true,
1230 .support_clk_src_div = false,
1231};
1232
1233static struct tegra_uart_chip_data tegra30_uart_chip_data = {
1234 .tx_fifo_full_status = true,
1235 .allow_txfifo_reset_fifo_mode = false,
1236 .support_clk_src_div = true,
1237};
1238
1239static const struct of_device_id tegra_uart_of_match[] = {
1240 {
1241 .compatible = "nvidia,tegra30-hsuart",
1242 .data = &tegra30_uart_chip_data,
1243 }, {
1244 .compatible = "nvidia,tegra20-hsuart",
1245 .data = &tegra20_uart_chip_data,
1246 }, {
1247 },
1248};
1249MODULE_DEVICE_TABLE(of, tegra_uart_of_match);
1250
1251static int tegra_uart_probe(struct platform_device *pdev)
1252{
1253 struct tegra_uart_port *tup;
1254 struct uart_port *u;
1255 struct resource *resource;
1256 int ret;
1257 const struct tegra_uart_chip_data *cdata;
1258 const struct of_device_id *match;
1259
1260 match = of_match_device(tegra_uart_of_match, &pdev->dev);
1261 if (!match) {
1262 dev_err(&pdev->dev, "Error: No device match found\n");
1263 return -ENODEV;
1264 }
1265 cdata = match->data;
1266
1267 tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL);
1268 if (!tup) {
1269 dev_err(&pdev->dev, "Failed to allocate memory for tup\n");
1270 return -ENOMEM;
1271 }
1272
1273 ret = tegra_uart_parse_dt(pdev, tup);
1274 if (ret < 0)
1275 return ret;
1276
1277 u = &tup->uport;
1278 u->dev = &pdev->dev;
1279 u->ops = &tegra_uart_ops;
1280 u->type = PORT_TEGRA;
1281 u->fifosize = 32;
1282 tup->cdata = cdata;
1283
1284 platform_set_drvdata(pdev, tup);
1285 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1286 if (!resource) {
1287 dev_err(&pdev->dev, "No IO memory resource\n");
1288 return -ENODEV;
1289 }
1290
1291 u->mapbase = resource->start;
1292 u->membase = devm_ioremap_resource(&pdev->dev, resource);
1293 if (IS_ERR(u->membase))
1294 return PTR_ERR(u->membase);
1295
1296 tup->uart_clk = devm_clk_get(&pdev->dev, NULL);
1297 if (IS_ERR(tup->uart_clk)) {
1298 dev_err(&pdev->dev, "Couldn't get the clock\n");
1299 return PTR_ERR(tup->uart_clk);
1300 }
1301
1302 tup->rst = devm_reset_control_get_exclusive(&pdev->dev, "serial");
1303 if (IS_ERR(tup->rst)) {
1304 dev_err(&pdev->dev, "Couldn't get the reset\n");
1305 return PTR_ERR(tup->rst);
1306 }
1307
1308 u->iotype = UPIO_MEM32;
1309 ret = platform_get_irq(pdev, 0);
1310 if (ret < 0) {
1311 dev_err(&pdev->dev, "Couldn't get IRQ\n");
1312 return ret;
1313 }
1314 u->irq = ret;
1315 u->regshift = 2;
1316 ret = uart_add_one_port(&tegra_uart_driver, u);
1317 if (ret < 0) {
1318 dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret);
1319 return ret;
1320 }
1321 return ret;
1322}
1323
1324static int tegra_uart_remove(struct platform_device *pdev)
1325{
1326 struct tegra_uart_port *tup = platform_get_drvdata(pdev);
1327 struct uart_port *u = &tup->uport;
1328
1329 uart_remove_one_port(&tegra_uart_driver, u);
1330 return 0;
1331}
1332
1333#ifdef CONFIG_PM_SLEEP
1334static int tegra_uart_suspend(struct device *dev)
1335{
1336 struct tegra_uart_port *tup = dev_get_drvdata(dev);
1337 struct uart_port *u = &tup->uport;
1338
1339 return uart_suspend_port(&tegra_uart_driver, u);
1340}
1341
1342static int tegra_uart_resume(struct device *dev)
1343{
1344 struct tegra_uart_port *tup = dev_get_drvdata(dev);
1345 struct uart_port *u = &tup->uport;
1346
1347 return uart_resume_port(&tegra_uart_driver, u);
1348}
1349#endif
1350
1351static const struct dev_pm_ops tegra_uart_pm_ops = {
1352 SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume)
1353};
1354
1355static struct platform_driver tegra_uart_platform_driver = {
1356 .probe = tegra_uart_probe,
1357 .remove = tegra_uart_remove,
1358 .driver = {
1359 .name = "serial-tegra",
1360 .of_match_table = tegra_uart_of_match,
1361 .pm = &tegra_uart_pm_ops,
1362 },
1363};
1364
1365static int __init tegra_uart_init(void)
1366{
1367 int ret;
1368
1369 ret = uart_register_driver(&tegra_uart_driver);
1370 if (ret < 0) {
1371 pr_err("Could not register %s driver\n",
1372 tegra_uart_driver.driver_name);
1373 return ret;
1374 }
1375
1376 ret = platform_driver_register(&tegra_uart_platform_driver);
1377 if (ret < 0) {
1378 pr_err("Uart platform driver register failed, e = %d\n", ret);
1379 uart_unregister_driver(&tegra_uart_driver);
1380 return ret;
1381 }
1382 return 0;
1383}
1384
1385static void __exit tegra_uart_exit(void)
1386{
1387 pr_info("Unloading tegra uart driver\n");
1388 platform_driver_unregister(&tegra_uart_platform_driver);
1389 uart_unregister_driver(&tegra_uart_driver);
1390}
1391
1392module_init(tegra_uart_init);
1393module_exit(tegra_uart_exit);
1394
1395MODULE_ALIAS("platform:serial-tegra");
1396MODULE_DESCRIPTION("High speed UART driver for tegra chipset");
1397MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
1398MODULE_LICENSE("GPL v2");
1/*
2 * serial_tegra.c
3 *
4 * High-speed serial driver for NVIDIA Tegra SoCs
5 *
6 * Copyright (c) 2012-2013, NVIDIA CORPORATION. All rights reserved.
7 *
8 * Author: Laxman Dewangan <ldewangan@nvidia.com>
9 *
10 * This program is free software; you can redistribute it and/or modify it
11 * under the terms and conditions of the GNU General Public License,
12 * version 2, as published by the Free Software Foundation.
13 *
14 * This program is distributed in the hope it will be useful, but WITHOUT
15 * ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
16 * FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License for
17 * more details.
18 *
19 * You should have received a copy of the GNU General Public License
20 * along with this program. If not, see <http://www.gnu.org/licenses/>.
21 */
22
23#include <linux/clk.h>
24#include <linux/debugfs.h>
25#include <linux/delay.h>
26#include <linux/dmaengine.h>
27#include <linux/dma-mapping.h>
28#include <linux/dmapool.h>
29#include <linux/err.h>
30#include <linux/io.h>
31#include <linux/irq.h>
32#include <linux/module.h>
33#include <linux/of.h>
34#include <linux/of_device.h>
35#include <linux/pagemap.h>
36#include <linux/platform_device.h>
37#include <linux/reset.h>
38#include <linux/serial.h>
39#include <linux/serial_8250.h>
40#include <linux/serial_core.h>
41#include <linux/serial_reg.h>
42#include <linux/slab.h>
43#include <linux/string.h>
44#include <linux/termios.h>
45#include <linux/tty.h>
46#include <linux/tty_flip.h>
47
48#define TEGRA_UART_TYPE "TEGRA_UART"
49#define TX_EMPTY_STATUS (UART_LSR_TEMT | UART_LSR_THRE)
50#define BYTES_TO_ALIGN(x) ((unsigned long)(x) & 0x3)
51
52#define TEGRA_UART_RX_DMA_BUFFER_SIZE 4096
53#define TEGRA_UART_LSR_TXFIFO_FULL 0x100
54#define TEGRA_UART_IER_EORD 0x20
55#define TEGRA_UART_MCR_RTS_EN 0x40
56#define TEGRA_UART_MCR_CTS_EN 0x20
57#define TEGRA_UART_LSR_ANY (UART_LSR_OE | UART_LSR_BI | \
58 UART_LSR_PE | UART_LSR_FE)
59#define TEGRA_UART_IRDA_CSR 0x08
60#define TEGRA_UART_SIR_ENABLED 0x80
61
62#define TEGRA_UART_TX_PIO 1
63#define TEGRA_UART_TX_DMA 2
64#define TEGRA_UART_MIN_DMA 16
65#define TEGRA_UART_FIFO_SIZE 32
66
67/*
68 * Tx fifo trigger level setting in tegra uart is in
69 * reverse way then conventional uart.
70 */
71#define TEGRA_UART_TX_TRIG_16B 0x00
72#define TEGRA_UART_TX_TRIG_8B 0x10
73#define TEGRA_UART_TX_TRIG_4B 0x20
74#define TEGRA_UART_TX_TRIG_1B 0x30
75
76#define TEGRA_UART_MAXIMUM 5
77
78/* Default UART setting when started: 115200 no parity, stop, 8 data bits */
79#define TEGRA_UART_DEFAULT_BAUD 115200
80#define TEGRA_UART_DEFAULT_LSR UART_LCR_WLEN8
81
82/* Tx transfer mode */
83#define TEGRA_TX_PIO 1
84#define TEGRA_TX_DMA 2
85
86/**
87 * tegra_uart_chip_data: SOC specific data.
88 *
89 * @tx_fifo_full_status: Status flag available for checking tx fifo full.
90 * @allow_txfifo_reset_fifo_mode: allow_tx fifo reset with fifo mode or not.
91 * Tegra30 does not allow this.
92 * @support_clk_src_div: Clock source support the clock divider.
93 */
94struct tegra_uart_chip_data {
95 bool tx_fifo_full_status;
96 bool allow_txfifo_reset_fifo_mode;
97 bool support_clk_src_div;
98};
99
100struct tegra_uart_port {
101 struct uart_port uport;
102 const struct tegra_uart_chip_data *cdata;
103
104 struct clk *uart_clk;
105 struct reset_control *rst;
106 unsigned int current_baud;
107
108 /* Register shadow */
109 unsigned long fcr_shadow;
110 unsigned long mcr_shadow;
111 unsigned long lcr_shadow;
112 unsigned long ier_shadow;
113 bool rts_active;
114
115 int tx_in_progress;
116 unsigned int tx_bytes;
117
118 bool enable_modem_interrupt;
119
120 bool rx_timeout;
121 int rx_in_progress;
122 int symb_bit;
123
124 struct dma_chan *rx_dma_chan;
125 struct dma_chan *tx_dma_chan;
126 dma_addr_t rx_dma_buf_phys;
127 dma_addr_t tx_dma_buf_phys;
128 unsigned char *rx_dma_buf_virt;
129 unsigned char *tx_dma_buf_virt;
130 struct dma_async_tx_descriptor *tx_dma_desc;
131 struct dma_async_tx_descriptor *rx_dma_desc;
132 dma_cookie_t tx_cookie;
133 dma_cookie_t rx_cookie;
134 unsigned int tx_bytes_requested;
135 unsigned int rx_bytes_requested;
136};
137
138static void tegra_uart_start_next_tx(struct tegra_uart_port *tup);
139static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup);
140
141static inline unsigned long tegra_uart_read(struct tegra_uart_port *tup,
142 unsigned long reg)
143{
144 return readl(tup->uport.membase + (reg << tup->uport.regshift));
145}
146
147static inline void tegra_uart_write(struct tegra_uart_port *tup, unsigned val,
148 unsigned long reg)
149{
150 writel(val, tup->uport.membase + (reg << tup->uport.regshift));
151}
152
153static inline struct tegra_uart_port *to_tegra_uport(struct uart_port *u)
154{
155 return container_of(u, struct tegra_uart_port, uport);
156}
157
158static unsigned int tegra_uart_get_mctrl(struct uart_port *u)
159{
160 struct tegra_uart_port *tup = to_tegra_uport(u);
161
162 /*
163 * RI - Ring detector is active
164 * CD/DCD/CAR - Carrier detect is always active. For some reason
165 * linux has different names for carrier detect.
166 * DSR - Data Set ready is active as the hardware doesn't support it.
167 * Don't know if the linux support this yet?
168 * CTS - Clear to send. Always set to active, as the hardware handles
169 * CTS automatically.
170 */
171 if (tup->enable_modem_interrupt)
172 return TIOCM_RI | TIOCM_CD | TIOCM_DSR | TIOCM_CTS;
173 return TIOCM_CTS;
174}
175
176static void set_rts(struct tegra_uart_port *tup, bool active)
177{
178 unsigned long mcr;
179
180 mcr = tup->mcr_shadow;
181 if (active)
182 mcr |= TEGRA_UART_MCR_RTS_EN;
183 else
184 mcr &= ~TEGRA_UART_MCR_RTS_EN;
185 if (mcr != tup->mcr_shadow) {
186 tegra_uart_write(tup, mcr, UART_MCR);
187 tup->mcr_shadow = mcr;
188 }
189}
190
191static void set_dtr(struct tegra_uart_port *tup, bool active)
192{
193 unsigned long mcr;
194
195 mcr = tup->mcr_shadow;
196 if (active)
197 mcr |= UART_MCR_DTR;
198 else
199 mcr &= ~UART_MCR_DTR;
200 if (mcr != tup->mcr_shadow) {
201 tegra_uart_write(tup, mcr, UART_MCR);
202 tup->mcr_shadow = mcr;
203 }
204}
205
206static void tegra_uart_set_mctrl(struct uart_port *u, unsigned int mctrl)
207{
208 struct tegra_uart_port *tup = to_tegra_uport(u);
209 int dtr_enable;
210
211 tup->rts_active = !!(mctrl & TIOCM_RTS);
212 set_rts(tup, tup->rts_active);
213
214 dtr_enable = !!(mctrl & TIOCM_DTR);
215 set_dtr(tup, dtr_enable);
216}
217
218static void tegra_uart_break_ctl(struct uart_port *u, int break_ctl)
219{
220 struct tegra_uart_port *tup = to_tegra_uport(u);
221 unsigned long lcr;
222
223 lcr = tup->lcr_shadow;
224 if (break_ctl)
225 lcr |= UART_LCR_SBC;
226 else
227 lcr &= ~UART_LCR_SBC;
228 tegra_uart_write(tup, lcr, UART_LCR);
229 tup->lcr_shadow = lcr;
230}
231
232/**
233 * tegra_uart_wait_cycle_time: Wait for N UART clock periods
234 *
235 * @tup: Tegra serial port data structure.
236 * @cycles: Number of clock periods to wait.
237 *
238 * Tegra UARTs are clocked at 16X the baud/bit rate and hence the UART
239 * clock speed is 16X the current baud rate.
240 */
241static void tegra_uart_wait_cycle_time(struct tegra_uart_port *tup,
242 unsigned int cycles)
243{
244 if (tup->current_baud)
245 udelay(DIV_ROUND_UP(cycles * 1000000, tup->current_baud * 16));
246}
247
248/* Wait for a symbol-time. */
249static void tegra_uart_wait_sym_time(struct tegra_uart_port *tup,
250 unsigned int syms)
251{
252 if (tup->current_baud)
253 udelay(DIV_ROUND_UP(syms * tup->symb_bit * 1000000,
254 tup->current_baud));
255}
256
257static void tegra_uart_fifo_reset(struct tegra_uart_port *tup, u8 fcr_bits)
258{
259 unsigned long fcr = tup->fcr_shadow;
260
261 if (tup->cdata->allow_txfifo_reset_fifo_mode) {
262 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
263 tegra_uart_write(tup, fcr, UART_FCR);
264 } else {
265 fcr &= ~UART_FCR_ENABLE_FIFO;
266 tegra_uart_write(tup, fcr, UART_FCR);
267 udelay(60);
268 fcr |= fcr_bits & (UART_FCR_CLEAR_RCVR | UART_FCR_CLEAR_XMIT);
269 tegra_uart_write(tup, fcr, UART_FCR);
270 fcr |= UART_FCR_ENABLE_FIFO;
271 tegra_uart_write(tup, fcr, UART_FCR);
272 }
273
274 /* Dummy read to ensure the write is posted */
275 tegra_uart_read(tup, UART_SCR);
276
277 /*
278 * For all tegra devices (up to t210), there is a hardware issue that
279 * requires software to wait for 32 UART clock periods for the flush
280 * to propagate, otherwise data could be lost.
281 */
282 tegra_uart_wait_cycle_time(tup, 32);
283}
284
285static int tegra_set_baudrate(struct tegra_uart_port *tup, unsigned int baud)
286{
287 unsigned long rate;
288 unsigned int divisor;
289 unsigned long lcr;
290 int ret;
291
292 if (tup->current_baud == baud)
293 return 0;
294
295 if (tup->cdata->support_clk_src_div) {
296 rate = baud * 16;
297 ret = clk_set_rate(tup->uart_clk, rate);
298 if (ret < 0) {
299 dev_err(tup->uport.dev,
300 "clk_set_rate() failed for rate %lu\n", rate);
301 return ret;
302 }
303 divisor = 1;
304 } else {
305 rate = clk_get_rate(tup->uart_clk);
306 divisor = DIV_ROUND_CLOSEST(rate, baud * 16);
307 }
308
309 lcr = tup->lcr_shadow;
310 lcr |= UART_LCR_DLAB;
311 tegra_uart_write(tup, lcr, UART_LCR);
312
313 tegra_uart_write(tup, divisor & 0xFF, UART_TX);
314 tegra_uart_write(tup, ((divisor >> 8) & 0xFF), UART_IER);
315
316 lcr &= ~UART_LCR_DLAB;
317 tegra_uart_write(tup, lcr, UART_LCR);
318
319 /* Dummy read to ensure the write is posted */
320 tegra_uart_read(tup, UART_SCR);
321
322 tup->current_baud = baud;
323
324 /* wait two character intervals at new rate */
325 tegra_uart_wait_sym_time(tup, 2);
326 return 0;
327}
328
329static char tegra_uart_decode_rx_error(struct tegra_uart_port *tup,
330 unsigned long lsr)
331{
332 char flag = TTY_NORMAL;
333
334 if (unlikely(lsr & TEGRA_UART_LSR_ANY)) {
335 if (lsr & UART_LSR_OE) {
336 /* Overrrun error */
337 flag = TTY_OVERRUN;
338 tup->uport.icount.overrun++;
339 dev_err(tup->uport.dev, "Got overrun errors\n");
340 } else if (lsr & UART_LSR_PE) {
341 /* Parity error */
342 flag = TTY_PARITY;
343 tup->uport.icount.parity++;
344 dev_err(tup->uport.dev, "Got Parity errors\n");
345 } else if (lsr & UART_LSR_FE) {
346 flag = TTY_FRAME;
347 tup->uport.icount.frame++;
348 dev_err(tup->uport.dev, "Got frame errors\n");
349 } else if (lsr & UART_LSR_BI) {
350 dev_err(tup->uport.dev, "Got Break\n");
351 tup->uport.icount.brk++;
352 /* If FIFO read error without any data, reset Rx FIFO */
353 if (!(lsr & UART_LSR_DR) && (lsr & UART_LSR_FIFOE))
354 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_RCVR);
355 }
356 }
357 return flag;
358}
359
360static int tegra_uart_request_port(struct uart_port *u)
361{
362 return 0;
363}
364
365static void tegra_uart_release_port(struct uart_port *u)
366{
367 /* Nothing to do here */
368}
369
370static void tegra_uart_fill_tx_fifo(struct tegra_uart_port *tup, int max_bytes)
371{
372 struct circ_buf *xmit = &tup->uport.state->xmit;
373 int i;
374
375 for (i = 0; i < max_bytes; i++) {
376 BUG_ON(uart_circ_empty(xmit));
377 if (tup->cdata->tx_fifo_full_status) {
378 unsigned long lsr = tegra_uart_read(tup, UART_LSR);
379 if ((lsr & TEGRA_UART_LSR_TXFIFO_FULL))
380 break;
381 }
382 tegra_uart_write(tup, xmit->buf[xmit->tail], UART_TX);
383 xmit->tail = (xmit->tail + 1) & (UART_XMIT_SIZE - 1);
384 tup->uport.icount.tx++;
385 }
386}
387
388static void tegra_uart_start_pio_tx(struct tegra_uart_port *tup,
389 unsigned int bytes)
390{
391 if (bytes > TEGRA_UART_MIN_DMA)
392 bytes = TEGRA_UART_MIN_DMA;
393
394 tup->tx_in_progress = TEGRA_UART_TX_PIO;
395 tup->tx_bytes = bytes;
396 tup->ier_shadow |= UART_IER_THRI;
397 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
398}
399
400static void tegra_uart_tx_dma_complete(void *args)
401{
402 struct tegra_uart_port *tup = args;
403 struct circ_buf *xmit = &tup->uport.state->xmit;
404 struct dma_tx_state state;
405 unsigned long flags;
406 unsigned int count;
407
408 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
409 count = tup->tx_bytes_requested - state.residue;
410 async_tx_ack(tup->tx_dma_desc);
411 spin_lock_irqsave(&tup->uport.lock, flags);
412 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
413 tup->tx_in_progress = 0;
414 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
415 uart_write_wakeup(&tup->uport);
416 tegra_uart_start_next_tx(tup);
417 spin_unlock_irqrestore(&tup->uport.lock, flags);
418}
419
420static int tegra_uart_start_tx_dma(struct tegra_uart_port *tup,
421 unsigned long count)
422{
423 struct circ_buf *xmit = &tup->uport.state->xmit;
424 dma_addr_t tx_phys_addr;
425
426 dma_sync_single_for_device(tup->uport.dev, tup->tx_dma_buf_phys,
427 UART_XMIT_SIZE, DMA_TO_DEVICE);
428
429 tup->tx_bytes = count & ~(0xF);
430 tx_phys_addr = tup->tx_dma_buf_phys + xmit->tail;
431 tup->tx_dma_desc = dmaengine_prep_slave_single(tup->tx_dma_chan,
432 tx_phys_addr, tup->tx_bytes, DMA_MEM_TO_DEV,
433 DMA_PREP_INTERRUPT);
434 if (!tup->tx_dma_desc) {
435 dev_err(tup->uport.dev, "Not able to get desc for Tx\n");
436 return -EIO;
437 }
438
439 tup->tx_dma_desc->callback = tegra_uart_tx_dma_complete;
440 tup->tx_dma_desc->callback_param = tup;
441 tup->tx_in_progress = TEGRA_UART_TX_DMA;
442 tup->tx_bytes_requested = tup->tx_bytes;
443 tup->tx_cookie = dmaengine_submit(tup->tx_dma_desc);
444 dma_async_issue_pending(tup->tx_dma_chan);
445 return 0;
446}
447
448static void tegra_uart_start_next_tx(struct tegra_uart_port *tup)
449{
450 unsigned long tail;
451 unsigned long count;
452 struct circ_buf *xmit = &tup->uport.state->xmit;
453
454 tail = (unsigned long)&xmit->buf[xmit->tail];
455 count = CIRC_CNT_TO_END(xmit->head, xmit->tail, UART_XMIT_SIZE);
456 if (!count)
457 return;
458
459 if (count < TEGRA_UART_MIN_DMA)
460 tegra_uart_start_pio_tx(tup, count);
461 else if (BYTES_TO_ALIGN(tail) > 0)
462 tegra_uart_start_pio_tx(tup, BYTES_TO_ALIGN(tail));
463 else
464 tegra_uart_start_tx_dma(tup, count);
465}
466
467/* Called by serial core driver with u->lock taken. */
468static void tegra_uart_start_tx(struct uart_port *u)
469{
470 struct tegra_uart_port *tup = to_tegra_uport(u);
471 struct circ_buf *xmit = &u->state->xmit;
472
473 if (!uart_circ_empty(xmit) && !tup->tx_in_progress)
474 tegra_uart_start_next_tx(tup);
475}
476
477static unsigned int tegra_uart_tx_empty(struct uart_port *u)
478{
479 struct tegra_uart_port *tup = to_tegra_uport(u);
480 unsigned int ret = 0;
481 unsigned long flags;
482
483 spin_lock_irqsave(&u->lock, flags);
484 if (!tup->tx_in_progress) {
485 unsigned long lsr = tegra_uart_read(tup, UART_LSR);
486 if ((lsr & TX_EMPTY_STATUS) == TX_EMPTY_STATUS)
487 ret = TIOCSER_TEMT;
488 }
489 spin_unlock_irqrestore(&u->lock, flags);
490 return ret;
491}
492
493static void tegra_uart_stop_tx(struct uart_port *u)
494{
495 struct tegra_uart_port *tup = to_tegra_uport(u);
496 struct circ_buf *xmit = &tup->uport.state->xmit;
497 struct dma_tx_state state;
498 unsigned int count;
499
500 if (tup->tx_in_progress != TEGRA_UART_TX_DMA)
501 return;
502
503 dmaengine_terminate_all(tup->tx_dma_chan);
504 dmaengine_tx_status(tup->tx_dma_chan, tup->tx_cookie, &state);
505 count = tup->tx_bytes_requested - state.residue;
506 async_tx_ack(tup->tx_dma_desc);
507 xmit->tail = (xmit->tail + count) & (UART_XMIT_SIZE - 1);
508 tup->tx_in_progress = 0;
509}
510
511static void tegra_uart_handle_tx_pio(struct tegra_uart_port *tup)
512{
513 struct circ_buf *xmit = &tup->uport.state->xmit;
514
515 tegra_uart_fill_tx_fifo(tup, tup->tx_bytes);
516 tup->tx_in_progress = 0;
517 if (uart_circ_chars_pending(xmit) < WAKEUP_CHARS)
518 uart_write_wakeup(&tup->uport);
519 tegra_uart_start_next_tx(tup);
520}
521
522static void tegra_uart_handle_rx_pio(struct tegra_uart_port *tup,
523 struct tty_port *tty)
524{
525 do {
526 char flag = TTY_NORMAL;
527 unsigned long lsr = 0;
528 unsigned char ch;
529
530 lsr = tegra_uart_read(tup, UART_LSR);
531 if (!(lsr & UART_LSR_DR))
532 break;
533
534 flag = tegra_uart_decode_rx_error(tup, lsr);
535 ch = (unsigned char) tegra_uart_read(tup, UART_RX);
536 tup->uport.icount.rx++;
537
538 if (!uart_handle_sysrq_char(&tup->uport, ch) && tty)
539 tty_insert_flip_char(tty, ch, flag);
540 } while (1);
541}
542
543static void tegra_uart_copy_rx_to_tty(struct tegra_uart_port *tup,
544 struct tty_port *tty,
545 unsigned int count)
546{
547 int copied;
548
549 /* If count is zero, then there is no data to be copied */
550 if (!count)
551 return;
552
553 tup->uport.icount.rx += count;
554 if (!tty) {
555 dev_err(tup->uport.dev, "No tty port\n");
556 return;
557 }
558 dma_sync_single_for_cpu(tup->uport.dev, tup->rx_dma_buf_phys,
559 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_FROM_DEVICE);
560 copied = tty_insert_flip_string(tty,
561 ((unsigned char *)(tup->rx_dma_buf_virt)), count);
562 if (copied != count) {
563 WARN_ON(1);
564 dev_err(tup->uport.dev, "RxData copy to tty layer failed\n");
565 }
566 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
567 TEGRA_UART_RX_DMA_BUFFER_SIZE, DMA_TO_DEVICE);
568}
569
570static void tegra_uart_rx_buffer_push(struct tegra_uart_port *tup,
571 unsigned int residue)
572{
573 struct tty_port *port = &tup->uport.state->port;
574 struct tty_struct *tty = tty_port_tty_get(port);
575 unsigned int count;
576
577 async_tx_ack(tup->rx_dma_desc);
578 count = tup->rx_bytes_requested - residue;
579
580 /* If we are here, DMA is stopped */
581 tegra_uart_copy_rx_to_tty(tup, port, count);
582
583 tegra_uart_handle_rx_pio(tup, port);
584 if (tty) {
585 tty_flip_buffer_push(port);
586 tty_kref_put(tty);
587 }
588}
589
590static void tegra_uart_rx_dma_complete(void *args)
591{
592 struct tegra_uart_port *tup = args;
593 struct uart_port *u = &tup->uport;
594 unsigned long flags;
595 struct dma_tx_state state;
596 enum dma_status status;
597
598 spin_lock_irqsave(&u->lock, flags);
599
600 status = dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
601
602 if (status == DMA_IN_PROGRESS) {
603 dev_dbg(tup->uport.dev, "RX DMA is in progress\n");
604 goto done;
605 }
606
607 /* Deactivate flow control to stop sender */
608 if (tup->rts_active)
609 set_rts(tup, false);
610
611 tegra_uart_rx_buffer_push(tup, 0);
612 tegra_uart_start_rx_dma(tup);
613
614 /* Activate flow control to start transfer */
615 if (tup->rts_active)
616 set_rts(tup, true);
617
618done:
619 spin_unlock_irqrestore(&u->lock, flags);
620}
621
622static void tegra_uart_handle_rx_dma(struct tegra_uart_port *tup)
623{
624 struct dma_tx_state state;
625
626 /* Deactivate flow control to stop sender */
627 if (tup->rts_active)
628 set_rts(tup, false);
629
630 dmaengine_terminate_all(tup->rx_dma_chan);
631 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
632 tegra_uart_rx_buffer_push(tup, state.residue);
633 tegra_uart_start_rx_dma(tup);
634
635 if (tup->rts_active)
636 set_rts(tup, true);
637}
638
639static int tegra_uart_start_rx_dma(struct tegra_uart_port *tup)
640{
641 unsigned int count = TEGRA_UART_RX_DMA_BUFFER_SIZE;
642
643 tup->rx_dma_desc = dmaengine_prep_slave_single(tup->rx_dma_chan,
644 tup->rx_dma_buf_phys, count, DMA_DEV_TO_MEM,
645 DMA_PREP_INTERRUPT);
646 if (!tup->rx_dma_desc) {
647 dev_err(tup->uport.dev, "Not able to get desc for Rx\n");
648 return -EIO;
649 }
650
651 tup->rx_dma_desc->callback = tegra_uart_rx_dma_complete;
652 tup->rx_dma_desc->callback_param = tup;
653 dma_sync_single_for_device(tup->uport.dev, tup->rx_dma_buf_phys,
654 count, DMA_TO_DEVICE);
655 tup->rx_bytes_requested = count;
656 tup->rx_cookie = dmaengine_submit(tup->rx_dma_desc);
657 dma_async_issue_pending(tup->rx_dma_chan);
658 return 0;
659}
660
661static void tegra_uart_handle_modem_signal_change(struct uart_port *u)
662{
663 struct tegra_uart_port *tup = to_tegra_uport(u);
664 unsigned long msr;
665
666 msr = tegra_uart_read(tup, UART_MSR);
667 if (!(msr & UART_MSR_ANY_DELTA))
668 return;
669
670 if (msr & UART_MSR_TERI)
671 tup->uport.icount.rng++;
672 if (msr & UART_MSR_DDSR)
673 tup->uport.icount.dsr++;
674 /* We may only get DDCD when HW init and reset */
675 if (msr & UART_MSR_DDCD)
676 uart_handle_dcd_change(&tup->uport, msr & UART_MSR_DCD);
677 /* Will start/stop_tx accordingly */
678 if (msr & UART_MSR_DCTS)
679 uart_handle_cts_change(&tup->uport, msr & UART_MSR_CTS);
680}
681
682static irqreturn_t tegra_uart_isr(int irq, void *data)
683{
684 struct tegra_uart_port *tup = data;
685 struct uart_port *u = &tup->uport;
686 unsigned long iir;
687 unsigned long ier;
688 bool is_rx_int = false;
689 unsigned long flags;
690
691 spin_lock_irqsave(&u->lock, flags);
692 while (1) {
693 iir = tegra_uart_read(tup, UART_IIR);
694 if (iir & UART_IIR_NO_INT) {
695 if (is_rx_int) {
696 tegra_uart_handle_rx_dma(tup);
697 if (tup->rx_in_progress) {
698 ier = tup->ier_shadow;
699 ier |= (UART_IER_RLSI | UART_IER_RTOIE |
700 TEGRA_UART_IER_EORD);
701 tup->ier_shadow = ier;
702 tegra_uart_write(tup, ier, UART_IER);
703 }
704 }
705 spin_unlock_irqrestore(&u->lock, flags);
706 return IRQ_HANDLED;
707 }
708
709 switch ((iir >> 1) & 0x7) {
710 case 0: /* Modem signal change interrupt */
711 tegra_uart_handle_modem_signal_change(u);
712 break;
713
714 case 1: /* Transmit interrupt only triggered when using PIO */
715 tup->ier_shadow &= ~UART_IER_THRI;
716 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
717 tegra_uart_handle_tx_pio(tup);
718 break;
719
720 case 4: /* End of data */
721 case 6: /* Rx timeout */
722 case 2: /* Receive */
723 if (!is_rx_int) {
724 is_rx_int = true;
725 /* Disable Rx interrupts */
726 ier = tup->ier_shadow;
727 ier |= UART_IER_RDI;
728 tegra_uart_write(tup, ier, UART_IER);
729 ier &= ~(UART_IER_RDI | UART_IER_RLSI |
730 UART_IER_RTOIE | TEGRA_UART_IER_EORD);
731 tup->ier_shadow = ier;
732 tegra_uart_write(tup, ier, UART_IER);
733 }
734 break;
735
736 case 3: /* Receive error */
737 tegra_uart_decode_rx_error(tup,
738 tegra_uart_read(tup, UART_LSR));
739 break;
740
741 case 5: /* break nothing to handle */
742 case 7: /* break nothing to handle */
743 break;
744 }
745 }
746}
747
748static void tegra_uart_stop_rx(struct uart_port *u)
749{
750 struct tegra_uart_port *tup = to_tegra_uport(u);
751 struct dma_tx_state state;
752 unsigned long ier;
753
754 if (tup->rts_active)
755 set_rts(tup, false);
756
757 if (!tup->rx_in_progress)
758 return;
759
760 tegra_uart_wait_sym_time(tup, 1); /* wait a character interval */
761
762 ier = tup->ier_shadow;
763 ier &= ~(UART_IER_RDI | UART_IER_RLSI | UART_IER_RTOIE |
764 TEGRA_UART_IER_EORD);
765 tup->ier_shadow = ier;
766 tegra_uart_write(tup, ier, UART_IER);
767 tup->rx_in_progress = 0;
768 dmaengine_terminate_all(tup->rx_dma_chan);
769 dmaengine_tx_status(tup->rx_dma_chan, tup->rx_cookie, &state);
770 tegra_uart_rx_buffer_push(tup, state.residue);
771}
772
773static void tegra_uart_hw_deinit(struct tegra_uart_port *tup)
774{
775 unsigned long flags;
776 unsigned long char_time = DIV_ROUND_UP(10000000, tup->current_baud);
777 unsigned long fifo_empty_time = tup->uport.fifosize * char_time;
778 unsigned long wait_time;
779 unsigned long lsr;
780 unsigned long msr;
781 unsigned long mcr;
782
783 /* Disable interrupts */
784 tegra_uart_write(tup, 0, UART_IER);
785
786 lsr = tegra_uart_read(tup, UART_LSR);
787 if ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
788 msr = tegra_uart_read(tup, UART_MSR);
789 mcr = tegra_uart_read(tup, UART_MCR);
790 if ((mcr & TEGRA_UART_MCR_CTS_EN) && (msr & UART_MSR_CTS))
791 dev_err(tup->uport.dev,
792 "Tx Fifo not empty, CTS disabled, waiting\n");
793
794 /* Wait for Tx fifo to be empty */
795 while ((lsr & UART_LSR_TEMT) != UART_LSR_TEMT) {
796 wait_time = min(fifo_empty_time, 100lu);
797 udelay(wait_time);
798 fifo_empty_time -= wait_time;
799 if (!fifo_empty_time) {
800 msr = tegra_uart_read(tup, UART_MSR);
801 mcr = tegra_uart_read(tup, UART_MCR);
802 if ((mcr & TEGRA_UART_MCR_CTS_EN) &&
803 (msr & UART_MSR_CTS))
804 dev_err(tup->uport.dev,
805 "Slave not ready\n");
806 break;
807 }
808 lsr = tegra_uart_read(tup, UART_LSR);
809 }
810 }
811
812 spin_lock_irqsave(&tup->uport.lock, flags);
813 /* Reset the Rx and Tx FIFOs */
814 tegra_uart_fifo_reset(tup, UART_FCR_CLEAR_XMIT | UART_FCR_CLEAR_RCVR);
815 tup->current_baud = 0;
816 spin_unlock_irqrestore(&tup->uport.lock, flags);
817
818 clk_disable_unprepare(tup->uart_clk);
819}
820
821static int tegra_uart_hw_init(struct tegra_uart_port *tup)
822{
823 int ret;
824
825 tup->fcr_shadow = 0;
826 tup->mcr_shadow = 0;
827 tup->lcr_shadow = 0;
828 tup->ier_shadow = 0;
829 tup->current_baud = 0;
830
831 clk_prepare_enable(tup->uart_clk);
832
833 /* Reset the UART controller to clear all previous status.*/
834 reset_control_assert(tup->rst);
835 udelay(10);
836 reset_control_deassert(tup->rst);
837
838 tup->rx_in_progress = 0;
839 tup->tx_in_progress = 0;
840
841 /*
842 * Set the trigger level
843 *
844 * For PIO mode:
845 *
846 * For receive, this will interrupt the CPU after that many number of
847 * bytes are received, for the remaining bytes the receive timeout
848 * interrupt is received. Rx high watermark is set to 4.
849 *
850 * For transmit, if the trasnmit interrupt is enabled, this will
851 * interrupt the CPU when the number of entries in the FIFO reaches the
852 * low watermark. Tx low watermark is set to 16 bytes.
853 *
854 * For DMA mode:
855 *
856 * Set the Tx trigger to 16. This should match the DMA burst size that
857 * programmed in the DMA registers.
858 */
859 tup->fcr_shadow = UART_FCR_ENABLE_FIFO;
860 tup->fcr_shadow |= UART_FCR_R_TRIG_01;
861 tup->fcr_shadow |= TEGRA_UART_TX_TRIG_16B;
862 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
863
864 /* Dummy read to ensure the write is posted */
865 tegra_uart_read(tup, UART_SCR);
866
867 /*
868 * For all tegra devices (up to t210), there is a hardware issue that
869 * requires software to wait for 3 UART clock periods after enabling
870 * the TX fifo, otherwise data could be lost.
871 */
872 tegra_uart_wait_cycle_time(tup, 3);
873
874 /*
875 * Initialize the UART with default configuration
876 * (115200, N, 8, 1) so that the receive DMA buffer may be
877 * enqueued
878 */
879 tup->lcr_shadow = TEGRA_UART_DEFAULT_LSR;
880 tegra_set_baudrate(tup, TEGRA_UART_DEFAULT_BAUD);
881 tup->fcr_shadow |= UART_FCR_DMA_SELECT;
882 tegra_uart_write(tup, tup->fcr_shadow, UART_FCR);
883
884 ret = tegra_uart_start_rx_dma(tup);
885 if (ret < 0) {
886 dev_err(tup->uport.dev, "Not able to start Rx DMA\n");
887 return ret;
888 }
889 tup->rx_in_progress = 1;
890
891 /*
892 * Enable IE_RXS for the receive status interrupts like line errros.
893 * Enable IE_RX_TIMEOUT to get the bytes which cannot be DMA'd.
894 *
895 * If using DMA mode, enable EORD instead of receive interrupt which
896 * will interrupt after the UART is done with the receive instead of
897 * the interrupt when the FIFO "threshold" is reached.
898 *
899 * EORD is different interrupt than RX_TIMEOUT - RX_TIMEOUT occurs when
900 * the DATA is sitting in the FIFO and couldn't be transferred to the
901 * DMA as the DMA size alignment(4 bytes) is not met. EORD will be
902 * triggered when there is a pause of the incomming data stream for 4
903 * characters long.
904 *
905 * For pauses in the data which is not aligned to 4 bytes, we get
906 * both the EORD as well as RX_TIMEOUT - SW sees RX_TIMEOUT first
907 * then the EORD.
908 */
909 tup->ier_shadow = UART_IER_RLSI | UART_IER_RTOIE | TEGRA_UART_IER_EORD;
910 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
911 return 0;
912}
913
914static void tegra_uart_dma_channel_free(struct tegra_uart_port *tup,
915 bool dma_to_memory)
916{
917 if (dma_to_memory) {
918 dmaengine_terminate_all(tup->rx_dma_chan);
919 dma_release_channel(tup->rx_dma_chan);
920 dma_free_coherent(tup->uport.dev, TEGRA_UART_RX_DMA_BUFFER_SIZE,
921 tup->rx_dma_buf_virt, tup->rx_dma_buf_phys);
922 tup->rx_dma_chan = NULL;
923 tup->rx_dma_buf_phys = 0;
924 tup->rx_dma_buf_virt = NULL;
925 } else {
926 dmaengine_terminate_all(tup->tx_dma_chan);
927 dma_release_channel(tup->tx_dma_chan);
928 dma_unmap_single(tup->uport.dev, tup->tx_dma_buf_phys,
929 UART_XMIT_SIZE, DMA_TO_DEVICE);
930 tup->tx_dma_chan = NULL;
931 tup->tx_dma_buf_phys = 0;
932 tup->tx_dma_buf_virt = NULL;
933 }
934}
935
936static int tegra_uart_dma_channel_allocate(struct tegra_uart_port *tup,
937 bool dma_to_memory)
938{
939 struct dma_chan *dma_chan;
940 unsigned char *dma_buf;
941 dma_addr_t dma_phys;
942 int ret;
943 struct dma_slave_config dma_sconfig;
944
945 dma_chan = dma_request_slave_channel_reason(tup->uport.dev,
946 dma_to_memory ? "rx" : "tx");
947 if (IS_ERR(dma_chan)) {
948 ret = PTR_ERR(dma_chan);
949 dev_err(tup->uport.dev,
950 "DMA channel alloc failed: %d\n", ret);
951 return ret;
952 }
953
954 if (dma_to_memory) {
955 dma_buf = dma_alloc_coherent(tup->uport.dev,
956 TEGRA_UART_RX_DMA_BUFFER_SIZE,
957 &dma_phys, GFP_KERNEL);
958 if (!dma_buf) {
959 dev_err(tup->uport.dev,
960 "Not able to allocate the dma buffer\n");
961 dma_release_channel(dma_chan);
962 return -ENOMEM;
963 }
964 dma_sconfig.src_addr = tup->uport.mapbase;
965 dma_sconfig.src_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
966 dma_sconfig.src_maxburst = 4;
967 tup->rx_dma_chan = dma_chan;
968 tup->rx_dma_buf_virt = dma_buf;
969 tup->rx_dma_buf_phys = dma_phys;
970 } else {
971 dma_phys = dma_map_single(tup->uport.dev,
972 tup->uport.state->xmit.buf, UART_XMIT_SIZE,
973 DMA_TO_DEVICE);
974 if (dma_mapping_error(tup->uport.dev, dma_phys)) {
975 dev_err(tup->uport.dev, "dma_map_single tx failed\n");
976 dma_release_channel(dma_chan);
977 return -ENOMEM;
978 }
979 dma_buf = tup->uport.state->xmit.buf;
980 dma_sconfig.dst_addr = tup->uport.mapbase;
981 dma_sconfig.dst_addr_width = DMA_SLAVE_BUSWIDTH_1_BYTE;
982 dma_sconfig.dst_maxburst = 16;
983 tup->tx_dma_chan = dma_chan;
984 tup->tx_dma_buf_virt = dma_buf;
985 tup->tx_dma_buf_phys = dma_phys;
986 }
987
988 ret = dmaengine_slave_config(dma_chan, &dma_sconfig);
989 if (ret < 0) {
990 dev_err(tup->uport.dev,
991 "Dma slave config failed, err = %d\n", ret);
992 tegra_uart_dma_channel_free(tup, dma_to_memory);
993 return ret;
994 }
995
996 return 0;
997}
998
999static int tegra_uart_startup(struct uart_port *u)
1000{
1001 struct tegra_uart_port *tup = to_tegra_uport(u);
1002 int ret;
1003
1004 ret = tegra_uart_dma_channel_allocate(tup, false);
1005 if (ret < 0) {
1006 dev_err(u->dev, "Tx Dma allocation failed, err = %d\n", ret);
1007 return ret;
1008 }
1009
1010 ret = tegra_uart_dma_channel_allocate(tup, true);
1011 if (ret < 0) {
1012 dev_err(u->dev, "Rx Dma allocation failed, err = %d\n", ret);
1013 goto fail_rx_dma;
1014 }
1015
1016 ret = tegra_uart_hw_init(tup);
1017 if (ret < 0) {
1018 dev_err(u->dev, "Uart HW init failed, err = %d\n", ret);
1019 goto fail_hw_init;
1020 }
1021
1022 ret = request_irq(u->irq, tegra_uart_isr, 0,
1023 dev_name(u->dev), tup);
1024 if (ret < 0) {
1025 dev_err(u->dev, "Failed to register ISR for IRQ %d\n", u->irq);
1026 goto fail_hw_init;
1027 }
1028 return 0;
1029
1030fail_hw_init:
1031 tegra_uart_dma_channel_free(tup, true);
1032fail_rx_dma:
1033 tegra_uart_dma_channel_free(tup, false);
1034 return ret;
1035}
1036
1037/*
1038 * Flush any TX data submitted for DMA and PIO. Called when the
1039 * TX circular buffer is reset.
1040 */
1041static void tegra_uart_flush_buffer(struct uart_port *u)
1042{
1043 struct tegra_uart_port *tup = to_tegra_uport(u);
1044
1045 tup->tx_bytes = 0;
1046 if (tup->tx_dma_chan)
1047 dmaengine_terminate_all(tup->tx_dma_chan);
1048}
1049
1050static void tegra_uart_shutdown(struct uart_port *u)
1051{
1052 struct tegra_uart_port *tup = to_tegra_uport(u);
1053
1054 tegra_uart_hw_deinit(tup);
1055
1056 tup->rx_in_progress = 0;
1057 tup->tx_in_progress = 0;
1058
1059 tegra_uart_dma_channel_free(tup, true);
1060 tegra_uart_dma_channel_free(tup, false);
1061 free_irq(u->irq, tup);
1062}
1063
1064static void tegra_uart_enable_ms(struct uart_port *u)
1065{
1066 struct tegra_uart_port *tup = to_tegra_uport(u);
1067
1068 if (tup->enable_modem_interrupt) {
1069 tup->ier_shadow |= UART_IER_MSI;
1070 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
1071 }
1072}
1073
1074static void tegra_uart_set_termios(struct uart_port *u,
1075 struct ktermios *termios, struct ktermios *oldtermios)
1076{
1077 struct tegra_uart_port *tup = to_tegra_uport(u);
1078 unsigned int baud;
1079 unsigned long flags;
1080 unsigned int lcr;
1081 int symb_bit = 1;
1082 struct clk *parent_clk = clk_get_parent(tup->uart_clk);
1083 unsigned long parent_clk_rate = clk_get_rate(parent_clk);
1084 int max_divider = (tup->cdata->support_clk_src_div) ? 0x7FFF : 0xFFFF;
1085
1086 max_divider *= 16;
1087 spin_lock_irqsave(&u->lock, flags);
1088
1089 /* Changing configuration, it is safe to stop any rx now */
1090 if (tup->rts_active)
1091 set_rts(tup, false);
1092
1093 /* Clear all interrupts as configuration is going to be change */
1094 tegra_uart_write(tup, tup->ier_shadow | UART_IER_RDI, UART_IER);
1095 tegra_uart_read(tup, UART_IER);
1096 tegra_uart_write(tup, 0, UART_IER);
1097 tegra_uart_read(tup, UART_IER);
1098
1099 /* Parity */
1100 lcr = tup->lcr_shadow;
1101 lcr &= ~UART_LCR_PARITY;
1102
1103 /* CMSPAR isn't supported by this driver */
1104 termios->c_cflag &= ~CMSPAR;
1105
1106 if ((termios->c_cflag & PARENB) == PARENB) {
1107 symb_bit++;
1108 if (termios->c_cflag & PARODD) {
1109 lcr |= UART_LCR_PARITY;
1110 lcr &= ~UART_LCR_EPAR;
1111 lcr &= ~UART_LCR_SPAR;
1112 } else {
1113 lcr |= UART_LCR_PARITY;
1114 lcr |= UART_LCR_EPAR;
1115 lcr &= ~UART_LCR_SPAR;
1116 }
1117 }
1118
1119 lcr &= ~UART_LCR_WLEN8;
1120 switch (termios->c_cflag & CSIZE) {
1121 case CS5:
1122 lcr |= UART_LCR_WLEN5;
1123 symb_bit += 5;
1124 break;
1125 case CS6:
1126 lcr |= UART_LCR_WLEN6;
1127 symb_bit += 6;
1128 break;
1129 case CS7:
1130 lcr |= UART_LCR_WLEN7;
1131 symb_bit += 7;
1132 break;
1133 default:
1134 lcr |= UART_LCR_WLEN8;
1135 symb_bit += 8;
1136 break;
1137 }
1138
1139 /* Stop bits */
1140 if (termios->c_cflag & CSTOPB) {
1141 lcr |= UART_LCR_STOP;
1142 symb_bit += 2;
1143 } else {
1144 lcr &= ~UART_LCR_STOP;
1145 symb_bit++;
1146 }
1147
1148 tegra_uart_write(tup, lcr, UART_LCR);
1149 tup->lcr_shadow = lcr;
1150 tup->symb_bit = symb_bit;
1151
1152 /* Baud rate. */
1153 baud = uart_get_baud_rate(u, termios, oldtermios,
1154 parent_clk_rate/max_divider,
1155 parent_clk_rate/16);
1156 spin_unlock_irqrestore(&u->lock, flags);
1157 tegra_set_baudrate(tup, baud);
1158 if (tty_termios_baud_rate(termios))
1159 tty_termios_encode_baud_rate(termios, baud, baud);
1160 spin_lock_irqsave(&u->lock, flags);
1161
1162 /* Flow control */
1163 if (termios->c_cflag & CRTSCTS) {
1164 tup->mcr_shadow |= TEGRA_UART_MCR_CTS_EN;
1165 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
1166 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
1167 /* if top layer has asked to set rts active then do so here */
1168 if (tup->rts_active)
1169 set_rts(tup, true);
1170 } else {
1171 tup->mcr_shadow &= ~TEGRA_UART_MCR_CTS_EN;
1172 tup->mcr_shadow &= ~TEGRA_UART_MCR_RTS_EN;
1173 tegra_uart_write(tup, tup->mcr_shadow, UART_MCR);
1174 }
1175
1176 /* update the port timeout based on new settings */
1177 uart_update_timeout(u, termios->c_cflag, baud);
1178
1179 /* Make sure all write has completed */
1180 tegra_uart_read(tup, UART_IER);
1181
1182 /* Reenable interrupt */
1183 tegra_uart_write(tup, tup->ier_shadow, UART_IER);
1184 tegra_uart_read(tup, UART_IER);
1185
1186 spin_unlock_irqrestore(&u->lock, flags);
1187}
1188
1189static const char *tegra_uart_type(struct uart_port *u)
1190{
1191 return TEGRA_UART_TYPE;
1192}
1193
1194static struct uart_ops tegra_uart_ops = {
1195 .tx_empty = tegra_uart_tx_empty,
1196 .set_mctrl = tegra_uart_set_mctrl,
1197 .get_mctrl = tegra_uart_get_mctrl,
1198 .stop_tx = tegra_uart_stop_tx,
1199 .start_tx = tegra_uart_start_tx,
1200 .stop_rx = tegra_uart_stop_rx,
1201 .flush_buffer = tegra_uart_flush_buffer,
1202 .enable_ms = tegra_uart_enable_ms,
1203 .break_ctl = tegra_uart_break_ctl,
1204 .startup = tegra_uart_startup,
1205 .shutdown = tegra_uart_shutdown,
1206 .set_termios = tegra_uart_set_termios,
1207 .type = tegra_uart_type,
1208 .request_port = tegra_uart_request_port,
1209 .release_port = tegra_uart_release_port,
1210};
1211
1212static struct uart_driver tegra_uart_driver = {
1213 .owner = THIS_MODULE,
1214 .driver_name = "tegra_hsuart",
1215 .dev_name = "ttyTHS",
1216 .cons = NULL,
1217 .nr = TEGRA_UART_MAXIMUM,
1218};
1219
1220static int tegra_uart_parse_dt(struct platform_device *pdev,
1221 struct tegra_uart_port *tup)
1222{
1223 struct device_node *np = pdev->dev.of_node;
1224 int port;
1225
1226 port = of_alias_get_id(np, "serial");
1227 if (port < 0) {
1228 dev_err(&pdev->dev, "failed to get alias id, errno %d\n", port);
1229 return port;
1230 }
1231 tup->uport.line = port;
1232
1233 tup->enable_modem_interrupt = of_property_read_bool(np,
1234 "nvidia,enable-modem-interrupt");
1235 return 0;
1236}
1237
1238static struct tegra_uart_chip_data tegra20_uart_chip_data = {
1239 .tx_fifo_full_status = false,
1240 .allow_txfifo_reset_fifo_mode = true,
1241 .support_clk_src_div = false,
1242};
1243
1244static struct tegra_uart_chip_data tegra30_uart_chip_data = {
1245 .tx_fifo_full_status = true,
1246 .allow_txfifo_reset_fifo_mode = false,
1247 .support_clk_src_div = true,
1248};
1249
1250static const struct of_device_id tegra_uart_of_match[] = {
1251 {
1252 .compatible = "nvidia,tegra30-hsuart",
1253 .data = &tegra30_uart_chip_data,
1254 }, {
1255 .compatible = "nvidia,tegra20-hsuart",
1256 .data = &tegra20_uart_chip_data,
1257 }, {
1258 },
1259};
1260MODULE_DEVICE_TABLE(of, tegra_uart_of_match);
1261
1262static int tegra_uart_probe(struct platform_device *pdev)
1263{
1264 struct tegra_uart_port *tup;
1265 struct uart_port *u;
1266 struct resource *resource;
1267 int ret;
1268 const struct tegra_uart_chip_data *cdata;
1269 const struct of_device_id *match;
1270
1271 match = of_match_device(tegra_uart_of_match, &pdev->dev);
1272 if (!match) {
1273 dev_err(&pdev->dev, "Error: No device match found\n");
1274 return -ENODEV;
1275 }
1276 cdata = match->data;
1277
1278 tup = devm_kzalloc(&pdev->dev, sizeof(*tup), GFP_KERNEL);
1279 if (!tup) {
1280 dev_err(&pdev->dev, "Failed to allocate memory for tup\n");
1281 return -ENOMEM;
1282 }
1283
1284 ret = tegra_uart_parse_dt(pdev, tup);
1285 if (ret < 0)
1286 return ret;
1287
1288 u = &tup->uport;
1289 u->dev = &pdev->dev;
1290 u->ops = &tegra_uart_ops;
1291 u->type = PORT_TEGRA;
1292 u->fifosize = 32;
1293 tup->cdata = cdata;
1294
1295 platform_set_drvdata(pdev, tup);
1296 resource = platform_get_resource(pdev, IORESOURCE_MEM, 0);
1297 if (!resource) {
1298 dev_err(&pdev->dev, "No IO memory resource\n");
1299 return -ENODEV;
1300 }
1301
1302 u->mapbase = resource->start;
1303 u->membase = devm_ioremap_resource(&pdev->dev, resource);
1304 if (IS_ERR(u->membase))
1305 return PTR_ERR(u->membase);
1306
1307 tup->uart_clk = devm_clk_get(&pdev->dev, NULL);
1308 if (IS_ERR(tup->uart_clk)) {
1309 dev_err(&pdev->dev, "Couldn't get the clock\n");
1310 return PTR_ERR(tup->uart_clk);
1311 }
1312
1313 tup->rst = devm_reset_control_get(&pdev->dev, "serial");
1314 if (IS_ERR(tup->rst)) {
1315 dev_err(&pdev->dev, "Couldn't get the reset\n");
1316 return PTR_ERR(tup->rst);
1317 }
1318
1319 u->iotype = UPIO_MEM32;
1320 ret = platform_get_irq(pdev, 0);
1321 if (ret < 0) {
1322 dev_err(&pdev->dev, "Couldn't get IRQ\n");
1323 return ret;
1324 }
1325 u->irq = ret;
1326 u->regshift = 2;
1327 ret = uart_add_one_port(&tegra_uart_driver, u);
1328 if (ret < 0) {
1329 dev_err(&pdev->dev, "Failed to add uart port, err %d\n", ret);
1330 return ret;
1331 }
1332 return ret;
1333}
1334
1335static int tegra_uart_remove(struct platform_device *pdev)
1336{
1337 struct tegra_uart_port *tup = platform_get_drvdata(pdev);
1338 struct uart_port *u = &tup->uport;
1339
1340 uart_remove_one_port(&tegra_uart_driver, u);
1341 return 0;
1342}
1343
1344#ifdef CONFIG_PM_SLEEP
1345static int tegra_uart_suspend(struct device *dev)
1346{
1347 struct tegra_uart_port *tup = dev_get_drvdata(dev);
1348 struct uart_port *u = &tup->uport;
1349
1350 return uart_suspend_port(&tegra_uart_driver, u);
1351}
1352
1353static int tegra_uart_resume(struct device *dev)
1354{
1355 struct tegra_uart_port *tup = dev_get_drvdata(dev);
1356 struct uart_port *u = &tup->uport;
1357
1358 return uart_resume_port(&tegra_uart_driver, u);
1359}
1360#endif
1361
1362static const struct dev_pm_ops tegra_uart_pm_ops = {
1363 SET_SYSTEM_SLEEP_PM_OPS(tegra_uart_suspend, tegra_uart_resume)
1364};
1365
1366static struct platform_driver tegra_uart_platform_driver = {
1367 .probe = tegra_uart_probe,
1368 .remove = tegra_uart_remove,
1369 .driver = {
1370 .name = "serial-tegra",
1371 .of_match_table = tegra_uart_of_match,
1372 .pm = &tegra_uart_pm_ops,
1373 },
1374};
1375
1376static int __init tegra_uart_init(void)
1377{
1378 int ret;
1379
1380 ret = uart_register_driver(&tegra_uart_driver);
1381 if (ret < 0) {
1382 pr_err("Could not register %s driver\n",
1383 tegra_uart_driver.driver_name);
1384 return ret;
1385 }
1386
1387 ret = platform_driver_register(&tegra_uart_platform_driver);
1388 if (ret < 0) {
1389 pr_err("Uart platform driver register failed, e = %d\n", ret);
1390 uart_unregister_driver(&tegra_uart_driver);
1391 return ret;
1392 }
1393 return 0;
1394}
1395
1396static void __exit tegra_uart_exit(void)
1397{
1398 pr_info("Unloading tegra uart driver\n");
1399 platform_driver_unregister(&tegra_uart_platform_driver);
1400 uart_unregister_driver(&tegra_uart_driver);
1401}
1402
1403module_init(tegra_uart_init);
1404module_exit(tegra_uart_exit);
1405
1406MODULE_ALIAS("platform:serial-tegra");
1407MODULE_DESCRIPTION("High speed UART driver for tegra chipset");
1408MODULE_AUTHOR("Laxman Dewangan <ldewangan@nvidia.com>");
1409MODULE_LICENSE("GPL v2");