1// SPDX-License-Identifier: GPL-2.0
 2/ {
 3	chosen {
 4		bootargs = "console=ttyS0,115200n8 earlyprintk";
 5		stdout-path = &uart0;
 6	};
 7
 8	ocp@f1000000 {
 9		pinctrl: pin-controller@10000 {
10			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
11			pinctrl-names = "default";
12
13			pmx_i2c_gpio_sda: pmx-gpio-sda {
14				marvell,pins = "mpp8";
15				marvell,function = "gpio";
16			};
17			pmx_i2c_gpio_scl: pmx-gpio-scl {
18				marvell,pins = "mpp9";
19				marvell,function = "gpio";
20			};
21		};
22
23		serial@12000 {
24			status = "okay";
25		};
26	};
27
28	i2c {
29		compatible = "i2c-gpio";
30		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
31			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
32		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
33	};
34};
35
36&nand {
37	status = "okay";
38	chip-delay = <25>;
39};
40
41&pciec {
42        status = "okay";
43};
44
45&pcie0 {
46	status = "okay";
47};

 
 1/ {
 2	chosen {
 3		bootargs = "console=ttyS0,115200n8 earlyprintk";
 4		stdout-path = &uart0;
 5	};
 6
 7	ocp@f1000000 {
 8		pinctrl: pin-controller@10000 {
 9			pinctrl-0 = < &pmx_i2c_gpio_sda &pmx_i2c_gpio_scl >;
10			pinctrl-names = "default";
11
12			pmx_i2c_gpio_sda: pmx-gpio-sda {
13				marvell,pins = "mpp8";
14				marvell,function = "gpio";
15			};
16			pmx_i2c_gpio_scl: pmx-gpio-scl {
17				marvell,pins = "mpp9";
18				marvell,function = "gpio";
19			};
20		};
21
22		serial@12000 {
23			status = "okay";
24		};
25	};
26
27	i2c {
28		compatible = "i2c-gpio";
29		gpios = < &gpio0 8 GPIO_ACTIVE_HIGH		/* sda */
30			  &gpio0 9 GPIO_ACTIVE_HIGH>;		/* scl */
31		i2c-gpio,delay-us = <2>;	/* ~100 kHz */
32	};
33};
34
35&nand {
36	status = "okay";
37	chip-delay = <25>;
38};
39
40&pciec {
41        status = "okay";
42};
43
44&pcie0 {
45	status = "okay";
46};