Loading...
1// SPDX-License-Identifier: GPL-2.0
2/*
3 * Samsung's S5PV210 SoC device tree source
4 *
5 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
6 *
7 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
8 * Tomasz Figa <t.figa@samsung.com>
9 *
10 * Board device tree source for Samsung Goni board.
11 */
12
13/dts-v1/;
14#include <dt-bindings/input/input.h>
15#include "s5pv210.dtsi"
16
17/ {
18 model = "Samsung Goni based on S5PC110";
19 compatible = "samsung,goni", "samsung,s5pv210";
20
21 aliases {
22 i2c3 = &i2c_pmic;
23 };
24
25 chosen {
26 bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
27 };
28
29 memory@30000000 {
30 device_type = "memory";
31 reg = <0x30000000 0x05000000
32 0x40000000 0x10000000
33 0x50000000 0x08000000>;
34 };
35
36 regulators {
37 compatible = "simple-bus";
38 #address-cells = <1>;
39 #size-cells = <0>;
40
41 vtf_reg: fixed-regulator@0 {
42 compatible = "regulator-fixed";
43 regulator-name = "V_TF_2.8V";
44 regulator-min-microvolt = <2800000>;
45 regulator-max-microvolt = <2800000>;
46 reg = <0>;
47 gpio = <&mp05 4 0>;
48 enable-active-high;
49 };
50
51 pda_reg: fixed-regulator@1 {
52 compatible = "regulator-fixed";
53 regulator-name = "VCC_1.8V_PDA";
54 regulator-min-microvolt = <1800000>;
55 regulator-max-microvolt = <1800000>;
56 reg = <1>;
57 };
58
59 bat_reg: fixed-regulator@2 {
60 compatible = "regulator-fixed";
61 regulator-name = "V_BAT";
62 regulator-min-microvolt = <3700000>;
63 regulator-max-microvolt = <3700000>;
64 reg = <2>;
65 };
66
67 tsp_reg: fixed-regulator@3 {
68 compatible = "regulator-fixed";
69 regulator-name = "TSP_VDD";
70 regulator-min-microvolt = <2800000>;
71 regulator-max-microvolt = <2800000>;
72 reg = <3>;
73 gpio = <&gpj1 3 0>;
74 enable-active-high;
75 };
76 };
77
78 i2c_pmic: i2c-pmic {
79 compatible = "i2c-gpio";
80 gpios = <&gpj4 0 0>, /* sda */
81 <&gpj4 3 0>; /* scl */
82 i2c-gpio,delay-us = <2>; /* ~100 kHz */
83 #address-cells = <1>;
84 #size-cells = <0>;
85
86 pmic@66 {
87 compatible = "national,lp3974";
88 reg = <0x66>;
89
90 max8998,pmic-buck1-default-dvs-idx = <0>;
91 max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
92 <&gph0 4 0>;
93 max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
94 <1200000>, <1200000>;
95
96 max8998,pmic-buck2-default-dvs-idx = <0>;
97 max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
98 max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
99
100 regulators {
101 ldo2_reg: LDO2 {
102 regulator-name = "VALIVE_1.1V";
103 regulator-min-microvolt = <1100000>;
104 regulator-max-microvolt = <1100000>;
105 regulator-always-on;
106 };
107
108 ldo3_reg: LDO3 {
109 regulator-name = "VUSB+MIPI_1.1V";
110 regulator-min-microvolt = <1100000>;
111 regulator-max-microvolt = <1100000>;
112 regulator-always-on;
113 };
114
115 ldo4_reg: LDO4 {
116 regulator-name = "VADC_3.3V";
117 regulator-min-microvolt = <3300000>;
118 regulator-max-microvolt = <3300000>;
119 };
120
121 ldo5_reg: LDO5 {
122 regulator-name = "VTF_2.8V";
123 regulator-min-microvolt = <2800000>;
124 regulator-max-microvolt = <2800000>;
125 };
126
127 ldo6_reg: LDO6 {
128 regulator-name = "VCC_3.3V";
129 regulator-min-microvolt = <3300000>;
130 regulator-max-microvolt = <3300000>;
131 };
132
133 ldo7_reg: LDO7 {
134 regulator-name = "VLCD_1.8V";
135 regulator-min-microvolt = <1800000>;
136 regulator-max-microvolt = <1800000>;
137 regulator-always-on;
138 };
139
140 ldo8_reg: LDO8 {
141 regulator-name = "VUSB+VDAC_3.3V";
142 regulator-min-microvolt = <3300000>;
143 regulator-max-microvolt = <3300000>;
144 };
145
146 ldo9_reg: LDO9 {
147 regulator-name = "VCC+VCAM_2.8V";
148 regulator-min-microvolt = <2800000>;
149 regulator-max-microvolt = <2800000>;
150 };
151
152 ldo10_reg: LDO10 {
153 regulator-name = "VPLL_1.1V";
154 regulator-min-microvolt = <1100000>;
155 regulator-max-microvolt = <1100000>;
156 regulator-boot-on;
157 };
158
159 ldo11_reg: LDO11 {
160 regulator-name = "CAM_IO_2.8V";
161 regulator-min-microvolt = <2800000>;
162 regulator-max-microvolt = <2800000>;
163 };
164
165 ldo12_reg: LDO12 {
166 regulator-name = "CAM_ISP_1.2V";
167 regulator-min-microvolt = <1200000>;
168 regulator-max-microvolt = <1200000>;
169 };
170
171 ldo13_reg: LDO13 {
172 regulator-name = "CAM_A_2.8V";
173 regulator-min-microvolt = <2800000>;
174 regulator-max-microvolt = <2800000>;
175 };
176
177 ldo14_reg: LDO14 {
178 regulator-name = "CAM_CIF_1.8V";
179 regulator-min-microvolt = <1800000>;
180 regulator-max-microvolt = <1800000>;
181 };
182
183 ldo15_reg: LDO15 {
184 regulator-name = "CAM_AF_3.3V";
185 regulator-min-microvolt = <3300000>;
186 regulator-max-microvolt = <3300000>;
187 };
188
189 ldo16_reg: LDO16 {
190 regulator-name = "VMIPI_1.8V";
191 regulator-min-microvolt = <1800000>;
192 regulator-max-microvolt = <1800000>;
193 };
194
195 ldo17_reg: LDO17 {
196 regulator-name = "CAM_8M_1.8V";
197 regulator-min-microvolt = <1800000>;
198 regulator-max-microvolt = <1800000>;
199 regulator-always-on;
200 };
201
202 buck1_reg: BUCK1 {
203 regulator-name = "VARM_1.2V";
204 regulator-min-microvolt = <1200000>;
205 regulator-max-microvolt = <1200000>;
206 };
207
208 buck2_reg: BUCK2 {
209 regulator-name = "VINT_1.2V";
210 regulator-min-microvolt = <1200000>;
211 regulator-max-microvolt = <1200000>;
212 };
213
214 buck3_reg: BUCK3 {
215 regulator-name = "VCC_1.8V";
216 regulator-min-microvolt = <1800000>;
217 regulator-max-microvolt = <1800000>;
218 regulator-always-on;
219 };
220
221 buck4_reg: BUCK4 {
222 regulator-name = "CAM_CORE_1.2V";
223 regulator-min-microvolt = <1200000>;
224 regulator-max-microvolt = <1200000>;
225 regulator-always-on;
226 };
227 };
228 };
229 };
230
231 gpio-keys {
232 compatible = "gpio-keys";
233
234 power-key {
235 gpios = <&gph2 6 1>;
236 linux,code = <KEY_POWER>;
237 label = "power";
238 debounce-interval = <1>;
239 wakeup-source;
240 };
241 };
242};
243
244&xusbxti {
245 clock-frequency = <24000000>;
246};
247
248&keypad {
249 linux,input-no-autorepeat;
250 wakeup-source;
251 samsung,keypad-num-rows = <3>;
252 samsung,keypad-num-columns = <3>;
253 pinctrl-names = "default";
254 pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
255 <&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
256 status = "okay";
257
258 key_1 {
259 keypad,row = <0>;
260 keypad,column = <1>;
261 linux,code = <KEY_CONNECT>;
262 };
263
264 key_2 {
265 keypad,row = <0>;
266 keypad,column = <2>;
267 linux,code = <KEY_BACK>;
268 };
269
270 key_3 {
271 keypad,row = <1>;
272 keypad,column = <1>;
273 linux,code = <KEY_CAMERA_FOCUS>;
274 };
275
276 key_4 {
277 keypad,row = <1>;
278 keypad,column = <2>;
279 linux,code = <KEY_VOLUMEUP>;
280 };
281
282 key_5 {
283 keypad,row = <2>;
284 keypad,column = <1>;
285 linux,code = <KEY_CAMERA>;
286 };
287
288 key_6 {
289 keypad,row = <2>;
290 keypad,column = <2>;
291 linux,code = <KEY_VOLUMEDOWN>;
292 };
293};
294
295&uart0 {
296 status = "okay";
297};
298
299&uart1 {
300 status = "okay";
301};
302
303&uart2 {
304 status = "okay";
305};
306
307&uart3 {
308 status = "okay";
309};
310
311&sdhci0 {
312 bus-width = <4>;
313 non-removable;
314 vmmc-supply = <&ldo5_reg>;
315 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
316 pinctrl-names = "default";
317 status = "okay";
318};
319
320&sdhci2 {
321 bus-width = <4>;
322 cd-gpios = <&gph3 4 1>;
323 vmmc-supply = <&vtf_reg>;
324 cd-inverted;
325 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
326 pinctrl-names = "default";
327 status = "okay";
328};
329
330&hsotg {
331 vusb_a-supply = <&ldo3_reg>;
332 vusb_d-supply = <&ldo8_reg>;
333 dr_mode = "peripheral";
334 status = "okay";
335};
336
337&usbphy {
338 status = "okay";
339};
340
341&i2c2 {
342 samsung,i2c-sda-delay = <100>;
343 samsung,i2c-max-bus-freq = <400000>;
344 samsung,i2c-slave-addr = <0x10>;
345 status = "okay";
346
347 tsp@4a {
348 compatible = "atmel,maxtouch";
349 reg = <0x4a>;
350 interrupt-parent = <&gpj0>;
351 interrupts = <5 2>;
352
353 atmel,x-line = <17>;
354 atmel,y-line = <11>;
355 atmel,x-size = <800>;
356 atmel,y-size = <480>;
357 atmel,burst-length = <0x21>;
358 atmel,threshold = <0x28>;
359 atmel,orientation = <1>;
360
361 vdd-supply = <&tsp_reg>;
362 };
363};
364
365&i2c0 {
366 samsung,i2c-sda-delay = <100>;
367 samsung,i2c-max-bus-freq = <100000>;
368 samsung,i2c-slave-addr = <0x10>;
369 status = "okay";
370
371 noon010pc30: sensor@30 {
372 compatible = "siliconfile,noon010pc30";
373 reg = <0x30>;
374 vddio-supply = <&ldo11_reg>;
375 vdda-supply = <&ldo13_reg>;
376 vdd_core-supply = <&ldo14_reg>;
377
378 clock-frequency = <16000000>;
379 clocks = <&clock_cam 0>;
380 clock-names = "mclk";
381 nreset-gpios = <&gpb 2 0>;
382 nstby-gpios = <&gpb 0 0>;
383
384 port {
385 noon010pc30_ep: endpoint {
386 remote-endpoint = <&fimc0_ep>;
387 bus-width = <8>;
388 hsync-active = <0>;
389 vsync-active = <1>;
390 pclk-sample = <1>;
391 };
392 };
393 };
394};
395
396&camera {
397 pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
398 pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
399 pinctrl-names = "default", "idle";
400
401 parallel-ports {
402 #address-cells = <1>;
403 #size-cells = <0>;
404
405 /* camera A input */
406 port@1 {
407 reg = <1>;
408 fimc0_ep: endpoint {
409 remote-endpoint = <&noon010pc30_ep>;
410 bus-width = <8>;
411 hsync-active = <1>;
412 vsync-active = <1>;
413 pclk-sample = <0>;
414 };
415 };
416 };
417};
418
419&fimd {
420 pinctrl-0 = <&lcd_clk &lcd_data24>;
421 pinctrl-names = "default";
422 status = "okay";
423
424 display-timings {
425 native-mode = <&timing0>;
426 timing0: timing {
427 /* 480x800@55Hz */
428 clock-frequency = <23439570>;
429 hactive = <480>;
430 hfront-porch = <16>;
431 hback-porch = <16>;
432 hsync-len = <2>;
433 vactive = <800>;
434 vback-porch = <2>;
435 vfront-porch = <28>;
436 vsync-len = <1>;
437 hsync-active = <0>;
438 vsync-active = <0>;
439 de-active = <0>;
440 pixelclk-active = <0>;
441 };
442 };
443};
444
445&onenand {
446 status = "okay";
447};
1/*
2 * Samsung's S5PV210 SoC device tree source
3 *
4 * Copyright (c) 2013-2014 Samsung Electronics, Co. Ltd.
5 *
6 * Mateusz Krawczuk <m.krawczuk@partner.samsung.com>
7 * Tomasz Figa <t.figa@samsung.com>
8 *
9 * Board device tree source for Samsung Goni board.
10 *
11 * This program is free software; you can redistribute it and/or modify
12 * it under the terms of the GNU General Public License version 2 as
13 * published by the Free Software Foundation.
14 */
15
16/dts-v1/;
17#include <dt-bindings/input/input.h>
18#include "s5pv210.dtsi"
19
20/ {
21 model = "Samsung Goni based on S5PC110";
22 compatible = "samsung,goni", "samsung,s5pv210";
23
24 aliases {
25 i2c3 = &i2c_pmic;
26 };
27
28 chosen {
29 bootargs = "console=ttySAC0,115200n8 root=/dev/mmcblk0p5 rw rootwait ignore_loglevel earlyprintk";
30 };
31
32 memory@30000000 {
33 device_type = "memory";
34 reg = <0x30000000 0x05000000
35 0x40000000 0x10000000
36 0x50000000 0x08000000>;
37 };
38
39 regulators {
40 compatible = "simple-bus";
41 #address-cells = <1>;
42 #size-cells = <0>;
43
44 vtf_reg: fixed-regulator@0 {
45 compatible = "regulator-fixed";
46 regulator-name = "V_TF_2.8V";
47 regulator-min-microvolt = <2800000>;
48 regulator-max-microvolt = <2800000>;
49 reg = <0>;
50 gpio = <&mp05 4 0>;
51 enable-active-high;
52 };
53
54 pda_reg: fixed-regulator@1 {
55 compatible = "regulator-fixed";
56 regulator-name = "VCC_1.8V_PDA";
57 regulator-min-microvolt = <1800000>;
58 regulator-max-microvolt = <1800000>;
59 reg = <1>;
60 };
61
62 bat_reg: fixed-regulator@2 {
63 compatible = "regulator-fixed";
64 regulator-name = "V_BAT";
65 regulator-min-microvolt = <3700000>;
66 regulator-max-microvolt = <3700000>;
67 reg = <2>;
68 };
69
70 tsp_reg: fixed-regulator@3 {
71 compatible = "regulator-fixed";
72 regulator-name = "TSP_VDD";
73 regulator-min-microvolt = <2800000>;
74 regulator-max-microvolt = <2800000>;
75 reg = <3>;
76 gpio = <&gpj1 3 0>;
77 enable-active-high;
78 };
79 };
80
81 i2c_pmic: i2c-pmic {
82 compatible = "i2c-gpio";
83 gpios = <&gpj4 0 0>, /* sda */
84 <&gpj4 3 0>; /* scl */
85 i2c-gpio,delay-us = <2>; /* ~100 kHz */
86 #address-cells = <1>;
87 #size-cells = <0>;
88
89 pmic@66 {
90 compatible = "national,lp3974";
91 reg = <0x66>;
92
93 max8998,pmic-buck1-default-dvs-idx = <0>;
94 max8998,pmic-buck1-dvs-gpios = <&gph0 3 0>,
95 <&gph0 4 0>;
96 max8998,pmic-buck1-dvs-voltage = <1200000>, <1200000>,
97 <1200000>, <1200000>;
98
99 max8998,pmic-buck2-default-dvs-idx = <0>;
100 max8998,pmic-buck2-dvs-gpio = <&gph0 5 0>;
101 max8998,pmic-buck2-dvs-voltage = <1200000>, <1200000>;
102
103 regulators {
104 ldo2_reg: LDO2 {
105 regulator-name = "VALIVE_1.1V";
106 regulator-min-microvolt = <1100000>;
107 regulator-max-microvolt = <1100000>;
108 regulator-always-on;
109 };
110
111 ldo3_reg: LDO3 {
112 regulator-name = "VUSB+MIPI_1.1V";
113 regulator-min-microvolt = <1100000>;
114 regulator-max-microvolt = <1100000>;
115 regulator-always-on;
116 };
117
118 ldo4_reg: LDO4 {
119 regulator-name = "VADC_3.3V";
120 regulator-min-microvolt = <3300000>;
121 regulator-max-microvolt = <3300000>;
122 };
123
124 ldo5_reg: LDO5 {
125 regulator-name = "VTF_2.8V";
126 regulator-min-microvolt = <2800000>;
127 regulator-max-microvolt = <2800000>;
128 };
129
130 ldo6_reg: LDO6 {
131 regulator-name = "VCC_3.3V";
132 regulator-min-microvolt = <3300000>;
133 regulator-max-microvolt = <3300000>;
134 };
135
136 ldo7_reg: LDO7 {
137 regulator-name = "VLCD_1.8V";
138 regulator-min-microvolt = <1800000>;
139 regulator-max-microvolt = <1800000>;
140 regulator-always-on;
141 };
142
143 ldo8_reg: LDO8 {
144 regulator-name = "VUSB+VDAC_3.3V";
145 regulator-min-microvolt = <3300000>;
146 regulator-max-microvolt = <3300000>;
147 };
148
149 ldo9_reg: LDO9 {
150 regulator-name = "VCC+VCAM_2.8V";
151 regulator-min-microvolt = <2800000>;
152 regulator-max-microvolt = <2800000>;
153 };
154
155 ldo10_reg: LDO10 {
156 regulator-name = "VPLL_1.1V";
157 regulator-min-microvolt = <1100000>;
158 regulator-max-microvolt = <1100000>;
159 regulator-boot-on;
160 };
161
162 ldo11_reg: LDO11 {
163 regulator-name = "CAM_IO_2.8V";
164 regulator-min-microvolt = <2800000>;
165 regulator-max-microvolt = <2800000>;
166 };
167
168 ldo12_reg: LDO12 {
169 regulator-name = "CAM_ISP_1.2V";
170 regulator-min-microvolt = <1200000>;
171 regulator-max-microvolt = <1200000>;
172 };
173
174 ldo13_reg: LDO13 {
175 regulator-name = "CAM_A_2.8V";
176 regulator-min-microvolt = <2800000>;
177 regulator-max-microvolt = <2800000>;
178 };
179
180 ldo14_reg: LDO14 {
181 regulator-name = "CAM_CIF_1.8V";
182 regulator-min-microvolt = <1800000>;
183 regulator-max-microvolt = <1800000>;
184 };
185
186 ldo15_reg: LDO15 {
187 regulator-name = "CAM_AF_3.3V";
188 regulator-min-microvolt = <3300000>;
189 regulator-max-microvolt = <3300000>;
190 };
191
192 ldo16_reg: LDO16 {
193 regulator-name = "VMIPI_1.8V";
194 regulator-min-microvolt = <1800000>;
195 regulator-max-microvolt = <1800000>;
196 };
197
198 ldo17_reg: LDO17 {
199 regulator-name = "CAM_8M_1.8V";
200 regulator-min-microvolt = <1800000>;
201 regulator-max-microvolt = <1800000>;
202 regulator-always-on;
203 };
204
205 buck1_reg: BUCK1 {
206 regulator-name = "VARM_1.2V";
207 regulator-min-microvolt = <1200000>;
208 regulator-max-microvolt = <1200000>;
209 };
210
211 buck2_reg: BUCK2 {
212 regulator-name = "VINT_1.2V";
213 regulator-min-microvolt = <1200000>;
214 regulator-max-microvolt = <1200000>;
215 };
216
217 buck3_reg: BUCK3 {
218 regulator-name = "VCC_1.8V";
219 regulator-min-microvolt = <1800000>;
220 regulator-max-microvolt = <1800000>;
221 regulator-always-on;
222 };
223
224 buck4_reg: BUCK4 {
225 regulator-name = "CAM_CORE_1.2V";
226 regulator-min-microvolt = <1200000>;
227 regulator-max-microvolt = <1200000>;
228 regulator-always-on;
229 };
230 };
231 };
232 };
233
234 gpio-keys {
235 compatible = "gpio-keys";
236
237 power-key {
238 gpios = <&gph2 6 1>;
239 linux,code = <KEY_POWER>;
240 label = "power";
241 debounce-interval = <1>;
242 wakeup-source;
243 };
244 };
245};
246
247&xusbxti {
248 clock-frequency = <24000000>;
249};
250
251&keypad {
252 linux,input-no-autorepeat;
253 wakeup-source;
254 samsung,keypad-num-rows = <3>;
255 samsung,keypad-num-columns = <3>;
256 pinctrl-names = "default";
257 pinctrl-0 = <&keypad_row0>, <&keypad_row1>, <&keypad_row2>,
258 <&keypad_col0>, <&keypad_col1>, <&keypad_col2>;
259 status = "okay";
260
261 key_1 {
262 keypad,row = <0>;
263 keypad,column = <1>;
264 linux,code = <KEY_CONNECT>;
265 };
266
267 key_2 {
268 keypad,row = <0>;
269 keypad,column = <2>;
270 linux,code = <KEY_BACK>;
271 };
272
273 key_3 {
274 keypad,row = <1>;
275 keypad,column = <1>;
276 linux,code = <KEY_CAMERA_FOCUS>;
277 };
278
279 key_4 {
280 keypad,row = <1>;
281 keypad,column = <2>;
282 linux,code = <KEY_VOLUMEUP>;
283 };
284
285 key_5 {
286 keypad,row = <2>;
287 keypad,column = <1>;
288 linux,code = <KEY_CAMERA>;
289 };
290
291 key_6 {
292 keypad,row = <2>;
293 keypad,column = <2>;
294 linux,code = <KEY_VOLUMEDOWN>;
295 };
296};
297
298&uart0 {
299 status = "okay";
300};
301
302&uart1 {
303 status = "okay";
304};
305
306&uart2 {
307 status = "okay";
308};
309
310&uart3 {
311 status = "okay";
312};
313
314&sdhci0 {
315 bus-width = <4>;
316 non-removable;
317 vmmc-supply = <&ldo5_reg>;
318 pinctrl-0 = <&sd0_clk &sd0_cmd &sd0_cd &sd0_bus1 &sd0_bus4>;
319 pinctrl-names = "default";
320 status = "okay";
321};
322
323&sdhci2 {
324 bus-width = <4>;
325 cd-gpios = <&gph3 4 1>;
326 vmmc-supply = <&vtf_reg>;
327 cd-inverted;
328 pinctrl-0 = <&sd2_clk &sd2_cmd &sd2_bus4>;
329 pinctrl-names = "default";
330 status = "okay";
331};
332
333&hsotg {
334 vusb_a-supply = <&ldo3_reg>;
335 vusb_d-supply = <&ldo8_reg>;
336 dr_mode = "peripheral";
337 status = "okay";
338};
339
340&usbphy {
341 status = "okay";
342};
343
344&i2c2 {
345 samsung,i2c-sda-delay = <100>;
346 samsung,i2c-max-bus-freq = <400000>;
347 samsung,i2c-slave-addr = <0x10>;
348 status = "okay";
349
350 tsp@4a {
351 compatible = "atmel,maxtouch";
352 reg = <0x4a>;
353 interrupt-parent = <&gpj0>;
354 interrupts = <5 2>;
355
356 atmel,x-line = <17>;
357 atmel,y-line = <11>;
358 atmel,x-size = <800>;
359 atmel,y-size = <480>;
360 atmel,burst-length = <0x21>;
361 atmel,threshold = <0x28>;
362 atmel,orientation = <1>;
363
364 vdd-supply = <&tsp_reg>;
365 };
366};
367
368&i2c0 {
369 samsung,i2c-sda-delay = <100>;
370 samsung,i2c-max-bus-freq = <100000>;
371 samsung,i2c-slave-addr = <0x10>;
372 status = "okay";
373
374 noon010pc30: sensor@30 {
375 compatible = "siliconfile,noon010pc30";
376 reg = <0x30>;
377 vddio-supply = <&ldo11_reg>;
378 vdda-supply = <&ldo13_reg>;
379 vdd_core-supply = <&ldo14_reg>;
380
381 clock-frequency = <16000000>;
382 clocks = <&clock_cam 0>;
383 clock-names = "mclk";
384 nreset-gpios = <&gpb 2 0>;
385 nstby-gpios = <&gpb 0 0>;
386
387 port {
388 noon010pc30_ep: endpoint {
389 remote-endpoint = <&fimc0_ep>;
390 bus-width = <8>;
391 hsync-active = <0>;
392 vsync-active = <1>;
393 pclk-sample = <1>;
394 };
395 };
396 };
397};
398
399&camera {
400 pinctrl-0 = <&cam_port_a_io &cam_port_a_clk_active>;
401 pinctrl-1 = <&cam_port_a_io &cam_port_a_clk_idle>;
402 pinctrl-names = "default", "idle";
403
404 parallel-ports {
405 #address-cells = <1>;
406 #size-cells = <0>;
407
408 /* camera A input */
409 port@1 {
410 reg = <1>;
411 fimc0_ep: endpoint {
412 remote-endpoint = <&noon010pc30_ep>;
413 bus-width = <8>;
414 hsync-active = <1>;
415 vsync-active = <1>;
416 pclk-sample = <0>;
417 };
418 };
419 };
420};
421
422&fimd {
423 pinctrl-0 = <&lcd_clk &lcd_data24>;
424 pinctrl-names = "default";
425 status = "okay";
426
427 display-timings {
428 native-mode = <&timing0>;
429 timing0: timing {
430 /* 480x800@55Hz */
431 clock-frequency = <23439570>;
432 hactive = <480>;
433 hfront-porch = <16>;
434 hback-porch = <16>;
435 hsync-len = <2>;
436 vactive = <800>;
437 vback-porch = <2>;
438 vfront-porch = <28>;
439 vsync-len = <1>;
440 hsync-active = <0>;
441 vsync-active = <0>;
442 de-active = <0>;
443 pixelclk-active = <0>;
444 };
445 };
446};
447
448&onenand {
449 status = "okay";
450};