1/*
  2 * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
  3 *
  4 * This file is dual-licensed: you can use it either under the terms
  5 * of the GPL or the X11 license, at your option. Note that this dual
  6 * licensing only applies to this file, and not this project as a
  7 * whole.
  8 *
  9 *  a) This file is free software; you can redistribute it and/or
 10 *     modify it under the terms of the GNU General Public License as
 11 *     published by the Free Software Foundation; either version 2 of the
 12 *     License, or (at your option) any later version.
 13 *
 14 *     This file is distributed in the hope that it will be useful,
 15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17 *     GNU General Public License for more details.
 18 *
 19 * Or, alternatively,
 20 *
 21 *  b) Permission is hereby granted, free of charge, to any person
 22 *     obtaining a copy of this software and associated documentation
 23 *     files (the "Software"), to deal in the Software without
 24 *     restriction, including without limitation the rights to use,
 25 *     copy, modify, merge, publish, distribute, sublicense, and/or
 26 *     sell copies of the Software, and to permit persons to whom the
 27 *     Software is furnished to do so, subject to the following
 28 *     conditions:
 29 *
 30 *     The above copyright notice and this permission notice shall be
 31 *     included in all copies or substantial portions of the Software.
 32 *
 33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 40 *     OTHER DEALINGS IN THE SOFTWARE.
 41 */
 42
 43/dts-v1/;
 44#include "sun8i-h3.dtsi"
 45#include "sunxi-common-regulators.dtsi"
 46
 47#include <dt-bindings/gpio/gpio.h>
 48#include <dt-bindings/input/input.h>
 
 49
 50/ {
 51	model = "Xunlong Orange Pi PC";
 52	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
 53
 54	aliases {
 55		ethernet0 = &emac;
 56		serial0 = &uart0;
 57	};
 58
 59	chosen {
 60		stdout-path = "serial0:115200n8";
 61	};
 62
 63	connector {
 64		compatible = "hdmi-connector";
 65		type = "a";
 66
 67		port {
 68			hdmi_con_in: endpoint {
 69				remote-endpoint = <&hdmi_out_con>;
 70			};
 71		};
 72	};
 73
 74	leds {
 75		compatible = "gpio-leds";
 76		pinctrl-names = "default";
 77		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 78
 79		pwr_led {
 80			label = "orangepi:green:pwr";
 81			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 82			default-state = "on";
 83		};
 84
 85		status_led {
 86			label = "orangepi:red:status";
 87			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
 88		};
 89	};
 90
 91	r_gpio_keys {
 92		compatible = "gpio-keys";
 93		pinctrl-names = "default";
 94		pinctrl-0 = <&sw_r_opc>;
 95
 96		sw4 {
 97			label = "sw4";
 98			linux,code = <BTN_0>;
 99			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
100		};
101	};
102};
103
104&codec {
105	allwinner,audio-routing =
106		"Line Out", "LINEOUT",
107		"MIC1", "Mic",
108		"Mic",  "MBIAS";
109	status = "okay";
110};
111
112&de {
113	status = "okay";
114};
115
116&ehci0 {
117	status = "okay";
118};
119
120&ehci1 {
121	status = "okay";
122};
123
124&ehci2 {
125	status = "okay";
126};
127
128&ehci3 {
129	status = "okay";
130};
131
132&emac {
133	phy-handle = <&int_mii_phy>;
134	phy-mode = "mii";
135	allwinner,leds-active-low;
136	status = "okay";
137};
138
139&hdmi {
140	status = "okay";
141};
142
143&hdmi_out {
144	hdmi_out_con: endpoint {
145		remote-endpoint = <&hdmi_con_in>;
146	};
147};
148
149&ir {
150	pinctrl-names = "default";
151	pinctrl-0 = <&ir_pins_a>;
152	status = "okay";
153};
154
155&mmc0 {
 
 
156	vmmc-supply = <&reg_vcc3v3>;
157	bus-width = <4>;
158	cd-gpios = <&pio 5 6 GPIO_ACTIVE_LOW>; /* PF6 */
159	status = "okay";
160};
161
162&ohci0 {
163	status = "okay";
164};
165
166&ohci1 {
167	status = "okay";
168};
169
170&ohci2 {
171	status = "okay";
172};
173
174&ohci3 {
175	status = "okay";
176};
177
178&pio {
179	leds_opc: led_pins {
180		pins = "PA15";
181		function = "gpio_out";
 
 
182	};
183};
184
185&r_pio {
186	leds_r_opc: led_pins {
187		pins = "PL10";
188		function = "gpio_out";
 
 
189	};
190
191	sw_r_opc: key_pins {
192		pins = "PL3";
193		function = "gpio_in";
 
 
194	};
195};
196
197&reg_usb0_vbus {
198	gpio = <&r_pio 0 2 GPIO_ACTIVE_HIGH>; /* PL2 */
199	status = "okay";
200};
201
202&uart0 {
203	pinctrl-names = "default";
204	pinctrl-0 = <&uart0_pins_a>;
205	status = "okay";
206};
207
208&uart1 {
209	pinctrl-names = "default";
210	pinctrl-0 = <&uart1_pins>;
211	status = "disabled";
212};
213
214&uart2 {
215	pinctrl-names = "default";
216	pinctrl-0 = <&uart2_pins>;
217	status = "disabled";
218};
219
220&uart3 {
221	pinctrl-names = "default";
222	pinctrl-0 = <&uart3_pins>;
223	status = "disabled";
224};
225
226&usb_otg {
227	dr_mode = "otg";
228	status = "okay";
229};
230
231&usbphy {
232	usb0_id_det-gpios = <&pio 6 12 GPIO_ACTIVE_HIGH>; /* PG12 */
233	usb0_vbus-supply = <&reg_usb0_vbus>;
234	/* VBUS on USB host ports are always on */
235	status = "okay";
236};

  1/*
  2 * Copyright (C) 2015 Chen-Yu Tsai <wens@csie.org>
  3 *
  4 * This file is dual-licensed: you can use it either under the terms
  5 * of the GPL or the X11 license, at your option. Note that this dual
  6 * licensing only applies to this file, and not this project as a
  7 * whole.
  8 *
  9 *  a) This file is free software; you can redistribute it and/or
 10 *     modify it under the terms of the GNU General Public License as
 11 *     published by the Free Software Foundation; either version 2 of the
 12 *     License, or (at your option) any later version.
 13 *
 14 *     This file is distributed in the hope that it will be useful,
 15 *     but WITHOUT ANY WARRANTY; without even the implied warranty of
 16 *     MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 17 *     GNU General Public License for more details.
 18 *
 19 * Or, alternatively,
 20 *
 21 *  b) Permission is hereby granted, free of charge, to any person
 22 *     obtaining a copy of this software and associated documentation
 23 *     files (the "Software"), to deal in the Software without
 24 *     restriction, including without limitation the rights to use,
 25 *     copy, modify, merge, publish, distribute, sublicense, and/or
 26 *     sell copies of the Software, and to permit persons to whom the
 27 *     Software is furnished to do so, subject to the following
 28 *     conditions:
 29 *
 30 *     The above copyright notice and this permission notice shall be
 31 *     included in all copies or substantial portions of the Software.
 32 *
 33 *     THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND,
 34 *     EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES
 35 *     OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND
 36 *     NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT
 37 *     HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER LIABILITY,
 38 *     WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
 39 *     FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
 40 *     OTHER DEALINGS IN THE SOFTWARE.
 41 */
 42
 43/dts-v1/;
 44#include "sun8i-h3.dtsi"
 45#include "sunxi-common-regulators.dtsi"
 46
 47#include <dt-bindings/gpio/gpio.h>
 48#include <dt-bindings/input/input.h>
 49#include <dt-bindings/pinctrl/sun4i-a10.h>
 50
 51/ {
 52	model = "Xunlong Orange Pi PC";
 53	compatible = "xunlong,orangepi-pc", "allwinner,sun8i-h3";
 54
 55	aliases {
 
 56		serial0 = &uart0;
 57	};
 58
 59	chosen {
 60		stdout-path = "serial0:115200n8";
 61	};
 62
 
 
 
 
 
 
 
 
 
 
 
 63	leds {
 64		compatible = "gpio-leds";
 65		pinctrl-names = "default";
 66		pinctrl-0 = <&leds_opc>, <&leds_r_opc>;
 67
 68		pwr_led {
 69			label = "orangepi:green:pwr";
 70			gpios = <&r_pio 0 10 GPIO_ACTIVE_HIGH>;
 71			default-state = "on";
 72		};
 73
 74		status_led {
 75			label = "orangepi:red:status";
 76			gpios = <&pio 0 15 GPIO_ACTIVE_HIGH>;
 77		};
 78	};
 79
 80	r_gpio_keys {
 81		compatible = "gpio-keys";
 82		pinctrl-names = "default";
 83		pinctrl-0 = <&sw_r_opc>;
 84
 85		sw4 {
 86			label = "sw4";
 87			linux,code = <BTN_0>;
 88			gpios = <&r_pio 0 3 GPIO_ACTIVE_LOW>;
 89		};
 90	};
 91};
 92
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 93&ehci1 {
 94	status = "okay";
 95};
 96
 97&ehci2 {
 98	status = "okay";
 99};
100
101&ehci3 {
102	status = "okay";
103};
104
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
105&ir {
106	pinctrl-names = "default";
107	pinctrl-0 = <&ir_pins_a>;
108	status = "okay";
109};
110
111&mmc0 {
112	pinctrl-names = "default";
113	pinctrl-0 = <&mmc0_pins_a>, <&mmc0_cd_pin>;
114	vmmc-supply = <&reg_vcc3v3>;
115	bus-width = <4>;
116	cd-gpios = <&pio 5 6 GPIO_ACTIVE_HIGH>; /* PF6 */
117	cd-inverted;
 
 
 
118	status = "okay";
119};
120
121&ohci1 {
122	status = "okay";
123};
124
125&ohci2 {
126	status = "okay";
127};
128
129&ohci3 {
130	status = "okay";
131};
132
133&pio {
134	leds_opc: led_pins@0 {
135		allwinner,pins = "PA15";
136		allwinner,function = "gpio_out";
137		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
138		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
139	};
140};
141
142&r_pio {
143	leds_r_opc: led_pins@0 {
144		allwinner,pins = "PL10";
145		allwinner,function = "gpio_out";
146		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
147		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
148	};
149
150	sw_r_opc: key_pins@0 {
151		allwinner,pins = "PL3";
152		allwinner,function = "gpio_in";
153		allwinner,drive = <SUN4I_PINCTRL_10_MA>;
154		allwinner,pull = <SUN4I_PINCTRL_NO_PULL>;
155	};
156};
157
 
 
 
 
 
158&uart0 {
159	pinctrl-names = "default";
160	pinctrl-0 = <&uart0_pins_a>;
161	status = "okay";
162};
163
164&uart1 {
165	pinctrl-names = "default";
166	pinctrl-0 = <&uart1_pins>;
167	status = "disabled";
168};
169
170&uart2 {
171	pinctrl-names = "default";
172	pinctrl-0 = <&uart2_pins>;
173	status = "disabled";
174};
175
176&uart3 {
177	pinctrl-names = "default";
178	pinctrl-0 = <&uart3_pins>;
179	status = "disabled";
180};
181
 
 
 
 
 
182&usbphy {
183	/* USB VBUS is always on */
 
 
184	status = "okay";
185};