Linux Audio

Check our new training course

Loading...
v4.17
  1/*
  2 * Device Tree Source for the Koelsch board
  3 *
  4 * Copyright (C) 2013 Renesas Electronics Corporation
  5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
  6 * Copyright (C) 2014 Cogent Embedded, Inc.
  7 *
  8 * This file is licensed under the terms of the GNU General Public License
  9 * version 2.  This program is licensed "as is" without any warranty of any
 10 * kind, whether express or implied.
 11 */
 12
 13/*
 14 * SSI-AK4643
 15 *
 16 * SW1: 1: AK4643
 17 *      2: CN22
 18 *      3: ADV7511
 19 *
 20 * This command is required when Playback/Capture
 21 *
 22 *	amixer set "LINEOUT Mixer DACL" on
 23 *	amixer set "DVC Out" 100%
 24 *	amixer set "DVC In" 100%
 25 *
 26 * You can use Mute
 27 *
 28 *	amixer set "DVC Out Mute" on
 29 *	amixer set "DVC In Mute" on
 30 *
 31 * You can use Volume Ramp
 32 *
 33 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 34 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 35 *	amixer set "DVC Out Ramp" on
 36 *	aplay xxx.wav &
 37 *	amixer set "DVC Out"  80%  // Volume Down
 38 *	amixer set "DVC Out" 100%  // Volume Up
 39 */
 40
 41/dts-v1/;
 42#include "r8a7791.dtsi"
 43#include <dt-bindings/gpio/gpio.h>
 44#include <dt-bindings/input/input.h>
 45
 46/ {
 47	model = "Koelsch";
 48	compatible = "renesas,koelsch", "renesas,r8a7791";
 49
 50	aliases {
 51		serial0 = &scif0;
 52		serial1 = &scif1;
 53		i2c9 = &gpioi2c1;
 54		i2c10 = &gpioi2c2;
 55		i2c11 = &gpioi2c4;
 56		i2c12 = &i2cexio1;
 57		i2c13 = &i2chdmi;
 58		i2c14 = &i2cexio4;
 59	};
 60
 61	chosen {
 62		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 63		stdout-path = "serial0:115200n8";
 64	};
 65
 66	memory@40000000 {
 67		device_type = "memory";
 68		reg = <0 0x40000000 0 0x40000000>;
 69	};
 70
 71	memory@200000000 {
 72		device_type = "memory";
 73		reg = <2 0x00000000 0 0x40000000>;
 74	};
 75
 76	lbsc {
 77		#address-cells = <1>;
 78		#size-cells = <1>;
 79	};
 80
 81	keyboard {
 82		compatible = "gpio-keys";
 83
 84		key-1 {
 85			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 86			linux,code = <KEY_1>;
 87			label = "SW2-1";
 88			wakeup-source;
 89			debounce-interval = <20>;
 90		};
 91		key-2 {
 92			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 93			linux,code = <KEY_2>;
 94			label = "SW2-2";
 95			wakeup-source;
 96			debounce-interval = <20>;
 97		};
 98		key-3 {
 99			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
100			linux,code = <KEY_3>;
101			label = "SW2-3";
102			wakeup-source;
103			debounce-interval = <20>;
104		};
105		key-4 {
106			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
107			linux,code = <KEY_4>;
108			label = "SW2-4";
109			wakeup-source;
110			debounce-interval = <20>;
111		};
112		key-a {
113			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
114			linux,code = <KEY_A>;
115			label = "SW30";
116			wakeup-source;
117			debounce-interval = <20>;
118		};
119		key-b {
120			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
121			linux,code = <KEY_B>;
122			label = "SW31";
123			wakeup-source;
124			debounce-interval = <20>;
125		};
126		key-c {
127			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
128			linux,code = <KEY_C>;
129			label = "SW32";
130			wakeup-source;
131			debounce-interval = <20>;
132		};
133		key-d {
134			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
135			linux,code = <KEY_D>;
136			label = "SW33";
137			wakeup-source;
138			debounce-interval = <20>;
139		};
140		key-e {
141			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
142			linux,code = <KEY_E>;
143			label = "SW34";
144			wakeup-source;
145			debounce-interval = <20>;
146		};
147		key-f {
148			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
149			linux,code = <KEY_F>;
150			label = "SW35";
151			wakeup-source;
152			debounce-interval = <20>;
153		};
154		key-g {
155			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
156			linux,code = <KEY_G>;
157			label = "SW36";
158			wakeup-source;
159			debounce-interval = <20>;
160		};
161	};
162
163	leds {
164		compatible = "gpio-leds";
165		led6 {
166			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
167			label = "LED6";
168		};
169		led7 {
170			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
171			label = "LED7";
172		};
173		led8 {
174			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
175			label = "LED8";
176		};
177	};
178
179	vcc_sdhi0: regulator-vcc-sdhi0 {
180		compatible = "regulator-fixed";
181
182		regulator-name = "SDHI0 Vcc";
183		regulator-min-microvolt = <3300000>;
184		regulator-max-microvolt = <3300000>;
185
186		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
187		enable-active-high;
188	};
189
190	vccq_sdhi0: regulator-vccq-sdhi0 {
191		compatible = "regulator-gpio";
192
193		regulator-name = "SDHI0 VccQ";
194		regulator-min-microvolt = <1800000>;
195		regulator-max-microvolt = <3300000>;
196
197		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
198		gpios-states = <1>;
199		states = <3300000 1
200			  1800000 0>;
201	};
202
203	vcc_sdhi1: regulator-vcc-sdhi1 {
204		compatible = "regulator-fixed";
205
206		regulator-name = "SDHI1 Vcc";
207		regulator-min-microvolt = <3300000>;
208		regulator-max-microvolt = <3300000>;
209
210		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
211		enable-active-high;
212	};
213
214	vccq_sdhi1: regulator-vccq-sdhi1 {
215		compatible = "regulator-gpio";
216
217		regulator-name = "SDHI1 VccQ";
218		regulator-min-microvolt = <1800000>;
219		regulator-max-microvolt = <3300000>;
220
221		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
222		gpios-states = <1>;
223		states = <3300000 1
224			  1800000 0>;
225	};
226
227	vcc_sdhi2: regulator-vcc-sdhi2 {
228		compatible = "regulator-fixed";
229
230		regulator-name = "SDHI2 Vcc";
231		regulator-min-microvolt = <3300000>;
232		regulator-max-microvolt = <3300000>;
233
234		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
235		enable-active-high;
236	};
237
238	vccq_sdhi2: regulator-vccq-sdhi2 {
239		compatible = "regulator-gpio";
240
241		regulator-name = "SDHI2 VccQ";
242		regulator-min-microvolt = <1800000>;
243		regulator-max-microvolt = <3300000>;
244
245		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
246		gpios-states = <1>;
247		states = <3300000 1
248			  1800000 0>;
249	};
250
251	audio_clock: audio_clock {
252		compatible = "fixed-clock";
253		#clock-cells = <0>;
254		clock-frequency = <11289600>;
255	};
256
257	rsnd_ak4643: sound {
258		compatible = "simple-audio-card";
259
260		simple-audio-card,format = "left_j";
261		simple-audio-card,bitclock-master = <&sndcodec>;
262		simple-audio-card,frame-master = <&sndcodec>;
263
264		sndcpu: simple-audio-card,cpu {
265			sound-dai = <&rcar_sound>;
266		};
267
268		sndcodec: simple-audio-card,codec {
269			sound-dai = <&ak4643>;
270			clocks = <&audio_clock>;
271		};
272	};
273
274	hdmi-in {
275		compatible = "hdmi-connector";
276		type = "a";
277
278		port {
279			hdmi_con_in: endpoint {
280				remote-endpoint = <&adv7612_in>;
281			};
282		};
283	};
284
285	cec_clock: cec-clock {
286		compatible = "fixed-clock";
287		#clock-cells = <0>;
288		clock-frequency = <12000000>;
289	};
290
291	hdmi-out {
292		compatible = "hdmi-connector";
293		type = "a";
294
295		port {
296			hdmi_con_out: endpoint {
297				remote-endpoint = <&adv7511_out>;
298			};
299		};
300	};
301
302	x2_clk: x2-clock {
303		compatible = "fixed-clock";
304		#clock-cells = <0>;
305		clock-frequency = <74250000>;
306	};
307
308	x13_clk: x13-clock {
309		compatible = "fixed-clock";
310		#clock-cells = <0>;
311		clock-frequency = <148500000>;
312	};
313
314	gpioi2c1: i2c-9 {
315		#address-cells = <1>;
316		#size-cells = <0>;
317		compatible = "i2c-gpio";
318		status = "disabled";
319		scl-gpios = <&gpio7 15 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
320		sda-gpios = <&gpio7 16 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
321		i2c-gpio,delay-us = <5>;
322	};
323
324	gpioi2c2: i2c-10 {
325		#address-cells = <1>;
326		#size-cells = <0>;
327		compatible = "i2c-gpio";
328		status = "disabled";
329		scl-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
330		sda-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
331		i2c-gpio,delay-us = <5>;
332	};
333
334	gpioi2c4: i2c-11 {
335		#address-cells = <1>;
336		#size-cells = <0>;
337		compatible = "i2c-gpio";
338		status = "disabled";
339		scl-gpios = <&gpio7 13 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
340		sda-gpios = <&gpio7 14 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>;
341		i2c-gpio,delay-us = <5>;
342	};
343
344	/*
345	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
346	 * A fallback to GPIO is provided.
347	 */
348	i2cexio1: i2c-12 {
349		compatible = "i2c-demux-pinctrl";
350		i2c-parent = <&i2c1>, <&gpioi2c1>;
351		i2c-bus-name = "i2c-exio1";
352		#address-cells = <1>;
353		#size-cells = <0>;
354	};
355
356	/*
357	 * A fallback to GPIO is provided for I2C2.
358	 */
359	i2chdmi: i2c-13 {
360		compatible = "i2c-demux-pinctrl";
361		i2c-parent = <&i2c2>, <&gpioi2c2>;
362		i2c-bus-name = "i2c-hdmi";
363		#address-cells = <1>;
364		#size-cells = <0>;
365
366		ak4643: codec@12 {
367			compatible = "asahi-kasei,ak4643";
368			#sound-dai-cells = <0>;
369			reg = <0x12>;
370		};
371
372		composite-in@20 {
373			compatible = "adi,adv7180";
374			reg = <0x20>;
375			remote = <&vin1>;
376
377			port {
378				adv7180: endpoint {
379					bus-width = <8>;
380					remote-endpoint = <&vin1ep>;
381				};
382			};
383		};
384
385		hdmi@39 {
386			compatible = "adi,adv7511w";
387			reg = <0x39>;
388			interrupt-parent = <&gpio3>;
389			interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
390			clocks = <&cec_clock>;
391			clock-names = "cec";
392
393			adi,input-depth = <8>;
394			adi,input-colorspace = "rgb";
395			adi,input-clock = "1x";
396			adi,input-style = <1>;
397			adi,input-justification = "evenly";
398
399			ports {
400				#address-cells = <1>;
401				#size-cells = <0>;
402
403				port@0 {
404					reg = <0>;
405					adv7511_in: endpoint {
406						remote-endpoint = <&du_out_rgb>;
407					};
408				};
409
410				port@1 {
411					reg = <1>;
412					adv7511_out: endpoint {
413						remote-endpoint = <&hdmi_con_out>;
414					};
415				};
416			};
417		};
418
419		hdmi-in@4c {
420			compatible = "adi,adv7612";
421			reg = <0x4c>;
422			interrupt-parent = <&gpio4>;
423			interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
424			default-input = <0>;
425
426			ports {
427				#address-cells = <1>;
428				#size-cells = <0>;
429
430				port@0 {
431					reg = <0>;
432					adv7612_in: endpoint {
433						remote-endpoint = <&hdmi_con_in>;
434					};
435				};
436
437				port@2 {
438					reg = <2>;
439					adv7612_out: endpoint {
440						remote-endpoint = <&vin0ep2>;
441					};
442				};
443			};
444		};
445
446		eeprom@50 {
447			compatible = "renesas,r1ex24002", "atmel,24c02";
448			reg = <0x50>;
449			pagesize = <16>;
450		};
451	};
452
453	/*
454	 * I2C4 is routed to EXIO connector E, pins 37 (SCL) + 39 (SDA).
455	 * A fallback to GPIO is provided.
456	 */
457	i2cexio4: i2c-14 {
458		compatible = "i2c-demux-pinctrl";
459		i2c-parent = <&i2c4>, <&gpioi2c4>;
460		i2c-bus-name = "i2c-exio4";
461		#address-cells = <1>;
462		#size-cells = <0>;
463	};
464};
465
466&du {
467	pinctrl-0 = <&du_pins>;
468	pinctrl-names = "default";
469	status = "okay";
470
471	clocks = <&cpg CPG_MOD 724>, <&cpg CPG_MOD 723>,
 
 
472		 <&x13_clk>, <&x2_clk>;
473	clock-names = "du.0", "du.1", "dclkin.0", "dclkin.1";
 
474
475	ports {
476		port@0 {
477			endpoint {
478				remote-endpoint = <&adv7511_in>;
479			};
480		};
481	};
482};
483
484&lvds0 {
485	status = "okay";
486
487	ports {
488		port@1 {
489			lvds_connector: endpoint {
490			};
491		};
492	};
493};
494
495&extal_clk {
496	clock-frequency = <20000000>;
497};
498
499&pfc {
500	pinctrl-0 = <&scif_clk_pins>;
501	pinctrl-names = "default";
502
503	i2c1_pins: i2c1 {
504		groups = "i2c1";
505		function = "i2c1";
506	};
507
508	i2c2_pins: i2c2 {
509		groups = "i2c2";
510		function = "i2c2";
511	};
512
513	i2c4_pins: i2c4 {
514		groups = "i2c4_c";
515		function = "i2c4";
516	};
517
518	du_pins: du {
519		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
520		function = "du";
521	};
522
523	scif0_pins: scif0 {
524		groups = "scif0_data_d";
525		function = "scif0";
526	};
527
528	scif1_pins: scif1 {
529		groups = "scif1_data_d";
530		function = "scif1";
531	};
532
533	scif_clk_pins: scif_clk {
534		groups = "scif_clk";
535		function = "scif_clk";
536	};
537
538	ether_pins: ether {
539		groups = "eth_link", "eth_mdio", "eth_rmii";
540		function = "eth";
541	};
542
543	phy1_pins: phy1 {
544		groups = "intc_irq0";
545		function = "intc";
546	};
547
548	sdhi0_pins: sd0 {
549		groups = "sdhi0_data4", "sdhi0_ctrl";
550		function = "sdhi0";
551		power-source = <3300>;
552	};
553
554	sdhi0_pins_uhs: sd0_uhs {
555		groups = "sdhi0_data4", "sdhi0_ctrl";
556		function = "sdhi0";
557		power-source = <1800>;
558	};
559
560	sdhi1_pins: sd1 {
561		groups = "sdhi1_data4", "sdhi1_ctrl";
562		function = "sdhi1";
563		power-source = <3300>;
564	};
565
566	sdhi1_pins_uhs: sd1_uhs {
567		groups = "sdhi1_data4", "sdhi1_ctrl";
568		function = "sdhi1";
569		power-source = <1800>;
570	};
571
572	sdhi2_pins: sd2 {
573		groups = "sdhi2_data4", "sdhi2_ctrl";
574		function = "sdhi2";
575		power-source = <3300>;
576	};
577
578	sdhi2_pins_uhs: sd2_uhs {
579		groups = "sdhi2_data4", "sdhi2_ctrl";
580		function = "sdhi2";
581		power-source = <1800>;
582	};
583
584	qspi_pins: qspi {
585		groups = "qspi_ctrl", "qspi_data4";
586		function = "qspi";
587	};
588
589	msiof0_pins: msiof0 {
590		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
591				 "msiof0_tx";
592		function = "msiof0";
593	};
594
595	usb0_pins: usb0 {
596		groups = "usb0";
597		function = "usb0";
598	};
599
600	usb1_pins: usb1 {
601		groups = "usb1";
602		function = "usb1";
603	};
604
605	vin0_pins: vin0 {
606		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
607		function = "vin0";
608	};
609
610	vin1_pins: vin1 {
611		groups = "vin1_data8", "vin1_clk";
612		function = "vin1";
613	};
614
615	sound_pins: sound {
616		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
617		function = "ssi";
618	};
619
620	sound_clk_pins: sound_clk {
621		groups = "audio_clk_a";
622		function = "audio_clk";
623	};
624};
625
626&ether {
627	pinctrl-0 = <&ether_pins &phy1_pins>;
628	pinctrl-names = "default";
629
630	phy-handle = <&phy1>;
631	renesas,ether-link-active-low;
632	status = "okay";
633
634	phy1: ethernet-phy@1 {
635		reg = <1>;
636		interrupt-parent = <&irqc0>;
637		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
638		micrel,led-mode = <1>;
639	};
640};
641
642&cmt0 {
643	status = "okay";
644};
645
646&sata0 {
647	status = "okay";
648};
649
650&scif0 {
651	pinctrl-0 = <&scif0_pins>;
652	pinctrl-names = "default";
653
654	status = "okay";
655};
656
657&scif1 {
658	pinctrl-0 = <&scif1_pins>;
659	pinctrl-names = "default";
660
661	status = "okay";
662};
663
664&scif_clk {
665	clock-frequency = <14745600>;
 
666};
667
668&sdhi0 {
669	pinctrl-0 = <&sdhi0_pins>;
670	pinctrl-1 = <&sdhi0_pins_uhs>;
671	pinctrl-names = "default", "state_uhs";
672
673	vmmc-supply = <&vcc_sdhi0>;
674	vqmmc-supply = <&vccq_sdhi0>;
675	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
676	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
677	sd-uhs-sdr50;
678	sd-uhs-sdr104;
679	status = "okay";
680};
681
682&sdhi1 {
683	pinctrl-0 = <&sdhi1_pins>;
684	pinctrl-1 = <&sdhi1_pins_uhs>;
685	pinctrl-names = "default", "state_uhs";
686
687	vmmc-supply = <&vcc_sdhi1>;
688	vqmmc-supply = <&vccq_sdhi1>;
689	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
690	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
691	sd-uhs-sdr50;
692	status = "okay";
693};
694
695&sdhi2 {
696	pinctrl-0 = <&sdhi2_pins>;
697	pinctrl-1 = <&sdhi2_pins_uhs>;
698	pinctrl-names = "default", "state_uhs";
699
700	vmmc-supply = <&vcc_sdhi2>;
701	vqmmc-supply = <&vccq_sdhi2>;
702	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
703	sd-uhs-sdr50;
704	status = "okay";
705};
706
707&qspi {
708	pinctrl-0 = <&qspi_pins>;
709	pinctrl-names = "default";
710
711	status = "okay";
712
713	flash: flash@0 {
714		compatible = "spansion,s25fl512s", "jedec,spi-nor";
715		reg = <0>;
716		spi-max-frequency = <30000000>;
717		spi-tx-bus-width = <4>;
718		spi-rx-bus-width = <4>;
719		spi-cpha;
720		spi-cpol;
721		m25p,fast-read;
722
723		partitions {
724			compatible = "fixed-partitions";
725			#address-cells = <1>;
726			#size-cells = <1>;
727
728			partition@0 {
729				label = "loader";
730				reg = <0x00000000 0x00080000>;
731				read-only;
732			};
733			partition@80000 {
734				label = "user";
735				reg = <0x00080000 0x00580000>;
736				read-only;
737			};
738			partition@600000 {
739				label = "flash";
740				reg = <0x00600000 0x03a00000>;
741			};
742		};
743	};
744};
745
746&msiof0 {
747	pinctrl-0 = <&msiof0_pins>;
748	pinctrl-names = "default";
749
750	status = "okay";
751
752	pmic: pmic@0 {
753		compatible = "renesas,r2a11302ft";
754		reg = <0>;
755		spi-max-frequency = <6000000>;
756		spi-cpol;
757		spi-cpha;
758	};
759};
760
761&i2c1 {
762	pinctrl-0 = <&i2c1_pins>;
763	pinctrl-names = "i2c-exio1";
764};
765
766&i2c2 {
767	pinctrl-0 = <&i2c2_pins>;
768	pinctrl-names = "i2c-hdmi";
769
 
770	clock-frequency = <100000>;
771};
772
773&i2c4 {
774	pinctrl-0 = <&i2c4_pins>;
775	pinctrl-names = "i2c-exio4";
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
776};
777
778&i2c6 {
779	status = "okay";
780	clock-frequency = <100000>;
781
782	pmic@58 {
783		compatible = "dlg,da9063";
784		reg = <0x58>;
785		interrupt-parent = <&irqc0>;
786		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
787		interrupt-controller;
788
789		rtc {
790			compatible = "dlg,da9063-rtc";
791		};
792
793		wdt {
794			compatible = "dlg,da9063-watchdog";
795		};
796	};
797
798	vdd_dvfs: regulator@68 {
799		compatible = "dlg,da9210";
800		reg = <0x68>;
801		interrupt-parent = <&irqc0>;
802		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
803
804		regulator-min-microvolt = <1000000>;
805		regulator-max-microvolt = <1000000>;
806		regulator-boot-on;
807		regulator-always-on;
808	};
809};
810
811&pci0 {
812	status = "okay";
813	pinctrl-0 = <&usb0_pins>;
814	pinctrl-names = "default";
815};
816
817&pci1 {
818	status = "okay";
819	pinctrl-0 = <&usb1_pins>;
820	pinctrl-names = "default";
821};
822
823&hsusb {
824	status = "okay";
825	pinctrl-0 = <&usb0_pins>;
826	pinctrl-names = "default";
827	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
828};
829
830&usbphy {
831	status = "okay";
832};
833
834&pcie_bus_clk {
835	clock-frequency = <100000000>;
 
836};
837
838&pciec {
839	status = "okay";
840};
841
842&cpu0 {
843	cpu0-supply = <&vdd_dvfs>;
844};
845
846/* HDMI video input */
847&vin0 {
848	status = "okay";
849	pinctrl-0 = <&vin0_pins>;
850	pinctrl-names = "default";
851
852	port {
853		#address-cells = <1>;
854		#size-cells = <0>;
855
856		vin0ep2: endpoint {
857			remote-endpoint = <&adv7612_out>;
858			bus-width = <24>;
859			hsync-active = <0>;
860			vsync-active = <0>;
861			pclk-sample = <1>;
862			data-active = <1>;
863		};
864	};
865};
866
867/* composite video input */
868&vin1 {
869	status = "okay";
870	pinctrl-0 = <&vin1_pins>;
871	pinctrl-names = "default";
872
873	port {
874		#address-cells = <1>;
875		#size-cells = <0>;
876
877		vin1ep: endpoint {
878			remote-endpoint = <&adv7180>;
879			bus-width = <8>;
880		};
881	};
882};
883
884&rcar_sound {
885	pinctrl-0 = <&sound_pins &sound_clk_pins>;
886	pinctrl-names = "default";
887
888	/* Single DAI */
889	#sound-dai-cells = <0>;
890
891	status = "okay";
892
893	rcar_sound,dai {
894		dai0 {
895			playback = <&ssi0 &src2 &dvc0>;
896			capture  = <&ssi1 &src3 &dvc1>;
897		};
898	};
899};
900
901&ssi1 {
902	shared-pin;
903};
v4.10.11
  1/*
  2 * Device Tree Source for the Koelsch board
  3 *
  4 * Copyright (C) 2013 Renesas Electronics Corporation
  5 * Copyright (C) 2013-2014 Renesas Solutions Corp.
  6 * Copyright (C) 2014 Cogent Embedded, Inc.
  7 *
  8 * This file is licensed under the terms of the GNU General Public License
  9 * version 2.  This program is licensed "as is" without any warranty of any
 10 * kind, whether express or implied.
 11 */
 12
 13/*
 14 * SSI-AK4643
 15 *
 16 * SW1: 1: AK4643
 17 *      2: CN22
 18 *      3: ADV7511
 19 *
 20 * This command is required when Playback/Capture
 21 *
 22 *	amixer set "LINEOUT Mixer DACL" on
 23 *	amixer set "DVC Out" 100%
 24 *	amixer set "DVC In" 100%
 25 *
 26 * You can use Mute
 27 *
 28 *	amixer set "DVC Out Mute" on
 29 *	amixer set "DVC In Mute" on
 30 *
 31 * You can use Volume Ramp
 32 *
 33 *	amixer set "DVC Out Ramp Up Rate"   "0.125 dB/64 steps"
 34 *	amixer set "DVC Out Ramp Down Rate" "0.125 dB/512 steps"
 35 *	amixer set "DVC Out Ramp" on
 36 *	aplay xxx.wav &
 37 *	amixer set "DVC Out"  80%  // Volume Down
 38 *	amixer set "DVC Out" 100%  // Volume Up
 39 */
 40
 41/dts-v1/;
 42#include "r8a7791.dtsi"
 43#include <dt-bindings/gpio/gpio.h>
 44#include <dt-bindings/input/input.h>
 45
 46/ {
 47	model = "Koelsch";
 48	compatible = "renesas,koelsch", "renesas,r8a7791";
 49
 50	aliases {
 51		serial0 = &scif0;
 52		serial1 = &scif1;
 53		i2c9 = &gpioi2c1;
 
 
 54		i2c12 = &i2cexio1;
 
 
 55	};
 56
 57	chosen {
 58		bootargs = "ignore_loglevel rw root=/dev/nfs ip=dhcp";
 59		stdout-path = "serial0:115200n8";
 60	};
 61
 62	memory@40000000 {
 63		device_type = "memory";
 64		reg = <0 0x40000000 0 0x40000000>;
 65	};
 66
 67	memory@200000000 {
 68		device_type = "memory";
 69		reg = <2 0x00000000 0 0x40000000>;
 70	};
 71
 72	lbsc {
 73		#address-cells = <1>;
 74		#size-cells = <1>;
 75	};
 76
 77	keyboard {
 78		compatible = "gpio-keys";
 79
 80		key-1 {
 81			gpios = <&gpio5 0 GPIO_ACTIVE_LOW>;
 82			linux,code = <KEY_1>;
 83			label = "SW2-1";
 84			wakeup-source;
 85			debounce-interval = <20>;
 86		};
 87		key-2 {
 88			gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
 89			linux,code = <KEY_2>;
 90			label = "SW2-2";
 91			wakeup-source;
 92			debounce-interval = <20>;
 93		};
 94		key-3 {
 95			gpios = <&gpio5 2 GPIO_ACTIVE_LOW>;
 96			linux,code = <KEY_3>;
 97			label = "SW2-3";
 98			wakeup-source;
 99			debounce-interval = <20>;
100		};
101		key-4 {
102			gpios = <&gpio5 3 GPIO_ACTIVE_LOW>;
103			linux,code = <KEY_4>;
104			label = "SW2-4";
105			wakeup-source;
106			debounce-interval = <20>;
107		};
108		key-a {
109			gpios = <&gpio7 0 GPIO_ACTIVE_LOW>;
110			linux,code = <KEY_A>;
111			label = "SW30";
112			wakeup-source;
113			debounce-interval = <20>;
114		};
115		key-b {
116			gpios = <&gpio7 1 GPIO_ACTIVE_LOW>;
117			linux,code = <KEY_B>;
118			label = "SW31";
119			wakeup-source;
120			debounce-interval = <20>;
121		};
122		key-c {
123			gpios = <&gpio7 2 GPIO_ACTIVE_LOW>;
124			linux,code = <KEY_C>;
125			label = "SW32";
126			wakeup-source;
127			debounce-interval = <20>;
128		};
129		key-d {
130			gpios = <&gpio7 3 GPIO_ACTIVE_LOW>;
131			linux,code = <KEY_D>;
132			label = "SW33";
133			wakeup-source;
134			debounce-interval = <20>;
135		};
136		key-e {
137			gpios = <&gpio7 4 GPIO_ACTIVE_LOW>;
138			linux,code = <KEY_E>;
139			label = "SW34";
140			wakeup-source;
141			debounce-interval = <20>;
142		};
143		key-f {
144			gpios = <&gpio7 5 GPIO_ACTIVE_LOW>;
145			linux,code = <KEY_F>;
146			label = "SW35";
147			wakeup-source;
148			debounce-interval = <20>;
149		};
150		key-g {
151			gpios = <&gpio7 6 GPIO_ACTIVE_LOW>;
152			linux,code = <KEY_G>;
153			label = "SW36";
154			wakeup-source;
155			debounce-interval = <20>;
156		};
157	};
158
159	leds {
160		compatible = "gpio-leds";
161		led6 {
162			gpios = <&gpio2 19 GPIO_ACTIVE_HIGH>;
163			label = "LED6";
164		};
165		led7 {
166			gpios = <&gpio2 20 GPIO_ACTIVE_HIGH>;
167			label = "LED7";
168		};
169		led8 {
170			gpios = <&gpio2 21 GPIO_ACTIVE_HIGH>;
171			label = "LED8";
172		};
173	};
174
175	vcc_sdhi0: regulator-vcc-sdhi0 {
176		compatible = "regulator-fixed";
177
178		regulator-name = "SDHI0 Vcc";
179		regulator-min-microvolt = <3300000>;
180		regulator-max-microvolt = <3300000>;
181
182		gpio = <&gpio7 17 GPIO_ACTIVE_HIGH>;
183		enable-active-high;
184	};
185
186	vccq_sdhi0: regulator-vccq-sdhi0 {
187		compatible = "regulator-gpio";
188
189		regulator-name = "SDHI0 VccQ";
190		regulator-min-microvolt = <1800000>;
191		regulator-max-microvolt = <3300000>;
192
193		gpios = <&gpio2 12 GPIO_ACTIVE_HIGH>;
194		gpios-states = <1>;
195		states = <3300000 1
196			  1800000 0>;
197	};
198
199	vcc_sdhi1: regulator-vcc-sdhi1 {
200		compatible = "regulator-fixed";
201
202		regulator-name = "SDHI1 Vcc";
203		regulator-min-microvolt = <3300000>;
204		regulator-max-microvolt = <3300000>;
205
206		gpio = <&gpio7 18 GPIO_ACTIVE_HIGH>;
207		enable-active-high;
208	};
209
210	vccq_sdhi1: regulator-vccq-sdhi1 {
211		compatible = "regulator-gpio";
212
213		regulator-name = "SDHI1 VccQ";
214		regulator-min-microvolt = <1800000>;
215		regulator-max-microvolt = <3300000>;
216
217		gpios = <&gpio2 13 GPIO_ACTIVE_HIGH>;
218		gpios-states = <1>;
219		states = <3300000 1
220			  1800000 0>;
221	};
222
223	vcc_sdhi2: regulator-vcc-sdhi2 {
224		compatible = "regulator-fixed";
225
226		regulator-name = "SDHI2 Vcc";
227		regulator-min-microvolt = <3300000>;
228		regulator-max-microvolt = <3300000>;
229
230		gpio = <&gpio7 19 GPIO_ACTIVE_HIGH>;
231		enable-active-high;
232	};
233
234	vccq_sdhi2: regulator-vccq-sdhi2 {
235		compatible = "regulator-gpio";
236
237		regulator-name = "SDHI2 VccQ";
238		regulator-min-microvolt = <1800000>;
239		regulator-max-microvolt = <3300000>;
240
241		gpios = <&gpio2 26 GPIO_ACTIVE_HIGH>;
242		gpios-states = <1>;
243		states = <3300000 1
244			  1800000 0>;
245	};
246
247	audio_clock: audio_clock {
248		compatible = "fixed-clock";
249		#clock-cells = <0>;
250		clock-frequency = <11289600>;
251	};
252
253	rsnd_ak4643: sound {
254		compatible = "simple-audio-card";
255
256		simple-audio-card,format = "left_j";
257		simple-audio-card,bitclock-master = <&sndcodec>;
258		simple-audio-card,frame-master = <&sndcodec>;
259
260		sndcpu: simple-audio-card,cpu {
261			sound-dai = <&rcar_sound>;
262		};
263
264		sndcodec: simple-audio-card,codec {
265			sound-dai = <&ak4643>;
266			clocks = <&audio_clock>;
267		};
268	};
269
270	hdmi-in {
271		compatible = "hdmi-connector";
272		type = "a";
273
274		port {
275			hdmi_con_in: endpoint {
276				remote-endpoint = <&adv7612_in>;
277			};
278		};
279	};
280
 
 
 
 
 
 
281	hdmi-out {
282		compatible = "hdmi-connector";
283		type = "a";
284
285		port {
286			hdmi_con_out: endpoint {
287				remote-endpoint = <&adv7511_out>;
288			};
289		};
290	};
291
292	x2_clk: x2-clock {
293		compatible = "fixed-clock";
294		#clock-cells = <0>;
295		clock-frequency = <148500000>;
296	};
297
298	x13_clk: x13-clock {
299		compatible = "fixed-clock";
300		#clock-cells = <0>;
301		clock-frequency = <148500000>;
302	};
303
304	gpioi2c1: i2c-9 {
305		#address-cells = <1>;
306		#size-cells = <0>;
307		compatible = "i2c-gpio";
308		status = "disabled";
309		gpios = <&gpio7 16 GPIO_ACTIVE_HIGH /* sda */
310			 &gpio7 15 GPIO_ACTIVE_HIGH /* scl */
311			>;
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
312		i2c-gpio,delay-us = <5>;
313	};
314
315	/*
316	 * I2C1 is routed to EXIO connector B, pins 64 (SCL) + 66 (SDA).
317	 * A fallback to GPIO is provided.
318	 */
319	i2cexio1: i2c-12 {
320		compatible = "i2c-demux-pinctrl";
321		i2c-parent = <&i2c1>, <&gpioi2c1>;
322		i2c-bus-name = "i2c-exio1";
323		#address-cells = <1>;
324		#size-cells = <0>;
325	};
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
326};
327
328&du {
329	pinctrl-0 = <&du_pins>;
330	pinctrl-names = "default";
331	status = "okay";
332
333	clocks = <&mstp7_clks R8A7791_CLK_DU0>,
334		 <&mstp7_clks R8A7791_CLK_DU1>,
335		 <&mstp7_clks R8A7791_CLK_LVDS0>,
336		 <&x13_clk>, <&x2_clk>;
337	clock-names = "du.0", "du.1", "lvds.0",
338		      "dclkin.0", "dclkin.1";
339
340	ports {
341		port@0 {
342			endpoint {
343				remote-endpoint = <&adv7511_in>;
344			};
345		};
 
 
 
 
 
 
 
346		port@1 {
347			lvds_connector: endpoint {
348			};
349		};
350	};
351};
352
353&extal_clk {
354	clock-frequency = <20000000>;
355};
356
357&pfc {
358	pinctrl-0 = <&scif_clk_pins>;
359	pinctrl-names = "default";
360
361	i2c1_pins: i2c1 {
362		groups = "i2c1";
363		function = "i2c1";
364	};
365
366	i2c2_pins: i2c2 {
367		groups = "i2c2";
368		function = "i2c2";
369	};
370
 
 
 
 
 
371	du_pins: du {
372		groups = "du_rgb888", "du_sync", "du_disp", "du_clk_out_0";
373		function = "du";
374	};
375
376	scif0_pins: scif0 {
377		groups = "scif0_data_d";
378		function = "scif0";
379	};
380
381	scif1_pins: scif1 {
382		groups = "scif1_data_d";
383		function = "scif1";
384	};
385
386	scif_clk_pins: scif_clk {
387		groups = "scif_clk";
388		function = "scif_clk";
389	};
390
391	ether_pins: ether {
392		groups = "eth_link", "eth_mdio", "eth_rmii";
393		function = "eth";
394	};
395
396	phy1_pins: phy1 {
397		groups = "intc_irq0";
398		function = "intc";
399	};
400
401	sdhi0_pins: sd0 {
402		groups = "sdhi0_data4", "sdhi0_ctrl";
403		function = "sdhi0";
404		power-source = <3300>;
405	};
406
407	sdhi0_pins_uhs: sd0_uhs {
408		groups = "sdhi0_data4", "sdhi0_ctrl";
409		function = "sdhi0";
410		power-source = <1800>;
411	};
412
413	sdhi1_pins: sd1 {
414		groups = "sdhi1_data4", "sdhi1_ctrl";
415		function = "sdhi1";
416		power-source = <3300>;
417	};
418
419	sdhi1_pins_uhs: sd1_uhs {
420		groups = "sdhi1_data4", "sdhi1_ctrl";
421		function = "sdhi1";
422		power-source = <1800>;
423	};
424
425	sdhi2_pins: sd2 {
426		groups = "sdhi2_data4", "sdhi2_ctrl";
427		function = "sdhi2";
428		power-source = <3300>;
429	};
430
431	sdhi2_pins_uhs: sd2_uhs {
432		groups = "sdhi2_data4", "sdhi2_ctrl";
433		function = "sdhi2";
434		power-source = <1800>;
435	};
436
437	qspi_pins: qspi {
438		groups = "qspi_ctrl", "qspi_data4";
439		function = "qspi";
440	};
441
442	msiof0_pins: msiof0 {
443		groups = "msiof0_clk", "msiof0_sync", "msiof0_rx",
444				 "msiof0_tx";
445		function = "msiof0";
446	};
447
448	usb0_pins: usb0 {
449		groups = "usb0";
450		function = "usb0";
451	};
452
453	usb1_pins: usb1 {
454		groups = "usb1";
455		function = "usb1";
456	};
457
458	vin0_pins: vin0 {
459		groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk";
460		function = "vin0";
461	};
462
463	vin1_pins: vin1 {
464		groups = "vin1_data8", "vin1_clk";
465		function = "vin1";
466	};
467
468	sound_pins: sound {
469		groups = "ssi0129_ctrl", "ssi0_data", "ssi1_data";
470		function = "ssi";
471	};
472
473	sound_clk_pins: sound_clk {
474		groups = "audio_clk_a";
475		function = "audio_clk";
476	};
477};
478
479&ether {
480	pinctrl-0 = <&ether_pins &phy1_pins>;
481	pinctrl-names = "default";
482
483	phy-handle = <&phy1>;
484	renesas,ether-link-active-low;
485	status = "okay";
486
487	phy1: ethernet-phy@1 {
488		reg = <1>;
489		interrupt-parent = <&irqc0>;
490		interrupts = <0 IRQ_TYPE_LEVEL_LOW>;
491		micrel,led-mode = <1>;
492	};
493};
494
495&cmt0 {
496	status = "okay";
497};
498
499&sata0 {
500	status = "okay";
501};
502
503&scif0 {
504	pinctrl-0 = <&scif0_pins>;
505	pinctrl-names = "default";
506
507	status = "okay";
508};
509
510&scif1 {
511	pinctrl-0 = <&scif1_pins>;
512	pinctrl-names = "default";
513
514	status = "okay";
515};
516
517&scif_clk {
518	clock-frequency = <14745600>;
519	status = "okay";
520};
521
522&sdhi0 {
523	pinctrl-0 = <&sdhi0_pins>;
524	pinctrl-1 = <&sdhi0_pins_uhs>;
525	pinctrl-names = "default", "state_uhs";
526
527	vmmc-supply = <&vcc_sdhi0>;
528	vqmmc-supply = <&vccq_sdhi0>;
529	cd-gpios = <&gpio6 6 GPIO_ACTIVE_LOW>;
530	wp-gpios = <&gpio6 7 GPIO_ACTIVE_HIGH>;
531	sd-uhs-sdr50;
532	sd-uhs-sdr104;
533	status = "okay";
534};
535
536&sdhi1 {
537	pinctrl-0 = <&sdhi1_pins>;
538	pinctrl-1 = <&sdhi1_pins_uhs>;
539	pinctrl-names = "default", "state_uhs";
540
541	vmmc-supply = <&vcc_sdhi1>;
542	vqmmc-supply = <&vccq_sdhi1>;
543	cd-gpios = <&gpio6 14 GPIO_ACTIVE_LOW>;
544	wp-gpios = <&gpio6 15 GPIO_ACTIVE_HIGH>;
545	sd-uhs-sdr50;
546	status = "okay";
547};
548
549&sdhi2 {
550	pinctrl-0 = <&sdhi2_pins>;
551	pinctrl-1 = <&sdhi2_pins_uhs>;
552	pinctrl-names = "default", "state_uhs";
553
554	vmmc-supply = <&vcc_sdhi2>;
555	vqmmc-supply = <&vccq_sdhi2>;
556	cd-gpios = <&gpio6 22 GPIO_ACTIVE_LOW>;
557	sd-uhs-sdr50;
558	status = "okay";
559};
560
561&qspi {
562	pinctrl-0 = <&qspi_pins>;
563	pinctrl-names = "default";
564
565	status = "okay";
566
567	flash: flash@0 {
568		compatible = "spansion,s25fl512s", "jedec,spi-nor";
569		reg = <0>;
570		spi-max-frequency = <30000000>;
571		spi-tx-bus-width = <4>;
572		spi-rx-bus-width = <4>;
573		spi-cpha;
574		spi-cpol;
575		m25p,fast-read;
576
577		partitions {
578			compatible = "fixed-partitions";
579			#address-cells = <1>;
580			#size-cells = <1>;
581
582			partition@0 {
583				label = "loader";
584				reg = <0x00000000 0x00080000>;
585				read-only;
586			};
587			partition@80000 {
588				label = "user";
589				reg = <0x00080000 0x00580000>;
590				read-only;
591			};
592			partition@600000 {
593				label = "flash";
594				reg = <0x00600000 0x03a00000>;
595			};
596		};
597	};
598};
599
600&msiof0 {
601	pinctrl-0 = <&msiof0_pins>;
602	pinctrl-names = "default";
603
604	status = "okay";
605
606	pmic: pmic@0 {
607		compatible = "renesas,r2a11302ft";
608		reg = <0>;
609		spi-max-frequency = <6000000>;
610		spi-cpol;
611		spi-cpha;
612	};
613};
614
615&i2c1 {
616	pinctrl-0 = <&i2c1_pins>;
617	pinctrl-names = "i2c-exio1";
618};
619
620&i2c2 {
621	pinctrl-0 = <&i2c2_pins>;
622	pinctrl-names = "default";
623
624	status = "okay";
625	clock-frequency = <100000>;
 
626
627	ak4643: codec@12 {
628		compatible = "asahi-kasei,ak4643";
629		#sound-dai-cells = <0>;
630		reg = <0x12>;
631	};
632
633	composite-in@20 {
634		compatible = "adi,adv7180";
635		reg = <0x20>;
636		remote = <&vin1>;
637
638		port {
639			adv7180: endpoint {
640				bus-width = <8>;
641				remote-endpoint = <&vin1ep>;
642			};
643		};
644	};
645
646	hdmi@39 {
647		compatible = "adi,adv7511w";
648		reg = <0x39>;
649		interrupt-parent = <&gpio3>;
650		interrupts = <29 IRQ_TYPE_LEVEL_LOW>;
651
652		adi,input-depth = <8>;
653		adi,input-colorspace = "rgb";
654		adi,input-clock = "1x";
655		adi,input-style = <1>;
656		adi,input-justification = "evenly";
657
658		ports {
659			#address-cells = <1>;
660			#size-cells = <0>;
661
662			port@0 {
663				reg = <0>;
664				adv7511_in: endpoint {
665					remote-endpoint = <&du_out_rgb>;
666				};
667			};
668
669			port@1 {
670				reg = <1>;
671				adv7511_out: endpoint {
672					remote-endpoint = <&hdmi_con_out>;
673				};
674			};
675		};
676	};
677
678	hdmi-in@4c {
679		compatible = "adi,adv7612";
680		reg = <0x4c>;
681		interrupt-parent = <&gpio4>;
682		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
683		default-input = <0>;
684
685		ports {
686			#address-cells = <1>;
687			#size-cells = <0>;
688
689			port@0 {
690				reg = <0>;
691				adv7612_in: endpoint {
692					remote-endpoint = <&hdmi_con_in>;
693				};
694			};
695
696			port@2 {
697				reg = <2>;
698				adv7612_out: endpoint {
699					remote-endpoint = <&vin0ep2>;
700				};
701			};
702		};
703	};
704
705	eeprom@50 {
706		compatible = "renesas,24c02";
707		reg = <0x50>;
708		pagesize = <16>;
709	};
710};
711
712&i2c6 {
713	status = "okay";
714	clock-frequency = <100000>;
715
716	pmic@58 {
717		compatible = "dlg,da9063";
718		reg = <0x58>;
719		interrupt-parent = <&irqc0>;
720		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
721		interrupt-controller;
722
723		rtc {
724			compatible = "dlg,da9063-rtc";
725		};
726
727		wdt {
728			compatible = "dlg,da9063-watchdog";
729		};
730	};
731
732	vdd_dvfs: regulator@68 {
733		compatible = "dlg,da9210";
734		reg = <0x68>;
735		interrupt-parent = <&irqc0>;
736		interrupts = <2 IRQ_TYPE_LEVEL_LOW>;
737
738		regulator-min-microvolt = <1000000>;
739		regulator-max-microvolt = <1000000>;
740		regulator-boot-on;
741		regulator-always-on;
742	};
743};
744
745&pci0 {
746	status = "okay";
747	pinctrl-0 = <&usb0_pins>;
748	pinctrl-names = "default";
749};
750
751&pci1 {
752	status = "okay";
753	pinctrl-0 = <&usb1_pins>;
754	pinctrl-names = "default";
755};
756
757&hsusb {
758	status = "okay";
759	pinctrl-0 = <&usb0_pins>;
760	pinctrl-names = "default";
761	renesas,enable-gpio = <&gpio5 31 GPIO_ACTIVE_HIGH>;
762};
763
764&usbphy {
765	status = "okay";
766};
767
768&pcie_bus_clk {
769	clock-frequency = <100000000>;
770	status = "okay";
771};
772
773&pciec {
774	status = "okay";
775};
776
777&cpu0 {
778	cpu0-supply = <&vdd_dvfs>;
779};
780
781/* HDMI video input */
782&vin0 {
783	status = "okay";
784	pinctrl-0 = <&vin0_pins>;
785	pinctrl-names = "default";
786
787	port {
788		#address-cells = <1>;
789		#size-cells = <0>;
790
791		vin0ep2: endpoint {
792			remote-endpoint = <&adv7612_out>;
793			bus-width = <24>;
794			hsync-active = <0>;
795			vsync-active = <0>;
796			pclk-sample = <1>;
797			data-active = <1>;
798		};
799	};
800};
801
802/* composite video input */
803&vin1 {
804	status = "okay";
805	pinctrl-0 = <&vin1_pins>;
806	pinctrl-names = "default";
807
808	port {
809		#address-cells = <1>;
810		#size-cells = <0>;
811
812		vin1ep: endpoint {
813			remote-endpoint = <&adv7180>;
814			bus-width = <8>;
815		};
816	};
817};
818
819&rcar_sound {
820	pinctrl-0 = <&sound_pins &sound_clk_pins>;
821	pinctrl-names = "default";
822
823	/* Single DAI */
824	#sound-dai-cells = <0>;
825
826	status = "okay";
827
828	rcar_sound,dai {
829		dai0 {
830			playback = <&ssi0 &src2 &dvc0>;
831			capture  = <&ssi1 &src3 &dvc1>;
832		};
833	};
834};
835
836&ssi1 {
837	shared-pin;
838};