Loading...
1// SPDX-License-Identifier: GPL-2.0+
2/*
3 * IBM Hot Plug Controller Driver
4 *
5 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
6 *
7 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
8 * Copyright (C) 2001-2003 IBM Corp.
9 *
10 * All rights reserved.
11 *
12 * Send feedback to <gregkh@us.ibm.com>
13 *
14 */
15
16#include <linux/init.h>
17#include <linux/module.h>
18#include <linux/slab.h>
19#include <linux/pci.h>
20#include <linux/interrupt.h>
21#include <linux/delay.h>
22#include <linux/wait.h>
23#include "../pci.h"
24#include <asm/pci_x86.h> /* for struct irq_routing_table */
25#include <asm/io_apic.h>
26#include "ibmphp.h"
27
28#define attn_on(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNON)
29#define attn_off(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNOFF)
30#define attn_LED_blink(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_BLINKLED)
31#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot(sl, READ_REVLEVEL, rev)
32#define get_hpc_options(sl, opt) ibmphp_hpc_readslot(sl, READ_HPCOPTIONS, opt)
33
34#define DRIVER_VERSION "0.6"
35#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver"
36
37int ibmphp_debug;
38
39static bool debug;
40module_param(debug, bool, S_IRUGO | S_IWUSR);
41MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
42MODULE_LICENSE("GPL");
43MODULE_DESCRIPTION(DRIVER_DESC);
44
45struct pci_bus *ibmphp_pci_bus;
46static int max_slots;
47
48static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS
49 * tables don't provide default info for empty slots */
50
51static int init_flag;
52
53/*
54static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8);
55
56static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value)
57{
58 return get_max_adapter_speed_1 (hs, value, 1);
59}
60*/
61static inline int get_cur_bus_info(struct slot **sl)
62{
63 int rc = 1;
64 struct slot *slot_cur = *sl;
65
66 debug("options = %x\n", slot_cur->ctrl->options);
67 debug("revision = %x\n", slot_cur->ctrl->revision);
68
69 if (READ_BUS_STATUS(slot_cur->ctrl))
70 rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
71
72 if (rc)
73 return rc;
74
75 slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
76 if (READ_BUS_MODE(slot_cur->ctrl))
77 slot_cur->bus_on->current_bus_mode =
78 CURRENT_BUS_MODE(slot_cur->busstatus);
79 else
80 slot_cur->bus_on->current_bus_mode = 0xFF;
81
82 debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n",
83 slot_cur->busstatus,
84 slot_cur->bus_on->current_speed,
85 slot_cur->bus_on->current_bus_mode);
86
87 *sl = slot_cur;
88 return 0;
89}
90
91static inline int slot_update(struct slot **sl)
92{
93 int rc;
94 rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
95 if (rc)
96 return rc;
97 if (!init_flag)
98 rc = get_cur_bus_info(sl);
99 return rc;
100}
101
102static int __init get_max_slots(void)
103{
104 struct slot *slot_cur;
105 u8 slot_count = 0;
106
107 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
108 /* sometimes the hot-pluggable slots start with 4 (not always from 1) */
109 slot_count = max(slot_count, slot_cur->number);
110 }
111 return slot_count;
112}
113
114/* This routine will put the correct slot->device information per slot. It's
115 * called from initialization of the slot structures. It will also assign
116 * interrupt numbers per each slot.
117 * Parameters: struct slot
118 * Returns 0 or errors
119 */
120int ibmphp_init_devno(struct slot **cur_slot)
121{
122 struct irq_routing_table *rtable;
123 int len;
124 int loop;
125 int i;
126
127 rtable = pcibios_get_irq_routing_table();
128 if (!rtable) {
129 err("no BIOS routing table...\n");
130 return -ENOMEM;
131 }
132
133 len = (rtable->size - sizeof(struct irq_routing_table)) /
134 sizeof(struct irq_info);
135
136 if (!len) {
137 kfree(rtable);
138 return -1;
139 }
140 for (loop = 0; loop < len; loop++) {
141 if ((*cur_slot)->number == rtable->slots[loop].slot &&
142 (*cur_slot)->bus == rtable->slots[loop].bus) {
143 (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
144 for (i = 0; i < 4; i++)
145 (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
146 (int) (*cur_slot)->device, i);
147
148 debug("(*cur_slot)->irq[0] = %x\n",
149 (*cur_slot)->irq[0]);
150 debug("(*cur_slot)->irq[1] = %x\n",
151 (*cur_slot)->irq[1]);
152 debug("(*cur_slot)->irq[2] = %x\n",
153 (*cur_slot)->irq[2]);
154 debug("(*cur_slot)->irq[3] = %x\n",
155 (*cur_slot)->irq[3]);
156
157 debug("rtable->exclusive_irqs = %x\n",
158 rtable->exclusive_irqs);
159 debug("rtable->slots[loop].irq[0].bitmap = %x\n",
160 rtable->slots[loop].irq[0].bitmap);
161 debug("rtable->slots[loop].irq[1].bitmap = %x\n",
162 rtable->slots[loop].irq[1].bitmap);
163 debug("rtable->slots[loop].irq[2].bitmap = %x\n",
164 rtable->slots[loop].irq[2].bitmap);
165 debug("rtable->slots[loop].irq[3].bitmap = %x\n",
166 rtable->slots[loop].irq[3].bitmap);
167
168 debug("rtable->slots[loop].irq[0].link = %x\n",
169 rtable->slots[loop].irq[0].link);
170 debug("rtable->slots[loop].irq[1].link = %x\n",
171 rtable->slots[loop].irq[1].link);
172 debug("rtable->slots[loop].irq[2].link = %x\n",
173 rtable->slots[loop].irq[2].link);
174 debug("rtable->slots[loop].irq[3].link = %x\n",
175 rtable->slots[loop].irq[3].link);
176 debug("end of init_devno\n");
177 kfree(rtable);
178 return 0;
179 }
180 }
181
182 kfree(rtable);
183 return -1;
184}
185
186static inline int power_on(struct slot *slot_cur)
187{
188 u8 cmd = HPC_SLOT_ON;
189 int retval;
190
191 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
192 if (retval) {
193 err("power on failed\n");
194 return retval;
195 }
196 if (CTLR_RESULT(slot_cur->ctrl->status)) {
197 err("command not completed successfully in power_on\n");
198 return -EIO;
199 }
200 msleep(3000); /* For ServeRAID cards, and some 66 PCI */
201 return 0;
202}
203
204static inline int power_off(struct slot *slot_cur)
205{
206 u8 cmd = HPC_SLOT_OFF;
207 int retval;
208
209 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
210 if (retval) {
211 err("power off failed\n");
212 return retval;
213 }
214 if (CTLR_RESULT(slot_cur->ctrl->status)) {
215 err("command not completed successfully in power_off\n");
216 retval = -EIO;
217 }
218 return retval;
219}
220
221static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
222{
223 int rc = 0;
224 struct slot *pslot;
225 u8 cmd = 0x00; /* avoid compiler warning */
226
227 debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
228 (ulong) hotplug_slot, value);
229 ibmphp_lock_operations();
230
231
232 if (hotplug_slot) {
233 switch (value) {
234 case HPC_SLOT_ATTN_OFF:
235 cmd = HPC_SLOT_ATTNOFF;
236 break;
237 case HPC_SLOT_ATTN_ON:
238 cmd = HPC_SLOT_ATTNON;
239 break;
240 case HPC_SLOT_ATTN_BLINK:
241 cmd = HPC_SLOT_BLINKLED;
242 break;
243 default:
244 rc = -ENODEV;
245 err("set_attention_status - Error : invalid input [%x]\n",
246 value);
247 break;
248 }
249 if (rc == 0) {
250 pslot = hotplug_slot->private;
251 if (pslot)
252 rc = ibmphp_hpc_writeslot(pslot, cmd);
253 else
254 rc = -ENODEV;
255 }
256 } else
257 rc = -ENODEV;
258
259 ibmphp_unlock_operations();
260
261 debug("set_attention_status - Exit rc[%d]\n", rc);
262 return rc;
263}
264
265static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
266{
267 int rc = -ENODEV;
268 struct slot *pslot;
269 struct slot myslot;
270
271 debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
272 (ulong) hotplug_slot, (ulong) value);
273
274 ibmphp_lock_operations();
275 if (hotplug_slot) {
276 pslot = hotplug_slot->private;
277 if (pslot) {
278 memcpy(&myslot, pslot, sizeof(struct slot));
279 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
280 &(myslot.status));
281 if (!rc)
282 rc = ibmphp_hpc_readslot(pslot,
283 READ_EXTSLOTSTATUS,
284 &(myslot.ext_status));
285 if (!rc)
286 *value = SLOT_ATTN(myslot.status,
287 myslot.ext_status);
288 }
289 }
290
291 ibmphp_unlock_operations();
292 debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value);
293 return rc;
294}
295
296static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
297{
298 int rc = -ENODEV;
299 struct slot *pslot;
300 struct slot myslot;
301
302 debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
303 (ulong) hotplug_slot, (ulong) value);
304 ibmphp_lock_operations();
305 if (hotplug_slot) {
306 pslot = hotplug_slot->private;
307 if (pslot) {
308 memcpy(&myslot, pslot, sizeof(struct slot));
309 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
310 &(myslot.status));
311 if (!rc)
312 *value = SLOT_LATCH(myslot.status);
313 }
314 }
315
316 ibmphp_unlock_operations();
317 debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n",
318 rc, rc, *value);
319 return rc;
320}
321
322
323static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
324{
325 int rc = -ENODEV;
326 struct slot *pslot;
327 struct slot myslot;
328
329 debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
330 (ulong) hotplug_slot, (ulong) value);
331 ibmphp_lock_operations();
332 if (hotplug_slot) {
333 pslot = hotplug_slot->private;
334 if (pslot) {
335 memcpy(&myslot, pslot, sizeof(struct slot));
336 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
337 &(myslot.status));
338 if (!rc)
339 *value = SLOT_PWRGD(myslot.status);
340 }
341 }
342
343 ibmphp_unlock_operations();
344 debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n",
345 rc, rc, *value);
346 return rc;
347}
348
349static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value)
350{
351 int rc = -ENODEV;
352 struct slot *pslot;
353 u8 present;
354 struct slot myslot;
355
356 debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
357 (ulong) hotplug_slot, (ulong) value);
358 ibmphp_lock_operations();
359 if (hotplug_slot) {
360 pslot = hotplug_slot->private;
361 if (pslot) {
362 memcpy(&myslot, pslot, sizeof(struct slot));
363 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
364 &(myslot.status));
365 if (!rc) {
366 present = SLOT_PRESENT(myslot.status);
367 if (present == HPC_SLOT_EMPTY)
368 *value = 0;
369 else
370 *value = 1;
371 }
372 }
373 }
374
375 ibmphp_unlock_operations();
376 debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value);
377 return rc;
378}
379
380static int get_max_bus_speed(struct slot *slot)
381{
382 int rc;
383 u8 mode = 0;
384 enum pci_bus_speed speed;
385 struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
386
387 debug("%s - Entry slot[%p]\n", __func__, slot);
388
389 ibmphp_lock_operations();
390 mode = slot->supported_bus_mode;
391 speed = slot->supported_speed;
392 ibmphp_unlock_operations();
393
394 switch (speed) {
395 case BUS_SPEED_33:
396 break;
397 case BUS_SPEED_66:
398 if (mode == BUS_MODE_PCIX)
399 speed += 0x01;
400 break;
401 case BUS_SPEED_100:
402 case BUS_SPEED_133:
403 speed += 0x01;
404 break;
405 default:
406 /* Note (will need to change): there would be soon 256, 512 also */
407 rc = -ENODEV;
408 }
409
410 if (!rc)
411 bus->max_bus_speed = speed;
412
413 debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
414 return rc;
415}
416
417/*
418static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 *value, u8 flag)
419{
420 int rc = -ENODEV;
421 struct slot *pslot;
422 struct slot myslot;
423
424 debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n",
425 (ulong)hotplug_slot, (ulong) value);
426
427 if (flag)
428 ibmphp_lock_operations();
429
430 if (hotplug_slot && value) {
431 pslot = hotplug_slot->private;
432 if (pslot) {
433 memcpy(&myslot, pslot, sizeof(struct slot));
434 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
435 &(myslot.status));
436
437 if (!(SLOT_LATCH (myslot.status)) &&
438 (SLOT_PRESENT (myslot.status))) {
439 rc = ibmphp_hpc_readslot(pslot,
440 READ_EXTSLOTSTATUS,
441 &(myslot.ext_status));
442 if (!rc)
443 *value = SLOT_SPEED(myslot.ext_status);
444 } else
445 *value = MAX_ADAPTER_NONE;
446 }
447 }
448
449 if (flag)
450 ibmphp_unlock_operations();
451
452 debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value);
453 return rc;
454}
455
456static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value)
457{
458 int rc = -ENODEV;
459 struct slot *pslot = NULL;
460
461 debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot);
462
463 ibmphp_lock_operations();
464
465 if (hotplug_slot) {
466 pslot = hotplug_slot->private;
467 if (pslot) {
468 rc = 0;
469 snprintf(value, 100, "Bus %x", pslot->bus);
470 }
471 } else
472 rc = -ENODEV;
473
474 ibmphp_unlock_operations();
475 debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
476 return rc;
477}
478*/
479
480/****************************************************************************
481 * This routine will initialize the ops data structure used in the validate
482 * function. It will also power off empty slots that are powered on since BIOS
483 * leaves those on, albeit disconnected
484 ****************************************************************************/
485static int __init init_ops(void)
486{
487 struct slot *slot_cur;
488 int retval;
489 int rc;
490
491 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
492 debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
493 slot_cur->number);
494 if (slot_cur->ctrl->revision == 0xFF)
495 if (get_ctrl_revision(slot_cur,
496 &slot_cur->ctrl->revision))
497 return -1;
498
499 if (slot_cur->bus_on->current_speed == 0xFF)
500 if (get_cur_bus_info(&slot_cur))
501 return -1;
502 get_max_bus_speed(slot_cur);
503
504 if (slot_cur->ctrl->options == 0xFF)
505 if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
506 return -1;
507
508 retval = slot_update(&slot_cur);
509 if (retval)
510 return retval;
511
512 debug("status = %x\n", slot_cur->status);
513 debug("ext_status = %x\n", slot_cur->ext_status);
514 debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status));
515 debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
516 debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
517
518 if ((SLOT_PWRGD(slot_cur->status)) &&
519 !(SLOT_PRESENT(slot_cur->status)) &&
520 !(SLOT_LATCH(slot_cur->status))) {
521 debug("BEFORE POWER OFF COMMAND\n");
522 rc = power_off(slot_cur);
523 if (rc)
524 return rc;
525
526 /* retval = slot_update(&slot_cur);
527 * if (retval)
528 * return retval;
529 * ibmphp_update_slot_info(slot_cur);
530 */
531 }
532 }
533 init_flag = 0;
534 return 0;
535}
536
537/* This operation will check whether the slot is within the bounds and
538 * the operation is valid to perform on that slot
539 * Parameters: slot, operation
540 * Returns: 0 or error codes
541 */
542static int validate(struct slot *slot_cur, int opn)
543{
544 int number;
545 int retval;
546
547 if (!slot_cur)
548 return -ENODEV;
549 number = slot_cur->number;
550 if ((number > max_slots) || (number < 0))
551 return -EBADSLT;
552 debug("slot_number in validate is %d\n", slot_cur->number);
553
554 retval = slot_update(&slot_cur);
555 if (retval)
556 return retval;
557
558 switch (opn) {
559 case ENABLE:
560 if (!(SLOT_PWRGD(slot_cur->status)) &&
561 (SLOT_PRESENT(slot_cur->status)) &&
562 !(SLOT_LATCH(slot_cur->status)))
563 return 0;
564 break;
565 case DISABLE:
566 if ((SLOT_PWRGD(slot_cur->status)) &&
567 (SLOT_PRESENT(slot_cur->status)) &&
568 !(SLOT_LATCH(slot_cur->status)))
569 return 0;
570 break;
571 default:
572 break;
573 }
574 err("validate failed....\n");
575 return -EINVAL;
576}
577
578/****************************************************************************
579 * This routine is for updating the data structures in the hotplug core
580 * Parameters: struct slot
581 * Returns: 0 or error
582 ****************************************************************************/
583int ibmphp_update_slot_info(struct slot *slot_cur)
584{
585 struct hotplug_slot_info *info;
586 struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
587 int rc;
588 u8 bus_speed;
589 u8 mode;
590
591 info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
592 if (!info)
593 return -ENOMEM;
594
595 info->power_status = SLOT_PWRGD(slot_cur->status);
596 info->attention_status = SLOT_ATTN(slot_cur->status,
597 slot_cur->ext_status);
598 info->latch_status = SLOT_LATCH(slot_cur->status);
599 if (!SLOT_PRESENT(slot_cur->status)) {
600 info->adapter_status = 0;
601/* info->max_adapter_speed_status = MAX_ADAPTER_NONE; */
602 } else {
603 info->adapter_status = 1;
604/* get_max_adapter_speed_1(slot_cur->hotplug_slot,
605 &info->max_adapter_speed_status, 0); */
606 }
607
608 bus_speed = slot_cur->bus_on->current_speed;
609 mode = slot_cur->bus_on->current_bus_mode;
610
611 switch (bus_speed) {
612 case BUS_SPEED_33:
613 break;
614 case BUS_SPEED_66:
615 if (mode == BUS_MODE_PCIX)
616 bus_speed += 0x01;
617 else if (mode == BUS_MODE_PCI)
618 ;
619 else
620 bus_speed = PCI_SPEED_UNKNOWN;
621 break;
622 case BUS_SPEED_100:
623 case BUS_SPEED_133:
624 bus_speed += 0x01;
625 break;
626 default:
627 bus_speed = PCI_SPEED_UNKNOWN;
628 }
629
630 bus->cur_bus_speed = bus_speed;
631 // To do: bus_names
632
633 rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
634 kfree(info);
635 return rc;
636}
637
638
639/******************************************************************************
640 * This function will return the pci_func, given bus and devfunc, or NULL. It
641 * is called from visit routines
642 ******************************************************************************/
643
644static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function)
645{
646 struct pci_func *func_cur;
647 struct slot *slot_cur;
648 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
649 if (slot_cur->func) {
650 func_cur = slot_cur->func;
651 while (func_cur) {
652 if ((func_cur->busno == busno) &&
653 (func_cur->device == device) &&
654 (func_cur->function == function))
655 return func_cur;
656 func_cur = func_cur->next;
657 }
658 }
659 }
660 return NULL;
661}
662
663/*************************************************************
664 * This routine frees up memory used by struct slot, including
665 * the pointers to pci_func, bus, hotplug_slot, controller,
666 * and deregistering from the hotplug core
667 *************************************************************/
668static void free_slots(void)
669{
670 struct slot *slot_cur, *next;
671
672 debug("%s -- enter\n", __func__);
673
674 list_for_each_entry_safe(slot_cur, next, &ibmphp_slot_head,
675 ibm_slot_list) {
676 pci_hp_deregister(slot_cur->hotplug_slot);
677 }
678 debug("%s -- exit\n", __func__);
679}
680
681static void ibm_unconfigure_device(struct pci_func *func)
682{
683 struct pci_dev *temp;
684 u8 j;
685
686 debug("inside %s\n", __func__);
687 debug("func->device = %x, func->function = %x\n",
688 func->device, func->function);
689 debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0);
690
691 pci_lock_rescan_remove();
692
693 for (j = 0; j < 0x08; j++) {
694 temp = pci_get_domain_bus_and_slot(0, func->busno,
695 (func->device << 3) | j);
696 if (temp) {
697 pci_stop_and_remove_bus_device(temp);
698 pci_dev_put(temp);
699 }
700 }
701
702 pci_dev_put(func->dev);
703
704 pci_unlock_rescan_remove();
705}
706
707/*
708 * The following function is to fix kernel bug regarding
709 * getting bus entries, here we manually add those primary
710 * bus entries to kernel bus structure whenever apply
711 */
712static u8 bus_structure_fixup(u8 busno)
713{
714 struct pci_bus *bus, *b;
715 struct pci_dev *dev;
716 u16 l;
717
718 if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno)))
719 return 1;
720
721 bus = kmalloc(sizeof(*bus), GFP_KERNEL);
722 if (!bus)
723 return 1;
724
725 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
726 if (!dev) {
727 kfree(bus);
728 return 1;
729 }
730
731 bus->number = busno;
732 bus->ops = ibmphp_pci_bus->ops;
733 dev->bus = bus;
734 for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) {
735 if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) &&
736 (l != 0x0000) && (l != 0xffff)) {
737 debug("%s - Inside bus_structure_fixup()\n",
738 __func__);
739 b = pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL);
740 if (!b)
741 continue;
742
743 pci_bus_add_devices(b);
744 break;
745 }
746 }
747
748 kfree(dev);
749 kfree(bus);
750
751 return 0;
752}
753
754static int ibm_configure_device(struct pci_func *func)
755{
756 struct pci_bus *child;
757 int num;
758 int flag = 0; /* this is to make sure we don't double scan the bus,
759 for bridged devices primarily */
760
761 pci_lock_rescan_remove();
762
763 if (!(bus_structure_fixup(func->busno)))
764 flag = 1;
765 if (func->dev == NULL)
766 func->dev = pci_get_domain_bus_and_slot(0, func->busno,
767 PCI_DEVFN(func->device, func->function));
768
769 if (func->dev == NULL) {
770 struct pci_bus *bus = pci_find_bus(0, func->busno);
771 if (!bus)
772 goto out;
773
774 num = pci_scan_slot(bus,
775 PCI_DEVFN(func->device, func->function));
776 if (num)
777 pci_bus_add_devices(bus);
778
779 func->dev = pci_get_domain_bus_and_slot(0, func->busno,
780 PCI_DEVFN(func->device, func->function));
781 if (func->dev == NULL) {
782 err("ERROR... : pci_dev still NULL\n");
783 goto out;
784 }
785 }
786 if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
787 pci_hp_add_bridge(func->dev);
788 child = func->dev->subordinate;
789 if (child)
790 pci_bus_add_devices(child);
791 }
792
793 out:
794 pci_unlock_rescan_remove();
795 return 0;
796}
797
798/*******************************************************
799 * Returns whether the bus is empty or not
800 *******************************************************/
801static int is_bus_empty(struct slot *slot_cur)
802{
803 int rc;
804 struct slot *tmp_slot;
805 u8 i = slot_cur->bus_on->slot_min;
806
807 while (i <= slot_cur->bus_on->slot_max) {
808 if (i == slot_cur->number) {
809 i++;
810 continue;
811 }
812 tmp_slot = ibmphp_get_slot_from_physical_num(i);
813 if (!tmp_slot)
814 return 0;
815 rc = slot_update(&tmp_slot);
816 if (rc)
817 return 0;
818 if (SLOT_PRESENT(tmp_slot->status) &&
819 SLOT_PWRGD(tmp_slot->status))
820 return 0;
821 i++;
822 }
823 return 1;
824}
825
826/***********************************************************
827 * If the HPC permits and the bus currently empty, tries to set the
828 * bus speed and mode at the maximum card and bus capability
829 * Parameters: slot
830 * Returns: bus is set (0) or error code
831 ***********************************************************/
832static int set_bus(struct slot *slot_cur)
833{
834 int rc;
835 u8 speed;
836 u8 cmd = 0x0;
837 int retval;
838 static const struct pci_device_id ciobx[] = {
839 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
840 { },
841 };
842
843 debug("%s - entry slot # %d\n", __func__, slot_cur->number);
844 if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
845 rc = slot_update(&slot_cur);
846 if (rc)
847 return rc;
848 speed = SLOT_SPEED(slot_cur->ext_status);
849 debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed);
850 switch (speed) {
851 case HPC_SLOT_SPEED_33:
852 cmd = HPC_BUS_33CONVMODE;
853 break;
854 case HPC_SLOT_SPEED_66:
855 if (SLOT_PCIX(slot_cur->ext_status)) {
856 if ((slot_cur->supported_speed >= BUS_SPEED_66) &&
857 (slot_cur->supported_bus_mode == BUS_MODE_PCIX))
858 cmd = HPC_BUS_66PCIXMODE;
859 else if (!SLOT_BUS_MODE(slot_cur->ext_status))
860 /* if max slot/bus capability is 66 pci
861 and there's no bus mode mismatch, then
862 the adapter supports 66 pci */
863 cmd = HPC_BUS_66CONVMODE;
864 else
865 cmd = HPC_BUS_33CONVMODE;
866 } else {
867 if (slot_cur->supported_speed >= BUS_SPEED_66)
868 cmd = HPC_BUS_66CONVMODE;
869 else
870 cmd = HPC_BUS_33CONVMODE;
871 }
872 break;
873 case HPC_SLOT_SPEED_133:
874 switch (slot_cur->supported_speed) {
875 case BUS_SPEED_33:
876 cmd = HPC_BUS_33CONVMODE;
877 break;
878 case BUS_SPEED_66:
879 if (slot_cur->supported_bus_mode == BUS_MODE_PCIX)
880 cmd = HPC_BUS_66PCIXMODE;
881 else
882 cmd = HPC_BUS_66CONVMODE;
883 break;
884 case BUS_SPEED_100:
885 cmd = HPC_BUS_100PCIXMODE;
886 break;
887 case BUS_SPEED_133:
888 /* This is to take care of the bug in CIOBX chip */
889 if (pci_dev_present(ciobx))
890 ibmphp_hpc_writeslot(slot_cur,
891 HPC_BUS_100PCIXMODE);
892 cmd = HPC_BUS_133PCIXMODE;
893 break;
894 default:
895 err("Wrong bus speed\n");
896 return -ENODEV;
897 }
898 break;
899 default:
900 err("wrong slot speed\n");
901 return -ENODEV;
902 }
903 debug("setting bus speed for slot %d, cmd %x\n",
904 slot_cur->number, cmd);
905 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
906 if (retval) {
907 err("setting bus speed failed\n");
908 return retval;
909 }
910 if (CTLR_RESULT(slot_cur->ctrl->status)) {
911 err("command not completed successfully in set_bus\n");
912 return -EIO;
913 }
914 }
915 /* This is for x440, once Brandon fixes the firmware,
916 will not need this delay */
917 msleep(1000);
918 debug("%s -Exit\n", __func__);
919 return 0;
920}
921
922/* This routine checks the bus limitations that the slot is on from the BIOS.
923 * This is used in deciding whether or not to power up the slot.
924 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
925 * same bus)
926 * Parameters: slot
927 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
928 */
929static int check_limitations(struct slot *slot_cur)
930{
931 u8 i;
932 struct slot *tmp_slot;
933 u8 count = 0;
934 u8 limitation = 0;
935
936 for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
937 tmp_slot = ibmphp_get_slot_from_physical_num(i);
938 if (!tmp_slot)
939 return -ENODEV;
940 if ((SLOT_PWRGD(tmp_slot->status)) &&
941 !(SLOT_CONNECT(tmp_slot->status)))
942 count++;
943 }
944 get_cur_bus_info(&slot_cur);
945 switch (slot_cur->bus_on->current_speed) {
946 case BUS_SPEED_33:
947 limitation = slot_cur->bus_on->slots_at_33_conv;
948 break;
949 case BUS_SPEED_66:
950 if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
951 limitation = slot_cur->bus_on->slots_at_66_pcix;
952 else
953 limitation = slot_cur->bus_on->slots_at_66_conv;
954 break;
955 case BUS_SPEED_100:
956 limitation = slot_cur->bus_on->slots_at_100_pcix;
957 break;
958 case BUS_SPEED_133:
959 limitation = slot_cur->bus_on->slots_at_133_pcix;
960 break;
961 }
962
963 if ((count + 1) > limitation)
964 return -EINVAL;
965 return 0;
966}
967
968static inline void print_card_capability(struct slot *slot_cur)
969{
970 info("capability of the card is ");
971 if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
972 info(" 133 MHz PCI-X\n");
973 else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
974 info(" 66 MHz PCI-X\n");
975 else if ((slot_cur->ext_status & CARD_INFO) == PCI66)
976 info(" 66 MHz PCI\n");
977 else
978 info(" 33 MHz PCI\n");
979
980}
981
982/* This routine will power on the slot, configure the device(s) and find the
983 * drivers for them.
984 * Parameters: hotplug_slot
985 * Returns: 0 or failure codes
986 */
987static int enable_slot(struct hotplug_slot *hs)
988{
989 int rc, i, rcpr;
990 struct slot *slot_cur;
991 u8 function;
992 struct pci_func *tmp_func;
993
994 ibmphp_lock_operations();
995
996 debug("ENABLING SLOT........\n");
997 slot_cur = hs->private;
998
999 rc = validate(slot_cur, ENABLE);
1000 if (rc) {
1001 err("validate function failed\n");
1002 goto error_nopower;
1003 }
1004
1005 attn_LED_blink(slot_cur);
1006
1007 rc = set_bus(slot_cur);
1008 if (rc) {
1009 err("was not able to set the bus\n");
1010 goto error_nopower;
1011 }
1012
1013 /*-----------------debugging------------------------------*/
1014 get_cur_bus_info(&slot_cur);
1015 debug("the current bus speed right after set_bus = %x\n",
1016 slot_cur->bus_on->current_speed);
1017 /*----------------------------------------------------------*/
1018
1019 rc = check_limitations(slot_cur);
1020 if (rc) {
1021 err("Adding this card exceeds the limitations of this bus.\n");
1022 err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n");
1023 err("Try hot-adding into another bus\n");
1024 rc = -EINVAL;
1025 goto error_nopower;
1026 }
1027
1028 rc = power_on(slot_cur);
1029
1030 if (rc) {
1031 err("something wrong when powering up... please see below for details\n");
1032 /* need to turn off before on, otherwise, blinking overwrites */
1033 attn_off(slot_cur);
1034 attn_on(slot_cur);
1035 if (slot_update(&slot_cur)) {
1036 attn_off(slot_cur);
1037 attn_on(slot_cur);
1038 rc = -ENODEV;
1039 goto exit;
1040 }
1041 /* Check to see the error of why it failed */
1042 if ((SLOT_POWER(slot_cur->status)) &&
1043 !(SLOT_PWRGD(slot_cur->status)))
1044 err("power fault occurred trying to power up\n");
1045 else if (SLOT_BUS_SPEED(slot_cur->status)) {
1046 err("bus speed mismatch occurred. please check current bus speed and card capability\n");
1047 print_card_capability(slot_cur);
1048 } else if (SLOT_BUS_MODE(slot_cur->ext_status)) {
1049 err("bus mode mismatch occurred. please check current bus mode and card capability\n");
1050 print_card_capability(slot_cur);
1051 }
1052 ibmphp_update_slot_info(slot_cur);
1053 goto exit;
1054 }
1055 debug("after power_on\n");
1056 /*-----------------------debugging---------------------------*/
1057 get_cur_bus_info(&slot_cur);
1058 debug("the current bus speed right after power_on = %x\n",
1059 slot_cur->bus_on->current_speed);
1060 /*----------------------------------------------------------*/
1061
1062 rc = slot_update(&slot_cur);
1063 if (rc)
1064 goto error_power;
1065
1066 rc = -EINVAL;
1067 if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
1068 err("power fault occurred trying to power up...\n");
1069 goto error_power;
1070 }
1071 if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) {
1072 err("bus speed mismatch occurred. please check current bus speed and card capability\n");
1073 print_card_capability(slot_cur);
1074 goto error_power;
1075 }
1076 /* Don't think this case will happen after above checks...
1077 * but just in case, for paranoia sake */
1078 if (!(SLOT_POWER(slot_cur->status))) {
1079 err("power on failed...\n");
1080 goto error_power;
1081 }
1082
1083 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1084 if (!slot_cur->func) {
1085 /* We cannot do update_slot_info here, since no memory for
1086 * kmalloc n.e.ways, and update_slot_info allocates some */
1087 rc = -ENOMEM;
1088 goto error_power;
1089 }
1090 slot_cur->func->busno = slot_cur->bus;
1091 slot_cur->func->device = slot_cur->device;
1092 for (i = 0; i < 4; i++)
1093 slot_cur->func->irq[i] = slot_cur->irq[i];
1094
1095 debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n",
1096 slot_cur->bus, slot_cur->device);
1097
1098 if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) {
1099 err("configure_card was unsuccessful...\n");
1100 /* true because don't need to actually deallocate resources,
1101 * just remove references */
1102 ibmphp_unconfigure_card(&slot_cur, 1);
1103 debug("after unconfigure_card\n");
1104 slot_cur->func = NULL;
1105 rc = -ENOMEM;
1106 goto error_power;
1107 }
1108
1109 function = 0x00;
1110 do {
1111 tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device,
1112 function++);
1113 if (tmp_func && !(tmp_func->dev))
1114 ibm_configure_device(tmp_func);
1115 } while (tmp_func);
1116
1117 attn_off(slot_cur);
1118 if (slot_update(&slot_cur)) {
1119 rc = -EFAULT;
1120 goto exit;
1121 }
1122 ibmphp_print_test();
1123 rc = ibmphp_update_slot_info(slot_cur);
1124exit:
1125 ibmphp_unlock_operations();
1126 return rc;
1127
1128error_nopower:
1129 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1130 attn_on(slot_cur);
1131error_cont:
1132 rcpr = slot_update(&slot_cur);
1133 if (rcpr) {
1134 rc = rcpr;
1135 goto exit;
1136 }
1137 ibmphp_update_slot_info(slot_cur);
1138 goto exit;
1139
1140error_power:
1141 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1142 attn_on(slot_cur);
1143 rcpr = power_off(slot_cur);
1144 if (rcpr) {
1145 rc = rcpr;
1146 goto exit;
1147 }
1148 goto error_cont;
1149}
1150
1151/**************************************************************
1152* HOT REMOVING ADAPTER CARD *
1153* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE *
1154* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE *
1155* DISABLE POWER , *
1156**************************************************************/
1157static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot)
1158{
1159 struct slot *slot = hotplug_slot->private;
1160 int rc;
1161
1162 ibmphp_lock_operations();
1163 rc = ibmphp_do_disable_slot(slot);
1164 ibmphp_unlock_operations();
1165 return rc;
1166}
1167
1168int ibmphp_do_disable_slot(struct slot *slot_cur)
1169{
1170 int rc;
1171 u8 flag;
1172
1173 debug("DISABLING SLOT...\n");
1174
1175 if ((slot_cur == NULL) || (slot_cur->ctrl == NULL))
1176 return -ENODEV;
1177
1178 flag = slot_cur->flag;
1179 slot_cur->flag = 1;
1180
1181 if (flag == 1) {
1182 rc = validate(slot_cur, DISABLE);
1183 /* checking if powered off already & valid slot # */
1184 if (rc)
1185 goto error;
1186 }
1187 attn_LED_blink(slot_cur);
1188
1189 if (slot_cur->func == NULL) {
1190 /* We need this for functions that were there on bootup */
1191 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1192 if (!slot_cur->func) {
1193 rc = -ENOMEM;
1194 goto error;
1195 }
1196 slot_cur->func->busno = slot_cur->bus;
1197 slot_cur->func->device = slot_cur->device;
1198 }
1199
1200 ibm_unconfigure_device(slot_cur->func);
1201
1202 /*
1203 * If we got here from latch suddenly opening on operating card or
1204 * a power fault, there's no power to the card, so cannot
1205 * read from it to determine what resources it occupied. This operation
1206 * is forbidden anyhow. The best we can do is remove it from kernel
1207 * lists at least */
1208
1209 if (!flag) {
1210 attn_off(slot_cur);
1211 return 0;
1212 }
1213
1214 rc = ibmphp_unconfigure_card(&slot_cur, 0);
1215 slot_cur->func = NULL;
1216 debug("in disable_slot. after unconfigure_card\n");
1217 if (rc) {
1218 err("could not unconfigure card.\n");
1219 goto error;
1220 }
1221
1222 rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF);
1223 if (rc)
1224 goto error;
1225
1226 attn_off(slot_cur);
1227 rc = slot_update(&slot_cur);
1228 if (rc)
1229 goto exit;
1230
1231 rc = ibmphp_update_slot_info(slot_cur);
1232 ibmphp_print_test();
1233exit:
1234 return rc;
1235
1236error:
1237 /* Need to turn off if was blinking b4 */
1238 attn_off(slot_cur);
1239 attn_on(slot_cur);
1240 if (slot_update(&slot_cur)) {
1241 rc = -EFAULT;
1242 goto exit;
1243 }
1244 if (flag)
1245 ibmphp_update_slot_info(slot_cur);
1246 goto exit;
1247}
1248
1249struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
1250 .set_attention_status = set_attention_status,
1251 .enable_slot = enable_slot,
1252 .disable_slot = ibmphp_disable_slot,
1253 .hardware_test = NULL,
1254 .get_power_status = get_power_status,
1255 .get_attention_status = get_attention_status,
1256 .get_latch_status = get_latch_status,
1257 .get_adapter_status = get_adapter_present,
1258/* .get_max_adapter_speed = get_max_adapter_speed,
1259 .get_bus_name_status = get_bus_name,
1260*/
1261};
1262
1263static void ibmphp_unload(void)
1264{
1265 free_slots();
1266 debug("after slots\n");
1267 ibmphp_free_resources();
1268 debug("after resources\n");
1269 ibmphp_free_bus_info_queue();
1270 debug("after bus info\n");
1271 ibmphp_free_ebda_hpc_queue();
1272 debug("after ebda hpc\n");
1273 ibmphp_free_ebda_pci_rsrc_queue();
1274 debug("after ebda pci rsrc\n");
1275 kfree(ibmphp_pci_bus);
1276}
1277
1278static int __init ibmphp_init(void)
1279{
1280 struct pci_bus *bus;
1281 int i = 0;
1282 int rc = 0;
1283
1284 init_flag = 1;
1285
1286 info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
1287
1288 ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL);
1289 if (!ibmphp_pci_bus) {
1290 rc = -ENOMEM;
1291 goto exit;
1292 }
1293
1294 bus = pci_find_bus(0, 0);
1295 if (!bus) {
1296 err("Can't find the root pci bus, can not continue\n");
1297 rc = -ENODEV;
1298 goto error;
1299 }
1300 memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus));
1301
1302 ibmphp_debug = debug;
1303
1304 ibmphp_hpc_initvars();
1305
1306 for (i = 0; i < 16; i++)
1307 irqs[i] = 0;
1308
1309 rc = ibmphp_access_ebda();
1310 if (rc)
1311 goto error;
1312 debug("after ibmphp_access_ebda()\n");
1313
1314 rc = ibmphp_rsrc_init();
1315 if (rc)
1316 goto error;
1317 debug("AFTER Resource & EBDA INITIALIZATIONS\n");
1318
1319 max_slots = get_max_slots();
1320
1321 rc = ibmphp_register_pci();
1322 if (rc)
1323 goto error;
1324
1325 if (init_ops()) {
1326 rc = -ENODEV;
1327 goto error;
1328 }
1329
1330 ibmphp_print_test();
1331 rc = ibmphp_hpc_start_poll_thread();
1332 if (rc)
1333 goto error;
1334
1335exit:
1336 return rc;
1337
1338error:
1339 ibmphp_unload();
1340 goto exit;
1341}
1342
1343static void __exit ibmphp_exit(void)
1344{
1345 ibmphp_hpc_stop_poll_thread();
1346 debug("after polling\n");
1347 ibmphp_unload();
1348 debug("done\n");
1349}
1350
1351module_init(ibmphp_init);
1352module_exit(ibmphp_exit);
1/*
2 * IBM Hot Plug Controller Driver
3 *
4 * Written By: Chuck Cole, Jyoti Shah, Tong Yu, Irene Zubarev, IBM Corporation
5 *
6 * Copyright (C) 2001,2003 Greg Kroah-Hartman (greg@kroah.com)
7 * Copyright (C) 2001-2003 IBM Corp.
8 *
9 * All rights reserved.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License as published by
13 * the Free Software Foundation; either version 2 of the License, or (at
14 * your option) any later version.
15 *
16 * This program is distributed in the hope that it will be useful, but
17 * WITHOUT ANY WARRANTY; without even the implied warranty of
18 * MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, GOOD TITLE or
19 * NON INFRINGEMENT. See the GNU General Public License for more
20 * details.
21 *
22 * You should have received a copy of the GNU General Public License
23 * along with this program; if not, write to the Free Software
24 * Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
25 *
26 * Send feedback to <gregkh@us.ibm.com>
27 *
28 */
29
30#include <linux/init.h>
31#include <linux/module.h>
32#include <linux/slab.h>
33#include <linux/pci.h>
34#include <linux/interrupt.h>
35#include <linux/delay.h>
36#include <linux/wait.h>
37#include "../pci.h"
38#include <asm/pci_x86.h> /* for struct irq_routing_table */
39#include <asm/io_apic.h>
40#include "ibmphp.h"
41
42#define attn_on(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNON)
43#define attn_off(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_ATTNOFF)
44#define attn_LED_blink(sl) ibmphp_hpc_writeslot(sl, HPC_SLOT_BLINKLED)
45#define get_ctrl_revision(sl, rev) ibmphp_hpc_readslot(sl, READ_REVLEVEL, rev)
46#define get_hpc_options(sl, opt) ibmphp_hpc_readslot(sl, READ_HPCOPTIONS, opt)
47
48#define DRIVER_VERSION "0.6"
49#define DRIVER_DESC "IBM Hot Plug PCI Controller Driver"
50
51int ibmphp_debug;
52
53static bool debug;
54module_param(debug, bool, S_IRUGO | S_IWUSR);
55MODULE_PARM_DESC(debug, "Debugging mode enabled or not");
56MODULE_LICENSE("GPL");
57MODULE_DESCRIPTION(DRIVER_DESC);
58
59struct pci_bus *ibmphp_pci_bus;
60static int max_slots;
61
62static int irqs[16]; /* PIC mode IRQs we're using so far (in case MPS
63 * tables don't provide default info for empty slots */
64
65static int init_flag;
66
67/*
68static int get_max_adapter_speed_1 (struct hotplug_slot *, u8 *, u8);
69
70static inline int get_max_adapter_speed (struct hotplug_slot *hs, u8 *value)
71{
72 return get_max_adapter_speed_1 (hs, value, 1);
73}
74*/
75static inline int get_cur_bus_info(struct slot **sl)
76{
77 int rc = 1;
78 struct slot *slot_cur = *sl;
79
80 debug("options = %x\n", slot_cur->ctrl->options);
81 debug("revision = %x\n", slot_cur->ctrl->revision);
82
83 if (READ_BUS_STATUS(slot_cur->ctrl))
84 rc = ibmphp_hpc_readslot(slot_cur, READ_BUSSTATUS, NULL);
85
86 if (rc)
87 return rc;
88
89 slot_cur->bus_on->current_speed = CURRENT_BUS_SPEED(slot_cur->busstatus);
90 if (READ_BUS_MODE(slot_cur->ctrl))
91 slot_cur->bus_on->current_bus_mode =
92 CURRENT_BUS_MODE(slot_cur->busstatus);
93 else
94 slot_cur->bus_on->current_bus_mode = 0xFF;
95
96 debug("busstatus = %x, bus_speed = %x, bus_mode = %x\n",
97 slot_cur->busstatus,
98 slot_cur->bus_on->current_speed,
99 slot_cur->bus_on->current_bus_mode);
100
101 *sl = slot_cur;
102 return 0;
103}
104
105static inline int slot_update(struct slot **sl)
106{
107 int rc;
108 rc = ibmphp_hpc_readslot(*sl, READ_ALLSTAT, NULL);
109 if (rc)
110 return rc;
111 if (!init_flag)
112 rc = get_cur_bus_info(sl);
113 return rc;
114}
115
116static int __init get_max_slots(void)
117{
118 struct slot *slot_cur;
119 u8 slot_count = 0;
120
121 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
122 /* sometimes the hot-pluggable slots start with 4 (not always from 1) */
123 slot_count = max(slot_count, slot_cur->number);
124 }
125 return slot_count;
126}
127
128/* This routine will put the correct slot->device information per slot. It's
129 * called from initialization of the slot structures. It will also assign
130 * interrupt numbers per each slot.
131 * Parameters: struct slot
132 * Returns 0 or errors
133 */
134int ibmphp_init_devno(struct slot **cur_slot)
135{
136 struct irq_routing_table *rtable;
137 int len;
138 int loop;
139 int i;
140
141 rtable = pcibios_get_irq_routing_table();
142 if (!rtable) {
143 err("no BIOS routing table...\n");
144 return -ENOMEM;
145 }
146
147 len = (rtable->size - sizeof(struct irq_routing_table)) /
148 sizeof(struct irq_info);
149
150 if (!len) {
151 kfree(rtable);
152 return -1;
153 }
154 for (loop = 0; loop < len; loop++) {
155 if ((*cur_slot)->number == rtable->slots[loop].slot &&
156 (*cur_slot)->bus == rtable->slots[loop].bus) {
157 (*cur_slot)->device = PCI_SLOT(rtable->slots[loop].devfn);
158 for (i = 0; i < 4; i++)
159 (*cur_slot)->irq[i] = IO_APIC_get_PCI_irq_vector((int) (*cur_slot)->bus,
160 (int) (*cur_slot)->device, i);
161
162 debug("(*cur_slot)->irq[0] = %x\n",
163 (*cur_slot)->irq[0]);
164 debug("(*cur_slot)->irq[1] = %x\n",
165 (*cur_slot)->irq[1]);
166 debug("(*cur_slot)->irq[2] = %x\n",
167 (*cur_slot)->irq[2]);
168 debug("(*cur_slot)->irq[3] = %x\n",
169 (*cur_slot)->irq[3]);
170
171 debug("rtable->exclusive_irqs = %x\n",
172 rtable->exclusive_irqs);
173 debug("rtable->slots[loop].irq[0].bitmap = %x\n",
174 rtable->slots[loop].irq[0].bitmap);
175 debug("rtable->slots[loop].irq[1].bitmap = %x\n",
176 rtable->slots[loop].irq[1].bitmap);
177 debug("rtable->slots[loop].irq[2].bitmap = %x\n",
178 rtable->slots[loop].irq[2].bitmap);
179 debug("rtable->slots[loop].irq[3].bitmap = %x\n",
180 rtable->slots[loop].irq[3].bitmap);
181
182 debug("rtable->slots[loop].irq[0].link = %x\n",
183 rtable->slots[loop].irq[0].link);
184 debug("rtable->slots[loop].irq[1].link = %x\n",
185 rtable->slots[loop].irq[1].link);
186 debug("rtable->slots[loop].irq[2].link = %x\n",
187 rtable->slots[loop].irq[2].link);
188 debug("rtable->slots[loop].irq[3].link = %x\n",
189 rtable->slots[loop].irq[3].link);
190 debug("end of init_devno\n");
191 kfree(rtable);
192 return 0;
193 }
194 }
195
196 kfree(rtable);
197 return -1;
198}
199
200static inline int power_on(struct slot *slot_cur)
201{
202 u8 cmd = HPC_SLOT_ON;
203 int retval;
204
205 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
206 if (retval) {
207 err("power on failed\n");
208 return retval;
209 }
210 if (CTLR_RESULT(slot_cur->ctrl->status)) {
211 err("command not completed successfully in power_on\n");
212 return -EIO;
213 }
214 msleep(3000); /* For ServeRAID cards, and some 66 PCI */
215 return 0;
216}
217
218static inline int power_off(struct slot *slot_cur)
219{
220 u8 cmd = HPC_SLOT_OFF;
221 int retval;
222
223 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
224 if (retval) {
225 err("power off failed\n");
226 return retval;
227 }
228 if (CTLR_RESULT(slot_cur->ctrl->status)) {
229 err("command not completed successfully in power_off\n");
230 retval = -EIO;
231 }
232 return retval;
233}
234
235static int set_attention_status(struct hotplug_slot *hotplug_slot, u8 value)
236{
237 int rc = 0;
238 struct slot *pslot;
239 u8 cmd = 0x00; /* avoid compiler warning */
240
241 debug("set_attention_status - Entry hotplug_slot[%lx] value[%x]\n",
242 (ulong) hotplug_slot, value);
243 ibmphp_lock_operations();
244
245
246 if (hotplug_slot) {
247 switch (value) {
248 case HPC_SLOT_ATTN_OFF:
249 cmd = HPC_SLOT_ATTNOFF;
250 break;
251 case HPC_SLOT_ATTN_ON:
252 cmd = HPC_SLOT_ATTNON;
253 break;
254 case HPC_SLOT_ATTN_BLINK:
255 cmd = HPC_SLOT_BLINKLED;
256 break;
257 default:
258 rc = -ENODEV;
259 err("set_attention_status - Error : invalid input [%x]\n",
260 value);
261 break;
262 }
263 if (rc == 0) {
264 pslot = hotplug_slot->private;
265 if (pslot)
266 rc = ibmphp_hpc_writeslot(pslot, cmd);
267 else
268 rc = -ENODEV;
269 }
270 } else
271 rc = -ENODEV;
272
273 ibmphp_unlock_operations();
274
275 debug("set_attention_status - Exit rc[%d]\n", rc);
276 return rc;
277}
278
279static int get_attention_status(struct hotplug_slot *hotplug_slot, u8 *value)
280{
281 int rc = -ENODEV;
282 struct slot *pslot;
283 struct slot myslot;
284
285 debug("get_attention_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
286 (ulong) hotplug_slot, (ulong) value);
287
288 ibmphp_lock_operations();
289 if (hotplug_slot) {
290 pslot = hotplug_slot->private;
291 if (pslot) {
292 memcpy(&myslot, pslot, sizeof(struct slot));
293 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
294 &(myslot.status));
295 if (!rc)
296 rc = ibmphp_hpc_readslot(pslot,
297 READ_EXTSLOTSTATUS,
298 &(myslot.ext_status));
299 if (!rc)
300 *value = SLOT_ATTN(myslot.status,
301 myslot.ext_status);
302 }
303 }
304
305 ibmphp_unlock_operations();
306 debug("get_attention_status - Exit rc[%d] value[%x]\n", rc, *value);
307 return rc;
308}
309
310static int get_latch_status(struct hotplug_slot *hotplug_slot, u8 *value)
311{
312 int rc = -ENODEV;
313 struct slot *pslot;
314 struct slot myslot;
315
316 debug("get_latch_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
317 (ulong) hotplug_slot, (ulong) value);
318 ibmphp_lock_operations();
319 if (hotplug_slot) {
320 pslot = hotplug_slot->private;
321 if (pslot) {
322 memcpy(&myslot, pslot, sizeof(struct slot));
323 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
324 &(myslot.status));
325 if (!rc)
326 *value = SLOT_LATCH(myslot.status);
327 }
328 }
329
330 ibmphp_unlock_operations();
331 debug("get_latch_status - Exit rc[%d] rc[%x] value[%x]\n",
332 rc, rc, *value);
333 return rc;
334}
335
336
337static int get_power_status(struct hotplug_slot *hotplug_slot, u8 *value)
338{
339 int rc = -ENODEV;
340 struct slot *pslot;
341 struct slot myslot;
342
343 debug("get_power_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
344 (ulong) hotplug_slot, (ulong) value);
345 ibmphp_lock_operations();
346 if (hotplug_slot) {
347 pslot = hotplug_slot->private;
348 if (pslot) {
349 memcpy(&myslot, pslot, sizeof(struct slot));
350 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
351 &(myslot.status));
352 if (!rc)
353 *value = SLOT_PWRGD(myslot.status);
354 }
355 }
356
357 ibmphp_unlock_operations();
358 debug("get_power_status - Exit rc[%d] rc[%x] value[%x]\n",
359 rc, rc, *value);
360 return rc;
361}
362
363static int get_adapter_present(struct hotplug_slot *hotplug_slot, u8 *value)
364{
365 int rc = -ENODEV;
366 struct slot *pslot;
367 u8 present;
368 struct slot myslot;
369
370 debug("get_adapter_status - Entry hotplug_slot[%lx] pvalue[%lx]\n",
371 (ulong) hotplug_slot, (ulong) value);
372 ibmphp_lock_operations();
373 if (hotplug_slot) {
374 pslot = hotplug_slot->private;
375 if (pslot) {
376 memcpy(&myslot, pslot, sizeof(struct slot));
377 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
378 &(myslot.status));
379 if (!rc) {
380 present = SLOT_PRESENT(myslot.status);
381 if (present == HPC_SLOT_EMPTY)
382 *value = 0;
383 else
384 *value = 1;
385 }
386 }
387 }
388
389 ibmphp_unlock_operations();
390 debug("get_adapter_present - Exit rc[%d] value[%x]\n", rc, *value);
391 return rc;
392}
393
394static int get_max_bus_speed(struct slot *slot)
395{
396 int rc;
397 u8 mode = 0;
398 enum pci_bus_speed speed;
399 struct pci_bus *bus = slot->hotplug_slot->pci_slot->bus;
400
401 debug("%s - Entry slot[%p]\n", __func__, slot);
402
403 ibmphp_lock_operations();
404 mode = slot->supported_bus_mode;
405 speed = slot->supported_speed;
406 ibmphp_unlock_operations();
407
408 switch (speed) {
409 case BUS_SPEED_33:
410 break;
411 case BUS_SPEED_66:
412 if (mode == BUS_MODE_PCIX)
413 speed += 0x01;
414 break;
415 case BUS_SPEED_100:
416 case BUS_SPEED_133:
417 speed += 0x01;
418 break;
419 default:
420 /* Note (will need to change): there would be soon 256, 512 also */
421 rc = -ENODEV;
422 }
423
424 if (!rc)
425 bus->max_bus_speed = speed;
426
427 debug("%s - Exit rc[%d] speed[%x]\n", __func__, rc, speed);
428 return rc;
429}
430
431/*
432static int get_max_adapter_speed_1(struct hotplug_slot *hotplug_slot, u8 *value, u8 flag)
433{
434 int rc = -ENODEV;
435 struct slot *pslot;
436 struct slot myslot;
437
438 debug("get_max_adapter_speed_1 - Entry hotplug_slot[%lx] pvalue[%lx]\n",
439 (ulong)hotplug_slot, (ulong) value);
440
441 if (flag)
442 ibmphp_lock_operations();
443
444 if (hotplug_slot && value) {
445 pslot = hotplug_slot->private;
446 if (pslot) {
447 memcpy(&myslot, pslot, sizeof(struct slot));
448 rc = ibmphp_hpc_readslot(pslot, READ_SLOTSTATUS,
449 &(myslot.status));
450
451 if (!(SLOT_LATCH (myslot.status)) &&
452 (SLOT_PRESENT (myslot.status))) {
453 rc = ibmphp_hpc_readslot(pslot,
454 READ_EXTSLOTSTATUS,
455 &(myslot.ext_status));
456 if (!rc)
457 *value = SLOT_SPEED(myslot.ext_status);
458 } else
459 *value = MAX_ADAPTER_NONE;
460 }
461 }
462
463 if (flag)
464 ibmphp_unlock_operations();
465
466 debug("get_max_adapter_speed_1 - Exit rc[%d] value[%x]\n", rc, *value);
467 return rc;
468}
469
470static int get_bus_name(struct hotplug_slot *hotplug_slot, char *value)
471{
472 int rc = -ENODEV;
473 struct slot *pslot = NULL;
474
475 debug("get_bus_name - Entry hotplug_slot[%lx]\n", (ulong)hotplug_slot);
476
477 ibmphp_lock_operations();
478
479 if (hotplug_slot) {
480 pslot = hotplug_slot->private;
481 if (pslot) {
482 rc = 0;
483 snprintf(value, 100, "Bus %x", pslot->bus);
484 }
485 } else
486 rc = -ENODEV;
487
488 ibmphp_unlock_operations();
489 debug("get_bus_name - Exit rc[%d] value[%x]\n", rc, *value);
490 return rc;
491}
492*/
493
494/****************************************************************************
495 * This routine will initialize the ops data structure used in the validate
496 * function. It will also power off empty slots that are powered on since BIOS
497 * leaves those on, albeit disconnected
498 ****************************************************************************/
499static int __init init_ops(void)
500{
501 struct slot *slot_cur;
502 int retval;
503 int rc;
504
505 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
506 debug("BEFORE GETTING SLOT STATUS, slot # %x\n",
507 slot_cur->number);
508 if (slot_cur->ctrl->revision == 0xFF)
509 if (get_ctrl_revision(slot_cur,
510 &slot_cur->ctrl->revision))
511 return -1;
512
513 if (slot_cur->bus_on->current_speed == 0xFF)
514 if (get_cur_bus_info(&slot_cur))
515 return -1;
516 get_max_bus_speed(slot_cur);
517
518 if (slot_cur->ctrl->options == 0xFF)
519 if (get_hpc_options(slot_cur, &slot_cur->ctrl->options))
520 return -1;
521
522 retval = slot_update(&slot_cur);
523 if (retval)
524 return retval;
525
526 debug("status = %x\n", slot_cur->status);
527 debug("ext_status = %x\n", slot_cur->ext_status);
528 debug("SLOT_POWER = %x\n", SLOT_POWER(slot_cur->status));
529 debug("SLOT_PRESENT = %x\n", SLOT_PRESENT(slot_cur->status));
530 debug("SLOT_LATCH = %x\n", SLOT_LATCH(slot_cur->status));
531
532 if ((SLOT_PWRGD(slot_cur->status)) &&
533 !(SLOT_PRESENT(slot_cur->status)) &&
534 !(SLOT_LATCH(slot_cur->status))) {
535 debug("BEFORE POWER OFF COMMAND\n");
536 rc = power_off(slot_cur);
537 if (rc)
538 return rc;
539
540 /* retval = slot_update(&slot_cur);
541 * if (retval)
542 * return retval;
543 * ibmphp_update_slot_info(slot_cur);
544 */
545 }
546 }
547 init_flag = 0;
548 return 0;
549}
550
551/* This operation will check whether the slot is within the bounds and
552 * the operation is valid to perform on that slot
553 * Parameters: slot, operation
554 * Returns: 0 or error codes
555 */
556static int validate(struct slot *slot_cur, int opn)
557{
558 int number;
559 int retval;
560
561 if (!slot_cur)
562 return -ENODEV;
563 number = slot_cur->number;
564 if ((number > max_slots) || (number < 0))
565 return -EBADSLT;
566 debug("slot_number in validate is %d\n", slot_cur->number);
567
568 retval = slot_update(&slot_cur);
569 if (retval)
570 return retval;
571
572 switch (opn) {
573 case ENABLE:
574 if (!(SLOT_PWRGD(slot_cur->status)) &&
575 (SLOT_PRESENT(slot_cur->status)) &&
576 !(SLOT_LATCH(slot_cur->status)))
577 return 0;
578 break;
579 case DISABLE:
580 if ((SLOT_PWRGD(slot_cur->status)) &&
581 (SLOT_PRESENT(slot_cur->status)) &&
582 !(SLOT_LATCH(slot_cur->status)))
583 return 0;
584 break;
585 default:
586 break;
587 }
588 err("validate failed....\n");
589 return -EINVAL;
590}
591
592/****************************************************************************
593 * This routine is for updating the data structures in the hotplug core
594 * Parameters: struct slot
595 * Returns: 0 or error
596 ****************************************************************************/
597int ibmphp_update_slot_info(struct slot *slot_cur)
598{
599 struct hotplug_slot_info *info;
600 struct pci_bus *bus = slot_cur->hotplug_slot->pci_slot->bus;
601 int rc;
602 u8 bus_speed;
603 u8 mode;
604
605 info = kmalloc(sizeof(struct hotplug_slot_info), GFP_KERNEL);
606 if (!info) {
607 err("out of system memory\n");
608 return -ENOMEM;
609 }
610
611 info->power_status = SLOT_PWRGD(slot_cur->status);
612 info->attention_status = SLOT_ATTN(slot_cur->status,
613 slot_cur->ext_status);
614 info->latch_status = SLOT_LATCH(slot_cur->status);
615 if (!SLOT_PRESENT(slot_cur->status)) {
616 info->adapter_status = 0;
617/* info->max_adapter_speed_status = MAX_ADAPTER_NONE; */
618 } else {
619 info->adapter_status = 1;
620/* get_max_adapter_speed_1(slot_cur->hotplug_slot,
621 &info->max_adapter_speed_status, 0); */
622 }
623
624 bus_speed = slot_cur->bus_on->current_speed;
625 mode = slot_cur->bus_on->current_bus_mode;
626
627 switch (bus_speed) {
628 case BUS_SPEED_33:
629 break;
630 case BUS_SPEED_66:
631 if (mode == BUS_MODE_PCIX)
632 bus_speed += 0x01;
633 else if (mode == BUS_MODE_PCI)
634 ;
635 else
636 bus_speed = PCI_SPEED_UNKNOWN;
637 break;
638 case BUS_SPEED_100:
639 case BUS_SPEED_133:
640 bus_speed += 0x01;
641 break;
642 default:
643 bus_speed = PCI_SPEED_UNKNOWN;
644 }
645
646 bus->cur_bus_speed = bus_speed;
647 // To do: bus_names
648
649 rc = pci_hp_change_slot_info(slot_cur->hotplug_slot, info);
650 kfree(info);
651 return rc;
652}
653
654
655/******************************************************************************
656 * This function will return the pci_func, given bus and devfunc, or NULL. It
657 * is called from visit routines
658 ******************************************************************************/
659
660static struct pci_func *ibm_slot_find(u8 busno, u8 device, u8 function)
661{
662 struct pci_func *func_cur;
663 struct slot *slot_cur;
664 list_for_each_entry(slot_cur, &ibmphp_slot_head, ibm_slot_list) {
665 if (slot_cur->func) {
666 func_cur = slot_cur->func;
667 while (func_cur) {
668 if ((func_cur->busno == busno) &&
669 (func_cur->device == device) &&
670 (func_cur->function == function))
671 return func_cur;
672 func_cur = func_cur->next;
673 }
674 }
675 }
676 return NULL;
677}
678
679/*************************************************************
680 * This routine frees up memory used by struct slot, including
681 * the pointers to pci_func, bus, hotplug_slot, controller,
682 * and deregistering from the hotplug core
683 *************************************************************/
684static void free_slots(void)
685{
686 struct slot *slot_cur, *next;
687
688 debug("%s -- enter\n", __func__);
689
690 list_for_each_entry_safe(slot_cur, next, &ibmphp_slot_head,
691 ibm_slot_list) {
692 pci_hp_deregister(slot_cur->hotplug_slot);
693 }
694 debug("%s -- exit\n", __func__);
695}
696
697static void ibm_unconfigure_device(struct pci_func *func)
698{
699 struct pci_dev *temp;
700 u8 j;
701
702 debug("inside %s\n", __func__);
703 debug("func->device = %x, func->function = %x\n",
704 func->device, func->function);
705 debug("func->device << 3 | 0x0 = %x\n", func->device << 3 | 0x0);
706
707 pci_lock_rescan_remove();
708
709 for (j = 0; j < 0x08; j++) {
710 temp = pci_get_bus_and_slot(func->busno, (func->device << 3) | j);
711 if (temp) {
712 pci_stop_and_remove_bus_device(temp);
713 pci_dev_put(temp);
714 }
715 }
716
717 pci_dev_put(func->dev);
718
719 pci_unlock_rescan_remove();
720}
721
722/*
723 * The following function is to fix kernel bug regarding
724 * getting bus entries, here we manually add those primary
725 * bus entries to kernel bus structure whenever apply
726 */
727static u8 bus_structure_fixup(u8 busno)
728{
729 struct pci_bus *bus, *b;
730 struct pci_dev *dev;
731 u16 l;
732
733 if (pci_find_bus(0, busno) || !(ibmphp_find_same_bus_num(busno)))
734 return 1;
735
736 bus = kmalloc(sizeof(*bus), GFP_KERNEL);
737 if (!bus) {
738 err("%s - out of memory\n", __func__);
739 return 1;
740 }
741 dev = kmalloc(sizeof(*dev), GFP_KERNEL);
742 if (!dev) {
743 kfree(bus);
744 err("%s - out of memory\n", __func__);
745 return 1;
746 }
747
748 bus->number = busno;
749 bus->ops = ibmphp_pci_bus->ops;
750 dev->bus = bus;
751 for (dev->devfn = 0; dev->devfn < 256; dev->devfn += 8) {
752 if (!pci_read_config_word(dev, PCI_VENDOR_ID, &l) &&
753 (l != 0x0000) && (l != 0xffff)) {
754 debug("%s - Inside bus_structure_fixup()\n",
755 __func__);
756 b = pci_scan_bus(busno, ibmphp_pci_bus->ops, NULL);
757 if (!b)
758 continue;
759
760 pci_bus_add_devices(b);
761 break;
762 }
763 }
764
765 kfree(dev);
766 kfree(bus);
767
768 return 0;
769}
770
771static int ibm_configure_device(struct pci_func *func)
772{
773 struct pci_bus *child;
774 int num;
775 int flag = 0; /* this is to make sure we don't double scan the bus,
776 for bridged devices primarily */
777
778 pci_lock_rescan_remove();
779
780 if (!(bus_structure_fixup(func->busno)))
781 flag = 1;
782 if (func->dev == NULL)
783 func->dev = pci_get_bus_and_slot(func->busno,
784 PCI_DEVFN(func->device, func->function));
785
786 if (func->dev == NULL) {
787 struct pci_bus *bus = pci_find_bus(0, func->busno);
788 if (!bus)
789 goto out;
790
791 num = pci_scan_slot(bus,
792 PCI_DEVFN(func->device, func->function));
793 if (num)
794 pci_bus_add_devices(bus);
795
796 func->dev = pci_get_bus_and_slot(func->busno,
797 PCI_DEVFN(func->device, func->function));
798 if (func->dev == NULL) {
799 err("ERROR... : pci_dev still NULL\n");
800 goto out;
801 }
802 }
803 if (!(flag) && (func->dev->hdr_type == PCI_HEADER_TYPE_BRIDGE)) {
804 pci_hp_add_bridge(func->dev);
805 child = func->dev->subordinate;
806 if (child)
807 pci_bus_add_devices(child);
808 }
809
810 out:
811 pci_unlock_rescan_remove();
812 return 0;
813}
814
815/*******************************************************
816 * Returns whether the bus is empty or not
817 *******************************************************/
818static int is_bus_empty(struct slot *slot_cur)
819{
820 int rc;
821 struct slot *tmp_slot;
822 u8 i = slot_cur->bus_on->slot_min;
823
824 while (i <= slot_cur->bus_on->slot_max) {
825 if (i == slot_cur->number) {
826 i++;
827 continue;
828 }
829 tmp_slot = ibmphp_get_slot_from_physical_num(i);
830 if (!tmp_slot)
831 return 0;
832 rc = slot_update(&tmp_slot);
833 if (rc)
834 return 0;
835 if (SLOT_PRESENT(tmp_slot->status) &&
836 SLOT_PWRGD(tmp_slot->status))
837 return 0;
838 i++;
839 }
840 return 1;
841}
842
843/***********************************************************
844 * If the HPC permits and the bus currently empty, tries to set the
845 * bus speed and mode at the maximum card and bus capability
846 * Parameters: slot
847 * Returns: bus is set (0) or error code
848 ***********************************************************/
849static int set_bus(struct slot *slot_cur)
850{
851 int rc;
852 u8 speed;
853 u8 cmd = 0x0;
854 int retval;
855 static struct pci_device_id ciobx[] = {
856 { PCI_DEVICE(PCI_VENDOR_ID_SERVERWORKS, 0x0101) },
857 { },
858 };
859
860 debug("%s - entry slot # %d\n", __func__, slot_cur->number);
861 if (SET_BUS_STATUS(slot_cur->ctrl) && is_bus_empty(slot_cur)) {
862 rc = slot_update(&slot_cur);
863 if (rc)
864 return rc;
865 speed = SLOT_SPEED(slot_cur->ext_status);
866 debug("ext_status = %x, speed = %x\n", slot_cur->ext_status, speed);
867 switch (speed) {
868 case HPC_SLOT_SPEED_33:
869 cmd = HPC_BUS_33CONVMODE;
870 break;
871 case HPC_SLOT_SPEED_66:
872 if (SLOT_PCIX(slot_cur->ext_status)) {
873 if ((slot_cur->supported_speed >= BUS_SPEED_66) &&
874 (slot_cur->supported_bus_mode == BUS_MODE_PCIX))
875 cmd = HPC_BUS_66PCIXMODE;
876 else if (!SLOT_BUS_MODE(slot_cur->ext_status))
877 /* if max slot/bus capability is 66 pci
878 and there's no bus mode mismatch, then
879 the adapter supports 66 pci */
880 cmd = HPC_BUS_66CONVMODE;
881 else
882 cmd = HPC_BUS_33CONVMODE;
883 } else {
884 if (slot_cur->supported_speed >= BUS_SPEED_66)
885 cmd = HPC_BUS_66CONVMODE;
886 else
887 cmd = HPC_BUS_33CONVMODE;
888 }
889 break;
890 case HPC_SLOT_SPEED_133:
891 switch (slot_cur->supported_speed) {
892 case BUS_SPEED_33:
893 cmd = HPC_BUS_33CONVMODE;
894 break;
895 case BUS_SPEED_66:
896 if (slot_cur->supported_bus_mode == BUS_MODE_PCIX)
897 cmd = HPC_BUS_66PCIXMODE;
898 else
899 cmd = HPC_BUS_66CONVMODE;
900 break;
901 case BUS_SPEED_100:
902 cmd = HPC_BUS_100PCIXMODE;
903 break;
904 case BUS_SPEED_133:
905 /* This is to take care of the bug in CIOBX chip */
906 if (pci_dev_present(ciobx))
907 ibmphp_hpc_writeslot(slot_cur,
908 HPC_BUS_100PCIXMODE);
909 cmd = HPC_BUS_133PCIXMODE;
910 break;
911 default:
912 err("Wrong bus speed\n");
913 return -ENODEV;
914 }
915 break;
916 default:
917 err("wrong slot speed\n");
918 return -ENODEV;
919 }
920 debug("setting bus speed for slot %d, cmd %x\n",
921 slot_cur->number, cmd);
922 retval = ibmphp_hpc_writeslot(slot_cur, cmd);
923 if (retval) {
924 err("setting bus speed failed\n");
925 return retval;
926 }
927 if (CTLR_RESULT(slot_cur->ctrl->status)) {
928 err("command not completed successfully in set_bus\n");
929 return -EIO;
930 }
931 }
932 /* This is for x440, once Brandon fixes the firmware,
933 will not need this delay */
934 msleep(1000);
935 debug("%s -Exit\n", __func__);
936 return 0;
937}
938
939/* This routine checks the bus limitations that the slot is on from the BIOS.
940 * This is used in deciding whether or not to power up the slot.
941 * (electrical/spec limitations. For example, >1 133 MHz or >2 66 PCI cards on
942 * same bus)
943 * Parameters: slot
944 * Returns: 0 = no limitations, -EINVAL = exceeded limitations on the bus
945 */
946static int check_limitations(struct slot *slot_cur)
947{
948 u8 i;
949 struct slot *tmp_slot;
950 u8 count = 0;
951 u8 limitation = 0;
952
953 for (i = slot_cur->bus_on->slot_min; i <= slot_cur->bus_on->slot_max; i++) {
954 tmp_slot = ibmphp_get_slot_from_physical_num(i);
955 if (!tmp_slot)
956 return -ENODEV;
957 if ((SLOT_PWRGD(tmp_slot->status)) &&
958 !(SLOT_CONNECT(tmp_slot->status)))
959 count++;
960 }
961 get_cur_bus_info(&slot_cur);
962 switch (slot_cur->bus_on->current_speed) {
963 case BUS_SPEED_33:
964 limitation = slot_cur->bus_on->slots_at_33_conv;
965 break;
966 case BUS_SPEED_66:
967 if (slot_cur->bus_on->current_bus_mode == BUS_MODE_PCIX)
968 limitation = slot_cur->bus_on->slots_at_66_pcix;
969 else
970 limitation = slot_cur->bus_on->slots_at_66_conv;
971 break;
972 case BUS_SPEED_100:
973 limitation = slot_cur->bus_on->slots_at_100_pcix;
974 break;
975 case BUS_SPEED_133:
976 limitation = slot_cur->bus_on->slots_at_133_pcix;
977 break;
978 }
979
980 if ((count + 1) > limitation)
981 return -EINVAL;
982 return 0;
983}
984
985static inline void print_card_capability(struct slot *slot_cur)
986{
987 info("capability of the card is ");
988 if ((slot_cur->ext_status & CARD_INFO) == PCIX133)
989 info(" 133 MHz PCI-X\n");
990 else if ((slot_cur->ext_status & CARD_INFO) == PCIX66)
991 info(" 66 MHz PCI-X\n");
992 else if ((slot_cur->ext_status & CARD_INFO) == PCI66)
993 info(" 66 MHz PCI\n");
994 else
995 info(" 33 MHz PCI\n");
996
997}
998
999/* This routine will power on the slot, configure the device(s) and find the
1000 * drivers for them.
1001 * Parameters: hotplug_slot
1002 * Returns: 0 or failure codes
1003 */
1004static int enable_slot(struct hotplug_slot *hs)
1005{
1006 int rc, i, rcpr;
1007 struct slot *slot_cur;
1008 u8 function;
1009 struct pci_func *tmp_func;
1010
1011 ibmphp_lock_operations();
1012
1013 debug("ENABLING SLOT........\n");
1014 slot_cur = hs->private;
1015
1016 rc = validate(slot_cur, ENABLE);
1017 if (rc) {
1018 err("validate function failed\n");
1019 goto error_nopower;
1020 }
1021
1022 attn_LED_blink(slot_cur);
1023
1024 rc = set_bus(slot_cur);
1025 if (rc) {
1026 err("was not able to set the bus\n");
1027 goto error_nopower;
1028 }
1029
1030 /*-----------------debugging------------------------------*/
1031 get_cur_bus_info(&slot_cur);
1032 debug("the current bus speed right after set_bus = %x\n",
1033 slot_cur->bus_on->current_speed);
1034 /*----------------------------------------------------------*/
1035
1036 rc = check_limitations(slot_cur);
1037 if (rc) {
1038 err("Adding this card exceeds the limitations of this bus.\n");
1039 err("(i.e., >1 133MHz cards running on same bus, or >2 66 PCI cards running on same bus.\n");
1040 err("Try hot-adding into another bus\n");
1041 rc = -EINVAL;
1042 goto error_nopower;
1043 }
1044
1045 rc = power_on(slot_cur);
1046
1047 if (rc) {
1048 err("something wrong when powering up... please see below for details\n");
1049 /* need to turn off before on, otherwise, blinking overwrites */
1050 attn_off(slot_cur);
1051 attn_on(slot_cur);
1052 if (slot_update(&slot_cur)) {
1053 attn_off(slot_cur);
1054 attn_on(slot_cur);
1055 rc = -ENODEV;
1056 goto exit;
1057 }
1058 /* Check to see the error of why it failed */
1059 if ((SLOT_POWER(slot_cur->status)) &&
1060 !(SLOT_PWRGD(slot_cur->status)))
1061 err("power fault occurred trying to power up\n");
1062 else if (SLOT_BUS_SPEED(slot_cur->status)) {
1063 err("bus speed mismatch occurred. please check current bus speed and card capability\n");
1064 print_card_capability(slot_cur);
1065 } else if (SLOT_BUS_MODE(slot_cur->ext_status)) {
1066 err("bus mode mismatch occurred. please check current bus mode and card capability\n");
1067 print_card_capability(slot_cur);
1068 }
1069 ibmphp_update_slot_info(slot_cur);
1070 goto exit;
1071 }
1072 debug("after power_on\n");
1073 /*-----------------------debugging---------------------------*/
1074 get_cur_bus_info(&slot_cur);
1075 debug("the current bus speed right after power_on = %x\n",
1076 slot_cur->bus_on->current_speed);
1077 /*----------------------------------------------------------*/
1078
1079 rc = slot_update(&slot_cur);
1080 if (rc)
1081 goto error_power;
1082
1083 rc = -EINVAL;
1084 if (SLOT_POWER(slot_cur->status) && !(SLOT_PWRGD(slot_cur->status))) {
1085 err("power fault occurred trying to power up...\n");
1086 goto error_power;
1087 }
1088 if (SLOT_POWER(slot_cur->status) && (SLOT_BUS_SPEED(slot_cur->status))) {
1089 err("bus speed mismatch occurred. please check current bus speed and card capability\n");
1090 print_card_capability(slot_cur);
1091 goto error_power;
1092 }
1093 /* Don't think this case will happen after above checks...
1094 * but just in case, for paranoia sake */
1095 if (!(SLOT_POWER(slot_cur->status))) {
1096 err("power on failed...\n");
1097 goto error_power;
1098 }
1099
1100 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1101 if (!slot_cur->func) {
1102 /* We cannot do update_slot_info here, since no memory for
1103 * kmalloc n.e.ways, and update_slot_info allocates some */
1104 err("out of system memory\n");
1105 rc = -ENOMEM;
1106 goto error_power;
1107 }
1108 slot_cur->func->busno = slot_cur->bus;
1109 slot_cur->func->device = slot_cur->device;
1110 for (i = 0; i < 4; i++)
1111 slot_cur->func->irq[i] = slot_cur->irq[i];
1112
1113 debug("b4 configure_card, slot_cur->bus = %x, slot_cur->device = %x\n",
1114 slot_cur->bus, slot_cur->device);
1115
1116 if (ibmphp_configure_card(slot_cur->func, slot_cur->number)) {
1117 err("configure_card was unsuccessful...\n");
1118 /* true because don't need to actually deallocate resources,
1119 * just remove references */
1120 ibmphp_unconfigure_card(&slot_cur, 1);
1121 debug("after unconfigure_card\n");
1122 slot_cur->func = NULL;
1123 rc = -ENOMEM;
1124 goto error_power;
1125 }
1126
1127 function = 0x00;
1128 do {
1129 tmp_func = ibm_slot_find(slot_cur->bus, slot_cur->func->device,
1130 function++);
1131 if (tmp_func && !(tmp_func->dev))
1132 ibm_configure_device(tmp_func);
1133 } while (tmp_func);
1134
1135 attn_off(slot_cur);
1136 if (slot_update(&slot_cur)) {
1137 rc = -EFAULT;
1138 goto exit;
1139 }
1140 ibmphp_print_test();
1141 rc = ibmphp_update_slot_info(slot_cur);
1142exit:
1143 ibmphp_unlock_operations();
1144 return rc;
1145
1146error_nopower:
1147 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1148 attn_on(slot_cur);
1149error_cont:
1150 rcpr = slot_update(&slot_cur);
1151 if (rcpr) {
1152 rc = rcpr;
1153 goto exit;
1154 }
1155 ibmphp_update_slot_info(slot_cur);
1156 goto exit;
1157
1158error_power:
1159 attn_off(slot_cur); /* need to turn off if was blinking b4 */
1160 attn_on(slot_cur);
1161 rcpr = power_off(slot_cur);
1162 if (rcpr) {
1163 rc = rcpr;
1164 goto exit;
1165 }
1166 goto error_cont;
1167}
1168
1169/**************************************************************
1170* HOT REMOVING ADAPTER CARD *
1171* INPUT: POINTER TO THE HOTPLUG SLOT STRUCTURE *
1172* OUTPUT: SUCCESS 0 ; FAILURE: UNCONFIGURE , VALIDATE *
1173* DISABLE POWER , *
1174**************************************************************/
1175static int ibmphp_disable_slot(struct hotplug_slot *hotplug_slot)
1176{
1177 struct slot *slot = hotplug_slot->private;
1178 int rc;
1179
1180 ibmphp_lock_operations();
1181 rc = ibmphp_do_disable_slot(slot);
1182 ibmphp_unlock_operations();
1183 return rc;
1184}
1185
1186int ibmphp_do_disable_slot(struct slot *slot_cur)
1187{
1188 int rc;
1189 u8 flag;
1190
1191 debug("DISABLING SLOT...\n");
1192
1193 if ((slot_cur == NULL) || (slot_cur->ctrl == NULL))
1194 return -ENODEV;
1195
1196 flag = slot_cur->flag;
1197 slot_cur->flag = 1;
1198
1199 if (flag == 1) {
1200 rc = validate(slot_cur, DISABLE);
1201 /* checking if powered off already & valid slot # */
1202 if (rc)
1203 goto error;
1204 }
1205 attn_LED_blink(slot_cur);
1206
1207 if (slot_cur->func == NULL) {
1208 /* We need this for functions that were there on bootup */
1209 slot_cur->func = kzalloc(sizeof(struct pci_func), GFP_KERNEL);
1210 if (!slot_cur->func) {
1211 err("out of system memory\n");
1212 rc = -ENOMEM;
1213 goto error;
1214 }
1215 slot_cur->func->busno = slot_cur->bus;
1216 slot_cur->func->device = slot_cur->device;
1217 }
1218
1219 ibm_unconfigure_device(slot_cur->func);
1220
1221 /*
1222 * If we got here from latch suddenly opening on operating card or
1223 * a power fault, there's no power to the card, so cannot
1224 * read from it to determine what resources it occupied. This operation
1225 * is forbidden anyhow. The best we can do is remove it from kernel
1226 * lists at least */
1227
1228 if (!flag) {
1229 attn_off(slot_cur);
1230 return 0;
1231 }
1232
1233 rc = ibmphp_unconfigure_card(&slot_cur, 0);
1234 slot_cur->func = NULL;
1235 debug("in disable_slot. after unconfigure_card\n");
1236 if (rc) {
1237 err("could not unconfigure card.\n");
1238 goto error;
1239 }
1240
1241 rc = ibmphp_hpc_writeslot(slot_cur, HPC_SLOT_OFF);
1242 if (rc)
1243 goto error;
1244
1245 attn_off(slot_cur);
1246 rc = slot_update(&slot_cur);
1247 if (rc)
1248 goto exit;
1249
1250 rc = ibmphp_update_slot_info(slot_cur);
1251 ibmphp_print_test();
1252exit:
1253 return rc;
1254
1255error:
1256 /* Need to turn off if was blinking b4 */
1257 attn_off(slot_cur);
1258 attn_on(slot_cur);
1259 if (slot_update(&slot_cur)) {
1260 rc = -EFAULT;
1261 goto exit;
1262 }
1263 if (flag)
1264 ibmphp_update_slot_info(slot_cur);
1265 goto exit;
1266}
1267
1268struct hotplug_slot_ops ibmphp_hotplug_slot_ops = {
1269 .set_attention_status = set_attention_status,
1270 .enable_slot = enable_slot,
1271 .disable_slot = ibmphp_disable_slot,
1272 .hardware_test = NULL,
1273 .get_power_status = get_power_status,
1274 .get_attention_status = get_attention_status,
1275 .get_latch_status = get_latch_status,
1276 .get_adapter_status = get_adapter_present,
1277/* .get_max_adapter_speed = get_max_adapter_speed,
1278 .get_bus_name_status = get_bus_name,
1279*/
1280};
1281
1282static void ibmphp_unload(void)
1283{
1284 free_slots();
1285 debug("after slots\n");
1286 ibmphp_free_resources();
1287 debug("after resources\n");
1288 ibmphp_free_bus_info_queue();
1289 debug("after bus info\n");
1290 ibmphp_free_ebda_hpc_queue();
1291 debug("after ebda hpc\n");
1292 ibmphp_free_ebda_pci_rsrc_queue();
1293 debug("after ebda pci rsrc\n");
1294 kfree(ibmphp_pci_bus);
1295}
1296
1297static int __init ibmphp_init(void)
1298{
1299 struct pci_bus *bus;
1300 int i = 0;
1301 int rc = 0;
1302
1303 init_flag = 1;
1304
1305 info(DRIVER_DESC " version: " DRIVER_VERSION "\n");
1306
1307 ibmphp_pci_bus = kmalloc(sizeof(*ibmphp_pci_bus), GFP_KERNEL);
1308 if (!ibmphp_pci_bus) {
1309 err("out of memory\n");
1310 rc = -ENOMEM;
1311 goto exit;
1312 }
1313
1314 bus = pci_find_bus(0, 0);
1315 if (!bus) {
1316 err("Can't find the root pci bus, can not continue\n");
1317 rc = -ENODEV;
1318 goto error;
1319 }
1320 memcpy(ibmphp_pci_bus, bus, sizeof(*ibmphp_pci_bus));
1321
1322 ibmphp_debug = debug;
1323
1324 ibmphp_hpc_initvars();
1325
1326 for (i = 0; i < 16; i++)
1327 irqs[i] = 0;
1328
1329 rc = ibmphp_access_ebda();
1330 if (rc)
1331 goto error;
1332 debug("after ibmphp_access_ebda()\n");
1333
1334 rc = ibmphp_rsrc_init();
1335 if (rc)
1336 goto error;
1337 debug("AFTER Resource & EBDA INITIALIZATIONS\n");
1338
1339 max_slots = get_max_slots();
1340
1341 rc = ibmphp_register_pci();
1342 if (rc)
1343 goto error;
1344
1345 if (init_ops()) {
1346 rc = -ENODEV;
1347 goto error;
1348 }
1349
1350 ibmphp_print_test();
1351 rc = ibmphp_hpc_start_poll_thread();
1352 if (rc)
1353 goto error;
1354
1355exit:
1356 return rc;
1357
1358error:
1359 ibmphp_unload();
1360 goto exit;
1361}
1362
1363static void __exit ibmphp_exit(void)
1364{
1365 ibmphp_hpc_stop_poll_thread();
1366 debug("after polling\n");
1367 ibmphp_unload();
1368 debug("done\n");
1369}
1370
1371module_init(ibmphp_init);
1372module_exit(ibmphp_exit);